| 01:11.43 | *** join/#openezx alexzhang (n=alexzhan@218.18.47.111) |
| 02:14.57 | *** join/#openezx drWyrM (n=wyrm@200.97.207.177) |
| 02:40.18 | alexzhang | hi drWyrM ;) |
| 02:49.27 | *** part/#openezx alexzhang (n=alexzhan@218.18.47.111) |
| 03:10.12 | *** join/#openezx drWyrM (n=wyrm@200.199.181.27) |
| 03:35.12 | *** join/#openezx Sahil_666726 (i=Samba@gateway/tor/x-2835dd96cb31fbe0) |
| 04:06.24 | *** join/#openezx drWyrM (n=wyrm@200.97.206.116) |
| 06:27.26 | Hopscotch | good morning |
| 07:29.36 | *** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1) |
| 08:31.23 | *** join/#openezx pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 09:07.11 | *** join/#openezx Sahil_666726 (i=Samba@gateway/tor/x-bb34765dc670931b) |
| 09:43.17 | *** join/#openezx LuitvD (n=luitvd@beigetower/luitvd) |
| 10:28.16 | *** join/#openezx LoneStar (n=xinzhen@218.81.37.194) |
| 10:34.10 | *** join/#openezx pleemans (n=peter@d51A5E76A.access.telenet.be) |
| 11:21.36 | *** join/#openezx ZS-Man (n=zsman@88.83.169.30) |
| 11:21.59 | LuitvD | ao2: that openmoko-image you built... is it finished? :) |
| 11:49.58 | koen | LuitvD: you can use the one I posted to the mailinglist |
| 11:50.08 | LuitvD | ah, right :) thanks |
| 11:50.40 | LuitvD | koen: to undo patches done with quilt push -a I can do quilt pop -a right? |
| 11:51.00 | LuitvD | koen: or do you only know the OE approach? :P |
| 11:51.26 | koen | quilt pop should work |
| 11:51.38 | LuitvD | kay |
| 11:51.40 | koen | but OE already has the updated e6 patches :) |
| 11:51.47 | koen | and a sane defconfig and cmdline as well |
| 11:52.33 | LuitvD | might be true, but this works faster for now |
| 11:52.48 | LuitvD | and I can remove and apply patches at will :) |
| 11:54.16 | koen | you can do that with OE as well |
| 11:54.25 | koen | since OE uses quilt to apply the patches :) |
| 11:55.10 | LuitvD | yeah, but I know how this way works now... I don't want to switch between clean kernel and OE for too many times :P |
| 11:55.34 | koen | in the end stuff will be built from OE |
| 11:55.42 | LuitvD | I know |
| 11:56.02 | koen | so working around OE is only going to cost time if you're not a kernel developer |
| 11:56.27 | LuitvD | by the way, I was trying to setup an OE build environment, started to "bitbake angstrom-minimal-images" and it failed at building bintools-cross or something like that... |
| 11:56.49 | koen | 64 bit computer? |
| 11:57.02 | LuitvD | yes |
| 11:57.16 | LuitvD | guess that's the problem there... |
| 11:57.19 | koen | right, the binutils dudes broke 2.18 |
| 11:57.25 | LuitvD | :( |
| 11:57.31 | koen | there's a patch in the OE bugtracker you can try |
| 11:57.33 | LuitvD | can I patch it in some way? |
| 11:57.37 | LuitvD | ah |
| 11:57.46 | LuitvD | I'll go look for it :P |
| 12:00.54 | LuitvD | koen: could it be possible to change my distro to ... say ... poky? |
| 12:01.16 | koen | yes, but why? |
| 12:01.56 | LuitvD | lol, just want to try poky someday |
| 12:02.09 | koen | the sato stuff is in the angstrom feeds as well |
| 12:02.27 | LuitvD | oooh, then I didn't ask for poky, right? :P |
| 12:04.32 | LuitvD | is Opened Hand helping OpenMoko too then? |
| 12:04.54 | koen | openmoko has hired OH, yes |
| 12:05.00 | LuitvD | cool :D |
| 12:05.03 | koen | OH is doing most of the coding for them |
| 12:06.08 | LuitvD | I wonder if I can connect my TI-89 Titanium to my phone someday :) |
| 12:06.13 | LuitvD | the cable fits... |
| 12:06.45 | koen | is that jack or usb? |
| 12:06.55 | LuitvD | USB :) |
| 12:06.57 | koen | soldering a serial cable for the jack plug is dead easy |
| 12:07.04 | LuitvD | (it has the jack plug too...) |
| 12:07.11 | koen | afaik the EMU is usb client |
| 12:07.18 | koen | and you can't connect client <> client |
| 12:07.38 | LuitvD | but the calculators can interconnect too... |
| 12:07.45 | LuitvD | so probably one of them can host |
| 12:07.57 | koen | using the usb protocol or something else? |
| 12:08.29 | LuitvD | I have no idea |
| 12:23.31 | *** join/#openezx Sahil_666726 (i=Samba@gateway/tor/x-10245315c7f775a3) |
| 12:23.33 | LuitvD | hmm, I hope I fixed binutils-cross now... |
| 12:23.36 | LuitvD | YES |
| 12:23.38 | LuitvD | IT WORKS :) |
| 12:24.52 | koen | hmmm |
| 12:24.53 | koen | http://bugs.openembedded.org/attachment.cgi?id=2455&action=edit |
| 12:25.50 | LuitvD | koen: oops? ... |
| 12:26.25 | koen | I pays off to have an autobuilder :) |
| 12:27.10 | LuitvD | what'ya buildin' ? |
| 12:30.35 | koen | angstrom*image for a lot of machines |
| 12:31.24 | koen | to be precise: http://rafb.net/p/zAZjBi27.html |
| 12:31.40 | koen | and it automatically files bugs if something fails |
| 12:32.06 | LuitvD | nice :P |
| 12:32.15 | *** join/#openezx LuitvD_ (n=luitvd@beigetower/luitvd) |
| 13:25.58 | koen | some more images available at http://www.angstrom-distribution.org/unstable/images/a780/20070914/ |
| 13:26.42 | LuitvD | yaay, all tar.gz :) |
| 13:28.52 | koen | and for e680 users: http://www.angstrom-distribution.org/unstable/images/e680/20070914/ |
| 13:30.19 | koen | Linux a780 2.6.21.4-ezxdev #3 PREEMPT Mon Sep 10 15:09:16 CEST 2007 armv5tel unknown |
| 13:30.20 | koen | <PROTECTED> |
| 13:30.21 | koen | :D |
| 13:46.56 | LuitvD_ | oeh, is that your phone? :D |
| 13:47.18 | LuitvD | freed for 2 days? :P |
| 13:50.35 | koen | yes :D |
| 13:51.13 | LuitvD | I'm so jealous :P |
| 13:54.01 | LuitvD | I'm switching service provider soon :) |
| 13:55.55 | koen | drat |
| 13:55.56 | koen | http://bugs.openembedded.org/attachment.cgi?id=2469&action=edit |
| 13:56.38 | LuitvD | isn't that the same error the a1200 build had? |
| 13:56.55 | koen | pretty much |
| 13:58.32 | LuitvD | stefan|hospital: hmm? what's wrong? |
| 13:59.51 | LuitvD | koen: the ezx12 patchset announcement will have binary builds of both kernel and angstrom? |
| 14:00.05 | koen | dunno |
| 14:00.11 | koen | I'm not part of openezx :) |
| 14:00.12 | stefan|hospital | LuitvD: Was snowboarding with alphaone at thursday and broke my right arm. |
| 14:00.24 | LuitvD | stefan|hospital: ahh, that sucks |
| 14:00.28 | koen | stefan|hospital: ouch, get well soon |
| 14:00.30 | LuitvD | stefan|hospital: are you right-handed? |
| 14:01.02 | LuitvD | stefan|hospital: hope it won't hurt for too long... good luck, get well! |
| 14:01.15 | stefan|hospital | LuitvD: yeah, that's why I answer that slow |
| 14:01.23 | stefan|hospital | koen: thanks |
| 14:01.29 | LuitvD | stefan|hospital: I see :P |
| 14:02.03 | stefan|hospital | koen: Hope OEDEM is still possible for me |
| 14:02.09 | LuitvD | so you're getting new casting now or something? |
| 14:02.15 | koen | stefan|hospital: me too |
| 14:02.35 | koen | stefan|hospital: we can designate a 'help-stefan-get-food-and-drink' person :) |
| 14:03.01 | LuitvD | that sucks |
| 14:04.18 | stefan|hospital | koen: heh |
| 14:04.23 | stefan|hospital | I just learn to do things with my left hand |
| 14:04.23 | stefan|hospital | LuitvD: indeed |
| 14:05.22 | LuitvD | stefan|hospital: indeed > casting ? |
| 14:06.13 | stefan|hospital | LuitvD: Cancel flight with GF |
| 14:06.47 | LuitvD | stefan|hospital: did it cost you much to cancel? or are you getting a full/partial refund? ... |
| 14:07.17 | LuitvD | koen: it's nice :) and stop teasing me, you know I want that really bad :P |
| 14:07.28 | stefan|hospital | koen: Already seen. :) Still much to fix |
| 14:07.41 | koen | I scap'ed that 1 minute ago :) |
| 14:07.55 | LuitvD | much of the theme is still way too big :( |
| 14:08.02 | koen | stefan|hospital: you have an e680, right? |
| 14:08.23 | stefan|hospital | LuitvD: Only 45% refund :( |
| 14:08.36 | LuitvD | stefan|hospital: ayee, that sucks even more |
| 14:08.43 | stefan|hospital | koen: ok, so not that one. |
| 14:09.10 | stefan|hospital | koen: yes, i have one at home |
| 14:09.37 | koen | stefan|hospital: http://www.angstrom-distribution.org/unstable/images/e680/20070914/ |
| 14:09.50 | koen | openmoko-image should follow later |
| 14:10.32 | LuitvD | koen: ao2 was building openmoko-images for ezx wasn't he? |
| 14:10.36 | stefan|hospital | koen: cool, will do some tests when i'm back at home. no idea when |
| 14:12.15 | stefan|hospital | koen: Can you add a pointercal for the A780 to OE? TS should be pretty stable. |
| 14:12.28 | koen | sure |
| 14:12.36 | stefan|hospital | thanks |
| 14:13.03 | stefan|hospital | I'll add one for E680 during my tests |
| 14:15.58 | *** join/#openezx alexzhang (n=alexzhan@218.18.47.111) |
| 14:18.59 | LuitvD | it's a good thing OE only needs to generate the locales once ... :S |
| 14:19.08 | LuitvD | it's taking half an hour already |
| 14:21.43 | ZS-Man | Hi all, is gsm calling in actual openmoko on a780 working ? When I type any number and press Dial, I get message: Not connected to network. Current status = Waiting for network registration. I use "dualboot" with blob2 |
| 14:22.39 | LuitvD | ZS-Man: ask koen about that |
| 14:22.46 | LuitvD | ZS-Man: he's running it non-stop |
| 14:23.15 | koen | see http://dominion.kabel.utwente.nl/koen/cms/ :) |
| 14:24.01 | LuitvD | koen: and the site tells you to search the mailing list archive? :P |
| 14:24.16 | koen | just read that page |
| 14:24.28 | LuitvD | oh, still that one |
| 14:24.29 | LuitvD | :P |
| 14:24.55 | LuitvD | koen: do you know how I could possibly fix the E6 framebuffer? |
| 14:25.44 | koen | I assume you need the pxafb-18pbb and kdrive-18bpp patches |
| 14:26.07 | LuitvD | I have no idea :P |
| 14:26.14 | LuitvD | I built through OE |
| 14:26.25 | LuitvD | and it does the same as when building normally |
| 14:26.34 | LuitvD | it shows green characters instead of white |
| 14:26.48 | LuitvD | and in a graphic environment, it's all twisted colours |
| 14:27.12 | LuitvD | koen: http://flickr.com/photos/46466319@N00/1383299032/ |
| 14:27.14 | LuitvD | :) |
| 14:27.42 | LuitvD | koen: that's what it does, patched and unpatched |
| 14:28.15 | koen | that's kdrive, which needs to get patches with an 18bpp patch |
| 14:28.37 | LuitvD | are those patches in the svn set? |
| 14:28.46 | koen | no |
| 14:28.52 | LuitvD | riight |
| 14:28.53 | koen | it's a userspace patch |
| 14:29.12 | LuitvD | why userspace? |
| 14:29.27 | koen | because X11 runs in userspace? |
| 14:29.35 | LuitvD | it's not just the graphic environment that's in wrong colours... |
| 14:29.40 | LuitvD | the framebuffer too |
| 14:29.58 | koen | [16:25] koen: I assume you need the pxafb-18pbb and kdrive-18bpp patches |
| 14:30.15 | LuitvD | hmm... |
| 14:30.27 | LuitvD | why is framebuffer userspace? :? |
| 14:30.39 | ZS-Man | koen: Ok, thanks. With GUI it is no possible.... :-( For flashing I use ezxflash. Is it OK ? |
| 14:30.44 | koen | the framebuffer isn't |
| 14:30.53 | koen | but you need kernel *and* x11 support for 18bpp |
| 14:31.19 | LuitvD | but still... the framebuffer while booting is wrong too... |
| 14:31.25 | LuitvD | how do I fix thát? |
| 14:31.37 | LuitvD | I bet thát is a kernel patch... |
| 14:36.56 | stefan|hospital | koen: It could be that the patch is only enabled for a1200 in OE yet... |
| 14:37.56 | LuitvD | stefan|hospital: I used alexzhang's kernel, and it does the same... |
| 14:39.20 | koen | there are no 18bpp patches for ezx or kdrive in OE |
| 14:41.17 | alexzhang | LuitvD, my kernel I sent to you is not supporting 18bpp yet. |
| 14:41.28 | LuitvD | alexzhang: ah, right |
| 14:41.43 | LuitvD | alexzhang: do you have the one that does have normal colours somewhere? |
| 14:41.51 | LuitvD | alexzhang: I want to test that one :) |
| 14:41.53 | alexzhang | so you must see blue boot screen right? |
| 14:42.21 | LuitvD | the calibration screen is blue, yes |
| 14:42.24 | alexzhang | yes, I can send you later. |
| 14:42.31 | LuitvD | thanks :) |
| 14:45.26 | LuitvD | you can mail it to me the same way you mailed the other one |
| 14:45.44 | alexzhang | ok |
| 14:46.01 | stefan|hospital | LuitvD: No work or debugging from me. To much medicine. |
| 14:46.12 | LuitvD | stefan|hospital: I understand |
| 14:46.17 | alexzhang | hi stefan|hospital |
| 14:46.31 | alexzhang | Are you OK? :) |
| 14:47.57 | LuitvD | alexzhang: got it :) thanks |
| 14:48.18 | stefan|hospital | alexzhang: Is login to people working for you? |
| 14:48.19 | stefan|hospital | hi alexzhang |
| 14:48.22 | stefan|hospital | good, for being in a hospital |
| 14:49.21 | alexzhang | what's matter with you? :) |
| 14:49.28 | alexzhang | I cannot login |
| 14:49.45 | alexzhang | it ask me a password, what's happen? |
| 14:49.52 | LuitvD | alexzhang: did you patch the ezx-backlight.patch on that kernel? |
| 14:50.19 | LuitvD | alexzhang: because I think you have |
| 14:50.28 | LuitvD | alexzhang: I can't see a thing on my phone :P |
| 14:50.56 | alexzhang | no backlight patch for a1200 available yet |
| 14:51.15 | LuitvD | I mean the ezx-backlight patch |
| 14:51.48 | alexzhang | that patch does not work for a1200 AFAIK |
| 14:51.56 | LuitvD | hmm, ... |
| 14:52.14 | LuitvD | I'm not getting anything right now... |
| 14:52.22 | LuitvD | it does boot, but I can't see a thing |
| 14:52.25 | LuitvD | the backlight is off |
| 14:52.37 | alexzhang | using my kernel I just sent to you? |
| 14:52.43 | LuitvD | yes |
| 14:52.44 | LuitvD | that one |
| 14:52.58 | LuitvD | and I didn't have that problem with the older kernel you sent me |
| 14:53.11 | alexzhang | hmm... maybe coz the buggy blob you know. |
| 14:53.51 | LuitvD | it ain't blob |
| 14:54.04 | alexzhang | I'll another one. just a minute ... |
| 14:54.23 | LuitvD | I had exactly the same thing when I used the ezx-backlight patch |
| 14:55.43 | stefan|hospital | alexzhang: broke my right ar |
| 14:55.45 | stefan|hospital | alexzhang: let me take a look about the login problem |
| 14:55.49 | alexzhang | no, no that problem. that image works to me. |
| 14:56.22 | alexzhang | stefan|hospital: OK, thanks! :) |
| 14:58.17 | alexzhang | LuitvD: I have sent you another image, try it please. |
| 14:59.14 | LuitvD | alexzhang: lol, mmc suddenly work? :P |
| 15:00.00 | koen | e6 and a1200 people: http://lists.linuxtogo.org/pipermail/openembedded-commits/2007-September/008867.html |
| 15:00.51 | alexzhang | yes, suddenly worked, but doesnot work now ... LOL!! |
| 15:00.54 | alexzhang | ;) |
| 15:01.12 | LuitvD | alexzhang: I get some visual stuff now... but it's not nice... |
| 15:01.42 | LuitvD | looks like it tries to squeeze the wrong resolution onto my screen |
| 15:02.10 | koen | alexzhang: is that pxafb 18bpp patch you sent on 20070808 to the list in svn? |
| 15:02.24 | LuitvD | koen: how or where do I apply that patch? |
| 15:02.54 | koen | in the SRC_URI of xserver-kdrive_1.3.0.0.bb |
| 15:02.55 | alexzhang | oh! I know, maybe you should add 18bpp patch to kdriver too. |
| 15:03.54 | alexzhang | koen: I never send patches to svn , but I have already sent them to maillist |
| 15:05.20 | koen | you don't have to send them to svn for them to end up there :) |
| 15:09.43 | LuitvD | the keys work too by the way... |
| 15:11.24 | LuitvD | dammit, my laptop has been generating locale for more then an our now |
| 15:11.37 | LuitvD | why do I need all those locales? :S |
| 15:13.18 | koen | because only the dutch are so polite to learn other languages than their mother tongue ;) |
| 15:14.12 | LuitvD | good thing we don't all _have_to_ |
| 15:14.52 | LuitvD | I'm not gonna use chinese, taiwanese, ukrainian, greek, bulgarian, russian, etc. etc. etc. |
| 15:16.29 | alexzhang | but I need chinese LOL |
| 15:16.58 | LuitvD | true |
| 15:17.28 | LuitvD | but I don't _need_ dutch :) |
| 15:17.42 | LuitvD | if I want to do everything in English, nobody will stop me |
| 15:19.25 | *** join/#openezx drWyrM (n=wyrm@200.199.181.56) |
| 15:20.30 | koen | 18bpp patch for the kernel is now in OE as well |
| 15:20.55 | LuitvD | koen: so mtn pull && mtn up will work? |
| 15:21.17 | koen | yes |
| 15:21.21 | LuitvD | good |
| 15:21.22 | koen | in a minute or 2 |
| 15:21.50 | LuitvD | don't worry, my laptop ain't ready yet. |
| 15:22.03 | koen | it's only active for a1200 (see commit message) |
| 15:22.14 | koen | poke drWyrM about adding it to svn :) |
| 15:22.30 | LuitvD | :( |
| 15:22.39 | LuitvD | why not to e6? |
| 15:24.33 | stefan|hospital | alexzhang: Please try to login again. |
| 15:25.13 | alexzhang | ok! thanks |
| 15:25.36 | stefan|hospital | alexzhang: working? |
| 15:26.09 | alexzhang | work! thanks! ;) |
| 15:26.44 | stefan|hospital | good |
| 15:27.46 | alexzhang | so, next step, I should add a password? |
| 15:28.26 | *** join/#openezx WM (n=wyrm@200.97.206.78) |
| 15:28.34 | stefan|hospital | alexzhang: yes |
| 15:28.55 | WM | nick drWyrM |
| 15:28.58 | WM | oops |
| 15:29.23 | drWyrM | Hi all. |
| 15:29.30 | LuitvD | hi :D |
| 15:31.05 | alexzhang | stefan|hospital: password for SVN(add it to $HOME/svn-passwd.txt) or for ssh? I am not so clear ;) |
| 15:32.06 | stefan|hospital | alexzhang: svn into the file. Changing your ssh password is possible with passwd |
| 15:33.25 | alexzhang | ok! I've got it. Thanks! :) |
| 15:35.29 | drWyrM | alexzhang, where is PC on the last crash? (with dummy hcd) |
| 15:35.39 | alexzhang | to change ssh password, I should type passwd, but what's my current password?? =-O |
| 15:36.21 | alexzhang | drWyrM: what's mean? |
| 15:36.50 | drWyrM | where the code was executing when it crashed. It shows on the crash log. |
| 15:37.40 | alexzhang | hmm.. system crashed and lcd is black, so I dont know what's happen :( |
| 15:37.59 | drWyrM | alexzhang, then you cant tell for sure that the system crashed. :) |
| 15:38.32 | drWyrM | lcd black means the backlight was not turned on, not that the system crashed, |
| 15:39.07 | alexzhang | oh? but when I push the power button, it reboot again ... :) |
| 15:39.24 | LuitvD | alexzhang: does boot_usb finish? or does it hang? |
| 15:40.04 | drWyrM | alexzhang, if the system crashed, you would need to remove the battery. |
| 15:40.19 | drWyrM | alexzhang, if you can power it on, means that the phone turned off. |
| 15:41.14 | drWyrM | is the copy that you are testing trying to handshake with BP?? Or with ezx-bp.c compiled in? |
| 15:41.24 | alexzhang | ok, sorry for use such sense word: crash. ;) |
| 15:42.40 | alexzhang | no BP codes compiled in. |
| 15:44.01 | drWyrM | and commenting out ezx-a1200.c line 290, does it still power off?? |
| 15:44.40 | alexzhang | ok! I'll try it. |
| 15:45.09 | drWyrM | if it doesnt solve, then there is no relation with the eoc driver. |
| 15:45.29 | LuitvD | drWyrM: where or how did you say I needed to switch to Dummy hcd ? |
| 15:46.04 | drWyrM | LuitvD, make ARCH=arm menuconfig |
| 15:46.25 | LuitvD | ... |
| 15:47.07 | drWyrM | and you dont "need", with dummy hcd usb will not work! It is just to determine if it is crashing/not crashing on the eoc code. |
| 15:47.36 | drWyrM | if eoc code proves safe/working, you reenable pxa27x-udc and try to fix the crash. |
| 15:47.45 | LuitvD | drWyrM: can't I just disable a patch or something? I don't really understand that menuconfig setup... |
| 15:48.17 | drWyrM | LuitvD, are you using my version of the defconfig-a1200? |
| 15:48.39 | LuitvD | I'm using a clean vanilla kernel with the svn patches |
| 15:49.13 | drWyrM | and Makefile.OpenEZX? |
| 15:49.19 | LuitvD | yes |
| 15:49.25 | drWyrM | edit patches/defconfig-a1200 |
| 15:50.22 | drWyrM | comment out lines 874,875, change line 881 to CONFIG....=y |
| 15:50.40 | alexzhang | :) it solved |
| 15:50.43 | drWyrM | and uncomment 881, of course. |
| 15:50.59 | LuitvD | drWyrM: I'm building for e6 |
| 15:51.01 | LuitvD | not a1200 |
| 15:51.09 | drWyrM | alexzhang, removing line 290 solved? |
| 15:51.14 | alexzhang | yes. |
| 15:51.26 | drWyrM | LuitvD, the same, defconfig-e6 |
| 15:51.28 | LuitvD | drWyrM: you made the e6 configuration resemble the a1200 config right? |
| 15:51.34 | LuitvD | okay |
| 15:52.17 | alexzhang | I have tested and debugging many times about that. I am sure it's eoc driver crashing system. |
| 15:52.33 | drWyrM | alexzhang, can you investigate it please? maybe a write to eoc registers is powering of everything. |
| 15:52.55 | drWyrM | disable all the writes on the eoc ->init() function. |
| 15:53.17 | drWyrM | and reenable line 290. |
| 15:53.34 | alexzhang | yes, I will, but I dont think write eoc registers to powering of something. |
| 15:53.54 | drWyrM | and i dont think that eoc is crashing the kernel :) |
| 15:54.05 | drWyrM | poweroff != crash. |
| 15:54.13 | alexzhang | because I dont write anything to eoc, only register one i2c client driver, it crashed too. |
| 15:54.34 | alexzhang | I have debugged many times ... |
| 15:54.45 | alexzhang | :( |
| 15:55.07 | drWyrM | alexzhang, i believe you. But all the other i2c drivers work without the hack on i2c-core. |
| 15:55.13 | alexzhang | sorry, use that sense word too ;) |
| 15:56.10 | drWyrM | alexzhang, you debugged it before my changes. I changed it to do client stuff only after i2c-core calls detect() |
| 15:56.28 | alexzhang | no, not all other i2c driver, I used akita-ioexp.c, it does work too. |
| 15:56.50 | drWyrM | it no longer tries to write to i2c before i2c is fully initialised. |
| 15:57.29 | LuitvD | koen: I can't build for rokre6 either :P |
| 15:57.33 | LuitvD | koen: same error |
| 15:57.40 | drWyrM | LuitvD, same fix. |
| 15:57.57 | drWyrM | LuitvD, i replied to the ML about the erro koen was getting. |
| 15:58.29 | LuitvD | right... |
| 15:59.10 | LuitvD | drWyrM: I have a strange problem now... the phone shuts down... I guess alexzhang had the same |
| 15:59.25 | LuitvD | shuts down after executing a bit of the kernel |
| 16:00.16 | drWyrM | LuitvD, great! finally you managed to get a 100% up-to-date setup :) Now you are side-by-side with other developers and can start real development work. |
| 16:00.36 | LuitvD | heheh, yeah :P |
| 16:00.49 | drWyrM | alexzhang, does r2053+ solved boot_usb for you? |
| 16:02.14 | alexzhang | oh! where I can see which version of boot_usb I use? |
| 16:02.38 | drWyrM | you downloaded with svn? or via web/wget? |
| 16:02.53 | alexzhang | update with svn |
| 16:03.11 | drWyrM | then you have the latest. It works ?? |
| 16:03.28 | drWyrM | or you had to change anything?? |
| 16:04.06 | alexzhang | dont work |
| 16:04.19 | alexzhang | never change anything. |
| 16:05.26 | LuitvD | look for this line: |
| 16:05.30 | drWyrM | see line 346~364 of boot_usb.c |
| 16:05.33 | LuitvD | #ifdef DEBUG /* query information only if debugging */ |
| 16:05.54 | drWyrM | LuitvD, it is unlikely to help on the last version. |
| 16:06.01 | LuitvD | it worked for me |
| 16:06.14 | drWyrM | LuitvD, probably a1200 doesnt work because it is different than e6. |
| 16:06.15 | LuitvD | I have the latest svn version I guess... |
| 16:06.30 | LuitvD | drWyrM: probably... |
| 16:06.44 | drWyrM | I updated boot_usb after you reported the problem. update and see boot_usb.c line 246. |
| 16:07.07 | drWyrM | #debug should be no longer necessary on a1200. |
| 16:07.13 | drWyrM | s/a1200/e6/ |
| 16:08.29 | alexzhang | drWyrM: what have been changed in new boot_usb from old boot_usb? |
| 16:10.14 | drWyrM | alexzhang, see http://cia.vc/stats/project/OpenEZX/.message/15e87 and http://cia.vc/stats/project/OpenEZX/.message/146f6 |
| 16:10.19 | LuitvD | yaaay, my name is in some sourcecode :P |
| 16:11.01 | LuitvD | but boot_usb doesn't work... |
| 16:11.05 | LuitvD | the newest file... |
| 16:11.24 | alexzhang | great! |
| 16:12.25 | *** join/#openezx WM (n=wyrm@200.199.181.56) |
| 16:12.50 | WM | Last msg i got: <LuitvD> yaaay, my name is in some sourcecode :P |
| 16:13.50 | LuitvD | the newest boot_usb won't work |
| 16:13.51 | LuitvD | for me |
| 16:15.02 | drWyrM | damn. dont want to lose more time with boot_usb. |
| 16:15.41 | alexzhang | :) so I just use old boot_usb |
| 16:15.41 | ao2 | stefan|hospital be healty soon. Hi everyone |
| 16:16.07 | alexzhang | good news. :) |
| 16:16.08 | LuitvD | drWyrM: uncommented your piece of code, and it works again though... |
| 16:16.19 | CIA-23 | OpenEZX: wyrm * r2057 /trunk/src/host/boot_usb/boot_usb.c: this simply works, who knows why. |
| 16:16.21 | LuitvD | s/uncomm/comm/ |
| 16:16.49 | koen | drWyrM: CONFIG_EZX_EOC=y in the defconfig |
| 16:17.11 | drWyrM | Hi ao2. What happened to stefan? |
| 16:17.16 | LuitvD | drWyrM: that does work :) |
| 16:17.50 | ao2 | drWyrM, he broke his arm when snowboarding |
| 16:18.55 | drWyrM | koen: if you have some time, could you check for any inconsistency on Makefile and Kconfig? reg_write is not static. |
| 16:19.03 | LuitvD | his armv5te? |
| 16:19.22 | LuitvD | s/his/broke his/ |
| 16:19.28 | LuitvD | :P |
| 16:20.34 | koen | alexzhang: http://www.rpsys.net/openzaurus/patches/ |
| 16:23.26 | alexzhang | koen: what's it? |
| 16:23.45 | koen | a place that has udc patches |
| 16:24.24 | alexzhang | oh! good! thanks koen, I'll try them when I have spare time. :) |
| 16:25.25 | drWyrM | alexzhang, please!! i beg you! Try to fix the version on our svn, i am sure that there is a way to make it work without the patch to i2c-core.c |
| 16:25.36 | drWyrM | :) |
| 16:25.39 | drWyrM | bye all. |
| 16:25.50 | LuitvD | bye wyrm |
| 16:26.06 | alexzhang | bye wyrm |
| 16:26.19 | alexzhang | I'll try my best ... :) |
| 16:32.11 | *** join/#openezx ZS-Man (n=zsman@88.83.169.30) |
| 16:36.16 | koen | ah, found the error |
| 16:36.29 | koen | I set EOC to y while leaving I2C to m |
| 16:39.39 | koen | LuitvD[eating]: a1200 and rokre6 buids should be fixed now in OE |
| 16:48.43 | *** join/#openezx ZS-Man (n=zsman@88.83.169.30) |
| 16:52.09 | alexzhang | bye all! |
| 16:54.47 | *** part/#openezx alexzhang (n=alexzhan@218.18.47.111) |
| 16:55.08 | *** join/#openezx ZS-Man (n=zsman@88.83.169.30) |
| 16:56.29 | *** join/#openezx ZS-Man (n=zsman@88.83.169.30) |
| 17:05.56 | *** join/#openezx wt (i=wt@conference/plone/docsprint/x-4abf2ebf931565aa) |
| 17:20.20 | *** join/#openezx TimRiker (n=timr@rikers.org) |
| 17:56.05 | koen | there |
| 17:56.14 | koen | rorkre6 kernel build fixed |
| 17:56.34 | koen | my spelling still needs fixing :) |
| 18:01.38 | LuitvD[eating] | yaaay |
| 18:01.51 | LuitvD | koen: what went wrong then? |
| 18:02.57 | LuitvD | wow, my laptop has been compiling @ full load on battery for 2 hours :D |
| 18:03.12 | LuitvD | and still has 1 more to go |
| 18:05.27 | LuitvD | koen: could you build a kernel for a1200 through OE for me? |
| 18:05.45 | LuitvD | koen: my resources are all put to use right now... |
| 18:06.05 | LuitvD | koen: I want the E6 to have the same 18bpp patch... I'm not sure if it works though... |
| 18:07.34 | LuitvD | (and if you do, please don't include ezx-backlight.patch, because that one disables my backlight, instead of turn it on |
| 18:08.48 | LuitvD | koen: oh, never mind, I'm gonna try myself (just finished compiling) |
| 18:27.39 | *** join/#openezx LoneStar (n=xinzhen@218.81.37.194) |
| 18:42.12 | LuitvD | hi mickeyl |
| 18:42.43 | LuitvD | koen: that 18BPP patch you did, it does fix colours, but it squeezes my resolution somehow... |
| 18:43.03 | LuitvD | it now doesn't use the most right 25% of my screen |
| 18:43.39 | LuitvD | have any idea how that's possible? |
| 18:43.54 | LuitvD | or what I can do to find out what's going on? |
| 19:10.14 | *** join/#openezx Sahil_666744 (i=Samba@gateway/tor/x-70d45dd25440c6f4) |
| 19:13.09 | LuitvD | omg, never had that before... |
| 19:13.24 | LuitvD | the kernel OE built for my device was "Too big" according to the sizecheck |
| 19:14.25 | koen | I disabled that check :) |
| 19:14.39 | koen | the comment says it's for bootusb, but bootusb seems to handle it fine |
| 19:15.19 | LuitvD | good |
| 19:15.47 | LuitvD | can you correct it on OE too then? please? |
| 19:18.09 | koen | I already did an hour ago |
| 19:19.44 | LuitvD | :S |
| 19:19.52 | LuitvD | strange |
| 19:20.16 | LuitvD | it just did that check... 6 minutes ago |
| 19:20.34 | LuitvD | and I mtn pull && mtn up'd right before that |
| 19:21.21 | koen | LuitvD: http://www.openembedded.org:1081/revision/diff/d8e2c140a0c6c65576a5c6afccbea0fd4a30def4/with/a3ee5d88f6d1100cd285c2fead8e37018bd42a9f?q=viewmtn/revision/diff/d8e2c140a0c6c65576a5c6afccbea0fd4a30def4/with/a3ee5d88f6d1100cd285c2fead8e37018bd42a9f |
| 19:22.38 | koen | (where did it say 'too big'? |
| 19:24.21 | LuitvD | don't know anymore... |
| 19:24.22 | LuitvD | :P |
| 19:25.52 | LuitvD | some check after compilation |
| 19:26.01 | koen | right |
| 19:26.17 | koen | it still complains, but it won't delete the kernel anymore |
| 19:26.24 | koen | as you can see in the diff |
| 19:26.34 | LuitvD | right... |
| 19:27.44 | LuitvD | why are we at r15 now? :S |
| 19:27.53 | LuitvD | wasn't that r12 two days ago? |
| 19:28.07 | koen | aaargh |
| 19:28.16 | koen | mickeyl reverted my commit |
| 19:28.55 | LuitvD | XD |
| 19:29.04 | LuitvD | that's why I didn't see the effect of it :P |
| 19:30.21 | koen | you were able to boot http://www.angstrom-distribution.org/unstable/images/rokre6/20070915/zImage-2.6.21-ezxdev-r14-rokre6-20070915174444.bin ? |
| 19:30.54 | LuitvD | haven't tried |
| 19:30.56 | LuitvD | will try now |
| 19:31.06 | koen | could you try it now? |
| 19:31.21 | LuitvD | [21:30] <LuitvD> will try now |
| 19:33.20 | LuitvD | no backlight :( |
| 19:33.39 | LuitvD | the E6 really needs ezx-backlight.patch removed from the patchset |
| 19:33.55 | LuitvD | cant ezx-backlight be changed to ignore E6? |
| 19:34.04 | koen | it can |
| 19:34.11 | koen | does it boot? |
| 19:34.34 | koen | or rather, does boot_usb accept it? |
| 19:34.34 | LuitvD | it seems to be booting... but I can't see what it's booting, because the screen is black |
| 19:34.40 | koen | ok |
| 19:34.48 | LuitvD | boot_usb takes it, blob takes it |
| 19:35.09 | koen | then my latest commit isn't bogus :) |
| 19:38.03 | LuitvD | so what should I do now? |
| 19:38.29 | koen | could you apply http://ewi546.ewi.utwente.nl/tmp/no-bl.patch and rebuild an rokre6 kernel? |
| 19:39.24 | LuitvD | ... |
| 19:39.38 | LuitvD | don't you think it can be a blind patch? :P |
| 19:40.02 | LuitvD | or wait... |
| 19:40.18 | LuitvD | does _rokre6 check the MACHINE ??? |
| 19:40.19 | LuitvD | :S |
| 19:40.40 | koen | it's an override for the rokre6 machine |
| 19:40.46 | LuitvD | nice |
| 19:40.58 | LuitvD | then I think it will most certainly work... |
| 19:41.08 | koen | I do to, but I want to be sure :) |
| 19:41.21 | LuitvD | lol |
| 19:42.08 | LuitvD | and how did I recompile quickly? |
| 19:42.57 | koen | bitbake -b recipe.bb -c compile -f |
| 19:43.12 | LuitvD | can't just do deploy? |
| 19:43.26 | LuitvD | I can't ever find it when I do a compile :P |
| 19:43.37 | koen | yes, but that won't run the compile again |
| 19:43.49 | koen | bitbake -b recipe.bb -c compile -f ; bitbake -b recipe.bb -c deploy -f |
| 19:44.06 | LuitvD | okay :) |
| 19:45.18 | koen | and if you remove MACHINE from local.conf you can even do MACHINE=a780 bitbake -b recipe.bb -c compile -f ; MACHINE=rokre6 bitbake -b recipe.bb -c compile -f |
| 19:45.27 | LuitvD | waiting for boot_usb |
| 19:45.41 | LuitvD | works |
| 19:45.48 | LuitvD | check for yourself, and commit ;) |
| 19:46.16 | LuitvD | already checked for a non-rokr? |
| 19:46.36 | LuitvD | or are you absolutely certain about the fact that it works? :P |
| 19:46.43 | koen | certain enough |
| 19:46.47 | koen | :) |
| 19:46.51 | LuitvD | lol, why did you make me check then? :P |
| 19:47.04 | koen | to be sure :) |
| 19:47.41 | LuitvD | riiiight :P |
| 19:47.47 | LuitvD | next? :p |
| 19:48.04 | koen | assault on precinct 13 |
| 19:48.10 | LuitvD | the kernel gives me a huge backtrace |
| 19:48.31 | LuitvD | and there's no 18BPP patch applied :P |
| 19:48.38 | LuitvD | which I really do want :P |
| 19:49.04 | koen | the patch is there, but the rokre6 file doesn't use it |
| 19:49.44 | koen | LuitvD: try this on ezx-a6.c: http://rafb.net/p/YPsmRM55.html |
| 19:49.44 | LuitvD | and the a1200 18bpp patch doesn't work for me, even if I apply it |
| 19:50.10 | koen | that should enable 18bb on the e6 |
| 19:51.04 | koen | talk to you tomorrow (or next week) |
| 19:51.12 | LuitvD | wait |
| 19:51.19 | LuitvD | where's ezx-e6.c? |
| 19:51.32 | koen | LuitvD: please report your progress (and if your mod to ezx-e6.c) |
| 19:51.35 | koen | it should be in linux-2.6.21/arch/arm/mach-pxa/ |
| 19:51.48 | LuitvD | should I patch it on a clean kernel? |
| 19:51.58 | koen | no, on a patches kernel |
| 19:52.02 | koen | patched* |
| 19:52.08 | LuitvD | then where in OE is the kernel? :P |
| 19:52.30 | koen | TMP/work/rokre6-*something*/linux-ezx-*version* |
| 19:52.55 | LuitvD | and then that bitbake stuff again? |
| 19:53.04 | LuitvD | after doing the patch? |
| 19:53.10 | koen | yes, the -c compile thingy |
| 19:53.17 | LuitvD | yay :) |
| 19:53.37 | koen | if that works (or doesn;t work), please mail the ml |
| 19:53.49 | LuitvD | I will |
| 19:53.52 | LuitvD | bye |
| 19:58.24 | *** join/#openezx neolynx (n=u@185-252-221-213-pool.dsl.fcom.ch) |
| 20:00.27 | LuitvD | aargh, edited the file, started bitbake, and it does this:NOTE: package linux-ezx-2.6.21-ezxdev-r16: task do_unpack: started |
| 20:00.27 | LuitvD | NOTE: Unpacking /home/luitvd/build/rokr/OE/downloads/linux-2.6.21.tar.bz2 to /home/luitvd/build/rokr/OE/build/tmp/angstrom/work/rokre6-angstrom-linux-gnueabi/linux-ezx-2.6.21-ezxdev-r16/ |
| 20:00.27 | LuitvD | AAARGH |
| 20:02.09 | *** join/#openezx wt (i=wt@conference/plone/docsprint/x-3d9088b6e4fdd44a) |
| 20:04.24 | LuitvD | hi wt |
| 20:07.30 | wt | hi |
| 20:09.05 | LuitvD | koen: :( patch doesn't work any better then the patch on the a1200 |
| 20:12.05 | LuitvD | can anybody help me with this (since koen is afk) ... I guess the processor doesn't know the right framebuffer location... it now has the right colours, but it doesn't use all of the screen |
| 20:13.43 | LuitvD | does anybody know how I can find the framebuffer registers? |
| 20:14.02 | LuitvD | I think .lccr0 and .lccr3 are wrong |
| 20:40.39 | *** join/#openezx flo_lap (n=fuchs@f049168007.adsl.alicedsl.de) |
| 20:44.31 | LuitvD | anybody here familiar with fb configuration? |
| 20:45.17 | LuitvD | _please_ |
| 20:45.25 | LuitvD | I'm impatient :) |
| 20:46.45 | ao2 | patience many for the force is needed |
| 20:47.30 | LuitvD | I've been trying to configure the fb correctly |
| 20:47.45 | LuitvD | ao2: do you know how to configure the pxa framebuffer correctly? |
| 20:48.10 | ao2 | (s/many/much, I can't even mimic yoda with his weird language, mine is more weird) |
| 20:48.43 | LuitvD | weird language, you speak |
| 20:48.52 | ao2 | LuitvD, I can point you to the pxa developer manual, but I do not really know how to setup those registers |
| 20:48.58 | LuitvD | XD |
| 20:49.18 | LuitvD | I think the syncing is the problem here... |
| 20:49.31 | LuitvD | the picture is stretched |
| 20:50.37 | ao2 | revert the last patch and analyse (understanding) the changes |
| 20:50.45 | LuitvD | I did... |
| 20:51.23 | LuitvD | but changing just the .bpp value makes it squashed already... |
| 20:53.52 | ao2 | what patches did you apply? |
| 20:54.17 | LuitvD | http://rafb.net/p/YPsmRM55.html |
| 20:54.34 | LuitvD | the patch that fixed the framebuffer for the a1200 |
| 20:57.16 | ao2 | let's see what the pxa manual says about those lccr |
| 20:57.41 | ao2 | you can get them here: http://pubs.gumstix.org/documents/PXA%20Documentation/PXA270/ |
| 20:58.32 | LuitvD | ao2: thanks... I'll see you again in 5 years :P |
| 20:59.28 | ao2 | I'm giving a look, but I'm not at my ease with those spec either |
| 20:59.29 | LuitvD | I think that's gonna take me a while |
| 20:59.59 | LuitvD | I just don't understand why it works for the a1200, and doesn't for my rokre6 |
| 21:05.26 | ao2 | LCD could even be 19bpp and higher for PXA, but we do not know if e6 uses those (unlikely) |
| 21:05.52 | LuitvD | 19bpp seems like a very unlikely value :P |
| 21:06.17 | LuitvD | I guess the clock is just wrong... |
| 21:06.39 | LuitvD | but I don't know how to calculate the right pixel clock value |
| 21:09.15 | *** join/#openezx TimRiker (n=timr@h4607bf2c.area7.spcsdns.net) |
| 21:25.52 | LuitvD | that datasheet is somewhat heavier than Microchip PIC datasheets :P |
| 21:26.50 | ao2 | :) |
| 21:36.46 | LuitvD | oeh, I'm getting close :D |
| 21:38.16 | LuitvD | i've got noise now, but it uses all of the screen, instead of a part of the horizontal space |
| 21:38.17 | LuitvD | :) |
| 21:39.02 | LuitvD | the pixel clock is going to fast right now, i guess |
| 22:24.58 | *** join/#openezx drath_ (i=vmaster@p5B07DCB5.dip.t-dialin.net) |
| 22:26.50 | LuitvD | wohoo, built 50 kernels in 1 day :D |