| 01:04.26 | awelux | xanadux wiki: |
| 01:04.28 | awelux | Himalaya Memory Map |
| 01:04.28 | awelux | Again mostly based on HaRET and some on the bootloader. |
| 01:04.28 | awelux | physical RAM start: 0xA0000000, size 0x04000000 (128MB) |
| 01:04.35 | awelux | that's wrong isn't it? |
| 01:04.58 | awelux | 128Mb are 0x8000000 right? |
| 01:18.46 | kTomy | probably 4000000 words... |
| 01:29.21 | awelux | ah. maybe |
| 01:32.10 | awelux | Another question. To see if the kernel is booting or has reached a certain point. What is currently done on these HTC devices? Can you just toggle the gpio of the power or bluetoth LED to get a life sign? |
| 02:14.02 | *** join/#htc-blueangel dullard (n=jim@adsl-static-1-30.uklinux.net) |
| 08:09.41 | *** join/#htc-blueangel dullard (n=jim@adsl-static-1-30.uklinux.net) |
| 08:25.49 | *** join/#htc-blueangel awelux (n=awelux__@dslb-084-058-162-248.pools.arcor-ip.net) |
| 09:17.08 | kTomy | heve anybody compiled packages from OpenEmbedded ? |
| 09:39.56 | mndctrl | I'm currently setting up the oe build enviroment, so not yet, but soon ;) |
| 09:43.00 | kTomy | I've managed to do that, recompiled some packages, now compiling gomunicator, just wanted to know if there is any way to install compiled things in a fs |
| 09:43.30 | kTomy | i mean doing it automaticaly, not with cd,cp,cd. :-) |
| 09:45.45 | mndctrl | aren't there some ipkg pack-and-stamp application under OE? |
| 10:07.04 | *** join/#htc-blueangel rob_w (n=bob@p213.54.197.227.tisdip.tiscali.de) |
| 10:07.05 | *** mode/#htc-blueangel [+o rob_w] by ChanServ |
| 10:52.41 | *** join/#htc-blueangel iclem (n=iclem@iclem.net) |
| 10:53.48 | iclem | hi room |
| 10:55.21 | kTomy | Hello |
| 10:55.42 | iclem | ikTomy: when you bitbake gommunicator, it make an ipkg the deploy directory |
| 10:56.20 | iclem | or you can do a "bitbake gpe-image" |
| 10:56.48 | kTomy | aha |
| 10:57.27 | kTomy | i've seen ipk files :-) |
| 10:57.42 | iclem | good :) |
| 10:58.10 | iclem | awelux: have you managed to build and boot a kernel on your magician ? |
| 10:58.30 | kTomy | one more question, can I see in real-time kernel booting? (via usb) ? |
| 10:58.49 | kTomy | i mean kernel messages while booting |
| 10:59.18 | iclem | with serial yes, you can get early kernel messages |
| 11:00.21 | kTomy | does it work thru serival thru usb (usbserial module) ? |
| 11:00.43 | iclem | I don't know |
| 11:01.00 | iclem | never testedd |
| 11:01.37 | iclem | you can watch lcd too ;) |
| 11:02.16 | kTomy | that 6px font kills me... |
| 12:19.02 | awelux | and a last one: I get this message a lot include/asm/cpu-multi32.h:34: warning: type qualifiers ignored on function return typeI'm working on it |
| 12:19.07 | awelux | ops |
| 12:19.21 | awelux | I'm still getting some errors |
| 12:19.45 | cr2 | hi guys |
| 12:19.45 | awelux | drivers/video/vsfb.c:138: error: invalid lvalue in assignment |
| 12:19.48 | awelux | hi |
| 12:20.21 | cr2 | kTomy: why don't you change the font size in menuconfig ? |
| 12:20.26 | awelux | Trying not to compile fb support didn't work. So I guess I have to set the right values somewhere |
| 12:21.06 | cr2 | awelux: are you compiling for the magician ? |
| 12:21.13 | awelux | trying |
| 12:21.23 | cr2 | which kernel ??? |
| 12:21.48 | awelux | I've found the the hh2-2.6.12-ma1 branch |
| 12:22.10 | cr2 | hmm. interesting :) |
| 12:22.20 | awelux | And copied and renamed some files from himalaya. |
| 12:22.27 | awelux | The hh2-2.6.12-ma1 branch is empty |
| 12:22.41 | awelux | I mean there are no files for the magician |
| 12:22.44 | cr2 | but you need pxafb with right params probably. |
| 12:22.55 | awelux | just the hookes for the kernel config menus |
| 12:23.21 | awelux | Right now I need nothing but a led going on to tell me that I get into kernel code at all |
| 12:23.33 | awelux | And I need it to compile. |
| 12:23.41 | cr2 | which led ? |
| 12:24.46 | awelux | Any led ^^ |
| 12:25.29 | awelux | So far all I got was hret loading a blueangel kernel up to the penguin eyes changing. |
| 12:25.39 | cr2 | but then you need to know how to control them. |
| 12:25.48 | awelux | And getting goodby cruel world on the pc |
| 12:26.13 | cr2 | that's nothing :) it will always work. |
| 12:26.15 | awelux | I hoped I can just switch on the right GPIO of the processor |
| 12:26.38 | cr2 | heh. do you know which one? |
| 12:27.24 | awelux | theer was quite a lot of work done on the gpios of the magician already |
| 12:28.35 | cr2 | yes. but not the leds. i have even calculated the pxafb parameters. |
| 12:28.38 | awelux | hmm. I don't ^^ |
| 12:28.56 | awelux | I will try to get a blinking bluetooth led and watch |
| 12:33.27 | awelux | would it be easier to memcopy somthing into the FB area ? |
| 12:34.05 | cr2 | it is not that easy as it sounds. |
| 12:35.29 | cr2 | hmm. on magician. you can try, because everything is in the SRAM. |
| 12:36.20 | cr2 | don't compile in the fb stuff, and just write to fbmem. do you know where it is ? |
| 12:41.50 | awelux | I've seen the memory map on xanadux wiki |
| 12:41.52 | *** join/#htc-blueangel immolo (i=nekzqfc@cpc1-cosh1-4-0-cust126.cos2.cable.ntl.com) |
| 12:41.55 | awelux | so yes. |
| 12:44.12 | cr2 | if you have pm10a, then your fb starts at 0x5c000020, don 't touch the lower 0x20, these are for the dma descriptor. |
| 12:48.23 | awelux | ah. thanks. |
| 12:53.56 | *** join/#htc-blueangel iclem_ (n=clement@iclem.net) |
| 13:04.06 | *** join/#htc-blueangel awelux_ (n=awelux__@dslb-084-058-158-247.pools.arcor-ip.net) |
| 13:04.13 | awelux_ | firewall trouble. |
| 13:41.50 | *** join/#htc-blueangel awelux (n=awelux__@dslb-084-058-140-040.pools.arcor-ip.net) |
| 14:03.26 | awelux | question: does haret take snapshots of the gpio status or does it somehow log all changes? |
| 14:05.03 | awelux | and if it takes snapshots, wouldn't it be very usefull to have something lige wgpio <duration> [gpio list ...] to monitor just a few ports witth higher resolution? |
| 14:26.21 | cr2 | the resolution is already as good as possible, so wince really freezes. you can mask unneeded gpios with set igpio(x) 1, where x is the number |
| 14:31.03 | awelux | ah thanks |
| 14:36.32 | cr2 | hmm. there is -ma0 and -ma1 in cvs ? |
| 14:36.48 | awelux | yes. but no real content |
| 14:37.04 | awelux | except hooks for kernel config |
| 14:37.19 | *** join/#htc-blueangel iclem_ (n=clement@82.67.76.179) |
| 14:39.40 | cr2 | i can find the log with the pixclock params that JuNuKN sent me |
| 14:40.05 | cr2 | can you make a log ? just run "dump pxa27x"in haret. |
| 14:40.15 | awelux | ok |
| 14:40.30 | iclem_ | should precise : in "gnu-haret" |
| 14:40.41 | cr2 | yes. |
| 14:41.36 | cr2 | once i will get a working pxa27x back, i will extend the dump to other useful things like ssp, i2c, and so on. |
| 14:43.09 | awelux | HaRET(1)# dump pxa27x |
| 14:43.09 | awelux | line 1: No dumper pxa27x available, see HELP DUMP for a list |
| 14:43.09 | awelux | HaRET(2)# HELP DUMP |
| 14:43.09 | awelux | GPIO GPIO machinery state in a human-readable format. |
| 14:43.09 | awelux | GPIOST GPIO state suitable for include/asm/arch/xxx-init.h |
| 14:43.10 | awelux | CP(1) Value of 16 coprocessor registers (arg = coproc number) |
| 14:43.12 | awelux | MMU Virtual memory map (4Gb address space). |
| 14:43.16 | awelux | AC97(1) PXA AC97 ctrl (64x16-bit regs) (arg = ctrl number, 0..3). |
| 14:43.50 | awelux | I got the haret 0.3.6 from xanadux |
| 14:45.33 | cr2 | get the latest from http://jornada820.sf.net/files/haret |
| 14:45.52 | awelux | ah. thanks |
| 14:46.27 | awelux | is gnu haret another branch? or just a new version? |
| 14:46.34 | cr2 | you can also run "dump wince" |
| 14:46.50 | awelux | that's very recent this haret |
| 14:46.56 | cr2 | it is a heavy hacked version , that i compiled with gcc. |
| 14:47.10 | awelux | I will try it out. brb |
| 14:47.34 | cr2 | you don't need any m$ software to compile and run it. |
| 14:49.46 | awelux | ah. |
| 14:50.06 | awelux | I've severe trouble getting synce to work with my firewall. Might get disconnected soon |
| 14:52.32 | *** join/#htc-blueangel AndiM (n=andi@rhlx01.fht-esslingen.de) |
| 14:53.27 | AndiM | hi guys! could someone perhaps send me TNETW1100B WLAN firmware images from a current ROM image? |
| 14:54.07 | cr2 | why can't you extract it yourself ? they are all equal on all htc phones/pdas. |
| 14:54.17 | AndiM | http://www.handhelds.org/moin/moin.cgi/BlueAngel has some, but mentions "orig wince image", so there might be some newer ones |
| 14:54.22 | awelux | Welcome, this is GNU/HaRET running on WindowsCE v4.21 |
| 14:54.52 | cr2 | AndiM: i don't think so. |
| 14:55.00 | awelux | HaRET(3)# dump PXA27x |
| 14:55.00 | awelux | Run Mode clock: 104.00MHz (*8) |
| 14:55.00 | awelux | Turbo Mode clock: 416.00MHz (*4.0, inactive) |
| 14:55.00 | awelux | Memory clock: 104.00MHz (/1) |
| 14:55.00 | awelux | System bus clock: 104.00MHz |
| 14:55.01 | awelux | memclk_frequency_10khz: 10400 |
| 14:55.03 | awelux | lcdlck_frequency_10khz: 5200 |
| 14:55.05 | awelux | lcdlck_pixclock: 153846 pcd=4 lccr3=04400004 |
| 14:55.44 | iclem | beware of the flood kick ;) |
| 14:55.44 | AndiM | cr2: extracting is rather difficult, since I don't have win32 capability running here right now (.nbf is encrypted) |
| 14:56.35 | cr2 | there is a perl script, look into xda-dev wiki. |
| 14:56.56 | AndiM | ok, slightly reworded question ;): is Rev 1.10.7.K current WLAN firmware? |
| 14:57.06 | AndiM | cr2: well, see "encrypted" above... |
| 14:57.58 | cr2 | awelux: if you will dump lccr0,1,2 then you will have a working pxafb config. |
| 14:58.24 | cr2 | AndiM: it does _not_ matter. |
| 14:58.53 | AndiM | cr2: really? but I cannot recognzie FAT data in those .nbf images. |
| 14:59.46 | cr2 | there is not fat there. you decode nbf to nba. nba is fat only for the "extended" roms |
| 15:00.40 | cr2 | the kernel nba have their own structure, radio also its own. |
| 15:14.02 | *** join/#htc-blueangel awelux_ (n=awelux__@dslb-084-058-190-031.pools.arcor-ip.net) |
| 15:14.37 | awelux_ | I lost the connection about 15 minutes ago |
| 15:15.21 | cr2 | dump the lccr0,1,2 then you will have all the data for the pxafb config. |
| 15:15.34 | awelux_ | ah thanks |
| 15:16.18 | cr2 | wait. i have them all in a decoding script. |
| 15:16.40 | awelux_ | HaRET(1)# pd 0x44000000 24 |
| 15:16.40 | awelux_ | 44000000 | 04000081 08081cef 04040d3f 04400004 | ........?.....@. |
| 15:16.40 | awelux_ | 44000010 | 00000000 3f3f3f3f | ....???? |
| 15:16.40 | awelux_ | # |
| 15:16.43 | awelux_ | this way? ß |
| 15:17.00 | cr2 | yes. |
| 15:17.02 | AndiM | hmm, thanks. now I can decide whether I should investigate extraction more or whether I'm content with the current newly discovered firmware version. |
| 15:19.31 | cr2 | hsw: 8 elw: 9 blw: 9 vsw: 4 efw: 4 bfw: 4 pixclock: 153846 |
| 15:20.53 | AndiM | thanks for the help, have fun, bye! |
| 15:26.03 | *** part/#htc-blueangel AndiM (n=andi@rhlx01.fht-esslingen.de) |
| 15:32.41 | awelux_ | cr2, I've to remember this. thanks. Currently I'm still trying to collect the right files to compile a kernel at all. Maybe I should start with the blueangel or himalaya code and just edit for starters. |
| 15:33.10 | cr2 | start with aximx30 |
| 15:33.47 | cr2 | ba and hima are too complex and you don't need it. magician is much simplier. |
| 15:35.57 | awelux_ | that should help |
| 15:48.54 | awelux_ | the axim port is part of the current head of cvs Import of 2.6.12-hh2 from handhelds.org. But no changes in the lasst 4 month. Is it that stable or that unused ? |
| 15:54.03 | cr2 | you need to create two files: magician.c with the basic pxa stuff and magician_lcd.c with the pxafb init structure. then it should boot :) |
| 15:55.47 | cr2 | then you can take care of the mmc/sd driver. |
| 16:04.45 | awelux_ | that doesn't sound to hard ;) |
| 16:06.11 | cr2 | for IR you need some more gpio, and for usb too. |
| 16:11.38 | awelux_ | I'd be happy if something happens. |
| 16:12.03 | awelux_ | All this crosscompile and embedded kernel stuff is new |
| 16:12.49 | awelux_ | device drivers development should be very similar to device driver development for desktop then |
| 16:28.17 | awelux_ | the axim30x is "non functional" in current cvs and doesn't compile. |
| 16:29.36 | awelux_ | I might try oh well. I will try to commpile anything and come back |
| 16:36.33 | awelux_ | Then at least I will know that the errors are related to the new macine and not something else. |
| 17:18.15 | *** join/#htc-blueangel kTomy (n=root@86.104.199.190) |
| 19:08.19 | awelux_ | Finally I got an axim x3 based kernel to compile. |
| 19:09.14 | awelux_ | When I try to boot it it resets the connection and I'm back in wince with touchscreen disabled |
| 19:10.06 | awelux_ | I will now try to insert the machine specific data into the axim files |
| 19:17.37 | *** join/#htc-blueangel awelux__ (n=awelux__@dslb-084-058-111-134.pools.arcor-ip.net) |
| 19:41.35 | awelux__ | oh. I just noticed there are seperate configs for axim x3 and axim x30 |
| 19:57.07 | awelux__ | question. In the aximx30_lcd I have to gice the lccr0 (what is this btw) directly and not over the individual values. |
| 19:58.29 | awelux__ | what is the lccr0 of this result: pd 0x44000000 24 |
| 19:58.29 | awelux__ | <PROTECTED> |
| 20:02.37 | awelux__ | is it the first value? 04000081 ? |
| 20:14.59 | *** join/#htc-blueangel awelux_ (n=awelux__@dslb-084-058-185-050.pools.arcor-ip.net) |
| 20:15.41 | awelux_ | strange. my pppd for internet dies after a few minutes when I try to boot a kernel via hret |
| 20:15.44 | awelux_ | *haret |
| 21:12.56 | *** join/#htc-blueangel immolo (i=jvaxobrs@cpc1-cosh1-4-0-cust126.cos2.cable.ntl.com) |
| 21:26.37 | *** join/#htc-blueangel immolo (i=mgllsm@cpc1-cosh1-4-0-cust126.cos2.cable.ntl.com) |
| 21:34.26 | *** join/#htc-blueangel immolo (i=tqcyguz@cpc1-cosh1-4-0-cust126.cos2.cable.ntl.com) |
| 22:13.07 | awelux_ | does the gnu haret bootlinux command work? |
| 22:13.13 | awelux_ | I see this in the code: |
| 22:13.32 | awelux_ | <PROTECTED> |
| 22:13.32 | awelux_ | <PROTECTED> |
| 22:13.32 | awelux_ | <PROTECTED> |
| 22:13.32 | awelux_ | <PROTECTED> |
| 22:13.32 | awelux_ | <PROTECTED> |
| 22:13.33 | awelux_ | <PROTECTED> |
| 22:13.37 | awelux_ | <PROTECTED> |
| 22:13.39 | awelux_ | <PROTECTED> |
| 22:13.50 | awelux_ | the uart/return part isn't in original haret. |
| 22:24.00 | cr2 | hi awelux. i'm back. the boot code is not tested. |
| 22:24.45 | awelux_ | so I should use normal haret for this. |
| 22:25.06 | cr2 | for booting. yes. |
| 22:25.55 | awelux_ | I've read the irc logs. Seams like a few others are trying to get the magician up as well. |
| 22:26.35 | cr2 | pH5 a month ago. |
| 22:27.13 | awelux_ | And just a few weeks ago Junukn |
| 22:27.41 | awelux_ | Now I've got the kernel for the axim x30 to compile. |
| 22:27.51 | cr2 | i have asked him to do some tests. |
| 22:28.15 | cr2 | ok. then replace the pxafb settings with magician's |
| 22:28.29 | awelux_ | Now I would like to figure out if I reach the kernel init function or if I'm stuck before somehow. |
| 22:28.59 | awelux_ | I did edit the aximx30_lcd and entered the values you just gave me |
| 22:29.19 | cr2 | ok. then try to boot :) |
| 22:29.27 | awelux_ | I guess the lccr0 is the first value: 04000081 |
| 22:29.33 | cr2 | yes. |
| 22:29.36 | awelux_ | doesn't work :/ |
| 22:29.43 | cr2 | mtype ? |
| 22:29.53 | awelux_ | I gave the mtype for the axim x30 655 |
| 22:29.59 | cr2 | ok. |
| 22:30.23 | awelux_ | I was just reading the preloader code in haret to figure out how the boot loader works |
| 22:30.37 | cr2 | do you have a SIR device ? |
| 22:31.12 | awelux_ | If I get to the kernel somehow I can continue with the current crosscompiler. |
| 22:31.24 | awelux_ | Otherwise I would have to build haret somehow. |
| 22:31.32 | awelux_ | But I guess haret is quite reliable no? |
| 22:31.51 | awelux_ | I have a notebook with IR, |
| 22:31.59 | awelux_ | And a phone and a psion revo |
| 22:32.17 | cr2 | the bootlinux part is not very reliable. i wanted to make it better. |
| 22:32.41 | awelux_ | I couldn't find a gpio that korrelates with the bluetoth led |
| 22:32.47 | cr2 | i have managed to get the boot messages over SIR on universal. before it died :) |
| 22:33.03 | awelux_ | ah ic. |
| 22:33.17 | awelux_ | breaking the device would be a minor setback. |
| 22:33.22 | cr2 | do you know the IR gpio ? |
| 22:33.35 | awelux_ | I check the wiki |
| 22:33.44 | cr2 | pH5 told something about 83 or such, but i can't remember. |
| 22:34.18 | cr2 | it is not in wiki. i know because i have written the wiki ;) |
| 22:34.54 | awelux_ | hehe. I will watch haret wgpio then. brb |
| 22:36.06 | awelux_ | can't we just set a gpio to switch the device off or something like that? any reaction is fine. |
| 22:36.20 | awelux_ | The ir is hard to see |
| 22:37.04 | cr2 | mask everything that is in wiki |
| 22:37.19 | cr2 | add the igpio to startup.txt |
| 22:38.56 | awelux_ | ok. I was starting with that already. read it from the irc logs. |
| 22:44.42 | awelux_ | wiki: GPIO 115 sound related? I get 115 to 0 when I touch the touchscreen and to 1 when i realse it. |
| 22:48.34 | awelux_ | found something interesting: GPIO 103 might be the backlight on/off |
| 22:50.24 | cr2 | you mean 115 is the touchscreen interrupt ? |
| 22:51.22 | awelux_ | Looks like it. whenever I hit the touchscreen it gets low. |
| 22:52.45 | awelux_ | I have touchscreen sound off |
| 22:54.04 | cr2 | maybe. |
| 22:55.38 | awelux_ | I played with the backlight. I don't get gpio action there. except the 103 when backlight get's switched off. |
| 22:56.10 | awelux_ | Maybe I can toggle 103 in the kernel init function |
| 22:56.22 | cr2 | the backlight itself is probably on pwm channel. dump cken. |
| 22:56.34 | awelux_ | pwm ? |
| 22:56.56 | cr2 | pulse widht modulation. pxa27x has 4 pwm channels. |
| 22:57.14 | cr2 | universal uses pwm1 for backlight. |
| 22:57.20 | awelux_ | ah. I've to read the pxa27x specs |
| 22:57.24 | cr2 | the rest is unused. |
| 22:57.45 | awelux_ | dump cken dumps the pwm content? |
| 22:57.48 | awelux_ | or state` |
| 22:57.50 | awelux_ | ? |
| 22:58.21 | cr2 | cken is clock enable. pwm config is in a different address range. |
| 22:59.22 | *** join/#htc-blueangel JuNuKN (n=JuNuKN@Mc237.m.pppool.de) |
| 22:59.22 | awelux_ | I might lose connection again. brb |
| 22:59.41 | awelux_ | ah hi JuNuKN. The other magician user :) |
| 22:59.43 | cr2 | hi JuNuKN |
| 23:00.29 | JuNuKN | Hello everybody ... I read in Log, that you work on it ... very interesting. I will follow your actions (to learn ) |
| 23:01.54 | JuNuKN | awelux_ I am a user of magician and himalaya :o) ... at the moment magician |
| 23:03.01 | awelux_ | I'm learning too. |
| 23:03.19 | awelux_ | What is the difference between GPLR and GAFR in haret? |
| 23:03.27 | JuNuKN | No, you are doing ;o) |
| 23:04.40 | cr2 | gplr is level , gafr is alternate function. |
| 23:04.56 | cr2 | gafr changes very seldom. |
| 23:05.14 | awelux_ | so GAFR[23] changed to 2 means ? |
| 23:05.59 | awelux_ | I get a lot of GAFR on 23,24,25 after I switched on touch sound |
| 23:06.10 | cr2 | i think... it is ssp. sound output. |
| 23:06.35 | cr2 | "tap" sound probably. |
| 23:07.42 | awelux_ | <PROTECTED> |
| 23:08.37 | awelux_ | I mean 38 is contacts |
| 23:08.39 | cr2 | well, check all the buttons. |
| 23:08.46 | awelux_ | And 90 is calender |
| 23:14.10 | awelux_ | I'm adding the b uttons to the wiki |
| 23:14.38 | awelux_ | How do they control the status led of the device ? |
| 23:16.30 | cr2 | disassemble the nled dll :) |
| 23:17.02 | cr2 | try harethelper.exe. will your phone vibrate ? |
| 23:17.06 | awelux_ | ?!? why is 91 marked as touchscreen. |
| 23:17.12 | awelux_ | uh |
| 23:17.23 | awelux_ | It's camera button for me |
| 23:17.41 | awelux_ | hmm. I've the VPA compact |
| 23:17.44 | cr2 | there is a question mark there. |
| 23:18.18 | awelux_ | Which is not really the magician. But therefresh |
| 23:18.22 | awelux_ | refresh |
| 23:18.32 | awelux_ | Should be very very similar though |
| 23:19.03 | cr2 | replace. |
| 23:19.16 | awelux_ | ok I will |
| 23:19.17 | JuNuKN | i will crosscheck with my mda compact |
| 23:19.27 | awelux_ | thanks. that would hekp |
| 23:19.29 | awelux_ | help |
| 23:19.41 | awelux_ | switch off the sounds for keys and touchscreen |
| 23:19.48 | awelux_ | that will make it a lot easier |
| 23:20.39 | cr2 | also try harethelper.exe it will give you the vibra enable gpio. |
| 23:20.57 | JuNuKN | it is off .... but there are a lot of outputs .... I think i have to maSK |
| 23:22.15 | awelux_ | yes. at leasst 59 to 77 |
| 23:22.31 | cr2 | 58 |
| 23:22.41 | awelux_ | true ^^. |
| 23:23.15 | awelux_ | ok filled in all the buttons |
| 23:23.15 | JuNuKN | Camera-Button GPLR 103 and 116 ? |
| 23:23.21 | awelux_ | uh |
| 23:23.38 | awelux_ | maybe we need a new page for Refresh... |
| 23:23.47 | awelux_ | But it should be only one button |
| 23:24.03 | awelux_ | I mean only one GPLR per button |
| 23:24.07 | JuNuKN | Still havent maked |
| 23:24.22 | JuNuKN | masked |
| 23:27.13 | JuNuKN | Has someone again that page for long log posts ? |
| 23:27.37 | JuNuKN | binpaste ? |
| 23:28.03 | awelux_ | ah just a second |
| 23:28.32 | awelux_ | http://en.pastebin.ca/34616 <- this one ? |
| 23:28.37 | awelux_ | but it's not that long |
| 23:29.37 | JuNuKN | http://pastebin.com/540884 was three seconds with camera button and without masks |
| 23:31.27 | awelux_ | that fits |
| 23:31.30 | awelux_ | the 91 is there |
| 23:31.45 | cr2 | mask all cif_dd* they are useless. |
| 23:31.47 | JuNuKN | yes, but also a lot of others |
| 23:32.03 | cr2 | cif_* |
| 23:32.20 | awelux_ | what are the cif ports ? |
| 23:32.22 | JuNuKN | cr2 numbers like described in wiki ? |
| 23:32.42 | cr2 | yes, |
| 23:33.41 | cr2 | camera datat and frame clocks. |
| 23:33.57 | JuNuKN | OK, I have prepared a startup.txt with masks ... 58-77 and 32+16 109, 107,42 OK ? |
| 23:34.04 | cr2 | capture interface. |
| 23:34.19 | JuNuKN | from our last tests! |
| 23:34.21 | cr2 | mmc/sd is also known. |
| 23:34.24 | awelux_ | I've also added 20 and 21 |
| 23:34.44 | cr2 | 109-113 |
| 23:34.57 | cr2 | 117,118 |
| 23:35.04 | awelux_ | but known portsw that do nothing are not important to mask |
| 23:35.26 | cr2 | i2c does nothing? |
| 23:36.03 | awelux_ | no, not for me |
| 23:36.21 | JuNuKN | ok i will add 20,21 109-113 and 117,118 |
| 23:36.29 | cr2 | tell me the cken. |
| 23:36.36 | awelux_ | maybe because I've not even entered a phone code yet. |
| 23:36.47 | awelux_ | ok. I will try the dump cken |
| 23:36.58 | awelux_ | Might disconnect me though :) |
| 23:38.33 | awelux_ | when I enter a pin I get action on gplr 42/43 |
| 23:39.10 | cr2 | see htc_serial wiki page. |
| 23:39.22 | cr2 | btw, can you do gprs ? |
| 23:39.55 | JuNuKN | ok, i am prepared |
| 23:40.04 | cr2 | your gsm is on btuart, i.e. gpio 42/43. |
| 23:40.40 | cr2 | JuNuKN: is your haret on wifi ? |
| 23:41.26 | JuNuKN | yes ... as ever |
| 23:41.52 | cr2 | do you have an usb cable ? |
| 23:42.07 | JuNuKN | yes i have one (for magician ) |
| 23:42.36 | cr2 | do you have a "charging" cable ? |
| 23:42.40 | awelux_ | oh. I'm not sure about gprs |
| 23:43.05 | awelux_ | possible. But I don't have a gprs connection |
| 23:43.20 | cr2 | so look for the usb detect/power gpios. |
| 23:43.30 | JuNuKN | yes, USB cable, wich allows to charge and a usb-charging cable without connected PC |
| 23:43.34 | cr2 | awelux: does not matter. |
| 23:43.53 | cr2 | i was thinking about other phone. |
| 23:43.56 | awelux_ | ah. good idea cr2 (the usb detect) |
| 23:44.33 | awelux_ | when charge goes on: GPLR 27 -> 1 GPLR 30 -> 0 |
| 23:44.41 | cr2 | JuNuKN: run haret and plug in/out both cables. |
| 23:44.55 | awelux_ | charge off: gplr 27->0 |
| 23:45.04 | awelux_ | and then a few seconds later |
| 23:45.17 | awelux_ | the screen get's darker and gplr 30-> 1 |
| 23:45.28 | JuNuKN | 103 ? |
| 23:45.59 | cr2 | imho magician uses the usb otg pin for "power" detect. don't mix it with "charge enable". |
| 23:46.35 | JuNuKN | or 27 ? I will post it on pastebin |
| 23:46.36 | awelux_ | I check if it's the same if I plug in usb or charge cable |
| 23:46.52 | cr2 | the "charging" cable should pull at least two pins: usb and power. |
| 23:47.12 | cr2 | usb - only usb. |
| 23:47.23 | cr2 | so look for the difference between the cables. |
| 23:47.37 | JuNuKN | http://pastebin.com/540915 plugged in multiple times |
| 23:48.05 | awelux_ | using the charger it only activates pin30 |
| 23:48.19 | awelux_ | I think the delay is interesting though |
| 23:48.41 | awelux_ | I get a clear delay of a few seconds. |
| 23:49.01 | JuNuKN | first was with pc cable |
| 23:49.19 | cr2 | JuNuKN: mask 20 and 21. |
| 23:49.46 | cr2 | i see the 27 there in the log. |
| 23:49.54 | awelux_ | 30 -> 0 charging. 30->1 not charging |
| 23:50.33 | cr2 | you mean power present, or "charge enable" ? is your battery full charged ? |
| 23:50.34 | JuNuKN | http://pastebin.com/540920 was with my GPS-Mouse charger |
| 23:50.36 | awelux_ | at least you get the same pins. |
| 23:50.44 | JuNuKN | 103 seems to be backlight !? |
| 23:50.51 | awelux_ | no it's not fully charged |
| 23:51.02 | awelux_ | yes. 103 looks like backlight |
| 23:51.09 | awelux_ | for you too ? |
| 23:51.35 | cr2 | sound reasonable. |
| 23:51.50 | cr2 | test vibra :) |
| 23:51.59 | awelux_ | good idea |
| 23:52.07 | awelux_ | that would be a cool lifesign |
| 23:53.00 | cr2 | it should be on one of the pwm channels. the brightness is probably on another one. |
| 23:53.17 | JuNuKN | stupid me,- i forgot the 1 behind the breackets |
| 23:55.01 | awelux_ | pin 22 high is vibra on ^^ |
| 23:55.05 | cr2 | ssp1 - sound , ssp2 - touchscreen ? |
| 23:55.28 | JuNuKN | correct 22 1 is vibra on, and 22 = 0 is off |
| 23:57.07 | awelux_ | Here's the plan: Starting tomorrow I will try to get a gcc-arm-wince crosscompiler running. |
| 23:57.11 | JuNuKN | charging cable |
| 23:57.14 | JuNuKN | HaRET(389)# wgpio 15 |
| 23:57.14 | JuNuKN | GPLR[27] changed to 1 |
| 23:57.14 | JuNuKN | GPLR[103] changed to 1 |
| 23:57.14 | JuNuKN | GPLR[30] changed to 0 |
| 23:57.14 | JuNuKN | HaRET(390)# |
| 23:57.15 | awelux_ | Compile your gnu haret |
| 23:57.41 | cr2 | i see the pwm_out0 on gpio16, where is the pwm_out1 ? |
| 23:57.59 | awelux_ | and check if I can switch off backlight by toggeling gplr 103 and vibra with 22 |
| 23:58.01 | JuNuKN | 27 seems the plugin of the cable ... and maybe 30 is the enable line ? |
| 23:58.05 | cr2 | take the compiler at the VLC homepage. |
| 23:58.34 | cr2 | awelux: you can do it right now. |
| 23:58.47 | cr2 | i mean toggle the pins. |
| 23:58.52 | awelux_ | no, I've to work tomorrow ^^ |
| 23:58.53 | awelux_ | oh |
| 23:58.57 | awelux_ | speak up |
| 23:59.07 | awelux_ | is there a haret command ? |