| 00:17.58 | tmzt | WyrM: what do I ezx_pcap_write to enable v6? |
| 00:18.18 | WyrM | you don't. |
| 00:18.25 | WyrM | use the vreg helper function. |
| 00:18.33 | tmzt | ok, where is vreg_table |
| 00:19.15 | WyrM | ezx_pcap_set_vreg(V6, V_EN, 1); |
| 00:19.37 | tmzt | in ezx_pcap_init ? |
| 00:20.13 | WyrM | yes, it may be. |
| 00:20.45 | WyrM | but later you will probably want to implement some sysfs control to power off/on the bluetooth chip |
| 00:21.20 | tmzt | yeah, will probably use odeviced to do that and I'll need a sysfs entry |
| 00:21.51 | tmzt | anyway, I'm going to test this and then I need to tg update (on master?)? |
| 00:22.32 | WyrM | tg update is to update higher patches on stack against changes on lower patches. |
| 00:22.49 | WyrM | to update from upstream you git pull. |
| 00:23.08 | WyrM | commit every work you have done. |
| 00:24.30 | WyrM | then: git checkout ezx/current && tg update && git pull && tg remote --populate origin && tg update |
| 00:25.03 | WyrM | this should update your tree agains git.openezx.org and do all the merging for you. |
| 00:25.34 | WyrM | then send me a patch generated with 'tg patch' so I can decide how to include on openezx.git. |
| 00:26.08 | tmzt | ok, I am trying to clean up the keymap with all the conflicting notes |
| 00:26.37 | tmzt | and should we have ezx_ functions in motoq.c? I am trying to understand why there is generic ezx stuff in the machine file |
| 00:27.20 | WyrM | if you used too many ezx_* functions maybe we should include motoq inside ezx.c? |
| 00:27.51 | tmzt | we don't know if it has eoc yet? |
| 00:28.24 | WyrM | np, a780 and e680 don't have eoc :) |
| 00:28.54 | tmzt | how are you going to be able to enable multiple machines like upstream if they conflict in one file? |
| 00:29.04 | tmzt | change everything to _is_machine? |
| 00:29.05 | WyrM | a910 and e2 don't have touch screen, a780 and a910 don't have fm, etc... |
| 00:29.39 | WyrM | all the differences are on ezx.c just compare each _init() function :) |
| 00:30.13 | tmzt | you can have multiple MACHINE_STARTS in one .c file? |
| 00:30.37 | WyrM | and, we are using multiple machine support, you can set the machid with boot_usb and the kernel will behave completelly different |
| 00:30.42 | WyrM | yes you can. |
| 00:34.59 | tmzt | the video timings are right, I can take all the other junk out |
| 00:35.07 | *** join/#openezx gmzhuo (n=gmzhuo@125.69.9.171) |
| 00:35.30 | WyrM | hi gmzhuo |
| 00:37.18 | gmzhuo | Hi,Wyrm, |
| 00:41.03 | *** join/#openezx gmzhuo- (n=gmzhuo@125.69.9.171) |
| 00:41.55 | gmzhuo | Wyrm,Have bp worked on a1200? |
| 00:45.00 | WyrM | gmzhuo: I stoped trying. |
| 00:45.09 | WyrM | had to do some changes on asoc. |
| 00:45.44 | WyrM | by the way, I couldn't get bp audio to work, continue the development if you want. |
| 00:46.24 | gmzhuo | I have updated rtc.patch again,only alarm don't tested |
| 00:51.04 | *** join/#openezx Wyr1 (n=wyrm@20158172089.user.veloxzone.com.br) |
| 00:56.23 | *** join/#openezx sabrod__ (n=mac@lns-bzn-61-82-250-116-168.adsl.proxad.net) |
| 01:09.06 | tmzt | WyrM: setserial /dev/ttyS1: UART: undefined, Port 0x0000, IRQ: 21 |
| 01:12.26 | WyrM | pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART |
| 01:13.09 | tmzt | pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART |
| 01:13.09 | tmzt | pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART |
| 01:13.09 | tmzt | pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART |
| 01:13.14 | tmzt | yes |
| 01:13.49 | tmzt | I don't have bt modules loaded/copied though, I'm working on that after the tg finishes |
| 01:17.45 | WyrM | http://pastebin.com/m427dd419 (on a780, bluetooth power is controlled by BP) |
| 01:18.04 | WyrM | I also don't have the modules setup, but you can see that the chip was found by hciattach |
| 01:18.33 | gmzhuo | WyrM,bp sound works |
| 01:18.44 | tmzt | oh, I had radio off (phone) and it might have done something on usb3, but I only got that once |
| 01:19.05 | WyrM | root@a780:~# echo -e "at+ebtp=0\r\n" > /dev/mux4 |
| 01:19.06 | WyrM | OK |
| 01:19.06 | WyrM | root@a780:~# hciattach /dev/ttyS1 bcm2035 460800 flow 01:02:03:04:05:06 |
| 01:19.06 | WyrM | Initialization timed out. |
| 01:19.06 | WyrM | (with bluetooth power off) |
| 01:19.09 | WyrM | gmzhuo: congrats. |
| 01:19.15 | WyrM | gmzhuo: any changes needed? |
| 01:19.23 | gmzhuo | not need |
| 01:19.47 | WyrM | good, any trick, or necessary order to setup stuff? |
| 01:19.57 | WyrM | or you simply change the mixer control? |
| 01:19.59 | gmzhuo | First I dial 10086 faield, |
| 01:20.19 | gmzhuo | then I excute AT+EPOM=1,0 |
| 01:20.33 | gmzhuo | then I can dial 10086(the service) |
| 01:20.42 | sabrod__ | hehe! good news!! :D |
| 01:20.50 | WyrM | what does EPOM do? |
| 01:20.51 | gmzhuo | I turn bp audio though alsamixer |
| 01:21.00 | gmzhuo | turn op bp audio |
| 01:21.18 | gmzhuo | I can hear voice from 10086 |
| 01:21.19 | WyrM | ahh, so I think that's why it won't woked here. |
| 01:21.54 | gmzhuo | EPOM is login into GSM network,I think |
| 01:22.31 | WyrM | I don't need it on my a780 |
| 01:22.45 | WyrM | and I still don't get audio. |
| 01:23.02 | gmzhuo | Maybe bp do it itself on a780? |
| 01:23.07 | WyrM | gmzhuo: can you check if it works if you leave the mixer control on BP, and dial after? |
| 01:23.23 | gmzhuo | Ok |
| 01:24.08 | WyrM | gmzhuo: and, are the output mixer controls right for E6? eg, loudspeaker is loudspeaker, earpiece and handset? |
| 01:27.58 | gmzhuo | yes ,all is right,but headset is mono when phone call |
| 01:28.37 | WyrM | gmzhuo: mono you mean it plays only on right headset speaker? |
| 01:29.04 | gmzhuo | yes |
| 01:29.12 | WyrM | you can change the Downmixer control, I think it will play on both speakers. |
| 01:29.34 | gmzhuo | BP LOWERED WDI,:( |
| 01:29.36 | WyrM | are you using ezxd? |
| 01:29.59 | gmzhuo | opentapi |
| 01:30.07 | WyrM | bp will lower wdi if it talks to you on MUX and you don't read() from it. |
| 01:31.21 | gmzhuo | opentapi keep read |
| 01:31.47 | WyrM | see dmesg for errors. |
| 01:32.02 | gmzhuo | let me try again |
| 01:36.33 | gmzhuo | always in right |
| 01:37.43 | gmzhuo | maybe I should keep send at |
| 01:37.54 | WyrM | ok, I will add another route to turn on the left speaker when Downmixer is set to 2ch->1ch |
| 01:40.04 | gmzhuo | Maybe there has some error in ts0710_mux_usb.c |
| 01:44.10 | WyrM | still no sound with the mixer control on a780 :/ |
| 01:45.47 | WyrM | gmzhuo: can you please "cat /sys/bus/spi/devices/spi1.0/regs" while in the middle of a call with sound? |
| 01:45.50 | WyrM | and send to me? |
| 01:46.58 | WyrM | ahh, by the way, 'echo "<register in decimal> <value in hexa>" > /sys/bus/spi/devices/spi1.0/regs' works as a write. |
| 01:47.04 | WyrM | good to debug ;) |
| 01:47.31 | tmzt | on PCAP? |
| 01:47.37 | WyrM | yes. |
| 01:48.05 | gmzhuo | <4>nonzero read bulk status received: -62 |
| 01:48.05 | gmzhuo | <4>nonzero write bulk status received: -62 |
| 01:48.05 | gmzhuo | <4>unlink urb err, -43WM: get_dai 2 |
| 01:48.12 | WyrM | you can also cat reg > ~/regs_backup and cat ~/regs_backup > regs |
| 01:48.45 | WyrM | s/cat reg >/cat regs >/ |
| 01:49.34 | WyrM | gmzhuo: check your battery level if suddenly bp refuses to work. |
| 01:50.24 | WyrM | my a780 is fine with bp working for almost half an hour |
| 01:52.12 | gmzhuo | adc battery 556 |
| 01:53.11 | WyrM | I don't know the low threshold :) |
| 01:53.15 | WyrM | still have to test. |
| 01:53.23 | WyrM | my batt is at 583 |
| 01:54.31 | WyrM | ahh, on a780 I can charge the battery on OpenEZX. |
| 01:54.36 | WyrM | :) |
| 01:55.13 | WyrM | root@a780:~# echo -e "AT+USBSTAT=255,1\r\n" > /dev/mux4 |
| 01:55.40 | WyrM | adc_battery at 625 now :) |
| 01:55.45 | gmzhuo | control by bp? |
| 01:55.46 | WyrM | nice. |
| 01:56.03 | WyrM | yes, on a780 and e680 bp controls battery charging. |
| 01:56.41 | tmzt | would there be some reason why tg update would repeat the same things? |
| 01:57.01 | WyrM | tmzt: yes, it merges trees recursively. |
| 01:57.22 | WyrM | it will repeat for each branch on the chain when you update from master. |
| 01:57.33 | WyrM | this takes some time :) |
| 01:57.55 | gmzhuo | WyrM how can I send your regs? |
| 01:58.05 | WyrM | pastebin. |
| 01:58.41 | WyrM | or you can paste in private to me if you have identified to nickserv. |
| 02:00.20 | gmzhuo | Can you accept file through irc? |
| 02:00.23 | WyrM | dcc don't work if any of us uses NAT. |
| 02:00.28 | WyrM | I use nat here. |
| 02:00.40 | gmzhuo | I use too |
| 02:01.36 | gmzhuo | http://people.openezx.org/gmzhuo/regs.txt |
| 02:01.52 | WyrM | thanks |
| 02:04.33 | gmzhuo | regs from pcap? |
| 02:04.43 | WyrM | yes |
| 02:05.33 | WyrM | something (probably BP) is changing regs here. |
| 02:12.43 | WyrM | hum. |
| 02:12.58 | WyrM | I can hear some noise when call is active and bp dai is selected. |
| 02:13.04 | WyrM | but far from sound :/ |
| 02:17.12 | gmzhuo | How about it when use 2.6.24.x? |
| 02:22.08 | gmzhuo | fogot my nickserv password,oops |
| 02:32.19 | *** join/#openezx Wyr1 (n=wyrm@20158152172.user.veloxzone.com.br) |
| 02:34.26 | WyrM | got audio on a780 now. |
| 02:34.48 | WyrM | with: |
| 02:34.48 | WyrM | 13 00000000 |
| 02:34.48 | WyrM | 26 00200910 |
| 02:34.48 | WyrM | 12 0008e901 |
| 02:34.48 | WyrM | 11 00003005 |
| 02:36.49 | gmzhuo | diffrent from GEN2 completely |
| 02:37.05 | WyrM | hum. |
| 02:37.23 | WyrM | write these values to a file |
| 02:37.33 | WyrM | and cat it to pcap regs sysfs file. |
| 02:37.48 | WyrM | tell me what happens on gen2 with this values. |
| 02:37.54 | gmzhuo | Ok |
| 02:39.07 | WyrM | ahh, with this values sound is from the earpiece. |
| 02:40.10 | WyrM | after writing the values once, I can just select th BP dai on alsamixer. |
| 02:41.23 | WyrM | so, I just forgot some setting on the code. |
| 02:42.05 | WyrM | and it doesn't matter the order, I can leave BP selected and do the call later, good |
| 02:44.43 | WyrM | lol. |
| 02:44.54 | WyrM | this is too easy with the controls setup like that. |
| 02:45.12 | *** mode/#openezx [+o WyrM] by ChanServ |
| 02:45.54 | *** topic/#openezx by WyrM -> #openezx OpenEZX Developer Lounge -- BP Audio works on a mixer control. -- http://openezx.org |
| 02:46.07 | *** mode/#openezx [-o WyrM] by WyrM |
| 02:47.27 | stefan_schmidt | re |
| 02:47.31 | stefan_schmidt | reads backlog |
| 02:48.00 | stefan_schmidt | The channel title is already promising :) |
| 02:48.54 | stefan_schmidt | WyrM: great news. :) |
| 02:49.17 | stefan_schmidt | WyrM: Charging and audio on BP :) |
| 02:49.34 | stefan_schmidt | And all over mixer controls |
| 02:49.57 | stefan_schmidt | Really great news |
| 02:50.27 | WyrM | charging works on gen1 because of mux. |
| 02:51.12 | stefan_schmidt | WyrM: yeah, this magic command we thought it was to disable watchdog in the beginning :) |
| 02:51.51 | stefan_schmidt | WyrM: Please put all the infos in a mail when you find time. Especially how to use it from userspace |
| 02:52.26 | WyrM | stefan_schmidt: you enter alsamixer and change it. |
| 02:52.31 | stefan_schmidt | WyrM: We will release FSO MS4 early next week and hopefully have some time afterwards to integrate the EZX stuff |
| 02:53.01 | stefan_schmidt | WyrM: I thought more in direction of mixer control names, etc |
| 02:53.15 | stefan_schmidt | WyrM: CAn find that out myself, no worries :) |
| 02:53.40 | stefan_schmidt | WyrM: On the openmoko devices we have alsa state files for the different audio setups |
| 02:53.53 | stefan_schmidt | WyrM: load them with alsactl rstore, etc |
| 02:54.37 | *** join/#openezx gmzhuo- (n=gmzhuo@125.69.9.171) |
| 02:54.59 | stefan_schmidt | Anyway, 4am here. I'm really tired. Need to catchup tomorrow with all the goodies :) |
| 02:55.21 | WyrM | stefan_schmidt: gn, see you tomorrow. :) |
| 02:55.30 | stefan_schmidt | WyrM: Let me thank you once again for keeping OpenEZX alive :) |
| 02:55.52 | stefan_schmidt | will test charging and an audio call tomorrow |
| 02:56.48 | stefan_schmidt | falls asleep |
| 03:02.27 | WyrM | gmzhuo-: up 1:26, BP still working on a780 |
| 03:03.06 | WyrM | no null pointer panic here. |
| 03:04.58 | WyrM | but I will reboot now, need to test another image ;) |
| 03:06.10 | tmzt | WyrM: I'm on ezx/current and git pull needs a refspec |
| 03:15.42 | WyrM | tmzt: ezx/current |
| 03:16.09 | WyrM | assert that 'tg info' shows up to date before pulling. |
| 03:16.18 | tmzt | that didn't work, remote end hung up |
| 03:17.18 | WyrM | its ok, you can also generate the patch against your old tree, and I figure how to merge it :) |
| 03:24.45 | tmzt | tg update shows changes to drivers/char/ts0710_mux_usb, I can't see how it got those without pulling? |
| 03:25.00 | tmzt | oh, that got cut off |
| 03:25.21 | WyrM | try to pull agai |
| 03:25.34 | tmzt | tg update is running now |
| 03:25.36 | WyrM | s/i/in/ |
| 03:26.14 | tmzt | I need to fix Kconfig and get the dep on EZX_PXA back in there |
| 03:27.22 | *** join/#openezx LoneStar (n=xinzhen@114.92.179.21) |
| 03:35.58 | *** join/#openezx the_mgt (n=ich@dslb-082-083-236-187.pools.arcor-ip.net) |
| 03:58.09 | gmzhuo- | Wyrm,are you still here? |
| 03:58.23 | WyrM | yes |
| 03:58.37 | gmzhuo- | I know what wrong with bp on E6 now |
| 03:58.45 | WyrM | what? |
| 03:59.20 | gmzhuo- | You set ap rdy irq as falling |
| 04:00.32 | gmzhuo- | But seems don't reach it on E6 here:( |
| 04:01.18 | WyrM | check the gpio on the platform data. |
| 04:01.25 | WyrM | I may have mistyped it. |
| 04:01.57 | WyrM | what irq type it is on e6? |
| 04:03.40 | gmzhuo- | RDY IS ALWAYS RISING |
| 04:04.15 | WyrM | gmzhuo-: phones are different :) |
| 04:04.45 | WyrM | ap_rdy is not even called ap_rdy on a780 and e680 |
| 04:05.48 | gmzhuo- | call on e6 before on e6 |
| 04:05.58 | WyrM | ? |
| 04:06.09 | gmzhuo- | no ap-rdy now on e6 |
| 04:07.04 | WyrM | I don't understand what you want to say. |
| 04:08.06 | gmzhuo- | I mean there has ap-rdy interupt period, |
| 04:08.23 | gmzhuo- | but now there has no ap-rdy interrupt at all |
| 04:08.38 | gmzhuo- | I cat /proc/interrupts,ap rdy is 0 |
| 04:08.39 | WyrM | yeah, there is no ap_rdy |
| 04:09.01 | WyrM | no ap_rdy interrupt. |
| 04:09.13 | gmzhuo- | bp rdy ,my mistake |
| 04:09.15 | WyrM | aren't you mistyping Bp_rdy as Ap_rdy? |
| 04:09.18 | WyrM | ahh |
| 04:10.20 | WyrM | <PROTECTED> |
| 04:10.28 | gmzhuo- | it's right |
| 04:10.36 | WyrM | <PROTECTED> |
| 04:10.42 | WyrM | set to gpio in. |
| 04:10.46 | gmzhuo- | but no interrupt for it |
| 04:11.09 | WyrM | <PROTECTED> |
| 04:11.27 | WyrM | it should trigger always. falling or rising. |
| 04:11.34 | WyrM | so your problem is something else :) |
| 04:12.46 | gmzhuo- | Yes,but before there has bp rdy irq:( |
| 04:13.12 | gmzhuo- | and ap keep touching with bp,bp will not dead |
| 04:13.48 | WyrM | there are bp_rdy interrupts here on a780. |
| 04:15.34 | gmzhuo- | Here On e6 hand shake success when probe,and no bp rdy interrupts anymore |
| 04:17.12 | WyrM | and, does not starting handshake() at probe fixes the issue? |
| 04:17.50 | WyrM | by changing to "if (step < 3) handshake();" |
| 04:22.56 | WyrM | weird, I can no longer set the memory setup with the CMDLINE. |
| 04:23.11 | WyrM | it panics before lcd init (white screen) |
| 04:23.57 | gmzhuo- | <PROTECTED> |
| 04:24.14 | WyrM | what's this? |
| 04:24.24 | WyrM | gpio configuration? what does it mean? |
| 04:24.37 | WyrM | or it's the interrupt counter? |
| 04:24.45 | gmzhuo- | interrupt counter |
| 04:28.35 | WyrM | <PROTECTED> |
| 04:28.43 | WyrM | booted just now. |
| 04:31.12 | gmzhuo- | any more interrupt? |
| 04:31.28 | WyrM | no, still at 1. |
| 04:32.01 | WyrM | bp still responsive. |
| 04:32.18 | WyrM | I will call the phone. |
| 04:32.26 | WyrM | this way it interrupts ap. |
| 04:32.59 | WyrM | <PROTECTED> |
| 04:33.11 | WyrM | everything is normal here. |
| 05:33.23 | gmzhuo- | no error again :9 |
| 05:37.53 | gmzhuo- | hi,WyrM |
| 07:42.28 | *** join/#openezx l403 (n=l@85.132.159.231) |
| 07:46.37 | *** join/#openezx borman999 (n=quassel@ppp91-76-106-147.pppoe.mtu-net.ru) |
| 08:44.08 | *** join/#openezx rastafarra (n=rastafar@77.79.182.236.dynamic.ufanet.ru) |
| 08:45.31 | *** join/#openezx tombhadAC (n=tombhad@pD95DF49F.dip.t-dialin.net) |
| 09:20.44 | *** join/#openezx pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 09:58.49 | *** join/#openezx l403 (n=l@85.132.159.231) |
| 09:59.39 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 11:09.59 | ghane | good morning |
| 14:21.19 | *** join/#openezx WyrM (n=wyrm@20158159058.user.veloxzone.com.br) |
| 14:23.57 | *** join/#openezx tombhadAC (n=tombhad@pD95DF49F.dip.t-dialin.net) [NETSPLIT VICTIM] |
| 14:23.57 | *** join/#openezx sabrod__ (n=mac@lns-bzn-61-82-250-116-168.adsl.proxad.net) [NETSPLIT VICTIM] |
| 14:29.16 | WyrM | hi |
| 14:36.15 | ao2 | hi WyrM |
| 14:38.18 | ao2 | I tried the latest code, the use of predefined audio scenarios is neat indeed, we don't need to mess with controls individually. But if I use "mplayer -vo alsa" and after that "mplayer -vo oss" the driver doesn't work anymore |
| 14:39.39 | WyrM | ao2: anything on dmesg? |
| 14:39.39 | ao2 | and, isn't there mic recording yet? |
| 14:39.58 | WyrM | ao2: I don't tested the mic. |
| 14:40.22 | ao2 | WyrM, there are messages, wait a minute and I'll replicate the test |
| 14:40.46 | WyrM | but it should be working, loudspeaker and earpiece will record from the builtin mic, headset from the headset mic. |
| 14:40.56 | WyrM | and you need to select the Mono Dai. |
| 14:42.02 | WyrM | is bp audio working for you? |
| 14:42.10 | WyrM | here it has problems some times. |
| 14:42.14 | WyrM | silence. |
| 14:43.34 | ao2 | ok, it could be that I had stereo DAI. about bp, I am just building a 2.6.25 kernet with MTD support to put gen-blob on flash, no I have't tested BP scenario yet, it only produced noise with BP in reflash mode. |
| 14:44.05 | WyrM | ok. |
| 14:44.36 | WyrM | im still trying to figure out what bit I forgot to toggle. |
| 14:46.37 | WyrM | ahh, for the record, if you leave "output Mode" on anything other than "Off" or "Dai Select" on "BP" your battery will drain :) |
| 14:49.26 | ao2 | WyrM, mplayer tells me: "[AO OSS] audio_setup: driver doesn't support SNDCTL_DSP_GETOSPACE :-(" |
| 14:49.44 | ao2 | and on dmesg I get "asoc: can't set codec PCAP2 hw params" |
| 14:50.02 | WyrM | which dai? |
| 14:50.06 | ao2 | this with Mono |
| 14:50.10 | WyrM | and which audio format ? |
| 14:50.42 | WyrM | mono will only work with one channel, 8000 or 16000 rate. |
| 14:51.23 | ao2 | ah ok. I recorded a file with "arecord -Dplug:hw -f cd" and I tryed to play it |
| 14:53.26 | WyrM | the recording works. |
| 14:53.43 | WyrM | but mono codec playing not, even with the right rate/channel. :/ |
| 14:54.56 | ao2 | "arecord -Dplug:hw -r 16000 -c 1 file.wav" |
| 14:55.11 | ao2 | works and the file can be player with Mono DAI too |
| 14:55.23 | ao2 | but it is noisy with stereo DAI |
| 14:56.13 | WyrM | I can't play it on the mono dai. |
| 14:56.37 | ao2 | mplayer plays it fine |
| 14:56.51 | WyrM | and I confirm the noise when playing on the stereo dai. |
| 14:57.10 | WyrM | will test the file on my host, to see if the recording or the playback is wrong. |
| 14:57.58 | ao2 | would it be possible to do automatic DAI selection based on data format? |
| 14:58.39 | WyrM | ao2: I can try to do it. |
| 14:58.56 | WyrM | but the stereo dai supports everything that the mono dai does except recording. |
| 14:59.40 | ao2 | ah ok |
| 14:59.41 | WyrM | and something is wrong at the recording, the file plays with noise on my host. |
| 15:00.42 | ao2 | yes, same for me |
| 15:03.34 | ao2 | for others tha are willing to test: you can setup opkg feeds on recent opnmoko images with this script http://rafb.net/p/QFQmn943.html |
| 15:04.31 | ao2 | so you can install mplayer, alsa-utils and so on |
| 15:09.26 | gmzhuo- | WyrM,have saw the oop msg http://people.openezx.org/gmzhuo/oopsmsg-2008-11-02.txt? |
| 15:10.39 | WyrM | gmzhuo-: what were you doing when you got that? |
| 15:10.43 | WyrM | nothing? |
| 15:10.54 | WyrM | or reading from adc_*? |
| 15:11.13 | gmzhuo- | do nothing |
| 15:11.40 | WyrM | I will need to improve adc handling. |
| 15:12.01 | gmzhuo- | when phonecall,and no adc read |
| 15:12.02 | WyrM | probably BP asked for the conversion, and the interrupt arrived on the AP. |
| 15:12.13 | gmzhuo- | I think so |
| 15:12.21 | WyrM | ahh, so you were doing something :) |
| 15:12.48 | gmzhuo- | I said when phonecall,no adc read |
| 15:12.53 | WyrM | so bp may ask for an adc conversion during calls. |
| 15:13.51 | gmzhuo- | I think this is the reson why bp dead too |
| 15:14.21 | WyrM | but on your log there is BP I/O even after the panic. |
| 15:14.35 | WyrM | I don't think this is the cause for bp dying. |
| 15:15.02 | gmzhuo- | Maybe pcap can't be access by bp and ap at same time,so bp found sth wrong with pcap,and die |
| 15:17.32 | WyrM | gmzhuo-: no way. |
| 15:17.45 | gmzhuo- | has anybody test it on E2? |
| 15:17.50 | WyrM | gmzhuo-: pcap CAN be accessed by both processors at the same time, no problems. |
| 15:18.54 | WyrM | but something is wrong with interrupt sel. |
| 15:18.58 | WyrM | I mean.. |
| 15:19.13 | WyrM | there are 2 interrupts for adc, one is for BP another for AP. |
| 15:19.38 | WyrM | the BP interrupt should not be seen by AP. |
| 15:19.42 | WyrM | but it is :/ |
| 15:20.17 | CIA-20 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * r253164a7c3 10openezx/drivers/mfd/ezx-pcap.c: check for adc_done() before calling it. Solves a panic if BP asks for adc conversion. |
| 15:21.04 | WyrM | gmzhuo-: update, and if you see "printk(KERN_ERR "I havent asked for ADC! Maybe BP? Ignoring\n");" send the pcap regs dump to me :) |
| 15:21.30 | WyrM | so I can fix the source of this problem. |
| 15:21.54 | gmzhuo- | I have fix it on my local :) |
| 15:22.18 | WyrM | gmzhuo-: then add a message on your tree, so you can see when it happens. |
| 15:22.26 | WyrM | and dump the pcap registers to me. |
| 15:22.39 | WyrM | this is not a proper fix, the source of the interrupt to ap has to be fixed. |
| 15:22.44 | gmzhuo- | It's not always happens |
| 15:24.08 | WyrM | also, before it happens, I hope you haven't messed with pcap debug writes. |
| 15:24.28 | WyrM | a write to PCAP_INT_SEL may be the source of this problem. |
| 15:25.10 | WyrM | hum. |
| 15:25.34 | WyrM | I think I found already what is wrong... ezx_pcap_write(PCAP_REG_INT_SEL, 0); |
| 15:25.39 | WyrM | err. :/ |
| 15:25.53 | WyrM | it is redirecting BP adc conversions to AP :/ |
| 15:26.10 | gmzhuo- | where it is from ? |
| 15:28.15 | WyrM | gmzhuo-: and thinking better, this may be the cause for BP dying. |
| 15:28.15 | CIA-20 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * ref3bd46a72 10openezx/drivers/mfd/ezx-pcap.c: dont redirect ADCDONE2 interrupts to AP, they belong to BP. |
| 15:28.38 | WyrM | it asks for an adc conversion, pcap never responds back, and it give up and die. |
| 15:29.38 | WyrM | please update and try, you should never get spurious adc interrupts on AP with this change :) |
| 15:30.53 | gmzhuo- | updating |
| 15:33.25 | gmzhuo- | Do you think it cause bp dead too? |
| 15:33.41 | WyrM | I don't know BP firmware. |
| 15:33.48 | WyrM | but yes, it is possible. |
| 15:34.05 | WyrM | it asks for the conversion, never get a reply and die because of it. |
| 15:34.30 | WyrM | it may be asking for battery level, gets no reply, thinks the battery is empty... who knows ;) |
| 15:35.24 | WyrM | these issues don't happen on gen1, because on gen1 BP is responsible for INT_SEL. |
| 15:35.24 | gmzhuo- | We can only guess :) |
| 15:35.37 | WyrM | but on gen2 the AP cares for INT_SEL. |
| 15:37.52 | gmzhuo- | dead still |
| 15:37.56 | gmzhuo- | bp dead |
| 15:38.04 | WyrM | same panic? |
| 15:38.32 | WyrM | or the "ignoring" message? |
| 15:38.49 | WyrM | or nothing? |
| 15:38.58 | gmzhuo- | no oops message |
| 15:39.55 | gmzhuo- | bp disconnected |
| 15:40.20 | WyrM | bp reboot for some unknown reason. |
| 15:40.37 | WyrM | when trying a sound call? |
| 15:41.12 | gmzhuo- | yes |
| 15:41.50 | WyrM | have you got the adc ignore message? |
| 15:42.06 | WyrM | or you don't have a printk to show the exception? |
| 15:43.16 | gmzhuo- | no |
| 15:43.31 | WyrM | no message? or you don't have a printk? :) |
| 15:44.12 | gmzhuo- | no adc ignore message |
| 15:44.18 | WyrM | good. |
| 15:44.20 | gmzhuo- | have this |
| 15:44.22 | gmzhuo- | <6>EOC INTS: BATTPON |
| 15:44.22 | gmzhuo- | <6>EOC: write 32: 00000800 |
| 15:44.22 | gmzhuo- | <6>EOC: read 32: 00000800 |
| 15:44.22 | gmzhuo- | <6>EOC: read 33: 00000000 |
| 15:44.22 | gmzhuo- | <6>EOC INTS: BATTPON |
| 15:44.37 | WyrM | unrelated. |
| 15:44.47 | gmzhuo- | and this <4>Reading max 2025 bytes from ts0710_mux_usb inbuf. |
| 15:44.47 | gmzhuo- | <4>nonzero read bulk status received: -104 |
| 15:44.47 | gmzhuo- | <4>nonzero read bulk status received: -62 |
| 15:44.47 | gmzhuo- | <4>nonzero write bulk status received: -62 |
| 15:44.47 | gmzhuo- | <4>unlink urb err, -43 |
| 15:45.01 | gmzhuo- | what's mean of battpon? |
| 15:45.13 | WyrM | this is bp dying. |
| 15:45.29 | WyrM | im not sure yet, need to review eoc. |
| 15:45.34 | gmzhuo- | But I care BATTPON two |
| 15:45.57 | gmzhuo- | if batt have some problem,then bp knows and .... |
| 15:46.06 | WyrM | eoc is unrelated to bp, there is no physical connection BP<->EOC |
| 15:46.19 | WyrM | bp don't know about battery on gen2. |
| 15:46.30 | WyrM | only what it can read on adc_* |
| 15:48.22 | gmzhuo- | Why so many BATTPON interrupt,so many |
| 15:50.25 | gmzhuo- | replace my batt |
| 15:51.57 | gmzhuo- | deadagain |
| 15:53.03 | gmzhuo- | How can I comment out <4>Read 22 bytes. |
| 15:53.03 | gmzhuo- | <4>Reading max 2026 bytes from ts0710_mux_usb inbuf. |
| 15:53.03 | gmzhuo- | <4>Reading max 2048 bytes from ts0710_mux_usb inbuf. |
| 15:53.10 | gmzhuo- | this debug message? |
| 15:53.40 | gmzhuo- | it's too many and can't see other msg :( |
| 15:59.09 | *** join/#openezx Wyr1 (n=wyrm@20158172035.user.veloxzone.com.br) |
| 15:59.29 | *** join/#openezx borman999 (n=quassel@ppp91-76-106-147.pppoe.mtu-net.ru) |
| 16:07.45 | gmzhuo | see bp rdy irq now |
| 16:08.24 | WyrM | what was wrong? |
| 16:08.35 | gmzhuo | don't know |
| 16:08.57 | gmzhuo | bp dead after change alsamixer |
| 16:09.24 | WyrM | so, it's the audio setup. |
| 16:09.36 | WyrM | try to change alsamixer only after you are on a call. |
| 16:09.52 | gmzhuo | I'll go to bed now |
| 16:10.09 | WyrM | gmzhuo: ok, gn. |
| 16:10.10 | WyrM | :) |
| 16:10.21 | gmzhuo | bye all |
| 16:11.35 | gmzhuo | Wyrm,If you make bp works on A1200,you can debug more :) |
| 16:19.34 | l403 | I found a magnetic spot on the a780. do you know what it is? |
| 16:19.58 | WyrM | l403: flip? |
| 16:20.34 | l403 | you mean the mechanism? |
| 16:20.43 | WyrM | the sensor |
| 16:20.56 | l403 | oh! |
| 16:21.06 | l403 | :-) thats cool |
| 16:29.29 | *** join/#openezx pleemans (n=toi@d54C2AAB7.access.telenet.be) |
| 16:53.32 | ao2 | l403, I use it to hold the pen and type with fingers |
| 16:54.26 | l403 | thats how I found outt abouot it. It perfectly holds the stylus |
| 16:54.58 | ao2 | cool, isn't it? :) |
| 16:55.09 | l403 | yep |
| 16:55.26 | l403 | wouldnt it be funny tto compile boinc for te phhone? |
| 16:55.52 | WyrM | boinc? |
| 16:57.09 | l403 | http://en.wikipedia.org/wiki/Boinc |
| 16:58.16 | l403 | it has been ported to some phone already. I dont know which one, maybe iPhone |
| 17:50.04 | ao2 | ok, I have BP on flash now, WyrM I am going to test phone call on A780. I can do that with ezxd, can't I? |
| 18:49.26 | WyrM | ao2: yes. |
| 18:49.49 | WyrM | but I don't remember how to use ezxd, so im just killing it and catting on mux0 :) |
| 18:54.30 | *** join/#openezx droebje (n=quirc@92.117.142.88) |
| 19:12.04 | WyrM | ao2: phone calls works for you? |
| 19:55.36 | tmzt | WyrM: ok, that finshed now and I am back on branch motoq, but git log only shows my changes. ezx.c had the ohci stuff and a new layout and it reverted when I checkout my branch |
| 19:56.29 | WyrM | tmzt: tg info shows up to date? |
| 19:56.39 | WyrM | if no you probably need to tg update. |
| 19:57.39 | tmzt | Depends: ezx/pcap |
| 19:57.39 | tmzt | <PROTECTED> |
| 19:57.39 | tmzt | Needs update from: |
| 19:57.39 | tmzt | ezx/pcap (444/376 commits) |
| 19:57.39 | tmzt | ezx/eoc (443/375 commits) |
| 19:57.53 | WyrM | tg update |
| 19:58.04 | WyrM | it will take long with all these commits :) |
| 19:58.31 | WyrM | also, I see that you don't depend on all ezx patches |
| 19:58.56 | WyrM | so, you probably don't have all the code on ezx.c |
| 19:59.09 | WyrM | but it shouldn't matter if you used motoq.c |
| 20:06.05 | CIA-20 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * r024ad7ec5a 10openezx/sound/soc/codecs/pcap2.c: cleanup |
| 20:14.14 | tmzt | WyrM: I run tg update on my branch? |
| 20:14.25 | WyrM | yes |
| 20:17.38 | *** join/#openezx webmind (i=webmind@shell.puscii.nl) |
| 20:20.39 | CIA-20 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * r579b8e0f6b 10openezx/sound/soc/codecs/ (pcap2.c pcap2.h): according to Mark Brown this workaround is no longer needed on mainline |
| 20:25.16 | WyrM | I can't get our kernel to work with 48mb of ram again :/ |
| 20:25.35 | tmzt | WyrM: ok, that worked but ezx.c is still mostly empty |
| 20:25.37 | WyrM | even removing the fixup and setting the memory layout from the cmdline. |
| 20:25.54 | WyrM | tmzt: its because your patchset don't depend on ezx/current |
| 20:26.04 | WyrM | you depend only on ezx/pcap and ezx/eoc changes. |
| 20:26.17 | WyrM | do you want to depend on our whole patchset? |
| 20:27.00 | tmzt | I can only see that I have a different .cs for pcap, different keyboard layout, and need VREGAUX* disabled |
| 20:27.21 | WyrM | git checkout <your patch name> |
| 20:27.22 | WyrM | vim .topdeps (remove ezx/* and add ezx/current) |
| 20:27.22 | WyrM | git add -f .topdeps |
| 20:27.22 | WyrM | git commit |
| 20:27.22 | WyrM | tg update |
| 20:27.40 | WyrM | good, so your code will probably be merged inside ezx.c |
| 20:27.54 | tmzt | if vregs where in a platform_data, would I then only need to declare that? |
| 20:28.02 | WyrM | vregaux is not needed as disabled. |
| 20:28.12 | WyrM | you have to implement proper mmc vdd handling. |
| 20:28.32 | tmzt | I have a detect gpio for the card |
| 20:28.37 | WyrM | then you don't depend on wince powering up the card to you. |
| 20:29.56 | WyrM | very likely you can use one vdd handling already implemented on ezx.c |
| 20:30.03 | WyrM | is your card slot full SD? or micro? |
| 20:30.10 | tmzt | mini |
| 20:30.15 | WyrM | hum.. |
| 20:30.22 | tmzt | but I use micro cards |
| 20:30.24 | WyrM | there are no mini sd cards on ezx phones. |
| 20:30.40 | WyrM | try with the SD code (e680 and E6) |
| 20:30.43 | tmzt | I think there are two extra pins on minisd, but I don't have one |
| 20:31.12 | WyrM | if it don't work, try the microSD implementation (a1200, a780, a910, e2). |
| 20:31.55 | WyrM | or check the pcap dump after booting with haret. |
| 20:32.06 | WyrM | to see what voltage regulator on pcap is used. |
| 20:32.41 | WyrM | its on the AUXVREG register, check what bits are on against the vreg_table on ezx-pcap.c |
| 21:14.04 | *** join/#openezx rwhitby` (n=rwhitby@au1.astc-design.com) |
| 22:06.00 | CIA-20 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * r00ceff7b07 10openezx/sound/soc/codecs/pcap2.c: forbi capturing from the stereo dai |
| 22:06.11 | CIA-20 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * r026c8c6fde 10openezx/sound/soc/codecs/pcap2.c: dont allow opening the dai if it is set to bp. |
| 22:20.57 | CIA-20 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * re5e7c7de6c 10openezx/sound/soc/ (codecs/pcap2.c pxa/ezx.c): cleanup |
| 22:21.09 | CIA-20 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * r0eccf1f730 10openezx/sound/soc/pxa/ezx.c: cleanup |
| 22:21.09 | CIA-20 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * r925bda5919 10openezx/sound/soc/ (codecs/pcap2.c pxa/ezx.c): update my (c) |
| 22:37.21 | WyrM | damn, asoc still not 32bit safe :/ |
| 22:40.13 | tmzt | it sees a usb device |
| 22:40.52 | tmzt | has an invalid interface number 4, but max is 3 |
| 22:41.25 | tmzt | and now I get illegal uarts is an undefined |
| 22:45.29 | tmzt | WyrM: oh, that was setserial getting run, I think |
| 22:53.54 | tmzt | manufacture: Motorola, Inc. product: Q2 CDMA Baseband |
| 22:54.04 | WyrM | where? |
| 22:54.33 | tmzt | 22b8:2a6f |
| 22:54.41 | tmzt | in /sys/bus/usb/devices/3-1 |
| 22:55.11 | tmzt | I didn't plug in by usb cord so I need to reboot to get lsusb installed |
| 22:55.21 | tmzt | I also have vregs |
| 22:55.25 | tmzt | I also have pcap regs |
| 22:56.33 | WyrM | good, now you need to figure out the protocol it uses ;) |
| 22:57.00 | tmzt | your ts0710_mux_usb didn't see anything, but that might be vend/prod? |
| 22:57.21 | WyrM | I don't think its TS0710. |
| 22:57.29 | tmzt | wince calls it usbipc |
| 23:01.16 | CIA-20 | OpenEZX: 03Daniel Ribeiro <drwyrm@gmail.com> 07ezx/current * rdb50947d49 10openezx/sound/soc/codecs/ (pcap2.c pcap2.h): revert commit 579b8e0f6bfa16e06d9b4ca20adb3e1a871a63a4 |
| 23:14.57 | *** join/#openezx florian (n=fuchs@f049191155.adsl.alicedsl.de) |
| 23:34.41 | tmzt | WyrM: http://pastebin.com/f1af4c0d7 |
| 23:38.23 | WyrM | ezx is 22b8:3006 |
| 23:38.38 | WyrM | the BP processor on ezx. |
| 23:39.04 | tmzt | I think one of the interfaces is qualcomm diag |
| 23:39.16 | tmzt | but I don't know what TCMD or MUX are |
| 23:39.31 | WyrM | hum.. |
| 23:41.00 | tmzt | I have ttyUSB1 ttyUSB2 ttyUSB3 with usbserial vendor= product= |
| 23:41.40 | WyrM | wow, good. |
| 23:42.02 | WyrM | anything on these tty? |
| 23:42.13 | tmzt | I think they tried to make it as much like a cdma card as possible |
| 23:42.27 | tmzt | installing minicom |
| 23:42.35 | tmzt | do you know what TCMD protcol would be? |
| 23:43.39 | WyrM | google may have the answer :) |
| 23:43.50 | WyrM | found some references on razr forums. |
| 23:45.39 | tmzt | usb3: .A.T. .S.7.=.4.5. .S.0.=.0. .L.1. .V.1. .X.4. .&.c.1. .E.1. .Q |
| 23:45.52 | WyrM | hahaha, that was easy :) |
| 23:46.01 | tmzt | what is that? |
| 23:46.06 | tmzt | and no response to AT cmds |
| 23:46.16 | WyrM | its at. |
| 23:46.35 | WyrM | looks unicode AT. |
| 23:47.40 | WyrM | AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q |
| 23:48.15 | tmzt | yeah, but minicom sends commands when it starts |
| 23:48.42 | WyrM | so, is this from minicom? configure it so it send nothing. |
| 23:49.13 | tmzt | yeah, that's the init, clearing it |
| 23:53.02 | tmzt | it's echoing after I type, delayed |
| 23:55.51 | tmzt | whoa, usb0 is normal at |
| 23:56.09 | tmzt | Manufacturer: I: Motorola CE, Copyright 2000 |
| 23:56.09 | WyrM | wow, this is great. |
| 23:56.09 | tmzt | Model: I: Motorola CDMA Q2 Phone |
| 23:56.09 | tmzt | Revision: I: q2-bp_c_06.0b.13s |
| 23:56.09 | tmzt | ESN: I: 0x1BC43D43 |
| 23:56.09 | tmzt | +GCAP: +CIS707-A, CIS-856, +MS, +ES, +DS, +FCLASS |
| 23:56.11 | tmzt | OK |
| 23:56.18 | tmzt | the lsusb says data interface |
| 23:56.19 | WyrM | congrats! |
| 23:56.46 | WyrM | that's great that motoq is standard. |
| 23:56.52 | WyrM | now I would go for sound. |
| 23:57.07 | tmzt | I don't know how to turn on the modem though (the phone part) |
| 23:57.07 | WyrM | and test an audio call. |
| 23:57.39 | WyrM | maybe it is already set by wince? |
| 23:57.49 | tmzt | atdt#777 |
| 23:57.52 | tmzt | CONNECT |
| 23:58.34 | tmzt | so, atdtNUMBER; ? |
| 23:58.42 | WyrM | atd <number> |
| 23:58.44 | tmzt | atdNUMBER; ? |