| 00:00.10 | tmzt | once before cat prints the value and once after |
| 00:00.10 | WyrM | hum. |
| 00:00.50 | WyrM | usb plug/unplug generates 2 interrupts. |
| 00:01.21 | WyrM | but you shouldn't be getting these, and definitelly they shouldn't go the the adc callback. |
| 00:01.55 | tmzt | yes, but it gets those two interrupts while usb is plugged in, not just when plugging it in |
| 00:02.26 | WyrM | not really. |
| 00:02.37 | WyrM | you get one interrupt. |
| 00:02.49 | WyrM | but it gets expanded to 3. |
| 00:03.16 | tmzt | I mean every read while usb is plugged in gets the error message twice |
| 00:04.14 | tmzt | what causes pcap interrupt to call udc_command? |
| 00:04.46 | tmzt | I mean if we are using pcap for vbus detect, where is that handled? |
| 00:05.00 | WyrM | nothing. |
| 00:05.19 | WyrM | udc command is called from usb code. |
| 00:05.59 | WyrM | try http://people.openezx.org/wyrm/tmzt.patch |
| 00:06.26 | tmzt | git-apply? |
| 00:06.41 | WyrM | and send me the dump of a single adc_battery read with the usb cable plugged in (with the errors) |
| 00:06.51 | WyrM | with patch -p1 < tmzt.patch |
| 00:16.31 | tmzt | isr00480405 msr007bfffe |
| 00:16.40 | tmzt | services00000001 |
| 00:16.47 | tmzt | isr00480405 msr007bfffe |
| 00:16.53 | tmzt | services00000001 |
| 00:17.10 | tmzt | I havent asked for ADC! Maybe BP? Ignoring |
| 00:17.21 | tmzt | isr00480405 msr007bfffe |
| 00:17.26 | tmzt | service00000001 |
| 00:17.37 | tmzt | I havent asked for ADC! Maybe BP? Ignoring |
| 00:18.29 | tmzt | . |
| 00:18.38 | tmzt | cat also output a value |
| 00:20.47 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 00:22.02 | WyrM | hum. |
| 00:22.23 | WyrM | echo "0 480404" > regs |
| 00:22.37 | WyrM | and cat adc_battery again. |
| 00:22.50 | WyrM | without unplugging/plugging the usb cable. |
| 00:23.43 | tmzt | isr00000005 msr007bfffe |
| 00:23.48 | tmzt | service00000001 |
| 00:23.53 | tmzt | isr00000005 msr007bfffe |
| 00:23.57 | tmzt | 608 |
| 00:24.01 | tmzt | service00000001 |
| 00:24.05 | tmzt | I havent asked for ADC! Maybe BP? Ignoring |
| 00:24.13 | tmzt | . |
| 00:24.45 | WyrM | only one error this time? |
| 00:25.01 | tmzt | yes |
| 00:34.53 | WyrM | tmzt: revert the last patch |
| 00:35.21 | WyrM | download again from the same url, and test. |
| 00:37.15 | WyrM | bb in 20 mins. |
| 01:01.47 | WyrM | tmzt: results? |
| 01:44.06 | tmzt | isr00480405 msr007bfffe |
| 01:44.12 | tmzt | service00000001 |
| 01:44.17 | tmzt | 584 |
| 01:44.34 | tmzt | isr00000001 msr007bfffe |
| 01:44.51 | tmzt | service00000001 |
| 01:45.07 | tmzt | I havent asked for ADC! Maybe BP? Ignoring |
| 01:45.09 | tmzt | . |
| 01:47.07 | WyrM | you haven't readded the GPIO1 vbus code to motoq.c right? |
| 01:47.14 | tmzt | no |
| 01:47.31 | WyrM | weird. :/ |
| 01:47.46 | WyrM | you really get more than one interrupt on gpio1 |
| 01:48.17 | tmzt | but only when usb is plugged in? |
| 01:48.35 | *** join/#openezx sabrod (n=mac@lns-bzn-20-82-64-8-105.adsl.proxad.net) |
| 01:48.36 | WyrM | this is even more weird ;) |
| 01:48.54 | tmzt | something checking the chargerid? |
| 01:49.02 | WyrM | no |
| 01:49.29 | WyrM | it would go to another interrupt pin. |
| 01:49.46 | WyrM | ahh, maybe these 2 pins are connected together? |
| 01:51.57 | WyrM | on ezx_pcap_probe, /* redirect interrupts to AP */ change to ezx_pcap_write(PCAP_REG_INT_SEL, 0); |
| 02:08.10 | tmzt | WyrM: I read that wrong, sorry |
| 02:25.10 | WyrM | tmzt: does this last change work? |
| 02:27.50 | tmzt | booting, the zImage was corrupted |
| 02:30.23 | tmzt | isr00000005 msr007bfffe |
| 02:30.28 | tmzt | service00000001 |
| 02:30.33 | tmzt | 569 |
| 02:30.36 | tmzt | hold on |
| 02:30.54 | tmzt | no, that's without usb |
| 02:31.17 | tmzt | isr00480405 msr007bfffe |
| 02:31.23 | tmzt | service00000001 |
| 02:31.43 | tmzt | isr00000001 msr007bfffe |
| 02:31.44 | tmzt | service00000001 |
| 02:31.50 | tmzt | I havent asked for ADC! Maybe BP? Ignoring |
| 02:32.00 | tmzt | isr00000001 msr007bfffe |
| 02:32.06 | tmzt | 569 |
| 02:32.09 | tmzt | service00000001 |
| 02:32.11 | tmzt | I havent asked for ADC! Maybe BP? Ignoring |
| 02:32.32 | tmzt | . |
| 02:38.30 | WyrM | weird. |
| 02:38.50 | WyrM | I don't know what is happening with your device. |
| 02:39.05 | WyrM | you should get only one interrupt on gpio1, but you get 3. |
| 02:39.09 | tmzt | ezx_pcap_register_event((pdata->config & PCAP_SECOND_PORT) ? PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE, |
| 02:39.24 | tmzt | on that one it is ADCDONE2 on PCAP_SECOND_PORT ? |
| 02:39.35 | WyrM | yes. |
| 02:39.45 | WyrM | but you are on port1 |
| 02:40.02 | tmzt | if (!(pdata->config & PCAP_SECOND_PORT)) //ezx_pcap_write(PCAP_REG_INT_SEL, PCAP_IRQ_ADCDONE2); |
| 02:40.07 | tmzt | then what's this one? |
| 02:40.29 | WyrM | PCAP_REG_INT_SEL selects to which port each IRQ will go. |
| 02:40.42 | WyrM | I don't asked you to comment this line. |
| 02:40.52 | WyrM | I asked you to change the write to 0. |
| 02:41.07 | WyrM | to redirect both ADCDONE and ADCDONE2 to the AP. |
| 02:42.19 | WyrM | anyway, just forget about this adc issue. |
| 02:42.38 | WyrM | I will make the code to ignore adc results if there is no adc request pending permanent. |
| 02:43.43 | WyrM | revert all pcap changes, and let the spurious irq be ignored. |
| 02:49.43 | CIA-29 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * r2d25e3ad22 10openezx/drivers/mfd/ezx-pcap.c: ignore extra interrupts from pcap on adc result. (this was already on the code, now it is permanent). |
| 02:50.08 | CIA-29 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07motoq/mach * r2d25e3ad22 10openezx/drivers/mfd/ezx-pcap.c: ignore extra interrupts from pcap on adc result. (this was already on the code, now it is permanent). |
| 02:52.50 | WyrM | tmzt: update from git.openezx, this should solve the issue for now. |
| 02:53.50 | WyrM | if motoq was touchscreen, then we would need a proper fix, but as you will not use the adc that much this "fix" is enough. ;) |
| 02:54.49 | WyrM | is your usb working? or no success so far? |
| 02:57.17 | tmzt | it works if I boot with it plugged in |
| 02:57.55 | WyrM | if you plug it later, what happens? |
| 02:58.05 | tmzt | building the new kernel |
| 02:58.19 | WyrM | you see reset messages, host recognizes it but it don't work? |
| 02:58.41 | tmzt | no messages |
| 02:58.52 | WyrM | no messages at all? |
| 02:59.05 | WyrM | then you need to map the emu gpios from haret. |
| 02:59.39 | WyrM | check if you see gpios configured for output that changes the output value depending on wheter usb is connected or not. |
| 03:00.10 | WyrM | on a780/e680 its 120 and 119. |
| 03:00.38 | tmzt | ok |
| 03:02.32 | WyrM | if the hardware design is similar (which I think it is) you are looking for 2 gpios that go high when you plug the usb. |
| 03:02.48 | WyrM | when these 2 gpios are low, the miniusb port is configured for audio. |
| 03:30.46 | tmzt | it looks like most of the outputs are af2 for lcd |
| 03:36.03 | WyrM | tmzt: these will be no af (af0). |
| 03:47.14 | tmzt | 017.841 GPIOS GPLR3: GPIO116(116)=1 |
| 03:47.14 | tmzt | 018.041 GPIOS GPLR3: GPIO117(117)=0 |
| 03:47.14 | tmzt | 018.149 GPIOS GPLR3: GPIO117(117)=1 |
| 03:47.14 | tmzt | 018.175 GPIOS GPLR3: GPIO117(117)=0 |
| 03:47.14 | tmzt | 018.258 GPIOS GPLR3: GPIO116(116)=0 |
| 03:47.16 | tmzt | 018.276 GPIOS GPLR3: GPIO117(117)=1 |
| 03:47.46 | tmzt | <PROTECTED> |
| 03:51.32 | tmzt | <PROTECTED> |
| 03:52.56 | tmzt | <PROTECTED> |
| 03:53.09 | WyrM | I would go with 119 and 120, as they are already known on a780. |
| 03:53.40 | WyrM | does any of these pins goes low when you unplug usb? |
| 03:53.58 | tmzt | no, that was without usb plugged in |
| 03:56.15 | tmzt | I'm only seeing that strobing |
| 04:03.06 | WyrM | hum. |
| 04:03.12 | WyrM | I think its not even related. |
| 04:03.24 | WyrM | where are you setting UP2OCR on motoq.c? |
| 04:03.29 | WyrM | I don't see it getting set. |
| 04:04.11 | WyrM | UP2OCR = UP2OCR_SEOS(2); |
| 04:04.20 | WyrM | before pxa_set_udc_info. |
| 04:04.38 | WyrM | it is needed to configure the usb port to use an external transceiver. |
| 04:09.12 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 04:19.46 | tmzt | oh, right |
| 04:21.14 | *** join/#openezx sn9 (n=danielg4@gimpelevich.san-francisco.ca.us) |
| 04:22.20 | sn9 | anybody here the guy behind http://linmob.blogspot.com/ ? |
| 04:30.34 | WyrM | sn9: hi. |
| 04:30.39 | WyrM | sn9: long time no see :) |
| 04:30.48 | WyrM | sn9: its p3t3r's blog. |
| 04:39.45 | sn9 | WyrM: yeah, sorry i kinda got out of a910 modding for a while, but i tend to use the Recent Calls feature a lot, and that makes it rather inconvenient |
| 04:40.27 | sn9 | i guess those patches i never got around to submitting would be rather useless now |
| 04:40.51 | sn9 | i'm still on the quest for working uma |
| 04:41.37 | sn9 | flashed with i-geekmod today, and apparently no uma at all in there |
| 04:42.44 | WyrM | yeah, igeekmod enables web surfing via 802.11 |
| 04:42.50 | WyrM | but no sip yet. |
| 04:43.45 | sn9 | well, it doesn't quite do that, either |
| 04:44.02 | WyrM | hum. |
| 04:44.11 | WyrM | it worked for me here |
| 04:44.37 | sn9 | it only gets an ip address if i manually run dhcpcd in freakbox, but then freakbox crashes on exit |
| 04:46.12 | sn9 | not sure why it works for others |
| 04:48.18 | sn9 | for sip, i can install a java app, but that won't get me uma |
| 04:49.46 | sn9 | i grabbed a linksys wrtu54g-tm for $40 on ebay, so i know my sim works for uma |
| 04:50.36 | sn9 | it's an interesting contraption. analog phone over uma over ethernet |
| 05:23.35 | CIA-29 | OpenEZX: 03Timothy Meade <zt.tmzt@gmail.com> 07motoq/mach * r4999aff35f 10openezx/arch/arm/mach-pxa/motoq.c: configure usb client port for an external tranceiver before initializing udc |
| 05:53.08 | *** join/#openezx flyhorse|linux (n=flyhorse@116.4.155.3) |
| 07:03.15 | *** join/#openezx pleemans (n=toi@116.54-246-81.adsl-static.isp.belgacom.be) |
| 07:43.14 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 07:47.42 | *** join/#openezx agd5f (n=alex@c-68-49-28-208.hsd1.va.comcast.net) |
| 08:01.43 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 08:04.11 | *** join/#openezx shiv (n=root@59.160.172.220) |
| 08:04.48 | shiv | could some help me to get console on E6e? |
| 09:26.33 | Hopscotch | good morning |
| 10:03.17 | *** join/#openezx borman999 (n=quassel@ppp85-140-150-95.pppoe.mtu-net.ru) |
| 10:13.59 | *** join/#openezx ade|desk (n=adavey@195.153.131.254) |
| 10:28.48 | *** join/#openezx darion76 (n=darion@plant.ogneupor.com) |
| 11:13.48 | sn9 | shiv: have you found a loader.mpkg and sshd.mpkg that it will accept? |
| 11:33.22 | CIA-29 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * ra0f72510d2 10openezx/ (.topdeps .topmsg): create |
| 11:33.25 | CIA-29 | OpenEZX: 03guiming zhuo <gmzhuo@gmail.com> 07ezx/current * re78594f4d4 10openezx/drivers/rtc/ (Kconfig Makefile rtc-pcap.c): add pcap-rtc driver. |
| 11:35.26 | *** join/#openezx florian_ (n=fuchs@217.146.132.69) |
| 12:13.09 | *** join/#openezx gmzhuo (n=gmzhuo@118.112.227.14) |
| 12:13.23 | gmzhuo | Hi,WyrM |
| 12:13.32 | WyrM | hi gmzhuo |
| 12:13.54 | gmzhuo | Have you test the bp on your A1200? |
| 12:14.08 | WyrM | yes. |
| 12:14.15 | WyrM | still not stable. |
| 12:14.15 | gmzhuo | How about it? |
| 12:14.41 | WyrM | bp lowers wdi after less than 60 seconds. |
| 12:14.58 | gmzhuo | any AT CMD? |
| 12:15.03 | WyrM | yes. |
| 12:15.10 | WyrM | but it was working before :) |
| 12:15.37 | WyrM | it is still something with bp suspend/resume |
| 12:15.49 | WyrM | if I keep talking to bp it won't die. |
| 12:16.03 | WyrM | if I pass 2 seconds without talking it lowers wdi. |
| 12:18.00 | WyrM | gmzhuo: anyway, I did the bp resume thing different than you. |
| 12:19.11 | sn9 | ear-wdi is not a river in burma |
| 12:19.42 | gmzhuo | will you test my ezxd (in fact it is opentapi) |
| 12:20.15 | WyrM | I don't think it is the issue. |
| 12:20.21 | gmzhuo | http://people.openezx.org/gmzhuo/ezxd |
| 12:20.24 | WyrM | I open the same mux as you. |
| 12:20.37 | WyrM | unless there is some at command you want me to test? |
| 12:21.09 | gmzhuo | So you think is about suspend/resume?then how about remove it? |
| 12:21.20 | WyrM | remove what? |
| 12:21.43 | WyrM | I don't want to remove anything. :) |
| 12:22.04 | WyrM | the bp resume code is working. |
| 12:22.11 | WyrM | once, but it works. ;) |
| 12:22.44 | gmzhuo | which code?you mean wake up bp with gpio operation?> |
| 12:22.55 | WyrM | yes |
| 12:23.11 | gmzhuo | It works on my E6 too |
| 12:23.30 | WyrM | on a1200 it works a single time. |
| 12:23.43 | gmzhuo | I can see sometimes this operation is called |
| 12:23.55 | WyrM | the second time bp goes to suspend it it raises rdy and lowers wdi at the same time. |
| 12:26.02 | gmzhuo | Like as only open 8 mux device |
| 12:26.28 | WyrM | hum. |
| 12:26.51 | WyrM | iirc I only open mux0 - mux8, should I open any other? |
| 12:27.05 | gmzhuo | You mean if you keep talking to bp it will keep works? |
| 12:27.18 | gmzhuo | No,no others |
| 12:27.56 | WyrM | yes. |
| 12:28.07 | WyrM | I think it is something related to some at command. |
| 12:28.15 | WyrM | because I see it getting suspended. |
| 12:28.46 | WyrM | and if I don't talk to it, it wakes up (raise rdy) and lowers wdi at the same time. |
| 12:29.20 | gmzhuo | I excute AT+EPOM=1,0 when ezxd start |
| 12:29.24 | WyrM | and if I talk to it, it gets waken by ap correctly, and dies the next time it is suspended. |
| 12:29.35 | WyrM | and if you don't? |
| 12:29.40 | WyrM | does bp wdi goes low? |
| 12:30.06 | gmzhuo | I rember it will not,just only I can't excute atd |
| 12:30.14 | *** join/#openezx alphaone (n=alphaone@2001:638:602:af01:0:0:0:1) |
| 12:38.53 | gmzhuo | without at_epom=1.0,bp still works after two mini without any at command |
| 13:25.53 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 13:52.07 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 13:54.13 | *** join/#openezx BadCluster (n=badclust@190.50.161.18) |
| 14:09.31 | *** join/#openezx Wyr1 (n=wyrm@20158162234.user.veloxzone.com.br) |
| 14:27.19 | *** join/#openezx tombhadAC (n=tombhad@pD95DDB92.dip.t-dialin.net) |
| 14:31.42 | *** join/#openezx johanbr (n=j@JBrannlund2.MathStat.Dal.Ca) |
| 15:05.24 | gmzhuo | Hi,Wyrl |
| 15:05.57 | gmzhuo | Who update the project status? |
| 15:06.30 | stefan_schmidt | gmzhuo: If you feel confident about an update just go ahead and change it yourself. It's fine |
| 15:06.57 | gmzhuo | Should we say GSM, GPRS - Neptune LTE (mux_cli) on E6 state is 80% now? |
| 15:07.12 | stefan_schmidt | gmzhuo: What it is currently? |
| 15:07.50 | stefan_schmidt | gmzhuo: It should reflect what the status is in our right tree. Without any patches. |
| 15:07.53 | gmzhuo | I can make voice call on E6:) |
| 15:08.06 | stefan_schmidt | gmzhuo: Great :) |
| 15:08.15 | gmzhuo | And can hear from eachother |
| 15:08.19 | stefan_schmidt | gmzhuo: With or without local patches? |
| 15:08.25 | stefan_schmidt | gmzhuo: :) |
| 15:08.28 | gmzhuo | without |
| 15:09.07 | stefan_schmidt | gmzhuo: ok, then bump it to 80 |
| 15:09.31 | gmzhuo | Seems I lost my password on wiki |
| 15:10.05 | stefan_schmidt | gmzhuo: You can get it resend |
| 15:13.19 | gmzhuo | updated:) |
| 15:15.51 | gmzhuo | If I turn on the bluetooth(local code),bluetooth on E6 can work,can we say bluetooth on e6 is 90% too? |
| 15:16.55 | gmzhuo | s /turn on the /turn on the power of |
| 15:17.04 | gmzhuo | s/turn on the /turn on the power of |
| 15:20.30 | stefan_schmidt | gmzhuo: I would like to stay with the Project_Status matching what people get from the git repo. |
| 15:20.48 | stefan_schmidt | gmzhuo: Let's bump it when your code hit the repo. :) |
| 15:44.11 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 15:48.35 | *** join/#openezx WM (i=c88e3a12@gateway/web/ajax/mibbit.com/x-ccb100ef90b17f9c) |
| 15:55.32 | *** join/#openezx LoneStar (n=xinzhen@114.92.179.21) |
| 16:03.13 | shiv | hi sn9: sorry for delayed response ... I am trying getting shell as per procedure from http://wiki.openezx.org/Get_a_shell on E6e |
| 16:03.45 | shiv | did E6e comes with telnet enabled |
| 16:21.36 | sn9 | shiv: how far along are you? |
| 16:26.23 | shiv | sn9: I didn't got your question? |
| 16:26.36 | sn9 | how far did you get? |
| 16:26.49 | shiv | nothing yet, |
| 16:27.21 | sn9 | which method are you using to activate usblan? |
| 16:27.22 | shiv | I followed linformation as mentioned above link |
| 16:27.51 | shiv | echo "mode+13" > /dev/tty |
| 16:28.05 | shiv | i.e. tty device |
| 16:28.12 | sn9 | does the usb product id change when you do that? |
| 16:28.40 | shiv | I didn't verified it, but I can ping from both side |
| 16:29.08 | shiv | does E6e comes with telnet enabled... |
| 16:29.12 | sn9 | then what's wrong? |
| 16:29.34 | shiv | I can't telnet |
| 16:29.56 | sn9 | then how did you ping from the other side? |
| 16:30.16 | shiv | sorry... only from one side |
| 16:30.48 | shiv | from PC to E6e |
| 16:31.07 | sn9 | nmap it |
| 16:31.33 | shiv | means |
| 16:31.54 | sn9 | nmap 192.168.1.1 |
| 16:31.56 | shiv | Actually, Today only I started working with E6e |
| 16:32.53 | shiv | I just want to know, did E6e has telnet and ssh enableb |
| 16:33.05 | sn9 | nmap will tell you |
| 16:33.12 | shiv | ok |
| 16:34.30 | shiv | I will try nmap. |
| 16:35.33 | shiv | Could you please, point to link of how to get Linloader working on E6e |
| 16:38.39 | shiv | hi sn9: I checked It and Product Id gets changed |
| 16:38.54 | shiv | after doing echo |
| 16:41.04 | shiv | I got Interesting ports on 192.168.1.1: |
| 16:41.04 | shiv | Not shown: 1693 closed ports |
| 16:41.04 | shiv | PORT STATE SERVICE |
| 16:41.04 | shiv | 22/tcp open ssh |
| 16:41.04 | shiv | 111/tcp open rpcbind |
| 16:41.05 | shiv | 4000/tcp open remoteanything |
| 16:41.07 | shiv | 5900/tcp open vnc |
| 16:41.09 | shiv | <PROTECTED> |
| 16:43.17 | sn9 | then it has ssh, not telnet |
| 16:43.57 | shiv | but I can not ssh also to it... |
| 16:44.36 | sn9 | maybe telnet is on the ssh port |
| 16:45.08 | shiv | I didn't got.. |
| 16:47.08 | shiv | sn9: Really thanks for your help, I needs to go because of late night |
| 17:06.02 | *** join/#openezx WyrM (n=wyrm@20158136136.user.veloxzone.com.br) |
| 18:11.18 | *** join/#openezx pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 18:26.58 | *** part/#openezx ade|desk (n=adavey@195.153.131.254) |
| 18:28.34 | *** join/#openezx BadCluster (n=badclust@190.50.161.18) |
| 18:33.43 | *** join/#openezx WyrM (n=wyrm@20158157085.user.veloxzone.com.br) |
| 18:47.01 | *** join/#openezx l403 (n=l@85.132.159.239) |
| 20:04.42 | *** join/#openezx Wyr1 (n=wyrm@20158191117.user.veloxzone.com.br) |
| 21:34.32 | *** join/#openezx WyrM (n=wyrm@20158188150.user.veloxzone.com.br) |
| 22:04.04 | *** join/#openezx the_mgt (n=ich@dslb-082-083-206-009.pools.arcor-ip.net) |
| 23:03.25 | *** join/#openezx Wyr1 (n=wyrm@189.13.101.78) |
| 23:25.25 | *** join/#openezx tombhadAC (n=tombhad@pD95DE134.dip.t-dialin.net) |
| 23:45.55 | *** join/#openezx BadCluster (n=badclust@190.50.161.18) |