| 00:04.41 | sicu | do I use Aux or PwrBtn to move down in uBoot options? |
| 00:04.56 | mwester | Aux |
| 00:05.02 | mwester | Pwr selects |
| 00:05.10 | sicu | great ... thx |
| 00:05.15 | *** join/#openmoko ChandleWEi (n=chandle@61.170.246.173) |
| 00:05.16 | mwester | er, I mean, Pwr executes the selected item |
| 00:05.25 | *** part/#openmoko ChandleWEi (n=chandle@61.170.246.173) |
| 00:06.09 | *** join/#openmoko tomboy64 (n=tomboy64@e179034030.adsl.alicedsl.de) |
| 00:06.33 | m0nt0 | where are in 2008.x the button behaviour defined? |
| 00:09.27 | sicu | argh .... my attempt at running fdom from sd failed :/ |
| 00:09.36 | sicu | s3c2410: debugfs dir creation failed -19 |
| 00:09.36 | sicu | Kernel panic - not syncing: No init found. Try passing init= option to kernel |
| 00:10.08 | mwester | you broke it. |
| 00:10.22 | mwester | You'll have to send it to me, now. |
| 00:10.25 | sicu | hmmm ... how ? |
| 00:10.26 | sicu | haha |
| 00:10.51 | mwester | I have a replacement for you, already set up to boot from SD. |
| 00:10.52 | sicu | that was not a: 'how do i send it to you?' ;p |
| 00:11.16 | mwester | (never mind that the replacement is a european-only Neo1973) |
| 00:11.17 | sicu | i'm sure there's a catch |
| 00:11.43 | mwester | suspects that this won't work. |
| 00:12.07 | sicu | hehe ... you should've waited a couple of hrs ... i might've been tired enough |
| 00:12.17 | sicu | and perhaps fed up with this :p |
| 00:12.19 | mwester | First thing to check is the rootfs= in your u-boot options. |
| 00:12.22 | balrog | sicu: the debugfs warning is a red herring, i've hit it too and it's fixed in current kernel (the warning only) :p |
| 00:13.11 | mwester | Make sure that you have the correct partition specified. |
| 00:13.28 | sicu | and how/where do i do that? |
| 00:13.46 | mwester | where you set it in the first place . |
| 00:13.49 | mwester | u-boot. |
| 00:13.53 | sicu | just received my mSD today ... so this is all new to me |
| 00:14.01 | mwester | hmmm... |
| 00:14.24 | mwester | ok, so did you change any u-boot env vars? |
| 00:14.26 | sicu | i've been using internal flash uptil now |
| 00:14.29 | sicu | nope ... |
| 00:14.36 | mwester | Ah. |
| 00:14.42 | *** join/#openmoko raster (n=raster@124-170-224-116.dyn.iinet.net.au) |
| 00:14.50 | mwester | oh no. |
| 00:15.33 | mwester | Ah. http://wiki.openmoko.org/wiki/Booting_from_SD <--- very helpful page. |
| 00:15.43 | mwester | (thought it got deleted, but I just can't spell) |
| 00:15.44 | sicu | http://wiki.openmoko.org/wiki/Booting_from_SD#Populate_SD_card told me that it might not be necessary |
| 00:16.03 | sicu | but guess i will have to =] |
| 00:16.18 | raster | biatchez! |
| 00:17.06 | mwester | sicu: You should at least check to make sure it's right. |
| 00:17.26 | sicu | hehe ... guess i will have to now :p |
| 00:17.26 | mwester | If the boot entry is right in u-boot, then check your new root filesystem to make sure that it is laid out correctly. |
| 00:17.40 | sicu | ok ... thanks |
| 00:20.27 | tomboy64 | hmm |
| 00:20.44 | mwester | hums along |
| 00:20.56 | tomboy64 | someone here who could tell me why gsm0710muxd has had its initscript removed? |
| 00:21.13 | mwester | Does anything use it? |
| 00:21.33 | mwester | FSO? ASU? Qtopia? |
| 00:21.40 | *** join/#openmoko LuYu (n=whatever@118-168-235-162.dynamic.hinet.net) |
| 00:21.56 | raster | yo momma? |
| 00:22.35 | mwester | 'twas a serious question, really. Trying to help... |
| 00:24.27 | mwester | But in any case, AFAIK Qtopia doesn't use an external mux, and neither did ASU (it uses the Qtopia framework), and last time I looked FSO has its own internal python mux that was not a separate executable. Hence the question. |
| 00:26.23 | *** join/#openmoko Jeol (n=joel@h-252-158.A158.priv.bahnhof.se) |
| 00:27.33 | *** join/#openmoko cnwdup_ (n=harlekin@hnvr-4dbd7f9c.pool.einsundeins.de) |
| 00:28.47 | *** join/#openmoko max_posedon (n=max_pose@80.249.94.44) |
| 00:36.48 | tomboy64 | oh |
| 00:37.08 | tomboy64 | mwester: http://freeyourphone.de/portal_v1/viewtopic.php?f=21&t=295 |
| 00:37.27 | tomboy64 | this is a tutorial for getting gprs running with a gui |
| 00:37.44 | tomboy64 | along with easy management of wlan (??) |
| 00:39.32 | tomboy64 | i want to have gprs running. simply and reliable switched on and off. without cl-interaction - e.g. with gui. and being callable at the same time. |
| 00:45.16 | tomboy64 | oh |
| 00:45.20 | tomboy64 | and that all in 2008.9 |
| 00:45.32 | tomboy64 | btw - when is the next point release scheduled? |
| 00:47.48 | *** join/#openmoko vallor (n=Rock@pdpc/supporter/monthlygold/vallor) |
| 00:49.32 | *** join/#openmoko sicu_ (n=sicu@cm-84.208.99.25.getinternet.no) |
| 00:52.37 | sicu_ | mwester: does this look ok for having followed the wiki?: http://pastebin.com/d7ee351b6 |
| 00:55.24 | sicu_ | mwester: i set partition1 as fat and partition2 as ext2 |
| 00:56.49 | *** join/#openmoko mgregson (n=mgregson@129-97-136-103.uwaterloo.ca) |
| 00:57.13 | *** join/#openmoko slchen (n=slchen@122-116-241-177.HINET-IP.hinet.net) |
| 00:57.43 | sicu_ | do i have to write: uImage.bin or is ${sd_image_name} ok? |
| 00:58.24 | sicu_ | sigh .... guess i'm too tired ... will try this stuff tomorrow i guess |
| 01:00.03 | *** join/#openmoko uhsf_xmpp (n=uhsf@modemcable081.210-20-96.mc.videotron.ca) |
| 01:00.16 | *** part/#openmoko sicu_ (n=sicu@cm-84.208.99.25.getinternet.no) |
| 01:00.25 | *** join/#openmoko uhsf_xmpp (n=uhsf@modemcable081.210-20-96.mc.videotron.ca) |
| 01:01.56 | *** join/#openmoko uhsf (n=uhsf@modemcable081.210-20-96.mc.videotron.ca) |
| 01:02.58 | *** join/#openmoko Ko_deZ (n=mt@062016213048.customer.alfanett.no) |
| 01:04.59 | *** join/#openmoko wejp (n=wejp@moon.spacetechnology.net) |
| 01:11.56 | Kensan | raster: how's your treo doing? |
| 01:12.37 | Kensan | raster: any success with gsmd2? |
| 01:22.42 | *** join/#openmoko johngay (n=john@adsl-2-122-34.mia.bellsouth.net) |
| 01:32.24 | *** join/#openmoko mwester (n=mwester@75.57.149.97) |
| 01:32.27 | *** join/#openmoko mwester_ (n=mwester@75.57.149.97) |
| 01:37.39 | *** join/#openmoko Raylz (n=bernhard@193.170.53.51) |
| 01:39.20 | Raylz | <PROTECTED> |
| 01:40.22 | *** join/#openmoko vallor (n=Rock@eva.wba.ponzo.net) |
| 01:44.12 | *** join/#openmoko daMaestro (n=jon@fedora/damaestro) |
| 02:09.22 | gurugentoo | woot, I just got a sweet new tiny flexible keyboard for my FR |
| 02:10.34 | *** join/#openmoko Ainulindale (n=ainu@calaquendi.org) |
| 02:11.52 | gurugentoo | the layout is a bit odd...it's kind of lacking the home/end/pgup/pgdn |
| 02:12.04 | gurugentoo | o well |
| 02:13.39 | *** join/#openmoko bmidgley (n=bmidgley@c-24-2-92-215.hsd1.ut.comcast.net) |
| 02:16.24 | *** join/#openmoko Proton24 (n=proton@p57BA4C40.dip.t-dialin.net) |
| 02:17.51 | *** join/#openmoko FredFoka1 (n=fred@39-15.105-92.cust.bluewin.ch) |
| 02:23.59 | gurugentoo | <rant>there really should have been a usb adapter included with the phone, especially considering the price </rant> |
| 02:26.42 | KenYoung | gurugentoo, What kind of adapter? |
| 02:27.06 | gurugentoo | usb A to micro usb |
| 02:27.43 | gurugentoo | to let you plug in devices |
| 02:27.50 | gurugentoo | like a keyboard |
| 02:28.08 | KenYoung | gurugentoo, OK, I understand now. |
| 02:37.08 | *** join/#openmoko lawnjart (n=scsh@pool-96-225-204-142.ptldor.fios.verizon.net) |
| 02:37.14 | *** part/#openmoko lawnjart (n=scsh@pool-96-225-204-142.ptldor.fios.verizon.net) |
| 02:37.34 | *** join/#openmoko palichis (n=palichis@190.154.61.251) |
| 02:46.57 | nemik | wow, 900 finally back in stock |
| 03:00.54 | *** join/#openmoko nigel_c_ (n=nigel_c@mail.crca.org.au) |
| 03:05.14 | *** join/#openmoko ChanServ (ChanServ@services.) |
| 03:05.14 | *** join/#openmoko slchen (n=slchen@122-116-241-177.HINET-IP.hinet.net) [NETSPLIT VICTIM] |
| 03:05.14 | *** join/#openmoko dns53 (n=dns@ppp246-215.static.internode.on.net) |
| 03:05.14 | *** join/#openmoko lysanderslair (n=jeff@bas5-london14-1088883986.dsl.bell.ca) [NETSPLIT VICTIM] |
| 03:05.14 | *** join/#openmoko rcxdude (n=rcxdude@host86-164-152-96.range86-164.btcentralplus.com) [NETSPLIT VICTIM] |
| 03:05.14 | *** join/#openmoko tommy (i=tommy@c-28d3e155.147-500-64736c12.cust.bredbandsbolaget.se) [NETSPLIT VICTIM] |
| 03:05.15 | *** join/#openmoko JaMa (n=JaMa@chaos.mk.cvut.cz) |
| 03:05.15 | *** join/#openmoko christooss (n=matic@BSN-95-239-148.dial-up.dsl.siol.net) [NETSPLIT VICTIM] |
| 03:05.15 | *** join/#openmoko q0b (n=q0b@xdsl-87-78-68-130.netcologne.de) [NETSPLIT VICTIM] |
| 03:05.15 | *** join/#openmoko vinicius (n=vininim@189.26.203.90.adsl.gvt.net.br) [NETSPLIT VICTIM] |
| 03:05.15 | *** join/#openmoko edistar_ (n=edistar@ip503ddd09.speed.planet.nl) [NETSPLIT VICTIM] |
| 03:05.15 | *** join/#openmoko cedric (n=cedric@enlightenment/developer/cedric) |
| 03:05.15 | *** join/#openmoko DocScrutinizer2 (n=jr-N810@p5493C139.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 03:05.15 | *** join/#openmoko d-b (n=alias@unaffiliated/db/x-040147) |
| 03:05.15 | *** join/#openmoko mmontour (n=mmontour@S01060016b606e65a.vc.shawcable.net) [NETSPLIT VICTIM] |
| 03:05.15 | *** join/#openmoko Raigedas (n=OpenSour@hst-241-40.splius.lt) [NETSPLIT VICTIM] |
| 03:05.15 | *** join/#openmoko BobOfDoom (n=ato@dingo.meshy.org) |
| 03:05.16 | *** join/#openmoko mosez (n=mosez@odin.mosez.net) [NETSPLIT VICTIM] |
| 03:05.16 | *** join/#openmoko TobiX (i=tobias@zoidberg.org) [NETSPLIT VICTIM] |
| 03:05.16 | *** join/#openmoko beni_ (n=beni@skyforcesystems.de) [NETSPLIT VICTIM] |
| 03:05.16 | *** join/#openmoko zash (n=zash@zash.se) [NETSPLIT VICTIM] |
| 03:05.16 | *** join/#openmoko tobyS (i=crazyuse@hartes-php.de) [NETSPLIT VICTIM] |
| 03:05.16 | *** join/#openmoko simon_ (n=simon@w208.wist.uni-linz.ac.at) |
| 03:05.16 | *** join/#openmoko konqui[tm] (i=freenode@deinbnc.go4bnc.de) [NETSPLIT VICTIM] |
| 03:05.16 | *** join/#openmoko mattl (n=mattl@fsf/staff/mattl) |
| 03:05.16 | *** join/#openmoko Kensan (n=ken@gw.ptr-80-238-175-25.customer.ch.netstream.com) |
| 03:05.16 | *** join/#openmoko Elleo (n=Elleo@unaffiliated/elleo) [NETSPLIT VICTIM] |
| 03:05.17 | *** join/#openmoko toggles_w (n=toggles@tommywatson.com) |
| 03:05.17 | *** join/#openmoko trickie (n=trickie@hgaulton.xs4all.nl) |
| 03:05.17 | *** join/#openmoko nochd (n=nick@216-139-208-242.aus.us.siteprotect.com) [NETSPLIT VICTIM] |
| 03:05.17 | *** join/#openmoko TeringTuby (n=maarten@195-241-125-243.ip.telfort.nl) |
| 03:05.17 | *** join/#openmoko Honza (n=Elenril@abak-ujezd.abak.cz) [NETSPLIT VICTIM] |
| 03:05.17 | *** join/#openmoko Psi (n=benw@ip-58-28-158-238.static-xdsl.xnet.co.nz) [NETSPLIT VICTIM] |
| 03:05.17 | *** join/#openmoko benJIman (n=benji@benjiweber.co.uk) |
| 03:05.17 | *** join/#openmoko ljp (n=lpotter@218.185.108.156) |
| 03:05.18 | *** join/#openmoko Kred (n=teemu@castor.utu.fi) [NETSPLIT VICTIM] |
| 03:05.18 | *** join/#openmoko doc|home (n=doc@gentoo/contributor/doc-007) |
| 03:05.18 | *** join/#openmoko ruxpin (n=pkunk@195.148.225.17) [NETSPLIT VICTIM] |
| 03:05.18 | *** join/#openmoko Kaloz (i=kaloz@openwrt/developer/Kaloz) |
| 03:05.18 | *** join/#openmoko hadara_ (i=hadara@bsd.ee) [NETSPLIT VICTIM] |
| 03:05.18 | *** join/#openmoko nemik (n=cyanact@c-67-173-76-34.hsd1.il.comcast.net) |
| 03:05.18 | *** join/#openmoko kelvie (n=kelvie@S0106000f665a5c2a.vc.shawcable.net) [NETSPLIT VICTIM] |
| 03:05.18 | *** join/#openmoko ieatlint (n=ieatlint@tehinterweb.com) [NETSPLIT VICTIM] |
| 03:05.18 | *** join/#openmoko orospakr (n=orospakr@ip-64-15-152-71.static.privatedns.com) [NETSPLIT VICTIM] |
| 03:05.19 | *** join/#openmoko pantsd_ (i=holden@66.207.162.62) [NETSPLIT VICTIM] |
| 03:05.19 | *** join/#openmoko torpor (n=torpor@62.75.148.116) [NETSPLIT VICTIM] |
| 03:05.19 | *** join/#openmoko koredn (n=kn@busimess.org) [NETSPLIT VICTIM] |
| 03:05.19 | *** mode/#openmoko [+o ChanServ] by irc.freenode.net |
| 03:06.21 | *** join/#openmoko kelvie (n=kelvie@S0106000f665a5c2a.vc.shawcable.net) |
| 03:25.44 | *** join/#openmoko icman (n=icman@123-240-172-254.cctv.dynamic.lsc.net.tw) |
| 03:25.52 | *** join/#openmoko mbuf (n=user@61.16.248.242) |
| 03:35.34 | *** join/#openmoko swc|666 (n=swc|666@unaffiliated/swc666/x-4934821) |
| 03:36.31 | *** join/#openmoko Ainulindale (n=ainu@calaquendi.org) |
| 04:00.02 | *** join/#openmoko arndot (n=arndt@port-92-196-82-120.dynamic.qsc.de) |
| 04:11.00 | *** join/#openmoko raster (n=raster@124-170-224-116.dyn.iinet.net.au) |
| 04:15.41 | *** join/#openmoko ChandleWEi (n=chandle@61.170.246.173) |
| 04:21.41 | *** join/#openmoko DrRabbit (n=tuna@ip70-176-117-108.ph.ph.cox.net) |
| 04:24.20 | *** join/#openmoko datachaos (n=datachao@189.27.191.132.adsl.gvt.net.br) |
| 04:24.37 | *** join/#openmoko nicholas_ (n=nicholas@72.252.29.2) |
| 04:25.48 | *** join/#openmoko dwb (n=david@pdpc/supporter/active/dwb) |
| 04:28.24 | *** join/#openmoko aggtrfrad (n=nona@CPE0014bf3f862a-CM0018c0d9db72.cpe.net.cable.rogers.com) |
| 04:29.26 | *** join/#openmoko arndtroide (n=arndt@port-92-196-118-51.dynamic.qsc.de) |
| 04:38.18 | *** join/#openmoko icman (n=icman@123-240-172-254.cctv.dynamic.lsc.net.tw) |
| 04:40.02 | *** join/#openmoko poisonapples (n=andrew@adsl-251-20-5.jan.bellsouth.net) |
| 04:40.33 | poisonapples | is the problem with 3g sim cards hardware or software? |
| 04:47.38 | *** part/#openmoko poisonapples (n=andrew@adsl-251-20-5.jan.bellsouth.net) |
| 04:48.22 | *** join/#openmoko DocScrutinizer2 (n=jr-N810@p5493D388.dip.t-dialin.net) |
| 04:49.43 | *** join/#openmoko jas4711 (n=jas@c80-216-18-41.bredband.comhem.se) |
| 04:54.14 | *** join/#openmoko vaiursch (n=erwin@80-218-127-23.dclient.hispeed.ch) |
| 04:57.28 | *** join/#openmoko rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 04:59.07 | *** join/#openmoko grummel69 (n=christia@cl-13.dus-01.de.sixxs.net) |
| 05:35.00 | *** join/#openmoko cnwdup (n=harlekin@hnvr-4dbd7f9c.pool.einsundeins.de) [NETSPLIT VICTIM] |
| 05:35.00 | *** join/#openmoko LuYu (n=whatever@118-168-235-162.dynamic.hinet.net) [NETSPLIT VICTIM] |
| 05:35.00 | *** join/#openmoko yang (i=yang@static-ip-62-75-255-125.inaddr.intergenia.de) |
| 05:35.00 | *** join/#openmoko `pwgen` (n=ew@90.185.120.221) [NETSPLIT VICTIM] |
| 05:35.00 | *** join/#openmoko rwhitby (n=rwhitby@au1.astc-design.com) |
| 05:35.00 | *** join/#openmoko ayeuu (n=ayeuu@tss37-1-82-228-161-185.fbx.proxad.net) [NETSPLIT VICTIM] |
| 05:35.00 | *** join/#openmoko pb_ (n=pb@88-111-134-150.dynamic.dsl.as9105.com) |
| 05:35.00 | *** join/#openmoko piksi- (n=piksi@kosh.hut.fi) [NETSPLIT VICTIM] |
| 05:35.00 | *** join/#openmoko pepin (n=yann@pat35-3-82-245-140-228.fbx.proxad.net) [NETSPLIT VICTIM] |
| 05:35.00 | *** join/#openmoko ixs (n=andreas@lacht.ueber.gattinnen-im-netz.de) [NETSPLIT VICTIM] |
| 05:35.00 | *** join/#openmoko jzk2 (i=jzk@gateway/shell/rootnode.net/x-caf094cf0ea61ca8) [NETSPLIT VICTIM] |
| 05:35.01 | *** join/#openmoko [JT] (n=justin@c-24-20-75-90.hsd1.or.comcast.net) [NETSPLIT VICTIM] |
| 05:35.01 | *** join/#openmoko weirdedout (n=gonePost@220-253-14-131.VIC.netspace.net.au) [NETSPLIT VICTIM] |
| 05:35.01 | *** join/#openmoko dwmw2_gone (i=ctrlprox@90.155.92.195) |
| 05:35.01 | *** join/#openmoko drjnut (i=proxy@caladan.darksnow.org) |
| 05:35.01 | *** join/#openmoko rtp (n=rtp@sat78-7-88-166-121-96.fbx.proxad.net) |
| 05:36.48 | *** join/#openmoko Tanuva (n=tanuva@e177231223.adsl.alicedsl.de) |
| 05:39.40 | *** join/#openmoko alephnull (n=alok@122.167.88.216) |
| 05:42.09 | *** join/#openmoko christooss1 (n=matic@BSN-95-239-148.dial-up.dsl.siol.net) |
| 05:58.16 | *** join/#openmoko ChandleWEi (n=chandle@61.170.246.173) |
| 06:13.58 | *** join/#openmoko data|2 (n=datachao@189.27.191.132.adsl.gvt.net.br) |
| 06:17.48 | *** join/#openmoko Sargun (n=Sargun@atarack/staff/sargun) |
| 06:19.59 | *** join/#openmoko mrmoku (n=mok@ppp-93-104-125-89.dynamic.mnet-online.de) |
| 06:22.55 | *** join/#openmoko arzej (n=arzej@dgk97.neoplus.adsl.tpnet.pl) |
| 06:25.37 | *** join/#openmoko rddDavid51 (n=roudoudo@gar31-1-82-224-8-235.fbx.proxad.net) |
| 06:26.13 | *** join/#openmoko christooss (n=matic@BSN-95-239-148.dial-up.dsl.siol.net) |
| 06:26.56 | *** join/#openmoko HellDragon (n=jd@modemcable100.136-203-24.mc.videotron.ca) |
| 06:30.43 | *** join/#openmoko thrashold (n=europan@3mhz.net) |
| 06:34.18 | *** join/#openmoko grummel69 (n=christia@cl-13.dus-01.de.sixxs.net) |
| 06:36.19 | *** join/#openmoko Azalyn (n=junon@modemcable061.93-83-70.mc.videotron.ca) |
| 06:39.20 | *** join/#openmoko Lijian (n=lijian@218.58.59.73) |
| 06:40.48 | *** join/#openmoko grummel69 (n=christia@cl-13.dus-01.de.sixxs.net) |
| 06:46.00 | *** join/#openmoko sakkara (n=sakkara@d83-187-185-42.cust.tele2.at) |
| 06:52.57 | *** join/#openmoko froksen (n=froksen@87.54.254.190) |
| 06:58.38 | *** join/#openmoko d-b (n=alias@203-214-159-11.dyn.iinet.net.au) |
| 07:04.44 | *** join/#openmoko d-b_ (n=alias@124-171-60-138.dyn.iinet.net.au) |
| 07:06.40 | *** join/#openmoko andrenarchy (n=andrenar@dslb-088-065-106-028.pools.arcor-ip.net) |
| 07:07.05 | *** join/#openmoko datachaos (n=datachao@189.27.191.132.adsl.gvt.net.br) |
| 07:28.18 | *** part/#openmoko FredFoka1 (n=fred@39-15.105-92.cust.bluewin.ch) |
| 07:38.44 | *** join/#openmoko Ainulindale (n=ainu@calaquendi.org) |
| 07:41.03 | *** join/#openmoko anno^da_ (n=anno^da@p5B07DB95.dip.t-dialin.net) |
| 07:42.23 | pantsd_ | I want to re-build wpa_supplicant package, is there an easy way to do that without doing a full mokomake or bb equivalent? |
| 07:49.35 | *** join/#openmoko bipak_ (n=bip@p57B83D95.dip.t-dialin.net) |
| 07:50.10 | *** join/#openmoko Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 07:51.05 | *** join/#openmoko mrmoku (n=mok@ppp-93-104-125-89.dynamic.mnet-online.de) |
| 07:51.37 | *** join/#openmoko mbuf (n=user@61.16.248.242) |
| 07:52.26 | *** join/#openmoko fifafrazer (n=as@3e6b01fb.rev.stofanet.dk) |
| 07:52.54 | *** join/#openmoko cga (n=cga@94.36.121.222) |
| 07:54.31 | *** join/#openmoko froksen (n=froksen@87.54.254.190) |
| 07:54.42 | *** join/#openmoko emonkey-t (n=emonkey@static-pro-212-101-27-121.adsl.solnet.ch) |
| 07:54.52 | *** join/#openmoko Cervajz (n=Cervajz@r9ha50.net.upc.cz) |
| 07:59.56 | *** part/#openmoko keithp (n=keithp@home.keithp.com) |
| 08:01.41 | CIA-49 | openmoko: 03john_lee 07org.openmoko.dev * r55a9541182f5 10/packages/openmoko-projects/illume-theme-asu_svn.bb: illume-theme-asu: fix install argument |
| 08:02.18 | *** join/#openmoko baze (n=baze@g227023234.adsl.alicedsl.de) |
| 08:03.41 | *** join/#openmoko niki (n=niki@0x5553169c.adsl.cybercity.dk) |
| 08:06.17 | *** join/#openmoko Isajha (n=Isajha4@wrzb-4d00cfd9.pool.mediaWays.net) |
| 08:16.47 | *** join/#openmoko AVee (n=AVee@edsger.d6.nl) |
| 08:21.10 | *** join/#openmoko TeringTu1y (n=maarten@195-241-125-243.ip.telfort.nl) |
| 08:21.59 | *** join/#openmoko t_s_o (n=tso@77.84-49-129.nextgentel.com) |
| 08:25.01 | *** join/#openmoko fobos (n=fobos@78.90.88.244) |
| 08:26.56 | *** part/#openmoko tessier (n=treed@kernel-panic/sex-machines) |
| 08:32.32 | *** join/#openmoko Hire1 (n=hire@host131-236-dynamic.33-79-r.retail.telecomitalia.it) |
| 08:32.42 | *** join/#openmoko drath (n=vmaster@p5B07CE6D.dip.t-dialin.net) |
| 08:33.27 | *** join/#openmoko max_posedon (n=max_pose@80.249.94.44) |
| 08:33.30 | *** join/#openmoko norro (n=norro@e181126216.adsl.alicedsl.de) |
| 08:35.43 | *** join/#openmoko bluntastic (n=ephcon@student166-36.hampshire.edu) |
| 08:51.47 | *** join/#openmoko christooss1 (n=matic@BSN-95-239-148.dial-up.dsl.siol.net) |
| 08:54.58 | *** join/#openmoko goxboxlive_ (n=goxboxli@139.84-48-212.nextgentel.com) |
| 08:56.16 | *** join/#openmoko morphis (n=morphis@p54899D8D.dip0.t-ipconnect.de) |
| 08:58.02 | *** join/#openmoko mrmoku (n=mok@ppp-93-104-125-89.dynamic.mnet-online.de) |
| 08:58.14 | *** join/#openmoko flaushy (n=flaushy@vs240161.vserver.de) |
| 08:59.44 | *** join/#openmoko zeno__ (n=zeno@97-112-155-60.clsp.qwest.net) |
| 09:00.28 | *** join/#openmoko dns53 (n=dns@ppp246-215.static.internode.on.net) |
| 09:02.18 | *** join/#openmoko almien (n=almien@87-194-198-122.bethere.co.uk) |
| 09:05.12 | *** join/#openmoko Zoup (n=Zoup@91.98.73.252) |
| 09:05.27 | Zoup | Eth0 is not detected and i got crcfail 0x1a3f on boot , any idea ? :) |
| 09:06.19 | *** join/#openmoko Batchy (n=batchy@AVelizy-155-1-45-2.w83-204.abo.wanadoo.fr) |
| 09:07.12 | *** join/#openmoko lpotter (n=ljp@CPE-124-191-144-181.vic.bigpond.net.au) |
| 09:09.15 | *** join/#openmoko Proton23 (n=proton@p57BA6ECF.dip.t-dialin.net) |
| 09:09.30 | *** join/#openmoko christooss (n=matic@BSN-95-239-148.dial-up.dsl.siol.net) |
| 09:11.52 | *** part/#openmoko swc|666 (n=swc|666@unaffiliated/swc666/x-4934821) |
| 09:18.09 | *** join/#openmoko geaaru (n=geaaru@host52-51-dynamic.40-79-r.retail.telecomitalia.it) |
| 09:19.15 | *** join/#openmoko rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 09:23.26 | *** join/#openmoko bernt (n=bernt@dslb-084-061-123-244.pools.arcor-ip.net) |
| 09:23.28 | *** join/#openmoko tholin (n=tholin@c-6464e455.04-302-6c6b701.cust.bredbandsbolaget.se) |
| 09:24.31 | *** join/#openmoko bernt (n=bernt@dslb-084-061-123-244.pools.arcor-ip.net) |
| 09:31.17 | *** join/#openmoko zedstar (n=john@fsf/member/zedstar) |
| 09:31.45 | *** join/#openmoko dodo1122_ (n=dodo1122@a91-153-138-42.elisa-laajakaista.fi) |
| 09:34.37 | *** join/#openmoko zoff99 (i=chatzill@chello080109110037.13.15.vie.surfer.at) |
| 09:34.46 | *** join/#openmoko surf2me (n=surfer@unixboard/users/surf2me) |
| 09:35.45 | *** join/#openmoko KenSentMe (n=jeroen@213-132-206-101.adsl.nlhosting.nl) |
| 09:38.18 | *** join/#openmoko _hps (n=hans@62.113.135.6) |
| 09:38.25 | _hps | Hi. |
| 09:38.43 | _hps | Is there any cure for this: |
| 09:38.46 | _hps | root@om-gta02:/etc/opkg# assassin |
| 09:38.46 | _hps | killall: packagekitd: no process killed |
| 09:38.46 | _hps | DEBUG: (pkutil.c, 90): pk_e_dbus_init: E_DBUS initialing. |
| 09:38.46 | _hps | DEBUG: (pkutil.c, 179): pk_repos_ping: Get Network status online |
| 09:38.46 | _hps | DEBUG: (dbupdate.c, 93): db_update_timestamp_check: The timestamp is 1224916067, now =1224919368 |
| 09:38.47 | _hps | DEBUG: (gears.c, 77): put_a_dim_on_screen: Put the dim on |
| 09:38.49 | _hps | assassin: symbol lookup error: assassin: undefined symbol: evas_list_append |
| 09:48.59 | *** join/#openmoko d-b (n=alias@124-171-60-138.dyn.iinet.net.au) |
| 09:52.11 | *** join/#openmoko ccube (n=ccube@ssh.ccube.de) |
| 09:53.59 | *** join/#openmoko d-b_ (n=alias@124-168-170-209.dyn.iinet.net.au) |
| 09:57.08 | *** join/#openmoko morricone (n=foobar@dslb-092-074-199-006.pools.arcor-ip.net) |
| 10:04.06 | *** join/#openmoko PBeck (n=PBeck@HSI-KBW-091-089-092-154.hsi2.kabelbw.de) |
| 10:04.46 | PBeck | hi |
| 10:05.23 | CIA-49 | openmoko: 03john_lee 07org.openmoko.dev * r69146d9c7fcc 10/packages/openmoko-projects/illume-theme-illume_svn.bb: illume-theme-illume: fix install argument |
| 10:12.10 | *** join/#openmoko leinir (n=leinir@amarok/usability/leinir) |
| 10:12.55 | *** join/#openmoko pwerken (n=pwerken@83.119.198.36) |
| 10:28.34 | *** join/#openmoko pwerken (n=pwerken@83.119.198.36) [NETSPLIT VICTIM] |
| 10:28.34 | *** join/#openmoko leinir (n=leinir@amarok/usability/leinir) [NETSPLIT VICTIM] |
| 10:28.34 | *** join/#openmoko d-b_ (n=alias@124-168-170-209.dyn.iinet.net.au) |
| 10:28.34 | *** join/#openmoko flaushy (n=flaushy@vs240161.vserver.de) |
| 10:28.34 | *** join/#openmoko Hire1 (n=hire@host131-236-dynamic.33-79-r.retail.telecomitalia.it) [NETSPLIT VICTIM] |
| 10:28.34 | *** join/#openmoko cnwdup (n=harlekin@hnvr-4dbd7f9c.pool.einsundeins.de) [NETSPLIT VICTIM] |
| 10:28.34 | *** join/#openmoko LuYu (n=whatever@118-168-235-162.dynamic.hinet.net) [NETSPLIT VICTIM] |
| 10:28.35 | *** join/#openmoko yang (i=yang@CAcert/Assurer/yang) |
| 10:28.35 | *** join/#openmoko `pwgen` (n=ew@90.185.120.221) [NETSPLIT VICTIM] |
| 10:28.35 | *** join/#openmoko rwhitby (n=rwhitby@au1.astc-design.com) |
| 10:28.35 | *** join/#openmoko ayeuu (n=ayeuu@tss37-1-82-228-161-185.fbx.proxad.net) [NETSPLIT VICTIM] |
| 10:28.35 | *** join/#openmoko pb_ (n=pb@88-111-134-150.dynamic.dsl.as9105.com) |
| 10:28.35 | *** join/#openmoko piksi- (n=piksi@kosh.hut.fi) [NETSPLIT VICTIM] |
| 10:28.35 | *** join/#openmoko pepin (n=yann@pat35-3-82-245-140-228.fbx.proxad.net) [NETSPLIT VICTIM] |
| 10:28.35 | *** join/#openmoko ixs (n=andreas@lacht.ueber.gattinnen-im-netz.de) [NETSPLIT VICTIM] |
| 10:28.35 | *** join/#openmoko jzk2 (i=jzk@gateway/shell/rootnode.net/x-caf094cf0ea61ca8) [NETSPLIT VICTIM] |
| 10:28.35 | *** join/#openmoko [JT] (n=justin@c-24-20-75-90.hsd1.or.comcast.net) [NETSPLIT VICTIM] |
| 10:28.35 | *** join/#openmoko weirdedout (n=gonePost@220-253-14-131.VIC.netspace.net.au) [NETSPLIT VICTIM] |
| 10:28.35 | *** join/#openmoko dwmw2_gone (i=ctrlprox@90.155.92.195) |
| 10:28.36 | *** join/#openmoko drjnut (i=proxy@caladan.darksnow.org) [NETSPLIT VICTIM] |
| 10:28.36 | *** join/#openmoko rtp (n=rtp@sat78-7-88-166-121-96.fbx.proxad.net) [NETSPLIT VICTIM] |
| 10:28.41 | *** join/#openmoko leinir (n=leinir@cpe.atm2-0-128125.0x3ef30936.bynxx18.customer.tele.dk) |
| 10:29.45 | CIA-49 | freesmartphone.org: 03sudharsh 07openmoko-gsoc2008 * r2ee1b9ce0640 10/fsod/src/subsystems/Python/ (5 files): |
| 10:29.45 | CIA-49 | freesmartphone.org: 1.) Add a dummy python script |
| 10:29.45 | CIA-49 | freesmartphone.org: 2.) Initial code to invoke functions from python scripts. |
| 10:29.49 | *** join/#openmoko surf2me (n=surfer@unixboard/users/surf2me) |
| 10:31.47 | CIA-49 | freesmartphone.org: 03sudharsh 07openmoko-gsoc2008 * r518d4715d116 10/fsod/src/subsystems/Python/test.py: Oops. Forgot to add the test script |
| 10:42.18 | *** join/#openmoko bove3 (n=ns@cm-84.208.114.37.getinternet.no) |
| 10:47.30 | *** join/#openmoko poetic (n=isak@dhcp-45-22.nomad.chalmers.se) |
| 10:49.04 | *** join/#openmoko hannes-s (n=Hannes_S@d038137.adsl.hansenet.de) |
| 10:49.17 | *** join/#openmoko HauDyr (n=kim@79.142.229.123.static.knet.bolignet.dk) |
| 10:50.20 | *** join/#openmoko andrenarchy (n=andrenar@dslb-088-065-124-087.pools.arcor-ip.net) |
| 10:52.50 | *** join/#openmoko d-b (n=alias@124-168-156-177.dyn.iinet.net.au) |
| 11:03.07 | bove3 | what kernels are one supposed to use with fso? |
| 11:03.51 | *** join/#openmoko Wiedi (n=wiedi@newton-air.w.fruky.net) |
| 11:08.14 | *** join/#openmoko ptitjes (n=didier@93.2.7.240) |
| 11:12.52 | *** join/#openmoko leachim_dot_eu (n=fn-javac@U40a8.u.pppool.de) |
| 11:12.57 | leachim_dot_eu | hi |
| 11:13.24 | leachim_dot_eu | everybody know wehre i can get this style: http://scap.linuxtogo.org/files/a021c845b2f5bc5f98e3b6a78ad925f7.png ??? |
| 11:13.53 | leachim_dot_eu | *where |
| 11:17.56 | *** join/#openmoko two3four (n=erik@c83-251-40-108.bredband.comhem.se) |
| 11:19.38 | *** join/#openmoko methril|laptop (n=methril@38.72.220.87.dynamic.jazztel.es) |
| 11:20.34 | *** part/#openmoko ptitjes (n=didier@93.2.7.240) |
| 11:22.09 | CIA-49 | freesmartphone.org: 03sudharsh 07openmoko-gsoc2008 * r57a30b1ec3bb 10/fsod/ (3 files in 2 dirs): |
| 11:22.09 | CIA-49 | freesmartphone.org: Add acinclude.m4 |
| 11:22.09 | CIA-49 | freesmartphone.org: TODO: use this and create a vapi around config.h to remove hardcoding of paths |
| 11:22.48 | *** join/#openmoko spydon (n=spydon@h189n4c1o1036.bredband.skanova.com) |
| 11:23.43 | *** join/#openmoko batti112 (n=batti@p5B14BB59.dip0.t-ipconnect.de) |
| 11:23.53 | *** join/#openmoko Varox (n=Varox@p4FD47B40.dip.t-dialin.net) |
| 11:25.12 | *** join/#openmoko ajbrun (n=ajbrun@host86-151-145-146.range86-151.btcentralplus.com) |
| 11:25.44 | Kensan | mwester: ping |
| 11:25.48 | Kensan | mwester: did you see http://repo.or.cz/w/linux-2.6/openmoko-kernel.git ? |
| 11:26.49 | *** join/#openmoko GISM (n=GISM@p5B09E658.dip.t-dialin.net) |
| 11:28.21 | *** join/#openmoko Flyser (n=flyser@dialin-212-144-064-029.pools.arcor-ip.net) |
| 11:29.51 | *** join/#openmoko khorben (n=raw@AGrenoble-257-1-94-207.w86-219.abo.wanadoo.fr) |
| 11:35.16 | *** join/#openmoko Heinervdm (n=thomas@pD9E17F74.dip.t-dialin.net) |
| 11:35.59 | *** join/#openmoko Staticwave_Ace (n=Ace@d57-135-60.home.cgocable.net) |
| 11:38.07 | *** join/#openmoko ptitjes (n=didier@93.2.7.240) |
| 11:38.20 | *** part/#openmoko ptitjes (n=didier@93.2.7.240) |
| 11:42.08 | *** join/#openmoko valos[fr] (n=valos@mar92-6-82-227-150-198.fbx.proxad.net) |
| 11:44.36 | *** join/#openmoko edistar (n=edistar@ip503ddd09.speed.planet.nl) |
| 11:44.58 | *** join/#openmoko sakkara (n=sakkara@d83-187-185-42.cust.tele2.at) |
| 11:51.13 | *** join/#openmoko ericthefish (n=ivan@82-71-36-214.dsl.in-addr.zen.co.uk) |
| 11:51.38 | *** join/#openmoko apol (n=apol@62.57.49.116) |
| 11:58.25 | *** join/#openmoko Isajha (n=Isajha4@wrzb-4d00cfd9.pool.mediaWays.net) |
| 11:58.49 | *** join/#openmoko XgismX (n=GISM@p5B09D9C8.dip.t-dialin.net) |
| 12:01.54 | *** join/#openmoko C7 (n=C7@zux006-058-029.adsl.green.ch) |
| 12:02.36 | *** join/#openmoko poetic (n=isak@dhcp-47-203.nomad.chalmers.se) |
| 12:03.46 | *** join/#openmoko christooss1 (n=matic@BSN-95-239-148.dial-up.dsl.siol.net) |
| 12:04.34 | CIA-49 | freesmartphone.org: 03wessel 07fso-gpsd * rc9630bddaddf 10/init-fso-gpsd: Cleanup |
| 12:04.35 | CIA-49 | freesmartphone.org: 03wessel 07fso-gpsd * r3a59185dc564 10/ (ChangeLog configure.ac fso-gpsd.c): Removed dependency on dbus-1 |
| 12:04.35 | CIA-49 | freesmartphone.org: 03wessel 07fso-gpsd * r8f82d35ae83f 10/ (ChangeLog configure.ac): Prepared for release 0.7 |
| 12:07.23 | *** join/#openmoko Staticwave_Ace (n=Ace@d57-135-60.home.cgocable.net) |
| 12:09.37 | *** join/#openmoko LionKMP (n=lion@catv-89-133-185-26.catv.broadband.hu) |
| 12:12.58 | *** join/#openmoko alfatangoxt (n=michele@host5-20-dynamic.9-79-r.retail.telecomitalia.it) |
| 12:18.21 | *** join/#openmoko KenSentMe (n=jeroen@213-132-206-101.adsl.nlhosting.nl) |
| 12:19.32 | *** join/#openmoko fifafrazer (n=as@3e6b01fb.rev.stofanet.dk) |
| 12:20.34 | *** join/#openmoko ericthefish (n=ivan@82-71-36-214.dsl.in-addr.zen.co.uk) |
| 12:21.55 | *** join/#openmoko sicu_ (n=sicu@cm-84.208.99.25.getinternet.no) |
| 12:24.22 | CIA-49 | openmoko: 03john_lee * r4728 10/trunk/src/target/themes/illume-theme-asu/config/e.src: update to match upstream's first. known issue: icons wont show up. |
| 12:27.16 | *** join/#openmoko Zoup (n=Zoup@91.98.73.252) |
| 12:27.22 | Zoup | any idea on this ? : https://docs.openmoko.org/trac/ticket/2084 |
| 12:29.42 | *** join/#openmoko mrmoku (n=mok@ppp-93-104-125-89.dynamic.mnet-online.de) |
| 12:31.03 | *** join/#openmoko goxboxlive (n=goxboxli@139.84-48-212.nextgentel.com) |
| 12:31.26 | *** join/#openmoko balrog-k2n (n=balrog@ckt248.neoplus.adsl.tpnet.pl) |
| 12:32.58 | *** join/#openmoko grummel (n=christia@cl-13.dus-01.de.sixxs.net) |
| 12:33.54 | *** join/#openmoko unlotto (n=unlotto@ip114.rev112.brygge.net) |
| 12:36.07 | *** join/#openmoko unlotto (n=unlotto@ip114.rev112.brygge.net) |
| 12:39.30 | *** join/#openmoko norro_ (n=norro@e181116129.adsl.alicedsl.de) |
| 12:40.20 | *** join/#openmoko tommy (i=tommy@c-28d3e155.147-500-64736c12.cust.bredbandsbolaget.se) |
| 12:40.49 | *** part/#openmoko bove3 (n=ns@cm-84.208.114.37.getinternet.no) |
| 12:41.32 | *** join/#openmoko alephnull (n=alok@122.167.88.216) |
| 12:52.13 | ccube | hi |
| 12:52.19 | ccube | someone on here? |
| 12:52.41 | *** join/#openmoko t_s_o (n=tso@77.84-49-129.nextgentel.com) |
| 12:56.46 | *** join/#openmoko Deubeuliou (n=david@AFontenayssB-151-1-39-174.w83-114.abo.wanadoo.fr) |
| 13:01.14 | *** join/#openmoko pazante (n=patrik@user113.77-105-224.netatonce.net) |
| 13:01.44 | Soulnoob | So... I'm not supposed to use a FSO kernel with FDOM? |
| 13:02.22 | Zoup | Soulnoob: FDOM kernel is the same as Om2008.9 one |
| 13:02.30 | Zoup | Soulnoob: FDOM has no kernel for its own |
| 13:02.48 | Zoup | Soulnoob: if you can use om2008 kernel with FSO , Fdom one will work too :) |
| 13:03.28 | Soulnoob | I think I have a FSO one on it now... |
| 13:04.35 | Zoup | Soulnoob: no problem if FSO is working with om2008 |
| 13:09.08 | *** join/#openmoko peter_b (n=peter_b@p5497B481.dip0.t-ipconnect.de) |
| 13:10.02 | *** join/#openmoko gromez (n=gromez@unaffiliated/gromez) |
| 13:10.54 | *** join/#openmoko poetic (n=isak@dhcp-45-22.nomad.chalmers.se) |
| 13:11.56 | Soulnoob | Hehe... allright. It's partly working, but that can be said about the phone in general. |
| 13:12.39 | peter_b | hi |
| 13:12.55 | *** join/#openmoko ericthefish_h (n=ivan@82-71-36-214.dsl.in-addr.zen.co.uk) |
| 13:12.55 | peter_b | ig got poblems setting up uboot for debian |
| 13:13.09 | peter_b | uboot-envedit always gives me a crc error |
| 13:13.18 | peter_b | maybe because dfu-utild gives dfu_upload error -110 |
| 13:13.23 | *** join/#openmoko Stroller (n=Stroller@213-152-39-89.dsl.eclipse.net.uk) |
| 13:13.27 | peter_b | while reading env.orig |
| 13:13.34 | peter_b | any ideas ? |
| 13:19.36 | *** join/#openmoko FredFokan (n=fred@39-15.105-92.cust.bluewin.ch) |
| 13:20.59 | *** part/#openmoko Zoup (n=Zoup@91.98.73.252) |
| 13:22.07 | *** join/#openmoko two34 (n=erik@c83-251-40-108.bredband.comhem.se) |
| 13:26.22 | *** join/#openmoko playya (n=playya@p579B87C6.dip.t-dialin.net) |
| 13:27.28 | ccube | Hi |
| 13:27.40 | ccube | which kernel is able to boot my NEO? |
| 13:27.42 | ccube | (GTA01) |
| 13:28.01 | ccube | it always hangs on the message: Starting Kernel... |
| 13:28.06 | ccube | then nothing happens |
| 13:28.07 | ccube | :( |
| 13:35.12 | ccube | nobody can help` |
| 13:35.50 | *** join/#openmoko Demitar (n=demitar@h-2-44.A146.priv.bahnhof.se) |
| 13:39.26 | *** join/#openmoko john (n=john@adsl-2-122-34.mia.bellsouth.net) |
| 13:40.07 | balrog-k2n | ccube: which kernel is that? |
| 13:40.52 | johngay | Mornin' everybody. |
| 13:41.53 | ccube | 2.6.24 |
| 13:42.15 | ccube | i just recognized, that GTA01 isnt able to run 2008.8 |
| 13:42.16 | ccube | :( |
| 13:42.41 | ccube | so i think, that i need an older release and older kernel |
| 13:42.47 | ccube | is this correct? |
| 13:42.51 | ccube | mmh |
| 13:42.57 | balrog-k2n | ccube: it should be able to... just with special gta01 images |
| 13:42.58 | ccube | or just a newer phone! :-D |
| 13:43.05 | ccube | oh, nice |
| 13:43.06 | balrog-k2n | and with the same kernel |
| 13:43.20 | ccube | but where to get them? |
| 13:43.35 | viq | ccube: you need a kernel marked for gta01 |
| 13:43.51 | balrog-k2n | somewhere at downloads.openmoko.org i hink |
| 13:44.48 | ccube | http://downloads.openmoko.org/daily/ |
| 13:44.57 | ccube | this looks correct |
| 13:45.46 | viq | I guess |
| 13:45.54 | ccube | ok, thanks a lot |
| 13:45.55 | ccube | ill try |
| 13:46.14 | ccube | :) |
| 13:47.47 | johngay | Anyone play with Android since the sources were released? |
| 13:49.09 | *** join/#openmoko Hire1 (n=hire@host131-236-dynamic.33-79-r.retail.telecomitalia.it) |
| 13:50.36 | *** join/#openmoko max_posedon (n=max_pose@80.249.94.44) |
| 13:51.50 | sicu | johngay: check http://onlinedev.blogspot.com/2008/10/phase-one-of-porting-android-done.html and ML |
| 13:54.19 | *** join/#openmoko Blankoworld (n=Blankowo@portedesetoiles.homelinux.com) |
| 13:54.20 | ccube | it just booted!! :) |
| 13:54.44 | sicu | ccube: =] |
| 13:55.47 | johngay | Cool! Glad to see progress so quickly! |
| 13:58.07 | *** join/#openmoko cnwdup (n=harlekin@hnvr-4dbd7f9c.pool.einsundeins.de) |
| 14:01.49 | *** join/#openmoko poetic (n=isak@dhcp-47-203.nomad.chalmers.se) |
| 14:02.33 | johngay | I had a slight fear that because it was from Google, there might be some resistance. Glad to see this community is above such pettyness (-; |
| 14:03.12 | leinir | Community is too big to be made up only of zealots :) |
| 14:04.41 | *** join/#openmoko Isajha (n=Isajha4@wrzb-4d00cfd9.pool.mediaWays.net) |
| 14:06.00 | lindi- | i'm still bit sceptical on if it really is free software |
| 14:06.12 | *** join/#openmoko Isajha (n=Isajha4@wrzb-4d00cfd9.pool.mediaWays.net) |
| 14:07.41 | mwester | is eager to see his phone work properly, and world hunger abolished. |
| 14:08.36 | johngay | Hey mwester! I finally got around to flashing your kernel, modules and gtk fixes on my phone yesterday. I |
| 14:08.44 | leinir | is with mwester on those two ;) |
| 14:09.04 | mwester | was being sarcastic ;) |
| 14:09.08 | johngay | 'm hoping to notice battery life-time improvements. |
| 14:09.41 | mwester | I doubt you'll see that, other than perhaps as side-effects from slightly more stability ;) |
| 14:10.11 | johngay | Well, a little is better than nothing. |
| 14:10.27 | mwester | True enough. |
| 14:10.39 | johngay | I still haven't found anything I like better than 2007.2 ATM. |
| 14:12.02 | Dave | Me neither :) |
| 14:12.59 | *** join/#openmoko wakingrufus (n=rufus@c-98-228-181-211.hsd1.il.comcast.net) |
| 14:13.31 | johngay | Alltough I am interested in trying qtExt. But I'm not willing to flash over my working set-up. |
| 14:13.39 | Dave | sicu! |
| 14:13.57 | Dave | leinir :) |
| 14:14.09 | leinir | curtsies to Dave :) |
| 14:14.38 | leinir | QtExt works rather nicely - glitchy in places, sure, but the functionality is solid :) |
| 14:15.20 | johngay | And if I could get a rootfs tarball to test on SD, I'd give it a trial. |
| 14:15.53 | *** join/#openmoko DerHorst (n=Horst@e176104217.adsl.alicedsl.de) |
| 14:16.00 | *** join/#openmoko kirun (n=kirun@207.88.125.91.rb4.adsl.brightview.com) |
| 14:16.03 | Dave | :D |
| 14:17.11 | *** join/#openmoko rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 14:17.24 | johngay | However, ljp says I should wait till the next update and ljp's the expert when it comes to QT around here (-; |
| 14:17.52 | *** join/#openmoko unlotto (n=unlotto@ip114.rev112.brygge.net) |
| 14:18.06 | leinir | Not so sure about that, i think he'd likely know more about Qt than QT ;) |
| 14:18.55 | Dave | leinir is qt ;) |
| 14:19.09 | leinir | uses it, and is happy that way ;) |
| 14:19.18 | Dave | sure thing, QT |
| 14:19.35 | cjb_ie | why not qT ... just to get all the variants in |
| 14:19.51 | Dave | cjb :p |
| 14:20.08 | *** join/#openmoko der-lehmann (n=stefan@86.56.82.74) |
| 14:20.18 | johngay | As I said, I'd like to try it, but not enough to flash over the set-up I'm happy with. |
| 14:20.27 | Dave | Whee, time to make jack-o-lanterns! |
| 14:20.59 | CIA-49 | openmoko: 03john_lee * r4729 10/trunk/src/target/themes/illume-theme-asu/ (3 files in 2 dirs): |
| 14:21.00 | CIA-49 | openmoko: update illume-theme-asu to match upstream changes. big thanks to |
| 14:21.00 | CIA-49 | openmoko: raster. |
| 14:21.21 | Dave | :D |
| 14:21.25 | Dave | go go rasterman |
| 14:22.55 | lindi- | has anyone experience on removing invisible shield in order to remove some dirt under it? |
| 14:24.18 | raster | points at john lee |
| 14:24.20 | raster | he did it |
| 14:24.28 | raster | me - i'm busy on e17 stuffsors |
| 14:24.50 | *** join/#openmoko ipa (n=Administ@219-81-229-181.dynamic.tfn.net.tw) |
| 14:25.11 | raster | busy adding in pages to the first run wiz |
| 14:25.56 | CIA-49 | openmoko: 03john_lee * r4730 10/trunk/src/target/themes/illume-theme-asu/misc-data/asu/build.sh: hmm not necessary to touch build.sh. revert it. |
| 14:31.35 | *** join/#openmoko norro (n=norro@e181116129.adsl.alicedsl.de) |
| 14:34.14 | *** join/#openmoko XXgismXX (n=GISM@p5B09F03B.dip.t-dialin.net) |
| 14:39.35 | CIA-49 | openmoko: 03john_lee 07org.openmoko.dev * re0239578acda 10/packages/ (2 files in 2 dirs): add illume-theme-illume (from raster) |
| 14:39.35 | CIA-49 | openmoko: 03john_lee 07org.openmoko.dev * r71109c25eca7 10/packages/e17/e-wm_svn.bb: e-wm: fix merge error |
| 14:39.35 | CIA-49 | openmoko: 03john_lee 07org.openmoko.dev * r23b56fb6dd0e 10/packages/e17/illume-theme-illume_svn.bb: illume-theme-illume: update PV to match the om format |
| 14:39.36 | CIA-49 | openmoko: 03john_lee 07org.openmoko.dev * r26f1c7148a9c 10/packages/ (3 files in 3 dirs): illume-config: this package should not exist anymore. |
| 14:39.39 | CIA-49 | openmoko: 03john_lee 07org.openmoko.dev * r6e18b2b89d16 10/packages/e17/illume_svn.bb: illume: add illume-config-illume, but not illume-config-asu. Planning |
| 14:39.42 | CIA-49 | openmoko: 03john_lee 07org.openmoko.dev * r12cebcb435f3 10/packages/openmoko-projects/illume-theme-asu_svn.bb: illume-theme-asu: add correct DEPENDS |
| 14:39.45 | CIA-49 | openmoko: 03john_lee 07org.openmoko.dev * r68fdd1bd1fbb 10/conf/distro/include/sane-srcrevs.inc: illume-theme-asu: update srcrev to use the latest. |
| 14:39.55 | *** join/#openmoko Amorphous (i=jan@unaffiliated/amorphous) |
| 14:45.45 | q0b | quit |
| 14:45.49 | q0b | ups.. sorry.. ;))) |
| 14:46.11 | sigius | Why are these updates (by CIA-49) send to openmoko and not to openmoko-cdevel ? |
| 14:47.47 | *** join/#openmoko molkko (n=username@a91-156-63-86.elisa-laajakaista.fi) |
| 14:48.07 | *** join/#openmoko anno^da_ (n=anno^da@p5B07DB95.dip.t-dialin.net) |
| 14:48.13 | mwester | Because openmoko owns those. |
| 14:48.44 | lindi- | sigius: they are sent to both? |
| 14:48.47 | *** join/#openmoko Ainulind1le (n=ainu@calaquendi.org) |
| 14:49.05 | mwester | FSO are sent to both; AFAIK openmoko only sends here. |
| 14:50.02 | *** join/#openmoko slchen (n=slchen@122-116-241-177.HINET-IP.hinet.net) |
| 14:50.13 | sigius | yes, that looks about right (looking at irc history) |
| 14:54.28 | *** join/#openmoko christooss (n=matic@BSN-95-203-173.dial-up.dsl.siol.net) |
| 14:56.28 | *** join/#openmoko apol (n=apol@88.87.212.210) |
| 14:59.53 | *** join/#openmoko Isajha (n=Isajha4@wrzb-4d00cfd9.pool.mediaWays.net) |
| 15:04.28 | *** join/#openmoko Flyser_ (n=flyser@dialin-145-254-180-157.pools.arcor-ip.net) |
| 15:04.48 | *** join/#openmoko lindi- (n=lindi@kulho150.adsl.netsonic.fi) |
| 15:05.35 | *** join/#openmoko mlpug (n=username@a91-156-63-86.elisa-laajakaista.fi) |
| 15:07.47 | *** join/#openmoko lool (i=lool@debian/developer/lool) |
| 15:11.48 | *** join/#openmoko alfatangoxt (n=michele@host194-52-dynamic.36-79-r.retail.telecomitalia.it) |
| 15:18.29 | *** join/#openmoko spydon (n=spydon@90-227-33-55-no42.tbcn.telia.com) |
| 15:19.17 | *** join/#openmoko data|2 (n=datachao@189.27.191.132.adsl.gvt.net.br) |
| 15:22.36 | *** join/#openmoko BlackBsd (n=brian@72.168.193.117) |
| 15:26.31 | *** join/#openmoko Zorkman (i=Zorkman@dD57719B4.access.telenet.be) |
| 15:31.55 | *** join/#openmoko mlpug (n=username@a91-156-63-86.elisa-laajakaista.fi) |
| 15:31.55 | *** join/#openmoko XXgismXX (n=GISM@p5B09F03B.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 15:31.56 | *** join/#openmoko der-lehmann (n=stefan@86.56.82.74) [NETSPLIT VICTIM] |
| 15:31.56 | *** join/#openmoko icman (n=icman@123-240-172-254.cctv.dynamic.lsc.net.tw) [NETSPLIT VICTIM] |
| 15:31.56 | *** join/#openmoko Dominus (i=unices@ip5652ade4.speed.planet.nl) [NETSPLIT VICTIM] |
| 15:31.56 | *** join/#openmoko cdrum (n=cdrum@123.121.215.32) [NETSPLIT VICTIM] |
| 15:31.56 | *** join/#openmoko Obri (i=daniel@sonne.alt-f4.ch) [NETSPLIT VICTIM] |
| 15:31.56 | *** join/#openmoko exastra (n=go@75.148.80.90) |
| 15:32.23 | *** part/#openmoko piksi (n=piksi@vipunen.hut.fi) |
| 15:34.48 | *** join/#openmoko Staticwave_Ace (n=Ace@d57-135-60.home.cgocable.net) |
| 15:37.29 | *** join/#openmoko Ainulindale (n=ainu@calaquendi.org) |
| 15:42.31 | CIA-49 | openmoko: 03john_lee * r4731 10/trunk/src/target/themes/illume-theme-asu/misc-data/asu/freerunner.edc: |
| 15:42.31 | CIA-49 | openmoko: It's okay to leave the MOD: ILLUME CFG part there. It won't show up |
| 15:42.31 | CIA-49 | openmoko: unless user enabled the gadget. |
| 15:45.06 | Dave | oh snaps! |
| 15:49.30 | freelock | hey there... |
| 15:49.46 | freelock | anybody know if a debug version for a freerunner works with a neo? |
| 15:49.58 | freelock | debug board I mean |
| 15:53.15 | *** join/#openmoko Fiyuri (n=Alex@89.244.118.99) |
| 15:53.27 | Fiyuri | http://www.clanplanet.de/_sites/index.asp?rn=&clanid=10972 |
| 15:53.33 | *** part/#openmoko Fiyuri (n=Alex@89.244.118.99) |
| 15:53.39 | Infoport | freelock I'm pretty sure that the debug board is good for both gta01 and gta02 (as well as the Nokia N770 and the N810, and probably other stuff too) |
| 15:53.53 | freelock | great, thanks |
| 15:55.00 | Infoport | freelock I have the gta02, but I'm positive that the debug board is compatible with all, and have just been updated over time to be better and better |
| 15:55.43 | *** join/#openmoko hiciu (n=hiciu@host-91-200-27-218.leon.com.pl) |
| 15:56.03 | freelock | I have a new employee who has a freerunner and debug board, so this is great news... means I can get more adventurous with u-boot stuff and he can bail me out! |
| 15:57.05 | Infoport | freelock I havent gotten a lot of use out of my board-- set it up, started to use it once, but with FR it really isnt needed unless you plan on doing some serious low-level debugging, or *really* want to change the NOR u-boot (which I might tweak sometime in the future) |
| 15:57.56 | *** join/#openmoko Sup3rkiddo (n=sudharsh@unaffiliated/sudharsh) |
| 15:58.32 | Infoport | later folks! |
| 16:00.04 | lindi- | Infoport: is it too late to ask if you have managed to record audio? |
| 16:00.15 | lindi- | Infoport: here i just get kernel crash with arecord |
| 16:01.11 | *** join/#openmoko haakeyar (n=haakeyar@cB83A4BC1.dhcp.bluecom.no) |
| 16:03.12 | nemik | so for starting a new app to be distributed around, what would be the best SDK to use for this? QT? |
| 16:03.53 | nemik | i guess in that case it could be used both on the 2008.x firmwares and qtopia, right? |
| 16:04.28 | *** join/#openmoko Cervajz (n=Cervajz@r9ha50.net.upc.cz) |
| 16:04.33 | haakeyar | Just walked home here in rainy Norway, and even though I put my freerunner in my rainjacket pocket, it got really wet. When I got home, I immediately switched it off, unplugged the battery and wiped as much as possible of the water with toilet paper. |
| 16:04.54 | haakeyar | Any tips for what more I could do to make sure it stays alive? |
| 16:05.17 | haakeyar | Removing the front of the case maybe? |
| 16:05.20 | Sup3rkiddo | haakeyar, dry it...really well...(no...microwave doesnt work) |
| 16:05.21 | lindi- | haakeyar: if you have torx screwdriver i guess you could disassemble it more |
| 16:05.31 | *** join/#openmoko dougt (n=dougt@c-69-181-65-222.hsd1.ca.comcast.net) |
| 16:06.03 | *** join/#openmoko leinir (n=leinir@amarok/usability/leinir) |
| 16:07.27 | nemik | haakeyar: yes, disassemble more with torx and blow-dry gently (not too clase to components though) over a dry cloth. should be fine then |
| 16:08.14 | cjb_ie | i hear oven at 50 deg C is good for such things if you can't get them open |
| 16:09.12 | haakeyar | Ok, thanks. Hopefully I have a torx screwdriver lying around somewhere. |
| 16:10.14 | *** join/#openmoko Zoup (n=Zoup@91.98.73.252) |
| 16:12.28 | Zoup | anyone problem with eth0 to be not detected ? |
| 16:13.10 | *** join/#openmoko tedo (n=cta@HSI-KBW-091-089-240-030.hsi2.kabel-badenwuerttemberg.de) |
| 16:14.51 | *** part/#openmoko tedo (n=cta@HSI-KBW-091-089-240-030.hsi2.kabel-badenwuerttemberg.de) |
| 16:16.00 | nemik | so using 'opkg-target update' refers to Testing repo by default, but it gives me 404's. how do i change this to 2008.8 or something? |
| 16:20.21 | *** join/#openmoko evolux (n=evolux@e179205030.adsl.alicedsl.de) |
| 16:20.29 | *** join/#openmoko tedo (n=cta@HSI-KBW-091-089-240-030.hsi2.kabel-badenwuerttemberg.de) |
| 16:20.36 | *** part/#openmoko tedo (n=cta@HSI-KBW-091-089-240-030.hsi2.kabel-badenwuerttemberg.de) |
| 16:22.44 | *** join/#openmoko vinicius_ (n=vininim@189.26.200.113.adsl.gvt.net.br) |
| 16:25.36 | evolux | i would like to write an application that does a live spectral analysis of data (for example) from the microphone and displays it on screen. is sdl a good choice (stable enough) for the graphics part? |
| 16:25.58 | haakeyar | I didn't find any fitting screwdrives. I found several with the right shape (called torx?), but all were too big. I managed to unscrew one of the screws with a different screwdriver, but the other one is stuck and I don't want to use too much force with a screwdriver that doesn't fit properly. |
| 16:26.28 | *** join/#openmoko tedo (n=cta@HSI-KBW-091-089-240-030.hsi2.kabel-badenwuerttemberg.de) |
| 16:26.30 | haakeyar | So... Oven at 50 deg c, as cjb_ie said. Is that a good idea? |
| 16:26.38 | *** part/#openmoko tedo (n=cta@HSI-KBW-091-089-240-030.hsi2.kabel-badenwuerttemberg.de) |
| 16:28.40 | *** join/#openmoko hobitti (n=hobitti@a91-153-181-63.elisa-laajakaista.fi) |
| 16:29.09 | nemik | haakeyar: with so much plastic...i'm not sure i'd do that |
| 16:30.54 | *** join/#openmoko CVirus (n=Satan@41.196.144.188) |
| 16:34.35 | *** join/#openmoko CVirus (n=Satan@41.196.144.188) |
| 16:40.22 | *** join/#openmoko fifafrazer (n=as@3e6b01fb.rev.stofanet.dk) |
| 16:42.38 | *** join/#openmoko nullpuppy (n=dustin@c-24-16-88-20.hsd1.wa.comcast.net) |
| 16:43.09 | *** join/#openmoko alex-weej (n=alex@host86-151-121-212.range86-151.btcentralplus.com) |
| 16:43.12 | *** join/#openmoko ptitjes (n=didier@93.2.7.240) |
| 16:43.21 | *** part/#openmoko ptitjes (n=didier@93.2.7.240) |
| 16:44.54 | *** join/#openmoko valos[fr] (n=valos@mar92-6-82-227-150-198.fbx.proxad.net) |
| 16:45.01 | *** join/#openmoko Staticwave_Ace (n=Ace@d57-135-60.home.cgocable.net) [NETSPLIT VICTIM] |
| 16:45.01 | *** join/#openmoko mlpug (n=username@a91-156-63-86.elisa-laajakaista.fi) |
| 16:45.01 | *** join/#openmoko XXgismXX (n=GISM@p5B09F03B.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 16:45.01 | *** join/#openmoko der-lehmann (n=stefan@86.56.82.74) [NETSPLIT VICTIM] |
| 16:45.02 | *** join/#openmoko icman (n=icman@123-240-172-254.cctv.dynamic.lsc.net.tw) [NETSPLIT VICTIM] |
| 16:45.02 | *** join/#openmoko Dominus (i=unices@ip5652ade4.speed.planet.nl) [NETSPLIT VICTIM] |
| 16:45.02 | *** join/#openmoko cdrum (n=cdrum@123.121.215.32) [NETSPLIT VICTIM] |
| 16:45.02 | *** join/#openmoko Obri (i=daniel@sonne.alt-f4.ch) [NETSPLIT VICTIM] |
| 16:45.02 | *** join/#openmoko exastra (n=go@75.148.80.90) |
| 16:45.09 | *** part/#openmoko der-lehmann (n=stefan@86.56.82.74) |
| 16:46.41 | *** join/#openmoko samgee (n=samgee@187.88-200-80.adsl-dyn.isp.belgacom.be) |
| 16:48.00 | *** join/#openmoko mlpug (n=username@a91-156-63-86.elisa-laajakaista.fi) |
| 16:49.18 | lindi- | DocScrutinizer2: '#openmoko.10-06.log:03:12 < DocScrutinizer> sure, set up arecord to record from ADC, and here you go' |
| 16:49.52 | *** join/#openmoko jas4711 (n=jas@c80-216-18-41.bredband.comhem.se) |
| 16:50.02 | lindi- | DocScrutinizer2: does this mean you are not affected by http://docs.openmoko.org/trac/ticket/2073? |
| 16:56.39 | leinir | Right, time for everybody to air their opinion on the whole touchscreen vs/plus qwerty situation :) |
| 16:59.19 | *** join/#openmoko der-lehmann (n=stefan@86.56.82.74) |
| 17:01.36 | *** join/#openmoko morricone (n=foobar@dslb-092-074-199-006.pools.arcor-ip.net) |
| 17:04.32 | *** join/#openmoko milos_ (n=mikici@92.36.150.62) |
| 17:04.50 | *** join/#openmoko ccube (n=ccube@ssh.ccube.de) |
| 17:04.56 | d-b | touchscreen + usb keyboard ftw |
| 17:06.57 | leinir | touchscreen + slider keyboard ftw, where ftw means "good, except that it means mechanical parts, something which historically has proven itself breakage-prone" ;) |
| 17:08.09 | *** join/#openmoko Schugy (n=chris@Q1bb2.q.pppool.de) |
| 17:10.07 | leinir | which is why i voted 3 - smaller hvga touchscreen (i.e. same DPI, slightly smaller screen), plus hardware thumbfriendly qwertykeyboard ftw ;) |
| 17:10.21 | *** join/#openmoko tomboy64 (n=tomboy64@e178062082.adsl.alicedsl.de) |
| 17:13.00 | SpeedEvil | Fuller face screen then the iphone, with SAW display with diamond coated front. |
| 17:14.19 | d-b | SpeedEvil: oh yeah baby. |
| 17:15.14 | Dave | :o |
| 17:15.28 | Zorkman | Davidov! |
| 17:15.33 | Dave | o.O |
| 17:15.37 | Zorkman | how your prehistoric 2007.2 feeling today? :) |
| 17:15.50 | Dave | Pretty fucking superior. |
| 17:15.59 | leinir | Yes, a SAW display would absolutely rock :) |
| 17:16.03 | *** join/#openmoko noaXess (n=noaXess@32-161.63-81.stat.fixnetdata.ch) |
| 17:16.17 | Dave | saws leinir |
| 17:16.46 | leinir | bleeds and stuff! |
| 17:16.49 | nemik | so why does the sample app in the toolchain have pango dependencies pointing to "/home/build/..." ? damn this is frustrating |
| 17:16.54 | Dave | :D |
| 17:16.55 | leinir | Life on the bleeding edge... ;) |
| 17:17.01 | Dave | DEBIAN |
| 17:17.15 | SpeedEvil | SLACKWARE |
| 17:17.37 | d-b | der-lehmann: |
| 17:17.42 | d-b | i meant debian |
| 17:17.49 | d-b | ~apt |
| 17:17.49 | apt | apt is probably not as cool as jbot |
| 17:18.03 | SpeedEvil | ~jbot |
| 17:18.04 | apt | jbot is probably a hack!, or known to have only said one useful thing. a tool, or dating the fembots, or [TK]D-Fender's b*tch, or suck, or a pain in the ass |
| 17:18.38 | der-lehmann | d-b: yes? |
| 17:18.58 | d-b | didn't mean to call your name i hit tab. sorry. |
| 17:19.10 | SpeedEvil | http://www.falstad.com/circuits/transistors/oscillators/colpitts/ 404 |
| 17:19.13 | SpeedEvil | oops |
| 17:19.26 | der-lehmann | no problem |
| 17:20.10 | *** join/#openmoko BlackBsd (n=brian@72.168.193.117) |
| 17:30.21 | *** join/#openmoko RedFlash (n=RedFlash@host1-107-dynamic.25-79-r.retail.telecomitalia.it) |
| 17:30.45 | *** join/#openmoko nomeata (i=nobody@nomeata.de) |
| 17:30.53 | *** join/#openmoko centaur5 (n=fishman@209-33-197-88.dsl.infowest.net) |
| 17:32.12 | *** part/#openmoko der-lehmann (n=stefan@86.56.82.74) |
| 17:33.40 | *** join/#openmoko nicfer (n=chatzill@168.226.105.67) |
| 17:38.47 | nicfer | I think that calls should be a separate service than networks |
| 17:38.57 | *** join/#openmoko Hire1 (n=hire@host131-236-dynamic.33-79-r.retail.telecomitalia.it) |
| 17:40.14 | *** join/#openmoko Ainulindale (n=ainu@calaquendi.org) |
| 17:43.00 | nicfer | so you would be able to make calls no matter you use a wifi, gsm or 3G connection |
| 17:43.47 | nicfer | althrough telephony service providers would be against it |
| 17:44.44 | *** join/#openmoko hiciu (n=hiciu@host-91-200-27-218.leon.com.pl) |
| 17:48.32 | SpeedEvil | If your bill for calls goes down, your bill for data or rental goes up |
| 17:48.48 | *** join/#openmoko Isajha (n=Isajha4@wrzb-4d00cfd9.pool.mediaWays.net) |
| 17:51.13 | *** join/#openmoko Isajha (n=Isajha4@wrzb-4d00cfd9.pool.mediaWays.net) |
| 17:51.26 | *** join/#openmoko t_s_o (n=tso@77.84-49-129.nextgentel.com) |
| 17:53.27 | *** part/#openmoko sicu_ (n=sicu@cm-84.208.99.25.getinternet.no) |
| 17:56.38 | *** join/#openmoko nikolajsheller (n=nikolaj@0608ds1-amb.0.fullrate.dk) |
| 17:57.18 | *** join/#openmoko Ainulindale (n=ainu@calaquendi.org) |
| 17:58.24 | *** join/#openmoko hklein_ (n=hklein@i59F73F6C.versanet.de) |
| 17:58.26 | CIA-49 | freesmartphone.org: 03sudharsh 07openmoko-gsoc2008 * re1837a5a8ec8 10/fsod/src/subsystems/Python/fsod-python-plugin.c: Add some error checking logic while loading python scripts |
| 17:58.26 | CIA-49 | freesmartphone.org: 03sudharsh 07openmoko-gsoc2008 * re36d300c62e7 10/fsod/src/subsystems/Python/fsod-python-plugin.h: Remove a unnecessary declaration |
| 18:02.59 | *** part/#openmoko wakingrufus (n=rufus@c-98-228-181-211.hsd1.il.comcast.net) |
| 18:04.30 | *** join/#openmoko Raigedas (n=OpenSour@hst-241-40.splius.lt) |
| 18:09.28 | *** join/#openmoko Cervajz (n=Cervajz@r9ha50.net.upc.cz) |
| 18:10.13 | *** part/#openmoko Hire1 (n=hire@host131-236-dynamic.33-79-r.retail.telecomitalia.it) |
| 18:16.22 | *** join/#openmoko Stroller (n=Stroller@213-152-39-89.dsl.eclipse.net.uk) |
| 18:22.45 | *** join/#openmoko two34 (n=erik@c83-251-40-108.bredband.comhem.se) |
| 18:22.55 | *** join/#openmoko pd (n=pd@154-goc-29.acn.waw.pl) |
| 18:22.58 | pd | hello |
| 18:23.54 | pd | what shall i do next with cu -l /dev/ttyACM0? i have OM prompt on screen but nothing happend after exec command |
| 18:25.42 | lindi- | pd: trying to talk to uboot? |
| 18:25.52 | pd | lindi-: yes |
| 18:26.30 | lindi- | pd: i use gnu screen with slowpaste 100 and picocom inside it |
| 18:27.22 | pd | lindi-: ok but i get freeze after exec command |
| 18:28.02 | lindi- | i'm trying to locate nandread instructions |
| 18:28.04 | *** join/#openmoko BenO (n=ben@82-69-120-120.dsl.in-addr.zen.co.uk) |
| 18:28.54 | *** join/#openmoko BenO (n=ben@82-69-120-120.dsl.in-addr.zen.co.uk) |
| 18:29.00 | lindi- | pd: i don't use any 'exec' command with my uboot |
| 18:29.25 | pd | lindi-: see output on http://paste-it.net/public/rb5e459/ |
| 18:31.16 | lindi- | exec is for executing uboot commands from memory? |
| 18:31.35 | pd | lindi-: exec is shortcut from execute :) |
| 18:31.43 | pd | this is not a uboot command |
| 18:32.13 | lindi- | oh |
| 18:32.31 | lindi- | what command is it then? |
| 18:32.51 | Dave | Hi Lindi :) |
| 18:33.23 | pd | lindi-: i have fixed my issue :) |
| 18:33.29 | lindi- | pd: what was it? |
| 18:33.43 | pd | just set console to usb now and before to serial :D |
| 18:36.54 | *** join/#openmoko mmu_man (n=revol@vaf26-2-82-244-111-82.fbx.proxad.net) |
| 18:43.36 | *** join/#openmoko Filip4BE (n=Filip@77.109.123.60) |
| 18:52.42 | *** join/#openmoko Kt_ (n=Kirsat@c-24-98-184-147.hsd1.ga.comcast.net) |
| 18:53.30 | *** part/#openmoko Kt_ (n=Kirsat@c-24-98-184-147.hsd1.ga.comcast.net) |
| 18:55.52 | *** join/#openmoko Ainulind1le (n=ainu@calaquendi.org) |
| 19:01.19 | *** join/#openmoko Morge (n=mt@062016213048.customer.alfanett.no) |
| 19:05.12 | *** join/#openmoko dskippy (n=dskippy@209-6-23-199.c3-0.smr-ubr1.sbo-smr.ma.cable.rcn.com) |
| 19:06.13 | *** join/#openmoko ssweeny (n=scott@pool-72-95-253-254.pitbpa.east.verizon.net) |
| 19:09.07 | Zorkman | where can i find a kernel where the modules for usb are still in? |
| 19:09.26 | Zorkman | i reflashed qt extended and used mwesters kernel, but i can't connect to it through usb |
| 19:10.23 | lindi- | Zorkman: just add it yourself? |
| 19:11.43 | Filip4BE | Zorkman: did you also download & install the modules from mwesters site ? |
| 19:11.57 | Zorkman | Filip4BE: that was the problem i didn't do it |
| 19:12.04 | *** join/#openmoko ccube (n=ccube@ssh.ccube.de) |
| 19:12.23 | Zorkman | don't feel much like reflashing today :) |
| 19:12.34 | mwester | What do you mean about usb modules? Which ones? |
| 19:13.15 | Zorkman | mwester: I don't know:) connecting through usb just doesn't work anymore, I should have downloaded your files from the site but I overlooked it |
| 19:13.57 | Zorkman | I thought it would be that g_ether stuff or whatever the name is and that I could just flash an older kernel that had all those things built in and not in modules |
| 19:14.00 | *** join/#openmoko Ainulindale (n=ainu@calaquendi.org) |
| 19:14.05 | mwester | If you mean to use networking over the usb port (i.e. ssh into the phone) those modules are built in to the kernel. |
| 19:14.32 | Dave | Hello Mister Wester :) |
| 19:14.32 | mwester | You'll have to look elsewhere for your trouble. :-o |
| 19:14.52 | Zorkman | yeah no problem |
| 19:14.59 | Zorkman | thanks for the kernel and the files anyway :) |
| 19:15.26 | mwester | What makes you think that there are modules missing, then? |
| 19:15.58 | mwester | is totally confused now |
| 19:16.27 | Filip4BE | Zorkman: have you already tried to unplug/replug usb ? |
| 19:16.38 | Zorkman | Filip4BE: yeah :) |
| 19:16.50 | mwester | Ok - what does dmesg say on your host? |
| 19:16.50 | *** join/#openmoko behdad (n=behdad@cmr-208-124-151-218.cr.net.cable.rogers.com) |
| 19:17.02 | *** join/#openmoko evolux (n=evolux@e179205030.adsl.alicedsl.de) |
| 19:17.07 | Zorkman | mwester: i appreciate your help, but really, it isn't worth your time and troubles |
| 19:17.13 | mwester | ? |
| 19:17.16 | Zorkman | i'm going to reflash |
| 19:17.18 | *** join/#openmoko bernt (n=bernt@dslb-084-061-123-244.pools.arcor-ip.net) |
| 19:17.23 | Zorkman | don't worry about it mwester :) |
| 19:17.38 | Zorkman | i made a mistake |
| 19:17.40 | mwester | Zorkman: g_ether is built into the kernel -- your problems have nothing to do with the kernel or the modules. |
| 19:17.47 | mwester | ok |
| 19:18.04 | evolux | can someone tell me the mixer settings to use the built-in microphone via /dev/dsp? |
| 19:18.09 | *** join/#openmoko datachaos (n=datachao@189.27.191.132.adsl.gvt.net.br) |
| 19:18.50 | lindi- | evolux: /dev/dsp is OSS |
| 19:18.58 | lindi- | evolux: use ALSA instead |
| 19:20.29 | *** join/#openmoko haakeyar (n=haakeyar@cB83A4BC1.dhcp.bluecom.no) |
| 19:20.43 | *** join/#openmoko Cervajz (n=Cervajz@r9ha50.net.upc.cz) |
| 19:20.46 | bernt | is there something for speech recognition? |
| 19:21.01 | lindi- | bernt: quite broad question? |
| 19:21.27 | bernt | software ... or so ;-) |
| 19:22.18 | nemik | anyone running quemu with the 20081025 build? |
| 19:22.58 | lindi- | bernt: sphinx maybe? |
| 19:23.18 | nemik | after telling it to boot, instead of kernel it just takes me back to boot menu. but the kernel and rootfs images seems to be correct |
| 19:23.28 | evolux | lindi-: i know, it's just for a quick hack |
| 19:24.46 | *** join/#openmoko twolife (i=twolife@omikron.twolife.org) |
| 19:25.01 | *** join/#openmoko mrmoku (n=mok@ppp-62-216-214-144.dynamic.mnet-online.de) |
| 19:25.16 | evolux | hey, it works! |
| 19:25.35 | Cervajz | Hi, do anybody have strange jerking when are you listing contact like me in Om2008.9? |
| 19:25.45 | evolux | the question is now, how to package this little hack... |
| 19:25.57 | *** join/#openmoko quickdev (n=quickdev@p5B05544C.dip.t-dialin.net) |
| 19:26.15 | Cervajz | (sorry for my english) |
| 19:35.01 | CIA-49 | openmoko: 03eldruin 07stable * r2b78a9413619 10/include/configs/smdk2440.h: uboot-fix-smdk2440-config.patch |
| 19:40.58 | *** join/#openmoko Clint (n=Clint@thumb.scru.org) |
| 19:41.18 | *** part/#openmoko Clint (n=Clint@thumb.scru.org) |
| 19:47.56 | *** join/#openmoko rmoravcik (n=rmoravci@ip-89-102-255-171.karneval.cz) |
| 19:53.02 | *** join/#openmoko Zorkman (n=Zorkman@dD57719B4.access.telenet.be) |
| 19:57.21 | *** join/#openmoko rooly (n=rooly@host-125-92.lalacap.clients.pavlovmedia.com) |
| 19:59.34 | *** join/#openmoko Varox (n=Varox@p4FD47B40.dip.t-dialin.net) |
| 20:03.30 | gurugentoo | are there any tricks to getting usb host mode working? I soldered my own cable and it's not seeing anything plugged in |
| 20:03.44 | SpeedEvil | gurugentoo: have you twiddled the toggle? |
| 20:04.06 | gurugentoo | echo'd host? yes |
| 20:04.20 | gurugentoo | if that's what you mean |
| 20:05.02 | gurugentoo | I get "-bash: echo: write error: Invalid argument" but dmesg shows "s3c2410: changing usb to host" so it looks like it was accepted |
| 20:06.23 | *** join/#openmoko vaiursch (n=erwin@80-218-127-23.dclient.hispeed.ch) |
| 20:09.04 | spydon | gurugentoo, have you tried those scripts? |
| 20:09.41 | mwester | gurugentoo: what command give you that error; sounds like something went very wrong there. |
| 20:10.07 | gurugentoo | echo "host" > /sys/devices/platform/s3c2410-ohci/usb_mode |
| 20:10.16 | *** join/#openmoko timur_ (n=timur@c-71-227-89-146.hsd1.mi.comcast.net) |
| 20:10.17 | gurugentoo | gives me |
| 20:10.21 | gurugentoo | -bash: echo: write error: Invalid argument |
| 20:10.32 | *** join/#openmoko erwin__ (n=erwin@80-218-127-23.dclient.hispeed.ch) |
| 20:10.44 | gurugentoo | this is on debian...if that changes anything |
| 20:10.56 | mwester | did you check your spaces (spaces on either side of "host" ) |
| 20:11.06 | timur_ | what would be a reason for moko not being able to connect to a server and my laptop connecting successfully? both are on the same network. the server is 141.212.111.124 and it's listening on port 4323 |
| 20:11.17 | timur_ | i can't even ping it on openmoko |
| 20:11.20 | gurugentoo | mwester: no spaces |
| 20:11.46 | SpeedEvil | timur_: you're connecting trough usb? |
| 20:11.53 | *** join/#openmoko daMaestro (n=jon@fedora/damaestro) |
| 20:11.55 | timur_ | SpeedEvil, no, wireless |
| 20:11.57 | *** join/#openmoko playya_ (n=playya@p579B8FF5.dip.t-dialin.net) |
| 20:11.59 | mwester | Try echo "host" >/sys/devices/platform/s3c2410-ohci/usb_mode (spaced exagerated for clarity) |
| 20:12.18 | timur_ | i sshed to the moko to run the commands |
| 20:12.21 | mwester | timur_: gateway |
| 20:12.32 | gurugentoo | mwester: same |
| 20:13.02 | mwester | gurugentoo: ok. very strange. |
| 20:13.12 | SpeedEvil | timur_: can you ping your wireless router? |
| 20:13.17 | SpeedEvil | oops |
| 20:13.21 | mwester | oops |
| 20:13.23 | mwester | :p |
| 20:13.47 | timur_ | haha... used to be able to... doh now that went down |
| 20:13.57 | gurugentoo | mwester: I'll try after a reboot? |
| 20:14.14 | mwester | gurugentoo: do you perhaps have something using that usb port in some other mode -- like perhaps you are ssh'd into it? |
| 20:14.34 | gurugentoo | mwester: no, using wireless |
| 20:14.38 | mwester | Ok |
| 20:14.42 | mwester | what kernel? |
| 20:14.46 | timur_ | ok, i'll get back to you guys in a few |
| 20:15.22 | gurugentoo | mwester: whichever debian installs by default, I can look... |
| 20:15.37 | *** join/#openmoko evolux (n=evolux@g229223175.adsl.alicedsl.de) |
| 20:16.52 | gurugentoo | mwester: http://downloads.openmoko.org/framework/milestone3/uImage-2.6.24+r5+gitr1+ca19d156400f817960efe0d14680324b2ea34171-r5-om-gta02.bin |
| 20:18.44 | timur_ | all right, never mind guys :) |
| 20:19.03 | *** join/#openmoko vinicius (n=vininim@189.26.197.199.adsl.gvt.net.br) |
| 20:20.09 | gurugentoo | mwester: ok it now works after a reboot, still with that error |
| 20:22.31 | *** join/#openmoko timur__ (n=timur@c-71-227-89-146.hsd1.mi.comcast.net) |
| 20:24.26 | *** join/#openmoko lysdexia (n=doug@adsl-75-16-224-64.dsl.kntpin.sbcglobal.net) |
| 20:24.36 | *** join/#openmoko Staticwave_Ace (n=Ace@d57-135-60.home.cgocable.net) |
| 20:24.40 | *** join/#openmoko timur__ (n=timur@c-71-227-89-146.hsd1.mi.comcast.net) |
| 20:24.56 | *** join/#openmoko malik1972 (n=malik197@e182057070.adsl.alicedsl.de) |
| 20:29.37 | *** join/#openmoko Kasjo_screen (n=kasjo@matrix.csk.pl) |
| 20:32.55 | *** join/#openmoko ccube__ (n=ccube@ssh.ccube.de) |
| 20:38.03 | *** join/#openmoko neolynx (n=u@32-123-204-62-pool.dsl.fcom.ch) |
| 20:38.43 | gurugentoo | how can I tell the backlight driver not to dim the screen when using a usb keyboard? |
| 20:39.00 | gurugentoo | or have keyboard events keep it awake |
| 20:42.21 | mwester | That would be a userspace thing, not the backlight driver. the solution would depend on whichever distro you are using. |
| 20:43.04 | gurugentoo | ah, it appears that killing zhone worked...I'll have to look into that |
| 20:43.19 | gurugentoo | not the solution I was looking for really |
| 20:43.24 | *** join/#openmoko Stroller (n=Stroller@213-152-39-89.dsl.eclipse.net.uk) |
| 20:45.19 | *** join/#openmoko nomeata (i=nobody@nomeata.de) |
| 20:45.37 | *** join/#openmoko tjikkun (n=tjikkun@195-240-122-237.ip.telfort.nl) |
| 20:46.03 | nomeata | Hi. Is Sebastian Ohl around here? |
| 20:47.25 | Zorkman | how do i issue AT commands on Qtopia? |
| 20:47.47 | Zorkman | i have The Bouncy Rubber Calypso bug |
| 20:48.59 | Zorkman | or is there somewhere a working image with the ATLEEP=2 in it? |
| 20:49.23 | Zorkman | AT% SLEEP=2 |
| 20:50.45 | lindi- | Zorkman: you need an image to send a command to gsm? |
| 20:51.58 | Zorkman | lindi-: no, but i can't find on the net how i can issue at commands in qtopia |
| 20:54.39 | *** join/#openmoko data|2 (n=datachao@189.27.191.132.adsl.gvt.net.br) |
| 20:56.24 | mwester | You can't :( |
| 20:56.35 | lindi- | Zorkman: get the source and find some other AT command from it? |
| 20:57.15 | *** join/#openmoko timur_ (n=timur@c-71-227-89-146.hsd1.mi.comcast.net) |
| 20:57.23 | Zorkman | lindi-: that is over my head :) I will have to wait... |
| 20:59.54 | *** join/#openmoko The (n=Tha_D0ct@fco.xs4all.nl) |
| 21:00.10 | The | Hey, anyone here using the SHR? |
| 21:00.59 | *** join/#openmoko [Rui] (n=Rui@a213-22-145-101.cpe.netcabo.pt) |
| 21:04.09 | *** join/#openmoko haakeyar (n=haakeyar@cB83A4BC1.dhcp.bluecom.no) |
| 21:04.41 | lindi- | Zorkman: grep -r AT .? |
| 21:07.29 | The | Hello? Anyone here using the SHR distro? |
| 21:08.59 | Zorkman | not me The |
| 21:09.45 | The | craps |
| 21:09.50 | The | i don't get a sim pin.. |
| 21:09.53 | The | dialog |
| 21:11.30 | *** join/#openmoko Hire1 (n=hire@host131-236-dynamic.33-79-r.retail.telecomitalia.it) |
| 21:11.48 | *** part/#openmoko Hire1 (n=hire@host131-236-dynamic.33-79-r.retail.telecomitalia.it) |
| 21:13.29 | *** join/#openmoko gwyo (n=lala@65-101-166-184.desm.qwest.net) |
| 21:15.04 | *** join/#openmoko Filip4BE (n=Filip@77.109.123.60) |
| 21:17.24 | *** join/#openmoko ptitjes (n=didier@93.2.7.240) |
| 21:17.42 | *** part/#openmoko ptitjes (n=didier@93.2.7.240) |
| 21:18.14 | *** join/#openmoko j_ack (n=rudi@dsbg-4db5fbce.pool.einsundeins.de) |
| 21:19.07 | *** join/#openmoko vaiursch (n=erwin@80-218-127-23.dclient.hispeed.ch) |
| 21:21.30 | *** join/#openmoko vaiursch (n=erwin@80-218-127-23.dclient.hispeed.ch) |
| 21:26.36 | *** part/#openmoko lysdexia (n=doug@adsl-75-16-224-64.dsl.kntpin.sbcglobal.net) |
| 21:34.15 | *** join/#openmoko swc|666 (n=swc|666@unaffiliated/swc666/x-4934821) |
| 21:37.30 | *** join/#openmoko Shrimpy_ (n=tony@24-241-53-115.static.gwnt.ga.charter.com) |
| 21:38.20 | Shrimpy_ | when i ssh into my phone it asks for the key password and i though there was not supposed to be a password. can anyone help thanks |
| 21:38.34 | The | it is blank |
| 21:38.36 | The | just press enter |
| 21:38.55 | Shrimpy_ | The: i have tired that but always seems to be failure |
| 21:39.00 | The | ok |
| 21:39.02 | The | weir |
| 21:39.03 | The | d |
| 21:39.16 | Shrimpy_ | any advise? |
| 21:39.16 | Dave | o.O |
| 21:39.16 | mwester | "key password" |
| 21:39.18 | Zorkman | Shrimpy_: you sure you're ssh'in to the right address? |
| 21:39.33 | Dave | Are we playing password right now? :D |
| 21:39.55 | Soulnoob | Shrimpy: you have set a password on you rsa key |
| 21:39.58 | Shrimpy_ | Zorkman: postive. i dobule check the ip address with "ifconfig" before ssh |
| 21:40.00 | Soulnoob | ? |
| 21:40.04 | Zorkman | root@192.168.0.202 |
| 21:40.12 | Zorkman | did you add the "root"? |
| 21:40.22 | zash | key? |
| 21:40.30 | Shrimpy_ | Zorkman: negative. let me try that. thanks |
| 21:40.35 | Zorkman | maybe you're trying to log in as Shrimpy_@192.168.0.202 |
| 21:41.12 | Shrimpy_ | Zorkman: thank you i'm stupid |
| 21:41.24 | zash | sounds like something that you would get if you mess with public keys |
| 21:41.37 | Zorkman | np, the noob power is high in me, I only thought about it because sometimes i also forget the "root" :) |
| 21:41.59 | Shrimpy_ | Zorkman: Well have a great night |
| 21:42.03 | Dave | opkg install mwester |
| 21:42.03 | Shrimpy_ | others take care! |
| 21:42.17 | Soulnoob | If you add a passphrase to your rsa key, you will need to enter it in order to use it. This is better than logging in via password, because it's done on your host. |
| 21:43.55 | Soulnoob | has just settled down after a exhausting moko field test. |
| 21:44.10 | *** join/#openmoko georgy_28 (n=georgy@217-117-42-7.teledisnet.be) |
| 21:44.14 | Soulnoob | (Biking in hard wind) |
| 21:44.38 | Soulnoob | I got my first wsod, too. :( |
| 21:47.13 | mmu_man | anyone working on the android port to freerunner ? |
| 21:47.26 | daMaestro | mmu_man, http://planet.openmoko.org/ |
| 21:47.36 | balrog-k2n | mmu_man: yes, sean mcneil |
| 21:47.50 | mmu_man | interesting |
| 21:48.11 | mmu_man | I'll be trying to port Haiku, could help I suppose |
| 21:49.13 | mmu_man | Thirdly all the hardware-specific code has to be replaced by function for calling the Neo FreeRunner hardware. Because the code in Android thinks he's talking to a HTC G1. |
| 21:49.22 | mmu_man | ugh, they don't have any HAL ?? |
| 21:49.25 | mmu_man | that's lame |
| 21:49.43 | mmu_man | I expected better from a team made from ex Be, Inc. engineers :D |
| 21:51.15 | *** join/#openmoko neldoreth (n=ascot@unixboard/users/neldoreth) |
| 21:53.58 | *** join/#openmoko anno^da_ (n=anno^da@p5B07DB95.dip.t-dialin.net) |
| 21:53.58 | *** join/#openmoko Octy92 (n=octy@unaffiliated/octy92) |
| 21:54.58 | *** join/#openmoko ayeuu (n=ayeuu@tss37-1-82-228-161-185.fbx.proxad.net) |
| 21:56.14 | balrog-k2n | ugh, this android post is FUD |
| 21:57.10 | mmu_man | ? |
| 21:57.17 | mmu_man | care to develop ? |
| 21:58.01 | balrog-k2n | well, there's nothing to do in porting the kernel to openmoko or the software to ARMv4 |
| 21:59.00 | mmu_man | there shouldn't be much asm code in it unless they are porting the asm generated from gcc I suppose :D |
| 21:59.04 | balrog-k2n | you just a apply the patches and your kernel is ready... you just compile android for armv4 and it's ready... same as when you want to run ASU or FSO |
| 21:59.27 | mmu_man | well maybe they have some asm optimized memcpy or other |
| 21:59.36 | mmu_man | or maybe it's for the JVM |
| 21:59.57 | mmu_man | AFAIK they have their own bastardized one |
| 22:00.09 | balrog-k2n | yes, but it's cross platform |
| 22:00.20 | *** join/#openmoko datachaos (n=datachao@189.27.191.132.adsl.gvt.net.br) |
| 22:00.20 | balrog-k2n | i'd rather assume the author of the post has no idea what he's talking about |
| 22:00.46 | mmu_man | eh |
| 22:01.38 | tomboy64 | ugh? |
| 22:01.54 | mmu_man | oh |
| 22:03.23 | mwester | balrog-k2n: Since I don't know to what you refer, I cannot comment specifically. But, I can state that there ARE very specific parts of the patches for Android that use ARM assembly, and DO require rewriting for OM. |
| 22:03.58 | balrog-k2n | mwester: you mean kernel patches? |
| 22:03.59 | mwester | And yes that's stupid, but I presume Android had deadlines and left that up to the community to fix, much like Om has left a whole lot for us to fix. |
| 22:04.01 | mwester | NO |
| 22:04.08 | mwester | User space stuff as well. |
| 22:04.36 | balrog-k2n | mwester: one thing i know is you can just take gcc, the kernel patches, follow the normal process and get android running on an x86 |
| 22:04.41 | *** join/#openmoko zash (n=zash@zash.se) |
| 22:04.46 | balrog-k2n | that's further from armv5 than armv4 |
| 22:05.34 | mwester | I presume you refer to the "goldfish" emulator? I don't think that's reprentative... |
| 22:05.41 | mwester | representative, even. |
| 22:05.52 | swetland | the generic android kernel drivers are quite portable. the userspace code does have some bits of arm assembly in it and some of those were written assuming v5t or later |
| 22:06.04 | balrog-k2n | mwester: goldfish is arm |
| 22:06.20 | mwester | But whatever. It matters not a whit, since Android on Om is not going to make a usable phone currently anyway. |
| 22:06.30 | balrog-k2n | i mean like running debian on x86 |
| 22:06.59 | balrog-k2n | you download the packages or you take an x86 toolchain, you take the source, compile it and voila, it runs |
| 22:07.54 | mwester | Well, I guess then the community will be delighted when you do so, and leave behind the several folks who are working on (among other things) unnecessarily translating ARM assembly. |
| 22:07.56 | mwester | :p |
| 22:08.07 | *** join/#openmoko kk (n=kk@213.144.156.157) |
| 22:08.14 | Soulnoob | :) |
| 22:08.39 | swetland | there's some good effort underway to sort out v4t support and generally clean up architecture specific support in the build |
| 22:08.40 | *** join/#openmoko mgregson (n=mgregson@76-10-128-253.dsl.teksavvy.com) |
| 22:08.42 | swetland | http://groups.google.com/group/android-porting/browse_thread/thread/5edf8d06370f0d7 |
| 22:09.18 | kk | help |
| 22:09.27 | swetland | I wouldn't be surprised if Ben doesn't have patches submitted soon, assuming nobody else gets there first (I've seen other v4t cleanup efforts underway as well) |
| 22:09.39 | *** join/#openmoko christooss (n=matic@BSN-95-203-173.dial-up.dsl.siol.net) |
| 22:11.13 | mmu_man | great, I'm too busy with Haiku anyway :D |
| 22:11.33 | *** join/#openmoko christooss (n=matic@BSN-95-203-173.dial-up.dsl.siol.net) |
| 22:13.34 | *** join/#openmoko haakeyar (n=haakeyar@cB83A4BC1.dhcp.bluecom.no) |
| 22:17.11 | mmu_man | Haiku would really look great on a runner I think... http://embedded.hug-nordic.org/ |
| 22:17.54 | *** join/#openmoko almien (n=almien@87-194-198-122.bethere.co.uk) |
| 22:18.02 | *** join/#openmoko Proton24 (n=proton@p57BA5B83.dip.t-dialin.net) |
| 22:21.00 | *** join/#openmoko mku` (n=mku@mail.pfadinepomuk.ch) |
| 22:21.12 | Dave | Hallo balrogkun |
| 22:21.44 | *** join/#openmoko ccube (n=ccube@ssh.ccube.de) |
| 22:22.20 | *** join/#openmoko Azalyn (n=junon@modemcable061.93-83-70.mc.videotron.ca) |
| 22:23.29 | *** join/#openmoko Azalyn (n=junon@modemcable061.93-83-70.mc.videotron.ca) |
| 22:23.38 | *** join/#openmoko mku` (n=mku@mail.pfadinepomuk.ch) |
| 22:23.58 | balrog-k2n | Dave, iHola! |
| 22:25.39 | *** join/#openmoko christooss (n=matic@BSN-95-203-173.dial-up.dsl.siol.net) |
| 22:29.48 | *** join/#openmoko mku (n=mku@mail.pfadinepomuk.ch) |
| 22:36.57 | *** join/#openmoko mku (n=mku@mail.pfadinepomuk.ch) |
| 22:37.30 | *** join/#openmoko FredFokan (n=fred@39-15.105-92.cust.bluewin.ch) |
| 22:37.40 | *** part/#openmoko FredFokan (n=fred@39-15.105-92.cust.bluewin.ch) |
| 22:47.05 | *** join/#openmoko Staticwave_Ace (n=Ace@d57-135-60.home.cgocable.net) |
| 22:52.28 | *** join/#openmoko jakubzalas (n=jakub@host-81-190-9-238.gdynia.mm.pl) |
| 22:54.51 | *** part/#openmoko jakubzalas (n=jakub@host-81-190-9-238.gdynia.mm.pl) |
| 22:56.53 | *** join/#openmoko haakeyar (n=haakeyar@cB83A4BC1.dhcp.bluecom.no) |
| 22:58.25 | pantsd_ | anyone know why the I might keep on getting auth timeouts with wpa_supplicant and WEP? |
| 23:01.10 | *** join/#openmoko slick666 (n=landon@cmr-208-124-151-218.cr.net.cable.rogers.com) |
| 23:01.34 | slick666 | hello openmoko channel |
| 23:01.55 | gurugentoo | slick666: hi |
| 23:01.57 | slick666 | I'm trying to build the qemu emulation on my machine and am looking for some help |
| 23:02.15 | gurugentoo | slick666: interesting...me too |
| 23:02.21 | slick666 | lol |
| 23:02.40 | slick666 | where are you stuck? |
| 23:03.08 | gurugentoo | well I'm trying to do it in gentoo, more reading about it at this point |
| 23:03.16 | slick666 | ah |
| 23:03.21 | slick666 | I'm working with Ubuntu |
| 23:03.37 | slick666 | I've followed the wiki but I'm getting an error that I can't seem to find online |
| 23:03.52 | *** join/#openmoko Schugy (n=chris@Q3bd3.q.pppool.de) |
| 23:04.55 | slick666 | well if no one's active right now I'm going to go get some food |
| 23:05.00 | slick666 | be back soon yall |
| 23:05.39 | *** join/#openmoko Shrimpy_ (n=tony@24-241-53-69.static.gwnt.ga.charter.com) |
| 23:08.43 | Shrimpy_ | hello, has the debian install script changed location. cause i get a : wget bad address |
| 23:10.11 | gurugentoo | dns/connection problem? |
| 23:10.45 | gurugentoo | does `wget google.com` work? |
| 23:10.58 | Zorkman | does browsing in pythm work??? |
| 23:11.15 | rooly | does anyone else lose 5 minutes on the clock even after resetting the time manually? |
| 23:11.26 | Zorkman | i'm using pythm from the latest FDOM but i can't change directories to locate my music |
| 23:11.52 | gurugentoo | rooly: works fine here |
| 23:12.05 | rooly | what's your provider |
| 23:12.47 | gurugentoo | rooly: I'm using debian if that's what you're asking |
| 23:12.55 | rooly | no |
| 23:13.01 | gurugentoo | time server? |
| 23:13.21 | rooly | you're not using the phone om so i'm pretty sure you can't help me |
| 23:13.26 | gurugentoo | k |
| 23:13.40 | rooly | *os |
| 23:14.19 | *** part/#openmoko twolife (i=twolife@omikron.twolife.org) |
| 23:24.47 | Dave | Greetings |
| 23:27.09 | Zorkman | meetings |
| 23:28.50 | *** join/#openmoko DerHorst (n=Horst@e176101057.adsl.alicedsl.de) |
| 23:34.54 | *** join/#openmoko FredFoka1 (n=fred@39-15.105-92.cust.bluewin.ch) |
| 23:35.03 | *** part/#openmoko FredFoka1 (n=fred@39-15.105-92.cust.bluewin.ch) |
| 23:36.13 | *** join/#openmoko FredFokan (n=fred@39-15.105-92.cust.bluewin.ch) |
| 23:36.20 | *** part/#openmoko FredFokan (n=fred@39-15.105-92.cust.bluewin.ch) |
| 23:41.11 | Zorkman | does anybody know who made http://scap.linuxtogo.org/files/a021c845b2f5bc5f98e3b6a78ad925f7.png ? |
| 23:41.14 | *** join/#openmoko Ainulindale (n=ainu@calaquendi.org) |
| 23:41.20 | Zorkman | or if it is available? |
| 23:45.00 | *** join/#openmoko daMaestro (n=jon@fedora/damaestro) |
| 23:52.08 | gurugentoo | Zorkman: ooo...pretty |
| 23:52.17 | Zorkman | indeed |
| 23:52.24 | Zorkman | but how to get our hands at it? :) |
| 23:52.49 | Dave | yeah |
| 23:54.37 | gurugentoo | any idea when it was taken? |
| 23:55.09 | gurugentoo | o wow midnight last night |
| 23:55.19 | gurugentoo | I want |
| 23:55.35 | Dave | recently |
| 23:55.35 | Dave | yeah |
| 23:56.10 | Dave | UGGH |
| 23:56.18 | Dave | Mwester - I cannot fucking stand this gsm modem anymore! |
| 23:56.36 | Dave | or the software to go with it. |
| 23:57.13 | *** join/#openmoko Ainulindale (n=ainu@calaquendi.org) |
| 23:57.43 | Zorkman | and the firmware :) |
| 23:59.51 | *** part/#openmoko Filip4BE (n=Filip@77.109.123.60) |
