| 00:39.19 | wookey | zergos: yes there are people around |
| 01:32.52 | *** join/#openjtag steve|m (~steve@p4FD477AD.dip.t-dialin.net) |
| 06:06.22 | *** join/#openjtag Weaselweb (~quassel@2001:6f8:9e4:123:21a:92ff:fe5a:1409) |
| 09:07.44 | zergos | good morning |
| 10:51.10 | *** join/#openjtag purl (~purl@rikers.org) |
| 10:51.10 | *** topic/#openjtag is this is the place to discuss bootloaders and JTAG |
| 11:56.23 | zergos | is AT91SAM9261 supported by OPENOCD ? |
| 12:10.38 | Weaselweb | zergos: yes, at91, or to be more precise arm926-ejs, should be supported |
| 12:12.06 | Weaselweb | zergos: I didn't work with 9261 actually, but I got no problems with 9260, 9g20 and 9263, a correct config file assumed |
| 12:30.03 | zergos | Weaselweb, thank you for answer |
| 12:30.17 | zergos | right now i didnt arrive to make work |
| 12:30.30 | zergos | Weaselweb, i cannot probe |
| 12:31.02 | Weaselweb | zergos: reading ff? |
| 12:31.09 | zergos | unknown NAND flash device found, manufacturer id: 0x0a device id: 0x0a |
| 12:31.09 | zergos | probing failed for NAND flash device |
| 12:31.24 | Weaselweb | well, I never used NAND with openocd |
| 12:31.43 | Weaselweb | but make sure you enabled NAND chipselect and NAND controller setup |
| 12:32.08 | zergos | Weaselweb, for is first time with external ram and flash |
| 12:32.31 | zergos | Weaselweb, where this should be enabled ? |
| 12:35.43 | zergos | Weaselweb, sorry for stupid questions, but flash functions should work on external flash chip ? |
| 13:59.07 | zergos | Weaselweb, i took a look on boards you tested on, and all of them have ECC , but AT91SAM9261 not |
| 22:39.40 | *** join/#openjtag roxfan (dunno@91.180.91.72) |