| 00:18.57 | *** join/#openjtag lpeterson (~quassel@ims1065i.engr.ucdavis.edu) |
| 00:27.41 | *** join/#openjtag _julian_ (~quassel@hmbg-5f760dc2.pool.mediaWays.net) |
| 05:22.35 | *** join/#openjtag toi (~peter@vrt.nat.ibbt.be) |
| 08:16.26 | *** join/#openjtag fcadete (558bf9b1@gateway/web/freenode/ip.85.139.249.177) |
| 12:03.25 | svolpe | I have openocd working great in Linux. I can program both my processor flash (PXA270+P30 flash) and my PLD (Cool runner 2). However when I try to do the same in windows I can only program the processor successfully. |
| 12:03.51 | svolpe | The PLD acts like it programs and the xsvf returns a success but the PLD is not programmed correctly. |
| 12:04.18 | svolpe | Is there some issue with openocd 0.4 xsvf for windows but not for Linux? |
| 12:43.40 | wookey | svolpe: I've never tried openocd on window, but are you using the same versions? |
| 12:44.12 | wookey | I spent some time last year making pxa270+coolrunner2 CPLD programming work (around v4.0 release) |
| 12:45.26 | wookey | it should be fine since then... |
| 13:00.24 | svolpe | wookey: same version 0.4, xsvf works great in Linux with pxa270+Coolrunner2 but no go in windows. |
| 13:01.02 | svolpe | wookey: it acts like it works and says success but when I verify the PLD and do a diff it looks like it only partly programmed in windows. |
| 13:01.24 | svolpe | wookey: I use Linux 100% of the time but others I work with use windows so that is why I'm trying to get it working. |
| 13:07.19 | wookey | the main diff i think is in the USB drivers but I'd expect breakage there to give errors |
| 13:18.17 | svolpe | wookey: I think the USB drivers are working well as I can program and debug the PXA270 |
| 13:27.39 | svolpe | wookey: I will turn on debugging and see were xsvf quits on both systems since debug_level 3 has xsvf echoing out every command it runs. |
| 13:31.54 | *** join/#openjtag MarkusBec (znc@80.69.39.131) |
| 13:38.58 | svolpe | wookey: well I just confirmed that the OpenOCD windows xsvf is quiting a little over half way through the xsvf file and the Linux version parses the entire file. No error or warning messages though. |
| 13:45.11 | *** join/#openjtag roxfan (dunno@91.180.87.28) |
| 13:45.25 | wookey | I think you've found a bug :-) |
| 13:47.39 | svolpe | wookey: I think so. Well I guess I will need to actually compile openocd on windows so I can slueth it out. I hate doing dev work on windows, I wish the bug was on the Linux side at least it would be easier to track down ;-) |
| 13:58.51 | wookey | you could compile it with mingw for windows on linux - I assume that how the openOCD distro is done? |
| 14:01.08 | svolpe | wookey: sounds like a good idea. |
| 14:29.31 | *** join/#openjtag lool (~lool@orc.dooz.org) |
| 14:34.20 | *** join/#openjtag lool (~lool@debian/developer/lool) |
| 14:58.40 | *** join/#openjtag lool (~lool@orc.dooz.org) |
| 16:19.09 | *** join/#openjtag Weaselweb (~quassel@2001:6f8:9e4:123:21a:92ff:fe5a:1409) |
| 17:32.10 | *** join/#openjtag zeuschuy (~chatzilla@adsl-74-161-131-146.mia.bellsouth.net) |
| 17:32.15 | zeuschuy | HI guys |
| 17:33.42 | zeuschuy | I need some help with JTAG |
| 17:44.32 | *** join/#openjtag lool (~lool@debian/developer/lool) |
| 18:37.34 | *** join/#openjtag toi (~peter@94-226-63-5.access.telenet.be) |
| 20:55.15 | *** join/#openjtag flyhorse|linux (~flyhorse|@183.22.237.132) |
| 22:27.17 | *** join/#openjtag flyhorse|linux (~flyhorse|@183.22.237.132) |
| 23:51.44 | *** join/#openjtag lpeterson (~quassel@ims1065i.engr.ucdavis.edu) |