| 01:55.18 | *** join/#openezx gmzhuo (n=gmzhuo@118.112.101.53) |
| 01:56.03 | gmzhuo | in kernel of moto P3_3 is only as one of gpio out signal,not in usb host fuction |
| 02:35.24 | CIA-26 | OpenEZX: wyrm * r2267 /trunk/src/blob/gen-blob/ (include/blob/mmc.h src/blob/boot_modes.c src/blob/mmc.c): |
| 02:35.24 | CIA-26 | OpenEZX: cleanup |
| 02:35.24 | CIA-26 | OpenEZX: improve mmc driver speed |
| 02:35.24 | CIA-26 | OpenEZX: be even more cautious about mmc_exit |
| 02:59.39 | *** join/#openezx FosforoEee (n=Fosforo@20151124245.user.veloxzone.com.br) |
| 06:03.57 | *** join/#openezx drath_ (i=vmaster@p5B07FB41.dip.t-dialin.net) |
| 07:13.43 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 07:27.24 | *** join/#openezx pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 07:30.05 | *** join/#openezx flyhorse|linux (n=flyhorse@219.130.57.4) |
| 08:09.20 | *** join/#openezx PermBan (n=SuN@82-170-225-106.ip.telfort.nl) |
| 08:36.22 | ao2 | mmh, I think I have half-bricked my A780, I just did "dd if=kernel-2.4 of=/dev/mtd1" with CONFIG_MTD_EZX_A780, is it possible that it has overwritten some part of the bootloader? I am not able to flash it anymore... |
| 08:36.28 | ao2 | ezxflash says: |
| 08:36.40 | ao2 | Sending loader... |
| 08:36.40 | ao2 | Incorrect BIN answer |
| 08:36.40 | ao2 | Unable to send loader at a0200000 |
| 08:38.18 | ao2 | and even with the darl windows tools I can't flash it. But I can still boot using boot_usb... should I try to flash the kernel again with dd? |
| 08:38.26 | ao2 | s/darl/dark |
| 08:41.16 | ao2 | WyrM, do you think I should try to flash gen-blob anyway? |
| 09:04.46 | *** join/#openezx gmzhuo (n=gmzhuo@118.112.101.53) |
| 09:17.12 | shonnon | If you can boot using boot_usb, you didn't clobber the bootloader. The various reflashing tools are pretty careful to keep that mtd partition read-only... |
| 09:19.56 | ao2 | shonnon, now I reflashed the original kernel to mtd1 using mtd-utils. And I can power on the phone with the power button, but I get only garbage on the screen, let's see if now it can be reflashed |
| 09:20.16 | ao2 | see you later |
| 09:56.04 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 09:57.48 | ao2 | ok, phone restored |
| 09:59.14 | *** join/#openezx pH5 (n=ph5@p5485D797.dip.t-dialin.net) |
| 10:08.57 | *** join/#openezx |dion| (n=dion@inhex.net) |
| 10:15.14 | *** join/#openezx flyhorse|linux (n=flyhorse@219.130.57.4) |
| 10:21.16 | *** join/#openezx flo_lap (n=fuchs@g227178020.adsl.alicedsl.de) |
| 10:25.20 | *** join/#openezx rettich-schnidi (n=reto@157-155.203-62.cust.bluewin.ch) |
| 11:29.24 | *** join/#openezx dion (n=dion@inhex.net) |
| 12:12.26 | *** join/#openezx dion (n=dion@inhex.net) |
| 12:50.58 | *** join/#openezx florian_ (n=fuchs@e179107209.adsl.alicedsl.de) |
| 13:01.45 | *** join/#openezx flyhorse|linux (n=flyhorse@59.37.201.27) |
| 13:17.55 | *** join/#openezx respawn (n=spawn@eminescu.rdsor.ro) |
| 13:21.59 | *** join/#openezx zhuogm (n=gmzhuo@118.112.101.53) |
| 14:02.14 | yangvnc | I have attached A780 to an usb cable it mounts as /dev/sdc1 246912 22304 224608 10% /media/8203562D01 |
| 14:02.54 | yangvnc | now I am wondering how to create the partitions on a transflash card |
| 14:03.10 | yangvnc | I am looking at http://wiki.openezx.org/Getting_Started_A780#Creating_the_Partitions |
| 14:04.04 | yangvnc | is /dev/sdc1 allready a card or is it internal memory? |
| 14:07.09 | yangvnc | actually |
| 14:07.14 | yangvnc | 2 partitions are now visible |
| 14:07.17 | yangvnc | /dev/sdd1 242M 22M 220M 10% /media/8203562D01 |
| 14:07.17 | yangvnc | /dev/sdb1 40M 18M 23M 45% /media/MOTO_A780 |
| 14:07.45 | yangvnc | I would guess that /dev/sdd1 refers to the card, as the card is 256MB |
| 14:11.03 | *** join/#openezx FosforoEee (n=Fosforo@20151124245.user.veloxzone.com.br) |
| 14:18.20 | *** part/#openezx shonnon (n=keithr@c-67-182-140-86.hsd1.wa.comcast.net) |
| 14:18.57 | yangvnc | ok I made 2 partitions on /dev/sdd1 ... http://www.pastebin.sk/en/7345/ |
| 14:19.34 | yangvnc | but i am unable to make the filesystem |
| 14:23.22 | ao2 | yangvnc, I think you shoud create paritions in /dev/sdd and not in /dev/sdd1. After the patitoining you must have /dev/sdd1 and /dev/sdd2 and create filesystems there |
| 14:24.27 | ao2 | and be sure /dev/sdd is your card on the phone before proceeding (I have lost some data in the past... :)) |
| 14:25.50 | yangvnc | ok |
| 14:25.57 | yangvnc | well |
| 14:26.13 | yangvnc | I have 256MB card and I assume that 40Mb is internal memory of the A780 |
| 14:26.41 | ao2 | looks ok |
| 14:27.40 | yangvnc | the first partition which is FAT what is it used for and how big must it be, I would like to save the most size for ext2 partition |
| 14:29.55 | yangvnc | ao2: could you tell me? |
| 14:31.24 | yangvnc | /dev/sdc1 1 77 19696 83 Linux |
| 14:31.24 | yangvnc | /dev/sdc2 78 965 227328 83 Linux |
| 14:31.44 | yangvnc | will 20MB of the /dev/sdc1 FAT be enough? |
| 14:31.57 | ao2 | it depends, if you have a A780 with GPS you may want to store copilot maps on the FAT partition, if not then it can be a lot smaller |
| 14:32.31 | yangvnc | yes, i do have gps |
| 14:33.22 | ao2 | so maybe 20MB are too few if you want to use the card also for copilot. |
| 14:34.39 | yangvnc | mke2fs /dev/sdc2 |
| 14:34.39 | yangvnc | mke2fs 1.40.8 (13-Mar-2008) |
| 14:34.39 | yangvnc | Could not stat /dev/sdc2 --- No such file or directory |
| 14:34.39 | yangvnc | The device apparently does not exist; did you specify it correctly? |
| 14:34.48 | yangvnc | i made the first one |
| 14:35.23 | ao2 | generally speaking you want to keep in the FAT all the data you want to access from the original software. And you will have there also the Kernel if you plan to use gen-blob to achieve multiboot |
| 14:35.51 | yangvnc | nd_request: I/O error, dev sdc, sector 494072 |
| 14:35.51 | yangvnc | Buffer I/O error on device sdc, logical block 61759 |
| 14:36.33 | ao2 | /dev/sdc? you told it was /dev/sdd before, Well you may have unplugged something else. |
| 14:36.59 | yangvnc | i unplugged and it came back as /dev/sdc (previously sdd) |
| 14:37.11 | ao2 | I have sme problems accessing external flash in storage mode with linux-2.6.25 on the desktop, previous kernels worked fine |
| 14:39.21 | yangvnc | sd 5:0:0:1: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK |
| 14:39.21 | yangvnc | sd 5:0:0:1: [sdc] Sense Key : Medium Error [current] |
| 14:39.21 | yangvnc | sd 5:0:0:1: [sdc] Add. Sense: No additional sense information |
| 14:39.21 | yangvnc | end_request: I/O error, dev sdc, sector 494072 |
| 14:40.03 | yangvnc | I have wired the phone over USB cable and in between some sort of an motorola usb cable |
| 14:40.31 | yangvnc | I don't know what this motorola usb cable is used for it looks like some kind of extension |
| 14:43.08 | yangvnc | ok , finally i made the ext2 fs |
| 14:43.24 | yangvnc | there are some strange errors in dmesg appearing however |
| 14:52.35 | yangvnc | ao2: could you assist me on the final step http://wiki.openezx.org/Getting_Started_A780#3._Boot_the_kernel |
| 14:53.11 | yangvnc | it says turn off the card, how is that done, do i need to take it out of the mobile? |
| 14:53.54 | ao2 | who is saying to turn off the card? |
| 14:54.09 | yangvnc | please check the link |
| 14:55.05 | ao2 | reading, sorry |
| 14:55.31 | ao2 | the doc means to turn off the phone |
| 14:55.42 | yangvnc | ok |
| 14:56.07 | ao2 | have you compiled boot_usb already? |
| 14:56.43 | yangvnc | no |
| 14:56.46 | yangvnc | i mean yes |
| 14:56.54 | yangvnc | i downloaded the boot_usb file to my pc |
| 14:57.19 | yangvnc | I can find the jog dial button, which one is the camera button? |
| 14:57.43 | ao2 | on the opposite side |
| 14:57.55 | yangvnc | ok |
| 15:00.22 | yangvnc | it booted up, thanks for the hints! |
| 15:01.13 | ao2 | you're welcome |
| 15:01.49 | yangvnc | now i just need to setup GUI |
| 15:02.00 | yangvnc | i was dropped on to the tty login for now |
| 15:06.13 | yangvnc | i have downloaded http://www.angstrom-distribution.org/unstable/images/a780/Angstrom-base-image-glibc-ipk-2007.12-a780.rootfs.tar.gz |
| 15:07.45 | yangvnc | so i guess this is only accesible over a ssh shell |
| 15:07.48 | yangvnc | from pc |
| 15:07.57 | yangvnc | but there is no guide on networking |
| 15:09.15 | ao2 | just a minute |
| 15:09.23 | ao2 | there's a guide on the openmoko wiki |
| 15:09.31 | ao2 | I'm searching the link |
| 15:10.56 | yangvnc | Is there a way to upgrade the X on base image, or is it better to reflash with an allready made Openmoko/X11 image? |
| 15:10.57 | ao2 | http://wiki.openmoko.org/wiki/USB_Networking |
| 15:14.19 | yangvnc | ok |
| 15:14.20 | ao2 | that rootfs is old, indeed, but currently I don't know where to get a newer one already built. we are still using console during development. Anyway, once you have network connection on the phone you can use ipkg to install/update some more software. Just a difference with the mentioned wiki page, I use opendns servers on the phone. |
| 15:14.21 | yangvnc | works |
| 15:14.42 | yangvnc | but which is the default root password? |
| 15:14.54 | ao2 | no password |
| 15:15.24 | yangvnc | it doesnt work |
| 15:15.29 | yangvnc | without password |
| 15:15.36 | ao2 | if it doesn't work than the rootfs is broken. I use an even older one, wait a sec |
| 15:16.31 | yangvnc | no it seems that i ran out of battery |
| 15:19.03 | yangvnc | got to plug the device now into my car |
| 15:19.16 | yangvnc | to charge for an hour |
| 15:20.43 | ao2 | I also had problems with ssh and some Angstrom images |
| 15:24.37 | *** join/#openezx rettich-schnidi (n=reto@157-155.203-62.cust.bluewin.ch) |
| 15:27.07 | *** join/#openezx flyhorse (n=flyhorse@59.37.201.27) |
| 15:33.06 | WyrM | ao2: phew, that was close ;) |
| 15:42.25 | *** join/#openezx gmzhuo (n=gmzhuo@118.112.101.53) |
| 15:42.28 | ao2 | eh, is it so wrong to use dd instead of flashcp? |
| 15:44.50 | WyrM | ao2: flashcp will verify the data after writing, so you wont reboot the phone if something went wrong. |
| 15:45.33 | WyrM | and it will check sizes, etc.. it is always good to be sure that the data will actually fit the partition ;) |
| 15:46.23 | WyrM | gmzhuo: hi. |
| 15:46.28 | gmzhuo | Hi |
| 15:46.50 | gmzhuo | have you tested on you A1200? |
| 15:47.21 | WyrM | not yet, i will check it now. |
| 15:48.57 | gmzhuo | How about the sound card driver now? |
| 15:49.48 | WyrM | gmzhuo: there are changes to asoc on your patch too? i missed that. |
| 15:50.41 | gmzhuo | No,no,no |
| 15:50.48 | WyrM | gmzhuo: i will not test your whole patch, as it doesnt respect the other phones, i was going to strip only the ezx-bp.patch changes and test it :) |
| 15:51.16 | WyrM | thats why you should always send smaller patches, with code related to a single stuff at a time. |
| 15:52.02 | gmzhuo | I was just want to know if the sound system work well on E6/A1200 |
| 15:52.45 | gmzhuo | You know I try every thing about it, so there is a lot of gabage :) |
| 15:53.15 | WyrM | gmzhuo: yes, the sound works on my a1200, but something is wrong with the mixer. |
| 15:54.00 | WyrM | the openmoko startup sound looks like it will blow the phone speakers as it is veeery loud. |
| 15:54.01 | gmzhuo | As you can see I add the orignal PCAP register init int E6,because doubt if it affect the work of BP |
| 15:54.34 | WyrM | gmzhuo: it should not, but restoring all the registers is always a bad stuff to do. |
| 15:55.10 | *** join/#openezx flyhorse|linux (n=flyhorse@219.130.83.142) |
| 15:55.20 | WyrM | you can even burn your pxa with a wrong SW1 setting, be very cautious about pcap. |
| 15:55.29 | *** join/#openezx flyhorse (n=flyhorse@219.130.83.142) |
| 15:55.39 | gmzhuo | Before it work,all things is possible |
| 15:56.55 | gmzhuo | I have made the pcap can't read the battery,but now it restore !!!it read the battery OK now! |
| 15:57.16 | flyhorse | when i build arm-linux for e6 it say arch/arm/mach-pxa/pxa27x.c:149: error: 'pxa27x_device_udc' undeclared here (not in a function) |
| 15:57.32 | gmzhuo | So I have two E6 now!!! |
| 15:57.45 | gmzhuo | One for test,one for use |
| 15:57.51 | WyrM | flyhorse: run git-branch and assert you are on the "pxa" branch. |
| 15:58.10 | WyrM | flyhorse: if you are on the pxa branch, run a "git-pull -f" |
| 15:58.13 | flyhorse | in arm-linux menu ? |
| 15:58.16 | flyhorse | o |
| 15:58.43 | WyrM | flyhorse: dont forget to "quilt pop -a" before updating the upstream arm-linux git. |
| 15:59.25 | flyhorse | o thx |
| 16:25.06 | ao2 | yangvnc, I am still using this old rootfs http://www.angstrom-distribution.org/unstable/images/a780/20071207/ the openmoko-image or the console-image. And ssh works here. |
| 16:26.43 | flyhorse | 0.o |
| 16:33.30 | CIA-26 | OpenEZX: wyrm * r2268 /branches/linux-2.6-arm/ (pxa27x-udc-no-up2ocr-mangling.patch series): |
| 16:33.30 | CIA-26 | OpenEZX: comment out fix-undeclared-pxa-device-udc.patch |
| 16:33.30 | CIA-26 | OpenEZX: add pxa27x-udc-no-up2ocr-mangling.patch (already sent via linux-usb) |
| 16:36.29 | CIA-26 | OpenEZX: wyrm * r2269 /branches/linux-2.6-arm/ezx-common.patch: refresh |
| 16:36.46 | CIA-26 | OpenEZX: wyrm * r2270 /branches/linux-2.6-arm/ezx-pcap.patch: |
| 16:36.46 | CIA-26 | OpenEZX: rename some defines |
| 16:36.46 | CIA-26 | OpenEZX: refresh |
| 16:37.00 | *** join/#openezx florian (n=fuchs@e179107209.adsl.alicedsl.de) |
| 16:37.11 | CIA-26 | OpenEZX: wyrm * r2271 /branches/linux-2.6-arm/ezx-mci.patch: refresh |
| 16:41.29 | CIA-26 | OpenEZX: wyrm * r2272 /branches/linux-2.6-arm/ (pxa27x-udc-seos-to-3-bits.patch series): add pxa27x-udc-seos-to-3-bits.patch |
| 16:43.12 | CIA-26 | OpenEZX: wyrm * r2273 /branches/linux-2.6-arm/ (5 files): cleanup - delete patches that are already upstream |
| 17:40.51 | yangvnc | ao2: thanks i am gonna reflash with that |
| 17:41.12 | yangvnc | ao2: do you know how to turn off the phone from the linux mode, the power button won't work |
| 17:41.59 | WyrM | yangvnc: remove the battery ;) |
| 17:42.52 | yangvnc | ok but how, i mean is there a button which needs to be pressed to lift the battery cover? |
| 17:43.07 | yangvnc | it seems somehow fixed, i dont want to force it |
| 17:43.14 | WyrM | which phone? |
| 17:43.20 | yangvnc | a780 |
| 17:43.58 | WyrM | press the button below the VR button (the lower most button on the left side) |
| 17:44.08 | WyrM | and push down the battery cover. |
| 17:44.16 | yangvnc | thaanks |
| 17:49.18 | yangvnc | ao2: which one do you got rootfs.tar.gz or rootfsjjfs2 ? |
| 17:50.54 | ao2 | tar.gz |
| 18:10.25 | yangvnc | wow this openmoko has a really nice interface |
| 18:12.17 | yangvnc | i am just tryingo to figure how to power off the phone from there |
| 18:12.34 | yangvnc | or do i need to take out battery each time? |
| 18:16.24 | WyrM | yangvnc: on a780 the power button is connected to the BP. |
| 18:16.42 | yangvnc | ok got into power manager with jog/camera button , shuted down from there |
| 18:16.53 | yangvnc | BP? |
| 18:17.05 | WyrM | it warns the AP about the button press via a message from the modem. |
| 18:17.21 | WyrM | AP = the main processor BP = modem. |
| 18:17.54 | yangvnc | ok |
| 18:18.16 | yangvnc | in the menus, where i have clicked on ALL appications |
| 18:18.30 | yangvnc | I get a scroll tab on the right side, but i cannot scroll down on it |
| 18:37.20 | yangvnc | ao2: it also doesnt provide me a ssh login or a telnet login |
| 18:37.56 | WyrM | yangvnc: which kernel are you using? 2.6.25? |
| 18:38.46 | WyrM | yangvnc: can you ping 192.168.0.202? 2.6.25 is configured to 192.168.0.202 and expects the host to be at 192.168.0.200 |
| 18:39.32 | yangvnc | i have booted with zImage-2.6.23.1-ezxdev into a Angstrom-openmoko-image-glibc-ipk-2007.9-test-20071207-a780.rootfs.tar.gz |
| 18:40.01 | yangvnc | whoops, so that IP must be exactly that, I have chosen my own ip, let me try again |
| 18:40.37 | WyrM | see if usb0 is active on ifconfig, and set-up the ips on the host side to what you configured on the kernel cmdline. |
| 18:41.10 | WyrM | or pass a cmdline via boot_usb to match what your host expects. |
| 18:41.48 | yangvnc | ok i did exactly accoring to the manual, I am in now |
| 18:41.55 | yangvnc | with those IPs |
| 18:42.27 | yangvnc | to enable gsmd...I must follow this manual http://wiki.openezx.org/Call |
| 18:42.42 | yangvnc | the SIM card doesnt register by itself |
| 18:42.50 | WyrM | if host and device are with the ips properly configured then you just ssh to the device ip. |
| 18:43.10 | WyrM | gsmd will not work with OpenEZX (and probably will never be fixed) |
| 18:43.48 | yangvnc | so, can i make the calls or not? |
| 18:44.42 | WyrM | yangvnc: no, you cant. :) |
| 18:44.46 | yangvnc | oh |
| 18:44.48 | WyrM | yangvnc: but I can ;) |
| 18:45.07 | yangvnc | I thought it was supported according to the status page |
| 18:45.20 | WyrM | yangvnc: kernel wise, it is supported. |
| 18:45.43 | WyrM | yangvnc: but you will find no userspace talking what exactly what our kernel wants. |
| 18:46.23 | WyrM | beside that, there is no way to talk with BP via boot_usb on a stock phone, you have to flash gen-blob. |
| 18:46.29 | yangvnc | ok, so i can sit and wait, untill its coded in to the stable version |
| 18:48.08 | WyrM | yangvnc: mickeyl is working on openmoko (fso) integration. wait some time and it will be easy to use. |
| 18:48.20 | yangvnc | ok its not a problem, i am glad i got this far |
| 18:48.56 | yangvnc | you know this A780 doesnt power the battery over the USB cable... |
| 18:49.23 | WyrM | yangvnc: why not? mine does charge the battery when usb is connected. |
| 18:49.41 | WyrM | or are you talking about OpenEZX charging the battery? |
| 18:49.49 | yangvnc | i do have some sort of a motorola usb cable but its on one side plug in - then its some sort of a switch, then its usb out, which i plug on the phone, i wonder what it serves for |
| 18:50.30 | yangvnc | WyrM: hm, funny but my phone always runs out of battery, when its connected by usb cable |
| 18:50.40 | yangvnc | i can chartge it on a car adapter only |
| 18:50.40 | WyrM | ahh, different cable, that explains why you cant charge :) |
| 18:51.30 | yangvnc | you see i wonder why does that motorola cable serves for... plugging in a normal usb cable will also work to connect to the phone |
| 18:55.21 | yangvnc | And if I open applications in openmoko, i get a tiny line down, which i cannot scroll |
| 18:55.57 | yangvnc | maybe too many newbie questions for today, eh? |
| 18:57.01 | WyrM | OpenMoko ui issues are off-topic here, #OpenEZX is about the kernel :) |
| 18:57.10 | yangvnc | ok i will ask there |
| 18:57.26 | WyrM | i cant help you with openmoko, altough i think that these issues are probably alredy fixed. |
| 18:57.42 | WyrM | you are using an old rootfs, as ao2 already pointed you. |
| 18:59.19 | WyrM | yangvnc: for a 0-day setup you will need to set-up openembedded, and compile everything by yourself, it is a somewhat complex task. |
| 19:51.35 | *** join/#openezx Ikkebr (n=ikkibr@189-72-1-112.smace700.dsl.brasiltelecom.net.br) |
| 20:34.13 | *** join/#openezx rettich (n=reto@234-142.203-62.cust.bluewin.ch) |
| 20:39.51 | CIA-26 | OpenEZX: wyrm * r2274 /trunk/src/blob/gen-blob/src/blob/ (bl_cmds_handler.c boot_modes.c usb_ctl.c): |
| 20:39.51 | CIA-26 | OpenEZX: only touch udc if running on usb mode |
| 20:39.51 | CIA-26 | OpenEZX: turn off the udc before passing control to kernel |
| 20:48.58 | ao2 | WyrM, can you clarify me if gen-blob should be compiled for the specific machine-id of the target phone? I guess that's needed to support the newer code |
| 20:50.13 | WyrM | ao2: no, we can use the boot_usb trick for setting the machine id when sending the kernel via boot_usb, or use a configuration option when booting from the mmc. |
| 20:50.39 | ao2 | so the machid goes in menu.lst, fine |
| 20:51.12 | WyrM | ao2: just managed to get mainline pxa27x_udc working. |
| 20:51.17 | WyrM | with a change to gen-blob. |
| 20:51.38 | WyrM | the problem is that the mainline driver cant deal with the usb state left by the motorola blob. |
| 20:51.38 | ao2 | good, another clumpsy patch we get rid of |
| 20:54.16 | ao2 | that means no udc when sending the kernel via boot_usb without gen-blob? |
| 20:54.26 | WyrM | yes. |
| 20:54.45 | WyrM | the original blob doesnt turn off usb before jumping to code. |
| 20:55.18 | WyrM | or we can "fix" this on the kernel. |
| 20:55.38 | WyrM | but i am not sure if the kernel driver should deal with a udc already enabled case at all. |
| 20:56.33 | ao2 | I think on the long run it's best to ask the kernel guys to give their opinion about that. For the casual user boot_usb will be the first step anyway I guess. |
| 20:57.03 | *** join/#openezx FosforoEee (n=Fosforo@20151124245.user.veloxzone.com.br) |
| 20:58.23 | ao2 | can you just add a comment inside udc setup in ezx.c for that? So also stefan will notice that. |
| 20:59.07 | WyrM | ao2: yes, but it is a bootloader bug, people are not very tolerant with kernel workarounds for bootloader bugs. ;) |
| 21:00.33 | ao2 | I see, that's why I used a vague expression about giving opinions and not about _fixing_ the behaviour :) |
| 21:00.50 | ao2 | see you later |
| 21:01.04 | WyrM | ao2: bye! :) |
| 21:03.05 | CIA-26 | OpenEZX: wyrm * r2275 /trunk/src/blob/gen-blob/src/blob/ (boot_modes.c usb_ctl.c): |
| 21:03.05 | CIA-26 | OpenEZX: disable usb inconditionally, so we can send gen-blob via boot_usb to use |
| 21:03.05 | CIA-26 | OpenEZX: it as a "proxy" to send linux-2.6-arm with UDC working on stock phones. |
| 21:04.09 | WyrM | now udc is possible on a stock phone, by sending gen-blob itself via boot_usb before sending the kernel. |
| 21:07.13 | CIA-26 | OpenEZX: wyrm * r2276 /branches/linux-2.6-arm/ (ezx-emu.patch series): initial emu/udc code |
| 21:14.32 | *** join/#openezx dion (n=dion@inhex.net) |
| 21:19.30 | CIA-26 | OpenEZX: wyrm * r2277 /branches/linux-2.6-arm/ezx-emu.patch: cleanup |
| 22:45.07 | *** part/#openezx FosforoEee (n=Fosforo@20151124245.user.veloxzone.com.br) |