| 00:17:28 | MicroChip32 | as things stand, can a complete [basic] linux system be installed on the tux as-is, or does it require additional memory/hd ?? |
| 00:20:08 | file | MicroChip32: it would need additional space... |
| 00:20:31 | MicroChip32 | how much, if any, can be put on the tux as is ? |
| 00:20:56 | file | I personally don't have one, but I think it has a CompactFlash slot. |
| 00:21:01 | file | so you can possibly use that for space |
| 00:21:15 | MicroChip32 | yes, mine came with a CF in it |
| 00:21:38 | file | however big you can get a CompactFlash card.... is what you can have, plus 4MB onboard |
| 00:23:09 | MicroChip32 | what pcmcia types/brands would be suitable for pcmcia hd and/or nic ? |
| 00:23:40 | file | the PCMCIA slot is ... not very good |
| 00:24:17 | file | an IBM microdrive |
| 00:24:30 | file | that works |
| 00:24:44 | file | MicroChip32: http://tuxscreen.net/wiki/view/Main/PCMCIA |
| 00:24:46 | MicroChip32 | is this 3v or 5v as-is, i remember there was a mod, but dont remember which way |
| 00:24:57 | file | 3.3v |
| 00:25:22 | MicroChip32 | so in theory at least any 3.3v hd/nic pcmcia ~should~ work right ? |
| 00:25:36 | file | yeah... |
| 00:25:41 | file | but don't bet. |
| 00:26:46 | MicroChip32 | hehe thx for da url |
| 00:26:53 | file | your welcome. |
| 00:28:21 | MicroChip32 | for the CF, is there any limitations or will any cf card work in the expansion slot |
| 00:28:35 | file | shrugs |
| 00:41:27 | ccfpark | I'm having trouble with talking to my Shannon via infernoRemote - I'm on a MandrakeLinux box running 2.4.6 - The shannon is on com1 (ttyS0) - I run emu and type "bind -a '#t' /dev" then "rdp -s9600 -r" and I get a sending reset message and nothing |
| 00:47:13 | file | bad cable? |
| 00:47:22 | file | shrugs |
| 00:47:51 | Dr_Xenon | what's the command to go online in minicom? |
| 00:49:38 | GPSFan | ccfpark: be sure you got the working linuxemu: http://tuxscreen.net/download/inferno/linuxemu.gz |
| 00:56:22 | ccfpark | I have the emu from tuxscreen.net. I renamed the existing emu to emu.old and copied linuxemu in its place |
| 00:57:16 | BZFlag | yeah, he would not get that far if he did not have the right emu. |
| 00:57:23 | BZFlag | ccfpark: you are non-root? |
| 00:58:13 | BZFlag | and you have read/write access to /dev/ttyS0 ? |
| 00:58:53 | BZFlag | and you have a null modem cable connected from com1 on the PC to the serial jack on the back of the phone? |
| 01:00:30 | ccfpark | I am using a non-root account and I can use minicom without a problem - I have a serial cable connected from com1 on the PC to the serial port on the back of the shannon |
| 01:06:54 | Dr_Xenon | i've read the man page, but i still don't know how to make minicom go online with a null modem cable. can anyone advise? |
| 01:06:55 | ccfpark | What should be on the shannon's screen when I attempt to connect |
| 01:20:36 | BZFlag | Dr_Xenon: turn off hardware handshaking. ctrl-a,p if I recal correctly. |
| 01:20:44 | BZFlag | ccfpark: it should be black. |
| 01:21:14 | BZFlag | then it goes to a blue screen with white text when it connects. |
| 01:23:42 | ccfpark | right now I have a screen titled "Software Download" - It has a phone number and IP address on it and three buttons (Connect, Details and Cancel) |
| 01:31:29 | Dr_Xenon | joy. blob prompt blinking away in the other window. thanks to everyone for helping me out. |
| 01:33:04 | BZFlag | ccfpark: that's why you can't talk to the shannon |
| 01:33:23 | BZFlag | ccfpark: reboot, hit esc while fading, then hit 2 |
| 01:33:27 | ccfpark | How do I get the shannon to the black screen? |
| 01:33:32 | BZFlag | then it will reboot into normal mode. |
| 01:33:57 | BZFlag | once in normal mode, reboot again, hit esc while fading, then hit ctrl-a |
| 01:34:36 | BZFlag | Dr_Xenon: woohoo! you betcha. let the hacking begin. ;-) |
| 01:34:46 | BZFlag | back later. |
| 01:41:22 | Dr_Xenon | hee. the blob status commmand says it uses 30 GB of memory. that's a serious bootloader. :-) |
| 02:22:58 | Dr_Xenon | in the InstallingLinux procedure (tuxscreen.net/wiki/view/Main/InstallingLinux) i have a file called tuxscreen-kernel, which i downloaded from /download/v0.5 . does this kernel file need to be gzipped before uploading to the tux, as the InstallingLinux procedure implies? |
| 02:30:30 | spd_racer911 | david says hello |
| 02:33:43 | Dr_Xenon | okay, i figured out that tuxscreen-kernel is already compressed. the command line i'm using is "uuencode tuxscreen-kernel foo > /dev/modem" . i can't get the expected progress dots in the minicom window. after the uuencode finishes (apparently successfully) i switch back to 9600, and when i do "flash kernel" the tux whines "no kernel downloaded." |
| 02:34:14 | andersee | why /dev/modem? |
| 02:43:34 | Dr_Xenon | can anyone "hear" me? |
| 02:43:38 | spd_racer911 | hep |
| 02:43:39 | andersee | yup |
| 02:43:43 | spd_racer911 | yep |
| 02:43:51 | andersee | uh huh |
| 02:44:25 | Dr_Xenon | good. i hate windows and its little dog mirc, too. |
| 02:44:53 | Dr_Xenon | as i was saying, /dev/modem is a soft link for /dev/ttyS0 |
| 02:45:54 | andersee | k |
| 02:46:29 | andersee | Umm. Do you have a version of blob installed that needs you to switch to 9600? |
| 02:46:35 | andersee | Where did blob come from |
| 02:46:36 | andersee | ? |
| 02:47:06 | Dr_Xenon | blob version is 2.0.4; i think i got it from the netherlands. |
| 02:48:02 | GPSFan | Dr_Xenon: did your nick come from a Capt Zilog comic book? |
| 02:48:54 | Dr_Xenon | nope, it came from high school. it's a long story involving beer, hookers and a chicken. |
| 02:49:24 | Dr_Xenon | umm, this isn't being logged anywhere, is it? |
| 02:49:35 | GPSFan | Dr_Xenon: it is... |
| 02:50:30 | GPSFan | Dr_Xenon: I thought the name of the bad guy in the one and only issue of the Capt Zilog comic series was Dr. Xenon. I'll have to search for my copy. |
| 02:51:30 | Dr_Xenon | hee. that would be great; i have a grossly overeducated friend that collects comic books to read at his network administration job. |
| 02:52:18 | Dr_Xenon | "job" isn't quite the word for what he has; it implies effort of some kind. |
| 02:55:53 | andersee | brb |
| 03:06:21 | spd_racer911 | hey, I almost have Familiar working...pivot_root is working...this is cool! |
| 03:06:39 | andersee | heh |
| 03:06:42 | andersee | cool beans |
| 03:07:30 | spd_racer911 | yeah! Hey, I also got dynamic linking with libc working...instead of the statically linked 220K hello_world..now it is 4K or so! |
| 03:07:49 | andersee | Ahh. Much better. |
| 03:07:53 | spd_racer911 | however uClibc is still smaller! |
| 03:08:03 | spd_racer911 | great work andersee! |
| 03:08:04 | andersee | And getting smaller by the day. :) |
| 03:08:36 | andersee | any apache gurus present? |
| 03:09:08 | spd_racer911 | not me, but today I discovered my server was being hit with port scanner... |
| 03:09:37 | andersee | I trying to keep googlebot from hitting a certain cpu intensive cgi script (at like 2 hits per second) |
| 03:09:37 | spd_racer911 | I made sure everyhting was locked down and installed PortSentry! |
| 03:11:23 | spd_racer911 | I guess you have seen stuff like: portmap[17075]: connect from 210.178.12.111 to dump(): request from unauthorized host...I guess this is script kiddies knocking?? |
| 03:11:25 | Dr_Xenon | for the record, i solved my problem by using /dev/ttyS0 directly. |
| 03:13:15 | spd_racer911 | anyone know a login and password for Familiar...I remeber seeing it somewhere...? |
| 03:13:51 | Dr_Xenon | is it normal for blob 2.0.4 to say "Received 0 (0x00) bytes" even though it printed a line full of periods? (i'm trying to upload a kernel image.) |
| 03:16:47 | Dr_Xenon | oops. forgot to put the dimm back in after installing blob. i bet that's the problem. |
| 03:20:29 | spd_racer911 | NICK david |
| 03:37:37 | spd_racer911 | ok, the login for Familiar is root, password = rootme! |
| 03:49:05 | Dr_Xenon | is there a known-good version of blob? |
| 03:49:51 | GPSFan | Dr_Xenon: http://tuxscreen.net/download/v0.4/tuxscreen-blob |
| 03:59:57 | Dr_Xenon | thanks. can you flash blob even as you're running it? |
| 04:00:30 | GPSFan | yes, you can even test your download by using the command reblob |
| 04:01:21 | GPSFan | you can't then flash it, so it's not a real test but it will tell you if your downloading works. |
| 04:06:23 | Dr_Xenon | hmm. i always get "Received 0 (0x00) bytes" after seeing the expected row of periods for kernel, ramdisk and blob. flashing any of those hangs the tux, but it always loads blob when i reset. do you have to apply Vpp at any point after the first time you upload blob? |
| 04:07:33 | GPSFan | Dr_Xenon: you should never need the 12V again as long as ALL the sectors were unlocked when you had inferno. |
| 04:07:49 | Dr_Xenon | yah, they were all zero. |
| 04:09:15 | GPSFan | Dr_Xenon: the 0 bytes received is not good, I always get the proper # of bytes that I sent. maybe there is a serial comm problem that is corrupting the data in transit. you are uuencoding it I assume. |
| 04:11:23 | Dr_Xenon | uuencode tuxscreen-blob foo > /dev/ttyS0 (exactly as shown, i.e. i'm writing foo) i'm using no flow control whatsoever; should i use software flow control? |
| 04:12:26 | GPSFan | Dr_Xenon: that's the same command I use, no flow control. |
| 04:15:17 | Dr_Xenon | when you type status at the blob prompt, is the size of the blob image something sensible? (mine says 30 GB) |
| 04:18:29 | GPSFan | Dr_Xenon: where do you see the 30GB, my bolb status doesn't list the size of the image. just the blocksize at 0x00800000 |
| 04:19:39 | Dr_Xenon | i'm using blob 2.0.4; when you type status it gives you a 10-line status report, including the sizes of blob, kernel, ramdisk. |
| 04:20:30 | GPSFan | my blob status says "from flash" for the blob,kernel & ramdisk. |
| 04:20:45 | Dr_Xenon | my strain of blob seems to be very possessive; it's not letting itself be replaced. |
| 04:21:08 | GPSFan | where did you ger it? |
| 04:21:14 | GPSFan | S/GER/GET |
| 04:21:57 | BZFlag | Dr_Xenon: download blog then flash blob does what? |
| 04:21:57 | Dr_Xenon | same place i got my herpes; the netherlands. (http://www.lart.tudelft.nl) |
| 04:22:01 | BZFlag | er blob. |
| 04:22:25 | GPSFan | Dr_Xenon: the tux blob is tweaked from the Lart originals. |
| 04:22:38 | BZFlag | well, a bit. |
| 04:22:53 | BZFlag | the cvs blob works on the tux and the 2.0.4 release did as well. |
| 04:22:58 | Dr_Xenon | download blob says "0 bytes transferred" although i got 3 periods in minicom, and flash blob hangs the tux. |
| 04:23:29 | BZFlag | Dr_Xenon: don't try to flash if 0 bytes were downloaded. |
| 04:23:38 | BZFlag | can you dl and flash otehr things? |
| 04:23:45 | BZFlag | er other.... |
| 04:23:59 | Dr_Xenon | actually, i've tried downloading all three, and they all give "0 bytes transferred" |
| 04:24:12 | Dr_Xenon | downloaded and flashed, that is. |
| 04:24:22 | BZFlag | then I suspect serial trouble or incorrect uuencoding. |
| 04:25:24 | BZFlag | do NOT try to reflash blob until flashing other things works. if you nuke blob now the machine will not boot. |
| 04:25:39 | BZFlag | the only solution will be to do jtag |
| 04:26:20 | BZFlag | course you can always order another phone, and I'll have jtag dongles soon too. |
| 04:26:30 | BZFlag | is being funny |
| 04:27:04 | Dr_Xenon | i have a jtag<->parallel adapter, but no software. do you offer a frequent-flier discount? |
| 04:27:22 | GPSFan | having 2 phones is good, as is a jtag, the software is on the wiki. |
| 04:29:19 | Dr_Xenon | Re: serial , no flow control whatsoever? i'm using minicom 1.83.1 . |
| 04:29:55 | GPSFan | same here. no hw or sw flow control. |
| 04:37:57 | Dr_Xenon | would there be any interest in an open-hardware PCB spin of a modified tuxscreen main board? |
| 04:37:59 | GPSFan | BZFlag: what do you think about Dr_Xenon's blob status reporting blob's size as 30GB? |
| 04:38:28 | BZFlag | Dr_Xenon: perhaps a sa1110 based device, the sa1100 is dead. |
| 04:38:40 | spd_racer911 | Dr_Xenon: yep. |
| 04:38:50 | GPSFan | Dr_Xenon: yep |
| 04:39:19 | BZFlag | Dr_Xenon: the jflash code is in CVS on SF. it may work with your dongle. |
| 04:39:46 | BZFlag | GPSFan: where does it say that?! |
| 04:39:51 | Dr_Xenon | hee. yah, sa1110. my wife would be horrified to learn that i'm talking about my dongle with strangers on the internet. |
| 04:40:17 | BZFlag | heh, pass her the dongle and let her see. |
| 04:40:37 | GPSFan | BZFlag: Dr_Xenon & I were discussing it about 3 min before you re-joined. |
| 04:40:55 | Dr_Xenon | bzflag, when i type status at my 2.0.4 blob prompt, it shows that the blob image is some insanely large size. |
| 04:40:59 | BZFlag | wild. that is not a good sign. |
| 04:41:14 | BZFlag | after downloading? |
| 04:41:23 | BZFlag | it's probably set to -1 |
| 04:41:27 | Dr_Xenon | no, right after booting. |
| 04:41:51 | BZFlag | yeah? it should not show the size unless it's been downloaded. |
| 04:42:09 | BZFlag | your are not running 2.0.5-pre with my status changes are you? |
| 04:43:13 | Dr_Xenon | did you change the version number that it prints out? (mine says 2.0.4) |
| 04:43:51 | BZFlag | yeah, the version in blob cvs has many changes. My changes to "status" output is just one of them. |
| 04:44:49 | BZFlag | status on the version in cvs shows flash and ram locations as well as sizes. |
| 04:44:51 | Dr_Xenon | sorry for the flood... |
| 04:44:53 | Dr_Xenon | blob> status |
| 04:44:53 | Dr_Xenon | Bootloader : blob |
| 04:44:54 | Dr_Xenon | Version : 2.0.4 |
| 04:44:54 | Dr_Xenon | Running from : internal flash |
| 04:44:54 | Dr_Xenon | Blocksize : 0xE2555001 |
| 04:44:54 | Dr_Xenon | Download speed: (unknown) baud |
| 04:44:56 | Dr_Xenon | Blob : downloaded, 3800317953 bytes |
| 04:44:58 | Dr_Xenon | Kernel : from flash |
| 04:45:00 | Dr_Xenon | Ramdisk : from flash |
| 04:45:08 | spd_racer911 | BZFlag: what are the changes in the new blob...why would I want to upgrade when mine works fine ? |
| 04:45:09 | BZFlag | blocksize is just dead wrong. |
| 04:45:22 | BZFlag | you have a bad blob installed. |
| 04:45:41 | Dr_Xenon | fsck. can i repair through jtag? |
| 04:46:02 | BZFlag | spd_racer911: cvs version will soon do xmodem, read the kernel from jffs2, and allow flashing from cf flash cards. |
| 04:46:15 | BZFlag | yes, through jtag only. |
| 04:46:55 | BZFlag | well, I suppose you could desolder the flash chips, burn them in another device and then replace them, but that is a _lot_ more difficult. ;-/ |
| 04:47:11 | spd_racer911 | BZFlag: thanks for the info, sorry to interrupt Dr_Xenon. |
| 04:47:50 | Dr_Xenon | are fine pitch, surface mounted? |
| 04:47:56 | BZFlag | yes |
| 04:48:00 | Dr_Xenon | dream on. |
| 04:48:51 | BZFlag | http://TuxScreen.net/img/mvc-624f.jpg <- bottom right |
| 04:51:08 | BZFlag | a word of advise (to all, as it's too late for you =( ) don't compile your own bootloader and install it without having jtag handy. |
| 04:51:21 | BZFlag | get one that others have tested and is known to work. |
| 05:00:01 | andersee | hey GoRK, long time no see |
| 05:04:05 | GPSFan | spd_racer911: what problems did you run into getting pivot_root working? |
| 13:40:45 | EGg0 | is away: kiln |
| 15:44:18 | BreezyGuy | hello? |
| 16:04:18 | file | hey CosmicPenguin |
| 16:04:19 | CosmicPenguin | Good morning! |
| 16:04:43 | CosmicPenguin | And BTW, in case any one is wondering, I haven't ported the Microwindows TS driver yet... |
| 16:04:52 | CosmicPenguin | I'm waiting for andersee to finish the C++ support first |
| 16:07:04 | CosmicPenguin | has been playing wayyyyy too much Madden 2002 latelly |
| 16:07:47 | rand | indeed |
| 16:47:10 | mallum | CosmicPenguin: happy new year ! |
| 16:58:57 | CosmicPenguin | mallum: Happy new year to you (and to all) |
| 17:49:55 | file | still over 600? bah |
| 17:59:31 | prpplague | file: iq or parking tickets? lol |
| 17:59:58 | file | Tuxscreens :p |
| 18:17:26 | file | peeks in |
| 18:53:13 | as_ | Evnin all. |
| 18:55:46 | CosmicPenguin | Afternoon... :) |
| 18:56:01 | CosmicPenguin | Or rather, "Good afternoon..." |
| 18:56:19 | as_ | Well, I'm not sure if it was or not, I just got up ;] |
| 19:11:14 | | 95 |
| 19:11:14 | CosmicPenguin | ibot: 127 - 32 |
| 19:40:51 | rupert | Hi, I would like to speak with Tim Riker (BZFlag) |
| 19:43:46 | CosmicPenguin | He's not here... can we help you with a question? |
| 19:43:48 | BZFlag | that's me |
| 19:43:56 | BZFlag | sup? |
| 19:44:30 | rupert | Hi Tim, im Robert Kaiser from Germany. I sent you mail about |
| 19:45:01 | rupert | four Tuxscreens I asked you to send quite a while ago, but didnt |
| 19:45:09 | rupert | get any response. |
| 19:45:09 | CosmicPenguin | Holy moly, where did he come from? |
| 19:46:14 | BZFlag | rupert: I replied on nov 16th to the last email I see from you. |
| 19:46:14 | CosmicPenguin | boris: you awake? |
| 19:46:26 | boris | yesh i am |
| 19:46:44 | rupert | Hmm, strange, I sent you two more mails since then. |
| 19:47:09 | CosmicPenguin | boris: Whats the license status on imlib2? |
| 19:47:21 | boris | BSD |
| 19:47:27 | CosmicPenguin | Sweet... |
| 19:47:34 | BZFlag | rupert: your 4 phones shipped back in november. they are still not there. |
| 19:47:54 | boris | yep, thats why i suggested it, if ya look closly you will see me in the AUTHORS file for it :) |
| 19:47:56 | rupert | No, they're not.. |
| 19:48:23 | rupert | In one of the mails I sent you since then, I asked you |
| 19:48:39 | BZFlag | from the same email address? I'll look again.... |
| 19:48:57 | rupert | to doble check this and if possible to provide me with some tracking |
| 19:49:18 | rupert | number/etc. so I can firgure out where the packets might be stuck. |
| 19:49:37 | as2 | If its any sympathy, my phones were shipped around the same time, they havnt arrived in uk yet either. |
| 19:50:00 | CosmicPenguin | boris: Ok, I'll check it out. |
| 19:50:07 | BZFlag | rupert: ah! sorry they got filed. |
| 19:50:31 | BZFlag | rupert: I found two more messages. got lost amid the holidays, new baby and all. |
| 19:51:52 | rupert | Hmm, okay, thats understandable. |
| 19:52:19 | BZFlag | I'll look up the info tonight as it's been a while now. |
| 19:52:21 | rupert | So you say they have been shipped and I should receive them any day now ? |
| 19:52:42 | BZFlag | I recall that the wire transfer got delayed on your end and then that we cleared that up. |
| 19:53:20 | BZFlag | I believe I shipped the phones as soon as the money showed up, but I do not have paper confirmation of that here. |
| 19:53:40 | as2 | I'll send you another email about it BZ, I was ill before christmas and I didnt want to spoil your holidays with shipping problems. |
| 19:53:42 | BZFlag | sorry for loosing your emails! I'll get on this right away and send you an email with whatever I find. |
| 19:54:06 | rupert | OK, thanks a lot!! |
| 19:54:30 | BZFlag | they were to be shipped just airmail right? then there will not be a tracking number. |
| 19:54:50 | BZFlag | they were not shipped economy were they? that would be 4-6 weeks. |
| 19:55:14 | BZFlag | I'll know for certian what happened tomorrow at the latest. I might find my wife to look things up today. |
| 19:55:47 | as2 | Mine were shipped surface, airmail was frighteningly expensive, maybe rupert picked the same. |
| 19:55:58 | rupert | No need for such a hurry, I'm just glad I'm getting a response |
| 19:56:16 | rupert | from you now. I was starting to get worried... |
| 19:56:39 | boris | cos: http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/enlightenment/e17/libs/imlib2/src/rgba.c?rev=1.19&content-type=text/vnd.viewcvs-markup |
| 19:57:02 | rupert | Yes, Indeed I think I chose economy for the same reason.. |
| 19:58:37 | CosmicPenguin | boris: nice.. |
| 19:59:12 | boris | CosmicPenguin: that will do dithered image conversiont to pretty much *any* colourdepth |
| 19:59:16 | boris | from a rtgba buffer |
| 19:59:43 | boris | bbl |
| 20:52:21 | GPSFan_ | BZFlag: I sent your powersupply back today. you should have it by weeks end.. |
| 22:20:40 | Dr_Xenon | i know it's off topic, but what's the difference between an athlon and a duron? is it that the duron has less L1 cache? |
| 22:21:10 | file | That information is unavailable at this time. |
| 22:21:27 | Dr_Xenon | file, get stuffed. |
| 22:21:33 | file | Unknown command. |
| 22:42:47 | jacques | hi ho |
| 22:43:01 | jacques | i miss anything in the last 8 days? |
| 22:43:32 | file | heck no |
| 22:43:45 | jacques | :-\ |
| 22:43:46 | jacques | :-) |
| 22:45:11 | prpplague | jacques: been kinda slow |
| 22:45:30 | prpplague | jacques: however i've been meaning to get with you on the toolchain you created |
| 22:45:35 | prpplague | jacques: maybe tomorrow? |
| 22:55:52 | kernelwork | enters the quiet abyss that is #tuxscreen |
| 22:56:07 | file | sneezes on kernelwork |
| 22:56:13 | kernelwork | doh! |
| 22:56:32 | kernelwork | and I'm almost better from my illness |
| 22:56:41 | file | :p too bad |
| 22:56:49 | file | emptys a dish of rice on top of kernelwork |
| 22:57:05 | kernelwork | Hey, I already had lunch (included rice) |
| 22:57:19 | file | I wonder if there's any rice left... |
| 22:57:50 | BZFlag | GPSFan: thanx. nice work! |
| 22:57:59 | kernelwork | stuffs his leftovers in file's face |
| 22:59:51 | kernelwork | I think I'll leave the computer industry by the time I'm 30... I think working on things in a less conceptual world would be really nice |
| 23:00:08 | file | returns with a bowl of chicken fried rice |
| 23:00:25 | kernelwork | ham fried rice is better... |
| 23:00:38 | file | :P |
| 23:00:51 | kernelwork | sweet 'n sour chicken is really good :) |
| 23:01:25 | file | yup yup yup |
| 23:01:56 | file | eats some onion |
| 23:02:18 | file | yum yum yum |
| 23:02:47 | file | offers kernelwork some |
| 23:02:51 | kernelwork | considers what to eat for dinner... |
| 23:03:03 | kernelwork | accepts the e-chineese |
| 23:03:23 | file | I microwaved it. |
| 23:03:30 | kernelwork | I think this could work on the same premise of ebeer |
| 23:03:54 | kernelwork | My lunch is still sticking with me... |
| 23:04:17 | kernelwork | I finished eating 3 hours ago. I ate at an all you can eat chineese place |
| 23:04:21 | file | uh huh |
| 23:06:34 | signal11 | chinese gourmet. mmmm good |
| 23:06:36 | file | kernelwork: want a Tequila Sunrise? |
| 23:07:35 | kernelwork | I don't drink... Though I like a good ginger beer |
| 23:08:08 | kernelwork | ginger beer is like root beer in practice only it's better |
| 23:11:41 | CosmicPenguin | a good ginger beer..... thats like saying "I like a good Coke" |
| 23:12:04 | kernelwork | If it comes in a bottle and not in a can it's worth calling good |
| 23:12:19 | kernelwork | most of the time... |
