| 01:20.40 | *** join/#openjtag Tiersten (~tman@Tiersten.nslu2-linux) |
| 02:21.23 | *** join/#openjtag [g2] (~g2@g2.nslu2-linux) |
| 07:53.11 | *** join/#openjtag nslu2-log (dyoung@dyoung.nslu2-linux) |
| 09:58.18 | *** join/#openjtag nslu2-log (dyoung@dyoung.nslu2-linux) |
| 11:15.36 | *** join/#openjtag odyoung-lgger (~dyoung-lo@cpe-66-91-65-38.hawaii.res.rr.com) |
| 12:49.20 | *** join/#openjtag [g2] (~g2@g2.nslu2-linux) |
| 14:16.17 | prpplague | [g2]: hey |
| 14:16.21 | prpplague | [g2]: you around? |
| 14:18.16 | [g2] | prpplague, hey yeah |
| 14:18.45 | prpplague | [g2]: http://www.dontronics.com/giga.html#io24 |
| 14:20.07 | [g2] | prpplague, Looks SWEET |
| 14:20.17 | [g2] | the ubicom is a rock'n little processor |
| 14:20.37 | [g2] | I've read a bunch about them over that last several years |
| 14:21.09 | [g2] | if it wasn't for the $10K dev setup I'd have had one a while ago |
| 14:21.53 | prpplague | [g2]: this board has spi on all the ports |
| 14:22.26 | prpplague | [g2]: thing this would be an interesting board to use for jtag? |
| 14:24.44 | [g2] | actually they uses the FTDI chips and the 2232C has the JTAG build in as an option |
| 14:25.14 | [g2] | so they could make the same usb-JTAG as ezniosusb except more general |
| 14:25.45 | prpplague | yea thats what i thought as well |
| 14:26.36 | [g2] | thx for pointing out the link |
| 14:29.42 | prpplague | [g2]: np the actual company that makes it is www.elexol.com |
| 14:30.17 | [g2] | like this one http://www.easyfpga.com/ |
| 14:31.45 | prpplague | oh nice |
| 14:31.53 | prpplague | it has the 2232 as well |
| 14:32.09 | [g2] | nod. it's good to go for the Altera |
| 14:32.18 | [g2] | the elexol board has ethernet on it |
| 14:32.51 | [g2] | the ubicom chips are really nice and would be TOTALLY cool to program |
| 14:49.54 | prpplague | [g2]: we use alot of the atmel chips, i wonder if icould get our atmel guy to do a board like that |
| 15:17.42 | [g2] | sooner or later will actually get some hw that can talk JTAG to our DUTs |
| 15:17.50 | [g2] | Device Under Test |
| 18:46.45 | *** join/#openjtag beewoolie-akf (~beewoolie@florence.buici.com) |
| 18:48.08 | beewoolie-akf | [g2]: Guess what arrived today... |
| 18:49.40 | beewoolie | What I want to know is why did they choose a pinout that is different, and incompatible, with the ARM pinout. |
| 19:00.10 | jacques | jtag cable ? |
| 19:00.13 | jacques | digilent? |
| 19:14.02 | beewoolie | Yep. |
| 19:14.37 | beewoolie | The pinout is different than the header I have. I'm working to make it match. |
| 19:17.33 | beewoolie | How do the diligent people expect us to use their cable? Is there normally an adapter? Are there some targets that use their pinout? |
| 19:21.26 | jacques | beats me, I had to make my own adaptor |
| 19:26.20 | beewoolie | jacques: For the diligent? Or did you fabricate the whole thing? |
| 19:27.45 | jacques | for the digilent. I just had some male header and soldered the wires from the slug to the correct pins, so I can plug the digilent cable into that |
| 19:28.35 | beewoolie | Ah. I soldered my header to be a standard ARM pinout. Now, I'm wondering how best to handle this. |
| 19:29.27 | jacques | just re-arrange the wires :-) |
| 19:30.25 | beewoolie | Then, I cannot go back to another adapter if I want to use the one I built. Part of this exercise is to determine if the board I built works properlt. |
| 20:19.03 | *** join/#openjtag ep1220 (~ep1220@gate.epatec.at) |
| 20:19.38 | ep1220 | [g2] the spartan board arrived in the late afternoon |
| 20:41.15 | *** part/#openjtag ep1220 (~ep1220@gate.epatec.at) |
| 20:49.31 | [g2] | beewoolie, hey! |
| 20:49.41 | beewoolie | [g2]: peep |
| 20:49.53 | [g2] | the S3 board has a header to match iirc |
| 20:50.05 | beewoolie | Got a diligent. Need to adapt my header to the pinout. |
| 20:50.44 | [g2] | I've tried for about 6 hours the other day to get the Avila to be happy with my other digilent cable and it was not :( |
| 20:50.52 | beewoolie | Hmm. |
| 20:51.08 | [g2] | the two VCC connections mentioned pull-ups so I don't know what the deal is |
| 20:51.23 | beewoolie | Is there some docs I should have? |
| 20:51.32 | beewoolie | As there are no pullups on the slug? |
| 20:51.42 | beewoolie | I thought that rwitby uses a diligent. |
| 20:51.46 | [g2] | Same PC that used a DOS floppy to reflash the Avila on the couldn't talk with the digilent cable |
| 20:51.57 | [g2] | no pullup on the SLUG |
| 20:52.13 | [g2] | jacques, used a digilent cable and dyoung too I think |
| 20:52.18 | [g2] | I know jacques did |
| 20:52.29 | jacques | yep, I used the digilent cable dyoung sent me :-D |
| 20:52.30 | beewoolie | Jaque says he wired a header for it. |
| 20:52.32 | [g2] | and that was to recover the one semi-bricked unit |
| 20:53.00 | beewoolie | I'm going to see if I have another header to solder up for this. |
| 20:53.50 | [g2] | it was pretty wierd because I'm pretty sure I had the lines all connected properly |
| 20:54.15 | [g2] | I accidently had the reset pin connect on first try and the unit was held in reset :) |
| 20:54.42 | [g2] | the board booted fine, but no JTAG happiness |
| 20:55.14 | beewoolie | openwince? |
| 20:55.56 | [g2] | nod |
| 20:56.59 | prpplague | beewoolie: hey d00d |
| 20:57.10 | beewoolie | yo. |
| 20:57.29 | prpplague | beewoolie: are you using rmk's amba-clcd stuff? |
| 20:57.29 | beewoolie | prpplague: [g2] sent me a diligent which I'm getting hooked up. |
| 20:57.37 | prpplague | beewoolie: lovely |
| 20:57.42 | beewoolie | We'll see if it jtag board is working. |
| 20:58.06 | beewoolie | prpplague: yeah. I use the amba-clcd. There is a patch he put out recently to help with some gray-scale modes. |
| 20:58.29 | beewoolie | 2.4 or 2.6? |
| 20:58.50 | prpplague | i'm using the 2.4 series right now |
| 20:58.59 | prpplague | testing with 2.4.17 and 2.4.30 |
| 20:59.04 | beewoolie | There is already a driver for the 2.4 kernel. Lineo did it. |
| 20:59.10 | prpplague | beewoolie: yea |
| 20:59.13 | prpplague | beewoolie: i've got that |
| 20:59.26 | beewoolie | Is there an incompatibility |
| 20:59.27 | prpplague | beewoolie: just gotta get the lcd specs in there and working |
| 20:59.54 | prpplague | beewoolie: mainly that i can't find an example of a gray scale working with pl110 |
| 21:00.13 | beewoolie | prpplague: That's the new stuff that rmk put on the list. |
| 21:00.33 | beewoolie | Someone has a monochrome display that we needed to get working with a palette. |
| 21:00.44 | beewoolie | There were some issues, but I haven't studied the patch. |
| 21:00.54 | beewoolie | Supposedly its working fine now. |
| 21:36.10 | *** join/#openjtag purl (ibot@apt.bot.TimRiker.active.supporter.pdpc) |
| 21:36.10 | *** topic/#openjtag is This is the place to discuss development of Open JTAG tools and Bootloaders |
| 21:36.11 | dyoung | The Digilent cable is a Xilinx DLC5 compatible cable and is pin compatible with most of the xilinx dev boards. And yes, there is an adapter to go from 6-pin xinlinx to 14(or was it 16) pin ARM. But its kinda pricy. |
| 22:01.54 | [g2] | dyoung, I did not get it to work yet with the 14 pin header on the Avila |
| 22:02.02 | [g2] | I made my own adapter |
| 22:28.01 | *** join/#openjtag dyoung-logger (~dyoung-lo@dyoung.nslu2-linux) |
| 22:30.09 | *** join/#openjtag nslu2-log (dyoung@dyoung.nslu2-linux) |