| 00:00.15 | WyrM | on 1st gen the _power_button_ is connected to BP (I get a AT command on mux4 when I press it). |
| 00:00.38 | WyrM | on the motorola design, the BP is the main processor, the AP is the secondary :) |
| 00:01.19 | WyrM | ao2: doesn't work how? |
| 00:01.24 | tmzt | have you found anything about tcmd, is that what qsd?? uses |
| 00:01.27 | WyrM | what goes wrong? |
| 00:01.38 | tmzt | rsd |
| 00:01.51 | ao2 | it places calls, but I can't get any audio |
| 00:02.01 | WyrM | no, rsd uses the same protocol as boot_usb |
| 00:02.02 | ao2 | it worked once on sunday |
| 00:02.21 | WyrM | I think that tcmd is the AT command interface that gets exported to the miniusb port. |
| 00:02.52 | WyrM | ao2: hum... it should work, as long as you set bp after the call is established. |
| 00:03.10 | WyrM | also, you have to set the output control to something. |
| 00:03.48 | ao2 | WyrM, sure, I set Output mode to Loudspeaker |
| 00:07.57 | WyrM | hah! |
| 00:08.06 | *** join/#openezx BadCluster (n=badclust@190.50.180.205) |
| 00:08.10 | WyrM | delaying UP3OCR write works perfectly! |
| 00:08.21 | WyrM | enumeration starts only after I setup the port. |
| 00:11.33 | tmzt | <PROTECTED> |
| 00:13.18 | WyrM | yes. |
| 00:13.24 | WyrM | but there are still bugs. |
| 00:13.38 | WyrM | but it at least enumerates 100% of the times I try. |
| 00:14.20 | CIA-20 | OpenEZX: 03Daniel Ribeiro <wyrm@brutus.(none)> 07ezx/current * rbdb2314f8b 10openezx/ (2 files in 2 dirs): |
| 00:14.20 | CIA-20 | OpenEZX: add a init() callback so ezx.c can do the ohci initialization. |
| 00:14.20 | CIA-20 | OpenEZX: (is there a better way to delay usb enumeration???) |
| 00:14.21 | CIA-20 | OpenEZX: 03Daniel Ribeiro <wyrm@brutus.(none)> 07ezx/current * rf7b5351599 10openezx/drivers/usb/core/hub.c: this is not needed, and only worked for gmzhuo because of the extra delay added |
| 00:14.23 | CIA-20 | OpenEZX: 03Daniel Ribeiro <wyrm@brutus.(none)> 07ezx/current * r219a6060b7 10openezx/arch/arm/mach-pxa/ezx.c: delay ohci init until after the handshake is done |
| 00:14.35 | WyrM | argh, let me setup my email :) |
| 00:15.39 | WyrM | let me go for a780, and confirm why it don't work for ao2. |
| 00:17.51 | WyrM | great. |
| 00:17.59 | WyrM | the ohci change broke a780 :( |
| 00:19.49 | WyrM | no, it works (was a too short press on the power button). |
| 00:20.36 | ao2 | OT: CNN is also doing telepresence experiments, they present a far speaker in the studio via "holograms" as they call that. It looks like a big advertisement to me... |
| 00:24.54 | WyrM | ao2: indeed, I can reproduce the bug you described. |
| 00:25.10 | WyrM | then I use the stereo dai to play a file.. |
| 00:25.18 | WyrM | and try BP again and it works. |
| 00:25.19 | WyrM | :/ |
| 00:25.47 | ao2 | I try that and add this workaround to the wiki page |
| 00:26.04 | WyrM | and I don't need to set BP after dialing. |
| 00:26.16 | WyrM | I can just leave it set and call repeatedly. |
| 00:26.25 | ao2 | I see |
| 00:26.55 | WyrM | so, something I do on hw_prepare is needed for bp to work. |
| 00:27.07 | WyrM | let me see if I can find it. |
| 00:29.36 | ao2 | ok, at least audio calls are reproducible |
| 00:40.19 | WyrM | ao2: as it seems, its an asoc issue. |
| 00:40.36 | WyrM | if I never use any real DAI (the bp dai is not a real DAI) |
| 00:40.48 | WyrM | then asoc will never setup the audio paths. |
| 00:43.25 | ao2 | I see, and do you think the setup can be forced someway? Or we will have to work around that in userspace? |
| 00:43.54 | WyrM | let me look at soc-core.c. |
| 00:44.04 | ao2 | playing some silence won't be a problem anyway |
| 00:44.17 | WyrM | well, I can always force it by directly writing the audio path to the pcap register ;) |
| 00:44.22 | WyrM | but its no fun :) |
| 00:45.37 | WyrM | -12 00032902 +12 000b4902 (- is the default just after boot, + always works) |
| 00:46.42 | WyrM | can you do a quick test for me while I do some research? :) |
| 00:47.24 | WyrM | just after boot, try to echo "12 000b4902" > /sys/bus/spi/devices/spi1.0/regs |
| 00:47.39 | WyrM | and try sound. (with never using the stereo dai) |
| 00:47.40 | WyrM | see if it works. |
| 00:47.49 | ao2 | let me reboot |
| 00:50.32 | ao2 | no, that is not enough |
| 00:50.49 | WyrM | try "13 000d9800" |
| 00:51.05 | WyrM | without playing stereo dai, no need to reboot again |
| 00:51.41 | ao2 | well, I already played it, so I guess a reboot is needed |
| 00:51.57 | WyrM | yeah :) |
| 00:56.28 | ao2 | WyrM, no even the socond setting isn't enough |
| 00:57.29 | WyrM | hum. |
| 00:57.34 | WyrM | so the issue is not pcap :/ |
| 00:58.27 | WyrM | I enable a 13mhz clock on gpio9 to play from AP, and don't from BP (but this shouldn't be needed), lets see what happens when I enable also for BP. |
| 00:58.28 | WyrM | :) |
| 00:59.21 | ao2 | I am going to bed WyrM it's 2 AM here |
| 00:59.30 | ao2 | see you tomorrow |
| 00:59.35 | WyrM | ao2: ok, gn! |
| 00:59.50 | ao2 | bye |
| 01:00.47 | *** join/#openezx sabrod__ (n=mac@lns-bzn-31-82-252-222-30.adsl.proxad.net) |
| 01:12.06 | *** join/#openezx agd5f (n=alex@c-68-49-28-208.hsd1.va.comcast.net) |
| 01:30.14 | *** join/#openezx flyhorse|linux (n=flyhorse@219.130.46.186) |
| 02:39.16 | *** join/#openezx WyrM (n=wyrm@189.13.221.88) |
| 03:24.51 | *** join/#openezx johanbr (n=j@blk-7-128-3.eastlink.ca) |
| 04:48.56 | *** join/#openezx flyhorse|linux (n=flyhorse@116.18.254.64) |
| 05:24.18 | *** join/#openezx WyrM (n=wyrm@20158130027.user.veloxzone.com.br) |
| 05:41.31 | *** join/#openezx LoneStar (n=xinzhen@218.80.193.59) |
| 06:01.41 | *** join/#openezx the_mgt_ (n=ich@dslb-082-083-246-037.pools.arcor-ip.net) |
| 06:48.09 | *** join/#openezx pleemans (n=toi@116.54-246-81.adsl-static.isp.belgacom.be) |
| 08:54.27 | *** join/#openezx BadCluster1 (n=badclust@190.50.214.86) |
| 09:14.47 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 09:25.04 | *** part/#openezx BadCluster1 (n=badclust@190.50.214.86) |
| 09:25.08 | *** join/#openezx BadCluster1 (n=badclust@190.50.214.86) |
| 09:47.43 | *** join/#openezx florian_ (n=fuchs@217.146.132.69) |
| 10:28.51 | *** join/#openezx WyrM (n=wyrm@20158180077.user.veloxzone.com.br) |
| 10:49.15 | yang | ciao ao2 |
| 10:50.57 | ao2 | živijo yang, kako si? |
| 10:54.09 | ao2 | (should be "hi yang, how are you?" in slovenian, right?) please reply in english :) |
| 11:06.33 | *** join/#openezx LoneStar (n=xinzhen@218.80.193.59) |
| 11:09.04 | yang | haha ao2 that is correct ! |
| 11:09.37 | yang | congratulates #OpenEZX coders for the good work ! (call support) |
| 11:39.19 | *** join/#openezx l403 (i=c3717605@gateway/web/ajax/mibbit.com/x-d0a104e43ac5bb20) |
| 12:46.06 | *** part/#openezx BadCluster1 (n=badclust@190.50.214.86) |
| 12:57.08 | *** join/#openezx gmzhuo (n=gmzhuo@118.113.161.151) |
| 13:04.48 | *** join/#openezx l403 (i=c3717605@gateway/web/ajax/mibbit.com/x-ed0d9e12d22ae72c) |
| 13:08.44 | gmzhuo | Hi,WyrM |
| 13:12.42 | gmzhuo | purl:purl? |
| 13:12.43 | purl | We are the purl, prepare to be assimilated |
| 13:13.02 | gmzhuo | purl:good boy! |
| 13:13.02 | purl | gmzhuo: :) |
| 13:16.32 | l403 | persistent uniform resource locator (PURL) |
| 13:16.39 | l403 | :) |
| 13:29.08 | gmzhuo | Hi,1403 |
| 13:33.40 | *** join/#openezx CIA-28 (n=CIA@208.69.182.149) |
| 13:34.40 | gmzhuo | at |
| 13:34.52 | gmzhuo | :( |
| 13:40.41 | *** join/#openezx rwhitby (n=rwhitby@nslu2-linux/rwhitby) |
| 13:45.18 | l403 | hi. sry googling. |
| 13:46.39 | gmzhuo | Hi,1403,witch phone dose you have? |
| 13:50.50 | l403 | I does hav the a780 |
| 13:52.02 | l403 | Ok, I'll keep it english.. I do have the A780 |
| 13:55.04 | l403 | with no mods done yet. |
| 13:55.51 | l403 | just the Qonsole ( I know I shouldn't use it anymore) |
| 13:56.06 | l403 | ..and thst not even a mod |
| 13:56.37 | l403 | have the Bluez too but have some dir placement issues |
| 14:00.03 | gmzhuo | I hope another one test e6 or e2 or a1200 :) |
| 14:02.59 | *** join/#openezx johanbr (n=j@JBrannlund2.MathStat.Dal.Ca) |
| 14:31.16 | yang | gmzhuo: E6 looks nice |
| 14:31.17 | *** join/#openezx tombhadAC (n=tombhad@pD95DDB64.dip.t-dialin.net) |
| 14:33.01 | gmzhuo | Hi,yang,dose you mean bp works on your E6? |
| 14:33.03 | yang | only 1 E6 on ebay.de |
| 14:33.13 | yang | No, I am just looking |
| 14:33.20 | yang | hjas A780 |
| 14:33.24 | gmzhuo | :) |
| 14:34.18 | gmzhuo | I don't know how about WyrM hacks bp on A1200 |
| 14:34.55 | gmzhuo | On my E6,I still have to change drivers/usb/core/hub.c |
| 14:35.11 | yang | what does "bp" refer to? |
| 14:37.43 | gmzhuo | Baseband processor |
| 14:38.50 | yang | is waiting for the OM builds, it will some more time |
| 14:47.47 | *** join/#openezx WM (i=c88e3a12@gateway/web/ajax/mibbit.com/x-84adde68f0bc69bd) |
| 14:47.55 | gmzhuo | Hi,WM, |
| 14:48.04 | WM | hi gmzhuo |
| 14:48.06 | WM | :) |
| 14:48.39 | gmzhuo | I still need change hub.c to enum bp device?how about your A1200? |
| 14:48.51 | WM | not needed. |
| 14:49.10 | gmzhuo | :( |
| 14:49.12 | WM | the trick was to delay UP3OCR write until after the handshake. |
| 14:49.26 | WM | if you still need it, just commit it to git. |
| 14:50.23 | gmzhuo | Maybe related to bp software version |
| 14:51.40 | WM | yes, i had some issues with check_poweroff on some e680 units, others works just fine. |
| 14:51.42 | gmzhuo | Let it keep in my local,wait for see how about other E6 |
| 14:51.49 | WM | even with the same model, there are some differences. |
| 14:52.23 | WM | gmzhuo: im ok to go with the most compatible way, so even if the change affects just some e6 its ok. |
| 14:53.02 | WM | gmzhuo: and about BP dying issue... |
| 14:53.08 | WM | have you found anything else? |
| 14:53.29 | WM | it dies on a1200 too, just after it starts, there is a bp_rdy interrupt and it dies. |
| 14:54.08 | gmzhuo | Have you opened all mux0~8? |
| 14:54.22 | WM | im using ezxd. |
| 14:54.29 | WM | i dont remember which mux it opens. |
| 14:55.47 | gmzhuo | need open mux0~8 to keep bp active |
| 14:56.24 | WM | yes, it opens from mux0 to mux8 |
| 14:56.35 | WM | but it still dies. :/ |
| 14:57.12 | WM | it dies with a -62 error on ts0710_mux_usb.c |
| 14:57.28 | gmzhuo | don't know why |
| 14:57.31 | WM | i dont remember the exact message, i will upload a dmesg log after. |
| 14:59.15 | gmzhuo | I use a out of date sim card,bp keep works 1 hour and power drains |
| 15:15.15 | ao2 | WM, a780 camera is going better http://people.openezx.org/ao2/a780-slightly-better.jpg but I haven't found out a complete solution |
| 15:15.22 | ao2 | yet |
| 15:23.44 | SuN | Finally, a portal to the matrix! |
| 15:23.45 | SuN | Heh |
| 15:33.31 | *** join/#openezx ade|desk (n=adavey@195.153.131.254) |
| 15:38.23 | WM | ao2: toggling gpio tc_mm_en (iirc its 89 on a780) removes the vertical bars? |
| 15:39.04 | WM | also, try it with bp working, according to the comments on motorola 2.4 there is a clock from the bp connected somehow to the camera. |
| 15:39.41 | WM | SuN: lol, it indeed looks like matrix. :) |
| 15:51.24 | ao2 | WM, that picture is with BP in normal mode and GPIO99 toggled, let me try GPIO89, I've read that different A780 versions have different line for TC_MM_EN (what the name stands for, btw?) |
| 16:13.27 | *** join/#openezx l403 (n=l@85.132.159.231) |
| 16:29.47 | WM | ao2: i dont know, but its a _en (enable), MM can be multimedia, TC may be T??? clock, so probably something related with enable multimedia clock :) |
| 16:32.13 | *** join/#openezx CIA-28 (n=CIA@208.69.182.149) |
| 17:26.37 | *** join/#openezx bartv (n=magick@demands.xs4all.nl) |
| 17:36.38 | *** join/#openezx CIA-30 (n=CIA@208.69.182.149) |
| 18:25.31 | *** join/#openezx bartv (n=magick@demands.xs4all.nl) |
| 18:29.17 | *** part/#openezx ade|desk (n=adavey@195.153.131.254) |
| 18:35.36 | *** join/#openezx pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 19:06.48 | *** join/#openezx droebje (n=quirc@92.116.158.10) |
| 19:32.40 | *** join/#openezx WyrM (n=wyrm@20158146182.user.veloxzone.com.br) |
| 20:16.57 | tmzt | WyrM: heh, so that worked on one phone but not the others? |
| 20:36.50 | WM | tmzt: what? |
| 20:37.01 | WM | the bp stuff? or the camera stuff? :) |
| 20:37.24 | *** join/#openezx BadCluster (n=badclust@190.51.105.108) |
| 20:37.30 | *** part/#openezx BadCluster (n=badclust@190.51.105.108) |
| 20:37.34 | WM | its normal, there are multiple baseband firmware versions, and they behave a little different. |
| 20:59.46 | ao2 | WM, I'm playing with gpiotool on 2.4 to see if I get a clue about camera setup |
| 21:00.09 | tmzt | WM: the delaying UP3OCR write (bp stuff) |
| 21:00.38 | tmzt | WM: (reading back) |
| 21:25.13 | *** join/#openezx droebje (n=quirc@92.116.66.123) |
| 21:25.57 | droebje | hi |
| 21:27.35 | droebje | strokes? anyone!ne |
| 21:28.30 | droebje | -!ne |
| 21:28.37 | tmzt | WM: well this is (somewhat) interesting, I get NO CARRIER immediately on atdNUMBER; when the phone was off in ce, but it doesn't seem to have shutdown the bp(msm) chip |
| 21:29.21 | tmzt | that's what my simple msm based phones do when I do at from the bootloader |
| 21:30.14 | droebje | ms ... m? |
| 21:31.37 | droebje | tmzt? which kernel? image? |
| 21:32.15 | tmzt | on cdma phone (moto q) |
| 21:33.10 | tmzt | msm is the qualcomm baseband chip family |
| 21:34.04 | droebje | thanks |
| 21:34.51 | droebje | well, get an A780 :) |
| 21:35.32 | tmzt | I never got ming, as it was hard to get here (import only), only on gsm and doesn't have keyboard |
| 21:35.46 | tmzt | I guess a780 is the touchscreen with gps? |
| 21:37.40 | *** join/#openezx l403 (n=l@85.132.159.231) |
| 22:09.03 | SuN | http://android-dls.com/forum/index.php?f=15&t=151&rb_v=viewtopic oh my |
| 22:10.30 | stefan_schmidt | SuN: heh, nice :) |
| 22:11.12 | SuN | It was quite inevitable, I guess. |
| 22:12.21 | stefan_schmidt | SuN: yeah |
| 22:12.33 | stefan_schmidt | SuN: Still a lot open questions for me around G1 |
| 22:12.59 | SuN | Yeah, does anyone in "our" community already own one? |
| 22:13.21 | SuN | It seems nobody has really taken it apart, even just in software. |
| 22:16.10 | stefan_schmidt | SuN: Nobody I know. |
| 22:16.38 | stefan_schmidt | SuN: I still would like to know if they only allow signed kernels, etc. I'm pretty sure that yes. |
| 22:16.52 | SuN | Yeah, that sort of stuff interests me as well. |
| 22:18.19 | stefan_schmidt | SuN: We will have to wait until somebody really takes it apart |
| 22:18.26 | SuN | Yep |
| 22:18.36 | SuN | I might get one, but I'm waiting until the prices get deflated. |
| 22:18.44 | SuN | ~$500 on Ebay currently |
| 22:19.19 | stefan_schmidt | SuN: You are from .nl right? |
| 22:19.24 | SuN | Yep |
| 22:19.48 | stefan_schmidt | SuN: Wasn't it you whom I gave a A780 battery at the CCC congress? |
| 22:20.01 | SuN | So... add $50 shipping and above all that... 19% Mwst. |
| 22:20.07 | SuN | Nope, I wasn't at the congress. |
| 22:20.21 | stefan_schmidt | SuN: ok, then I mixed this up somehow |
| 22:21.13 | stefan_schmidt | Not sure if I like to get one. Depends if I'm able to flash a own kernel + rootfs without much trouble. I have enough phones for hacking :) |
| 22:22.46 | tmzt | stefan_schmidt: is it possible to dump ram with an anon mmap then? |
| 22:22.49 | SuN | I'm not sure yet... the machine has quite a "first attempt" look, if you ask me. But I've been waiting for a phone with this kind of functionality (say.. any HTC phone) that doesn't run Windows Mobile for a long time. |
| 22:23.28 | stefan_schmidt | tmzt: no idea |
| 22:23.50 | SuN | Though a MotoQ with openezx sounds nice too. |
| 22:24.18 | tmzt | yeah, we need the mux protocol next and to get it in ezx.c |
| 22:24.23 | tmzt | (maybe) |
| 22:25.01 | stefan_schmidt | tmzt: Making good progress? |
| 22:25.22 | tmzt | msm modem is on usb host, with the code from drwyrm that works |
| 22:25.49 | tmzt | but only one interface is an at command interface and it doesn't seem to support voice at commands |
| 22:26.12 | stefan_schmidt | tmzt: Ah, that is pretty good already |
| 22:48.02 | *** join/#openezx flo_lap (n=fuchs@f048225040.adsl.alicedsl.de) |
| 23:25.02 | *** join/#openezx l403 (n=l@85.132.159.231) |
| 23:25.09 | WyrM | hi |
| 23:29.02 | stefan_schmidt | hi WyrM |
| 23:29.30 | stefan_schmidt | WyrM: How was the birthday party? |
| 23:30.54 | WyrM | stefan_schmidt: no party this year :) |
| 23:31.03 | stefan_schmidt | WyrM: :( |
| 23:31.17 | stefan_schmidt | WyrM: but I would not have been able to come anyway. ;) |
| 23:31.45 | WyrM | lol, it's indeed a little far ;) |
| 23:32.26 | stefan_schmidt | yeah |
