IRC log for #openezx on 20100630

00:56.16*** join/#openezx Angelox_123 (~root@201-13-206-172.dial-up.telesp.net.br)
01:40.30*** join/#openezx LoneStar (~xinzhen@218.80.193.59)
01:49.07*** join/#openezx lclaudio_ (~lclaudio@189.26.12.191.dynamic.adsl.gvt.net.br)
05:07.39*** join/#openezx ao2 (~ao2@cl-35.trn-01.it.sixxs.net)
07:13.08*** join/#openezx yang (yang@gnewsense.mtveurope.org)
07:45.07ao2Does anybody remember if E680 has an actual vibrator connected to VVIB regulator? WyrM?
08:17.59*** join/#openezx florian_kc (~fuchs@Maemo/community/contributor/florian)
08:29.20WyrMao2: No, it doesn't have a vibrator
08:29.49WyrMon e680 vibrator is just low frequency sound from the speakers.
08:30.07WyrMspeakers are quite big on e680 ;)
08:34.30ao2ok thanks, I am adding the vibrators to pcap_subdev, that's why I asked
08:40.41ao2ah WyrM after your pcap-regulator patch, should the contraints into ezx.c be adjusted as well?
08:52.00ao2[   35.418006] machine_constraints_voltage: override 'VVIB' max_uV, 3000000 -> 2000000
08:52.00ao2[   35.419125] regulator: VVIB: 1300 <--> 2000 mV at 1300 mV
08:52.17ao2so it's better to adjust them even if not strictly needed
09:04.20WyrMao2: yes, well spotted, thanks :)
09:08.06*** join/#openezx WyrM (~wyrm@unaffiliated/wyrm)
09:08.41*** join/#openezx Stefan_N (~root@vs1141105.vserver.de)
09:08.50Stefan_Nhihi
09:09.13Stefan_Ni was wondering , where did all the USB initialization go to  in ezx.c
09:09.38Stefan_Ni dont understand , because the defines USB_BUSCTRL_UP etc are never used anymore ?
09:16.14ao2Stefan_N, for gen2 phones eoc has its own driver now, for gen1 the EMU driver is non existent we just have a hack for it in ezx_pcap_init(). But I never touched these usb bits, so my answer may not be good enough enough.
09:16.56*** join/#openezx l403 (~l@85.132.159.231)
09:23.06*** join/#openezx mickey|w701 (~mickey@e180162184.adsl.alicedsl.de)
09:38.02Stefan_Nok when i want to reactivate usb host with some PUll-up  do you suggest handling it in ezx_pcap_init ?
09:39.41Stefan_Nok thanks, ill figure it out
09:44.29ao2an EMU driver would be ideal, but I'd be pretty useless there ATM.
09:48.27ao2mmh vibrator works on a780 but not on a1200...
10:06.55*** join/#openezx lclaudio_ (~lclaudio@201.22.54.193.dynamic.adsl.gvt.net.br)
10:22.02WyrMhum
10:22.05WyrMit should.
10:36.52*** join/#openezx mickeyl (~mickey@openmoko/coreteam/mickey)
11:02.17*** join/#openezx l403 (~l@85.132.159.231)
12:34.33*** join/#openezx l403 (~l@85.132.159.231)
12:47.36*** join/#openezx mickey|w701 (~mickey@e180162184.adsl.alicedsl.de)
13:06.42*** join/#openezx LoneStar (~xinzhen@114.92.174.106)
14:05.09ao2mmmh, the regulator framework does get the changed to VVIB, pcap registers are changed, but the actual vibration does not happen, and it works on original firmware. let me check AUXVREG_MASK...
14:05.23ao2s/changed/changes/
14:44.41*** join/#openezx Angelox_123 (~root@201-95-46-43.dsl.telesp.net.br)
14:44.55Angelox_123Hello All
14:53.09ao2hi Angelox_123
14:53.29Angelox_123Hello ao2....Whats is your real name?
14:53.44ao2Antonio, see ao2.it
14:55.15Angelox_123i watching it now......
14:55.22Angelox_123seeying
14:55.52Angelox_123You kernel on people.openezx.com work in the A1200?
14:55.58ao2Angelox_123, were you able to use the rootfs on flash with the openezx kernel?
14:56.22ao2Angelox_123, it does, yes, as long as you pass the correct machid
14:57.37Angelox_123ok....i tryied compile the openezx...but do not work the rootfs...you can show me a link to a rootfs that works on A1200??
14:57.43Angelox_123only for tests....
14:58.58ao2http://people.openezx.org/ao2/deploy/images/a780/fso2-console-image-a780.tar.gz
14:59.23ao2the openezx kernel expect the rootfs on the second partition of the flash card, remember that
14:59.34Angelox_123yes...it ext2 yeah??
14:59.45ao2yes
15:00.36Angelox_123hum.....i can use this kernel http://people.openezx.org/ao2/images/201006211307/zImage-201006211307 ? for a1200?
15:00.53Angelox_123the machid 1742
15:00.56Angelox_123?
15:01.07ao2yes, ot the one from http://people.openezx.org/ao2/deploy/images/a780/ they should be pretty much the same
15:01.15ao2s/ot/or/
15:02.15Angelox_123yes.....i understand
15:03.04Angelox_123its necessary use the modules?
15:03.32ao2for the GSM modem yes
15:03.47ao2if you don't need this for now, you can do without modules just fine
15:04.25ao2but for the wireless adapter they will be needed I guess
15:04.49Angelox_123Hum...ok...The kernel openezx can already make calls?
15:06.06ao2not audio calls yet, but we can dial numbers, see incoming calls, send/get SMSs
15:06.51ao2of course that's handled in userspace
15:07.10Angelox_123Wow........ You did a good job!
15:09.31Angelox_123Congraturations!
15:13.07Angelox_123i cannot boot with you kernel ao2...
15:13.17ao2what's the problem?
15:13.21Angelox_123Only show white screen....
15:13.44ao2how are you booting? via gen-blob? or moto-boot-usb?
15:13.53Angelox_123dual-boot
15:14.02ao2show me your menu.lst
15:14.21ao2use pastebin.com
15:14.25Angelox_123wait on second please...
15:15.50Angelox_123here:
15:15.51Angelox_123http://pastebin.com/7RgAeG4Y
15:16.48Angelox_123none of them work
15:18.20Angelox_123worked
15:18.25Angelox_123its battery
15:18.46Angelox_123is was weak
15:18.55Angelox_123thank champ!
15:19.10ao2ok :) as a suggestion, if you set param make sure you set all the needed options, here's mine, for example: http://pastebin.com/JAzpkkRy
15:20.41ao2now that a prebuilt kernel works, you may try to compile one by yourself so you can suit .config to your needs
15:21.04Angelox_123hum....iI'll set about it--- I aready try compile the openezx....with my configs....
15:22.53Angelox_123the openezx kernel support another file system for the secound partition?
15:23.43ao2I don't think ext3 is compiled in, you have to check out .config
15:24.02Angelox_123ok....
15:24.45Angelox_123have this: CONFIG_EXT3_FS=m
15:30.57*** join/#openezx ao2 (~ao2@cl-35.trn-01.it.sixxs.net)
15:32.36Angelox_123What is>
15:32.37Angelox_123??
15:37.31Angelox_123ao2......Have any rootfs with graphical mode?i tried one of angstrom(for Ipaq H400 - OPIE) and do not open the window manager....
15:38.00ao2not now Angelox_123
15:38.14ao2I am working on GSM so I don't need UI for now
15:38.43ao2if you get to know openEmbedded you can build images with GUI yourself
15:39.15Angelox_123hum....Ok...you working GSM to A780 or other?
15:46.02ao2a780 and a1200
15:48.02Angelox_123hummm
15:48.13Angelox_123thanks all
16:25.13*** join/#openezx toi (~toi@d54C2AA76.access.telenet.be)
17:32.05*** join/#openezx mickey|zzZZzz (~mickey@80.81.242.146)
18:15.38*** join/#openezx Angelox_123 (~root@201-95-46-43.dsl.telesp.net.br)
18:15.54Angelox_123Hello all
18:24.59*** join/#openezx florian (~fuchs@Maemo/community/contributor/florian)
19:36.55*** join/#openezx angelo (c95f2e2b@gateway/web/freenode/ip.201.95.46.43)
19:37.11angeloHello all
19:53.57*** join/#openezx Angelox-123 (~root@201-95-46-43.dsl.telesp.net.br)
19:54.27Angelox-123Where i can download the toolchain to compile the original 2.4 motorola kernel???The links do not work......
19:55.50*** join/#openezx ao2 (~ao2@cl-35.trn-01.it.sixxs.net)
19:59.15Angelox-123Hello ao2.
19:59.18Angelox-123Where i can download the toolchain to compile the original 2.4 motorola kernel???The links do not work......
20:54.07ao2Angelox-123, let me see if I have one here
20:55.13ao2this could work http://www.codeminders.com/ezx/
20:55.53ao2maybe this one too, but I haven't tried http://www.linuxtogo.org/~mickeyl/tools/oe-iwmmxt.tar.bz2
20:57.04ao2if these don't work I have one still here on my disk, but it'll take a while to upload it, it's 135 MiB uncompressed
21:05.02Angelox-123Can you give me of you disk??/ the of codeminders its for 64bits,my pc its 32bits.
21:15.23ao2ok, I'll upload it tomorrow
21:17.25Angelox-123Thanks..Pass the link to my e-mail angelo@angeste.com.br
21:51.59*** join/#openezx darion76 (~darion76@92-49-240-27.dynamic.peoplenet.ua)
21:52.34*** part/#openezx darion76 (~darion76@92-49-240-27.dynamic.peoplenet.ua)
22:04.36*** join/#openezx mickey|zzZZzz (~mickey@80.81.242.146)
23:01.17*** part/#openezx Angelox-123 (~root@201-95-46-43.dsl.telesp.net.br)
23:18.21*** join/#openezx file (~file@asterisk/developer-and-muffin-lover/file)

Generated by irclog2html.pl Modified by Tim Riker to work with infobot.