| 01:21.06 | kapookee | Damn. I grunged it. Tried reflashing slugos-4.3-beta over slugos-3.10-beta.. After reboot I get "no route to host" while trying to ssh in. Wont' respond. |
| 01:29.51 | VoodooZ | kapookee: hey, I had the same problem. |
| 01:30.31 | VoodooZ | That's because 4.3 replaced the proprietary intel network drivers with open source ones... |
| 01:31.01 | VoodooZ | which requires only the microcode to be in a special location in flash... |
| 01:32.33 | VoodooZ | you probably used the reflash command to install 4.3 right? |
| 01:32.59 | kapookee | VoodooZ: Yes, I did. |
| 01:33.13 | VoodooZ | the upslug method might fix prevent that. (unles you replaced redboot with apex like me!) |
| 01:34.30 | VoodooZ | that or you could manually overwrite the FIS as I did but that's a bit more complex. |
| 01:35.11 | VoodooZ | (depending on your comfort level of course) |
| 01:36.03 | VoodooZ | try upslug first though as it should completely update the flash... |
| 01:36.03 | VoodooZ | and setup the microcode in the process.. Hope this helps. |
| 01:36.32 | kapookee | So.. could I use upslug2 to install 4.3-beta and then turnup to disk? If it gets too complicated, I'd rather start from scratch (nothing "mission critical" here). |
| 01:37.26 | VoodooZ | I've never used upslug myself but that's your best bet. check the wiki for details. |
| 01:37.35 | VoodooZ | then just turnup ... |
| 01:38.22 | VoodooZ | bbl |
| 01:44.27 | kapookee | ttyl |
| 02:19.49 | *** join/#openslug chx (n=chx@pdpc/supporter/professional/chx) |
| 02:21.14 | chx | if not here, then where should I ask that if someone would run a PHP script on the NSLU2 OpenSlug which PC would it approximately equal? A P II? A P II ? |
| 02:22.25 | NAiL | it's hard to say |
| 02:22.56 | NAiL | since the nslu2 doesn't have floating point at all, some operations are extremely slow |
| 02:23.01 | NAiL | eg. making thumbnails |
| 02:25.04 | chx | hmmmmm there would be very little floating point operations |
| 02:29.15 | NAiL | there might have been someone that already has. Checked the mailinglist archives? |
| 02:29.21 | NAiL | (or the wiki?) |
| 02:29.41 | kapookee | VoodooZ: I flashed the slugos-4.3-beta binary (that I built from HEAD). Still no go. It won't respond. |
| 02:32.37 | *** part/#openslug chx (n=chx@pdpc/supporter/professional/chx) |
| 02:36.55 | kapookee | NAiL: Oh No... makeing thunbNAiLs is very, very slow. :-) |
| 02:37.07 | NAiL | ha-ha :-P |
| 02:37.13 | NAiL | never heard that one before ;) |
| 02:37.22 | *** join/#openslug iOk (n=Sinclair@p54A0A4E0.dip0.t-ipconnect.de) |
| 02:38.32 | *** join/#openslug rwhitby (n=rwhitby@nslu2-linux/rwhitby) |
| 02:48.19 | mwester | Oooh that hurts! |
| 02:50.15 | NAiL | heh |
| 03:04.53 | *** join/#openslug rwhitby (n=rwhitby@nslu2-linux/rwhitby) |
| 04:21.31 | *** join/#openslug joshin (n=joshin@VDSL-130-13-11-75.PHNX.QWEST.NET) |
| 05:09.58 | *** join/#openslug EwU (n=Sinclair@p54A086EE.dip0.t-ipconnect.de) |
| 06:03.11 | VoodooZ | kapookee: First check if the NPE is able to load the microcode on startup. |
| 07:04.14 | *** join/#openslug DaKa (n=David@nslu2-linux/daka) |
| 07:13.35 | *** join/#openslug DrZimmerman (n=theo@84-72-206-49.dclient.hispeed.ch) |
| 08:06.44 | *** join/#openslug jacques (n=jacques@nslu2-linux/jacques) |
| 08:52.09 | *** join/#openslug DaKa (n=David@nslu2-linux/daka) |
| 12:01.26 | *** join/#openslug saladino (n=saladino@55.Red-80-35-102.staticIP.rima-tde.net) |
| 12:01.37 | saladino | hi |
| 12:09.56 | saladino | rwhitby did you get my email? |
| 12:11.44 | rwhitby | yes. likely cause is an _ucslugc override somewhere, which doesn't get triggered now that DISTRO is "slugos" and should be triggered on glibc/uclibc rather than on DISTRO. If you look for that you might find the difference. |
| 12:12.20 | rwhitby | is it also possible that uclibc itself has changed in that time? |
| 12:12.55 | rwhitby | as for the second question, openembedded.org and nslu2-linux.org monotone repositories are identical, and synced every 10 minutes or so. |
| 12:12.58 | saladino | nop, with the old build system and the svn updated it compiles correctly |
| 12:13.34 | saladino | where should i search for diferences? |
| 12:13.48 | saladino | i've been doing some diffs but.. |
| 12:16.35 | rwhitby | dunno - if I'd found them already I would have fixed them :-) |
| 12:16.57 | rwhitby | grep for "_ucslugc" through all files? |
| 12:17.12 | saladino | doing right now |
| 12:17.14 | saladino | :) |
| 13:05.10 | *** join/#openslug pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 13:45.30 | saladino | rwhitby, is it possible that either uclibc or gcc are not compiled in THUMB mode? I am not sure about what is that, but i know that the symbols missing are related with the thumb mode |
| 13:48.46 | saladino | in actual run.do_compile of uclibc at oe_machineinstall : for o in `echo task_do_compile:local:nslu2be:nslu2:ixp4xx:ucslugc:linux-uclibc:armeb:build-linux:fail-fast:pn-uclibc |
| 13:49.18 | saladino | with the old way : for o in `echo task_do_compile:local:nslu2:ixp4xx:ucslugc:slugos:linux-uclibc:armeb:build-linux:fail-fast:thumb:thumb-interwork |
| 13:50.08 | saladino | the uclibc compilation now warns about internetwork support and fails due to missing symbols related to thumb mode |
| 14:05.30 | *** join/#openslug gerdi__ (n=gerdi@dslb-084-059-034-046.pools.arcor-ip.net) |
| 14:11.26 | *** join/#openslug pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 14:34.43 | *** join/#openslug joshin (n=josh@unaffiliated/joshin) |
| 15:01.25 | *** join/#openslug pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 16:44.56 | VoodooZ | rwhitby: hi, is the local.conf customization process different now? I noticed the conf/inc files don't pull SLUG_EXTRA... stuff anymore. |
| 16:45.52 | VoodooZ | I want to add packages in my build w/o changing the main repo. |
| 17:28.31 | *** join/#openslug jacques (n=jacques@nslu2-linux/jacques) |
| 19:05.23 | *** join/#openslug kapookee (n=kapookee@c-69-243-24-15.hsd1.va.comcast.net) |
| 19:17.14 | *** join/#openslug DaKa (n=David@nslu2-linux/daka) |
| 19:53.06 | *** join/#openslug caplink811-log (n=caplink8@dslb-088-073-048-188.pools.arcor-ip.net) |
| 20:38.36 | rwhitby | saladino: I think you found it. |
| 20:39.11 | rwhitby | search for _thumb or _thumb-interwork overrides - looks like they are not being applied due to those things being missing from the OVERRIDES. |
| 22:46.11 | *** join/#openslug rwhitby (n=rwhitby@nslu2-linux/rwhitby) |
| 22:54.18 | *** join/#openslug Eclice (n=sbriole@p54B2F42A.dip.t-dialin.net) |
| 22:57.07 | *** part/#openslug Eclice (n=sbriole@p54B2F42A.dip.t-dialin.net) |
| 23:56.10 | saladino | rwhitby |
| 23:56.10 | saladino | are you there? |
| 23:56.18 | rwhitby | yes |
| 23:56.25 | saladino | hi |
| 23:56.31 | saladino | im trying some things |
| 23:56.35 | saladino | have a question |
| 23:56.56 | saladino | since you told me to changhe target_image in auto.conf to slugos-image |
| 23:57.31 | saladino | and slugos is not a thumb distro |
| 23:58.19 | saladino | i am looking to openmbedded/conf/distro/slugos.conf |
| 23:58.32 | saladino | and to openmbedded/conf/distro/ucslugc.conf |
| 23:58.53 | saladino | and i supose that selecting slugos-image is trying to build a full arm image |
| 23:58.57 | saladino | and not a thumb image |