| 02:50.38 | *** join/#openjtag _julian (~quassel@dslc-082-083-130-166.pools.arcor-ip.net) |
| 07:08.42 | *** join/#openjtag Weaselweb (~quassel@2001:6f8:9e4:123:21a:92ff:fe5a:1409) |
| 08:28.27 | *** join/#openjtag Weaselweb (~quassel@2001:6f8:9e4:123:21a:92ff:fe5a:1409) |
| 12:02.51 | *** join/#openjtag nslu2-log (~nslu2-log@limax.nslu2-linux.org) |
| 14:58.46 | *** join/#openjtag kartoch (~chatzilla@ALille-155-1-149-70.w83-198.abo.wanadoo.fr) |
| 14:59.06 | kartoch | hello |
| 14:59.14 | kartoch | 'im a beginner with openocd |
| 14:59.32 | kartoch | i'm trying to use a jtagkey-tiny with a at91eb40a clone from embest |
| 14:59.42 | kartoch | so i'm using the following script |
| 15:00.12 | kartoch | source [find /home/kartoch/works/embedded/tools/local-openocd/share/openocd/scripts/interface/jtagkey-tiny.cfg] |
| 15:00.13 | kartoch | telnet_port 4444 |
| 15:00.15 | kartoch | gdb_port 3333 |
| 15:00.16 | kartoch | source [find /home/kartoch/works/embedded/tools/local-openocd/share/openocd/scripts/board/at91eb40a.cfg] |
| 15:00.51 | kartoch | ./openocd -f ../../config-openocd/jtagkey-tiny_at91_eb40a-2.cfg |
| 15:00.52 | kartoch | Open On-Chip Debugger 0.4.0-rc1 (2010-02-05-16:32) |
| 15:00.54 | kartoch | For bug reports, read |
| 15:00.55 | kartoch | http://openocd.berlios.de/doc/doxygen/bugs.html |
| 15:00.57 | kartoch | srst_only srst_pulls_trst srst_gates_jtag srst_open_drain |
| 15:00.58 | kartoch | fast memory access is enabled |
| 15:01.00 | kartoch | dcc downloads are enabled |
| 15:01.02 | kartoch | 16000 kHz |
| 15:01.03 | kartoch | Launching httpd server on port 8888 |
| 15:01.05 | kartoch | Info : device: 4 "2232C" |
| 15:01.06 | kartoch | Info : deviceID: 67358712 |
| 15:01.08 | kartoch | Info : SerialNumber: T1SYDDJ8 A |
| 15:01.10 | kartoch | Info : Description: Amontec JTAGkey A |
| 15:01.11 | kartoch | Info : clock speed 6000 kHz |
| 15:01.13 | kartoch | Info : JTAG tap: at91eb40a.cpu tap/device found: 0x1f0f0f0f (mfg: 0x787, part: 0xf0f0, ver: 0x1) |
| 15:01.14 | kartoch | Info : Embedded ICE version 1 |
| 15:01.16 | kartoch | Info : at91eb40a.cpu: hardware has 2 breakpoints or watchpoints |
| 15:01.17 | kartoch | and... nothing |
| 15:01.19 | kartoch | i can't connect to my board |
| 15:01.23 | kartoch | when i use insight on localhost:3333 |
| 15:01.32 | kartoch | i've the following error messages from openocd: |
| 15:02.47 | kartoch | Warn : target not halted |
| 15:02.49 | kartoch | Warn : target at91eb40a.cpu is not halted |
| 15:02.51 | kartoch | Error: can't add breakpoint: target running |
| 15:02.52 | kartoch | Warn : target at91eb40a.cpu is not halted |
| 15:02.54 | kartoch | Error: can't add breakpoint: target running |
| 15:02.56 | kartoch | Warn : target at91eb40a.cpu is not halted |
| 15:02.58 | kartoch | Error: can't add breakpoint: target running |
| 15:03.00 | kartoch | Warn : target not halted |
| 15:03.01 | kartoch | how can i add stop the target ? |
| 15:03.02 | kartoch | (sorry for the flood) |
| 15:12.48 | kartoch | humm obviously the problem is than the script reset-init at the end of the file at91e40a.cfg is not called, i'm mean this one: |
| 15:12.51 | kartoch | $_TARGETNAME configure -event reset-init { |
| 15:12.53 | kartoch | puts "Running reset init script for AT91EB40A" |
| 15:12.55 | kartoch | # Reset script for AT91EB40a |
| 15:12.56 | kartoch | reg cpsr 0x000000D3 |
| 15:12.58 | kartoch | mww 0xFFE00020 0x1 |
| 15:12.59 | kartoch | mww 0xFFE00024 0x00000000 |
| 15:13.01 | kartoch | mww 0xFFE00000 0x01002539 |
| 15:13.02 | kartoch | mww 0xFFFFF124 0xFFFFFFFF |
| 15:13.04 | kartoch | mww 0xffff0010 0x100 |
| 15:13.05 | kartoch | mww 0xffff0034 0x100 |
| 15:13.07 | kartoch | } |
| 15:13.14 | kartoch | so i've to connect to a telnet console for the command "reset int" |
| 15:13.19 | kartoch | "reset init" |
| 15:13.34 | kartoch | is there any way to execute this script at the start of openocd ? |
| 15:45.25 | Weaselweb | kartoch: by looking into olimex_sam9_l9260.cfg you should consider the event reset-start |
| 17:21.28 | *** join/#openjtag toi (~toi@d54C2A96D.access.telenet.be) |
| 19:00.44 | *** join/#openjtag uwe_ (~uwe_@188.105.18.240) |
| 20:27.11 | *** join/#openjtag MarkusBec (znc@80.69.39.131) |
| 23:45.29 | *** join/#openjtag wookey (~wookey@stoneboat.aleph1.co.uk) |