| 00:00.20 | goxboxlive | WM: not yet. I have just compiled a new kernel. So no i shal rename all the mtdX files to 000xxxx.bin right? |
| 00:00.37 | WM | it doesnt matter. |
| 00:01.04 | goxboxlive | ok |
| 00:01.11 | WM | it is a good idea to rename them to what they are, eg motokernel, rootfs, bootloader, blob2, etc.. |
| 00:01.32 | goxboxlive | OK. But i flash from my computer right? |
| 00:01.37 | WM | no. |
| 00:01.41 | WM | from the phone. |
| 00:01.52 | WM | with mtd-[tools|utils] |
| 00:02.14 | WM | unlock, erase, and flash each partition. |
| 00:02.38 | DNAfanboy | grrrrr... boot_usb doesn't want to work now |
| 00:02.40 | goxboxlive | ok, i guess i have to install it then. I have never flashed before so i have no clude how to do it |
| 00:03.19 | WM | see koen's blog, (but dont follow his instructions literally). |
| 00:03.37 | WM | there is a post about "freeing your a780". |
| 00:04.13 | WM | DNAfanboy: which error? or lockup? at which %? |
| 00:04.36 | DNAfanboy | no, it simply goes out without doing nothing |
| 00:04.58 | WM | weird. |
| 00:05.44 | WM | are you passing the first argument? doing nothing (just detecting the phone model) is what it does when you dont point a kernel to it. |
| 00:09.04 | WM | goxboxlive: most people uses windows apps to flash. there is ezxflash to flash it from your computer. And there is mtd-* which allows you to flash the phone from the phone (and is more l33t) ;) |
| 00:11.58 | DNAfanboy | WM: I forgot that boot_usb should be run as root :( |
| 00:12.08 | goxboxlive | WM: wich kenrel should be the Openezx kernel? The mtd-a780-alternate or the one i made before? |
| 00:13.25 | WM | the alternate. |
| 00:13.51 | goxboxlive | ok |
| 00:13.52 | WM | now you will always use alternate, because it matches the flash layout you will be using. |
| 00:18.13 | DNAfanboy | hm, now X works... but I'm stuck on the calibration screen |
| 00:18.45 | goxboxlive | WM so now i should flash all the six files? |
| 00:19.51 | WM | no. |
| 00:20.14 | WM | just blob2, moto kernel, rootfs and openezx kernel. (4 files). |
| 00:20.34 | WM | see /proc/mtd to know where to flash each file. |
| 00:22.22 | WM | goxboxlive: if a typo, or anything else goes wrong, simply dont panic and flash again, you will still be able to boot_usb an openezx kernel no matter what happens. |
| 00:22.39 | goxboxlive | ok |
| 00:22.50 | WM | goxboxlive: check your battery before starting. |
| 00:23.06 | goxboxlive | It was fully charged an hour ago |
| 00:24.00 | WM | goxboxlive: checking it again doesnt hurt, and may save you some brain cells :) |
| 00:24.15 | goxboxlive | WM: ok, i'll do that :-) |
| 00:26.48 | WM | DNAfanboy: call ts_test, and see if the touch screen is working. If it is working, try to restart X. |
| 00:27.36 | WM | IIRC there is a file on /etc which stores the calibration data, erasing this file forces tslib to calibrate again. |
| 00:28.36 | WM | goxboxlive: do you work for trolltech? (im asking because of your avatar on motofans). |
| 00:28.40 | WM | :) |
| 00:29.31 | DNAfanboy | WM: /dev/input/touchscreen0: No such file or directory |
| 00:31.04 | goxboxlive | WM: no, i dont :-) It's just a cool avatar (i know there are better looking :) ) |
| 00:32.02 | WM | DNAfanboy: most likely udev problems. |
| 00:32.19 | WM | try the restart that i pointed you some time ago :) |
| 00:33.26 | WM | or look at /dev/input/ maybe it is just the link missing (this IS udev problem, as it should have created it automagically). |
| 00:33.58 | DNAfanboy | hm, touchscreen0 should be link of... event0? mice? |
| 00:34.28 | WM | cat each, and touch the screen. You will see the data ;) |
| 00:38.12 | WM | DNAfanboy: its ts0 |
| 00:38.24 | WM | at least on my version :) |
| 00:39.42 | goxboxlive | man ui takes ages to charge that phone. Good idea btw about checking the status :-) |
| 00:39.51 | WM | its event2 on my a780. |
| 00:40.28 | WM | goxboxlive: the backup probably drained your battery. |
| 00:42.06 | goxboxlive | What happends if goes empty while flashing, will it still charge? |
| 00:42.47 | WM | goxboxlive: NO. This is why assuring that it is charged is the more important step (unless you have a desktop charger) :) |
| 00:42.57 | WM | s/more/most/ |
| 00:43.06 | goxboxlive | right |
| 00:45.14 | DNAfanboy | WM: colors are funky, but OpenMoko runs on my A1200. Cool! |
| 00:47.30 | WM | DNAfanboy: congrats for your first openmoko boot ;) |
| 00:47.51 | WM | DNAfanboy: have you heard the infamous openmoko starting sound? |
| 00:51.35 | DNAfanboy | WM: no |
| 00:52.05 | WM | DNAfanboy: lucky you ;) |
| 01:00.55 | goxboxlive | My battery is fully charged :-) |
| 01:07.05 | *** join/#openezx TimRiker (n=timr@rikers.org) |
| 01:38.19 | WM | woohoo! |
| 01:38.42 | sn9 | ? |
| 01:39.04 | WM | Thomas Wood from OpenMoko team did the remaining gsmd integration for us! :) |
| 01:39.23 | sn9 | woohoo! |
| 01:39.31 | WM | http://blogs.gnome.org/thos/2007/10/30/turning-the-neo1973-into-an-expensive-external-gsm-modem/ |
| 01:40.21 | WM | i converted gsmd to proxy at commands to the network, and Thomas pty.c will do the job of integrating that to gsmd. |
| 01:42.36 | DNAfanboy | WM: hope it arrives soon on the images :D |
| 01:45.43 | WM | DNAfanboy: koen usually is very fast and helpful. You can expect good news for the next days. :) |
| 01:46.58 | sn9 | would you like to laugh some? |
| 01:47.56 | WM | sure. |
| 01:48.54 | sn9 | time index 02:00 in http://openwrt.org/logs/openwrt.log.20071101 |
| 01:51.51 | sn9 | just don't flash the .c file onto the phone ;) |
| 01:54.23 | WM | HAHAHAHAH |
| 01:54.28 | WM | stupid users. |
| 01:54.57 | WM | gcc x.c -o x.c |
| 01:54.59 | WM | :/ |
| 01:55.33 | WM | guess that this is "common" at least for stupid lazy people like me |
| 02:02.30 | WM | sn9: does openwrt runs on a d-link dsl-2640t? :) |
| 02:02.47 | sn9 | check the TOH first |
| 02:03.26 | sn9 | http://toh.openwrt.org |
| 02:03.35 | sn9 | but don't take what it says at face value -- it's a wiki after all |
| 02:05.48 | WM | sn9: not on the list. |
| 02:05.56 | WM | sn9: how do i start ? ;) |
| 02:06.33 | goxboxlive | man this takes a long time |
| 02:06.46 | sn9 | if you don't find it there, check its label for an FCC ID |
| 02:06.46 | sn9 | you can look up the id on the fcc website and find photos of the insides |
| 02:07.04 | sn9 | once the chipsets are identified, more can be known |
| 02:07.10 | goxboxlive | i startet rootfs (mtd3) flash one hour ago. |
| 02:07.22 | goxboxlive | is there anyway i can see the progress? |
| 02:07.41 | WM | goxboxlive: no. :/ |
| 02:07.49 | WM | it should have finished already. |
| 02:08.08 | goxboxlive | hmm |
| 02:08.27 | WM | this is the first that you are flashing? |
| 02:08.28 | goxboxlive | the first and seconf took a while too |
| 02:08.34 | goxboxlive | though they arent that big. |
| 02:08.41 | WM | continue waiting. |
| 02:08.49 | WM | turn off the lcd to save battery. |
| 02:09.29 | goxboxlive | i started with bl2, then ezx kernel, and now rootfs. I have to also openezx kernel left. |
| 02:09.59 | sn9 | WM: if you don't want to dig through the photos, you could instead open it up and make note of what chips you see |
| 02:10.19 | WM | cant i get some info on software? |
| 02:10.35 | WM | it already runs linux and i can telnet to it :) |
| 02:10.50 | sn9 | if you know the hardware, that really narrows down the software possibilities |
| 02:11.04 | goxboxlive | WM: how do i tunr off lcd, I only know how to turn off the backlight |
| 02:11.08 | WM | very likely it is very similar to an already supported model. |
| 02:11.25 | WM | goxboxlive: sorry, i meant the backlight :) |
| 02:11.30 | sn9 | oh? you have a shell? |
| 02:11.35 | goxboxlive | ok :-) |
| 02:11.44 | sn9 | "cat /proc/cpuinfo" for starters |
| 02:12.00 | WM | MIPS 4KEc V4.8 |
| 02:12.12 | WM | 211.35 bogomips. |
| 02:12.19 | sn9 | WM: ^^ |
| 02:12.58 | sn9 | damn lag |
| 02:13.45 | sn9 | 4KEc? that's a good sign so far. is there dmesg? |
| 02:14.45 | WM | no. But i can see some kernel messages on the web interface. |
| 02:14.52 | WM | and there is kmsg. |
| 02:16.02 | WM | Jan 1 12:00:15> registered device TI Avalanche SAR |
| 02:16.03 | WM | Jan 1 12:00:15> Ohio250(7200/7100A2) detected |
| 02:16.43 | sn9 | ok, it's an AR7 device |
| 02:16.43 | sn9 | it could run the AR7 port |
| 02:16.59 | sn9 | well, depending on how much ram and flash it has |
| 02:17.44 | WM | RAM: 14184 |
| 02:18.26 | WM | /proc/mtd shows 5 partitions. |
| 02:18.28 | sn9 | that's enough. flash? |
| 02:18.31 | sn9 | total? |
| 02:19.00 | WM | total RAM on 'free' |
| 02:19.13 | sn9 | i mean, total flash |
| 02:19.34 | WM | <PROTECTED> |
| 02:19.52 | WM | shows only the size of each partition, but these may overlap. |
| 02:20.23 | goxboxlive | rootfs done,now zImage :-) |
| 02:20.24 | WM | the biggest is 0x3c0000 |
| 02:20.33 | sn9 | it's still a rough guesstimate to add them up |
| 02:21.01 | WM | the biggest one has 3932160 bytes. |
| 02:21.37 | WM | 4Mb on the biggest partition. Is this good or bad? :) |
| 02:22.07 | sn9 | 4MB? what is that partition called? |
| 02:22.21 | WM | mtd4 :/ |
| 02:22.32 | sn9 | i mean the label on the right |
| 02:22.42 | WM | mtd4 |
| 02:22.43 | WM | :/ |
| 02:24.17 | WM | mtd0=3338240, mtd1=593776, mtd2=64k, mtd3=64k |
| 02:24.46 | sn9 | they're all just mtd[0-4]? |
| 02:24.56 | WM | yes. |
| 02:24.59 | sn9 | ok |
| 02:25.07 | WM | mtd0 is squashfs mounted on / |
| 02:25.16 | goxboxlive | done |
| 02:25.28 | goxboxlive | now what, shall i just reboot my phone? |
| 02:25.41 | WM | goxboxlive: cross your fingers and reboot! |
| 02:28.02 | sn9 | WM: use ps to find the arguments passed to the device's webserver |
| 02:28.17 | sn9 | tell me what they are |
| 02:28.39 | goxboxlive | WM: It boots, but only the normal kernel. How to boot the other one? |
| 02:29.01 | WM | sn9: thttpd -g -d /usr/www -u root -p 80 -c /cg |
| 02:29.15 | WM | turn off, and boot with the camera button pressed. |
| 02:29.39 | goxboxlive | :-) |
| 02:29.45 | WM | and the menu button to use boot_usb with the modem working :) |
| 02:30.15 | sn9 | WM: start a new instance: thttpd -g -d /tmp -u root -p 1080 |
| 02:30.30 | goxboxlive | sothe modem isent working with cam + power? |
| 02:31.00 | WM | goxboxlive: No. The original bootloader puts the modem into flash mode when you do that. |
| 02:31.19 | WM | goxboxlive: and you cant exit this flash mode without a power cycle. |
| 02:31.37 | goxboxlive | ok |
| 02:32.13 | sn9 | brb |
| 02:32.38 | goxboxlive | Well it's late up here now. I am about to go to work in 3 hours, have to get some sleep. Good night. Thanks a lot for your help. |
| 02:32.39 | *** join/#openezx sn9 (n=danielg4@gimpelevich.san-francisco.ca.us) |
| 02:32.55 | WM | goxboxlive: thank YOU :) |
| 02:33.50 | WM | sn9: did. But looks like the full command was wrapped. |
| 02:34.02 | WM | -c /cg doesnt make sense, there is no /cg :/ |
| 02:35.00 | sn9 | WM: you could cat /proc/#/cmdline |
| 02:35.20 | WM | ok. |
| 02:35.59 | WM | -c /cgi-bin/ |
| 02:36.23 | sn9 | once you have it running with /tmp on port 1080, dd mtd4 into a file there |
| 02:36.43 | sn9 | then wget it from your comp |
| 02:37.30 | WM | err.. ls: /tmp: No such file or directory |
| 02:37.33 | WM | ;) |
| 02:37.42 | WM | let me look for a writable place. |
| 02:37.57 | WM | <PROTECTED> |
| 02:38.43 | DNAfanboy | ahn... night all! |
| 02:39.02 | WM | night cesar. |
| 02:39.03 | sn9 | ok, use that |
| 02:39.35 | WM | the webserver still redirects me to /cgi-bin/webcm. |
| 02:39.36 | sn9 | kill the process you started and substitute /var |
| 02:39.48 | WM | will create the dirs on /var |
| 02:40.02 | sn9 | leave off the -c arg |
| 02:40.27 | WM | already off. |
| 02:40.43 | WM | the webserver probably enforces this dir :/ |
| 02:40.44 | WM | Index of /cgi-bin/webcm/ |
| 02:40.47 | WM | got it. |
| 02:41.22 | sn9 | after you wget the file, delete it from /var, and dd the other four |
| 02:41.43 | WM | isnt it too big for the free ram? |
| 02:41.57 | WM | i mean, busybox 'free' is what unit? |
| 02:42.28 | WM | no, it is fine 14mb free. |
| 02:42.56 | sn9 | it is too big if you leave mtd4 lying around |
| 02:43.10 | sn9 | delete that file before doing the others |
| 02:46.39 | WM | router locked. |
| 02:47.15 | sn9 | that's why you delete the mtd4 file as soon as you wget it |
| 02:47.25 | sn9 | i tried to warn you |
| 02:50.20 | *** join/#openezx _WM (i=wyrm@201.78.19.239) |
| 02:50.26 | sn9 | that's why you delete the mtd4 file as soon as you wget it |
| 02:50.26 | _WM | damn. |
| 02:50.28 | sn9 | i tried to warn you |
| 02:50.37 | _WM | had to restart it ;) |
| 02:50.45 | _WM | hahaha, should have listened you. |
| 02:51.00 | _WM | starting again. |
| 02:57.45 | _WM | lock up again. |
| 02:57.53 | _WM | this time with just mtd4 |
| 02:58.14 | sn9 | try splitting the file, since you're using dd |
| 03:02.01 | *** join/#openezx drWyrM (i=wyrm@20158247096.user.veloxzone.com.br) |
| 03:02.28 | drWyrM | (echo "root";echo "password";cat /dev/mtdblock/4) | nc router.wyrm 23 > mtd4.trashed.bin |
| 03:02.49 | drWyrM | will have to clean some trash of telnet controls char, but it works :) |
| 03:03.25 | sn9 | i was gonna say, since you're using dd, you could split the file |
| 03:03.54 | drWyrM | yes, and the telnet thing didnt work anyway :) |
| 03:07.25 | *** join/#openezx sn9 (n=danielg4@gimpelevich.san-francisco.ca.us) |
| 03:07.55 | sn9 | wtf just happened? |
| 03:09.26 | drWyrM | Read error: 104 (Connection reset by peer) |
| 03:09.41 | sn9 | yeah, but not just from freenode |
| 03:09.47 | drWyrM | mtd1 gives an IO error. |
| 03:10.31 | sn9 | skip it for the moment |
| 03:10.34 | drWyrM | damn. |
| 03:10.38 | drWyrM | lock up again. |
| 03:10.53 | drWyrM | and this time i am being very careful to delete the files :/ |
| 03:11.45 | drWyrM | anyway, already got 4, 3, 2. mtd1 gives an io error, will try 0 as soon as i reboot it again. |
| 03:11.45 | drWyrM | bbiab |
| 03:14.19 | *** join/#openezx WM (i=wyrm@20158242198.user.veloxzone.com.br) |
| 03:15.20 | sn9 | did you get 0? |
| 03:15.26 | WM | still getting. |
| 03:16.32 | WM | good |
| 03:16.38 | WM | all here (except 1) |
| 03:17.11 | sn9 | hexdump them to determine physical order and overlap |
| 03:17.52 | sn9 | if possible, determine which is physically first |
| 03:18.32 | WM | mtd4 starts with something that looks like a header. |
| 03:18.42 | WM | and then there are some bootloader strings.. |
| 03:18.49 | sn9 | do you see the same header in any others? |
| 03:19.27 | WM | no |
| 03:20.03 | sn9 | does the end of mtd4 match the end of any others? |
| 03:20.37 | sn9 | especially check mtd0 |
| 03:20.58 | WM | the start of mtd0 is on 0x91000 of mtd4 |
| 03:24.40 | WM | and the end matches. |
| 03:24.58 | sn9 | that makes no sense -- you said mtd4 was exactly 4MB |
| 03:25.06 | WM | so, mtd0 is fully inside mtd4. |
| 03:25.12 | sn9 | and mtd0 was 0x3c0000 |
| 03:25.14 | WM | not exactly. |
| 03:25.49 | sn9 | no? what is its hex size? |
| 03:26.06 | WM | mtd4 is exactly 0x3c0000 |
| 03:26.18 | WM | and mtd0 exactly 0x32f000 |
| 03:26.28 | WM | the difference is 0x91000 |
| 03:26.40 | sn9 | oh |
| 03:26.43 | WM | exactly the offset at where mtd0 starts on mtd4. |
| 03:27.40 | sn9 | mtd1 was 0x90f70, right? |
| 03:28.01 | WM | mtd1: 00090f70 00010000 "mtd1" |
| 03:28.03 | WM | yes |
| 03:28.30 | sn9 | can you dd just the first block of mtd1 and see where it fits? |
| 03:30.25 | WM | 0x90 on mtd4 |
| 03:30.35 | sn9 | aha |
| 03:30.41 | WM | so, mtd4 is mtd1+mtd0+header. |
| 03:31.00 | sn9 | not header+mtd1+mtd0? |
| 03:31.09 | WM | hehehe. |
| 03:31.12 | WM | of course :) |
| 03:32.19 | sn9 | assuming 4MB flash and that mtd2 and mtd3 are outside mtd4, that leaves 0x20000 unaccounted for |
| 03:32.38 | sn9 | because you said they were 0x10000 apiece |
| 03:35.12 | WM | correct. |
| 03:35.20 | sn9 | pastebin the hexdumped contents of the 0x90 header, and the first parts of mtd2 and mtd3 |
| 03:38.13 | WM | first part? which size? |
| 03:38.47 | sn9 | 0x200 should do |
| 03:40.50 | sn9 | also, pastebin /proc/ticfg/env |
| 03:42.13 | sn9 | (it's text) |
| 03:44.59 | WM | http://pastebin.com/d18c5f90b |
| 03:45.46 | WM | mtd3 is bootloader. |
| 03:47.00 | WM | mtd0 starts with a kernel zImage? Doesnt look like a decompressed kernel. (strings of Decompressing...) |
| 03:47.53 | WM | And my router is branded, Telemar. thats the reason for the TM-C prefix on the header. :) |
| 03:48.16 | sn9 | no, mtd2 is the bootloader, not 3 |
| 03:48.36 | WM | hum.. |
| 03:48.48 | WM | makes sense, mtd3 doesnt look like code ;) |
| 03:49.05 | sn9 | mtd3 is the env vars in /proc/ticfg/env |
| 03:49.12 | WM | ok. |
| 03:49.17 | sn9 | try this: |
| 03:50.54 | sn9 | echo mtd5 0x903e0000,0x90400000 > /proc/ticfg/env && cat /proc/ticfg/env |
| 03:51.36 | WM | sn9: #openwrt. |
| 03:51.54 | WM | ok. |
| 03:52.09 | WM | so lets continue over here. It just looked silent for a minute :) |
| 03:53.34 | WM | mtd5 0x903e0000,0x90400000 |
| 03:53.50 | sn9 | what about the rest? still there? |
| 03:53.58 | WM | yes. |
| 03:54.05 | WM | at least it looks like the same. |
| 03:54.07 | sn9 | so, that's just added? |
| 03:54.44 | WM | i havent diffed it, but a quick look, yes. |
| 03:54.52 | sn9 | reboot it |
| 03:55.22 | WM | ok. |
| 03:58.30 | *** join/#openezx drWyrM (i=wyrm@20158198064.user.veloxzone.com.br) |
| 03:58.42 | drWyrM | done |
| 03:59.04 | sn9 | see mtd5 in /proc/mtd now? |
| 03:59.11 | sn9 | get it |
| 03:59.26 | drWyrM | no mtd5 on /proc :( |
| 03:59.37 | drWyrM | neither on /dev/mtdblock |
| 04:00.13 | sn9 | oops |
| 04:00.37 | sn9 | echo -e 'mtd5\t0x903e0000,0x90400000' > /proc/ticfg/env && cat /proc/ticfg/env |
| 04:00.43 | sn9 | must be |
| 04:01.21 | drWyrM | rebooting again. |
| 04:01.24 | drWyrM | bbiab |
| 04:05.28 | *** join/#openezx _WM (i=wyrm@20158255071.user.veloxzone.com.br) |
| 04:05.44 | _WM | sn9: still no mtd5 on /proc/mtd |
| 04:06.10 | sn9 | but the spacing is the same in /proc/ticfg/env? |
| 04:06.29 | sn9 | or does it not appear there after a reboot? |
| 04:06.58 | _WM | it remains on ticfg/env. |
| 04:07.04 | _WM | the spacing looks the same. |
| 04:07.09 | sn9 | hmm |
| 04:07.53 | sn9 | i will take a look at info about the pspboot bootloader, which is what you have -- i'm more used to the adam2 bootloader on ar7 devices |
| 04:13.48 | _WM | ok :) |
| 04:13.50 | _WM | Thanks. |
| 04:14.09 | sn9 | just a sec |
| 04:19.42 | _WM | The 'T' on d-link model names means pspboot is used. |
| 04:20.08 | _WM | dsl-g604T is the most similar to my router, as it seems. |
| 04:22.25 | sn9 | the wiki page for that model says adam2, not pspboot |
| 04:25.50 | _WM | you are right, i misinterpreted a sentence on mips-linux.org |
| 04:26.08 | _WM | its some later T-series use pspboot.. :) |
| 04:41.59 | sn9 | _WM: i have an idea |
| 04:43.16 | _WM | go ahead. |
| 04:43.59 | sn9 | first: echo mtd5 > /proc/ticfg/env ; grep mtd5 /proc/ticfg/env |
| 04:44.10 | sn9 | make sure the line is gone |
| 04:45.07 | _WM | gone. |
| 04:45.23 | sn9 | echo mtd2 0x903e0000,0x90400000 > /proc/ticfg/env && cat /proc/ticfg/env |
| 04:45.54 | sn9 | is it changed? |
| 04:47.12 | _WM | are you sure you want me to change the configuration for the bootloader offset? |
| 04:47.19 | _WM | :O |
| 04:47.54 | sn9 | there's no reason the bootloader needs to be addressed after boot, so it's the only reasonable one to change |
| 04:48.22 | _WM | ok. |
| 04:48.42 | _WM | if i dont get back in 10 minutes, you can expect an "invoice". |
| 04:48.43 | _WM | hahahahah |
| 04:51.59 | _WM | ok, mtd2 now is the last line. |
| 04:52.23 | _WM | and the offsets are changed. |
| 04:52.33 | _WM | time to reboot (fingers crossed). |
| 04:56.23 | *** join/#openezx drWyrM (i=wyrm@20158249045.user.veloxzone.com.br) |
| 04:56.24 | sn9 | yay! |
| 04:56.45 | *** join/#openezx drWyrM (i=wyrm@20158249045.user.veloxzone.com.br) |
| 04:56.47 | sn9 | yay! |
| 04:56.52 | drWyrM | :) |
| 04:56.57 | drWyrM | mtd2 is 128k now. |
| 04:57.09 | drWyrM | already downloaded it. |
| 04:57.26 | sn9 | but don't overwrite the old mtd2 |
| 04:57.42 | drWyrM | ok. |
| 04:57.57 | drWyrM | mt2-n.bin is all bytes 0xFF |
| 04:58.06 | drWyrM | s/mt2/mtd2/ |
| 04:58.34 | sn9 | the sequence in the chip is: mtd2+mtd3+mtd4+mtd2-n |
| 04:58.49 | sn9 | no, it's not bad |
| 04:59.26 | drWyrM | :) |
| 04:59.31 | sn9 | echo mtd2 0x90000000,0x90010000 > /proc/ticfg/env && cat /proc/ticfg/env |
| 05:00.05 | drWyrM | set. |
| 05:00.18 | drWyrM | i guess that a reboot is not necessary now. |
| 05:00.21 | sn9 | not yet |
| 05:00.36 | sn9 | oh, "not necessary" |
| 05:00.55 | sn9 | keep the backups in a safe place |
| 05:01.24 | sn9 | echo mtd4 0x90020000,0x90400000 > /proc/ticfg/env && cat /proc/ticfg/env |
| 05:03.21 | drWyrM | set. |
| 05:04.09 | drWyrM | reboot? |
| 05:06.03 | sn9 | not yet |
| 05:19.47 | sn9 | drWyrM: go ahead and reboot |
| 05:20.06 | sn9 | wait |
| 05:20.27 | sn9 | change the end of mtd0 also |
| 05:20.50 | sn9 | no, don't do that |
| 05:20.56 | sn9 | just reboot |
| 05:25.06 | drWyrM | ok. |
| 05:25.09 | drWyrM | rebooting now. |
| 05:30.23 | *** join/#openezx WM (i=wyrm@201008084033.user.veloxzone.com.br) |
| 05:30.30 | WM | done |
| 05:30.50 | sn9 | do you have a spare dsl modem? |
| 05:31.28 | WM | Unfortunately no :( |
| 05:31.42 | sn9 | i'm looking at the ar7 pspboot image generation code, and the changes needed to support your model are ambiguous |
| 05:32.20 | sn9 | if you do not have a spare, open up the one you have and check for jtag/serial headers |
| 05:32.58 | sn9 | those will be your only recourse in the event it doesn't come out right the first time |
| 05:33.23 | WM | i dont have a jtag adaptor. |
| 05:33.33 | WM | via serial is it possible to unbrick it? |
| 05:35.08 | sn9 | yes, since there are flashing commands in the bootloader |
| 05:35.25 | WM | good. |
| 05:35.40 | sn9 | don't write to the bootloader partition, or you'll need jtag |
| 05:35.50 | WM | i guess that i will need a ttl <-> rs232 converter. |
| 05:35.53 | sn9 | yes |
| 05:36.23 | WM | good, i will protoboard one. |
| 05:37.05 | sn9 | 3.3v |
| 05:37.15 | WM | where do i get further instructions? on building and flashing. |
| 05:37.36 | sn9 | wait while i figure that out |
| 05:40.33 | WM | a standard max232 converter like http://www.armory.com/~rstevew/Public/Micros/RS-232/MAX232.gif will be 3.3v? |
| 05:41.03 | sn9 | i use the MAX3232 |
| 05:42.03 | WM | hum... i dont have a 3232 here. And i live in a _very_ small city, no electronics store. |
| 05:42.37 | sn9 | but you still have 232's there? that's more than here |
| 05:43.32 | sn9 | fortunately, i'm within driving distance of the mfr, which had "samples" |
| 05:43.53 | WM | i still have some 232, from old days of Nokia phones hacking |
| 05:43.53 | sn9 | got some MAX3222's, too |
| 05:44.16 | sn9 | are those phones 3.3v or 5v? |
| 05:44.41 | WM | IIRC 3.3 too. |
| 05:45.32 | sn9 | then it could work, but don't have the circuit connected to the device a second longer than needed -- i learned that the hard way |
| 05:50.43 | WM | its 5v. |
| 05:50.44 | WM | :/ |
| 05:51.20 | sn9 | you might be able to vary that with capacitors |
| 05:51.35 | sn9 | you can with the 3232/3222 |
| 06:03.47 | WM | i will need to do some research on this. |
| 06:04.08 | WM | maybe plug it to a scope and test it before the real thing. |
| 06:04.36 | sn9 | if you already have that stuff and not a 3232, by all means... |
| 06:05.56 | WM | i only have some 232 samples.. But i can borrow a scope for some days :) |
| 06:08.39 | WM | and software building and flasing instructions? do you have a newbie URL for me? :) |
| 06:09.28 | sn9 | building is self-explanatory |
| 06:09.45 | sn9 | but there is no support in the buildsystem for your model |
| 06:10.10 | sn9 | i am looking at the source right now to figure out how that should work for it |
| 06:10.33 | WM | ok, thanks :) |
| 06:39.53 | sn9 | WM: dlink-brazil support does not list your model |
| 06:55.31 | *** join/#openezx goxboxlive (n=jrs@195.159.97.196) |
| 07:30.06 | *** join/#openezx z72ka (n=hermanj@r5af183.net.upc.cz) |
| 08:21.44 | *** join/#openezx mickeyl (i=mickey@srv043.dedi23.de) |
| 08:21.47 | sn9 | WM: bad news |
| 08:22.16 | sn9 | read http://wiki.openwrt.org/OpenWrtDocs/Hardware/D-Link/DSL-G624T |
| 09:47.12 | *** join/#openezx florian (n=fuchs@217.146.132.69) |
| 09:48.10 | *** join/#openezx _WM (i=wyrm@20158250091.user.veloxzone.com.br) |
| 10:13.58 | *** join/#openezx goxboxlive (n=goxboxli@139.80-202-160.nextgentel.com) |
| 10:41.08 | *** join/#openezx pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 11:03.15 | *** join/#openezx LoneStar (n=xinzhen@211.144.200.92) |
| 11:29.15 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 12:06.11 | *** join/#openezx WM (i=wyrm@201.78.11.237) |
| 12:30.57 | *** join/#openezx _WM (i=wyrm@201.78.11.237) |
| 13:28.48 | *** join/#openezx z72ka (n=hermanj@r5af183.net.upc.cz) |
| 14:02.14 | *** join/#openezx agd5f (n=deuchera@65.242.105.130) |
| 15:18.42 | *** join/#openezx LoneStar (n=xinzhen@218.82.13.84) |
| 15:30.25 | koen | MTN: added packages/gsm/pty/pty.c |
| 15:30.25 | koen | MTN: added packages/gsm/pty_0.0.bb |
| 15:30.36 | _WM | koen: thanks! :) |
| 15:30.56 | _WM | i was waiting for that. Have you tested it? does it work? |
| 15:31.23 | koen | haven't tested it yet |
| 15:31.32 | koen | http://ewi546.ewi.utwente.nl/tmp/pty_0.0-r0_armv5te.ipk |
| 15:32.31 | mickeyl | nah |
| 15:32.33 | koen | hmmm |
| 15:32.36 | koen | http://blogs.gnome.org/thos/2007/10/30/turning-the-neo1973-into-an-expensive-external-gsm-modem/#comment-631 |
| 15:32.37 | mickeyl | openezx is so much more important |
| 15:32.49 | mickeyl | ;) |
| 15:33.18 | koen | the joys of using thunderbird: |
| 15:33.19 | koen | koen@dominion:~/Maildir/.archived-inbox/cur$ ls /tmp/md5/ | wc -l ; ls dupes/ | wc -l |
| 15:33.19 | koen | 5075 |
| 15:33.20 | koen | 47165 |
| 15:33.22 | mickeyl | heh |
| 15:33.26 | mickeyl | not bad |
| 15:33.27 | koen | 5k mails and 47k dupes |
| 15:33.39 | mickeyl | i'm going to have a go with a new imap client soon |
| 15:33.46 | mickeyl | thunderbird vs. sylpheed vs. sylpheed-claws vs. evo |
| 15:33.49 | mickeyl | vs. kmail |
| 15:33.55 | koen | vs tinymail :) |
| 15:33.58 | mickeyl | ooh right |
| 15:34.05 | mickeyl | what'd ya recommend? |
| 15:34.34 | koen | on osx thunderbird is the least bad client that supports threading |
| 15:34.58 | koen | but it doesn't give feedback on its actions, so I tried to move mails from my inbox to the archive a few times |
| 15:35.25 | mickeyl | can it cache headers? |
| 15:35.35 | koen | I think so |
| 15:35.47 | mickeyl | cool. w/ gprs the lag is almost unbearable if it can't |
| 15:35.48 | koen | I have it download certain folders completely anyway |
| 15:35.56 | mickeyl | right |
| 15:36.25 | koen | have you looked at infotrope yet? |
| 15:37.45 | koen | http://burtonini.com/blog/computers/lemonade-2007-01-23-13-10 |
| 15:38.43 | mickeyl | amazing stuff. i was completely ignoring imap until just recently... |
| 15:38.59 | mickeyl | "pop worked good enough" |
| 15:39.11 | koen | you learn to love imap when you have a laptop and workstation |
| 15:39.12 | mickeyl | but now that i'm a traveller *cough* it won't last |
| 15:39.15 | mickeyl | right |
| 15:39.16 | koen | (and a gazillion PDAs) |
| 15:40.33 | mickeyl | *nod* |
| 15:41.41 | janneg | mulberry is another client to consider |
| 15:42.24 | sn9 | [Thu 01 Nov 2007 08:30:33 AM PDT] * _WM was going to test it last night, but sn9 distracted me with OpenWRT stuff. ;) <--- you asked! |
| 15:42.52 | mickeyl | :D |
| 15:42.59 | _WM | sn9: Just joking :) |
| 15:43.12 | _WM | Its always fun to learn new stuff :) |
| 15:43.13 | janneg | it has probably still the best imap support |
| 15:43.39 | koen | I'm looking forward to zecke's unbroken qtopia-phone image as well |
| 15:44.16 | _WM | sn9: thank you very much btw! :) |
| 15:44.36 | sn9 | read up on the dsl-g624t? |
| 15:44.55 | sn9 | notice the similarities and differences |
| 15:44.56 | _WM | sn9: yes, so the mtd1 is "special" ? |
| 15:45.02 | sn9 | i guess |
| 15:45.44 | sn9 | try pinging ejka later, but be mindful of his timezone |
| 15:47.33 | sn9 | koen: one thing i hate about thunderbird threading is that when sorting by date, it goes by the date of the first post instead of the last -- apple mail.app does the opposite |
| 15:47.44 | _WM | if it wasnt my only router, it would probably be already bricked atm. :) |
| 15:47.46 | koen | I love mail.app |
| 15:47.52 | koen | but it doesn't do proper threading |
| 15:48.03 | koen | I might switch to that when I install leopard |
| 15:48.18 | sn9 | it's more proper than thunderbird (at least in panther) |
| 15:51.05 | koen | my problems is that it only has one level |
| 15:51.58 | sn9 | of threading? looks to me that so does thunderbird (at least 1.5.x) |
| 15:52.26 | koen | thunderbird has more levels |
| 15:52.37 | koen | but it takes >5 actions per folder to use that |
| 15:52.47 | sn9 | ahhh |
| 15:53.06 | sn9 | i just turned on imap in gmail |
| 15:53.51 | _WM | :) |
| 15:53.56 | koen | only since this week |
| 15:54.59 | sn9 | i signed up for gmail 13 months ago and haven't used it because i couldn't get the perl script that translates gmail to imap to work |
| 15:55.36 | _WM | where do i activate it? |
| 15:55.55 | sn9 | but, my previous e-mail provider runs dovecot configured to emulate courier-imap |
| 15:56.07 | sn9 | the result is not rfc-compliant |
| 15:56.28 | sn9 | the only client it breaks, however, is apple mail.app |
| 15:56.41 | koen | root@a780:~# pty localhost 7100 |
| 15:56.51 | koen | Thu Nov 1 16:56:09 2007 <1> vendor.c:59:gsmd_vendor_plugin_find() selecting vendor plugin "TI Calypso" |
| 15:56.51 | koen | Thu Nov 1 16:56:09 2007 <1> atcmd.c:562:atcmd_submit() submitting command `ATZ' |
| 15:57.32 | sn9 | after a yelling match with tech support, their netops is now in contact with linuxmagic to fix it |
| 15:58.18 | sn9 | i need rfc compliance in their server to finish the gmail migration |
| 15:58.38 | sn9 | _WM: settings -> forwarding |
| 16:00.04 | sn9 | the reason i signed up for gmail 13 months ago was that i found out about that perl script |
| 16:00.26 | sn9 | if i had found out earlier, i would have signed up earlier |
| 16:02.53 | CIA-38 | OpenEZX: wyrm * r2073 /trunk/src/userspace/ezxd/bt.c: quick hack atz. |
| 16:02.55 | _WM | koen: there may be some issues with CR/LF :/ |
| 16:03.28 | sn9 | just ignore LFs and you should be fine |
| 16:03.55 | koen | I can ignore LF, but the modem seems to need them |
| 16:04.46 | sn9 | then it's misbehaving -- the ETSI standard says bare CR must be acceptable |
| 16:04.47 | _WM | sn9: had to change the UI language to english. |
| 16:05.09 | _WM | there is nothing about IMAP in the portuguese settings. |
| 16:05.43 | koen | with my special gsmd that doesn't do ATZ it hangs as well |
| 16:05.44 | sn9 | _WM: you can probably change it back after turning on imap |
| 16:06.19 | _WM | sn9: the CR/LF issues are on both sides. We are proxying AT commands, ezxd expects \n from the network socket, and writes/expects \r\n from the modem. |
| 16:06.44 | sn9 | do not expect \r\n |
| 16:07.06 | sn9 | it's ok to write it, though |
| 16:08.14 | sn9 | have the network socket expect either \r or \n, just in case, too |
| 16:08.46 | sn9 | there are supposed to be S-registers that control all this stuff |
| 16:09.39 | sn9 | but by default, the modem must accept CR and not care whether it's followed by LF |
| 16:14.24 | sn9 | slmodemd is gpl, right? you can probably rip some code from it |
| 16:15.01 | *** join/#openezx drath_ (i=vmaster@p5B07EB69.dip.t-dialin.net) |
| 16:20.26 | *** join/#openezx TimRiker (n=timr@216.49.181.128) |
| 16:21.17 | CIA-38 | OpenEZX: wyrm * r2074 /trunk/src/userspace/ezxd/ (bt.c builtin.c cmdui.c ezxd.c raw.c): change \n to \r\n |
| 16:22.08 | _WM | sn9: the network socket now expects \r, the \n is "optional". |
| 16:22.51 | sn9 | again, that has to be settable |
| 16:23.28 | koen | http://ewi546.ewi.utwente.nl/tmp/ezxd_0.0+svnr2074-r3_armv5te.ipk |
| 16:27.24 | _WM | koen: you should have left the -DDEBUG :) |
| 16:34.50 | _WM | pty exits on my host. and gsmd enters a loop. |
| 16:35.09 | _WM | no |
| 16:35.14 | _WM | ezxd segfaults on the phone. |
| 16:36.43 | _WM | just after read(13, "\r", 1024) |
| 16:37.05 | sn9 | BUFSIZ? |
| 16:41.26 | _WM | no. |
| 16:41.38 | _WM | echo -en 'ATZ\r' | nc ezx 7100 works |
| 16:41.48 | _WM | echo -en '\r' | nc ezx 7100 crashes. |
| 16:42.00 | sn9 | hmm |
| 16:43.02 | _WM | crashes on a memove, it fails to detect the end of data queue. |
| 16:43.29 | _WM | i need -DDEBUG :) |
| 17:24.00 | koen | http://ewi546.ewi.utwente.nl/tmp/ezxd_0.0+svnr2074-r4_armv5te.ipk |
| 17:24.14 | koen | _WM: historically CFLAGS and LDFLAGS get overriden when using make -e |
| 17:24.41 | koen | so if you want to make sure certain flags are being passed you need to name the var differently |
| 17:25.09 | _WM | thanks, i didnt knew that :) |
| 17:26.37 | koen | '-e' tells make to honour the environment instead of the makefile for variables |
| 17:26.54 | koen | this is why setting CC=foo-bar-linux-gcc works :) |
| 17:27.55 | koen | -r4 has -DDEBUG set |
| 17:30.45 | _WM | something weird happened to the modem. |
| 17:31.19 | _WM | every command that i sent to the mux devices takes 3 seconds to be replied, and always with a +CIMI before the OK. |
| 17:31.34 | sn9 | that's a setting |
| 17:31.49 | _WM | and how did i change that? |
| 17:31.53 | _WM | :) |
| 17:32.09 | sn9 | i don't remember offhand, but i've seen it before |
| 17:32.29 | koen | AT+UNBORK=1 |
| 17:33.26 | _WM | root@a780:~$ shutdown -h now |
| 17:33.28 | _WM | easier |
| 17:41.25 | koen | drat |
| 17:41.38 | koen | pty goes into an ifinite loop is gsmd exits |
| 17:41.45 | koen | select(5, [3 4], [], NULL, NULL) = 1 (in [3]) |
| 17:41.46 | koen | read(3, 0xbec0d93d, 251) = -1 EIO (Input/output error) |
| 17:43.30 | _WM | happened again... |
| 17:43.32 | _WM | read(4, "\r\n+CIMI: \"724160100460970\"\r\n\r\nOK"..., 1024) = 34 |
| 17:43.58 | _WM | and as there is no \r\n at the end of OK, the OK is never sent to the network :/ |
| 17:46.14 | _WM | and the kernel driver prints "MUX DLCI 2 Send DISC got signal!" |
| 17:46.36 | koen | I'm not getting past 'AT' |
| 17:46.43 | koen | how are you starting gsmd? |
| 17:47.20 | _WM | im not. |
| 17:47.38 | _WM | i am still using echo | nc. |
| 17:48.22 | _WM | the \r\n thing is still buggy. |
| 17:51.10 | _WM | sending AT\r repeatedly puts the modem into this weird +CIMI thing. |
| 17:52.45 | CIA-38 | OpenEZX: wyrm * r2075 /trunk/src/userspace/ezxd/ (cmdui.c muxio.c): working. |
| 17:53.46 | _WM | i think that 2075 fixed the \r\n thing. |
| 17:54.45 | koen | http://ewi546.ewi.utwente.nl/tmp/ezxd_0.0+svnr2075-r4_armv5te.ipk |
| 17:56.35 | _WM | is this "working"? http://pastebin.com/d7e0193f3 |
| 18:01.13 | koen | yeah |
| 18:01.58 | koen | you want -v ti |
| 18:02.03 | _WM | but, right after this init sequence the modem is on the weird state that i said. |
| 18:02.09 | koen | since that's the closest thing to neptune |
| 18:02.28 | koen | Thu Nov 1 15:57:29 2007 <1> vendor.c:59:gsmd_vendor_plugin_find() selecting ven dor plugin "Broadcom BCM2132" |
| 18:02.38 | koen | I think that should be: |
| 18:02.39 | koen | Thu Nov 1 19:01:27 2007 <1> vendor.c:59:gsmd_vendor_plugin_find() selecting vendor plugin "TI Calypso" |
| 18:03.36 | koen | or -v tihtc |
| 18:10.48 | _WM | something is still very wrong. |
| 18:11.02 | _WM | gsmd says submitting a lot of commands. |
| 18:11.12 | _WM | but ezxd only receives a few. |
| 18:12.07 | _WM | and pty.c only shows the same commands that ezxd receives, so something is wrong with my copy of gsmd. |
| 18:12.22 | _WM | s/pty.c/strace pty.c/ |
| 18:13.25 | _WM | i am using gsmd.c on the host. What copy should i use? I am using svn.openmoko, should i use the git @ o-hand? |
| 18:13.37 | _WM | s/gsmd.c/gsmd/ |
| 18:17.28 | _WM | see http://pastebin.com/d21204bb3 |
| 18:18.08 | koen | either use the ohand git one or the patched one from OE |
| 18:18.31 | koen | the openmoko svn one is quite broken at the moment |
| 18:19.08 | koen | but as mickeyl pointed out, they are working on it |
| 18:19.54 | _WM | _very_ broken as it seems :) |
| 18:23.51 | *** join/#openezx TimRiker (n=timr@pdpc/supporter/bronze/TimRiker) |
| 18:25.01 | _WM | koen: the git version is probably broken too. |
| 18:25.03 | _WM | read(3, "ATZ\0\r", 255) |
| 18:25.14 | _WM | it is writing a NULL before \r. |
| 18:25.24 | _WM | is this null valid? ezxd doesnt like it. |
| 18:26.32 | koen | send a mail to andrew@o-hand.com and he'll answer :) |
| 18:32.17 | *** join/#openezx goxboxlive (n=goxboxli@139.80-202-160.nextgentel.com) |
| 18:33.43 | *** join/#openezx drath_ (i=vmaster@p5B07D91E.dip.t-dialin.net) |
| 18:36.25 | _WM | fixed. |
| 18:36.39 | _WM | now it looks good. |
| 18:37.24 | _WM | but andrews version doesnt send a bunch of commands, it sends only the ATZ. |
| 18:37.51 | koen | it probably waits for the reply |
| 18:38.03 | _WM | Thu Nov 1 16:38:56 2007 <1> atcmd.c:573:atcmd_submit() submitting command `ATZ' |
| 18:38.03 | _WM | Thu Nov 1 16:38:56 2007 <1> atcmd.c:296:ml_parse() buf=`OK'(2) |
| 18:38.14 | _WM | it receives the reply. |
| 18:38.31 | koen | try registering to the network |
| 18:38.47 | koen | libgsmd-tool -m shell <enter> |
| 18:38.54 | mickeyl | andrew revamped the main loop to synchronous? |
| 18:40.44 | _WM | Thu Nov 1 16:42:11 2007 <1> atcmd.c:573:atcmd_submit() submitting command `AT+COPS?' |
| 18:40.54 | _WM | but pty.c doesnt get it :/ |
| 18:42.11 | _WM | i think it is not accepting OK\r\n as a proper reply. |
| 18:42.28 | _WM | will force ezxd to send \r\nOK\r\n |
| 18:45.18 | _WM | same thing. |
| 18:46.36 | koen | itsn't that what wallie said in the comments in thos' blog? |
| 18:46.50 | koen | that something is eating linefeeds |
| 18:50.06 | koen | ah, wait, that was about nc |
| 18:50.54 | _WM | ml_parse reads the OK, and goto final_cb |
| 18:52.32 | _WM | but it dont call atcmd_done. |
| 18:53.15 | koen | does it think it's a multiline reply? |
| 18:54.32 | _WM | if (!cmd) is TRUE, so if return rc; |
| 18:56.08 | _WM | ive commented out the if (!cmd), then it enters atcmd_done, but then it infinite loops. |
| 19:03.10 | _WM | i quit. |
| 19:03.14 | _WM | at least for now. |
| 19:03.45 | _WM | looks like it doesnt accept the OK as the reply, and then it no longers tries to send another commands. |
| 19:13.44 | goxboxlive | _WM: how do i access the modem with cu? I tried cu -l /dev/mux0 -s 115200 but it just fails. Is there anything i have to do to open mux0? |
| 19:14.05 | _WM | goxboxlive: use ezxd. |
| 19:14.09 | _WM | nc localhost 7100 |
| 19:14.11 | _WM | :) |
| 19:14.54 | _WM | but be careful, there are at least 3 ezxd versions only at this week. |
| 19:15.42 | _WM | the one that is most near of being usable to gsmd is the current svn, it expects \r as command separator (and a following \n is optional). |
| 19:16.51 | goxboxlive | _WM: but i dont want gsmd, i just want to send AT CHAT to get familar with it |
| 19:17.01 | goxboxlive | http://pastebin.no/2746 |
| 19:17.20 | _WM | goxboxlive: http://ewi546.ewi.utwente.nl/tmp/ezxd_0.0+svnr2075-r4_armv5te.ipk |
| 19:17.49 | goxboxlive | _WM: i have just builded it and installed it |
| 19:18.00 | goxboxlive | and i am running iwmmxt |
| 19:18.44 | _WM | goxboxlive: then compile from svn, r2073. |
| 19:19.06 | goxboxlive | ok :-) |
| 19:19.44 | goxboxlive | hmm hold on, mine where r2070 |
| 19:20.08 | _WM | with r2073 you can nc <phone> 7100 and use it with \n command separators. |
| 19:20.32 | goxboxlive | ok good |
| 20:19.27 | CIA-38 | OpenEZX: ao2 * r2076 /branches/kernel-2.6.23.x-patches/defconfig-a780: * Sync defconfig-a780 with OE |
| 20:19.57 | ao2 | koen ^^^ |
| 20:20.20 | koen | thanks |
| 20:32.15 | WM|gone | ao2, koen: |
| 20:32.19 | WM|gone | some notes: |
| 20:32.27 | ao2 | yes, please |
| 20:32.38 | WM|gone | CONFIG_BT_HCIUSB=m this will never be used. |
| 20:33.42 | WM|gone | CONFIG_HIGH_RES_TIMERS=y this is too bleeding edge, and may cause some problems, but its ok :) |
| 20:34.04 | WM|gone | CONFIG_SWAP=y i dont like this, but its ok :) |
| 20:35.17 | WM|gone | the rest looks good. Thanks :) |
| 20:37.29 | WM|gone | im gone until sunday (my birthday!) Bye! |
| 20:37.54 | ao2 | I had the same thought abuot the SWAP settings, but it will not hurt, so I left it in. |
| 20:38.01 | ao2 | happy happy birthday |
| 20:39.04 | WM|gone | ahh, and CONFIG_BT_HCIUART_BCSP=y will never be used too. |
| 20:40.29 | WM|gone | ao2, Thanks! :) Now im really gone. |
| 20:40.48 | sn9 | bye |
| 20:54.59 | koen | WM|gone: congrats! |
| 21:02.51 | *** join/#openezx koen (n=koen@dominion.kabel.utwente.nl) |
| 21:02.53 | *** join/#openezx koen|away (i=koen@dominion.kabel.utwente.nl) |
| 21:03.54 | koen | ah, right the hci-usb is a leftover of me thinking the a780 is a neo :) |
| 21:04.42 | ao2 | what about BT_HCIUART_BCSP ? |
| 21:05.42 | koen | dunno |
| 21:05.52 | koen | maybe we'll see a moto phone that needs it |
| 21:07.02 | sn9 | what part of "never" leaves that open? |
| 21:08.04 | ao2 | sn9, you are right, WM said never _for_a780_ and since the config is for a780 I'll remove that too |
| 21:08.16 | sn9 | right |
| 21:18.50 | CIA-38 | OpenEZX: ao2 * r2077 /branches/kernel-2.6.23.x-patches/defconfig-a780: * Remove some useless settings |
| 21:27.39 | *** part/#openezx agd5f (n=deuchera@65.242.105.130) |
