00:00.35 | cr2 | hahaha. sorry. |
00:00.38 | cr2 | CROSS_COMPILE=arm-angstrom-linux-gnueabi- |
00:01.11 | cr2 | make -j 10 |
00:01.13 | psokolovsky_ | cr2, .config I sent you not EABI, sure! don't build it as such, pls! |
00:01.37 | psokolovsky_ | cr2, and btw, what toolchain you use? |
00:02.04 | cr2 | 4.1.1 from angstrom |
00:02.19 | cr2 | Kevin2: what about you ? |
00:02.27 | psokolovsky_ | cr2, that's bad. |
00:02.34 | cr2 | i know ;) |
00:02.52 | cr2 | i'll try 3.4.1 |
00:03.10 | psokolovsky_ | if possible |
00:03.48 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
00:04.22 | goxboxlive | i had to rebbot because of the compilig kill my machine |
00:05.15 | cr2 | psokolovsky_: the LCD went black. that's it. |
00:05.29 | goxboxlive | ? |
00:05.49 | psokolovsky_ | cr2, on boot? |
00:05.53 | cr2 | compliling with 3.4.1 |
00:05.54 | cr2 | yes. |
00:06.54 | cr2 | goxboxlive: it seems you need a new notebook. |
00:07.17 | psokolovsky_ | cr2, well, then I missed something important in hw config ;-(. can you run menuconfig and check hw settings, but not change anything else? |
00:08.04 | cr2 | ok. after i have tried this kernel. |
00:08.32 | goxboxlive | cr2: No, it's a good machine, but i have had some problems with compiling kernels after moved form kubuntu -> debian. I switched distro because suspend/resume doesnt work with kubuntu. |
00:09.28 | cr2 | psokolovsky_: it seems you have included everything :) |
00:09.38 | cr2 | even with make -j it takes some time. |
00:09.41 | psokolovsky_ | cr2, so, what's wrong? ;-) |
00:10.09 | psokolovsky_ | cr2, sorry, did you boot kernel build from config I sent you? |
00:10.21 | cr2 | yes. |
00:10.51 | cr2 | with mtd, ide and other weird stuuff :) |
00:11.03 | cr2 | ipv6 |
00:11.16 | psokolovsky_ | cr2, ipv6 is m |
00:11.37 | Kevin2 | $ arm-linux-gcc --version |
00:11.37 | Kevin2 | arm-linux-gcc (GCC) 4.0.2 |
00:11.41 | psokolovsky_ | cr2, so, fix hw config as needed ;-) |
00:11.44 | Kevin2 | cr2: Your kernel is now booting? |
00:12.28 | cr2 | the same result: black screen. |
00:12.37 | cr2 | 3.4.1 from hh.org |
00:12.46 | cr2 | ok. |
00:13.00 | psokolovsky_ | cr2, black screen means LCD probs, right? |
00:13.19 | goxboxlive | psokolovsky_ mine |
00:13.30 | goxboxlive | booted, but the same problem |
00:13.40 | goxboxlive | But the text is SO small |
00:14.08 | goxboxlive | no, wait a little, i have to look at the screen |
00:15.21 | cr2 | change the font to normal 8x16 vga |
00:15.24 | goxboxlive | yes, the same. It stops at the same place |
00:15.34 | psokolovsky_ | goxboxlive, and error message? |
00:16.06 | goxboxlive | ASIC3_MMC is the same |
00:16.15 | psokolovsky_ | yep |
00:16.25 | psokolovsky_ | is it still (0,0) ? |
00:16.29 | goxboxlive | no NFS server avaiable, giving up |
00:16.40 | psokolovsky_ | lol |
00:16.49 | goxboxlive | it tries floppy |
00:16.55 | cr2 | lol |
00:17.19 | goxboxlive | cannot open root devive unknown-block(2,0) |
00:17.21 | psokolovsky_ | so what guys you do with MMC stuff in your builds? ;-) |
00:17.36 | psokolovsky_ | goxboxlive, what is haret cmdline? |
00:17.48 | goxboxlive | and the same , please append correct root |
00:18.52 | goxboxlive | set CMDLINE "root=/dev/mmcblk0p2 console=tty0 mem=64M fbcon=rotate:1" |
00:19.06 | goxboxlive | well i am using mmcblk0p3 |
00:20.03 | cr2 | 2,0 ? is it floppy ? |
00:20.14 | psokolovsky_ | cr2, nfs iirc |
00:20.34 | cr2 | 0 brw-r----- 1 root disk 2, 0 2006-11-14 15:55 fd0 |
00:20.36 | cr2 | LOL |
00:20.50 | psokolovsky_ | somehow mmc blcok subsystem is nore registered, period |
00:21.00 | psokolovsky_ | well, maybe fd indeed ;-) |
00:21.02 | cr2 | so the floppy is registered with VFS |
00:21.23 | cr2 | looks like some hidden IPAQ conspiracy to me :) |
00:21.41 | psokolovsky_ | cr2, well, where that ls from? |
00:21.50 | cr2 | notebook. |
00:22.41 | psokolovsky_ | cr2, yeah, it;s likely because you don't define IPAQ_HANDHELD ;-D |
00:23.09 | psokolovsky_ | cr2, so, next step is to boot from initrd, login via usb/serial and see dmesg... |
00:23.10 | cr2 | i know :) |
00:23.26 | psokolovsky_ | oe maybe, try rootdelay= ? ;-) |
00:23.37 | Kevin2 | psokolovsky_: I did that (via initramfs) I don't see anything odd. |
00:23.37 | cr2 | __bdevname(ROOT_DEV, b); |
00:23.49 | cr2 | <PROTECTED> |
00:23.49 | cr2 | <PROTECTED> |
00:24.39 | psokolovsky_ | Kevin2, then what is it? |
00:25.04 | psokolovsky_ | cr2, goxboxlive, Kevin2: btw, do you get usual "p1 p2" stuff on boot? |
00:25.17 | cr2 | no. |
00:25.22 | cr2 | how ? |
00:25.37 | cr2 | if the block device name is not recognized at all. |
00:25.48 | goxboxlive | yes i am getting p1 p2 p3 p4 |
00:25.52 | cr2 | ? |
00:26.00 | psokolovsky_ | cr2, you understand what I mean, right? 2-line msg MMC subsys spits when detects a card |
00:26.05 | goxboxlive | it lists up the partitiopns on the sd card |
00:26.06 | psokolovsky_ | goxboxlive, you get? |
00:26.14 | goxboxlive | yes, in .18, but not in 19 |
00:26.18 | cr2 | yes. |
00:26.22 | psokolovsky_ | ;-) |
00:26.32 | cr2 | but to read the partition you need a block device readable. |
00:27.03 | psokolovsky_ | so, it seems that after all, the whole MMC subsys is not initialized, not just block part of it. that's at least something |
00:27.12 | cr2 | and even the block device major is not found. |
00:27.23 | psokolovsky_ | Kevin2, what about you? when do you get those lines with initramfs? |
00:27.49 | psokolovsky_ | cr2, not even block, even a card, which is more low-level ;-) |
00:27.53 | Kevin2 | Very late, I think. Hold on. |
00:29.16 | cr2 | res = register_blkdev(major, "mmc"); |
00:29.16 | cr2 | <PROTECTED> |
00:29.16 | cr2 | <PROTECTED> |
00:29.16 | cr2 | <PROTECTED> |
00:29.16 | Kevin2 | Yes, I get it after "Freeing init memory: 888K" |
00:29.17 | cr2 | <PROTECTED> |
00:29.48 | Kevin2 | mmcblk0: mmc0:b368 MD 999936KiB |
00:29.49 | psokolovsky_ | Kevin2, but that's strait impossible! |
00:29.51 | Kevin2 | <PROTECTED> |
00:29.59 | goxboxlive | well i also tried now with a gcc-3.4.4 compiled kernel, but it didnt help that either |
00:30.12 | psokolovsky_ | Kevin2, right after "Freeing"? |
00:30.24 | cr2 | goxboxlive: time to think about new initrd. so we can have asic3_mmc as a module. |
00:30.25 | Kevin2 | psokolovsky_: Yes - after Freeing. |
00:30.30 | psokolovsky_ | Kevin2, can paste dmesg somewhere? |
00:30.59 | Kevin2 | Hrmm. I'm not sure my initramfs has usb stuff in it. |
00:32.06 | Kevin2 | It doesn't - I'll have to rebuild it. |
00:32.20 | psokolovsky_ | Kevin2, rebuild just kernel ;-) |
00:33.28 | psokolovsky_ | Well, after freeing, it starts userspace. It behaves as if it loaded dynamic module, not initiliazed static driver... |
00:35.39 | goxboxlive | well it's getting late also tonight. Have to go to bed. g'night |
00:37.09 | cr2 | good night. |
00:42.24 | Kevin2 | psokolovsky_: http://pastebin.ca/265104 |
00:46.39 | psokolovsky_ | Kevin2, ok, thanks. let me boot and compare what I have |
00:48.25 | psokolovsky_ | Kevin2, weell, for me, it happens almost directly before Freeing... |
00:48.48 | psokolovsky_ | (only with IP autoconfig settings inbetween) |
00:52.24 | psokolovsky_ | Kevin2, http://pastebin.ca/265115 |
00:55.03 | psokolovsky_ | Kevin2, I wonder, could you still boot with initrd I posted? |
00:55.10 | psokolovsky_ | http://celib.sourceforge.net/linux-ppc/initrd.mc-20060614.gz |
00:55.15 | psokolovsky_ | w/o initramfs? |
00:55.26 | psokolovsky_ | because maybe it has special handling... |
00:58.04 | Kevin2 | psokolovsky_: Why? It works with initrd/initramfs, it doesn't work with root on mmc. |
00:59.00 | psokolovsky_ | Kevin2, I want to see clear case of card being detected after *real* init mem is thrown off (initramfs is artificial) |
00:59.39 | psokolovsky_ | You guys don't have any weird delays in driver probes? |
01:01.00 | Kevin2 | What command-line should I use? |
01:01.52 | Kevin2 | Do I need ramdisk support? |
01:01.54 | psokolovsky_ | from my startup.txt: |
01:01.56 | psokolovsky_ | ----------- |
01:01.57 | psokolovsky_ | # |
01:01.57 | psokolovsky_ | # HaRET startup.txt for H3900 |
01:01.57 | psokolovsky_ | # |
01:01.57 | psokolovsky_ | # h3900 |
01:01.57 | psokolovsky_ | set MTYPE 203 |
01:01.59 | psokolovsky_ | set KERNEL "zImage" |
01:02.01 | psokolovsky_ | set initrd "initrd.mc-20060614.gz" |
01:02.11 | psokolovsky_ | set cmdline "root=/dev/ram0 rw ip=192.168.2.202:192.168.2.200:192.168.2.200:255.255.255.0:ipaq:usb0 console=ttyS0,115200n8 console=tty0 ramdisk_size=8192 init=/linuxrc" |
01:02.14 | psokolovsky_ | bootlinux |
01:02.16 | psokolovsky_ | -------------- |
01:02.18 | psokolovsky_ | yes, sure, ramdisk must be enabled in kernel |
01:02.26 | psokolovsky_ | and initrd support specifically, too |
01:02.34 | Kevin2 | psokolovsky_: Leave it gzipped? |
01:02.55 | psokolovsky_ | Kevin2, yep, sure |
01:03.43 | psokolovsky_ | CONFIG_BLK_DEV_RAM=y |
01:03.43 | psokolovsky_ | CONFIG_BLK_DEV_RAM_COUNT=6 |
01:03.44 | psokolovsky_ | CONFIG_BLK_DEV_RAM_SIZE=8192 |
01:03.44 | psokolovsky_ | CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 |
01:03.44 | psokolovsky_ | CONFIG_BLK_DEV_INITRD=y |
01:05.55 | Kevin2 | What's the partition format? |
01:06.33 | psokolovsky_ | Kevin2, ext2 |
01:09.55 | Kevin2 | psokolovsky_: Okay, it booted. |
01:10.34 | psokolovsky_ | pls post dmesg |
01:10.44 | Kevin2 | Funky: I get the mmcblk0: XXX stuff after "boot: setting up /dev..." |
01:11.18 | psokolovsky_ | why-y-y-y is that delay???... |
01:11.51 | Kevin2 | I need apache specific keyboard map to setup networking.. |
01:12.23 | psokolovsky_ | Kevin2, try ssh into it, didn't you gave ip= ...? |
01:12.59 | psokolovsky_ | Kevin2, but well, can try another thing still: please try "rootdelay=10" when booting from SD card |
01:16.42 | Kevin2 | psokolovsky_: I did cut and paste ip stuff, but I need to plug/unplug usb for it to work, and that seems to clear the ips. |
01:17.58 | psokolovsky_ | Kevin2, it doesn't clear IPs here. do you mean my initrd or fam/oe image? |
01:18.19 | psokolovsky_ | anyway, never saw them clear IP w/o me asking for that... |
01:19.00 | psokolovsky_ | what about rootdelay? |
01:23.06 | Kevin2 | It is booting now. |
01:23.19 | Kevin2 | Though, I'm not sure if it is due to rootdelay or the other settings I compiled in. |
01:25.36 | Kevin2 | psokolovsky_: rootdelay does appear to be the fix.. |
01:25.49 | psokolovsky_ | wtf those universal guys ignored my hint regarding rootdelay ;-) |
01:25.55 | psokolovsky_ | Kevin2, yep, I guess |
01:26.09 | psokolovsky_ | so well, before it was known to be nneded for CF, now for MMC too |
01:26.12 | psokolovsky_ | funky ;-) |
01:26.15 | psokolovsky_ | let them know |
01:26.36 | psokolovsky_ | another bug-solution on long road to heaven ;-) |
01:26.40 | psokolovsky_ | Good night! |
01:27.16 | Kevin2 | rootdelay=1 works fine. |
01:27.21 | Kevin2 | psokolovsky_: Good night! |
02:34.13 | *** join/#htc-linux psokolovsky_ (n=psokolov@ip.85.202.124.214.dyn.sub-9.broadband.voliacable.com) |
04:18.03 | *** join/#htc-linux Ro_En_PC (n=roen@p54A65222.dip.t-dialin.net) |
04:53.50 | *** join/#htc-linux lkcl (n=lkcl@535411CB.cable.casema.nl) |
04:58.33 | lkcl | allo darlins |
05:08.43 | lkcl | i got my himalaya, blueangel and universal. hooray! |
05:11.32 | lkcl | oh jesus the himalaya code is frickin badly out-of-date. whoever put it there from 2.6.12 should be shot |
06:04.01 | lkcl | o dear rats damn gnu-haret doesn't boot hima. arg |
07:17.24 | lkcl | gone back to haret-0.3.6 eek! |
07:33.29 | Speedy2 | re lkcl |
07:42.28 | lkcl | allo Speedy2 |
07:42.49 | Speedy2 | How's it going my friend? |
07:43.06 | lkcl | good, dude. |
07:43.18 | lkcl | am supposed to be asleep |
07:43.23 | lkcl | but am doing himalaya |
07:43.23 | Speedy2 | heh |
07:43.38 | Speedy2 | I'm really interested in one of these HTC smartphones |
07:44.00 | Speedy2 | I have no cell ATM, but I think I might want one.. |
07:44.10 | Speedy2 | Err, no cell or no PDA |
08:01.38 | *** join/#htc-linux bd2_ (n=ufo@89.113.84.151) |
08:29.14 | lkcl | well i'd recommend the hermes - _when_ it's all going - because of the 6 day standby (samsung processor) |
08:31.42 | *** join/#htc-linux rmoravcik (n=rmoravci@icm1-orange.orange.sk) |
08:42.59 | *** part/#htc-linux rmoravcik (n=rmoravci@icm1-orange.orange.sk) |
09:36.24 | *** join/#htc-linux rmoravcik (n=rmoravci@icm2-orange.orange.sk) |
09:37.55 | *** join/#htc-linux rmoravcik (n=rmoravci@icm2-orange.orange.sk) |
09:45.06 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.231) |
09:45.53 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
10:17.43 | goxboxlive | yes, confirmed here. Universal boot 2.6.19-hh0 with rootdelay in default.txt |
10:26.34 | rmoravcik | goxboxlive: hi |
10:27.12 | rmoravcik | goxboxlive: i have the same problem on my rx3715 |
10:27.14 | goxboxlive | hi |
10:27.40 | goxboxlive | i c, but you are able to boot it with rootdelay right? |
10:28.24 | rmoravcik | going to test it |
10:31.20 | rmoravcik | goxboxlive: it's working |
10:40.30 | goxboxlive | good |
10:54.06 | *** join/#htc-linux BabelOued (n=Fabrice@lun34-2-82-238-28-28.fbx.proxad.net) |
11:10.21 | *** join/#htc-linux lkcl (n=lkcl@535411CB.cable.casema.nl) |
11:21.54 | BabelOued | hi lkcl |
11:23.20 | lkcl | allo babel |
11:23.43 | BabelOued | have a question :) |
11:24.02 | BabelOued | what gcc version do you use ? |
11:24.10 | lkcl | lots! |
11:24.15 | lkcl | you mean arm version |
11:24.29 | BabelOued | oh me only 3.4.1n yes arm |
11:24.35 | lkcl | lkcl@highfield:~$ arm-linux-gnu-gcc --version |
11:24.35 | lkcl | arm-linux-gnu-gcc (GCC) 4.1.2 20061028 (prerelease) (Debian 4.1.1-19) |
11:24.42 | lkcl | brb food |
11:31.22 | goxboxlive | ccr2: I tried to suspend form gpe, this si what happend (it didn work thow): http://pastebin.ca/265554 |
12:03.57 | BabelOued | fyi http://www.skyeye.org/index.shtml nice tool |
12:38.01 | cr2 | goxboxlive: the pxafb driver has bugs after update. |
12:38.55 | goxboxlive | ok |
12:41.01 | cr2 | lkcl: don't fix the himalaya code, but blueangel first. and post the usual "dump *" for himalaya to wiki. |
12:43.03 | goxboxlive | cr2: The screen rotation isent listed in interupts anymore. It hasent since the keyboard driver change. |
12:43.43 | goxboxlive | I have made keymap.map in to oe (local) and it works form the shell and in gpe, but not in opie (only shell). |
12:44.04 | cr2 | BabelOued: is it possible to run wince bootloader in skyeye ? |
12:44.33 | cr2 | goxboxlive: i get a warning about irq 165 at boot time, need to look into it. |
12:45.07 | cr2 | opie keyboard handling is completely broken as you know. |
12:45.22 | goxboxlive | <6>input: gpio-keys as /class/input/input1 |
12:45.22 | goxboxlive | <3>IRQ handler type mismatch for IRQ 165 |
12:45.24 | BabelOued | cr2: maybe, it took a memorymap.conf file in parameter |
12:46.15 | BabelOued | cr2: where did you get your cross-gcc 4.1 ? |
12:46.24 | cr2 | BabelOued: bootloader is quite primitive, but it needs 16MB RAM or so. |
12:46.30 | goxboxlive | event1 works thow: |
12:46.32 | goxboxlive | root@htcuniversal:~$ cat /dev/input/event1 |
12:46.32 | goxboxlive | }�Est}�Et}�Et}�E�}�EK: |
12:46.33 | goxboxlive | t}�EU: |
12:46.33 | goxboxlive | �E�t�E▒��ES�t�E]��E�t�E��E�~� |
12:46.41 | goxboxlive | it is the powe button. |
12:46.45 | cr2 | from OE opie build. |
12:47.05 | cr2 | goxboxlive: ok, but nobody reads/handles these events. |
12:47.15 | goxboxlive | i c |
12:47.42 | cr2 | goxboxlive: which speaker is shut off when the clamshell is moved ? |
12:48.13 | cr2 | there are 2 speaker gpios A1 and A6. A6 depends on the clamshell position. |
12:49.15 | cr2 | goxboxlive: what is the base irq for asic3 ? |
12:50.27 | goxboxlive | i dont know cr2, i did a apm --suspend so i cant test. It wouldnt wake up with the power button. And icant reboot i have to go. bbl. |
13:01.54 | BabelOued | cr2: i ve compiled .19-hh for my BA but i want to use a more recent toolchain |
13:05.33 | cr2 | get the oe, but it requires some bandwidth. i can't tar and send you mine, because i'm on amd64. |
13:08.11 | BabelOued | cr2: ok i have already OE. i try to find the good package |
13:12.05 | BabelOued | cr2: do you find base irq for asic3 ? |
13:12.14 | cr2 | it's in dmesg |
13:18.34 | BabelOued | bluetooth doesn t works :( |
13:36.33 | cr2 | BabelOued: on ba ? |
13:36.43 | BabelOued | yes |
13:36.51 | cr2 | you have a different chipset from universal |
13:37.01 | cr2 | what is the port speed ? |
13:37.23 | BabelOued | when i do hciattach /dev/ttyS3 texas, it say initialization failed |
13:37.36 | BabelOued | i try with 115200 |
13:37.44 | *** join/#htc-linux FossiFoo (n=Fossi@e176102178.adsl.alicedsl.de) |
13:39.19 | BabelOued | :( gcc 4.1.1 build failed , no luck today |
13:40.09 | cr2 | stty -F /dev/ttyS3 |
13:40.17 | cr2 | in wince it runs with 921600 |
13:40.41 | cr2 | and stty from busybox can't 921600 (a bug) |
13:43.44 | *** join/#htc-linux FossiFoo (n=Fossi@e176102178.adsl.alicedsl.de) |
13:43.55 | BabelOued | root@blueangel:~# stty -F /dev/ttyS3 |
13:43.55 | BabelOued | speed 9600 baud; |
13:43.55 | BabelOued | -brkint -imaxbe |
13:45.39 | BabelOued | humm there is a problem |
13:45.42 | BabelOued | pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART |
13:45.42 | BabelOued | pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART |
13:45.42 | BabelOued | pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART |
13:45.42 | BabelOued | pxa2xx-uart.3: ttyS3 at MMIO 0x41600000 (irq = 0) is a HWUART |
13:46.10 | BabelOued | irq = 0 ????? |
13:48.35 | cr2 | it's ok. |
13:49.38 | cr2 | but there are probably other bugs. |
13:52.55 | *** join/#htc-linux rob_w (n=bob@p85.212.192.39.tisdip.tiscali.de) |
15:19.19 | *** join/#htc-linux rmoravcik (n=rmoravci@icm7-orange.orange.sk) |
15:23.37 | BabelOued | cr2: ok , now i can boot universal angstrom image with eabi :) |
15:25.39 | BabelOued | cr2: i use this toolchain http://www.codesourcery.com/gnu_toolchains/arm/download.html |
15:25.47 | cr2 | but you need to be careful about the serial ports. |
15:26.10 | cr2 | the universal image should be "universal" :) |
15:26.10 | BabelOued | why ? |
15:26.30 | BabelOued | yes i read htcuniversal everywhere |
15:26.40 | cr2 | because IR,BT and phone have different layout. |
15:26.48 | BabelOued | but now i can use i2c tools :) |
15:27.14 | cr2 | http://wiki.xda-developers.com/index.php?pagename=HTC_Serial |
15:27.43 | *** join/#htc-linux rob__w (n=bob@p85.212.134.19.tisdip.tiscali.de) |
15:27.51 | *** join/#htc-linux doepied0e (n=dopper@84-53-96-51.fiber.unet.nl) |
15:30.09 | BabelOued | cr2: ok i understand |
15:30.39 | cr2 | BabelOued: it is also interesting to trace the mdoc G3 registers with "wi". |
15:30.40 | BabelOued | maybe later we have a config autodetect :) |
15:31.07 | cr2 | yes, it should use ${MACHINE} in the config files instead of hardcoding the ports. |
15:33.23 | BabelOued | where i set my touchscreen input dev ? |
15:34.12 | cr2 | it should be autodetected by detect-stylus |
15:34.34 | cr2 | <PROTECTED> |
15:40.50 | BabelOued | big big big icon 64x64 :) but no touchscreen 'detect-stylus --device' return nothing |
15:43.01 | cr2 | which kernel config are you using ? |
15:43.37 | BabelOued | i use a 2.6.19-hh0, and i show tsc2200 debug |
15:44.04 | cr2 | i have just added the right clock enable to blueangel_audio.c |
15:44.34 | cr2 | we should add all patches to htcblueangel/ to avoid confusion. |
15:45.03 | cr2 | ls -l /dev/input |
15:45.15 | BabelOued | i have ts0 in /dev/input |
15:46.09 | cr2 | you should have event0,... |
15:46.27 | cr2 | ts0 is some outdated stuff. |
15:46.51 | BabelOued | i forgot to modprobe evdev :) |
15:47.02 | cr2 | why do you have ts0 ? |
15:47.38 | cr2 | you can statically link evdev |
15:48.54 | BabelOued | yes i know but i got some problem while compiling .19 |
15:49.08 | BabelOued | </linux/config.h> disappear |
15:49.19 | BabelOued | ok no opie work with big big icon :) |
15:51.08 | BabelOued | maybe i have ts0 because i have this CONFIG_INPUT_TSDEV=m |
15:54.06 | cr2 | you don't need it at all. |
15:54.17 | cr2 | it's for ancient ipaqs. |
15:54.54 | cr2 | and we are not yet ready to have INPUT/TOUCHSCREENS option. |
15:59.22 | Kevin2 | cr2: Did you test if powermon now works on the jornada? |
15:59.25 | BabelOued | ok all opie works with a good size now :) |
16:01.20 | cr2 | Kevin2: will try right now. |
16:08.11 | cr2 | BabelOued: i can't compile blueangel kernel from current CVS. |
16:14.46 | BabelOued | i'm trying |
16:21.56 | BabelOued | what is your message ? |
16:22.49 | *** part/#htc-linux rmoravcik (n=rmoravci@icm7-orange.orange.sk) |
16:23.17 | cr2 | Kevin2: something strange is happening with the device. the command execution hangs on any command. |
16:23.45 | cr2 | arch/arm/mach-pxa/htcblueangel/blueangel_lcd.c:213: error: unknown field ‘set_power’ specified in initializer |
16:23.45 | cr2 | arch/arm/mach-pxa/htcblueangel/blueangel_lcd.c:213: warning: initialization from incompatible pointer type |
16:23.46 | cr2 | arch/arm/mach-pxa/htcblueangel/blueangel_lcd.c:214: error: unknown field ‘get_power’ specified in initializer |
16:23.46 | cr2 | arch/arm/mach-pxa/htcblueangel/blueangel_lcd.c:216: error: unknown field ‘set_brightness’ specified in initializer |
16:23.47 | cr2 | arch/arm/mach-pxa/htcblueangel/blueangel_lcd.c:216: warning: initialization from incompatible pointer type |
16:24.19 | cr2 | ah. backlight should go away from lcd. |
16:25.09 | Kevin2 | cr2: Do you think it is haret or the hardware? |
16:26.31 | BabelOued | cr2 : http://linuxbox2.free.fr/blueangel/blueangel_lcd.c |
16:27.27 | cr2 | BabelOued: i have cleaned it. |
16:27.39 | BabelOued | ok |
16:27.59 | BabelOued | setting brightness doesn twork for me :( |
16:28.07 | cr2 | Kevin2: it must be the hardware, but i need to investigate. |
16:28.35 | cr2 | BabelOued: i'll compare with your version. i've made a lot of changes now. |
16:31.01 | cr2 | i've simply added your version :) |
16:32.20 | cr2 | btw, why are the ati regs are still commented out in suspend ? i've done it because we have different values from hx4700 |
16:36.20 | BabelOued | i don't touch and resume/suspend work well |
16:36.32 | cr2 | MODPOST 129 modules |
16:36.36 | cr2 | not bad :) |
16:37.52 | *** join/#htc-linux skodde (n=skodde@unaffiliated/skodde) |
16:40.48 | cr2 | BabelOued: updated. but there are still many things to be done. |
16:41.07 | BabelOued | yes i know :( |
16:41.25 | BabelOued | i ve a working leds driver with new class but not cleaned |
16:41.31 | cr2 | Kevin2: can i disable ascii output with scanserial.py ? |
16:41.39 | cr2 | BabelOued: great! |
16:44.38 | BabelOued | cr2: if you want http://linuxbox2.free.fr/blueangel/htcblueangel-leds.c |
16:45.28 | Kevin2 | cr2: What's left if you don't have ascii output? (What do you want scanserial to do?) |
16:47.06 | cr2 | Kevin2: i want byte hex instead of '\x017\xfe\x02\x030' |
16:48.16 | cr2 | BabelOued: i think we should split asic3 leds from "other leds" |
16:48.29 | cr2 | there is a common driver for asic3 leds. |
16:48.38 | cr2 | hmm. i need to do the same on universal. |
16:48.48 | BabelOued | yes i see it is new from .19 |
16:49.04 | BabelOued | trigger are usefull :) |
16:49.25 | cr2 | it's even more tricky for you, because you have "simple leds" and pwm leds. |
16:53.17 | Kevin2 | cr2: Why not just use dis.py instead of scanserial.py? |
16:55.46 | cr2 | Kevin2: i want to extract a list of the TI brf6150 vendor-specific commands. |
16:55.59 | cr2 | from the btuart wi trace |
16:56.22 | cr2 | scanserial.py works great in 95% of all cases |
16:57.22 | Kevin2 | I'm still not sure what you're looking for. Maybe cut and paste some output and what you'd prefer to see? |
16:57.46 | cr2 | i have strings like '\x017\xfe\x02\x030' now |
16:57.51 | cr2 | i want it to be |
16:57.53 | Kevin2 | I guess you don't like the python '\x00' syntax and want to see something like '<00>' instead? |
16:58.45 | cr2 | ''\x01\x{hex for 7}\xfe\x03\x{hex for 0} |
16:58.55 | cr2 | i want all hex |
16:59.01 | *** join/#htc-linux WizMaui (n=WizMaui@62.112.90.231) |
16:59.08 | cr2 | without decoding to ascii |
17:00.19 | cr2 | it is very helpful for raw binary protocols. |
17:01.52 | cr2 | hmm. i'm confused now. |
17:01.56 | cr2 | '\x016\xff\x04\x00\x10\x0e\x00' |
17:02.35 | Kevin2 | Okay, I see. |
17:03.25 | Kevin2 | scanserial tries to separate lines based on a '\n' or '\r' in the input.. Does the br stuff really use these charaters as line separators? |
17:03.32 | cr2 | \x01 is "send command" ascii 6 + \xff is ogf+ocf, \0x4 is the message length, \x00\x10\x0e\x00 is the message |
17:04.05 | cr2 | no, but usually the commands are separarated in time and BTUART irqs. |
17:04.52 | cr2 | 002.262209 irq 21(BTUART) |
17:04.56 | cr2 | 002.261076-002.261087 write: '\x01\x18\x0c\x02\x00\x00' |
17:05.00 | cr2 | 002.326230 irq 22(FFUART) |
17:05.04 | cr2 | 002.333528 irq 22(FFUART) |
17:05.08 | cr2 | 002.262342-002.262357 read: '\x04\x0e\x04\x01\x18\x0c\x12' |
17:05.12 | cr2 | 002.451500-002.451510 write: '\x01\x05\x04\r' |
17:05.16 | cr2 | 002.451528 irq 21(BTUART) |
17:05.16 | cr2 | 002.468698 irq 21(BTUART) |
17:05.16 | cr2 | 002.451511-002.451526 write: '\x1f\xc0\x11x\x0c\x00\x18\xcc\x01\x00"\xb4\x01' |
17:05.17 | cr2 | 002.725663 irq 22(FFUART) |
17:05.17 | cr2 | something like that. |
17:09.14 | cr2 | the ideal solution if to dump the complete messages into hcidump-readable format, but it's too much work for little output. |
17:17.03 | Kevin2 | cr2: Pull mainline haret, and use scanserial from there. |
17:18.28 | Kevin2 | There is a line "HEXALL=0" which you can use to enable hexifying all the output. I've also improved the display of hex characters in general (it will now show as <XX> instead of \xXX). |
17:26.48 | BabelOued | cr2: any idea for bluetooth on BA ? |
17:32.05 | cr2 | Kevin2: thanks. |
17:33.03 | cr2 | BabelOued: you can try the same. trace the hwuart , and switch on bluetooth, connect the bt headset, etc. |
17:56.15 | BabelOued | cr2: all seem ok in blueangel.c. but why irq=0 for hwuart ? |
17:56.56 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
18:17.13 | *** join/#htc-linux pH5 (n=ph5@e178207147.adsl.alicedsl.de) |
18:17.36 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
18:24.45 | *** join/#htc-linux pH5 (n=ph5@e178207147.adsl.alicedsl.de) |
18:25.06 | *** join/#htc-linux wewe (n=bob@p85.212.153.75.tisdip.tiscali.de) |
18:27.11 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
18:33.33 | BabelOued | hi pH5 |
18:44.44 | lkcl | allo darlins |
18:51.03 | pH5 | hey |
18:54.39 | cr2 | lkcl: hi |
18:54.58 | lkcl | hi! |
18:55.08 | lkcl | well i am in holland and i started on the himalaya already. |
18:55.19 | lkcl | but... _damn_ the w100fb initialisation is a pain in the ass. |
18:55.39 | lkcl | i'm tempted to rip out all the 'nice' initialisation and put in the horrible-hack-job hex init stuff. |
18:55.55 | cr2 | yeah. i think it's better to finish blueangel first. |
18:55.57 | cr2 | :) |
18:56.03 | lkcl | oh _now_ you tell me ha ha |
18:56.04 | lkcl | ok. |
18:56.08 | lkcl | i find the charger for it. |
18:56.11 | lkcl | cradle. whatever. |
18:56.19 | cr2 | can you post the 'dump *' to wiki ? |
18:56.32 | cr2 | gpio, asic3, etc. |
18:56.36 | lkcl | sure. |
18:56.37 | lkcl | later. |
18:56.40 | cr2 | ok. |
18:56.41 | lkcl | for BA? |
18:56.59 | cr2 | for hima |
18:57.19 | lkcl | ok. |
18:57.53 | *** join/#htc-linux rob_w (n=bob@p85.212.153.75.tisdip.tiscali.de) |
18:59.21 | *** join/#htc-linux goxboxlive (n=goxboxli@9.80-202-160.nextgentel.com) |
19:00.35 | cr2 | goxboxlive: hi |
19:02.21 | goxboxlive | hi cr2 |
19:04.16 | goxboxlive | any news? |
19:07.36 | cr2 | where do we have the audioset values ? |
19:08.18 | cr2 | btw, do you know how to call/control the phone by voice ? |
19:10.10 | goxboxlive | I dont think voice control is included, you have to buy microsoft voicecommand or something. But you can make a call to a predefined user voice call |
19:10.55 | cr2 | can you do it with at logging enabled ? |
19:12.11 | goxboxlive | i have no idea |
19:12.18 | cr2 | another thing i can't do myself. can you do a video call with at loggin enabled ? |
19:12.32 | goxboxlive | of course |
19:13.06 | cr2 | i think we have seen 0,2,3,7 so far. |
19:13.51 | cr2 | yes. |
19:14.33 | goxboxlive | how do i do the logging during a videocall? And logging with voice call |
19:15.01 | cr2 | registry key change, and then soft reset. |
19:17.29 | cr2 | there are 2 bimodal setting i have not observed. |
19:18.04 | cr2 | and SpeechEnh plays some role there. |
19:19.39 | goxboxlive | ok cr2, i have avideocall running, now what to do |
19:22.20 | cr2 | call, say something, exit. send me the at log. |
19:23.00 | goxboxlive | but wich registry key to change |
19:25.08 | cr2 | hmm. |
19:26.05 | cr2 | SOFTWARE\OEM\ATDbgLog |
19:26.24 | cr2 | and then soft reset |
19:26.43 | cr2 | it will create the file ATdbglog in \Temp |
19:31.24 | *** join/#htc-linux WizMaui_ (n=WizMaui@62.112.90.231) |
19:40.03 | goxboxlive | Will the log file be deleted when doing a reset ? |
19:45.16 | cr2 | i think no. |
19:49.01 | cr2 | hmm. no audioset at all. |
19:49.28 | *** part/#htc-linux RoEn (n=roen@p54A65222.dip.t-dialin.net) |
19:52.01 | goxboxlive | no, no audio set,. Ok, i figured out how to do a vioce speed dial now, i log that to. without headset? Or do you want it with? (cr2) |
19:52.46 | cr2 | try both. |
19:52.53 | goxboxlive | ok |
19:53.13 | goxboxlive | is it ok in the same session (no reset between?) |
19:57.52 | cr2 | yes. |
20:02.42 | goxboxlive | send |
20:11.06 | cr2 | ok. |
20:12.05 | goxboxlive | i started the first voice speed call at 20:56 |
20:15.02 | goxboxlive | I tried out lamikr gomunicator with the latest changes in the xanadux cvs, but it failed cause of the battery reading. It tred to read my battery status and i got a segmention fault. |
20:15.48 | cr2 | because there is no such command on universal. |
20:15.52 | cr2 | afaik. |
20:16.18 | goxboxlive | ok, habe to figure out a way to disable it then. |
20:19.13 | cr2 | uff. you have 1.06 radio. |
20:19.25 | goxboxlive | no, 1.13 |
20:20.32 | cr2 | ok, not 1.04 |
20:20.58 | goxboxlive | right |
20:21.00 | cr2 | i see only 0 and 2 |
20:21.12 | cr2 | 2 is headphone ? |
20:21.13 | goxboxlive | ? |
20:21.42 | cr2 | did you use headphone ? |
20:21.46 | goxboxlive | the videocall was without headphones, |
20:22.11 | goxboxlive | With the voicecall i had HP at forst attempt, and without on second attempt |
20:22.28 | cr2 | ok. that's right. |
20:23.27 | goxboxlive | But just so you know, the button on the HP didnt work so i had to use the one on the Universal at both attempts (voice call) |
20:24.15 | cr2 | yes, i don't see any button action too. |
20:24.17 | cr2 | [WCDMA] 1.13.00 |
20:24.35 | cr2 | well, nothing really interesting in the log. |
20:24.37 | goxboxlive | yes i am using a beta rom |
20:24.41 | goxboxlive | ok |
20:25.10 | cr2 | but the other modes are there for a reason... |
20:27.16 | goxboxlive | ok |
20:27.50 | goxboxlive | Lets do a summary of the status for the Universal: |
20:28.30 | goxboxlive | We need suspend/resume work bether. Especially keyboard and the g_ether driver. |
20:28.53 | goxboxlive | Also get rid of the screen flicker after resume. |
20:28.59 | cr2 | usb host power setup/resume/suspend should be checked. |
20:29.08 | cr2 | i don't have it btw. |
20:29.17 | cr2 | the flicker. |
20:30.04 | goxboxlive | realy |
20:30.30 | goxboxlive | i have it, but it is very little, but it's there. Have to look for it to see it thow. |
20:30.49 | cr2 | ok. |
20:31.10 | goxboxlive | - we have to get the pad working. |
20:32.04 | goxboxlive | In milan's keyboarddriver they where parallell to the arrows on the keyboars. Select was parallell to [enter] |
20:32.22 | goxboxlive | And they also resumed aftre suspend. |
20:34.01 | cr2 | now they will resume too. |
20:34.11 | goxboxlive | And some cosmetic things like the key led when that will be doable. I realy miss it when it's dark in the room. |
20:34.14 | cr2 | but they are on separate device. |
20:34.31 | cr2 | it's a general problem. |
20:34.49 | cr2 | and it should not be handled by the kernel. |
20:35.09 | goxboxlive | The pad where resuming before we changed the keyboard driver. |
20:35.24 | cr2 | i'll split the leds into two parts too. asic3 leds and other gpio leds. |
20:35.31 | goxboxlive | ok |
20:35.54 | cr2 | the pad don't really need the resume, it's just asic3 gpio. |
20:36.13 | goxboxlive | ok |
20:36.15 | cr2 | it's all mainly userspace problems. |
20:36.27 | cr2 | how opie should react to some events. |
20:36.39 | cr2 | and where does it get these events, |
20:36.50 | cr2 | and how does it send its events. |
20:37.00 | cr2 | the same applies to the phone buttons. |
20:37.20 | goxboxlive | ok, but i am talking about without opie running. I have never managed to suspend with opie running. I think there is some code in the odevice_htc.cpp that breaks the suspend. |
20:37.21 | cr2 | there is no other comparable device. |
20:38.11 | cr2 | there is some braindamage there in the suspend code, and i don't understand why. |
20:38.19 | goxboxlive | ok |
20:38.32 | cr2 | opie just calls system("apm --suspend") |
20:38.41 | goxboxlive | do you think we will have it ready before christmas (beside gprs). |
20:39.02 | goxboxlive | yes it does, but there are some delyas in it if you take a look at it. |
20:39.03 | cr2 | this can be debugged with printfs in opie. |
20:39.28 | cr2 | it's "our" driver, we can just remove the delay. |
20:40.02 | goxboxlive | void HTC::init(const QString& cpu_info) |
20:40.02 | goxboxlive | { |
20:40.02 | goxboxlive | <PROTECTED> |
20:40.02 | goxboxlive | <PROTECTED> |
20:40.02 | goxboxlive | <PROTECTED> |
20:40.03 | goxboxlive | <PROTECTED> |
20:40.30 | cr2 | comment it out ;) |
20:41.03 | goxboxlive | And if you take a look at this in the bottom of the file: bool HTC::suspend() http://handhelds.org/cgi-bin/cvsweb.cgi/~checkout~/opie/libopie2/opiecore/device/odevice_htc.cpp?rev=1.2&content-type=text/plain |
20:43.02 | BabelOued | oh i understand why suspend is too long !! |
20:44.59 | cr2 | <PROTECTED> |
20:45.13 | cr2 | that's what we really need ;) |
20:46.53 | cr2 | the led code is completely bogus |
20:48.47 | cr2 | if ( e.type != EV_SW ) return; |
20:48.50 | cr2 | hmm. |
20:50.00 | cr2 | m_embedix ? |
20:54.08 | goxboxlive | cr2: We also miss the /dev/input/eventx for the screen rotation |
20:54.55 | cr2 | it's on the asic3 buttons. with the pad. |
20:55.16 | goxboxlive | ok, but it is not listed in the interupts |
20:56.40 | goxboxlive | The pad is listed in interupts, but not screen rotation. |
20:57.17 | cr2 | then it may be switch vs. key |
20:58.27 | cr2 | and then we may need asic3-switches driver. the remaining question is: how do we gather all keys/switches into 1 event device like it was before. something to ask psokolovsky |
20:59.04 | goxboxlive | ok |
21:09.46 | cr2 | ok, it seems i've catched the bt-phone enable command. |
21:17.30 | goxboxlive | oh cool |
21:18.46 | cr2 | +CLCC syntax |
21:19.05 | lkcl | ok i found the charger for the BA whew. |
21:19.16 | cr2 | lkcl: ? |
21:19.19 | lkcl | yes dude |
21:19.43 | cr2 | charger on ba ? |
21:19.44 | lkcl | what cr2-dude? |
21:19.58 | lkcl | yes. cradle. in amongst the fricking mess that is my flat in holland. |
21:20.24 | cr2 | is the clcc syntax standard ? |
21:20.25 | cr2 | ok. |
21:20.26 | lkcl | i found the hima cradle last night no prb |
21:25.28 | cr2 | <id1>,<dir>,<stat>,<mode>,<empty>,<number>,<type> |
21:25.59 | cr2 | +CLCC: 7,0,3,0,0,"+49",145\r\n |
21:26.45 | *** join/#htc-linux doepiedoe (n=dopper@84-53-96-51.fiber.unet.nl) |
21:28.27 | cr2 | 0=MO originated, 3=alerting(MO call) 0=voice 0=non-multiparty number 145=type of address octet ??? |
21:32.45 | cr2 | Indicates the call identification number as described in |
21:32.45 | cr2 | subclause 4.5.5.1 of the GSM 02.30 document [19]; |
21:33.00 | cr2 | hmm. where do i get that ? |
21:36.46 | lkcl | http://www.ficora.fi/suomi/document/GFI_9804ed3.pdf |
21:38.24 | lkcl | http://pda.etsi.org/pda/home.asp?wki_id=aiRJwOR7EEKNTTOTcVwb |
21:38.33 | lkcl | pda.etsi.org - it's a free download. |
21:42.16 | cr2 | ok. |
21:42.23 | Speedy2 | Yo all. |
21:44.50 | lkcl | hiii speedy2< |
21:45.44 | Speedy2 | I need to ask, are there any standards or datasheets you guys are missing? |
21:48.54 | cr2 | "X" is the numbering (starting with 1) of the call given by the sequence of setting up or receiving the calls |
21:48.54 | cr2 | (active, held or waiting) as seen by the served subscriber. Calls hold their number until they are released. |
21:48.54 | cr2 | New calls take the lowest available number. |
21:49.31 | cr2 | hmm. does not look like a true statement on a htcuniversal. |
21:51.30 | cr2 | 002.599855-002.599867 write: '\x01\x06\x08\x02\x01\x00' |
21:51.39 | cr2 | 002.601153-002.601168 read: '\x04\x0f\x04\x00\x01\x06\x08' |
21:51.49 | cr2 | 002.806251-002.806279 write: 'AT@AUDIOSET=7,0,0,2\r' |
21:52.35 | cr2 | perl -e '{$val=0x0608; printf "0x%x 0x%x\n",$val>>10,$val&0x3ff}' |
21:52.47 | cr2 | 0x1 0x208 |
21:53.18 | cr2 | ./a.out Phone_Script212.bts |
21:53.32 | cr2 | ACTION_SEND_COMMAND: 0x01 0x08 0xfe 0x0e 0x08 0x02 0x01 0x01 0x01 0x01 0x10 0x00 0xff 0x00 0x10 0x10 0xff 0x00 |
21:53.51 | cr2 | <PROTECTED> |
21:54.02 | cr2 | 0x3f 0x208 |
21:54.12 | cr2 | hehe. dirty tricks. |
21:55.21 | cr2 | 0x3f is vendor-specific. ok. 0x208 command must do something with the phone. |
21:55.33 | cr2 | but 0x1 0x208 |
21:56.33 | cr2 | http://www.geocities.com/blue_prasso/bluetooth/hci_commands.htm |
21:56.43 | cr2 | Link Control Commands (OGF = 0x01) |
21:57.11 | cr2 | the last entry |
21:57.13 | cr2 | Write_Link_Policy_Settings 0x000D |
22:00.08 | cr2 | perl -e '{$val=0x0806; printf "0x%x 0x%x\n",$val>>10,$val&0x3ff}' |
22:00.18 | cr2 | typo. |
22:00.36 | cr2 | 0x2 0x6 |
22:00.57 | cr2 | HCI Policy Command (OGF=0x02) |
22:01.11 | cr2 | Exit_Park_Mode 0x0006 |
22:01.23 | cr2 | ok. |
22:11.05 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
22:21.22 | cr2 | something for your phone |
22:21.25 | cr2 | http://www.umts-tools.org |
22:27.16 | lkcl | has anyone actually ever got hh.org blueangel to compile??? |
22:27.45 | BabelOued | lkcl: yes |
22:27.58 | lkcl | then why are there so many errors?? |
22:29.00 | BabelOued | i take source from .18 and there is lot of error |
22:29.32 | BabelOued | an no working bt |
22:29.37 | BabelOued | but asylumed have made patch for tsc2200 |
22:30.03 | BabelOued | and me need to clean led class tdriver before send |
22:30.16 | BabelOued | and have a working bat class too |
22:30.32 | BabelOued | batt class structure is ok |
22:31.02 | cr2 | lkcl: are you using htcblueangel_defconfig ? |
22:31.23 | cr2 | i have compiled .19-hh0 with htcblueangel_defconfig |
22:31.30 | BabelOued | oh no/// |
22:31.37 | cr2 | didn#t test it though :) |
22:32.03 | cr2 | BabelOued: ? |
22:32.41 | BabelOued | i don 't use defconfig.... |
22:34.00 | cr2 | i wanted to be sure everything in CVS compiles. some drivers are simply omitted. |
22:34.12 | cr2 | because they are certainly broken. |
22:34.21 | BabelOued | ok |
22:36.02 | cr2 | the tsc2200 mess needs to be cleaned. afaik asylumed has done a lot in this direction. |
22:38.02 | lkcl | cr2: yes |
22:39.07 | lkcl | well people better warn me cos otherwise i'm likely to just plough through the whole lot :) |
22:39.33 | doepiedoe | [22:45] <Speedy2> I need to ask, are there any standards or datasheets you guys are missing? |
22:40.24 | doepiedoe | what was the name of that the flash chip? ;) |
22:41.26 | BabelOued | lkcl , cr2 you have all file here http://linuxbox2.free.fr/blueangel/2.6.19-hh/ |
22:41.57 | BabelOued | ds1wm, acx doesn t work and kp have some repetition problems |
22:43.21 | cr2 | BabelOued: thanks. |
22:43.26 | BabelOued | battery class have two subdrirectory Main Battery and Backup Battery |
22:43.45 | cr2 | lkcl: what spi data length is used ? |
22:43.52 | cr2 | 16bit ? |
22:44.45 | cr2 | the spi part can be replaced by a pxa2xx-spi slave code (if it's not 24bit), like pH5 has mostly done it for magician. |
22:48.11 | cr2 | BabelOued: #include <linux/soc/tsc2200.h> is missing. |
22:50.32 | BabelOued | cr2: done |
22:54.12 | Speedy2 | doepiedoe: Did you think of a part that you are lacking a datasheet for? |
22:58.39 | BabelOued | cr2: i v'e uploaded my defconfig file |
23:13.17 | scatterp | hi guys wonder if anyone could help me is there a way to get windows 2003se on my htc universal ? |
23:26.45 | doepiedoe | lol |
23:27.00 | doepiedoe | got XP on mine now |
23:27.19 | doepiedoe | it cannot be done ;) |
23:27.51 | doepiedoe | windows ce/mobile is specially written for a specific device, all binary stuff, not very compatible at all.... |
23:29.18 | *** join/#htc-linux rmoravcik (n=rmoravci@pc-3s0zt5w2e4y0vzmhnrzq3a21zqajzfw.users.student.utc.sk) |
23:32.58 | lamikr | hi |
23:38.40 | scatterp | hi |
23:38.58 | scatterp | hey lamikr do you think its possible to downgrade htcuniversal to win 2003se |
23:39.10 | scatterp | i found a rom editor that claims to be for doing the task |
23:44.16 | lamikr | scatterp: Sorry, I do not have any idea from that. I have not ever played with the rom files and I have only ipaq h6340. |
23:45.03 | scatterp | oh ok |
23:45.20 | scatterp | theres some guys messing with roms on the xda dev site |
23:45.28 | scatterp | wnder if there on freenode somewhere |
23:46.33 | scatterp | if there was a htc device with a 2003se rom and simular hardware it would be easyer i guess |
23:53.01 | lamikr | scatterp: Yes, the perfect hardware simulator would help a lot. |
23:53.36 | scatterp | well i can hope lol :) |
23:54.29 | lamikr | yes :-) |