| 00:01.14 | ka6sox | ulf not yet. |
| 00:01.19 | ka6sox | do you have them? |
| 00:01.46 | ulf_k_ | yes i have the cvs soure |
| 00:02.12 | ulf_k_ | libbrux/flash/amd.c |
| 00:03.35 | ka6sox | I'm asking about the pictures |
| 00:03.43 | ulf_k_ | oh too late, i see |
| 00:04.11 | ulf_k_ | yes: http://www.wlanhain.de/morewireless/hardware/ dwl-7000 |
| 00:38.18 | ulf_k_ | i have to go home its almost 3 in the morning |
| 02:16.48 | *** join/#openjtag rwhitby-away (n=rwhitby@nslu2-linux/rwhitby) |
| 03:37.16 | *** join/#openjtag vmaster_ (i=vmaster@p549B546C.dip.t-dialin.net) |
| 05:35.22 | *** join/#openjtag ep1220 (n=NN@gate.epatec.at) |
| 09:45.39 | *** join/#openjtag nslu2bot (n=supybot@netblock-66-159-209-6.dslextreme.com) |
| 09:57.02 | *** join/#openjtag nslu2bot` (n=supybot@netblock-66-159-209-6.dslextreme.com) |
| 10:05.08 | *** join/#openjtag nslu2bot (n=supybot@netblock-66-159-209-6.dslextreme.com) |
| 10:05.40 | *** join/#openjtag nslu2bot (n=supybot@netblock-66-159-209-6.dslextreme.com) |
| 10:07.40 | *** join/#openjtag nslu2bot (n=supybot@netblock-66-159-209-6.dslextreme.com) |
| 10:08.49 | *** join/#openjtag nslu2bot (n=supybot@netblock-66-159-209-6.dslextreme.com) |
| 10:09.57 | *** join/#openjtag nslu2bot (n=supybot@netblock-66-159-209-6.dslextreme.com) |
| 10:15.55 | *** join/#openjtag nslu2bot (n=supybot@netblock-66-159-209-6.dslextreme.com) |
| 10:18.08 | *** join/#openjtag nslu2bot (n=supybot@netblock-66-159-209-6.dslextreme.com) |
| 13:18.18 | *** join/#openjtag [g2] (n=g2@nslu2-linux/g2) |
| 14:38.04 | ep1220 | [g2]: ping |
| 14:41.09 | [g2] | ep1220, pong! |
| 14:41.15 | [g2] | hello |
| 14:41.26 | [g2] | what can I do for you ? |
| 14:41.31 | ep1220 | hi! was just searching the net and found |
| 14:41.50 | ep1220 | http://www.olimex.com/dev/ sells a parallel wiggler type JAT G for 20$ |
| 14:41.55 | ep1220 | JTAG .. |
| 14:43.21 | ep1220 | www.olimex.com/dev/arm-jtag.html |
| 14:43.50 | [g2] | that's nice I need the 14-pin connector |
| 14:45.06 | ep1220 | :-( |
| 14:45.26 | [g2] | digilentinc also sells adapters |
| 14:45.41 | [g2] | I think theirs are $12.95 |
| 14:45.56 | [g2] | but it's a 6 pin header |
| 14:46.07 | *** join/#openjtag ulf_k (n=ulf_kypk@u7-67.dsl.vianetworks.de) |
| 14:46.14 | ulf_k | hello again |
| 14:46.17 | [g2] | hello |
| 14:46.31 | ep1220 | with 6 pin you can not use the load mini-cache speed up |
| 14:46.35 | [g2] | now that I mention it, I need the 6 to 14 and 6 to 20 pin converters |
| 14:46.47 | ulf_k | i put some pictures on my website |
| 14:47.23 | ulf_k | here the link: http://www.wlanhain.de/morewireless/hardware dwl-7000 |
| 14:48.11 | [g2] | ulf_k Oh.. that's got a miniPCI wifi card in it ? |
| 14:48.25 | [g2] | and what's the processor / RAM |
| 14:48.32 | ulf_k | 2 cards |
| 14:48.41 | [g2] | 2 mini PCI cards ? |
| 14:48.46 | ulf_k | two atheros 5212 |
| 14:48.55 | [g2] | G ? |
| 14:49.03 | ulf_k | one is only a one is bg |
| 14:49.16 | ulf_k | but both are 5212 chip based |
| 14:49.16 | [g2] | what's the other ? |
| 14:50.52 | [g2] | I see the AMD 29LV3200 :) |
| 14:51.32 | ulf_k | do you see the lattice |
| 14:51.35 | [g2] | yes |
| 14:51.49 | [g2] | it that the JTAG header on the left of the Lattice ? |
| 14:51.49 | ulf_k | upper right corner there is the 8 ping jtag |
| 14:52.07 | ulf_k | upper left th 20 pin |
| 14:52.32 | ulf_k | i printed the 20 pin to attach my cable |
| 14:52.32 | [g2] | both JTAG ? |
| 14:52.44 | ulf_k | i dont know |
| 14:52.49 | ulf_k | i think so |
| 14:53.02 | [g2] | I see the upper right though |
| 14:53.16 | [g2] | it'd be simple enough to buzz the pins for connectivity |
| 14:53.33 | [g2] | J1 is the 20 pin |
| 14:53.40 | ulf_k | yes |
| 14:53.41 | [g2] | is J3 the 8 pin ? |
| 14:54.49 | ulf_k | yes and bottom right you have serial |
| 14:54.49 | [g2] | Umm and it's got a IXP420 on there not a IXP425 |
| 14:55.18 | [g2] | did you put those headers on or were they there ? |
| 14:55.51 | ulf_k | how you mean? |
| 14:56.15 | [g2] | Do you solder on the JTAG and serial headers ? |
| 14:56.48 | ep1220 | ulf_k: Hast du die Header eingelötet ? |
| 14:56.51 | ulf_k | the right headers are manf. soldered, i only put the 20 pin my myself |
| 14:57.20 | ulf_k | hey ep1220 du kommst aus deutschland? |
| 14:57.21 | [g2] | So the JTAG and serial were already there then |
| 14:57.31 | ep1220 | Österreich |
| 14:57.32 | ulf_k | yes |
| 14:57.38 | [g2] | excellent |
| 14:57.41 | ulf_k | servus |
| 14:57.48 | ep1220 | servus |
| 14:58.00 | [g2] | and you've connected to the processor via the JTAG but haven't been able to reflash |
| 14:58.01 | ep1220 | [g2]: sorry for the german "interruption" |
| 14:58.12 | vmaster | he's been able to flash parts of it |
| 14:58.23 | vmaster | but as the jtag-tools don't support the xxx320 version of the flash |
| 14:58.24 | [g2] | yeah the first 64K |
| 14:58.28 | vmaster | some parts didn't flash correctly |
| 14:59.01 | ulf_k | well read flash is somehow working but not writing |
| 14:59.18 | [g2] | it may not be fully working properly |
| 14:59.25 | vmaster | reading is the easy part |
| 14:59.29 | vmaster | you don't have to care about much |
| 14:59.45 | [g2] | actually you want to verify the read |
| 14:59.46 | vmaster | the flash comes up in array mode, you apply an address, you read the data |
| 15:00.20 | [g2] | vmaster what if he reading the chip in 8-bit mode and missing every other byte ? |
| 15:00.39 | vmaster | heh, yeah, that would be a bad thing :) |
| 15:00.47 | [g2] | hence the read and verify |
| 15:01.15 | [g2] | you *think* you've got it working and then you understand you don't have it *fully* working |
| 15:01.28 | [g2] | Having done things like that in the past :) |
| 15:02.02 | ulf_k | i read from 0x00000000 65536 size to a file and easy less this file, i fond a copyright and vxworks parts, so i think this i the flash content |
| 15:02.05 | [g2] | ulf_k what are the pin outs for the Serial and JTAG ? |
| 15:02.35 | [g2] | ulf_k that's a good thing |
| 15:03.01 | [g2] | stuff like consecutive text strings are a good indication that you really are reading it all properly |
| 15:03.10 | vmaster | ulf_k: when you use the jtag-tools to detect the flash, does it report the flash buswidth? x8 or x16? |
| 15:04.49 | ulf_k | g2: upper right 8 pin jtag is like the picture on hri sourceforge project jtag faq pin 5 is nc! |
| 15:05.03 | vmaster | that the lattice isp layout |
| 15:05.05 | vmaster | 's |
| 15:05.59 | ulf_k | g2: bottom right serial is: in nc minus 3,3v puls and out |
| 15:08.02 | ulf_k | right now i am at the office i will get the devices soon so i can grab that stuff and put it on the website, but what i remember, when i use the debian shipped jtag tools i habe only 16x when i use the compiled cvs source i have both |
| 15:08.50 | [g2] | ulf_k how much memory and flash is on the board ? |
| 15:09.22 | ulf_k | 4 flash 16 ram |
| 15:09.43 | ulf_k | brb |
| 15:09.44 | [g2] | THX |
| 15:20.29 | ulf_k | ok i put the jtag output on the website: http://www.wlanhain.de/morewireless/hardware/dwl-7000/ |
| 15:21.26 | [g2] | cool |
| 15:26.16 | ulf_k | ok and the reading writing results, are also now there before.hex and after.hex |
| 15:26.17 | ulf_k | before.hex is read from the flash |
| 15:26.27 | ulf_k | after.hex is after writing it back and reading it again |
| 15:26.32 | ulf_k | now in some parts only ffff are written! |
| 15:28.32 | ulf_k | can you reproduce what i mean? |
| 16:15.24 | *** join/#openjtag odoc (i=odoc@is.borntobooze.de) |
| 16:57.24 | *** join/#openjtag prpplague (n=billybob@72.22.130.108) |
| 17:11.32 | ka6sox | morning |
| 17:12.21 | prpplague | ka6sox: hola |
| 17:13.24 | ka6sox | hola prpplague long time no talk...hows things hanging? |
| 17:13.49 | prpplague | ka6sox: hehe, fine |
| 17:14.02 | prpplague | ka6sox: just been busy between hacking the juicebox and work |
| 17:14.33 | ka6sox | prpplague, cool...getting tired of Sunny and 85deg yet? |
| 17:14.46 | prpplague | ka6sox: actually yea |
| 17:14.51 | prpplague | ka6sox: kinda missing texas |
| 17:15.10 | ka6sox | prpplague, you missed out on Katrina though eh? |
| 17:16.01 | prpplague | ka6sox: yea, katrina didn't even come close to us |
| 17:16.54 | ka6sox | prpplague, I'd say from the sounds of it you are getting Island Fever! |
| 17:17.05 | prpplague | yea |
| 17:17.07 | prpplague | hehe |
| 17:17.22 | prpplague | after awhile going to beach gets old |
| 17:26.53 | ulf_k | hi ka6sox, i put some infos of my jtag output on my site, if you are interested in |
| 17:29.28 | prpplague | ulf_k: url? |
| 17:31.52 | ka6sox | ulf_k, yes I am..url? |
| 17:32.53 | ulf_k | oh sorry http://www.wlanhain.de/morewireless/hardware/dwl-7000/ |
| 17:33.54 | ka6sox | cooll...I'll look in just a bit..gotta run now! |
| 18:42.02 | *** join/#openjtag ulf_k_ (n=ulf_kypk@u7-67.dsl.vianetworks.de) |
| 19:32.09 | *** join/#openjtag [g2] (n=g2@nslu2-linux/g2) |
| 19:45.17 | prpplague | http://www.google.com/url?sa=t&ct=res&cd=7&url=http%3A//www.moto.com/tech/MO1003%2520Brief.pdf&ei=DokkQ8iwCLfGswG0sZiaAw |
| 19:51.02 | vmaster | nice |
| 20:44.54 | *** part/#openjtag odoc (i=odoc@is.borntobooze.de) |