| 00:01.46 | *** join/#openmoko pablomino (n=pablo@201.215.181.49) |
| 00:07.33 | *** join/#openmoko peter__b (n=peter_b@93.133.209.150) |
| 00:09.45 | *** join/#openmoko ajvogel (n=quassel@196-210-140-211-rrdg-esr-2.dynamic.isadsl.co.za) |
| 00:16.56 | *** part/#openmoko pablomino (n=pablo@201.215.181.49) |
| 00:23.22 | *** join/#openmoko jlmoko (n=jluis@144.Red-83-60-79.dynamicIP.rima-tde.net) |
| 00:31.42 | *** join/#openmoko SpeedEvil (i=1000@tor/regular/SpeedEvil) |
| 00:58.35 | *** join/#openmoko kardan| (n=kardan@p54BE4AA6.dip.t-dialin.net) |
| 01:00.44 | *** join/#openmoko marh1 (n=marius@p54BE4AA6.dip.t-dialin.net) |
| 01:06.27 | *** join/#openmoko Defiant- (i=erik@c134156.adsl.hansenet.de) |
| 01:06.47 | mostly_useless | has anyone played around with solar cells with the freerunner? |
| 01:07.13 | mostly_useless | I'm thinking about finding some small enough and making a replacement back panel. |
| 01:09.24 | *** join/#openmoko nikolajsheller (n=nikolaj@0608ds1-amb.0.fullrate.dk) |
| 01:09.50 | raster | mostly_useless: very unlikely to be able to power it |
| 01:09.59 | raster | just act as an extra small source of power - sure. |
| 01:11.29 | mostly_useless | raster: I disagree. some of the tiny cells I've seen for garden lamps generate almost 100ma/h at 2vdc. a few of them in the correct series, and think you may be able to get a nice trickle charge. |
| 01:11.58 | SpeedEvil | The back panel has an area of approximately 5cm*5cm free. |
| 01:12.24 | mostly_useless | it'd be a neat idea to cope with the discharged battery issue. |
| 01:12.34 | SpeedEvil | Sunlight is 1KW/m^2 ish - and 150W/m^2 once you get past a relatively efficient solar cell. |
| 01:12.42 | raster | u'd need about 2w to safely fully pwoer the gta02 |
| 01:12.50 | raster | maybe 1.5 |
| 01:13.04 | raster | more if u want to charge it |
| 01:13.35 | SpeedEvil | 5cm*5cm is 1/400th of a square meter, or perhaps .35W - in desert sun, pointed at the sun. |
| 01:13.50 | SpeedEvil | Call it .2W - in normal conditions in sunlight. |
| 01:13.52 | raster | yup |
| 01:13.56 | raster | as i said. unlikely to power it |
| 01:14.08 | raster | mmight provide a little extra juice |
| 01:14.11 | SpeedEvil | In short - an AA cell and a boost circuit is going to be _lots_ better |
| 01:14.14 | raster | but it wont charge the batteries if the gta02 is on |
| 01:14.20 | raster | it'll just reduce drain rate a little |
| 01:14.52 | SpeedEvil | And .05W or so if you leave it out in a sunny location all the time |
| 01:15.02 | mostly_useless | raster: trickle charge. simply to extend the battery life, and also enough to boot in the event of a dead battery for ac charging purposes. what else is the back used for? dead space. |
| 01:15.34 | raster | mostly_useless: sure... as i said., u cant POWER the gta02. u can get a little extra juice. |
| 01:15.49 | raster | and i doubt its enough to boot. |
| 01:15.52 | SpeedEvil | mostly_useless: unfortunately, in order to not have the solar cell shatter, you're going to need maybe another 3-4mm or so. |
| 01:15.56 | raster | to boot u'd need 0.5w |
| 01:16.09 | SpeedEvil | So it's going to be quite a lot deeper |
| 01:16.16 | raster | once u turn on wifi, gsm, etc. etc. and have the cpu fully up u'll be sucking much more |
| 01:17.30 | mostly_useless | well, thank you for the mathematical pessimism, but I may in fact make that a sunday project of mine. :-) |
| 01:17.49 | SpeedEvil | Fair enough - it's not a 100% bad idea |
| 01:18.04 | SpeedEvil | Oh - if you can get the better solar cells double those numbers. |
| 01:18.15 | SpeedEvil | You can get double that efficiency - but you can't get them. |
| 01:18.23 | SpeedEvil | Triple junction goodness. |
| 01:20.01 | mostly_useless | I've heard about that. I haven't began the solar cell hunt yet though. just an idea I felt like pinging off of this channel. I think it'd be a nice little addition to the phone. definitely get some extra looks of astonishment from people. |
| 01:20.59 | raster | mostly_useless: just beware that u'll still need batteries. no removing them and just running off solar |
| 01:21.14 | raster | not sure if solar will charge while gta02 is suspended |
| 01:21.28 | mostly_useless | I've also thought about finding a usb camera small enough that I could embed into the case and put the phone into host mode. that'll take a lot of extra researching |
| 01:21.30 | raster | not sure what the power measurements are these days ith suspend, and just gsm unit on |
| 01:22.07 | SpeedEvil | What I want to know is why is there no solar hat, with a gimballed 20cm*20cm solar panel that auto-tracks the sun. |
| 01:22.19 | mjr | recall that the cam would need to be able to operate with usb full speed |
| 01:22.39 | mjr | (some may require hi speed) |
| 01:23.05 | SpeedEvil | http://www.sei.ie/images_upload/Schools/Primary_Schools/Energy_in_Action/Energy_Fancy_Dress/Wood%20pellet%20Solar%20Fairy_.jpg Is close. |
| 01:23.18 | SpeedEvil | But I have doubts as to the efficiency of the solar panel |
| 01:23.23 | mostly_useless | mjr: that's a project that is a little out of my technical knowledge at the moment, but again; a fun project. |
| 01:23.52 | SpeedEvil | mjr: many cameras work just fine on 1.1 |
| 01:25.11 | mostly_useless | by bypassing the usb port, and charging the battery directly, it shouldn't matter the wattage. it's still going to prolong the drain. |
| 01:25.32 | raster | mostly_useless: if you do that... how do you intend to charge? |
| 01:26.01 | raster | or do u plan to have an unpluggable cable poking out the side of the gta02 that u unplug when charging? |
| 01:26.10 | raster | 2442 only has 1 usb conn |
| 01:26.58 | SpeedEvil | Aha! |
| 01:27.08 | mostly_useless | raster: some sort of switch which disables the cells, and reestablishes the usb connection. |
| 01:27.14 | SpeedEvil | http://www.suntrek.org/images/hinode-hat.jpg The clear solution. now _that_'ll power a freerunner. |
| 01:27.42 | mjr | is it a nuclear reactor? |
| 01:28.18 | SpeedEvil | Solar panel |
| 01:28.35 | SpeedEvil | With convenient wearability. |
| 01:29.14 | mjr | this would probably provide useful amounts of power on the run, were it still not unavailable to the public; http://www.potenco.com/products/pcg1/ |
| 01:29.17 | raster | mostly_useless: ok. |
| 01:29.43 | raster | thats going to be fun - u'll have to desolder the usb connnector and somehow put it bhack in places with something stuck in between |
| 01:30.38 | raster | mjr: much better. actually might get you to do some exercise too |
| 01:30.38 | raster | :) |
| 01:30.38 | SpeedEvil | raster: I investigated making a jig to solder to the back of the connector |
| 01:30.38 | SpeedEvil | raster: It's not impossible |
| 01:30.38 | SpeedEvil | raster: but... |
| 01:30.56 | raster | aaah. the but |
| 01:30.58 | raster | :) |
| 01:31.53 | SpeedEvil | I got a relatively easy design with flex-pcb stuff. But sourcing in small volumes is almost impossible |
| 01:32.08 | SpeedEvil | I have the actual film - but I can't shear it accurately in wierd shapes |
| 01:33.18 | raster | so basically.. cant do it unless u want to do it a lot of times |
| 01:33.21 | raster | :) |
| 01:33.39 | SpeedEvil | Pretty much. |
| 01:34.00 | raster | i like that pcg1 thing |
| 01:34.10 | SpeedEvil | Yes. I've pondered something similar. |
| 01:34.12 | raster | tho i'm not away from power enough to bother with it |
| 01:34.14 | SpeedEvil | 1*A123 cell |
| 01:34.24 | SpeedEvil | A little foot-pump type thing |
| 01:34.46 | SpeedEvil | And charge the cell at ~100W or so |
| 01:34.54 | SpeedEvil | (in pulses, average 25W) |
| 01:35.37 | SpeedEvil | (a123 = company making LiFeP04 cells - that can be charged very fast) |
| 01:35.50 | *** join/#openmoko pablomino (n=pablo@201.215.181.49) |
| 01:36.11 | raster | aah ok |
| 01:37.04 | SpeedEvil | One of the few sorts of cells you can charge fully in ~10 min |
| 01:38.26 | SpeedEvil | http://bunniestudios.com/blog/images/ntw_october_2009.jpg |
| 01:38.37 | SpeedEvil | Source _that_ sort of stuff in small volumes :) |
| 01:40.09 | raster | mmmm |
| 01:40.20 | raster | for a board... thats pretty simple |
| 01:40.24 | raster | :) |
| 01:41.13 | SpeedEvil | yeah - but the flex-pcb in the middle adds wackiness. |
| 01:41.41 | raster | sure |
| 01:43.09 | SpeedEvil | It doesn't seem very complex - I think there is probably hidden stuff on the back of the board otherwise there are too many traces |
| 01:47.18 | *** part/#openmoko pablomino (n=pablo@201.215.181.49) |
| 01:51.24 | *** join/#openmoko daMaestro (n=jon@fedora/damaestro) |
| 01:58.17 | *** join/#openmoko ajvogel (n=quassel@196-210-140-211-rrdg-esr-2.dynamic.isadsl.co.za) |
| 02:10.08 | *** join/#openmoko Amorphous (i=jan@unaffiliated/amorphous) |
| 02:21.08 | *** join/#openmoko pcfe (n=pcfe@a88-115-2-211.elisa-laajakaista.fi) |
| 02:21.11 | *** join/#openmoko Kame2 (n=manuel@port-92-196-71-48.dynamic.qsc.de) |
| 02:27.41 | *** join/#openmoko arw_ (i=foobar@190.24.24.12) |
| 02:34.52 | slaxxer | how about some solar cell paint |
| 02:36.29 | slaxxer | power film |
| 02:42.07 | slaxxer | i found it "nanotube solar cells |
| 02:42.12 | slaxxer | " |
| 02:43.14 | slaxxer | http://www.edn.com/blog/1470000147/post/890049689.html |
| 02:43.35 | slaxxer | Doc can build it for us |
| 02:50.06 | *** join/#openmoko arw_ (i=foobar@190.26.233.113) |
| 02:53.24 | *** join/#openmoko alephnull (n=alok@122.172.10.234) |
| 02:56.58 | *** join/#openmoko Sargun (n=Sargun@atarack/Staff/Sargun) |
| 03:12.22 | *** join/#openmoko idarwin (n=ian@207.81.133.5) |
| 03:19.00 | *** join/#openmoko ezekiel (n=ezekiel@67.100.144.50) |
| 03:28.00 | *** join/#openmoko alephnull_ (n=alok@122.172.21.197) |
| 03:36.13 | *** join/#openmoko batti112 (n=batti@dslb-092-073-186-054.pools.arcor-ip.net) |
| 03:41.24 | *** join/#openmoko playya__ (n=playya@unaffiliated/playya) |
| 04:12.03 | *** join/#openmoko dwb (n=david@a177027.upc-a.chello.nl) |
| 04:28.25 | *** join/#openmoko droid001 (n=g1@79.220.241.216) |
| 04:31.05 | *** join/#openmoko yanu (n=yanu@84.197.248.8) |
| 04:34.17 | *** join/#openmoko DocScrutinizer (n=jr@85.116.194.200) |
| 04:43.51 | *** join/#openmoko vininim (n=vininim@pdpc/supporter/student/vininim) |
| 04:49.34 | *** join/#openmoko joerg_42 (n=jr-N810@200.194.116.85.dsl.manitu.net) |
| 04:52.32 | BillK | anyone know where I find some pics of the shr niebie theme? |
| 05:10.58 | *** join/#openmoko soman (n=somnath@115.119.41.110) |
| 05:19.29 | *** join/#openmoko vanous123 (n=vanous@85.93.174.26) |
| 05:22.48 | *** join/#openmoko Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 05:25.45 | *** join/#openmoko h4v (n=h4v@91.121.90.167) |
| 05:33.42 | *** join/#openmoko raynet (n=raynet@ns25663.ovh.net) |
| 05:49.49 | *** join/#openmoko nio_ (n=nio@d594e5f2.dsl.concepts.nl) |
| 05:51.41 | *** join/#openmoko lpotter (n=quiggly@58.173.176.153) |
| 05:59.10 | raster | scrutinizes DocScrutinizer-8 |
| 06:03.48 | slaxxer | http://scap.linuxtogo.org |
| 06:04.19 | slaxxer | google man |
| 06:05.46 | raster | ? |
| 06:05.53 | raster | oooh |
| 06:05.59 | raster | respondig to BillK |
| 06:13.51 | *** join/#openmoko zeroedout (n=zeroedou@vhs.hackspace.ca) |
| 06:14.15 | zeroedout | does anyone know where instructions are to open the freerunner up? |
| 06:14.32 | zeroedout | i've searched the wiki and nabble couldn't find anything :( |
| 06:21.46 | *** join/#openmoko geaaru (n=geaaru@79.40.34.225) |
| 06:22.04 | DocScrutinizer-8 | zeroedout: wiki; disassembling-Neo1973 |
| 06:25.38 | DocScrutinizer-8 | raster: moin |
| 06:26.28 | raster | DocScrutinizer-8: boo |
| 06:27.48 | *** join/#openmoko Heinervdm (n=thomas@pD9E16365.dip.t-dialin.net) |
| 06:31.02 | *** join/#openmoko beers (n=beer@fw.agrsci.dk) |
| 06:45.11 | *** join/#openmoko andi (n=andi@eeepc.andi.whyi.org) |
| 06:57.58 | *** join/#openmoko thannoy (n=thannoy@62.160.20.144) |
| 07:11.10 | *** join/#openmoko wd_ (n=wd@in.soviet.russia.brains.suxx.us) |
| 07:15.25 | *** join/#openmoko manitu (n=werner@p578b0cfb.dip0.t-ipconnect.de) |
| 07:17.56 | *** join/#openmoko Kame2 (n=manuel@port-92-196-103-235.dynamic.qsc.de) |
| 07:18.12 | *** join/#openmoko beer (n=durk@ipass.solcon.nl) |
| 07:18.19 | beer | morning |
| 07:18.45 | tomcatek | morning |
| 07:20.13 | *** join/#openmoko CVirus (n=Satan@41.130.235.117) |
| 07:22.59 | *** join/#openmoko moo--- (n=quassel@herd41.twinapex.fi) |
| 07:24.00 | *** join/#openmoko polaru (n=polaru@93.113.192.70) |
| 07:28.06 | *** join/#openmoko Arigead (n=Rupert@83-71-15-35-dynamic.b-ras1.dbn.dublin.eircom.net) |
| 07:32.05 | Psi | are there any mapping apps that work under shr that use openstreetmap data? |
| 07:35.00 | Heinervdm | tangogps? |
| 07:35.13 | Psi | oh, didnt know that used openstreatmap |
| 07:43.39 | *** join/#openmoko dns53 (n=dns@203.171.196.52) |
| 07:45.42 | *** join/#openmoko der-lehmann (n=stefan@188-192-133-169-dynip.superkabel.de) |
| 07:48.04 | Psi | right, time to get gta01 running on this new sd card, 512mb isnt going to be enough to store the map data i want |
| 07:51.39 | *** join/#openmoko pespin (n=pespin@127.Red-88-7-193.staticIP.rima-tde.net) |
| 07:54.11 | *** join/#openmoko nullix (n=philippe@92.103.174.253) |
| 07:55.33 | dns53 | depends on what country you are from |
| 07:57.22 | Psi | was showing whole of Auckland (NZ's biggest city) and it was saying it would need 400MB to download everything down to lowest zoom level |
| 07:58.27 | *** join/#openmoko neomilium (n=romuald@LMontsouris-156-24-13-50.w80-14.abo.wanadoo.fr) |
| 08:06.16 | Defiant- | Psi: You probably don't need the lowest levels |
| 08:06.33 | Psi | what sort of extra data do they provide? |
| 08:07.26 | Defiant- | some streets here are not visible on the higher levels thats all I found. |
| 08:07.47 | Defiant- | just check for yourself how many levels you need |
| 08:07.54 | Psi | good idea |
| 08:08.10 | Psi | do you know how to search for a streetname in tangogps |
| 08:08.14 | Psi | i couldnt find the option |
| 08:08.32 | Defiant- | don't think tangogps can do that. That would be a job for navit |
| 08:09.49 | Psi | seems like a pretty fundamental feature of any mapping app |
| 08:10.30 | *** join/#openmoko thrashold (n=europan@3mhz.net) |
| 08:12.12 | Psi | does navit use openstreetmap data? |
| 08:13.06 | Defiant- | yes |
| 08:13.28 | Psi | will have a play with that too then :) |
| 08:20.39 | *** join/#openmoko ZaPPaS (n=moritz@buero2.pi5.physik.uni-stuttgart.de) |
| 08:20.42 | *** join/#openmoko zZaPPaSs (n=moritz@buero2.pi5.physik.uni-stuttgart.de) |
| 08:29.08 | *** join/#openmoko dns53 (n=dns@ppp246-215.static.internode.on.net) |
| 08:36.22 | *** join/#openmoko hanez (n=hanez@hanez.org) |
| 08:40.15 | *** join/#openmoko Free_maN (n=Free_maN@217.174.199.201) |
| 08:40.17 | Psi | can uboot read a uimage off a 2gb ext3 partition? |
| 08:40.43 | Psi | uboot-1.3.2-moko12 |
| 08:44.05 | *** join/#openmoko spydon (n=spydon@nl119-198-163.student.uu.se) |
| 08:53.21 | *** join/#openmoko valos (n=valos@coquelicot-adsl.easter-eggs.com) |
| 08:53.21 | *** join/#openmoko jlmoko (n=jluis@66.Red-83-37-82.dynamicIP.rima-tde.net) |
| 08:58.34 | *** join/#openmoko tig| (n=gclarke@aurix.plus.com) |
| 08:58.44 | *** join/#openmoko N-Mi (n=nicolas@calvix/staff/N-Mi) |
| 09:07.48 | *** join/#openmoko ericthefish (n=ericthef@217.113.163.70) |
| 09:08.50 | *** join/#openmoko BillK_ (n=BillK@203-206-64-70.dyn.iinet.net.au) |
| 09:09.58 | *** join/#openmoko soman (n=somnath@118.102.130.5) |
| 09:15.07 | *** join/#openmoko molgrum (n=molgrum@h-188-194.A189.priv.bahnhof.se) |
| 09:18.35 | DocScrutinizer-8 | Psi: afaik depends on inode size of ext2/3. uBoot can handle 128 only. mkfs.ext3 uses 256 by default. All this from memory, so no guarantees ;-) |
| 09:18.58 | Psi | yeah, gave up and using a seperate parition instead |
| 09:20.46 | DocScrutinizer-8 | (alsao afaik) that's default uboot env config anyway, for bootmenu entry "boot from uSD (ext2)" |
| 09:21.46 | DocScrutinizer-8 | same here: vfat for uimage.bin, ext3 for rootfs |
| 09:22.06 | Psi | yeah, i bricked my gta01 and had to restore all that, now it only has a few options i added back in |
| 09:22.28 | *** join/#openmoko AlexC (n=alexc@unaffiliated/alexc) |
| 09:23.49 | DocScrutinizer-8 | my vfat partition is 15GB atm, for using the card in a usb-stick, to transfer data to/from windoof ;-) |
| 09:24.46 | DocScrutinizer-8 | (never actually ued that feature yet :-P ) |
| 09:26.02 | Psi | using a 16GB card? |
| 09:32.18 | tig| | has there not been a new build of SHR for a long time now or am I looking in the wrong place? Last one I saw was Sep 6th? |
| 09:32.40 | Psi | afaik your correct |
| 09:32.46 | Psi | hasnt been a new build in a while |
| 09:33.30 | Psi | *you're |
| 09:33.58 | tig| | odd, have they had buildhost problems and been working on code instead ? |
| 09:34.35 | Psi | not sure |
| 09:35.29 | *** join/#openmoko e-Flex (n=e@h-30-37.A176.priv.bahnhof.se) |
| 09:36.53 | DocScrutinizer | there's major changes pending |
| 09:37.24 | DocScrutinizer | so seems they can't merge back to shr-u |
| 09:38.17 | *** join/#openmoko madel (n=chatzill@196.204.160.40) |
| 09:38.17 | DocScrutinizer | currently development happens in http://build.shr-project.org/tests/mrmoku/unstable/images/om-gta02 |
| 09:38.36 | DocScrutinizer | but that seems to be hyper-unstable |
| 09:38.41 | DocScrutinizer | yet |
| 09:39.07 | *** join/#openmoko geaaru (n=geaaru@host132-219-dynamic.44-79-r.retail.telecomitalia.it) |
| 09:41.15 | *** join/#openmoko Tanuva (n=tanuva@p5B10F64F.dip.t-dialin.net) |
| 09:41.30 | tig| | thanks DocScrutinizer |
| 09:42.18 | *** join/#openmoko jlmoko (n=jluis@80.31.46.123) |
| 09:45.24 | *** join/#openmoko freelock (n=john@216.231.62.127) |
| 09:46.56 | *** join/#openmoko kkb1101 (n=kkb110@host133-16.student.udel.edu) |
| 09:48.03 | Psi | well ive told tangogps to grab the map data i want and it appears to be atleast, downloading something :) |
| 09:49.50 | dns53 | if you need to get maps for tangogps download it on your pc, it's going to be faster |
| 09:50.24 | dns53 | there is also the other 2 renderings of openstreetmap to get |
| 09:51.24 | Psi | sounds complex |
| 09:51.33 | Kamping_Kaiser | dns53: hey mate |
| 09:51.42 | dns53 | hey |
| 09:52.25 | dns53 | it's just a matter of entering a different url for openstreetmap, i have some scripts to download it again for the other 2 renders if you want |
| 09:52.56 | SpeedEvil | However - download too uch, and you can get banned |
| 09:53.07 | SpeedEvil | Try not to be silly. |
| 09:54.10 | Psi | where does tangogps put its data? |
| 09:54.23 | Psi | all i can find is /Maps/OSM and thats pngs, not map data |
| 09:54.35 | Kamping_Kaiser | tango uses tiles |
| 09:54.50 | dns53 | if you want vector use navit |
| 09:55.06 | Psi | thanks |
| 09:56.14 | dns53 | for maps for navit use cloudmade.com |
| 09:56.59 | Psi | ok |
| 10:05.31 | lindi- | Psi: downloading large number of map tiles is quite discouraged |
| 10:06.39 | Psi | not like there is much choice on a non 3G phone |
| 10:07.38 | lindi- | Psi: you can generate the tiles on your PC |
| 10:07.52 | Psi | interesting |
| 10:08.43 | lindi- | Psi: using the openstreetmap.org bandwidth that is paid by donations is not very nice if you attempt to download large areas |
| 10:09.06 | Psi | what do you define as large? |
| 10:09.31 | lindi- | Psi: well 20 megabytes? |
| 10:09.45 | Kamping_Kaiser | so 2 layers :/ |
| 10:09.53 | lindi- | each tile is also a very small file so it'll generate a lot of load |
| 10:10.12 | Psi | im only getting 3KB/s |
| 10:10.17 | lindi- | which is again handled by cpu's paid by donations :) |
| 10:10.23 | lindi- | s/cpu's/cpus/ |
| 10:10.53 | Kamping_Kaiser | s/paid/paid for/;) |
| 10:11.59 | *** join/#openmoko piti_ (n=pablo@pdpc/supporter/active/piti) |
| 10:12.58 | Psi | stopped the download, will have a look at navit |
| 10:13.23 | lindi- | anyways, imho those tile*.openstreetmap.org servers should be reserved for interactive use and others should generate their maps locally |
| 10:14.07 | lindi- | it only took me about four hours to setup last time i needed to generate my own map :) |
| 10:16.35 | *** join/#openmoko piti_ (n=pablo@pdpc/supporter/active/piti) |
| 10:16.39 | *** join/#openmoko max_posedon (n=max_pose@87.252.243.177) |
| 10:21.58 | dns53 | lindi- what did you need to do? i've got the planet downloaded what software do i need? |
| 10:24.20 | dns53 | Psi i use the daily navit build, add this to your opkg sources: src navit http://download.navit-project.org/navit/openmoko/svn |
| 10:25.41 | Psi | yep, but got a gtk+-fastscaling dependency on that |
| 10:26.29 | lindi- | dns53: i only downloaded finland.osm and used osmosis to select the area that I really needed |
| 10:27.05 | lindi- | dns53: so only about 60M of downloading plus apt-get install osmosis mapnik osm2pgsql ... |
| 10:30.04 | *** join/#openmoko alephnull (n=alok@122.167.32.194) |
| 10:31.20 | lindi- | dns53: oh and don't forget apt-get install osm2navit for creating navit files from those |
| 10:33.24 | dns53 | cool |
| 10:34.37 | *** join/#openmoko thrashold (n=europan@3mhz.net) |
| 10:42.16 | *** join/#openmoko mostly_useless (n=michael@75.111.36.101) |
| 10:44.39 | *** join/#openmoko Zorkman (n=Zork@78.22.123.127) |
| 10:47.11 | *** join/#openmoko ajvogel (n=quassel@196-210-140-211-rrdg-esr-2.dynamic.isadsl.co.za) |
| 10:48.22 | *** join/#openmoko GovCon (n=GC@unaffiliated/govcon) |
| 10:51.17 | *** join/#openmoko RigacciOrg1 (n=niccolo@host26-16-static.57-88-b.business.telecomitalia.it) |
| 10:55.10 | *** join/#openmoko thrashold (n=europan@3mhz.net) |
| 10:57.49 | *** join/#openmoko cz_jc (n=jc@gate.sps-pi.cz) |
| 10:58.24 | *** part/#openmoko RigacciOrg1 (n=niccolo@host26-16-static.57-88-b.business.telecomitalia.it) |
| 11:26.36 | *** join/#openmoko RigacciOrg1 (n=niccolo@host26-16-static.57-88-b.business.telecomitalia.it) |
| 11:26.46 | *** part/#openmoko RigacciOrg1 (n=niccolo@host26-16-static.57-88-b.business.telecomitalia.it) |
| 11:28.29 | *** join/#openmoko RigacciOrg1 (n=niccolo@host26-16-static.57-88-b.business.telecomitalia.it) |
| 11:28.42 | *** part/#openmoko RigacciOrg1 (n=niccolo@host26-16-static.57-88-b.business.telecomitalia.it) |
| 11:31.01 | *** join/#openmoko otypoks (n=e55c2403@xkh1g1.infr.xiaoka.com) |
| 11:37.15 | *** join/#openmoko Sharwin_F- (n=Sharwin_@123.pool85-50-66.dynamic.orange.es) |
| 11:58.51 | *** join/#openmoko RigacciOrg (n=niccolo@host26-16-static.57-88-b.business.telecomitalia.it) |
| 12:08.38 | *** join/#openmoko max_posedon (n=max_pose@87.252.243.177) |
| 12:13.48 | *** join/#openmoko Vk (n=vk@leased-line-gomel-91-149-131-154.telecom.by) |
| 12:16.40 | *** part/#openmoko Vk (n=vk@leased-line-gomel-91-149-131-154.telecom.by) |
| 12:16.49 | *** join/#openmoko rhaeder (n=rhaeder@dslb-088-076-098-067.pools.arcor-ip.net) |
| 12:27.42 | *** join/#openmoko Ryback_ (n=ulisses@enlightenment/developer/ryback) |
| 12:31.45 | *** join/#openmoko Gyb (n=Gyb@g224238176.adsl.alicedsl.de) |
| 12:34.54 | *** part/#openmoko der-lehmann (n=stefan@188-192-133-169-dynip.superkabel.de) |
| 12:45.39 | *** join/#openmoko Majkhii (n=Majkhii@62.84.143.54) |
| 13:06.29 | *** join/#openmoko ericthefish (n=ericthef@217.113.163.70) |
| 13:08.17 | *** part/#openmoko otypoks (n=e55c2403@xkh1g1.infr.xiaoka.com) |
| 13:14.59 | *** join/#openmoko spydon (n=spydon@nl119-203-236.student.uu.se) |
| 13:42.53 | *** join/#openmoko ruoso (n=ruoso@201009047142.user.veloxzone.com.br) |
| 13:43.07 | *** join/#openmoko alfatangoxt (n=michele@host15-201-dynamic.12-79-r.retail.telecomitalia.it) |
| 13:55.38 | *** join/#openmoko dos1 (n=dos@unaffiliated/dos1) |
| 13:58.14 | *** join/#openmoko alessandro (n=alessand@host174-241-dynamic.42-79-r.retail.telecomitalia.it) |
| 13:58.27 | alessandro | hi |
| 13:58.47 | *** join/#openmoko gunbritt (n=arfmarf@unaffiliated/gunbritt) |
| 13:59.07 | alessandro | list |
| 14:00.31 | *** join/#openmoko AntonTakk (n=AntonTak@poolofdespair.net) |
| 14:02.19 | *** join/#openmoko UnknownArtists (n=unknown@84.19.199.203) |
| 14:07.36 | *** join/#openmoko spydon (n=spydon@nl103-146-152.student.uu.se) |
| 14:07.47 | slaxxer | maybe shr will soon have an updated rootfs |
| 14:07.53 | slaxxer | {_ |
| 14:09.43 | *** join/#openmoko alfatangoxt (n=michele@host8-177-dynamic.20-79-r.retail.telecomitalia.it) |
| 14:11.56 | *** join/#openmoko aloril (n=aloril@dsl-tkubrasgw3-fe7ef900-153.dhcp.inet.fi) |
| 14:12.00 | *** join/#openmoko arw_ (i=foobar@190.26.233.113) |
| 14:18.49 | *** join/#openmoko Kame2 (n=manuel@port-92-196-103-235.dynamic.qsc.de) |
| 14:18.56 | *** join/#openmoko ericthefish_ (n=ericthef@217.113.163.70) |
| 14:24.46 | *** join/#openmoko fgau (n=fgau@62.8.133.125) |
| 14:30.16 | *** join/#openmoko mnt_real (n=sinan@bas12-montrealak-1167978043.dsl.bell.ca) |
| 14:33.56 | *** join/#openmoko aloril (n=aloril@dsl-tkubrasgw3-fe7ef900-153.dhcp.inet.fi) |
| 14:36.14 | *** join/#openmoko beer_ (n=beer@0x4dd40dcb.adsl.cybercity.dk) |
| 14:39.16 | *** join/#openmoko Sharwin_F (n=Sharwin_@61.pool85-50-88.dynamic.orange.es) |
| 14:51.21 | *** join/#openmoko Sharwin_F- (n=Sharwin_@85.50.83.150) |
| 14:56.02 | *** join/#openmoko gargoyle-grin (n=randerso@gentoo/contributor/gargoyle-grin) |
| 14:58.56 | *** join/#openmoko Sharwin_F-- (n=Sharwin_@200.pool85-50-75.dynamic.orange.es) |
| 15:00.21 | *** join/#openmoko alfatangoxt (n=michele@host125-195-dynamic.25-79-r.retail.telecomitalia.it) |
| 15:01.10 | *** join/#openmoko daMaestro (n=jon@fedora/damaestro) |
| 15:05.00 | CIA-44 | openmoko: 03werner * r5699 10/trunk/eda/fped/gui_inst.c: |
| 15:05.00 | CIA-44 | openmoko: - gui_inst.c (gui_draw_rpad): when drawing an outline instead of filling, use |
| 15:05.00 | CIA-44 | openmoko: two lines instead of a rectangle |
| 15:06.25 | *** join/#openmoko Sharwin_F (n=Sharwin_@244.pool85-50-82.dynamic.orange.es) |
| 15:12.52 | *** join/#openmoko uzi18 (n=uzi@gfb34.internetdsl.tpnet.pl) |
| 15:16.29 | *** join/#openmoko Sharwin_F- (n=Sharwin_@90.163.58.44) |
| 15:22.27 | *** join/#openmoko raron (n=kvirc@dsl51B799AB.pool.t-online.hu) |
| 15:28.50 | *** join/#openmoko HellDragon (i=jd@modemcable178.248-201-24.mc.videotron.ca) |
| 15:39.26 | *** part/#openmoko tig| (n=gclarke@aurix.plus.com) |
| 15:41.13 | *** join/#openmoko naeg (n=naeg@194.208.239.170) |
| 15:44.38 | *** join/#openmoko Zorkman2 (n=Zork@78-22-123-127.access.telenet.be) |
| 15:45.08 | *** join/#openmoko RedFlash (n=RedFlash@host26-106-dynamic.25-79-r.retail.telecomitalia.it) |
| 15:49.11 | *** join/#openmoko marh (n=marius@p54BE4AA6.dip.t-dialin.net) |
| 15:49.41 | *** join/#openmoko Sharwin_F- (n=Sharwin_@90.163.56.50) |
| 15:51.19 | *** join/#openmoko molgrum_ (n=molgrum@h-188-194.A189.priv.bahnhof.se) |
| 15:54.31 | *** join/#openmoko PBeck (n=PBeck@HSI-KBW-085-216-073-116.hsi.kabelbw.de) |
| 15:54.44 | PBeck | hi |
| 15:58.46 | d1b | hi |
| 16:01.30 | *** join/#openmoko Sharwin_F-- (n=Sharwin_@90.163.57.124) |
| 16:01.38 | *** join/#openmoko Kame2 (n=manuel@port-92-196-103-235.dynamic.qsc.de) |
| 16:03.29 | *** join/#openmoko juan_arandaalvar (n=jaranda@201.171.227.91.dsl.dyn.telnor.net) |
| 16:03.49 | *** join/#openmoko alephnull (n=alok@122.172.12.159) |
| 16:06.02 | *** join/#openmoko CVirus (n=Satan@41.130.235.117) |
| 16:09.52 | *** join/#openmoko MattCampbell (n=matt@adsl-76-209-31-229.dsl.wchtks.sbcglobal.net) |
| 16:10.09 | MattCampbell | Can the FreeRunner run Android 1.6 (Donut) yet? |
| 16:11.32 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * rc9c0a9847a0d 10/libfsotransport/fsotransport/basetransport.vala: libfsotransport: set watches to 0 if removing them |
| 16:11.33 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * re4e651b4239c 10/libfsotransport/fsotransport/basetransport.vala: libfsotransport: basetransport: move some methods into the private API |
| 16:11.35 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * rd6c91156e0b2 10/libfsotransport/fsotransport/ (basetransport.vala transport.vala): libfsoframework: add writeAndRead to transport interface. implementation pending. |
| 16:13.08 | *** join/#openmoko \3TATUK (n=chatzill@adsl-99-140-232-74.dsl.chcgil.sbcglobal.net) |
| 16:19.22 | \3TATUK | Hello.. |
| 16:19.26 | *** join/#openmoko manitu (n=werner@p578b0cfb.dip0.t-ipconnect.de) |
| 16:19.56 | \3TATUK | Does the Freerunner's GPS work 'anywhere' (not only within 802.11 range)? |
| 16:20.34 | \3TATUK | The main two reasons I'd get a freerunner is if it works with my t-mobile SIM card and has 'universal' GPS (without additional cost) ;] |
| 16:20.56 | \3TATUK | any insight appriciated |
| 16:21.44 | SpeedEvil | yes |
| 16:21.58 | *** join/#openmoko soltys (i=soltys@soltys.soad.pl) |
| 16:21.58 | SpeedEvil | you don't need a network |
| 16:22.07 | *** join/#openmoko mani|work (n=werner@p578b0cfb.dip0.t-ipconnect.de) |
| 16:22.33 | \3TATUK | terrific |
| 16:22.45 | mwester | (of course, you need to download the map tiles, or all you'll get is the lat/long position...) |
| 16:23.00 | \3TATUK | i mean 3G type stuff is a plus.. like a browser for wikipedia maybe IRC, etc |
| 16:23.11 | \3TATUK | didn't spend too much time looking at freerunner feature lists |
| 16:23.13 | \3TATUK | hah |
| 16:24.28 | \3TATUK | but you'd say it's a reliable phone? (for anyone with person experience) |
| 16:24.37 | *** join/#openmoko keinan (n=keinan@89.138.12.88) |
| 16:24.39 | \3TATUK | personal |
| 16:24.50 | SpeedEvil | I have in the past used my neo1973 as my only phone. |
| 16:24.58 | SpeedEvil | There are currently people here that are using it as their current phone. |
| 16:25.33 | \3TATUK | GPS is the major lack in my current device .. i need driving directions occationally |
| 16:25.43 | SpeedEvil | That's a slight problem. |
| 16:25.54 | SpeedEvil | There is no driving directions package that works well. |
| 16:25.58 | \3TATUK | those gps car mounts are cool but i dont want a separate electronic |
| 16:26.01 | SpeedEvil | tangogps is a moving map thingy |
| 16:26.07 | SpeedEvil | Where ar eyou? |
| 16:26.19 | \3TATUK | near chicago |
| 16:26.39 | \3TATUK | i mean even something where i can get directions without realtime updating is better than nothing |
| 16:27.52 | \3TATUK | what, you want the geographic of my specific neighbourhood? :p |
| 16:28.06 | SpeedEvil | The USA has moderately OK coverage for moving maps. |
| 16:28.06 | \3TATUK | let's just say .. it's crowded heh |
| 16:28.21 | SpeedEvil | The routing of some isn't very good. |
| 16:28.47 | SpeedEvil | The openstreetmap data is based off the TIGER dataset from the US government. Whcih can have odd geometrical distortions for neighbourhoods. |
| 16:28.49 | \3TATUK | no access to say google maps? or would that depend on my carrier package |
| 16:29.15 | \3TATUK | i mean getting maps.google.com right on the phone |
| 16:29.34 | SpeedEvil | yes, you can do that |
| 16:29.56 | SpeedEvil | I assume - I haven't actually used a browser on the device. |
| 16:30.02 | *** join/#openmoko samgee (n=samgee@fsf/member/samgee) |
| 16:30.07 | SpeedEvil | I'm still using an image >1 year old |
| 16:30.20 | \3TATUK | okay but it's not extremely bare bones? |
| 16:30.31 | \3TATUK | i mean the out-of-box UI is at least decent, i'd assume? |
| 16:30.44 | \3TATUK | touch screen is fun ;D |
| 16:30.46 | SpeedEvil | I don't know what the current state is. |
| 16:30.57 | SpeedEvil | I'd say ask again in a couple of hours when more people might be around |
| 16:31.11 | \3TATUK | eh thanks for input though |
| 16:33.57 | *** join/#openmoko pH5 (n=ph5@e178212164.adsl.alicedsl.de) |
| 16:35.16 | *** join/#openmoko feitingen (n=feitinge@79.97.115.208) |
| 16:37.55 | *** join/#openmoko tvmanukrishnan (n=tvm@117.254.103.96) |
| 16:38.10 | *** join/#openmoko zedstar (n=john@fsf/member/zedstar) |
| 16:39.12 | tvmanukrishnan | hi.. I can't flash the neo1973. It always gives error |
| 16:39.51 | tvmanukrishnan | I tried installing a new package and the device is now out of space. the GUI is not loading. what to do? |
| 16:42.39 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * rcff3aab330cd 10/libfsotransport/fsotransport/basetransport.vala: libfsotransport: implement synchronous, blocking writeAndRead() |
| 16:43.49 | \3TATUK | tvmanukrishnan: research the specific error |
| 16:44.34 | tvmanukrishnan | \3TATUK: Starting download: [######Error during download get_status |
| 16:44.54 | tvmanukrishnan | \3TATUK: and then dfu-util -l shows many devices |
| 16:44.58 | *** join/#openmoko eolson (n=eolson@140.221.11.220) |
| 16:45.08 | tvmanukrishnan | \3TATUK: like: Found DFU: [0x1457:0x5119] devnum=5, cfg=0, intf=0, alt=0, name="UNDEFINED" |
| 16:45.16 | *** join/#openmoko pleemans (n=toi@d54C2A96D.access.telenet.be) |
| 16:45.19 | tvmanukrishnan | Found DFU: [0x1457:0x5119] devnum=5, cfg=0, intf=0, alt=1, name="UNDEFINED" |
| 16:45.19 | tvmanukrishnan | Found DFU: [0x1457:0x5119] devnum=5, cfg=0, intf=0, alt=2, name="UNDEFINED" |
| 16:45.19 | tvmanukrishnan | Found DFU: [0x1457:0x5119] devnum=5, cfg=0, intf=0, alt=3, name="UNDEFINED" |
| 16:45.19 | tvmanukrishnan | Found DFU: [0x1457:0x5119] devnum=5, cfg=0, intf=0, alt=4, name="UNDEFINED" |
| 16:45.19 | tvmanukrishnan | Found DFU: [0x1457:0x5119] devnum=5, cfg=0, intf=0, alt=5, name="UNDEFINED" |
| 16:45.24 | \3TATUK | i don't have an openmoko phone, good luck |
| 16:46.41 | *** join/#openmoko alephnull (n=alok@122.172.21.131) |
| 16:48.38 | *** join/#openmoko Sharwin_F- (n=Sharwin_@90.163.49.35) |
| 16:51.48 | *** join/#openmoko Blastur (n=kebab@86-232-96-87.cust.blixtvik.se) |
| 16:52.14 | *** part/#openmoko nullix (n=philippe@92.103.174.253) |
| 16:52.45 | *** join/#openmoko pbaxter (n=pbaxter@host78-152-dynamic.51-79-r.retail.telecomitalia.it) |
| 16:55.23 | *** join/#openmoko JRolland (n=JRolland@wsp05975388wss.cr.net.cable.rogers.com) |
| 16:56.43 | JRolland | Does anyone know the AT commands to get network connection type? |
| 16:57.17 | JRolland | Or how I can poll the GSM modem for signal strength data when it is in a connected state without disconnecting with "+++" ? |
| 16:57.20 | *** join/#openmoko jonkristian (n=jonkrist@34.80-203-231.nextgentel.com) |
| 16:57.27 | jonkristian | TAsn: ping |
| 17:00.43 | *** join/#openmoko Sharwin_F-- (n=Sharwin_@114.pool85-50-94.dynamic.orange.es) |
| 17:01.02 | *** join/#openmoko Batchy (n=batchy@AVelizy-155-1-74-91.w90-2.abo.wanadoo.fr) |
| 17:01.18 | *** join/#openmoko jokerfox (n=jokerfox@178.79-160-145.customer.lyse.net) |
| 17:02.44 | jokerfox | Hi, I Try to download the qt extended improved from this site but it just hangs. seems that link is down, anyone got another url that works ? http://dashi-x02.karadog.net/~lihouyu/qtextended/snapbuild/ |
| 17:03.52 | vanous123 | jokerfox: don't want to go for latest qtmoko? |
| 17:04.16 | vanous123 | jokerfox: qtmoko.org |
| 17:04.38 | jokerfox | as long as its just dfu dump into tlf. then I could do that :) |
| 17:05.54 | jokerfox | vanous123: it is built upon qt-extended like improved? |
| 17:06.29 | *** join/#openmoko ozzloy_ (n=ozzloy@ozzloy.lifeafterking.org) |
| 17:06.34 | vanous123 | jokerfox: http://sourceforge.net/projects/qtmoko/files/ |
| 17:06.43 | vanous123 | jokerfox: yes |
| 17:06.58 | jokerfox | thanks, ill look into it! :) |
| 17:07.00 | vanous123 | jokerfox: just check the website |
| 17:14.22 | JRolland | no love for Polling a modem in a connected state ? Should I be using a debug tty ? |
| 17:15.22 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * ra4e75c3cfabb 10/fsogsmd/src/lib/ (5 files): fsogsmd: move AtResponse codes into Constants namespace |
| 17:16.22 | *** join/#openmoko beer_ (n=beer@0x4dd40dcb.adsl.cybercity.dk) |
| 17:19.38 | *** join/#openmoko jlmoko (n=jluis@80.31.46.196) |
| 17:22.16 | *** join/#openmoko moo--- (n=quassel@oul131-gw12.netplaza.fi) |
| 17:23.36 | *** join/#openmoko Majkhii (n=Majkhii@213.155.250.139) |
| 17:24.32 | *** join/#openmoko Sharwin_F- (n=Sharwin_@13.pool85-50-86.dynamic.orange.es) |
| 17:25.21 | *** join/#openmoko lpotter (n=quiggly@58.173.176.153) |
| 17:30.29 | *** join/#openmoko nikolajsheller3 (n=nikolaj@0608ds1-amb.0.fullrate.dk) |
| 17:36.33 | *** join/#openmoko Sharwin_F-- (n=Sharwin_@90.163.50.249) |
| 17:38.07 | *** part/#openmoko samgee (n=samgee@fsf/member/samgee) |
| 17:40.38 | *** join/#openmoko Zorkman (n=Zork@78-22-123-127.access.telenet.be) |
| 17:42.23 | *** join/#openmoko Guest5840 (n=Ophelia@p5B2767FC.dip.t-dialin.net) |
| 17:49.26 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * r79d24ae9aed2 10/fsogsmd/src/lib/ (consts.vala mediator.vala): fsogsmd: translate (some) +CME ERRORs into proper dbus errors |
| 17:49.35 | *** join/#openmoko kkb110 (n=kkb110@wifi-roaming-0-91.nss.udel.edu) |
| 17:53.26 | *** join/#openmoko init[0] (i=buffer@shellium/member/buffer) |
| 17:53.35 | *** part/#openmoko init[0] (i=buffer@shellium/member/buffer) |
| 17:54.51 | *** join/#openmoko Zorkman2 (n=Zork@78.22.123.127) |
| 18:04.35 | *** join/#openmoko Zorkman (n=Zork@78-22-123-127.access.telenet.be) |
| 18:05.48 | *** join/#openmoko alfatangoxt (n=michele@host59-202-dynamic.12-79-r.retail.telecomitalia.it) |
| 18:06.54 | *** join/#openmoko morphis (n=morphis@p54899EF6.dip0.t-ipconnect.de) |
| 18:10.38 | CIA-44 | freesmartphone.org: 03mickey 07specs * ra41aec13e589 10/ (3 files in 3 dirs): org.freesmartphone.GSM: add new dbus error 'org.freesmartphone.GSM.DeviceRequiresAuthorization' |
| 18:16.41 | *** join/#openmoko Sharwin_F-- (n=Sharwin_@63.pool85-50-90.dynamic.orange.es) |
| 18:27.19 | CIA-44 | freesmartphone.org: 03mickey 07specs * r757610166bf0 10/ (3 files in 3 dirs): change error name |
| 18:32.03 | CIA-44 | freesmartphone.org: 03mickey 07libfso-glib * re519bc9eac44 10/src/freesmartphone-gsm.vala: regen |
| 18:33.39 | *** join/#openmoko onen|openBmap (n=quassel@vbo91-1-89-87-201-85.dsl.club-internet.fr) |
| 18:35.56 | *** join/#openmoko Sharwin_F-- (n=Sharwin_@85.50.66.171) |
| 18:40.10 | *** join/#openmoko panicking (n=Michael@77.224.194.88) |
| 18:41.32 | *** join/#openmoko ericthefish (n=ivan@94-192-230-157.zone6.bethere.co.uk) |
| 18:46.28 | *** join/#openmoko ericthefish_ (n=ivan@94-192-230-157.zone6.bethere.co.uk) |
| 18:51.35 | *** join/#openmoko bumbl (n=bumbl@91-114-187-100.adsl.highway.telekom.at) |
| 18:51.54 | *** join/#openmoko RedFlash (n=RedFlash@host26-106-dynamic.25-79-r.retail.telecomitalia.it) |
| 19:04.57 | *** join/#openmoko Sharwin_F- (n=Sharwin_@90.163.49.169) |
| 19:05.02 | *** join/#openmoko Heinervdm (n=thomas@pD9E16365.dip.t-dialin.net) |
| 19:08.46 | *** join/#openmoko peter-b (n=peter_b@mnch-5d8619be.pool.mediaWays.net) |
| 19:09.20 | *** join/#openmoko Sharwin_F (n=Sharwin_@90.163.61.56) |
| 19:10.00 | *** join/#openmoko der-lehmann (n=stefan@188-192-133-169-dynip.superkabel.de) |
| 19:12.55 | *** join/#openmoko Sharwin_F (n=Sharwin_@90.163.61.103) |
| 19:15.09 | *** join/#openmoko rddDavid51 (n=roudoudo@78.234.93.192) |
| 19:15.46 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * r560adc497c9b 10/fsogsmd/src/lib/consts.vala: fsogsmd: add full set of known CME and CMS error constants |
| 19:16.52 | *** join/#openmoko max_posedon_ (n=max_pose@80.249.91.221) |
| 19:24.36 | slaxxer | <PROTECTED> |
| 19:27.37 | *** join/#openmoko daMaestro (n=jon@fedora/damaestro) |
| 19:36.25 | *** join/#openmoko raron (n=kvirc@81.183.153.171) |
| 19:37.44 | *** join/#openmoko rddDavid51 (n=roudoudo@78.234.93.192) |
| 19:39.57 | *** join/#openmoko pleemans (n=toi@d54C2A96D.access.telenet.be) |
| 19:41.37 | mostly_useless | slaxxer: wow. |
| 19:42.07 | *** join/#openmoko gunbritt (n=arfmarf@unaffiliated/gunbritt) |
| 19:44.03 | PaulFertser | slaxxer: some android versions use incompatible Qi. |
| 20:11.19 | CIA-44 | openmoko: 03werner * r5700 10/developers/werner/cncmap/ (README rect/rect.c zscan/ zscan/Makefile zscan/zscan.c): |
| 20:11.19 | CIA-44 | openmoko: - README: explained what all this is about |
| 20:11.20 | CIA-44 | openmoko: - README, rect/rect.c: described "normalized" format used by "rect" |
| 20:11.20 | CIA-44 | openmoko: - zscan/: new utility - a surface scanner |
| 20:11.40 | *** join/#openmoko neomilium (n=quassel@lns-bzn-30-82-253-191-200.adsl.proxad.net) |
| 20:15.52 | *** join/#openmoko freelock (n=john@dsl081-165-076.sea1.dsl.speakeasy.net) |
| 20:21.24 | *** join/#openmoko gunbritt (n=arfmarf@unaffiliated/gunbritt) |
| 20:21.39 | *** join/#openmoko Sharwin_F (n=Sharwin_@90.163.63.137) |
| 20:32.30 | *** part/#openmoko der-lehmann (n=stefan@188-192-133-169-dynip.superkabel.de) |
| 20:33.48 | *** join/#openmoko der-lehmann (n=stefan@188-192-133-169-dynip.superkabel.de) |
| 20:50.29 | slaxxer | whats wow ? |
| 20:50.41 | slaxxer | <PROTECTED> |
| 20:51.51 | slaxxer | i require positive reinforcement occasionally |
| 20:52.17 | SpeedEvil | has no idea what it is. |
| 20:56.47 | *** join/#openmoko SpeedEvil1 (n=user@tor/regular/SpeedEvil) |
| 20:57.54 | *** join/#openmoko SpeedEvil1 (n=user@tor/regular/SpeedEvil) |
| 20:58.55 | *** join/#openmoko SpeedEvil1 (n=user@tor/regular/SpeedEvil) |
| 20:59.24 | *** join/#openmoko kkb110 (n=kkb110@wifi-roaming-0-219.nss.udel.edu) |
| 20:59.59 | *** join/#openmoko runner (n=runner@bzq-82-81-241-75.cablep.bezeqint.net) |
| 21:04.06 | *** join/#openmoko ZaPPaS (n=zappas@dslb-084-056-186-189.pools.arcor-ip.net) |
| 21:04.37 | *** join/#openmoko Sharwin_F- (n=Sharwin_@167.pool85-50-92.dynamic.orange.es) |
| 21:09.01 | *** part/#openmoko dwb (n=david@a177027.upc-a.chello.nl) |
| 21:10.53 | *** join/#openmoko [Rui] (n=Rui@81.84.169.253) |
| 21:21.40 | *** join/#openmoko juan_arandaalva1 (n=jaranda@201.171.209.148.dsl.dyn.telnor.net) |
| 21:22.59 | *** part/#openmoko arw_ (i=foobar@190.26.233.113) |
| 21:28.43 | *** join/#openmoko dns53 (n=dns@203.171.196.58) |
| 21:32.17 | *** join/#openmoko soltys (i=soltys@soltys.soad.pl) |
| 21:32.29 | *** join/#openmoko Cervajz (n=Cervajz@opensuse/member/Cervajz) |
| 21:38.56 | *** join/#openmoko Cervajz1 (n=Cervajz@mbl-109-39-101.dsl.net.pk) |
| 21:45.13 | *** join/#openmoko Cervajz1 (n=Cervajz@mbl-109-39-199.dsl.net.pk) |
| 21:46.00 | *** join/#openmoko ajvogel (n=quassel@196.210.224.131) |
| 21:46.06 | *** part/#openmoko CoreDump|Zzzz (n=mhentges@nslu2-linux/CoreDumpHome) |
| 21:56.09 | *** join/#openmoko Fox_M|afk (i=quakeman@g226128215.adsl.alicedsl.de) |
| 21:56.20 | *** part/#openmoko vanous123 (n=vanous@85.93.174.26) |
| 22:03.40 | *** join/#openmoko Sargun (n=Sargun@atarack/Staff/Sargun) |
| 22:05.53 | *** join/#openmoko retracile (n=eli@76-204-213-211.lightspeed.allntx.sbcglobal.net) |
| 22:08.16 | jokerfox | INFO : RCU detected cpu 0 stalled after installed qtmoko |
| 22:08.42 | spydon | 0_o |
| 22:10.13 | *** join/#openmoko kkb1101 (n=kkb110@wifi-roaming-0-219.nss.udel.edu) |
| 22:15.31 | *** join/#openmoko xcasexwrka (n=rrg@79.136.62.20) |
| 22:28.14 | *** part/#openmoko der-lehmann (n=stefan@188-192-133-169-dynip.superkabel.de) |
| 22:34.19 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * r06ddaa1d309f 10/fsogsmd/src/lib/ (atcommand.vala atmediators.vala mediator.vala): fsogsmd: move response checkers out of mediator interface; don't ignore error for reading phonebooks |
| 22:34.38 | *** join/#openmoko dns53 (n=dns@203.171.199.231) |
| 22:35.41 | *** join/#openmoko GovCon (n=GC@unaffiliated/govcon) |
| 22:43.10 | *** join/#openmoko dns_ (n=dns@203.171.199.173) |
| 22:44.11 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * r937f877da7e3 10/libfsotransport/fsotransport/ (basetransport.vala commandqueue.vala): libfsotransport: silence++ |
| 22:51.58 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * r16ee4ca011d5 10/libfsotransport/fsotransport/ (6 files): libfsotransport: debug output cosmetics |
| 23:08.30 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * r51c3bc075ca8 10/fsogsmd/src/lib/consts.vala: fsogsmd: prefer DC instead of LD; support 'unknown' phonebooks on SIM |
| 23:19.10 | *** join/#openmoko SpeedEvil (n=user@tor/regular/SpeedEvil) |
| 23:24.35 | *** join/#openmoko juan_arandaalvar (n=jaranda@201.130.170.242.dsl.dyn.telnor.net) |
| 23:26.39 | *** join/#openmoko pablomino (n=pablo@201.215.181.49) |
| 23:26.56 | *** part/#openmoko pablomino (n=pablo@201.215.181.49) |
| 23:37.40 | CIA-44 | freesmartphone.org: 03mickey 07cornucopia * r3e76bc8100a1 10/libfsobasics/fsobasics/logger.vala: libfsobasics: enable colored output for logger 'stderr:colors' |
| 23:44.55 | *** join/#openmoko arw_ (i=foobar@190.26.233.113) |
| 23:50.09 | *** join/#openmoko retracile_ (n=eli@76-204-213-211.lightspeed.allntx.sbcglobal.net) |
| 23:53.21 | *** part/#openmoko RigacciOrg (n=niccolo@host26-16-static.57-88-b.business.telecomitalia.it) |
