irclog2html for #openezx on 20060416

07:05.44LaF0rgemorning
08:09.34*** join/#openezx ysakaed (i=intoxica@60.234.51.252)
08:56.03stefan_schmidtmorning.
08:57.19stefan_schmidt:)
08:59.26stefan_schmidtLaF0rge: Your weblog link for bootlog goes to stuart.S .
11:55.50LaF0rge;)
13:34.12*** join/#openezx blkhawk (n=blkhawk@p548A32F2.dip0.t-ipconnect.de)
13:58.27LaF0rge:q
14:17.53blkhawk:P
15:09.08LaF0rgehi stefan
15:09.15LaF0rgei'm still fighting with head.S
15:09.37stefan_schmidtLaF0rge: hi
15:09.38LaF0rgesomehow the first function call corrupts the stack
15:09.47stefan_schmidtlong fight.
15:09.56stefan_schmidtmerged to 2.6.17-rc1?
15:10.02LaF0rgeno
15:10.06stefan_schmidtok
15:10.59stefan_schmidtLaF0rge: Just to get it right. Your devel phone boots the kernel now? Or did you change dev against day-by-day phone.
15:12.05LaF0rgeyes, it boots that kernel now after flashing a new firmware
15:12.37stefan_schmidtok, good to know if anybody have this problem again.
15:12.49stefan_schmidtDid you flash all three dev phones?
15:12.52LaF0rgeno
15:13.00LaF0rgeone phone is still not working, but I don't care
15:13.56stefan_schmidtok, if you've one with STUART working.
15:14.49stefan_schmidtI tested your stuart.S yesterday. But without serial consoles it only blanks screen. Not very interesting. ;)
15:18.10LaF0rge;)
15:18.27LaF0rgeit actually only disables the backlight, lcd should still be on
15:34.04LaF0rgeLinux version 2.6.16.5 (laforge@hanuman.de.gnumonks.org) (gcc version 3.3.2) #2 Sun Apr 16 17:33:14 CEST 2006
15:34.04LaF0rgeCPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE)
15:34.41stefan_schmidtboot?
15:34.58LaF0rgeyes
15:35.01stefan_schmidtcool
15:35.10LaF0rge2.4.14 seems to have some bugs in the arm booting code
15:35.16stefan_schmidtdamn it
15:35.23LaF0rgeso now I merge my code into 2.6.16.5 where that lowlevel code seems to be working
15:35.32stefan_schmidtwhere can i get the code to test? ;)
15:35.51LaF0rgeI'll do the merge right now.  once it shows something on the framebuffer, I'll publish it
15:36.13stefan_schmidtok, sound like a long night. :)
15:36.41LaF0rgewell, 2.6.14 and 2.6.16 are not that far from each otehr
15:38.46stefan_schmidtbut 2.6.16 has no bugs in arm booting code. ;)
16:31.39stefan_schmidtLaF0rge: You will leaving thursday to brazil, right? Will you be offline this time?
16:48.27LaF0rgetuesday
16:48.36LaF0rgeguess I'll be online every second day or so
16:52.41stefan_schmidtok, so no real ezx hacking bu communication would be possible.
16:52.58stefan_schmidtSo please release the 1.6.x code before leaving even iif it not perfectly working. :)
16:54.50stefan_schmidt2.6.x of course
17:00.36LaF0rgeyes
17:01.38LaF0rgei just completed the merge, it's compiling now
17:02.00stefan_schmidtfine
18:04.57LaF0rgeCPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE)
18:04.59LaF0rgeMachine: Motorola Ezx Platform
18:09.25*** join/#openezx stefan_ (n=stefan@p548647FE.dip.t-dialin.net)
18:21.21LaF0rgestefan:http://gnumonks.org/~laforge/tmp/zImage
18:21.27LaF0rgestefan: pls give it a try
18:30.34*** join/#openezx ao2 (n=u@2001:1418:117:0:0:0:0:1)
18:35.02ao2g r e a t
18:36.15ao2I dream to have IPv6 (and eventually MIPv6) on my phone :)
18:40.30*** join/#openezx blkhawk (n=blkhawk@p548A32F2.dip0.t-ipconnect.de)
18:43.34*** join/#openezx blkhawk (n=blkhawk@p548A32F2.dip0.t-ipconnect.de)
18:48.15stefan_schmidtLaF0rge: Beautifull. Big Tux and small font. It even does not crash. :)
18:49.37*** join/#openezx blkhawk (n=blkhawk@p548A32F2.dip0.t-ipconnect.de)
18:49.49LaF0rgestefan: yes, i'm currently working on mmc/sd and usb drivers
18:50.00stefan_schmidtcool
18:51.43stefan_schmidtusbserial?
18:58.07LaF0rgemaybe later
19:00.43blkhawkthat sounds great
19:00.54blkhawkdoes the tf card run in MMC mode?
19:01.17blkhawkif yes there is a MMC driver for the Linksyswrt54g
19:01.47LaF0rgeyes
19:01.57LaF0rgeand there is a driver in the stock kernel, no worries
19:02.03blkhawk:D
19:09.38*** join/#openezx blkhawk (n=blkhawk@p548A32F2.dip0.t-ipconnect.de)
19:37.29LaF0rgeudc seems a bit more difficult..
19:40.29*** join/#openezx blkhawk (n=blkhawk@p548A32F2.dip0.t-ipconnect.de)
19:49.34*** join/#openezx blkhawk (n=blkhawk@p548A32F2.dip0.t-ipconnect.de)
20:16.23*** join/#openezx blkhawk (n=blkhawk@p548A32F2.dip0.t-ipconnect.de)
20:50.25stefan_schmidtLaF0rge: Did echo MotNet > /proc/usb?? still work with your 2.6?
20:51.47stefan_schmidtInitrd without working shell is not really interesting.
20:53.58LaF0rgestefan: no, i don't use the motorola usbd code
20:55.03stefan_schmidtok, so initrd makes no sense now.
20:55.11LaF0rgewell, there's a serial port on my phone :)
20:55.19LaF0rgefor early development that's probably the best we've got
20:57.42stefan_schmidtof course. But this means for me blind hacking and changing initrd/init all the time i want to test something new.
20:58.30stefan_schmidtDo you see a chance to get a serial connection over usb working soon?
20:58.54stefan_schmidtI know you do something else before, but perhaps i try it on my own.
21:00.37stefan_schmidtIs there code for usbserial as usb client in the kernel already?
21:08.01LaF0rgeyes
21:10.05stefan_schmidtdrivers/usb/gadget/serial.c?
21:10.09LaF0rgeyes
21:10.17LaF0rgethat code should be fine
21:10.46stefan_schmidtIs there a hardware limitation on ezx, or should it work?
21:10.53LaF0rge;)
21:11.06LaF0rgeyou need to glue the ezx specific bits to the pxa27x udc code
21:11.16LaF0rgethat's what i'm trying right now
21:11.22LaF0rgebut it's not easy as it seems
21:11.37stefan_schmidtoh, i understand. That's what you try to doing the last hours. :)
21:11.39LaF0rgebecause the USB port of the ezx phones is multiplexed
21:12.04LaF0rgepxa27x_udc: version 21-Jul-2005
21:12.04LaF0rgeUSB cmd disconnect
21:12.04LaF0rgegs_bind: cannot autoconfigure on pxa27x_udc
21:12.04LaF0rgeudc: bind to driver g_serial --> error -19
21:12.04LaF0rgegs_module_init: cannot register gadget driver, ret=-19
21:12.09LaF0rgethat's all i get at this point
21:14.53stefan_schmidtI'am right it's the stuff in pxa2xx_udc.c
21:14.54stefan_schmidt?
21:15.17LaF0rgeyes
21:15.19LaF0rgeno
21:15.20stefan_schmidtCopyright (C) 2003 Robert Schwebel, Pengutronix
21:15.20stefan_schmidt<PROTECTED>
21:15.24LaF0rgepxa27xx_udc
21:15.29LaF0rgepxa27x_udc
21:15.34LaF0rgethe 2xx is only for 250-262
21:15.45LaF0rgeyou need to grab it from handhelds.org cvs
21:15.49stefan_schmidtdamn
21:16.14stefan_schmidti know Robert Schwebel and Benedikt Spranger personally. Perhaps they could help.
21:16.44stefan_schmidtok, i searched it in vanilla kernel tree.
21:19.00stefan_schmidtThe guys hanging around at #ptxdist. bene42__ and rschwebel
21:21.30stefan_schmidtLaF0rge: Should i ask the guys or would you try it on your own first?
21:21.56LaF0rgeit's not about the driver
21:21.59*** join/#openezx blkhawk (n=blkhawk@p548A32F2.dip0.t-ipconnect.de)
21:22.06LaF0rgeit's about understanding the phone specific bits from the 2.4.x source
21:26.44stefan_schmidtok
21:55.01LaF0rgeok, now I think I know what the problem is
21:55.10LaF0rgepxa27x is a crappy udc
21:55.18LaF0rgeit tries to do too many things in hardware
21:55.34SuNIsn't that normally good?
21:58.47stefan_schmidtx en de constrains
21:59.00stefan_schmidtsorry wrong tab
22:00.06stefan_schmidtSuN: from pxa27x_udc.c
22:00.14stefan_schmidtThis UDC hardware wants to implement a bit too much USB protocol, so
22:00.14stefan_schmidt<PROTECTED>
22:00.14stefan_schmidt<PROTECTED>
22:00.14stefan_schmidt<PROTECTED>
22:01.01LaF0rgenow it's 30% working
22:01.07SuNNot good, heh.
22:01.09LaF0rgethe host doesn't recognize the device yet
22:01.17LaF0rgebut i see packets flowing back and forth
22:01.35LaF0rgeusb 5-3.4.2: device not accepting address 95, error -32
22:02.20LaF0rgelet's try ohci instead of ehci host
22:03.05LaF0rgemh, even worse
22:27.14*** join/#openezx blkhawk[zzz] (n=blkhawk@p548A1BA3.dip0.t-ipconnect.de)
23:35.09*** join/#openezx jonwil (n=jonwil@220-244-120-190.static.tpgi.com.au)
23:35.54stefan_schmidthi
23:37.09jonwilhi
23:47.28stefan_schmidtwebmind: Would it be possible that topic reflect the actually devel state? Means first 2.6.16.5 kernel boot? Would be nice.
23:49.27webmindsure
23:49.34webmindhold on
23:52.55webmindstefan_schmidt, you're now a channel op
23:53.23stefan_schmidtwebmind: thanks
23:56.15stefan_schmidtwebmind: hmm, #openezx :You need to be a channel operator to do that
23:56.27webmindhmm
23:56.44webmind[*!n=stefan@*.net] has been added to the access list for #openezx with level [26]
23:57.09webmindcmdop is level 10
23:57.35SuNMaybe do /cs op #openezx stefan_schmidt first?
23:57.47SuNIf that's the right order :)
23:58.23*** mode/#openezx [+o stefan_schmidt] by ChanServ
23:58.30*** topic/#openezx by stefan_schmidt -> work in progress | first kernel 2.6.16.5 kernel boots | http://wiki.openezx.org/Main_Page | http://planet.openezx.org/
23:58.42stefan_schmidtthanks again
23:58.59webmindstefan_schmidt, did you try that yourself aswell or ?
23:59.11*** topic/#openezx by stefan_schmidt -> work in progress | first 2.6.16.5 kernel boots | http://wiki.openezx.org/Main_Page | http://planet.openezx.org/
23:59.16*** mode/#openezx [+o webmind] by ChanServ
23:59.19webmind<PROTECTED>
23:59.35stefan_schmidtwebmind: no, i don't know much about irc.

Generated by irclog2html.pl by Jeff Waugh - find it at freshmeat.net! Modified by Tim Riker to work with blootbot logs, split per channel, etc.