| 01:24.18 | *** join/#openezx bjk (n=bjk@206.191.246.131) |
| 01:25.01 | bjk | is there an x86 port of the ts0710_mux/usb driver? |
| 01:31.57 | *** join/#openezx muromec_ (n=muromec@212-178-23-184.broadband.tenet.odessa.ua) |
| 01:33.05 | bjk | nm |
| 02:19.46 | *** join/#openezx _Andrew (n=andrew@unaffiliated/andrew/x-643872) |
| 06:08.53 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 07:58.54 | *** join/#openezx parmaster_ (i=par@dipole.idlepattern.com) |
| 07:59.23 | *** join/#openezx l404 (n=l@85.132.159.239) |
| 08:04.47 | *** join/#openezx gmzhuo (n=Administ@58.59.133.221) |
| 08:07.06 | *** join/#openezx l403 (n=l@85.132.159.239) [NETSPLIT VICTIM] |
| 08:07.06 | *** join/#openezx _Andrew (n=andrew@unaffiliated/andrew/x-643872) [NETSPLIT VICTIM] |
| 08:07.06 | *** join/#openezx methril|work (n=Methril@127.Red-80-38-102.staticIP.rima-tde.net) [NETSPLIT VICTIM] |
| 08:07.06 | *** join/#openezx parmaster (i=par@dipole.idlepattern.com) [NETSPLIT VICTIM] |
| 08:08.36 | *** join/#openezx _Andrew (n=andrew@unaffiliated/andrew/x-643872) |
| 08:12.25 | *** join/#openezx tmzt (n=tmzt@adsl-76-244-147-106.dsl.akrnoh.sbcglobal.net) [NETSPLIT VICTIM] |
| 08:12.57 | *** join/#openezx lclaudio (n=lclaudio@189.4.27.111) [NETSPLIT VICTIM] |
| 08:12.57 | *** join/#openezx flyhorse|linux (n=flyhorse@116.4.155.157) [NETSPLIT VICTIM] |
| 08:49.24 | *** join/#openezx florian (n=fuchs@port-217-146-132-69.static.qsc.de) |
| 08:49.27 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 09:07.25 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 09:34.46 | *** join/#openezx Sleep_Walker (n=Sleep@nat/novell/x-xkwaxkvblkheohlc) |
| 11:23.55 | *** join/#openezx pleemans (n=toi@d51A49C45.access.telenet.be) |
| 11:38.45 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 13:29.09 | *** join/#openezx marex (n=marex@209.40.201.74) |
| 14:24.10 | *** join/#openezx lclaudio (n=lclaudio@189.4.27.111) |
| 14:24.53 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 14:45.44 | *** join/#openezx pH5 (n=ph5@e178202126.adsl.alicedsl.de) |
| 14:48.57 | yang | ciao ao2 ! |
| 15:06.57 | ao2 | ciao yang |
| 16:06.30 | *** join/#openezx empty_bucket (n=kazik@host-86-63-143-16.nplay.net.pl) |
| 16:21.43 | *** join/#openezx pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 16:39.20 | *** join/#openezx marex (n=marex@thor.hackndev.com) |
| 17:17.28 | *** join/#openezx gmzhuo (n=gmzhuo@125.70.173.173) |
| 17:33.04 | *** join/#openezx maxinbjohn (n=Maxin@122.172.34.155) |
| 17:34.12 | maxinbjohn | Hi, can I download a pre-built openembedded toolchain for A1600 kernel compilation ? |
| 17:39.35 | maxinbjohn | I am hoping to compile a 2.6.31 kernel with the same .config as that of A1200.. |
| 17:40.27 | ao2 | maxinbjohn, I can pack my toolchain and upload it somewhere, are you on a 32 or 64 bit system |
| 17:40.29 | ao2 | ? |
| 17:40.50 | maxinbjohn | I am using a 32 bit system... |
| 17:40.56 | maxinbjohn | Intel based.. |
| 17:41.09 | ao2 | btw, have you been able to get telnet access yet? |
| 17:41.25 | maxinbjohn | yes. it works.. |
| 17:41.38 | maxinbjohn | I have cross compiled latest busybox... |
| 17:41.49 | maxinbjohn | and used the telnetd of busybox |
| 17:42.07 | maxinbjohn | videos are available at www.maxinbjohn.info :) |
| 17:43.11 | ao2 | cool, will you update a a1600 page on our wiki with some info from /proc? |
| 17:43.40 | maxinbjohn | sure, I am ready .. |
| 17:44.24 | maxinbjohn | Please tell me how.. |
| 17:45.17 | maxinbjohn | I have added the A1600 info to wikipedia : http://en.wikipedia.org/wiki/Motorola_A1600 |
| 17:49.26 | ao2 | maxinbjohn, something like http://wiki.openezx.org/A910 |
| 17:49.51 | maxinbjohn | Ok.. Updated the http://wiki.openezx.org/Bootloader already.. |
| 17:50.21 | ao2 | thanks, the other things can go to http://wiki.openezx.org/A1600 |
| 17:51.26 | ao2 | I'll make that page more visible on the wiki frontpage |
| 17:51.43 | maxinbjohn | Hi Antonio, I think that page is already present.. |
| 17:53.41 | maxinbjohn | Faster CPU - Marvell PXA270 Applications Processor : In my case it was Intel Xscale PXA270 |
| 17:54.46 | ao2 | yes, maxinbjohn it would be good if you could put the output of some commands run via telnet, like in A910 page |
| 17:55.31 | maxinbjohn | Ok. I will refer that page and update the A1600 wiki |
| 18:09.42 | maxinbjohn | Hi Antonio, I am updating the page.. Could you please tell me the URL of toolchain so that I can start the download in parallel :) |
| 18:10.02 | ao2 | maxinbjohn, I am still packing it, it will take a while |
| 18:10.29 | maxinbjohn | Oh.. I am sorry .. I thought there is an existing URL. |
| 18:10.29 | ao2 | 144MiB |
| 18:12.17 | ao2 | ah maxinbjohn I've found this one, but I never tested it http://downloads.openmoko.org/developer/toolchains/openmoko-i686-20080916-arm-linux-gnueabi-toolchain.tar.bz2 |
| 18:12.52 | ao2 | 20MiB |
| 18:18.27 | maxinbjohn | thanks.. got it |
| 18:43.44 | yang | ao2: still around ? |
| 18:49.53 | *** join/#openezx empty_bucket (n=kazik@host-86-63-143-16.nplay.net.pl) |
| 19:07.29 | ao2 | yang |
| 19:10.23 | maxinbjohn | Hi ao2, I have updated the page : http://wiki.openezx.org/A1600 |
| 19:10.44 | maxinbjohn | Please let me know if some more informations are required ( I have included the dmesg also) |
| 19:15.49 | ao2 | maxinbjohn, useful, thanks. Now when you have some time it could be interesting to research what camera sensor is used and how GPS works, but I guess GPS works like in a780, using a lapisrv process which talks to the mux_cli driver |
| 19:16.36 | maxinbjohn | I will try to test GPS.. |
| 19:16.51 | maxinbjohn | I am not so sure how to test camera sensor.. |
| 19:16.55 | ao2 | just see if there is a lapisrv process running, this could be a good hint |
| 19:17.10 | maxinbjohn | I will try it out now.. |
| 19:17.22 | ao2 | about camera sensor, we could get the kernel image and search for strings in it |
| 19:17.47 | ao2 | or, launch the camera app and look if something is printed on dmesg |
| 19:18.00 | maxinbjohn | yes, lapisrv is running.. |
| 19:18.20 | ao2 | so you will get GPS also with openezx eventually |
| 19:18.20 | maxinbjohn | oh ok... |
| 19:18.33 | maxinbjohn | great !! |
| 19:20.09 | ao2 | ah 64MiB of ram in a single bank, good |
| 19:21.10 | *** join/#openezx tombhadAC (n=tombhad@pD95DCA85.dip.t-dialin.net) |
| 19:21.44 | ao2 | 128MiB of flash |
| 19:23.35 | ao2 | maxinbjohn, to dump the kernel image you could do "dd if=/dev/mtd7 of=kernel.bin" |
| 19:23.36 | maxinbjohn | http://pastebin.com/m5fa92efd |
| 19:23.57 | maxinbjohn | Ok.. I will do that.. |
| 19:24.12 | maxinbjohn | I have pasted the information from dmesg after starting camera |
| 19:24.22 | ao2 | mmh, they call sensor3m, no actual sensor model |
| 19:25.43 | ao2 | we could search for sensor3m also in kernel released by moto, but I remember that that was not a very useful release |
| 19:26.12 | maxinbjohn | I have downloaded the source.. Yes .. A1600 release was a "joke" |
| 19:29.49 | maxinbjohn | I have downloaded boot_usb code.. |
| 19:30.33 | maxinbjohn | Should I require any other softwares other than boot_usb, A1600 kernel for booting A1600 ? |
| 19:32.28 | ao2 | maxinbjohn, not for a first try, boot_usb and a kernel is enough |
| 19:33.34 | empty_bucket | hello all |
| 19:33.41 | ao2 | hi empty_bucket |
| 19:33.42 | maxinbjohn | Oh ok.. Thanks ao2.. I wil try this and let you know the status tomorrow.. |
| 19:34.01 | maxinbjohn | bye for now.. |
| 19:34.14 | ao2 | bye maxinbjohn |
| 19:34.39 | empty_bucket | ao2: have you got any ideas what I should do with my white screen? |
| 19:35.14 | ao2 | empty_bucket, something wrong on gen-blob, may be my fault |
| 19:35.24 | ao2 | empty_bucket, can you compile gen-blob? |
| 19:36.12 | empty_bucket | ao2: it works when I use ezx_defconfig, but when I add root over nfs it stops working |
| 19:37.31 | empty_bucket | ao2: ok I'll try to compile gen-blob |
| 19:38.59 | ao2 | empty_bucket, you are using a910 right? |
| 19:39.05 | empty_bucket | ao2: yes |
| 19:39.31 | ao2 | ans you get the white screen also from MBM |
| 19:39.37 | ao2 | and |
| 19:40.24 | ao2 | in my case I a getting the white screen only when I use gen-blob, but I can use nfsroot if I boot the kernel without it |
| 19:40.43 | ao2 | also, what toolchain are you using? |
| 19:42.03 | empty_bucket | ao2: I am using arm-angstrom-linux-gnueabi |
| 19:42.48 | ao2 | empty_bucket, did you built it yourself with OE? |
| 19:42.48 | empty_bucket | ao2: I didn't flash the genblob to the phone |
| 19:43.16 | ao2 | empty_bucket, neither I did, I was referring to gen-blob launched via usb |
| 19:44.17 | empty_bucket | ao2: yes , I built OE and copied whole directory from there with compilator |
| 19:45.35 | ao2 | ok, than the toolchian should be ok |
| 19:46.09 | ao2 | so you are not using gen-blob at all, neither flashed or loaded via usb, right? |
| 19:47.08 | empty_bucket | ao2: sorry for not being clear , I am using "./boot_usb_svnr2421 gen-blob 0" |
| 19:48.03 | ao2 | ok, try without it, loading the kernel directly when you see the red scree |
| 19:48.36 | ao2 | this way I can use nfsroot |
| 19:49.24 | empty_bucket | ao2: ok I'll try in a moment , kernel is just compiling |
| 19:49.32 | ao2 | ./boot_usb zImage 1745 |
| 19:55.43 | empty_bucket | ao2:you are wrght, no white screen this way |
| 19:56.25 | ao2 | gen-blob needs to be fixed then, I will look into this tomorrow |
| 19:56.27 | empty_bucket | ao2: but I can't append any kernel parameters this way? |
| 19:56.45 | ao2 | empty_bucket, you will need to edit CONFIG_CMDLINE |
| 19:57.09 | empty_bucket | ao2: funny thing , that the old kernel was working with this genblob |
| 19:57.48 | ao2 | can you please summarize the versions of kernels and gen-blob you are using? |
| 20:02.20 | empty_bucket | ao2: I am using same gen-blob(how should i find out what version it is?)all the time , while I was using kernel from master branch (before you instructed me how to change) there was no white screen issue(but battery problem) now with origin/ezx/current kernel with default config boots ok, when I try to add rootnfs I get white screen |
| 20:03.59 | ao2 | kernel from master branch should not be used at all, as it lacks pcap initialization in ezx.c |
| 20:04.17 | ao2 | for gen-blob version you can see it when you send it via usb |
| 20:05.07 | ao2 | latest is "OpenEZX blob 090721" |
| 20:05.45 | empty_bucket | ao2: I'm using blob 090504 |
| 20:06.39 | ao2 | ok, thanks, so that version is buggy as well |
| 20:07.04 | ao2 | empty_bucket, I am going away from keyboard for some hours |
| 20:07.35 | empty_bucket | ao2: ok, thanks for your help |
| 20:08.18 | ao2 | you're welcome, I'll let you know if I figure out what's wrong with gen-blob |
| 20:09.40 | empty_bucket | ao2: thanks, are you sure it's gen-blob fault? if kernel from master was working it some kind of regression in kernel? |
| 20:11.12 | ao2 | kernel from master is not supposed to work at all :) |
| 20:11.56 | empty_bucket | ao2: but its funny it was working;) |
| 20:12.11 | ao2 | indeed |
| 20:17.49 | empty_bucket | ao2: thanks again, and see you later |
| 20:23.06 | *** join/#openezx florian (n=fuchs@f048106119.adsl.alicedsl.de) |
| 20:38.02 | *** join/#openezx tombhadAC (n=tombhad@pD95DCF05.dip.t-dialin.net) |
| 21:20.38 | *** join/#openezx sten (n=mheinzes@160.129.138.93) |
| 22:11.38 | *** join/#openezx tombhadAC (n=tombhad@pD95DFC07.dip.t-dialin.net) |
| 22:32.23 | *** join/#openezx gDD (n=gDD@unaffiliated/gdd) |
| 22:57.06 | *** join/#openezx flo_lap (n=fuchs@f048106119.adsl.alicedsl.de) |
| 23:28.07 | *** join/#openezx tombhadAC (n=tombhad@pD95DF9A6.dip.t-dialin.net) |