| 00:00.59 | DocScrutinizer | I'll start with semi-asshat answer: man 7 regex :-P |
| 00:01.24 | Estel_ | :P |
| 00:01.28 | Estel_ | will read it |
| 00:01.30 | Estel_ | through |
| 00:01.38 | Estel_ | http://sebsauvage.net/paste/?ead3931098e1bfa9#GZHCNnklBf2N8Fm2v0AeV5+st28zLC6jxoVcSBSA/Bc= |
| 00:01.44 | Estel_ | why this shit doesn't work? |
| 00:01.55 | Estel_ | command itself is ok, I mean sed |
| 00:02.20 | *** join/#maemo APTX (APTX@unaffiliated/aptx) |
| 00:02.23 | Estel_ | I want sed to insert my (merlin's ;) ) beautiful complicated commands into rcS-late |
| 00:02.38 | Estel_ | orally or anally, no mater. but sed is driving me mad |
| 00:02.46 | DocScrutinizer | try sed -i "$forsed" |
| 00:02.53 | Estel_ | as You can see by bullshit 'm writing |
| 00:02.55 | Estel_ | dafuq? |
| 00:03.12 | Estel_ | ah |
| 00:03.15 | Estel_ | will try |
| 00:03.24 | Estel_ | but it will make it sit inside "''" |
| 00:03.33 | Estel_ | as forsed got ' at end and beginning |
| 00:03.47 | DocScrutinizer | no, it doesn't |
| 00:03.55 | DocScrutinizer | I think |
| 00:04.41 | *** join/#maemo lopz (~jjlc@unaffiliated/lopz) |
| 00:04.59 | *** join/#maemo kraft (kraft@gateway/shell/blinkenshell.org/x-kduzavlvcrpbobdm) |
| 00:04.59 | DocScrutinizer | jr@halley:~> forsed='1!N; s@ /sbin/swapon -a || echo "Failed to enable paging partition."@blkid -g\nblkid | grep $swap0.*TYPE=\"swap\" && /sbin/swapon $swap0 || /sbin/swapon $swap2@' |
| 00:05.00 | DocScrutinizer | jr@halley:~> echo ">>$forsed<<" |
| 00:05.02 | DocScrutinizer | >>1!N; s@ /sbin/swapon -a || echo "Failed to enable paging partition."@blkid -g\nblkid | grep $swap0.*TYPE=\"swap\" && /sbin/swapon $swap0 || /sbin/swapon $swap2@<< |
| 00:05.10 | *** join/#maemo Vanadis (~Vanadis@46-126-8-235.dynamic.hispeed.ch) |
| 00:05.55 | DocScrutinizer | sorry, gotta sleep |
| 00:06.12 | Estel_ | no problem, good night |
| 00:06.20 | Estel_ | now it works but give fckd results |
| 00:06.40 | Estel_ | inserts $swap0 instead of it's content |
| 00:06.47 | Estel_ | + do other weird shit |
| 00:07.47 | Estel_ | instead of replacing line, it makes it: |
| 00:08.01 | Estel_ | blkid | grep $swap0.*TYPE="swap" /sbin/swapon -a || echo "Failed to enable paging partition." /sbin/swapon -a || echo "Failed to enable paging partition." /sbin/swapon $swap0 || /sbin/swapon $swap2 |
| 00:08.08 | Estel_ | while effect should be: |
| 00:08.51 | Estel_ | blkid | grep $swap0.*TYPE=\"swap\" && /sbin/swapon /dev/mmcblk1p2 || /sbin/swapon /dev/mmcblk0p7 |
| 00:09.12 | Estel_ | blkid | grep $/dev/mmcblk1p2*TYPE=\"swap\" && /sbin/swapon /dev/mmcblk1p2 || /sbin/swapon /dev/mmcblk0p7 |
| 00:09.14 | Estel_ | in fact |
| 00:09.36 | Estel_ | ~kill sed |
| 00:09.36 | infobot | ACTION shoots a charged pseudograviton gun at sed |
| 00:10.07 | Estel_ | merlin1991, You're probably asleep already? |
| 00:10.10 | DocScrutinizer | http://tldp.org/LDP/abs/abs-guide.pdf |
| 00:11.11 | DocScrutinizer | Estel_: shell expands, unless enclosed in ' ' |
| 00:11.14 | merlin1991 | Estel_: nah still here |
| 00:11.37 | Estel_ | thanks godness. Oh, and DocScrutinizer is lunatic |
| 00:11.38 | DocScrutinizer | '$foo' -> $foo |
| 00:11.50 | DocScrutinizer | "$foo" -> bar |
| 00:12.08 | Estel_ | so how to format this fckd sed command |
| 00:12.23 | Estel_ | merlin1991, it gives me and DocScrutinizer headache |
| 00:12.36 | DocScrutinizer | foo="this ->\" is an doubletick" |
| 00:12.40 | Estel_ | or just me, who knows |
| 00:12.49 | merlin1991 | dunno I never did sed stuff so far :D |
| 00:12.54 | Estel_ | :P |
| 00:13.19 | DocScrutinizer | echo $foo -> this " is an doubletick |
| 00:13.26 | Estel_ | so how would You make script that find line in rcS-late and replace it with our beautiful work |
| 00:13.31 | Estel_ | (i.e. script cooked earlier) |
| 00:14.17 | Estel_ | DocScrutinizer, but inside script there is also escaped part required |
| 00:14.31 | Estel_ | I'm just lost how to make sed interpret it properly |
| 00:14.48 | DocScrutinizer51 | inside escapes escapes neewd to be escaped |
| 00:14.50 | DocScrutinizer51 | lol |
| 00:14.56 | Estel_ | 0_o |
| 00:14.59 | Estel_ | *TYPE=\"swap\" |
| 00:15.06 | Estel_ | this part need to be passed to edited file |
| 00:15.09 | Estel_ | not escaped |
| 00:15.12 | merlin1991 | reminds me of how to regex match a \ in java |
| 00:15.28 | DocScrutinizer51 | echo "\"\\\\"" |
| 00:15.29 | merlin1991 | Patter.Compile("\\\\"); <-- awesome stuff right there |
| 00:16.03 | Estel_ | DocScrutinizer, wtf? |
| 00:16.09 | Estel_ | forsed='1!N; s@ /sbin/swapon -a || echo "Failed to enable paging partition."@blkid -g\nblkid | grep $swap0.*TYPE=\"swap\" && /sbin/swapon $swap0 || /sbin/swapon $swap2@' |
| 00:16.18 | Estel_ | Failed to enable paging partition."@blkid -g\nblkid | grep $swap0.*TYPE=\"swap\" && /sbin/swapon $swap0 || /sbin/swapon $swap2@' |
| 00:16.25 | Estel_ | wtf |
| 00:16.29 | Estel_ | sorry, wrong quote |
| 00:17.52 | Estel_ | http://sebsauvage.net/paste/?c4e3aa202e012ba1#gh42uDO/Tt63XcVfUsHKexKkJvQMvWJ2cVcQITvKHR4= |
| 00:17.56 | Estel_ | whats wrong with this |
| 00:18.04 | Estel_ | i.e. should this shit should look |
| 00:18.18 | Estel_ | is head desking |
| 00:18.35 | Estel_ | I just *must* finish this shit today and upload *madness* |
| 00:18.42 | Estel_ | i mean tonight :P |
| 00:18.57 | Estel_ | then I can ~kill sed |
| 00:19.06 | DocScrutinizer51 | WRONG approach |
| 00:19.17 | Estel_ | probably, but no patch in busybox |
| 00:19.28 | DocScrutinizer51 | if it gets tough today, ship next week |
| 00:19.41 | Estel_ | ah, it's what You mean. Yea, I know |
| 00:19.57 | Estel_ | but seriously, it's damn last thing before packaging :P |
| 00:20.05 | Estel_ | literally last |
| 00:20.18 | DocScrutinizer51 | nope |
| 00:20.45 | DocScrutinizer51 | last thing is let it ripe 3 days, and some 2 friends test it |
| 00:20.57 | Estel_ | need to package it before that |
| 00:21.02 | Estel_ | packaging != repos |
| 00:21.24 | Estel_ | would be silly to let it test 3 days then make bug while packaging |
| 00:21.41 | DocScrutinizer51 | aure |
| 00:21.49 | Estel_ | btw, I'm using main part for a year or so. it's just that fuckin one-time-run script that needs finishing |
| 00:22.22 | Estel_ | it's all because I decided to make really easy to use package, without instruction to manually edit rcS-Late before use |
| 00:22.52 | Estel_ | user just provide locations in config , and run one timer. It handles updating rcS-late |
| 00:23.16 | Estel_ | then, You can eternally use what is main part of this package - well-tested rock solid scripts to refresh swap |
| 00:23.40 | Estel_ | and of course this "small addition" to make rcS-late edit is driving me mad |
| 00:23.50 | Estel_ | but, seriously, do You have idea how to fix that? |
| 00:23.58 | Estel_ | (see last zerobin) |
| 00:27.54 | Estel_ | trying different approaches to fight with sed |
| 00:32.20 | DocScrutinizer51 | jumps out of bed again |
| 00:32.56 | DocScrutinizer51 | Estel_: it's definitely are questionable idea to edit rcS-* |
| 00:33.23 | Estel_ | no problem, this package is also for that |
| 00:33.33 | Estel_ | and doesn't do it automaticaly |
| 00:33.47 | Estel_ | user can do it by hand if willing to or not do at all |
| 00:33.52 | *** join/#maemo lxp1 (~lxp@212-183-124-241.adsl.highway.telekom.at) |
| 00:33.58 | Estel_ | (yet, many things wont work if not done) |
| 00:34.26 | Estel_ | it just contain instruction to edit config file and run adjust-rcS-late.sh script only once |
| 00:35.08 | Estel_ | I'll also add line writing counter from iostat to have info about data written to swap |
| 00:35.16 | Estel_ | anyway, it's onlhy one sane approach to it |
| 00:35.26 | Estel_ | other would be to use /event.d/ script |
| 00:35.32 | Estel_ | but it would slow down boot |
| 00:35.40 | Estel_ | as swap would be enabled by rcS-late |
| 00:35.52 | Estel_ | then disabled and enabled (other) via scfript in event.d |
| 00:35.59 | Estel_ | idiotic + time consuming |
| 00:36.46 | Estel_ | btw I use rcS-late editing approach for ages it doesn't bring any problems |
| 00:37.00 | Estel_ | if done correctly |
| 00:37.14 | Estel_ | and I swant to spare people bootlops due to typos while editing manualy |
| 00:38.26 | DocScrutinizer51 | learn about upstart and sysV init. then better find a way that doesn't involve editing core initscripts |
| 00:39.30 | DocScrutinizer51 | insert a own inotscript that runs before rcS-late and edits fstab accordingly |
| 00:40.08 | DocScrutinizer51 | add a script to undo swap mounting done by rc+-late |
| 00:40.13 | *** join/#maemo Vanadis (~Vanadis@46-126-8-235.dynamic.hispeed.ch) |
| 00:40.37 | DocScrutinizer51 | editing core stuff is EVIL |
| 00:46.39 | *** join/#maemo xev (~xev@unaffiliated/xev) |
| 00:46.58 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-62-10-94-75.clienti.tiscali.it) |
| 00:53.48 | Estel_ | honestly, something that mess with fstab just to cheat rcS-late is more EVIL |
| 00:54.32 | Estel_ | if I have to choose between holy way editing script that got executed once on boot and then is just a file sitting on disk... |
| 00:54.51 | Estel_ | ...or fstab, on which many things could rely... |
| 00:54.55 | *** join/#maemo LaoLang_cool (~LaoLang_c@221.226.175.139) |
| 00:55.00 | Estel_ | I preffer option 1 |
| 00:55.17 | Estel_ | anyway, fighting with sed goes better and better, I think I'm close to finding it |
| 01:00.38 | freemangordon | damn, there was an earthquake here :( |
| 01:08.20 | *** join/#maemo Sazpaimon (~wat@c-68-32-195-80.hsd1.pa.comcast.net) |
| 01:13.35 | *** join/#maemo gri (~gri@muhkuh.net) |
| 01:13.39 | *** join/#maemo uen| (~uen@p5DCB2792.dip.t-dialin.net) |
| 01:18.56 | *** join/#maemo beford (~fernando@unaffiliated/beford) |
| 01:21.19 | Estel_ | freemangordon, not fatal one I hope? |
| 01:21.39 | Estel_ | sed -i \'$forsed\' /home/user/original-rcS-late |
| 01:21.50 | Estel_ | sed: unsupported command ' |
| 01:21.54 | *** join/#maemo Vanadis__ (~Vanadis@46-126-8-235.dynamic.hispeed.ch) |
| 01:21.56 | freemangordon | no, nothing serious, just a little frightening |
| 01:21.56 | Estel_ | what the fuckin fuck? |
| 01:21.59 | Estel_ | I see |
| 01:22.08 | Estel_ | here= where? |
| 01:22.15 | freemangordon | 5.6-6 or something |
| 01:22.23 | Estel_ | not very light either |
| 01:22.28 | freemangordon | Sofia |
| 01:23.07 | Estel_ | it apparently talks about \', because if i change it to \", it complains about unsupported command " |
| 01:23.26 | Estel_ | hm, should't Sofia be out of earthquakes zone? |
| 01:24.05 | Estel_ | still, I've no idea how the fuck it interprets this ' as command, as without it, it complains about unmatched @ (content of $forsed) |
| 01:24.11 | Estel_ | ~kill sed |
| 01:24.12 | infobot | ACTION shoots a hyper-charged anti-photon gun at sed |
| 01:24.21 | Estel_ | ~kill sed |
| 01:24.21 | infobot | ACTION shoots a hyper-charged anti-quark gun at sed |
| 01:24.31 | Estel_ | ~kill sed |
| 01:24.31 | infobot | ACTION shoots a ionized proton gun at sed |
| 01:24.52 | Estel_ | why, ah why busybox doesn't contain "patch" |
| 01:25.05 | Estel_ | ~suicude sed |
| 01:25.15 | Estel_ | ~die sed |
| 01:25.15 | infobot | ACTION murders sed, takes two shots to the head then crumples to the ground, lifeless... |
| 01:25.49 | Estel_ | ~annihilate sed |
| 01:25.49 | infobot | ACTION bakes a cake and gives it to sed |
| 01:25.53 | Estel_ | LOL |
| 01:26.05 | Estel_ | I'm fighting with this shit for few hours already |
| 01:26.09 | Estel_ | 3 or 4 |
| 01:26.19 | Estel_ | headdesk |
| 01:26.35 | Estel_ | s/headdesk/headdesks |
| 01:26.38 | Estel_ | s/headdesk/headdesks/ |
| 01:26.44 | Estel_ | fu |
| 01:26.44 | beford | hah |
| 01:27.21 | Estel_ | no, seriously, I'm out of ideas |
| 01:27.29 | Estel_ | how to make sed properly interpret: |
| 01:28.53 | Estel_ | sed -i 's@ /sbin/swapon -a || echo "Failed to enable paging partition."@blkid -g\nblkid | grep $swap0.*TYPE=\"swap\" && /sbin/swapon $swap0 || /sbin/swapon $swap2@' /etc/event.d/rcS-late |
| 01:29.04 | Estel_ | I've properly escaped scapes inside escapes |
| 01:29.07 | Estel_ | which gave me |
| 01:29.16 | Estel_ | with usage of $env |
| 01:29.28 | Estel_ | forsed="s@ /sbin/swapon \-a || echo \"Failed to enable paging partition.\"@blkid \-g\nblkid | grep $swap0.*TYPE=\\\"swap\\\" && /sbin/swapon $swap0 || /sbin/swapon $swap2@" |
| 01:29.41 | Estel_ | sed -i \'$forsed\' /home/user/original-rcS-late |
| 01:29.51 | Estel_ | ...yet this unholy shit still doesn't work |
| 01:30.04 | Estel_ | any idea, anyone? pleeease? |
| 01:30.12 | Estel_ | ~murder sed |
| 01:30.12 | infobot | ACTION shoots sed in his sleep |
| 01:31.08 | Estel_ | ~assasinate sed |
| 01:31.16 | Estel_ | ~rape sed |
| 01:31.16 | infobot | ACTION takes sed behind the WallMart and makes a few grunts and screams |
| 01:31.36 | Estel_ | ~sodomize sed |
| 01:31.42 | Estel_ | ~seed sed |
| 01:32.12 | Estel_ | no really. I'm out of today, this shit just ain't gonna work for now :( |
| 01:32.22 | Estel_ | s/of/for/ |
| 01:32.40 | beford | hold on |
| 01:32.44 | Estel_ | ? |
| 01:33.02 | beford | do you have the original file? |
| 01:33.11 | beford | i mean, pastebin it so I can see and give it a try |
| 01:33.26 | Estel_ | I'm little angry, as it's last part of work needed to upload bigger package |
| 01:33.28 | Estel_ | ok, but |
| 01:33.34 | Estel_ | do You mean script |
| 01:33.39 | Estel_ | or file to be edited |
| 01:33.43 | Estel_ | by sed |
| 01:33.47 | beford | the file to be edited, and the line you wnat to change |
| 01:33.49 | beford | want* |
| 01:33.57 | Estel_ | ok, pastebinning |
| 01:35.18 | Estel_ | file to be edited |
| 01:35.20 | Estel_ | http://sebsauvage.net/paste/?2c697dcc486362c1#G25BFmY3qhTXSyDCr1vbnYnf+3E70eumrD0bDnzKEXo= |
| 01:37.06 | Estel_ | editing script (well, make shit version, as it's part of complex script set, normally) |
| 01:37.38 | Estel_ | http://sebsauvage.net/paste/?24a1e04d862b42df#hRgaptuujC3WAviw/DIjNEuftrPmbATtGyPPD51ZNZ4= |
| 01:38.03 | Estel_ | ..and, finally, line to be editd and how it should look after edit: |
| 01:38.45 | beford | line 52 |
| 01:40.07 | Estel_ | http://sebsauvage.net/paste/?b1bf09d1dfcf58f9#R233nu+06ujjLg8dRINFkmwFvzL5oVSc2a8kH6PqOKg= |
| 01:40.32 | Estel_ | yea, 52 to be edited |
| 01:40.38 | Estel_ | and replaced by 2 lines |
| 01:40.57 | Estel_ | already managed to get info about working multi-lining in sed etc... |
| 01:41.20 | beford | isn't it unsafe to edit system scripts though? |
| 01:41.45 | Estel_ | last things is script that will read config file (i replacedd this by declaring values, in makeshift script) and modify rc$-late accordingly |
| 01:41.52 | Estel_ | it's unsafe to make typos during edit |
| 01:42.16 | Estel_ | although, I've almost finished program (set of scripts) mean't to easy refreshing of swap |
| 01:42.30 | Estel_ | + it allows to set arbitrary swaps on boot |
| 01:42.52 | Estel_ | for both tasks editing rcS-late is necessary and wanted |
| 01:43.14 | Estel_ | I want to save editing rcS-lated manually for end users |
| 01:43.24 | *** join/#maemo Sazpaimon_ (~wat@c-68-32-195-80.hsd1.pa.comcast.net) |
| 01:43.29 | Estel_ | and prepare script that, once config if filled by user, will do it for them |
| 01:43.39 | beford | automagically yea |
| 01:43.45 | Estel_ | would be trivial with patch, but patch isn't part of busybox |
| 01:44.14 | Estel_ | not exactly automagically, user need explicitly invoke adjust-rcS-late.sh script ;) |
| 01:44.40 | Estel_ | program manual and description in package manager will state to edit config and run script once |
| 01:44.57 | Estel_ | problem - can't force sed to work properly |
| 01:45.07 | Estel_ | huge thanks if You manage to find it |
| 01:45.30 | Estel_ | btw,set -xv bit is to show output in console, so You see shat actually is passed to sedd by sh |
| 01:45.52 | Estel_ | many tricky things with " and \ that need to be escaped from shell or sed |
| 01:46.07 | Estel_ | (in order to get into file that's edited) |
| 01:46.21 | Estel_ | thats why my current workshop version looks like that: |
| 01:46.47 | Estel_ | ...what You found in adjust-rcS-late that I've zerobin'ned before |
| 01:46.53 | Estel_ | it *almost* work |
| 01:47.19 | Estel_ | arguments are escaped correctly etc... just freaking sed is shitting about unsupported argument ' |
| 01:47.52 | Estel_ | if I replace \'$forsed\' with \"$forsed\"... |
| 01:48.09 | Estel_ | it complains about "unsupported option " |
| 01:48.14 | Estel_ | unsupported " |
| 01:48.30 | Estel_ | so it's clearly related to \'$forsed\' |
| 01:51.45 | *** join/#maemo pigeon (~pigeon@eth5284.nsw.adsl.internode.on.net) |
| 01:53.18 | *** join/#maemo hurbu (~hurbanza@81-174-24-184.dynamic.ngi.it) |
| 02:01.48 | Estel_ | beford, hard times with sed, eh? |
| 02:03.08 | beford | tries hard |
| 02:05.58 | Estel_ | too |
| 02:09.53 | *** join/#maemo APTX (APTX@unaffiliated/aptx) |
| 02:10.38 | *** join/#maemo FredrIQ (~FIQ@unaffiliated/fiq) |
| 02:10.54 | Estel_ | I don't get whysed cares for content between @ @ @ |
| 02:11.13 | Estel_ | if it would think it's not proper syntax, it would complain for unmatched @ |
| 02:11.41 | Estel_ | yet, it doesn't so he knows it's command to sed |
| 02:11.49 | Estel_ | so why he fuckin cares about inside? |
| 02:12.01 | Estel_ | I must escape -a inside swapon -a |
| 02:12.12 | Estel_ | or sed complains about unknown option a |
| 02:12.38 | *** join/#maemo DrGrov (~C.J@a91-153-77-41.elisa-laajakaista.fi) |
| 02:12.48 | Estel_ | but, if this shithead know that it's string for replace - and he know, as he don't complain about unmatched @ - why he keeps bitching about it? |
| 02:13.38 | Estel_ | after 5 hours of fighting with it I'm getting murderous instincts against sed and it's creators |
| 02:14.50 | *** join/#maemo krau (~krau@2001:4978:20e::1) |
| 02:20.06 | cehteh | heh |
| 02:20.19 | cehteh | sorry i am too tired else i may help :P |
| 02:21.33 | luke-jr | https://dl.dropbox.com/u/726501/recaptcha.png |
| 02:23.20 | cehteh | i must be some machine .. i almost never manage to deciper recaptchas |
| 02:31.00 | *** join/#maemo pcfe_ (~quassel@redhat/pcfe) |
| 02:36.09 | *** join/#maemo t_s_o (~tso@202.84-48-230.nextgentel.com) |
| 02:39.37 | *** part/#maemo DrGrov (~C.J@a91-153-77-41.elisa-laajakaista.fi) |
| 02:42.09 | Estel_ | beford, how hacking this is going? failure here :( |
| 02:42.57 | Sc0rpius | what are we hacking? |
| 02:44.59 | Sc0rpius | did you fix your sed script? |
| 02:45.36 | *** join/#maemo GeorgeH (~George@c-69-141-105-145.hsd1.nj.comcast.net) |
| 02:46.02 | Estel_ | Sc0rpius, nope |
| 02:46.03 | Estel_ | sed is |
| 02:46.10 | Estel_ | ~murder sed |
| 02:46.10 | infobot | ACTION shoots sed in his sleep |
| 02:46.19 | Sc0rpius | sed is great |
| 02:46.23 | Estel_ | yea? |
| 02:46.26 | Sc0rpius | let's see what you're doing wrong |
| 02:46.29 | Estel_ | wanna change Your mind? |
| 02:46.31 | Estel_ | thanks |
| 02:46.39 | Estel_ | I'll send You zerobins |
| 02:47.16 | Sc0rpius | sed -i 's@ /sbin/swapon -a || echo "Failed to enable paging partition."@blkid -g\nblkid | grep $swap0.*TYPE=\"swap\" && /sbin/swapon $swap0 || /sbin/swapon $swap2@' |
| 02:47.21 | Sc0rpius | that line doesn't work as you expect, right? |
| 02:47.23 | Estel_ | file to be edited: |
| 02:47.25 | Estel_ | http://sebsauvage.net/paste/?2c697dcc486362c1#G25BFmY3qhTXSyDCr1vbnYnf+3E70eumrD0bDnzKEXo= |
| 02:47.35 | Estel_ | editing script (well, make shit version, as it's part of complex script set, normally): |
| 02:47.46 | Estel_ | http://sebsauvage.net/paste/?24a1e04d862b42df#hRgaptuujC3WAviw/DIjNEuftrPmbATtGyPPD51ZNZ4= |
| 02:47.55 | Estel_ | ..and, finally, line to be editd and how it should look after edit: |
| 02:48.03 | Estel_ | http://sebsauvage.net/paste/?b1bf09d1dfcf58f9#R233nu+06ujjLg8dRINFkmwFvzL5oVSc2a8kH6PqOKg= |
| 02:48.04 | beford | i thinkg i did it |
| 02:48.07 | beford | think |
| 02:48.07 | beford | xD |
| 02:48.10 | beford | not sure |
| 02:48.22 | Estel_ | If You manage to fix it I'll call You sedking |
| 02:48.27 | Estel_ | beford, dafuq? |
| 02:48.32 | Estel_ | lemme check |
| 02:48.37 | Estel_ | paste it please :D |
| 02:48.42 | Sc0rpius | ok let's see |
| 02:48.52 | beford | http://paste2.org/p/2031236 |
| 02:49.52 | Estel_ | beford, ommiting -i is necessary? |
| 02:50.32 | Sc0rpius | it should add two lines? |
| 02:50.34 | beford | oh I ommited it to avoid having to restore the original file |
| 02:50.40 | beford | it should work anyway |
| 02:50.40 | Sc0rpius | replace swapon line for two lines? |
| 02:50.42 | beford | checks |
| 02:51.43 | Sc0rpius | your script works, you just need to scape | and $ lemme show you: |
| 02:52.07 | Estel_ | Sc0rpius, yea, two lines |
| 02:52.20 | Estel_ | sorry I'm checking... hm? |
| 02:52.30 | beford | mine works with -s |
| 02:52.32 | beford | I mean -i |
| 02:52.33 | Estel_ | scape | and $? |
| 02:54.41 | *** join/#maemo mavhc (~mavhc@cpc3-basf10-2-0-cust617.12-3.cable.virginmedia.com) |
| 02:54.47 | Sc0rpius | sed "s@/sbin/swapon \-a || echo \"Failed to enable paging partition.\"@blkid \-g\n\tblkid \| grep $swap0.*TYPE=\\\"swap\\\" \&\& /sbin/swapon \$swap0 \|\| /sbin/swapon \$swap2@" file |
| 02:54.52 | Sc0rpius | that one works for me (file is your file). |
| 02:54.58 | *** join/#maemo radic_ (~radic@dslb-178-002-208-007.pools.arcor-ip.net) |
| 02:55.25 | Estel_ | beford, for some reason don't find necessary line, yet at least, doesn't throw errors |
| 02:55.35 | Estel_ | Sc0rpius, lemme check... |
| 02:55.40 | Sc0rpius | check, it'll work |
| 02:56.01 | Estel_ | I belive, I'm checking what was wrong, trying to learn |
| 02:56.21 | Sc0rpius | $things in the second part of the sed are variables |
| 02:56.27 | Sc0rpius | you didn't escape those |
| 02:56.35 | Sc0rpius | I can do things like this: |
| 02:56.39 | beford | I though he wanted to escape them? |
| 02:56.43 | beford | thought* |
| 02:56.45 | Estel_ | right, see it |
| 02:56.55 | Sc0rpius | sed s/I'll print just this:(.*)+/$0/ |
| 02:56.59 | beford | http://sebsauvage.net/paste/?b1bf09d1dfcf58f9#R233nu+06ujjLg8dRINFkmwFvzL5oVSc2a8kH6PqOKg= |
| 03:00.39 | Estel_ | Sc0rpius, huge thanks, but something is still wrong... |
| 03:00.40 | *** join/#maemo dockane_ (~dockane@dsdf-4db5c843.pool.mediaWays.net) |
| 03:00.46 | Estel_ | it doesn't replace anything |
| 03:00.52 | Sc0rpius | what OS are you using? |
| 03:00.53 | Estel_ | or my file got fcked somehow |
| 03:00.57 | Estel_ | Maemo :P |
| 03:01.03 | Estel_ | doing everything on device |
| 03:01.19 | Estel_ | I'll restore file from pastebin I've sent You |
| 03:01.34 | Estel_ | maybe during trial and error I've failed to restore original content at some point |
| 03:01.44 | Estel_ | I'm fighting with it for freaking 6 hours |
| 03:02.02 | Estel_ | beford for 1,5 hour too :P |
| 03:02.14 | beford | it works here |
| 03:02.22 | beford | challenge solved |
| 03:02.23 | beford | xD |
| 03:02.30 | beford | let me ssh to the n900 and check |
| 03:03.51 | Sc0rpius | it works ok here with the file |
| 03:04.04 | Estel_ | Sc0rpius, zerobin links give me - after pasting - output without new lines |
| 03:04.24 | Estel_ | could You please re send me my own file :P as my own link doesnt work for me? |
| 03:04.31 | Sc0rpius | yeah it sucks but there's a workaround |
| 03:04.33 | Sc0rpius | press Clone |
| 03:04.36 | Sc0rpius | and copy/paste from there |
| 03:04.38 | Estel_ | lol |
| 03:04.40 | Estel_ | thanks |
| 03:05.23 | *** join/#maemo cyborg-one (1000@212-178-0-156.broadband.tenet.odessa.ua) |
| 03:06.16 | beford | wors on the n900 for me |
| 03:06.36 | Estel_ | yea, it works! Sc0rpius and beford, You're my heroes ;) |
| 03:06.47 | Sc0rpius | if you want to be purist |
| 03:06.55 | Estel_ | small glitch only - need more escaping on TYPE=/"swap/" |
| 03:06.59 | Estel_ | ? |
| 03:07.01 | Sc0rpius | you can replace \t for the blank spaces you need to be in the exact indentation |
| 03:07.03 | Estel_ | but I'll manage |
| 03:07.15 | beford | yes |
| 03:07.17 | beford | more scaping |
| 03:07.22 | beford | http://pastie.org/3947969 |
| 03:07.31 | Estel_ | wait, wait, what \t |
| 03:07.44 | Sc0rpius | the script was a \n\t (a tab after the newline) |
| 03:08.05 | Estel_ | I see |
| 03:08.07 | Estel_ | yes yes |
| 03:08.10 | Sc0rpius | here: \n\tblkid |
| 03:08.11 | Estel_ | found it |
| 03:08.29 | Sc0rpius | you can replace \t for several spaces so it's just below the previous line in perfect identantion |
| 03:08.32 | Estel_ | and I can delete /t with exact number of spaces? |
| 03:08.38 | Estel_ | \t is tab, yep? |
| 03:08.40 | Sc0rpius | yeah |
| 03:08.50 | Sc0rpius | but tab is 8 spaces |
| 03:08.52 | Sc0rpius | and you need 6 |
| 03:09.50 | Estel_ | I noticed small problem |
| 03:09.59 | Estel_ | $swap2 is passed like that |
| 03:10.04 | Estel_ | not it's value |
| 03:10.11 | Estel_ | probably something easy will check that |
| 03:10.33 | beford | its being scaped |
| 03:10.38 | Sc0rpius | I thought you wanted literal $swap0 and $swap2 |
| 03:10.40 | beford | remove \ before $ |
| 03:10.54 | Sc0rpius | then they will be empty |
| 03:11.11 | beford | he had them defined on his script |
| 03:11.14 | Sc0rpius | because $swap0 and $swap2 will be sed variables not the outer script variables |
| 03:11.24 | Sc0rpius | oh and THAT'S a problem difficult to solve |
| 03:11.43 | *** join/#maemo sasquatch (~username@p4FF2D8DD.dip.t-dialin.net) |
| 03:11.47 | Estel_ | Sc0rpius, maybe just |
| 03:11.48 | Sc0rpius | nah it will work. |
| 03:11.50 | Sc0rpius | it will work |
| 03:11.53 | Sc0rpius | I just tested it |
| 03:12.01 | Sc0rpius | export swap2="ANYTHING" |
| 03:12.04 | Estel_ | create $forsed variable to feed sed |
| 03:12.09 | Sc0rpius | and then ran the script without the \ before the $ |
| 03:12.10 | Sc0rpius | and it worked |
| 03:12.17 | Estel_ | ok |
| 03:12.21 | Estel_ | thanks... |
| 03:12.28 | Estel_ | yetp why swap0 is properly translated |
| 03:12.32 | Estel_ | and swap2 not? |
| 03:12.52 | Estel_ | export should be just one line above sed? |
| 03:13.19 | Estel_ | btw, why blkid || grep works as blkid \| grep |
| 03:13.34 | Estel_ | i.e. one escape one pipe = two pipes as result? |
| 03:13.43 | Sc0rpius | heh that's funny |
| 03:13.51 | Sc0rpius | use swap3 instead of swap0 and it will work |
| 03:13.55 | *** join/#maemo radic_ (~radic@dslb-178-002-208-007.pools.arcor-ip.net) |
| 03:14.07 | Estel_ | ?! |
| 03:14.09 | Sc0rpius | I have to look why a $variableendingin0 won't work |
| 03:14.17 | Sc0rpius | but it just don' |
| 03:14.19 | Sc0rpius | dont |
| 03:14.22 | Estel_ | btw swap0 was translated properly only 1st time, 2nd time failed |
| 03:14.45 | Estel_ | look, on first place it replaced it with /dev/mmcblk1p2 |
| 03:14.47 | Sc0rpius | oh |
| 03:14.51 | Sc0rpius | then just put a g at the end |
| 03:14.52 | Estel_ | on second apperance it haven't |
| 03:15.00 | Estel_ | hm? |
| 03:15.08 | Sc0rpius | sed "s@/sbin/swapon \-a || echo \"Failed to enable paging partition.\"@blkid \-g\nblkid \| grep $swap0.*TYPE=\\\\\"swap\\\\\" \&\& /sbin/swapon $swap3 \|\| /sbin/swapon $swap2@g" |
| 03:15.12 | Sc0rpius | see the g at the very end? |
| 03:15.18 | Estel_ | yea |
| 03:15.29 | Estel_ | what does it matter? haven't found it in docs |
| 03:15.34 | Sc0rpius | that will make process the line several times |
| 03:15.40 | Sc0rpius | it does!! |
| 03:15.42 | Estel_ | oh |
| 03:15.58 | Estel_ | I used wrong wording |
| 03:16.01 | Estel_ | I mean't |
| 03:16.02 | Sc0rpius | so that's why swap0 wasn't working the second time. |
| 03:16.09 | Estel_ | "what does it means" |
| 03:16.25 | Estel_ | s/means/mean |
| 03:16.32 | Estel_ | s/means/mean/ |
| 03:16.37 | Estel_ | of, whatever ;) |
| 03:16.38 | beford | g means global |
| 03:16.41 | Estel_ | ok, I'll try... |
| 03:17.20 | Sc0rpius | yeah it means "Global replacement" |
| 03:17.30 | Sc0rpius | without it, it'll only replace the first occurrence of everything that matches |
| 03:17.47 | Sc0rpius | http://www.grymoire.com/Unix/Sed.html#uh-6 |
| 03:18.11 | Sc0rpius | now it works 100% ok :) (I just tested it) |
| 03:19.27 | Estel_ | almost there... it's just that now scrpt never ends |
| 03:19.30 | Estel_ | script* |
| 03:19.55 | Estel_ | adjust-rcS-late, upon calling, is processing infinitely |
| 03:20.12 | Sc0rpius | well I'm not running your script just the sed line over the file |
| 03:20.25 | Estel_ | Yea, suspected that |
| 03:20.28 | Estel_ | somehow adding g |
| 03:20.45 | Estel_ | made it run forever (and after killing, original file content isn't changed) |
| 03:20.54 | Estel_ | any idea how to make it terminate properly? |
| 03:21.25 | Estel_ | false alarm, I'm just idiot |
| 03:21.32 | Estel_ | (frankly, just tired) |
| 03:21.41 | Estel_ | copied it without specifying file etc |
| 03:21.43 | Estel_ | fixing |
| 03:21.51 | Sc0rpius | anyway IO'm wondering why you use -i |
| 03:21.53 | Sc0rpius | I'm |
| 03:22.06 | Sc0rpius | oh to replace the file |
| 03:22.11 | Sc0rpius | that's a dangerous option |
| 03:22.18 | beford | inplace edit yea |
| 03:22.22 | Sc0rpius | yeah |
| 03:22.31 | beford | well editing the file is dangerous |
| 03:22.36 | beford | :P |
| 03:23.37 | *** join/#maemo radic (~radic@dslb-178-002-208-007.pools.arcor-ip.net) |
| 03:23.59 | Estel_ | yea! |
| 03:24.08 | Sc0rpius | now tell me why are you doing all this in the first place |
| 03:24.29 | Estel_ | just required micro fix for ammount of spaces and it works great! |
| 03:24.40 | Estel_ | thanks a lot Sc0rpius, You're awesome, You know? |
| 03:24.46 | Estel_ | and I agree sed is great |
| 03:24.51 | Sc0rpius | haha not really but I've been working with sed for a long time |
| 03:24.54 | Estel_ | ~apologise sed |
| 03:24.54 | Sc0rpius | and awk too |
| 03:25.00 | Sc0rpius | and sed+awk is a very powerful combination |
| 03:25.04 | Estel_ | as for why I need it |
| 03:25.12 | Estel_ | yea, but sometimes tricky |
| 03:25.22 | beford | I prefer perl <3 |
| 03:25.27 | Sc0rpius | are you Piotr? |
| 03:25.30 | Estel_ | I'm preparing package for repos, which contain... well, let me paste my description: |
| 03:25.32 | Estel_ | yes :) |
| 03:25.38 | Sc0rpius | oh so you're running for the council |
| 03:25.42 | Estel_ | yea |
| 03:25.58 | Sc0rpius | the results will be the day after tomorrow I guess |
| 03:26.22 | Sc0rpius | I should go back to my Whatsapp client for N900 |
| 03:26.34 | beford | the java based? |
| 03:26.38 | Sc0rpius | no I'm making my own |
| 03:26.40 | Sc0rpius | Qt based |
| 03:26.53 | Sc0rpius | the project is fairly advanced |
| 03:26.59 | *** join/#maemo KrayonWork (~krayon@pdpc/supporter/28for7/krayon) |
| 03:27.04 | Sc0rpius | but still not ready for people use |
| 03:27.04 | Estel_ | hm, nice |
| 03:27.14 | Estel_ | it sounds like quite huge task |
| 03:27.25 | Estel_ | Sc0rpius, here is description of what I'm cooking |
| 03:27.26 | Estel_ | http://sebsauvage.net/paste/?a024cb4a7357d82d#59rshwfdfjqUzPpYIwwfwG3MdeAsADMcBwOJD/Xamb0= |
| 03:27.28 | Sc0rpius | nope, it's actually pretty easy |
| 03:27.32 | Sc0rpius | the GUI is what makes me waste more time |
| 03:27.37 | Sc0rpius | clicks |
| 03:27.42 | Estel_ | (not passed through text editor yet, may contain typos or nasty grammar) |
| 03:28.23 | Estel_ | I though whatsapp is closed source so no way for proper port other than running java midlets |
| 03:28.25 | Sc0rpius | hmm so it disables and enables swap when it detects fragmentation |
| 03:28.31 | Sc0rpius | yeah it's closed source |
| 03:28.40 | Sc0rpius | you can always reverse it |
| 03:28.57 | Estel_ | + sets user defined swap to be enabled on boot or backup swap if first fail |
| 03:29.06 | Sc0rpius | that's what Wazzap did |
| 03:29.09 | Sc0rpius | and that's what I did too |
| 03:29.23 | Estel_ | +, I'll add in a second 3th sed line (forget it) to save stats for counter |
| 03:29.32 | Sc0rpius | everything started when the guy that made the Java port said |
| 03:29.33 | Estel_ | Sc0rpius, lol, nice |
| 03:29.44 | Estel_ | ? |
| 03:29.46 | Sc0rpius | "Java versions for S40 devices are not obfuscated" |
| 03:29.50 | Sc0rpius | and everybody went to decompile those versions |
| 03:29.50 | Estel_ | haha |
| 03:30.13 | Sc0rpius | everybody tried before with the Android versions, that are extremely obfuscated, and pretty hard to reverse because of that |
| 03:30.27 | Sc0rpius | nobody ever thought the S40 versions were totally plain with no protection at all |
| 03:31.19 | Estel_ | ah thats why sudden of nothing 7575 threads about whatsapp appeared |
| 03:31.23 | Estel_ | on tmo... |
| 03:31.24 | Sc0rpius | yeah |
| 03:31.41 | Sc0rpius | and I'm sure I'm not the only making another one to add Wazzap a little pressure hehe |
| 03:32.07 | beford | webos needs a client too |
| 03:32.13 | Sc0rpius | who uses that? |
| 03:32.31 | beford | webos users ? |
| 03:32.31 | Estel_ | I must admit I missed it as I was never interested in this program - but You're definitely goind to make many people happy. |
| 03:32.34 | beford | :P |
| 03:32.49 | Sc0rpius | I ported an app from Webos to Maemo |
| 03:32.58 | Sc0rpius | SplashID, because I really needed it |
| 03:33.40 | Estel_ | searchs for it on packages interface |
| 03:33.46 | Sc0rpius | heh it's not there |
| 03:33.51 | Estel_ | btw, I need to add 3th line to sed: |
| 03:33.52 | Estel_ | /usr/bin/iostat -md mmcblk1p2 | grep mmcblk1p2 | awk '{print $6}' >/root/reswap.stat |
| 03:33.53 | Sc0rpius | since that's pretty illegal I never submit it |
| 03:33.58 | Estel_ | I hope I'll manage to do it now |
| 03:34.01 | Estel_ | without stucking |
| 03:34.11 | Estel_ | surely need to escape -md |
| 03:34.20 | Estel_ | pipes |
| 03:34.20 | Sc0rpius | no |
| 03:34.23 | Estel_ | ? |
| 03:34.31 | Sc0rpius | but you need to space \$ and the \' |
| 03:34.44 | Sc0rpius | and maybe the \| |
| 03:34.49 | Sc0rpius | I would do it just in case |
| 03:35.04 | Sc0rpius | s/space/scape |
| 03:35.11 | Sc0rpius | escape actually |
| 03:35.35 | Estel_ | ok, proceeding |
| 03:59.30 | Estel_ | Sc0rpius, little question, if You don't mind |
| 03:59.52 | Estel_ | is there a way to make sed find text matching pattern (wildcard) and replace it? |
| 04:00.35 | Estel_ | for example, I would like him to find mmcblk*p* (mmcblk0-9p0-9) and replace it with fixed text |
| 04:00.43 | Estel_ | wildcards are an option? |
| 04:00.59 | Sc0rpius | yeah sure |
| 04:01.04 | Estel_ | s/mmcblk*p*/mmcblk1p2/ for example |
| 04:01.12 | Sc0rpius | that would be: |
| 04:01.15 | Estel_ | not need for any special escaping, marking etc? ;) |
| 04:01.23 | Sc0rpius | s/mmcblk.*p.*/mmcblk1p2/ |
| 04:01.28 | Estel_ | ah |
| 04:01.30 | Estel_ | .* |
| 04:01.34 | Estel_ | dot asterisk |
| 04:01.38 | Sc0rpius | or: |
| 04:01.49 | Sc0rpius | s/mmcblk[0-9]+p[0-9]+/mmcblk1p2/ |
| 04:02.00 | Sc0rpius | [0-9]+: at least one digit (it could be several) |
| 04:02.11 | Sc0rpius | [0-9]*: none, or several digits |
| 04:02.14 | Estel_ | thanks the latter is even better |
| 04:02.28 | Estel_ | I doubt someone got more than 10 partitions, but still |
| 04:03.03 | Estel_ | and .*: jus 1 digit? |
| 04:03.15 | Estel_ | or at least 1? |
| 04:03.50 | Sc0rpius | * 0 or more matches of the previous regexp |
| 04:03.56 | Sc0rpius | + 1 or more matches of the previous regexp |
| 04:03.59 | Sc0rpius | . = any char |
| 04:04.00 | Sc0rpius | so: |
| 04:04.08 | Sc0rpius | .+ = one character or more |
| 04:04.17 | Sc0rpius | .* = nothing or anything hehe (sounds weird) |
| 04:04.24 | Estel_ | :) |
| 04:04.31 | Sc0rpius | a.*b would match ab, a1b, aaskdjfhakjb, etc. |
| 04:04.40 | Sc0rpius | a.+b would only match a1b, assdfsdfb |
| 04:04.46 | Sc0rpius | but no ab. |
| 04:04.51 | Estel_ | and [0-9] is to limit it for digits |
| 04:05.00 | Estel_ | instead of all alphanumeric |
| 04:05.16 | Sc0rpius | [0-9] one single digit from 0 to 9 |
| 04:05.20 | Estel_ | I got it. |
| 04:05.22 | Sc0rpius | [0-9]+ several digits |
| 04:05.56 | Estel_ | [0-9]*nothing or any number of digits |
| 04:06.06 | Estel_ | thank a lot, You got talent to explain things, surely. |
| 04:06.08 | Sc0rpius | exactly, you got it |
| 04:06.21 | Estel_ | sorry for bothering You and taking out of developing ;) |
| 04:06.43 | Sc0rpius | it's ok, it's too hot for me to code tonight |
| 04:06.50 | Sc0rpius | 27C |
| 04:07.00 | Sc0rpius | and no A/C in this room, only in the bedroom where TV is |
| 04:07.03 | Sc0rpius | so TV is calling hehe |
| 04:09.10 | Estel_ | :) I got 28 too but only during day |
| 04:09.20 | Estel_ | 29 today expected |
| 04:09.49 | Estel_ | but now it's quite pleasant morning (6:09 AM) |
| 04:11.40 | Sc0rpius | it's 11:41pm here, during the day it reaches 36C is crazy |
| 04:13.01 | Estel_ | where it is, where do You live? |
| 04:13.26 | Estel_ | btw, last question here - any way to make sed into replacing all occurenced of pattern |
| 04:13.31 | Estel_ | not only first found? |
| 04:13.56 | Estel_ | (I'm sure there is, and I promise to read whole manual tommorow, too tired to do it right now :P) |
| 04:14.46 | Sc0rpius | Caracas, Venezuela |
| 04:14.59 | Sc0rpius | g at the end will replace all occurrences |
| 04:15.05 | Estel_ | ah, so temperatures are justified. |
| 04:15.09 | Sc0rpius | sed manual is pretty long |
| 04:15.19 | Estel_ | thats why I'm asking now |
| 04:15.29 | Estel_ | btw I'm on "far north", Poland |
| 04:15.39 | Sc0rpius | that's far |
| 04:15.41 | Sc0rpius | :) |
| 04:15.41 | Estel_ | but it's just a little cooler ;) |
| 04:16.11 | Estel_ | hm, so g replaced all occurences... why it helped us with $swap0/$swap2? |
| 04:16.24 | Estel_ | first pattern was replaced @ first run |
| 04:16.35 | Estel_ | so any another run shouldn't alter it |
| 04:17.54 | Sc0rpius | it's weird |
| 04:18.00 | Sc0rpius | but it worked nonetheless |
| 04:18.12 | Estel_ | yea :) |
| 04:24.33 | *** join/#maemo Openfree` (~Openfreer@116.228.88.131) |
| 04:27.16 | *** join/#maemo Termana (Termana@199.127.226.8) |
| 04:35.21 | Jaded | <3 |
| 04:59.24 | *** join/#maemo gexc (~ircchatte@124.160.216.122) |
| 05:04.35 | *** join/#maemo e-yes (~e-yes@213.5.78.147) |
| 05:04.52 | *** join/#maemo LaoLang_cool (~LaoLang_c@221.226.175.139) |
| 05:12.50 | Estel_ | ...and here is how file should look after operation: |
| 05:12.52 | Estel_ | http://sebsauvage.net/paste/?c15cb8bf247c7a39#1QwS15G45PHlF8fuxzSc2alQoQIitGcBWO3UZUuw8s4= |
| 05:13.16 | Estel_ | (just numbers modified on 5 place, normally script will take new values from config) |
| 05:13.37 | Estel_ | Sc0rpius, if You could look at it after returning, I'll be very grateful. |
| 05:14.36 | Sc0rpius | I'm here |
| 05:14.40 | Sc0rpius | I was whining at #mer |
| 05:14.58 | Estel_ | oh :) |
| 05:14.59 | Sc0rpius | I think I miss the problem? |
| 05:15.18 | Estel_ | ok, I'll re-paste my monologue ;) |
| 05:15.39 | Estel_ | Sc0rpius, could You help me with one last thing? |
| 05:15.46 | Estel_ | I though I'll manage to do it myself, but still failing |
| 05:16.03 | Estel_ | beside adjust-rcS-late.sh, I'll also include update-rcS-late.sh |
| 05:16.07 | Sc0rpius | ok |
| 05:16.09 | Estel_ | the latter is almost identical script, that take already modified rcS-late |
| 05:16.37 | Estel_ | and update locations swaps there |
| 05:16.44 | Estel_ | (in case user change swap layout and update config, update-rcS-late.sh will update it for user safely) |
| 05:16.50 | Estel_ | <PROTECTED> |
| 05:16.56 | Estel_ | on "old" content side using wildcard mmcblk[0-9]+p[0-9]+ |
| 05:17.03 | Estel_ | <PROTECTED> |
| 05:17.18 | Sc0rpius | ok |
| 05:17.28 | Estel_ | yet, resulting modified file is totally screwed up |
| 05:17.33 | Estel_ | whole rcS-late is filled with patterns ;) |
| 05:17.36 | Sc0rpius | what's your script this time? |
| 05:17.39 | Estel_ | I've also triedd to update 5 occurences in 5 steps... |
| 05:17.44 | Estel_ | but results vere similar |
| 05:17.50 | Estel_ | Sc0rpius, here is my 2nd script (modified to not load external config): |
| 05:18.02 | Estel_ | <PROTECTED> |
| 05:18.12 | Estel_ | <PROTECTED> |
| 05:18.20 | Estel_ | http://sebsauvage.net/paste/?f2348cacc4e4fc8f#jhkbnYBZKiWYdgi6tJ60jB3guPDqxybWbfK6QwbnrWM= |
| 05:18.31 | Estel_ | ...and here is how file should look after operation: |
| 05:18.37 | Estel_ | http://sebsauvage.net/paste/?c15cb8bf247c7a39#1QwS15G45PHlF8fuxzSc2alQoQIitGcBWO3UZUuw8s4= |
| 05:18.44 | Estel_ | (just numbers modified on 5 place, normally script will take new values from config) |
| 05:18.54 | Estel_ | playback complete ;) |
| 05:19.19 | Sc0rpius | hmm |
| 05:20.22 | Estel_ | after fail of "5 steps" solution, I tried what You see in script now - whole text in one step |
| 05:21.34 | Sc0rpius | and what are you getting with your script? |
| 05:22.03 | *** join/#maemo Vib3 (~Vibe@gateway/tor-sasl/vib3) |
| 05:22.44 | Sc0rpius | 'cos I'm getting a total disaster with it |
| 05:23.50 | Estel_ | same here |
| 05:24.50 | Sc0rpius | mostly because you forgot to escape > |
| 05:25.11 | Sc0rpius | no , it's not that |
| 05:25.14 | Sc0rpius | lemme see what's wrong |
| 05:26.32 | Sc0rpius | ok |
| 05:26.38 | Sc0rpius | try your script without escaping & and | |
| 05:29.00 | Sc0rpius | but that will never work |
| 05:29.03 | Sc0rpius | listen |
| 05:29.06 | Sc0rpius | sed works line by line |
| 05:29.12 | Sc0rpius | you can't match two lines on sed at a time |
| 05:29.33 | Sc0rpius | I can see that you have a \n in the match expression, that will never work |
| 05:29.56 | Sc0rpius | but this script is to "revert" the first script, what I would do is create a .bak file or something instead of doing another script for reverting |
| 05:30.04 | Estel_ | somewhere theyMve written about using 1!H and such things |
| 05:30.06 | Estel_ | no no |
| 05:30.08 | Estel_ | not revert |
| 05:30.25 | Estel_ | just update mmcblk*p* values |
| 05:30.44 | Estel_ | and honestly I've tried line by line approach in many steps |
| 05:30.51 | Sc0rpius | ok |
| 05:30.52 | Estel_ | (5 steps for 5 values to replace) |
| 05:30.58 | Sc0rpius | but you don't need to match the first blkid -g line |
| 05:30.59 | Estel_ | it resulted in same disaster |
| 05:31.04 | *** join/#maemo piggz (~piggz@host-92-18-203-130.as13285.net) |
| 05:31.05 | Estel_ | sure |
| 05:31.11 | Estel_ | just 2nd and 3nd |
| 05:31.18 | Sc0rpius | isn't easier like this: |
| 05:31.19 | Estel_ | should be doable in 2 steps |
| 05:32.12 | Sc0rpius | hmm |
| 05:32.21 | Sc0rpius | the problem is that there are two swaps |
| 05:32.48 | Estel_ | yea. |
| 05:32.57 | *** join/#maemo real-dev (~dev@itc-scholz.de) |
| 05:33.01 | Estel_ | swap0 is 2 times in first line and 2 times in second |
| 05:33.09 | Sc0rpius | but i would definitly do simpler scripts like: |
| 05:33.10 | Estel_ | swap2 is only one time, in first line |
| 05:33.45 | *** join/#maemo sulx (~sulx@85-23-14-250.bb.dnainternet.fi) |
| 05:34.49 | Sc0rpius | this will be funny but: |
| 05:35.06 | Sc0rpius | sed s/mmcblk.p.[^$]/$swap0/g |
| 05:35.08 | Sc0rpius | and then: |
| 05:35.17 | Sc0rpius | sed s/mmcbkl.p.$/$swap1/ |
| 05:35.19 | Sc0rpius | and done. |
| 05:35.44 | Sc0rpius | I would summarize your really big script with just those 2 lines. |
| 05:36.00 | Estel_ | would be wonderful, but |
| 05:36.15 | Estel_ | wouldn't it in step 2nd replace thing from step 1nd? |
| 05:36.25 | Estel_ | resulting in swap2 everywhere? |
| 05:36.34 | Sc0rpius | no the first one will replace any mmcblk that is not at the end of a line with swap0 |
| 05:36.48 | Sc0rpius | and the second line will replace only mmcblk that are at the end of a line with swap1 (or 2 or whatever) |
| 05:37.25 | Estel_ | kk, trying |
| 05:37.26 | Sc0rpius | if that scares you, you can change it to: |
| 05:37.44 | Sc0rpius | sed s/mmcblk.p.*||/$swap0/g <-- all mmblk that are behind a || |
| 05:37.56 | Sc0rpius | sed s/||.*mmcbkl.p.$/$swap2/ <-- all mmblk that are after a || |
| 05:38.05 | Estel_ | no, why scarry :) just need to check |
| 05:38.09 | Estel_ | I see |
| 05:38.15 | Sc0rpius | and actually I can summarize the first script to something very simple too |
| 05:39.25 | Sc0rpius | if you think somebody has more than 9 partitions use [0-9]+ instead of . |
| 05:43.49 | *** join/#maemo jacekowski (jacekowski@jacekowski.org) |
| 05:47.07 | *** join/#maemo Corsac (~yap@molly.corsac.net) |
| 05:51.23 | Estel_ | Sc0rpius, little problem |
| 05:51.33 | Sc0rpius | ? |
| 05:51.34 | Estel_ | on 1st occurence, it also replaces a dot |
| 05:51.57 | Sc0rpius | what dot? |
| 05:52.07 | Estel_ | blkid | grep /dev/mmcblk7p3.*TYPE=\"swap\" |
| 05:52.09 | Estel_ | becomes |
| 05:52.17 | Estel_ | blkid | grep /dev/mmcblk1p2*TYPE=\"swap\" |
| 05:52.33 | Estel_ | (missing dot before *TYPE) |
| 05:52.38 | Sc0rpius | I see |
| 05:52.46 | Estel_ | i wanted to fix it, but |
| 05:52.56 | Estel_ | it breaks other occurences ;) |
| 05:53.29 | Estel_ | I'm using 1st version You proposed |
| 05:53.44 | Estel_ | sed -i s@mmcblk.p.[^$]@$swap0@g /home/user/original-rcS-late |
| 05:53.52 | *** join/#maemo Veggen (~vegard@vegard.engen.priv.no) |
| 05:55.29 | Sc0rpius | yeah lemme think |
| 05:55.31 | Sc0rpius | I know why |
| 05:56.20 | Estel_ | also there is missing space after 2nd occurence |
| 05:56.43 | Estel_ | && /sbin/swapon /dev/mmcblk7p3 || |
| 05:56.51 | Estel_ | && /sbin/swapon /dev/mmcblk1p2|| |
| 05:56.57 | Estel_ | (space before pipes) |
| 05:57.35 | Sc0rpius | sed "s/mmcblk.p.\([^$]\)/$swap0\1/g" file |
| 05:57.41 | Sc0rpius | and for the second one: |
| 05:57.53 | Estel_ | same for 2nd line: |
| 05:57.54 | Estel_ | /usr/bin/iostat -md mmcblk1p2| grep mmcblk1p2| awk |
| 05:58.03 | Estel_ | /usr/bin/iostat -md mmcblk1p2 | grep mmcblk1p2 | awk |
| 05:58.06 | Sc0rpius | yeah it's fixed with: |
| 05:58.07 | Sc0rpius | sed "s/mmcblk.p.\([^$]\)/$swap0\1/g" file |
| 05:58.10 | Estel_ | (should be with space |
| 05:58.12 | Estel_ | ok |
| 05:59.52 | Sc0rpius | the second one works fine: |
| 06:00.08 | Sc0rpius | sed "s/mmcblk.p.$/$swap2/" file |
| 06:04.14 | Macer | synology uses cgi |
| 06:04.19 | Estel_ | thanks a lot, works flawlessly under all conditions |
| 06:04.33 | Estel_ | You've made it so simple Sc0rpius :) |
| 06:04.52 | Estel_ | I see that with such thing expertise gained due to experience matters really, really very much |
| 06:05.20 | Estel_ | I've been using loong scripts just hoping to get it working, and Yours 6x shorten works ideally :) |
| 06:07.19 | Estel_ | Sc0rpius, what is Your tmo link? |
| 06:07.29 | Estel_ | s/link/nick/ |
| 06:07.58 | Estel_ | want to give proper credits in script comment and package description :) |
| 06:11.21 | Sc0rpius | tmo link? |
| 06:11.25 | Estel_ | nick |
| 06:11.26 | Sc0rpius | tmo nick hmm |
| 06:11.59 | Sc0rpius | it's Scorpius |
| 06:12.05 | Estel_ | ;) thanks |
| 06:12.11 | Sc0rpius | I was checking if it was with an o or with a zero |
| 06:12.13 | Sc0rpius | (I forgot) |
| 06:12.21 | Estel_ | understood |
| 06:13.02 | *** join/#maemo sirdancealot4 (~sirdancea@98.82.broadband5.iol.cz) |
| 06:15.26 | *** join/#maemo sq-one (~sq-one@p549AB42D.dip.t-dialin.net) |
| 06:18.30 | Sc0rpius | Estel do you use Backupmenu right? |
| 06:18.34 | Sc0rpius | 'cos I think you post in that thread |
| 06:18.38 | Estel_ | yes |
| 06:18.46 | Sc0rpius | do you use it with multiboot (default) or with U-Boot? |
| 06:19.01 | Estel_ | in fact I use backupmenu-multiboot variant, manually updated to latest verion |
| 06:19.08 | Estel_ | s/verion/version/ |
| 06:19.31 | Sc0rpius | I would really like to stop using multiboot and use U-Boot since everything works with U-Boot (Nemo, Nitdroid, etc) but I love my Backupmenu |
| 06:19.49 | Estel_ | I don't use U-Boot yet, I'm still not sure if it's not posing regressions. Probably will switch when thumb2 arrives |
| 06:20.04 | Estel_ | backupmenu can be used with U-boot for 100% |
| 06:20.13 | Sc0rpius | that's what I've heard |
| 06:20.15 | Estel_ | I remember someone asking it it U-boot thread |
| 06:20.16 | Estel_ | ye |
| 06:20.27 | Estel_ | s/ye/yea/ |
| 06:20.36 | Estel_ | although I don't have any details :( |
| 06:20.39 | Sc0rpius | some guy uploaded some files to make it work but the link expired |
| 06:20.48 | Estel_ | hm |
| 06:27.49 | Sc0rpius | anyway the first thing I need is a microSD and I don't have one |
| 06:27.59 | Sc0rpius | after that I'll think about U-Boot + Backupmenu |
| 06:28.42 | *** join/#maemo MacDrunk (~marper@201.164.188.60) |
| 06:30.41 | Estel_ | hm, why not using eMMC for this? |
| 06:32.45 | Sc0rpius | the thing is that I want to test Mer/Nemo |
| 06:32.49 | Sc0rpius | but I need a microSD card for that |
| 06:40.45 | *** join/#maemo robink_ (~quassel@fatcat.creosotehill.org) |
| 06:43.13 | Estel_ | I see. Sure thing |
| 06:43.23 | Estel_ | but sd cards should be cheap |
| 06:43.29 | Estel_ | be sure to buy class 4 one |
| 06:43.35 | Estel_ | prefferably genuine sandisk 8GB |
| 06:43.46 | Estel_ | most performance, better than class 6 or 10 |
| 06:44.27 | *** join/#maemo zap_ (~zap@178.130.21.28) |
| 06:46.45 | Macer | heh |
| 06:47.46 | Estel_ | ufff, ereswap finished |
| 06:48.02 | Estel_ | I took it as first project to upload to extras as I though it'll be faster |
| 06:48.19 | Estel_ | but during preparing ideas for make it more conveinent for users came... |
| 06:48.29 | Estel_ | and it turned out to be hardest and most complex |
| 06:48.46 | Estel_ | not it's like backend for a swap management utility |
| 06:49.17 | Estel_ | can be used from terminal, via desktop shortcuts (obviously), queen-beecon-widgets, shortcutd etc... |
| 06:49.31 | Estel_ | and writing gui for it should be trivial for anyone experienced |
| 06:50.04 | *** part/#maemo MacDrunk (~marper@201.164.188.60) |
| 06:50.17 | Estel_ | whole code is rather simple and commented very verbosely, so it should be quite good for other people to learn few tricks I've scavenged from pros (and small, very small fraction of my inventions) |
| 06:50.35 | Estel_ | only thing it's lacking now is enabling ramzswap (on demand) |
| 06:50.56 | *** join/#maemo rcg1 (~rc@84.122.33.18.dyn.user.ono.com) |
| 06:50.56 | *** join/#maemo murrayc (~murrayc@ppp-188-174-79-167.dynamic.mnet-online.de) |
| 06:51.11 | Estel_ | I hope You people will enjoy it ;) later I'll upload other, more simple yet useful |
| 06:51.14 | Estel_ | things |
| 06:51.16 | Estel_ | see ya! |
| 06:51.46 | *** join/#maemo robink (~quassel@unaffilated/robink) |
| 06:58.20 | *** join/#maemo LaoLang_coo_ (~LaoLang_c@221.226.175.139) |
| 07:07.46 | Psi | would anyone commend a web based file manager i can run on the n900 so i can grab files from other pcs on the lan without having to take the phone out of my pocket? |
| 07:07.52 | Psi | commend=recommend |
| 07:08.13 | *** join/#maemo calvaris (~calvaris@fanzine.igalia.com) |
| 07:08.19 | *** join/#maemo harbaum (~quassel@2001:8d8:1fe:8:e89d:1b76:f0bc:d451) |
| 07:08.53 | *** part/#maemo harbaum (~quassel@2001:8d8:1fe:8:e89d:1b76:f0bc:d451) |
| 07:09.37 | *** join/#maemo calvaris (~calvaris@fanzine.igalia.com) |
| 07:14.13 | *** join/#maemo hurbu (~hurbanza@81-174-24-106.dynamic.ngi.it) |
| 07:15.57 | *** join/#maemo florian (~fuchs@port-217-146-132-69.static.qsc.de) |
| 07:15.57 | *** join/#maemo florian (~fuchs@Maemo/community/contributor/florian) |
| 07:21.44 | Sicelo | Psi: what about plain old sftp |
| 07:22.25 | Estel_ | merlin1991, ping |
| 07:23.27 | Estel_ | merlin1991, I've finished my work on ereswap, although got predictable problems with builder |
| 07:23.44 | Psi | Sicelo: need a client |
| 07:23.46 | Estel_ | I suspect it's /debian/rules fault, so here it is: |
| 07:23.56 | Psi | i want something that works without me having to install anything on their pc |
| 07:25.11 | Estel_ | http://sebsauvage.net/paste/?416a9573dc5751c6#6HvCkkZUEujhPy5GmJvy48ZIhCMvciQCHMZLhNKsSCU= |
| 07:25.31 | Estel_ | summary log from builder just says "failed" without providing any hints |
| 07:25.43 | Estel_ | detail logs is here, although, also not helpful: |
| 07:26.54 | Sicelo | Psi: hmm, ftp server on your N900 then. any pc has an ftp client. |
| 07:26.57 | *** join/#maemo jargon- (~dayo@unaffiliated/jargon-) |
| 07:27.54 | Estel_ | http://sebsauvage.net/paste/?c6f081284e324b62#gVlGl5GHa22wirEpW7zHROJXdTYkviFzP4msAopXzlA= |
| 07:29.02 | Estel_ | here is my ereswap_1.0.dsc: |
| 07:29.08 | Estel_ | http://sebsauvage.net/paste/?1e3a45f2cf7e1f8a#nMHsqM2WVNS2UajQk2/HgS3gkhnjh5w+5jW7MgpOmu8= |
| 07:29.37 | *** join/#maemo sasquatch (~username@p57958213.dip.t-dialin.net) |
| 07:29.52 | Estel_ | ...and here is source package: |
| 07:29.53 | Estel_ | https://garage.maemo.org/builder/fremantle/ereswap_1.0/sources/ereswap_1.0.tar.gz |
| 07:30.27 | Estel_ | merlin1991, if You could look at it, I would be thankful. No idea what could be wrong besides rules (yet, I *think* I followed Your suggestions) |
| 07:30.34 | Estel_ | thanks in advance! |
| 07:30.44 | *** join/#maemo Dibblah (~Dibblah@host86-137-245-98.range86-137.btcentralplus.com) |
| 07:32.05 | *** join/#maemo Saviq_ (~Saviq@84-10-219-118.dynamic.chello.pl) |
| 07:35.18 | Psi | Sicelo: you mean browser as ftp client? |
| 07:38.46 | Sicelo | iirc all versions of windows have ftp.exe (cmd line..) which will allow you to upload to your N900 as well. |
| 07:39.24 | Sicelo | anyway, it was just a suggestion.. there might be a 'web' method that would fit your needs better |
| 07:43.13 | *** join/#maemo jonne|reconnecte (~jonne@91.182.21.191) |
| 07:45.33 | *** join/#maemo ludens (~ludens@93.158.64.201) |
| 07:49.00 | *** join/#maemo jhb (~joerg@e176083174.adsl.alicedsl.de) |
| 07:54.00 | *** join/#maemo croppa (~stuart@CPE-120-146-137-99.static.nsw.bigpond.net.au) |
| 07:55.55 | *** join/#maemo Jade (~jade@Jade.broker.freenet6.net) |
| 07:55.55 | *** join/#maemo Jade (~jade@unaffiliated/jade) |
| 07:56.06 | *** join/#maemo drussell (~dave@cpc1-brom10-2-0-cust341.16-1.cable.virginmedia.com) |
| 07:57.14 | Psi | Sicelo: commandline ftp is awful |
| 07:57.42 | Psi | or it is for what i want |
| 07:59.07 | *** join/#maemo lukasz_gut (Lukasz@nat/nokia/x-rpqcwcgiotnlkqan) |
| 08:01.58 | *** join/#maemo tank-man (1000@S010600121729c6a1.vc.shawcable.net) |
| 08:05.15 | *** join/#maemo geaaru (~geaaru@host170-152-static.43-88-b.business.telecomitalia.it) |
| 08:05.40 | *** join/#maemo schen (~schen@507080E4.static.ziggozakelijk.nl) |
| 08:06.24 | joga | Psi you want to grab files to n900 from other computers, *without* touching the phone? |
| 08:07.36 | Psi | correct |
| 08:08.07 | Psi | want to walk into places that i already have wifi setup and be able to upload/download files to my phone while its still in my pocket~ |
| 08:08.17 | Psi | be nice if i could also view text files |
| 08:09.54 | *** join/#maemo mk8 (~torello@ip-212-141.sn1.eutelia.it) |
| 08:11.44 | joga | I dunno...I always use ssh for such |
| 08:11.49 | *** join/#maemo M4rtinK (~M4rtinK@mail.melf.eu) |
| 08:13.26 | *** join/#maemo arno0ob (~arno0ob@nor75-32-78-237-172-37.fbx.proxad.net) |
| 08:13.27 | Psi | yeah, but then i need to install putty |
| 08:20.21 | *** join/#maemo dafox (~dafox@dyn-194208.nbw.tue.nl) |
| 08:22.57 | *** join/#maemo robink_ (~quassel@fatcat.creosotehill.org) |
| 08:23.37 | *** join/#maemo mhlavink (quassel@nat/redhat/x-lqqkpmbaovroilmu) |
| 08:27.07 | Sicelo | Psi: another option is samba |
| 08:27.38 | Psi | yeah, i have that, bit its a bit of a cpu hog |
| 08:27.44 | Psi | *but |
| 08:28.09 | Sc0rpius | what about OpenSSH server and you just SFTP to the phone from PCs? |
| 08:28.10 | Sc0rpius | that's what I do. |
| 08:28.21 | Sicelo | he's already ruled that one out |
| 08:28.33 | petteri | rsync with /etc/network/if-up rule |
| 08:28.50 | Sc0rpius | oh he wants it web based? |
| 08:28.52 | *** join/#maemo inz (inz@inz.fi) |
| 08:29.00 | petteri | with N9 you can do it easiely with profilematic |
| 08:29.23 | Sicelo | Psi: why are you doing this..? i mean, why you can't whip your phone out of the pocket for the file upload/download? |
| 08:31.51 | Psi | lazy |
| 08:32.47 | *** join/#maemo doc|home (~doc@gentoo/contributor/doc-007) |
| 08:33.05 | Sicelo | doesn't believe that .. anyway |
| 08:33.18 | chem|st | putty and winscp do not need an install |
| 08:33.40 | chem|st | o/ |
| 08:33.40 | Sicelo | so, you get to this place, your N900 auto-connects, how do you find out what IP address N900 was assigned? |
| 08:33.56 | Psi | chem|st: you still need to go download them |
| 08:34.01 | Psi | or grab them somehow |
| 08:34.23 | chem|st | Sicelo: simple broadcast |
| 08:34.32 | Psi | Sicelo: i setup a mac static on the wifi |
| 08:34.38 | Psi | or that |
| 08:35.06 | Sicelo | if you do all that, i don't see how/why ftp is a no-go |
| 08:35.31 | Psi | ftp is more a file download/upload app, i want a full file manager |
| 08:35.36 | Psi | with copy/move etc |
| 08:35.37 | chem|st | Psi: some liek kies air? |
| 08:36.09 | Psi | ive used Ajaxplorer but i only got it installed inside debian chroot, so i would still need to load that on the phone first |
| 08:36.45 | chem|st | Psi: start stop services depending on the network you are in |
| 08:36.54 | Psi | yeah, could do i guess |
| 08:37.25 | *** join/#maemo mortenvp (~mortenvp@192.38.55.27.natpool.es.aau.dk) |
| 08:37.26 | *** join/#maemo aloril (~aloril@dsl-tkubrasgw3-fe7ef900-153.dhcp.inet.fi) |
| 08:38.13 | *** join/#maemo eMHa (~mh@et-0-30.gw-nat.bs.kae.de.oneandone.net) |
| 08:38.16 | *** join/#maemo msanchez (~msanchez@47.17.60.213.dynamic.mundo-r.com) |
| 08:41.28 | *** join/#maemo mirsal_ (~user@videolan/developer/Mirsal) |
| 08:42.10 | *** join/#maemo mirsal_ (~user@videolan/developer/Mirsal) |
| 08:42.19 | *** join/#maemo rcg1 (~rc@84.122.33.18.dyn.user.ono.com) |
| 08:44.23 | Estel_ | ** WinSys ** Client: XChat-WDK 1507 (x86) ** OS: Microsoft Windows XP Professional ** CPU: Procesor Intel Pentium III Xeon (2,00 GHz) ** RAM: 3581 MB Total (2725 MB Free) ** VGA: NVIDIA GeForce 8600M GT ** Uptime: 50,03 Hours ** |
| 08:45.56 | jargon- | anybody have this problem where media files somehow corrupt each other? some of my music and video files seem to partially overwrite some of my podcast files |
| 08:46.11 | Estel_ | fckd'ed up vfat filesystem? |
| 08:46.26 | jargon- | deleting the podcast file and redownloading, doesn't seem to help. file remains corrupted |
| 08:46.35 | jargon- | run fsck? |
| 08:46.42 | Estel_ | yeo, but unmount first of course |
| 08:46.57 | jargon- | ok |
| 08:46.59 | Estel_ | prefferable, fsck.vfat /dev/mmcblk1p1 -r -v |
| 08:47.01 | *** join/#maemo Pali (~pali@unaffiliated/pali) |
| 08:47.17 | Estel_ | if that doesn't help, copy all remaining good things, and re-format vfat (re create) |
| 08:47.21 | Estel_ | then copy back |
| 08:47.30 | Estel_ | if *that* doesn't help, i have NFC |
| 08:48.32 | *** join/#maemo ludens (~ludens@93.158.64.201) |
| 08:50.44 | jargon- | hmm. can't mount it as user |
| 08:50.53 | jargon- | and if i mount as root, it's all root-owned |
| 08:55.09 | Psi | yeah, i agree when fat16/32 gets corrupt you get some weird things occuring |
| 08:55.15 | *** join/#maemo vbenes (vbenes@nat/redhat/x-mzwalysxmbwporce) |
| 08:55.41 | jargon- | Psi: Estel_: how do i mount it back as user after fsck? |
| 08:55.59 | Psi | also, you get strange issues when your microsd card is cheap and cant handle the timing the device is trying to use it at |
| 08:56.41 | jargon- | no microsd yet |
| 08:56.53 | Psi | so just the onboard? |
| 08:56.55 | *** join/#maemo mortenvp (~mortenvp@h196.natout.aau.dk) |
| 08:57.33 | *** join/#maemo ludens (~ludens@93.158.64.201) |
| 08:57.42 | jargon- | yeah |
| 08:57.57 | *** join/#maemo SmilyOrg (Smily@BSN-61-107-214.dial-up.dsl.siol.net) |
| 08:58.02 | Psi | strange |
| 09:19.53 | *** join/#maemo jargon- (~dayo@unaffiliated/jargon-) |
| 09:24.19 | Estel_ | jargon, device should be usable if You use proper mount commands |
| 09:24.27 | Estel_ | even if you mount as root |
| 09:24.29 | Estel_ | gimme a sec |
| 09:24.54 | *** join/#maemo Saviq_ (~Saviq@84-10-219-118.dynamic.chello.pl) |
| 09:26.22 | Estel_ | mount -t vfat /dev/mmcblk1p1 /home/user/MyDocs -o noauto,nodev,noexec,nosuid,noatime,nodiratime,utf8,uid=29999,shortname=mixed,dmask=000,fmask=0133,rodir |
| 09:26.31 | Estel_ | that's proper mounting line for MyDocs |
| 09:26.44 | Estel_ | do Yourself a favor and save it as shell script in /usrb/sbin/ |
| 09:26.50 | Estel_ | for example "mydocson.sh" |
| 09:26.56 | Estel_ | BTW, reboot would also help You ;) |
| 09:33.12 | *** join/#maemo calvaris (~calvaris@fanzine.igalia.com) |
| 09:33.35 | *** part/#maemo sulx (~sulx@85-23-14-250.bb.dnainternet.fi) |
| 09:38.16 | *** join/#maemo xev (~xev@unaffiliated/xev) |
| 09:39.52 | *** join/#maemo simh_ (~simh@193.158.222.106) |
| 09:39.58 | *** join/#maemo sunny_s (~sunny_s@86.57.254.135) |
| 09:40.44 | *** join/#maemo MrPingu (~MrPingu@86.92.226.97) |
| 09:43.40 | Estel_ | DocScrutinizer, about charge21.sh done by this guy - you've pointed out nice suggestion there, what about a revision of his code? |
| 09:44.10 | Estel_ | We already know You're one of sh mastahs, so, it would be great to have properly revisioned code. It could be a semi-official update to charge.sh |
| 09:44.25 | Estel_ | BTw, i never remember, which charge was more reccomended - charge.sh or charge21.sh |
| 09:50.22 | *** join/#maemo hurbu (~hurbanza@81-174-50-185.dynamic.ngi.it) |
| 09:51.16 | *** join/#maemo xev (~xev@unaffiliated/xev) |
| 09:55.53 | DocScrutinizer51 | Estel_: already on my todo list |
| 09:58.01 | *** join/#maemo gomiam (~magao@157.88.94.233) |
| 09:58.57 | Estel_ | DocScrutinizer, nice to hear :D |
| 09:59.21 | Estel_ | Well, i'm not councilor (yet?), but I try to faciliate communication and ideas already ;) |
| 09:59.42 | Estel_ | at least it's always easier to know right person to do some thing, than do it yourself, lol... |
| 10:00.04 | Estel_ | seriously though, I haven't sleep yet due to fricking package I'm preparing. with giga help of Sc0rpius, I was able to finish it |
| 10:00.12 | Estel_ | yet now build fail ;) |
| 10:00.42 | Estel_ | considering it doesn't contain any code to compile - just .sh scripts and /debian/* required files - it's quite irritating |
| 10:00.49 | Estel_ | especially after 12 hours of work |
| 10:00.50 | Estel_ | :p |
| 10:00.55 | Estel_ | or more... |
| 10:02.59 | DocScrutinizer51 | re ETB: http://www.email-archive.com/linux-omap@vger.kernel.org/msg17607.html http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ihi0014o/index.html |
| 10:10.17 | *** join/#maemo aloril (~aloril@84.249.126.153) |
| 10:18.38 | merlin1991 | Estel_: your control file is wrong |
| 10:18.58 | Estel_ | I'm all ears. with feets, actually. |
| 10:19.45 | merlin1991 | anything multiline, like descriptions has to have a new line starting with a space, just like with the xb-maemo-icon-26 |
| 10:20.11 | Estel_ | roger that. |
| 10:20.24 | *** join/#maemo Pali (~pali@unaffiliated/pali) |
| 10:20.41 | merlin1991 | also why do you chmod the scripts in postinst? |
| 10:21.53 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 10:26.58 | *** join/#maemo mk8 (~torello@ip-212-141.sn1.eutelia.it) |
| 10:30.05 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 10:31.49 | *** join/#maemo habmala (~sebb@h176n2-k-flo-a13.ias.bredband.telia.com) |
| 10:34.19 | Estel_ | because they'rer not runable otherwise? |
| 10:34.27 | Estel_ | merlin1991 |
| 10:35.04 | merlin1991 | have them with the runable bit set in the tar already |
| 10:37.29 | DocScrutinizer51 | lxr.free-electrons.com/source/arch/arm/kernel/etm.c |
| 10:37.40 | merlin1991 | dafuq? |
| 10:37.54 | freemangordon | merlin1991, thumb2 :P |
| 10:38.01 | DocScrutinizer51 | we got that (or could get that) in KP? |
| 10:38.05 | freemangordon | and ways to trace it |
| 10:38.11 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 10:38.37 | *** join/#maemo t_s_o (~tso@84.48.230.202) |
| 10:39.37 | freemangordon | DocScrutinizer51, I can bet that n900 being HS device will not benefit of that. Just imagine if userspace is allowed to do instruction (or whatever) trace of everything in system. don't believe that i possible. |
| 10:40.02 | DocScrutinizer51 | yup |
| 10:40.30 | DocScrutinizer51 | though, since we don't run secure mose anyway... |
| 10:40.38 | DocScrutinizer51 | mode* |
| 10:40.49 | Estel_ | merlin1991, thanks |
| 10:40.59 | Estel_ | I've just based postinst script on other packages |
| 10:41.05 | Estel_ | afaik even hend does this chmod :P |
| 10:41.10 | Estel_ | will keep in mind that it's not needed |
| 10:41.15 | freemangordon | DocScrutinizer51, otherwise all that HS, TrustZone , etc. talk will be a pile of crap |
| 10:41.16 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-62-10-90-253.clienti.tiscali.it) |
| 10:42.04 | DocScrutinizer51 | isn't it anyway, for fremantle? |
| 10:42.08 | Estel_ | merlin1991, so i already define new lines in description by making it new line + space? |
| 10:42.16 | merlin1991 | yep |
| 10:42.28 | Estel_ | ~roger |
| 10:42.28 | infobot | BZFlag's autopilot, named after "Airplane's" pilot |
| 10:43.31 | freemangordon | DocScrutinizer51, why is that? Once (and if) I have my NFC flex cable I will explore the possibilities for true banking/payment applications on n900 |
| 10:43.31 | Estel_ | rules file is ok? |
| 10:43.56 | merlin1991 | get rid of the --buildsystem=cmake |
| 10:44.01 | merlin1991 | but otherwise rules should work |
| 10:44.02 | Estel_ | freemangordon, dafuq? payment application? |
| 10:44.07 | Estel_ | connected to which interface? |
| 10:44.15 | Estel_ | merlin1991, ok |
| 10:44.28 | freemangordon | And having in mind that there is kind of HW security supported, lets see hw it will develop |
| 10:44.37 | freemangordon | Estel_, yes, NFC |
| 10:44.54 | Estel_ | what does than stand for, other than no fuckin clue |
| 10:45.00 | Estel_ | near field com? |
| 10:45.04 | freemangordon | yep |
| 10:45.11 | Estel_ | they couldn't take worse shortcut name |
| 10:45.12 | *** join/#maemo k273 (~Zerosubs@39.213.111.108) |
| 10:45.16 | freemangordon | :D |
| 10:45.31 | freemangordon | what about PCI? |
| 10:45.34 | Estel_ | merli, empty lines betwen acapits ind escription also must contain space? |
| 10:45.42 | Estel_ | PCI desktop interface :OP |
| 10:46.16 | freemangordon | Payment Card(s) Industry |
| 10:46.22 | merlin1991 | Estel_: yes, anything the belongs to the description apart form the first line has to start with a space |
| 10:46.25 | Estel_ | s/merli/merlin1991/ |
| 10:46.32 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 10:46.36 | Estel_ | roger roger |
| 10:46.43 | Estel_ | experience is rising to heavens ;) |
| 10:49.19 | Estel_ | after df in rules file, should I keep $@ ? |
| 10:49.33 | merlin1991 | yes |
| 10:49.36 | Estel_ | (after getting rid of --buildsystem=cmake) |
| 10:49.38 | Estel_ | ok |
| 10:49.46 | Estel_ | what exactly this tag means? |
| 10:49.54 | merlin1991 | it's shortcut to the old way of debhelper where you had to have a line for every friggin dh_* script |
| 10:50.52 | merlin1991 | rules file is called like "make dh_shlibdebs" and the %: rule grabs that and just runs it |
| 10:51.29 | Estel_ | understood |
| 10:51.36 | Estel_ | where have yopu learned all of this ;) |
| 10:53.46 | *** join/#maemo MrPingu (~MrPingu@86.92.226.97) |
| 10:54.59 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 11:00.43 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-84-220-62-226.clienti.tiscali.it) |
| 11:02.29 | DocScrutinizer51 | freemangordon: IHI0014Q_etm_architecture_spec.pdf p129 "3.5 detailed register descriptions" ETMACTR [13:10] |
| 11:02.49 | *** join/#maemo zap_ (~zap@213.59.86.89) |
| 11:03.19 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 11:05.46 | *** join/#maemo maybeArgh (~cl@p5B1657DF.dip.t-dialin.net) |
| 11:06.57 | lardman | watches Olympic torch travel through Frome, presumably not too dangerous there with only 3 outrunners |
| 11:07.27 | lardman | online I hasten to mention ;) |
| 11:11.43 | Estel_ | lardman, yesterday they fallen with torch due to light wind |
| 11:11.52 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 11:12.11 | Estel_ | but on Ukraine, as protest against UEFA EURO, 2 femminist activists devastated some footbal cup |
| 11:12.16 | lardman | Estel_: yes, made me laugh that even for an RRP ~£500 torch, it won't stay lit ;) |
| 11:12.34 | lardman | devastated? |
| 11:12.50 | Estel_ | first one went topless with quite obscenic writing on stomach, and, after short consternation, guards kicked at her - then, 2nd one picked cup and threw it to the ground |
| 11:12.54 | Estel_ | little tricky ;) |
| 11:13.19 | Estel_ | s/kicked/jumped/ |
| 11:13.24 | Estel_ | jumped, not kicked |
| 11:13.25 | lardman | ah ok a real cup, I thought you meant a match |
| 11:13.31 | Estel_ | haha |
| 11:13.57 | Estel_ | although I don't support devastation, I feel quite sympathetic for them ;) |
| 11:14.12 | Estel_ | ammount of corruption during preparing EURO on ukraine is gigantic, with uefa blessing |
| 11:14.34 | Estel_ | well, even here in Poland it doesn't look bright, and only one aprt that is going to make money on this shit is UEFA |
| 11:14.53 | Estel_ | but msot sheeps are regulatory happy about it ;) |
| 11:15.02 | lardman | (I also briefly wondered whether you meant this climbing into a football stadium ;) : http://www.seibertron.com/transformers/news/tf-rotf-devastator-concept-art-overload-robot-mode/16446/) |
| 11:20.32 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 11:23.04 | Estel_ | merlin1991, still builder failed with same output (lack of) :( |
| 11:23.17 | Estel_ | failed and no reason provided, and in detailed log, last line is |
| 11:23.28 | Estel_ | [2012-05-22 14:08:24] cd /home/builder2/maemo-fremantle-i386-extras-devel/work/ereswap-1.0 && dpkg-checkbuilddeps |
| 11:23.34 | Estel_ | [2012-05-22 14:08:24] Cleaning up... |
| 11:23.40 | Estel_ | [2012-05-22 14:08:24] Removing temporary target... |
| 11:23.46 | Estel_ | [2012-05-22 14:08:25] Done. |
| 11:23.50 | Estel_ | = exactly like before |
| 11:23.58 | Estel_ | WTF autobuilder wants from me to provide/fix? |
| 11:24.13 | *** join/#maemo radic (~radic@178.2.208.7) |
| 11:25.39 | Estel_ | Link to actual tarball ---> https://garage.maemo.org/builder/fremantle/ereswap_1.0/sources/ereswap_1.0.tar.gz |
| 11:25.39 | *** join/#maemo Hurrian (~hurrian@121.54.2.104) |
| 11:26.05 | Estel_ | I've added spaces as recommended + removed unnecesary line from rule |
| 11:26.51 | Estel_ | any help appreciated, would like to push this bugger through. |
| 11:27.39 | Estel_ | maybe something with dependencies? It doesn't depent on anything excepot debhelper for build... |
| 11:28.18 | *** join/#maemo hurbu (~hurbanza@81-174-24-206.dynamic.ngi.it) |
| 11:28.24 | Estel_ | Should I remove ${shlibs:Depends} ? I don't think so... |
| 11:29.20 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 11:29.32 | X-Fade | Estel_: Are you using windows to edit these files? |
| 11:29.43 | Estel_ | nope, edited on Maemo |
| 11:29.50 | Estel_ | I did everything on device |
| 11:30.25 | Estel_ | frankly, I suspect it's my fault, not autobuilder's (i'm doing it for the first time this way - very first was with truecrypt source, not entirely my own fioles) |
| 11:30.33 | Estel_ | s/fioles/files/ |
| 11:31.01 | Estel_ | probably I just did something wrong way, can't figure what though. |
| 11:31.25 | X-Fade | Your control file looks messy. |
| 11:31.45 | Estel_ | nods |
| 11:31.47 | X-Fade | Empty lines in description need a dot. |
| 11:31.51 | Estel_ | which part may be wrong? description still? |
| 11:31.59 | Estel_ | 0_o good to know |
| 11:32.02 | merlin1991 | hm the empty line after the dscription shouldn't be there |
| 11:32.32 | X-Fade | And all that crap in the description is also not needed. |
| 11:32.33 | *** join/#maemo kent_autistic (~user@112.201.222.115) |
| 11:32.40 | X-Fade | That is what instructions are for ;) |
| 11:33.12 | X-Fade | You're putting your whole life story in there :D |
| 11:33.27 | *** join/#maemo markm (~markm@188-222-192-176.zone13.bethere.co.uk) |
| 11:34.07 | Estel_ | :d wanted to be verbose, but You're right |
| 11:34.29 | Estel_ | will move it to man inside and clean |
| 11:34.31 | X-Fade | Description also has some specific rules. |
| 11:34.34 | *** join/#maemo etrunko (~etrunko@201.53.206.215) |
| 11:34.51 | X-Fade | first line is short description, next lines are the regular description |
| 11:34.55 | Estel_ | I'm all ears with feets. I're red about mentioning that it's command-line tool |
| 11:35.01 | kent_autistic | guys, we are having problems with facebook sharing plugin. more info at http://talk.maemo.org/showthread.php?t=84410 |
| 11:35.07 | kent_autistic | any ideas why? |
| 11:35.29 | X-Fade | Estel_: http://www.debian.org/doc/debian-policy/ch-controlfields.html#s-f-Description |
| 11:35.38 | Estel_ | thanks a lot X-Fade (and merlin1991), fixing it... |
| 11:35.55 | X-Fade | Estel_: ^^ That doc describes it all. |
| 11:38.23 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 11:41.11 | Estel_ | X-Fade, thanks, went through it |
| 11:41.24 | Estel_ | although, some doesn't apply here, yep? I haven't seen any md5sums on .changes file |
| 11:41.28 | Estel_ | (maemo one) |
| 11:41.30 | Estel_ | only in .dsc |
| 11:41.50 | Estel_ | put aside details like lack of sha256 sum, sha1 and md5sum only. right? |
| 11:42.40 | *** join/#maemo DocScrutinizer (~halley@openmoko/engineers/joerg) |
| 11:45.56 | *** join/#maemo hurbu (~hurbanza@81-174-24-175.dynamic.ngi.it) |
| 11:47.21 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 11:50.16 | *** join/#maemo mzanetti (~mzanetti@server1.muehlhaeuser.de) |
| 11:51.04 | Estel_ | X-Fade, what about /debian/changelog? is it ok? |
| 11:51.26 | Estel_ | documentation says about dots and spaces, but, scavenging changes files from other packages in repos, I don't see anything like that |
| 11:53.11 | *** join/#maemo GeneralAntilles (~ryan@Maemo/community/contributor/GeneralAntilles) |
| 11:56.17 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 11:57.55 | DocScrutinizer51 | anybody else thinks wiki page design or CSS sheet sucks sonce months? |
| 11:58.14 | DocScrutinizer51 | buzzword "BETA" et all |
| 12:01.46 | *** join/#maemo ZogG_laptop (~ZogG_lapt@bzq-79-177-194-118.red.bezeqint.net) |
| 12:05.23 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 12:06.18 | *** join/#maemo vbenes (vbenes@nat/redhat/x-sphcdxoqrpesprrh) |
| 12:10.06 | *** join/#maemo vbenes (vbenes@nat/redhat/x-zabvgotnxrwtiojw) |
| 12:14.34 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 12:16.58 | Estel_ | fixed all things as suggested and trying to upload again... |
| 12:23.48 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 12:25.02 | Estel_ | X-Fade, still failed :( |
| 12:26.04 | Estel_ | strange, it created both 1386.root.log.OK.txt and 1386.root.log.FAILED.txt |
| 12:26.05 | Estel_ | 0_o |
| 12:26.38 | Estel_ | 1386.root.log.OK.txt one got same content as former reports, although, FAILEd one got some usefull info, actually |
| 12:27.34 | Estel_ | https://garage.maemo.org/builder/fremantle/ereswap_1.0/i386.build.log.FAILED.txt |
| 12:27.44 | Estel_ | cp: cannot stat `./data/adjust-rcS-late': No such file or directory |
| 12:27.52 | Estel_ | dh_install: cp -a ./data/adjust-rcS-late debian/ereswap/home/user/.ereswap/ returned exit code 1 |
| 12:27.56 | Estel_ | wtf? |
| 12:28.32 | Estel_ | file is actually called adjust-rcS-late.sh |
| 12:28.39 | Estel_ | points out on .sh |
| 12:29.20 | X-Fade | Estel_: Check your debian/install file |
| 12:30.38 | Estel_ | yea, noticed that as well, I'm dumbie |
| 12:30.47 | Estel_ | actually, like hell |
| 12:30.54 | Estel_ | ~ashamed |
| 12:30.54 | infobot | ashamed is probably an exemplary example of a nerd baller |
| 12:31.11 | Estel_ | ;) sorry, should notice it myself before asking |
| 12:31.32 | X-Fade | Good thing is that the builder doesn't make this stuff up :) |
| 12:33.06 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 12:34.58 | *** join/#maemo Dibblah (~Dibblah@host86-137-245-98.range86-137.btcentralplus.com) |
| 12:35.01 | Estel_ | yea :) |
| 12:38.05 | Estel_ | YEA, build suceed! |
| 12:38.16 | Estel_ | X-Fade, merlin1991 huge, huge thanks |
| 12:38.25 | Estel_ | finally I've something that works to base further work upon |
| 12:40.04 | *** join/#maemo MrPingu (~MrPingu@86.92.226.97) |
| 12:40.45 | *** join/#maemo aloril (~aloril@dsl-tkubrasgw3-fe7ef900-153.dhcp.inet.fi) |
| 12:42.23 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 12:51.45 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 12:59.38 | *** join/#maemo LaoLang_cool (~LaoLang_c@221.226.175.139) |
| 13:01.18 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 13:05.25 | *** join/#maemo jargon- (~dayo@unaffiliated/jargon-) |
| 13:06.11 | *** join/#maemo narcos (~fnar@vm11917.vps.tagadab.com) |
| 13:06.26 | *** join/#maemo Pali (~pali@unaffiliated/pali) |
| 13:10.53 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 13:12.10 | *** join/#maemo mzanetti (~mzanetti@server1.muehlhaeuser.de) |
| 13:16.23 | *** join/#maemo mase76 (~mase76@p5DD39166.dip.t-dialin.net) |
| 13:20.58 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 13:30.53 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 13:33.21 | *** join/#maemo penguinbait (~snoopy@173-10-44-233-Michigan.hfc.comcastbusiness.net) |
| 13:33.28 | *** join/#maemo penguinbait (~snoopy@Maemo/community/contributor/penguinbait) |
| 13:40.41 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 13:44.40 | *** join/#maemo hardaker (~hardaker@mail.hardakers.net) |
| 13:45.10 | *** join/#maemo valeriusM (~user@95.153.173.8) |
| 13:45.48 | *** join/#maemo xev (~xev@unaffiliated/xev) |
| 13:46.13 | *** join/#maemo NishanthMenon (~nmenon@192.91.66.186) |
| 13:50.52 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 13:58.37 | *** join/#maemo smoe (~seltmann@lvps83-169-1-135.dedicated.hosteurope.de) |
| 13:58.51 | *** part/#maemo smoe (~seltmann@lvps83-169-1-135.dedicated.hosteurope.de) |
| 14:00.55 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 14:01.21 | Estel_ | Woody14619, ivgalvez, ping? |
| 14:03.06 | Estel_ | #maemo, http://maemo.org/packages/ereswap <- it's effect of efforts and my endless question to You all :) |
| 14:03.16 | Estel_ | if anyone feel it usable and/or willing to tes, i'll be glad |
| 14:03.20 | Estel_ | enjoy! |
| 14:04.38 | *** join/#maemo sq-one (~sq-one@p549AB42D.dip.t-dialin.net) |
| 14:05.08 | *** join/#maemo LaoLang_coo_ (~LaoLang_c@221.226.175.139) |
| 14:09.42 | *** join/#maemo rm_work (~rm_you@Maemo/community/cssu/rm-you) |
| 14:10.09 | kent_autistic | anybody familiar with fbreader? |
| 14:10.21 | *** join/#maemo setanta (setanta@nat/indt/x-lsicugpybutemocc) |
| 14:10.52 | jaska | depends on what familiar means, i have read .epub:s with it |
| 14:11.01 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 14:13.19 | *** join/#maemo sobczyk (~sobczyk@77-253-243-178.adsl.inetia.pl) |
| 14:13.45 | sobczyk | hi, is there any hope of getting the usb port fixed after warranty? |
| 14:14.01 | sobczyk | it's not yet completely detached, but getting loose |
| 14:18.30 | *** join/#maemo wmarone (~wmarone@c-67-174-151-253.hsd1.ca.comcast.net) |
| 14:18.39 | rm_work | sobczyk: by nokia, no -- even if it was under warranty, they would send you back a different device, not fix it :/ |
| 14:21.08 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 14:21.30 | luke-jr | anyone encounter N900 that says it's charging, but doesn't? :/ |
| 14:22.18 | kent_autistic | jaska: is there really no kinetic scrolling in fbreader? |
| 14:22.21 | *** join/#maemo freemangordon (freemangor@130-204-50-168.2074221835.ddns.cablebg.net) |
| 14:22.52 | jaska | i scroll by page anyway |
| 14:22.56 | jaska | so dont know |
| 14:23.35 | jaska | i never even wanted that feature so havent looked for it |
| 14:24.04 | kent_autistic | do you it in portrait orientation? |
| 14:24.17 | kent_autistic | do you use it in portrait orientation? |
| 14:24.18 | jaska | yeah, portrait, using the volume keys for page scrolling |
| 14:24.42 | Estel_ | sobczyk, only fellow maemo users can repair it for You |
| 14:24.43 | sobczyk | rm_work: what about soldering? |
| 14:24.46 | Estel_ | for a feww/donation |
| 14:24.53 | Estel_ | or You can done it on Your own |
| 14:25.02 | *** join/#maemo javispedro (~javier@Maemo/community/contributor/javispedro) |
| 14:25.14 | Estel_ | if going via other maemo user way, You must consider paying for work and shipping |
| 14:25.37 | Estel_ | work is mostly a bargain, considering ammoung of work needed to fix it by hand, shipping can get worse, both sides |
| 14:25.54 | Estel_ | sobczyk, the main problem is that evgen if Your port hjaven't feel appart... |
| 14:26.04 | Estel_ | if port's pad is loose on motherboard |
| 14:26.10 | Estel_ | it wont be easily fixable |
| 14:26.15 | rm_work | sobczyk: i think this is possible, but you need to find someone who knows how to take the device apart (and put it back together!) safely without damaging it, and is good at soldering very small parts that are very close to other fragile things. |
| 14:26.20 | Estel_ | only pads thaT ARE INTACT ARE QUITE EASY |
| 14:26.30 | Estel_ | sorry, caps |
| 14:26.54 | rm_work | i had my USB port completely break off, but I think it still would have been possible to fix by someone who was REALLY good at soldering |
| 14:26.59 | sobczyk | already disassembled it, I own a soldering station |
| 14:27.00 | Estel_ | dissasembling and assembling is trivial, soldering is while troubles start |
| 14:27.21 | Estel_ | sobczyk, unless it's a ifnra red station, You probably mean just ressistive soldering iron with temp control? |
| 14:27.34 | sobczyk | I already soldered 0402 SMDs so Im rather comfortable with it |
| 14:27.39 | Estel_ | I've already fixed many N900's for fellow Maemo users (usb ports) |
| 14:27.46 | Estel_ | sobczyk, so just do it |
| 14:27.59 | Estel_ | if You got thin enough soldering tip... |
| 14:28.04 | Estel_ | you should be good |
| 14:28.11 | *** join/#maemo t_s_o (~tso@84.48.230.202) |
| 14:28.18 | Estel_ | then, after soldering, reinforce port as per dr_frost_dk's instructions |
| 14:31.40 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 14:35.03 | sobczyk | ok now I see why soldering with reisistive tip might be a problem, the shield just behind the usb gets in the way |
| 14:35.43 | *** join/#maemo setanta_ (setanta@nat/indt/x-ikgutkygbjimzpww) |
| 14:35.48 | Estel_ | You can remove part of it |
| 14:40.08 | *** join/#maemo k273 (~Zerosubs@39.213.111.108) |
| 14:42.15 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 14:49.52 | *** join/#maemo ruskie (ruskie@sourcemage/mage/ruskie) |
| 14:51.03 | *** join/#maemo beford (~fernando@unaffiliated/beford) |
| 14:52.49 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 14:58.11 | *** join/#maemo Darkchaos (~darkchaos@i59F79D14.versanet.de) |
| 14:58.37 | *** join/#maemo mhlavink_afk (quassel@nat/redhat/x-cjtjgcyckdpvprod) |
| 14:59.42 | Estel_ | does anyone know, if javispedro 's c FM Radio have an option to listen through speaker? |
| 14:59.54 | Estel_ | s/speaker/speakers/ |
| 15:00.21 | Estel_ | of course I know it's possible via messing with alsa, but I'm asking about it's GUI |
| 15:01.30 | *** join/#maemo Cor-Ai (cor-ai@ua-83-227-245-131.cust.bredbandsbolaget.se) |
| 15:03.21 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 15:07.20 | javispedro | Estel_: I don't know if the extras release has, but latest source tarballs have several options for you to choose how to actually do the mixing =) |
| 15:12.38 | Hurrian | Estel_, nice script ;) |
| 15:12.42 | *** join/#maemo valeriusM (~user@85.26.180.130) |
| 15:13.44 | Hurrian | may I suggest keeping the config in /home/user/.config/ereswap |
| 15:13.52 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 15:14.20 | DocScrutinizer51 | javispedro: what's your take on ARM ETB / ETM / STM / CoreSight on N900? |
| 15:15.14 | javispedro | as in, trace block? |
| 15:15.30 | DocScrutinizer51 | yup |
| 15:16.00 | javispedro | you probably know that better than I do, I don't even know what are the pins under the battery |
| 15:16.03 | DocScrutinizer51 | we might get really great 'coredumps' |
| 15:16.14 | *** join/#maemo ferdna (~ferdna@cpe-67-10-220-35.elp.res.rr.com) |
| 15:16.16 | DocScrutinizer51 | nah |
| 15:16.21 | javispedro | .oO(jtag?) |
| 15:17.13 | DocScrutinizer51 | it's a buffer (6.8k iirc) that traces opcodes data of reg and timestamps and can get read out from CPU in my book |
| 15:17.29 | *** join/#maemo jargon- (~dayo@unaffiliated/jargon-) |
| 15:17.30 | DocScrutinizer51 | of course also via jtag |
| 15:17.53 | *** join/#maemo dos1 (~dos@unaffiliated/dos1) |
| 15:18.27 | javispedro | that'd make for interesting performance counters |
| 15:18.42 | DocScrutinizer51 | yep |
| 15:18.56 | DocScrutinizer51 | all sorts of highly interesting things |
| 15:19.17 | DocScrutinizer51 | see backscroll, I spammed links |
| 15:21.22 | DocScrutinizer51 | idly wonders what beagleboard guys did with ETB |
| 15:21.33 | sobczyk | i did the dr_frost_dk modifications on the usb port, but still it seems as if the port is loose, either the small pins are not attached well (I could not reach them with the iron) or the USB port loosened inside |
| 15:22.29 | DocScrutinizer51 | how can it seem loose? |
| 15:24.04 | sobczyk | when I push the connected charger plug down, info appears on n900 that I can disconnect the charger from wall socket |
| 15:24.38 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 15:27.09 | Hurrian | it probably lifts the pins when you push it down |
| 15:27.21 | Hurrian | yeah, clean it all up, and resolder |
| 15:35.22 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 15:36.02 | *** join/#maemo timeless (u4015@firefox/developer/timeless) |
| 15:39.35 | Estel_ | Hurrian, do You remember what need to be done, in order to force re-assigning of icons in Maemo's menu (alphabetically, it re-sort that by default) |
| 15:39.36 | Estel_ | ? |
| 15:41.37 | *** join/#maemo florian (~fuchs@Maemo/community/contributor/florian) |
| 15:43.35 | *** join/#maemo jonwil (~jonwil@27-33-137-199.static.tpgi.com.au) |
| 15:46.10 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 15:53.13 | *** join/#maemo mece (~mece@dsl-tkubrasgw1-fe2edc00-208.dhcp.inet.fi) |
| 15:57.02 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 15:57.54 | *** part/#maemo mece (~mece@dsl-tkubrasgw1-fe2edc00-208.dhcp.inet.fi) |
| 16:04.43 | *** join/#maemo totalizator (~totalizat@89-76-212-31.dynamic.chello.pl) |
| 16:07.50 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 16:09.25 | *** join/#maemo NIN101 (~NIN@p5DD28A9E.dip0.t-ipconnect.de) |
| 16:10.57 | *** join/#maemo eMHa (~mh@HSI-KBW-078-042-037-221.hsi3.kabel-badenwuerttemberg.de) |
| 16:19.03 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 16:25.29 | *** join/#maemo vbenes (~vbenes@ip-89-176-188-12.net.upcbroadband.cz) |
| 16:30.09 | *** join/#maemo ZogG_laptop (~ZogG_lapt@bzq-79-183-205-15.red.bezeqint.net) |
| 16:30.14 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 16:34.08 | *** join/#maemo eijk (~eijk@e178225159.adsl.alicedsl.de) |
| 16:34.37 | *** join/#maemo jd (~jade@unaffiliated/jade) |
| 16:40.22 | *** join/#maemo doc|home (~doc@gentoo/contributor/doc-007) |
| 16:41.25 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 16:43.24 | *** part/#maemo doc|home (~doc@gentoo/contributor/doc-007) |
| 16:45.21 | *** join/#maemo ZogG (~zoggrules@bzq-79-183-205-15.red.bezeqint.net) |
| 16:48.32 | *** join/#maemo eijk (~eijk@e178225159.adsl.alicedsl.de) |
| 16:48.53 | *** join/#maemo ponyofdeath (~vladi@cpe-75-80-173-94.san.res.rr.com) |
| 16:50.00 | *** join/#maemo nox- (noident@freebsd/developer/nox) |
| 16:50.04 | *** join/#maemo mece (~mece@dsl-tkubrasgw1-fe2edc00-208.dhcp.inet.fi) |
| 16:50.56 | *** join/#maemo Arkenoi (~ark@81.200.13.82) |
| 16:52.40 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 16:53.15 | *** join/#maemo peetah (~peetah@cha92-9-82-236-202-86.fbx.proxad.net) |
| 17:01.26 | *** join/#maemo ZogG_laptop (~ZogG_lapt@bzq-79-183-205-15.red.bezeqint.net) |
| 17:04.11 | *** join/#maemo Atarii (~Atarii@unaffiliated/atarii) |
| 17:04.14 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 17:06.46 | *** join/#maemo hardaker (~hardaker@mail.hardakers.net) |
| 17:15.21 | *** join/#maemo Venusaur (~desu@wikipedia/Antonio-Lopez) |
| 17:15.42 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 17:17.03 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-62-10-97-53.clienti.tiscali.it) |
| 17:20.38 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 17:21.58 | *** join/#maemo r00t|home (~r00t@port-83-236-58-48.dynamic.qsc.de) |
| 17:27.42 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-84-220-243-23.clienti.tiscali.it) |
| 17:37.54 | *** join/#maemo narcos (~fnar@vm11917.vps.tagadab.com) |
| 17:38.02 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-84-221-12-174.clienti.tiscali.it) |
| 17:53.44 | *** join/#maemo Pali (~pali@unaffiliated/pali) |
| 17:54.04 | *** join/#maemo trbs (~trbs@2001:470:d2ad:1:4a5b:39ff:fe7d:1623) |
| 17:56.24 | *** join/#maemo rcg1 (~rc@84.122.33.18.dyn.user.ono.com) |
| 17:59.11 | *** join/#maemo robink (~quassel@unaffilated/robink) |
| 18:02.08 | *** join/#maemo ZogG_laptop (~ZogG_lapt@bzq-79-183-205-15.red.bezeqint.net) |
| 18:15.45 | *** join/#maemo mase76 (~mase76@p5DD3AAEC.dip.t-dialin.net) |
| 18:16.04 | *** join/#maemo loganbr (~user@2002:3fcc:9d18:1:9a4b:e1ff:fe6e:ee50) |
| 18:17.04 | *** part/#maemo mece (~mece@dsl-tkubrasgw1-fe2edc00-208.dhcp.inet.fi) |
| 18:19.06 | *** join/#maemo mortenvp (~mortenvp@port463.ds1-abc.adsl.cybercity.dk) |
| 18:21.06 | *** join/#maemo M4rtinK (~M4rtinK@ip-89-102-207-166.net.upcbroadband.cz) |
| 18:31.39 | *** join/#maemo piggz (~piggz@host-92-18-203-130.as13285.net) |
| 18:31.41 | *** join/#maemo ZogG_laptop (~ZogG_lapt@bzq-79-183-205-15.red.bezeqint.net) |
| 18:35.08 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-62-10-90-244.clienti.tiscali.it) |
| 18:44.33 | *** join/#maemo Corsac (~yap@molly.corsac.net) |
| 18:45.30 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-62-10-94-195.clienti.tiscali.it) |
| 18:53.41 | *** join/#maemo zap_ (~zap@178.130.21.28) |
| 19:02.19 | *** join/#maemo piggz_ (~piggz@host-92-18-203-130.as13285.net) |
| 19:03.29 | *** join/#maemo Gadgetoid (~phil@cpc6-nrwh10-2-0-cust61.4-4.cable.virginmedia.com) |
| 19:03.59 | DocScrutinizer | http://pidgin.im/news/security/?id=62 http://pidgin.im/news/security/?id=63 |
| 19:04.42 | *** join/#maemo mase76 (~mase76@p5DD3AAEC.dip.t-dialin.net) |
| 19:08.39 | NIN101 | anybody noticed that the openssh stuff in maemo is outdated? Not sure whether there some critical vulnerabilities though. |
| 19:09.03 | *** join/#maemo MrPingu (~chatzilla@86.92.226.97) |
| 19:13.46 | *** join/#maemo vbenes (~vbenes@ip-89-176-188-12.net.upcbroadband.cz) |
| 19:13.53 | *** join/#maemo ferdna (~ferdna@cpe-67-10-220-35.elp.res.rr.com) |
| 19:16.35 | *** join/#maemo dafox (~dafox@ip51cc571d.speed.planet.nl) |
| 19:19.03 | *** part/#maemo valeriusN (~valeriusN@xmpp.jrudevels.org) |
| 19:19.25 | *** join/#maemo valeriusN (~valeriusN@xmpp.jrudevels.org) |
| 19:20.05 | *** join/#maemo beford (~fernando@unaffiliated/beford) |
| 19:22.25 | *** join/#maemo e-yes (~e-yes@213.5.78.147) |
| 19:24.26 | *** join/#maemo sq-one (~sq-one@p549AB42D.dip.t-dialin.net) |
| 19:37.05 | Macer | wow |
| 19:37.13 | Macer | something that is seriously irritating me about the lumia 900 |
| 19:37.19 | Macer | the damn wifi turns off when you put it in sleep mode |
| 19:37.31 | Macer | and turns back on when you wake it up. totally screwing over my gtalk client |
| 19:40.58 | *** join/#maemo petur (~petur@rockbox/developer/petur) |
| 19:46.35 | DocScrutinizer | NIN101: good point |
| 19:48.15 | *** join/#maemo dafox (~dafox@ip51cc571d.speed.planet.nl) |
| 19:52.30 | *** join/#maemo peetah (~peetah@cha92-9-82-236-202-86.fbx.proxad.net) |
| 19:53.42 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-84-220-242-9.clienti.tiscali.it) |
| 19:56.16 | *** join/#maemo Dynamit (~alexander@h85-238-207-23.dynamic.se.alltele.net) |
| 20:00.11 | Sicelo | luke-jr: yes, i've had a few times of N900 with blinking orange on wallwart, apparently charging, but actually discharging |
| 20:03.00 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-62-10-97-153.clienti.tiscali.it) |
| 20:03.51 | Sicelo | Estel_: maybe you can persuade javispedro to release an update to the radio then. also add the ability to advance frequencies by 0.5MHz intervals. only FM Radio (pycage) supports that afaik |
| 20:04.27 | Sicelo | meh, 0.05MHz :) |
| 20:04.44 | luke-jr | Sicelo: this is on car charger and PC :/ |
| 20:05.58 | luke-jr | is $220 a reasonable price for a barely-used N900 these days? |
| 20:06.13 | Sicelo | in all the times i've had that, it's the charger connection that was at fault, not n900. you could possibly check with bq27200.sh script |
| 20:07.37 | Sicelo | btw, how's the Gentoo effort? |
| 20:10.39 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-84-220-57-196.clienti.tiscali.it) |
| 20:11.26 | *** join/#maemo hurbu (~hurbanza@81-174-24-197.dynamic.ngi.it) |
| 20:16.55 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-62-10-92-228.clienti.tiscali.it) |
| 20:17.31 | *** part/#maemo ioan (ioan@unaffiliated/ioan) |
| 20:22.51 | *** join/#maemo cwoodward (~Woody@66-162-186-66.static.twtelecom.net) |
| 20:38.08 | *** join/#maemo vblazquez (~vic@109.36.15.37.dynamic.jazztel.es) |
| 21:07.52 | *** join/#maemo b0unc3 (~b0unc3@dynamic-adsl-62-10-93-123.clienti.tiscali.it) |
| 21:08.02 | *** join/#maemo archeyDevil (~archeyDev@unaffiliated/archeydevil) |
| 21:09.57 | *** join/#maemo mavhc (~mavhc@cpc3-basf10-2-0-cust617.12-3.cable.virginmedia.com) |
| 21:16.12 | *** join/#maemo archeyDevil (~archeyDev@unaffiliated/archeydevil) |
| 21:17.25 | *** join/#maemo setanta_ (setanta@nat/indt/x-xeraqichtlnmcjpf) |
| 21:18.39 | *** join/#maemo _federico3 (~fede@86-41-41-51-dynamic.b-ras2.dbn.dublin.eircom.net) |
| 21:26.51 | *** join/#maemo hurbu_ (~hurbanza@81-174-24-230.dynamic.ngi.it) |
| 21:28.10 | *** join/#maemo archeyDevil (~archeyDev@unaffiliated/archeydevil) |
| 21:37.34 | *** join/#maemo FireFly (~firefly@unaffiliated/firefly) |
| 21:44.56 | petur | trying to hunt down bad battery life, phone seems stuck in C2 most of the time, power domain 'per' being active... am I correct that this is uarts and stuff? Any hints at what could be causing it? Recently reflashed, running kp50 and cssu-testing. |
| 21:45.43 | *** join/#maemo rtghuzhg (~htzhztrt@DSL01.212.114.254.91.ip-pool.NEFkom.net) |
| 21:54.30 | *** join/#maemo DrGrov (~C.J@a91-153-77-41.elisa-laajakaista.fi) |
| 21:56.03 | DocScrutinizer51 | err, I'm not sure waht 'per' includes |
| 21:58.43 | petur | maybe I should reflash and check step by step, wasting too much time tracking this down |
| 22:00.24 | *** join/#maemo Facefox (~facefox@pool-74-111-197-200.lsanca.fios.verizon.net) |
| 22:04.37 | *** join/#maemo ZogG_laptop (~ZogG_lapt@bzq-79-183-205-15.red.bezeqint.net) |
| 22:19.23 | *** join/#maemo Termana|rdlBNC (Termana@217.18.70.242) |
| 22:24.16 | *** join/#maemo Dibblah_ (~Dibblah@host86-137-245-98.range86-137.btcentralplus.com) |
| 22:25.11 | *** join/#maemo GuySoft (~guysoft@109.226.49.120) |
| 22:27.05 | *** join/#maemo archeyDevil (~archeyDev@unaffiliated/archeydevil) |
| 22:31.58 | *** join/#maemo GNUtoo-desktop (~GNUtoo@host171-91-dynamic.54-79-r.retail.telecomitalia.it) |
| 22:37.06 | *** join/#maemo cwoodward14619 (~Woody@66-162-186-66.static.twtelecom.net) |
| 22:49.03 | *** join/#maemo hardaker (~hardaker@mail.hardakers.net) |
| 22:54.36 | ShadowJK | did you run powertop with charger connected? |
| 22:56.48 | *** join/#maemo mortenvp (~mortenvp@port463.ds1-abc.adsl.cybercity.dk) |
| 22:57.18 | GNUtoo-desktop | hi, does someone knows the mcBSP here? I wonder if I can read CLKXI in a register? |
| 22:58.39 | *** join/#maemo archeyDevil (~archeyDev@unaffiliated/archeydevil) |
| 23:01.52 | *** join/#maemo Dragnslcr (~scott@c-76-118-7-184.hsd1.ma.comcast.net) |
| 23:11.11 | *** join/#maemo schen (~schen@507080E4.static.ziggozakelijk.nl) |
| 23:14.16 | Hurrian | Estel_, I'm sorry, but I don't know. (I use Catorise to sort my stuff for me) |
| 23:15.39 | *** join/#maemo ZogG_laptop (~ZogG_lapt@bzq-79-181-197-249.red.bezeqint.net) |
| 23:23.31 | *** join/#maemo ZogG (~zoggrules@bzq-79-181-197-249.red.bezeqint.net) |
| 23:24.04 | *** join/#maemo robink_ (~quassel@fatcat.creosotehill.org) |
| 23:28.55 | *** join/#maemo archeyDevil (~archeyDev@unaffiliated/archeydevil) |
| 23:32.45 | *** join/#maemo Termana|rdlBNC (Termana@217.18.70.242) |
| 23:39.26 | *** join/#maemo PeterWolf (~peter@118-169-38-167.dynamic.hinet.net) |
| 23:58.25 | *** join/#maemo xev_ (~xev@60.52.88.58) |
