| 00:05.41 | lkcl | AH HA! |
| 00:05.57 | lkcl | root@blueangel:~# echo -en '\002\026at+cpan=2\r\n\026\002' > /dev/ttyS2 |
| 00:05.58 | lkcl | root@blueangel:~# 0000060 \n 002 002 002 026 a 002 002 002 026 t + c p a n |
| 00:06.12 | lkcl | *CACKLE* |
| 00:07.00 | cr2 | use " not ' ? |
| 00:07.28 | cr2 | cpan ? creg |
| 00:08.15 | lkcl | root@blueangel:~# echo -en '\002\026at+creg=2\r\n026\002' > /dev/ttyS2 |
| 00:08.15 | lkcl | root@blueangel:~# 00000c0 g = 2 \r \r \n O K \r \n 002 002 002 026 a 002 |
| 00:08.15 | lkcl | 00000d0 002 002 026 t + c r e g = 2 \r \r \n O K |
| 00:08.20 | lkcl | ah HAHAHAHAHAAaaaa |
| 00:08.38 | lkcl | okay - it _is_ there... hmmm |
| 00:09.02 | cr2 | good :) |
| 00:10.04 | cr2 | one word. opie. |
| 00:10.10 | lkcl | hmmm... i need to set debug=4 in gomunicator source |
| 00:10.16 | lkcl | don't talk to me about opie. |
| 00:10.19 | lkcl | i _like_ opie. |
| 00:10.28 | lkcl | i just don't like damn amd64 grr |
| 00:10.37 | cr2 | we need a phone app. |
| 00:10.51 | cr2 | i don 't like damn 32bit programmerz. |
| 00:11.34 | lkcl | oh, oops. |
| 00:12.08 | lkcl | root@blueangel:~# cat /proc/cpuinfo |
| 00:12.09 | lkcl | Processor : XScale-PXA255 rev 6 (v5l) |
| 00:12.09 | lkcl | BogoMIPS : 397.31 |
| 00:12.09 | lkcl | Features : swp half thumb fastmult edsp |
| 00:12.10 | lkcl | ... |
| 00:12.16 | lkcl | Hardware : HTC Himalaya |
| 00:12.32 | cr2 | cat /proc/ioports |
| 00:12.37 | cr2 | cat /proc/iomem |
| 00:12.44 | cr2 | cat /proc/interrupts |
| 00:12.50 | lkcl | and... damn. |
| 00:12.57 | lkcl | cmd_inframes is set to FALSE in "unknown". |
| 00:13.10 | lkcl | i just need to make a couple of changes here... :) |
| 00:13.35 | cr2 | why is it PXA255 ??? |
| 00:14.04 | cr2 | if you are changing the gomunicator. then add the universal and magician. |
| 00:16.35 | lkcl | *grump*. all right then. |
| 00:16.38 | cr2 | do you know how to properly use flex/bison ? this "if(strcmp)" in gomunicator makes me sick... |
| 00:16.43 | lkcl | cos it is |
| 00:16.55 | cr2 | it is PXA26x |
| 00:16.57 | lkcl | not exactly... i _did_ do some flex/bison stuff - 12 years ago. |
| 00:17.20 | cr2 | i know only the basics... |
| 00:17.51 | cr2 | PXA263 to be exact. |
| 00:18.43 | lkcl | is it? oh :) |
| 00:18.51 | lkcl | that's nice |
| 00:21.15 | lkcl | haret _can_ do gpio changing, can't it? |
| 00:21.34 | cr2 | yes. |
| 00:21.38 | lkcl | individual bits set/unset. |
| 00:21.40 | lkcl | okay. |
| 00:22.05 | lkcl | i wanna try trashing things to e.g. turn off the power to the speaker :) |
| 00:22.07 | cr2 | it can do it for any memory address. |
| 00:22.30 | cr2 | and the registers _are_ memory mapped. |
| 00:22.46 | lkcl | yeh, i know - i was wondering if there were commands GPIOSET 34 0 |
| 00:23.03 | cr2 | not sure about the camera. |
| 00:23.07 | lkcl | i've seen a haret tool, i swear, which had some nice boxes for that. |
| 00:23.17 | cr2 | i'll look into the source |
| 00:24.01 | lkcl | i need to identify the speaker and mic GPIOs |
| 00:24.47 | cr2 | on asic3 ? |
| 00:25.24 | lkcl | asic3, gpio, wherever they are, i need to know. |
| 00:25.32 | lkcl | drat. asic3 you say? drat |
| 00:26.32 | lkcl | http://wiki.xda-developers.com/index.php?pagename=HimalayaGSM |
| 00:26.37 | lkcl | it was _awful_ :) |
| 00:29.03 | cr2 | if you are the first, it is always awful :) |
| 00:30.01 | lkcl | yes it appears to be on the damn asic3. |
| 00:31.05 | cr2 | i found onl one varBitSet function (igpio). probably you just need to read the reg, and then write 16bit with haret. |
| 00:33.27 | cr2 | they are somewhere on gpioa or gpiob http://wiki.xda-developers.com/index.php?pagename=HimalayaEGPIO |
| 00:35.54 | lkcl | yeh i saw. |
| 00:45.07 | cr2 | IR new. i can have a FIR console using the wince driver. now i need to make it work writing to stuart. hmm. px27x gpio... |
| 00:46.17 | iclem | A 15 and B 13 are triggered when i press start menu (which plays sound) |
| 00:47.28 | lkcl | ah HA. |
| 00:47.33 | lkcl | good man. |
| 00:47.45 | lkcl | B13 is going to be speaker (i guess) and A15 mic. |
| 00:48.12 | lkcl | hang on - this is GPIO or ASIC3 we're talking? |
| 00:48.27 | iclem | yes |
| 00:48.30 | cr2 | GPIO for IR. |
| 00:48.38 | iclem | ASIC3 |
| 00:49.07 | cr2 | you have choice between pxagpio and asic3gpio |
| 00:50.00 | lkcl | ack. |
| 00:50.49 | cr2 | iclem: do you have an external headset and/or bluetooth headset ? |
| 00:51.57 | iclem | i have the stock headset that plugs into the device |
| 00:52.27 | cr2 | does something change on asic3 when you do it ? |
| 00:52.48 | iclem | wait, i need to undock and to telnet from wince |
| 00:52.56 | iclem | mean install telnet & co |
| 00:54.18 | lkcl | enter pin!! |
| 00:54.52 | lkcl | hmmm... could not get security status... |
| 00:56.38 | cr2 | are the transactions logged into /tmp/gomunicator.log like on wince ? |
| 00:56.45 | lkcl | ah - iclem: GPIOB-13 is frontlight power on |
| 00:56.58 | lkcl | only if you recompile the code with "debug=4" |
| 00:58.54 | cr2 | hmm. it is a good idea to do it a default option for now. |
| 00:59.15 | iclem | frontlight, you mean lcd backlight ? |
| 01:00.56 | lkcl | ah. |
| 01:01.19 | lkcl | himalaya_asic.h |
| 01:01.23 | cr2 | isn't it a pwm ? |
| 01:01.39 | lkcl | says "GPIOB_FL_PWR_ON" (1<<13) /* frontlight power on */ |
| 01:01.56 | lkcl | and 1<<12 is built-in speaker on |
| 01:02.40 | lkcl | ah - no, GPIOB_FL_PWR_ON is definitely used in the himalaya_lcd.c code |
| 01:02.54 | lkcl | it's for powering up the LCD/ATI3200. |
| 01:03.14 | lkcl | sendCommand('AT+CPIN="0000" |
| 01:03.22 | lkcl | GPE-ERROR: can't attach default card mixer |
| 01:03.22 | lkcl | sendCommand('AT+CPIN="0000"') |
| 01:03.22 | lkcl | tryReadPhone(3) |
| 01:03.22 | lkcl | sel_res=0 |
| 01:03.22 | lkcl | tryReadphone return, timeout |
| 01:03.23 | lkcl | sendCommand('AT+CPIN?') |
| 01:03.25 | lkcl | tryReadPhone(4) |
| 01:03.27 | lkcl | sel_res=0 |
| 01:03.29 | lkcl | tryReadphone return, timeout |
| 01:03.33 | lkcl | oops. |
| 01:04.31 | cr2 | gpioa11 is asic3_pwm0 and gpioa12 is asic3_pwm1. cp15 says you can't watch them. then there are pxa_pwm0 and pxa_pwm1 ... |
| 01:05.21 | cr2 | lkcl: look into wince Atdbglog.0 for the right sequence. |
| 01:05.48 | lkcl | aw gawd. oh yes of course. |
| 01:11.01 | cr2 | we need a debug level for the at commands. like wince. then the comparisons are very easy. |
| 01:12.48 | lkcl | got them all. |
| 01:13.55 | cr2 | grep sendCommand is ok, but what about receivedFromgsm ? |
| 01:14.42 | lkcl | what happened was that AT+CFUN=1 returned an error. |
| 01:14.52 | lkcl | apparently this is "register with network" |
| 01:16.47 | iclem | cr2: on headset plug/unplug D10 then A8 |
| 01:17.27 | iclem | (these dumps are done with llange's haret, don't know if it is ok |
| 01:18.02 | cr2 | a guy on xda-dev asks about HTC apache. this is a pxa27x phone with gps. i have written he should run haret first. |
| 01:18.44 | cr2 | iclem: should be ok. i have my own. compiled with arm-wince-pe-gcc :) you can test it on himalaya. |
| 01:19.54 | iclem | so it's safe to update wiki with A 8 = headset ? |
| 01:20.28 | cr2 | put a question at the end if you are not sure. |
| 01:20.54 | iclem | where can your haret be found and what's new apart gcc ;) ? |
| 01:22.18 | cr2 | i need to fix the bugs first. then i will put it into cvs. it is not so user friendly with asic3, but simply can watch any memory address. |
| 01:26.42 | lkcl | any suggestions on which of the dozen or so AT commands are going to do the trick? |
| 01:27.07 | cr2 | iclem: wiki says D11 - EP (earphone) detect |
| 01:27.12 | cr2 | lkcl: ? |
| 01:28.09 | lkcl | yes? |
| 01:29.07 | lkcl | http://hands.com/~lkcl/himalaya/gsm_log.txt |
| 01:29.09 | lkcl | urk. |
| 01:30.00 | iclem | cr2: two are triggered on headset plug |
| 01:30.16 | lkcl | which ones? |
| 01:30.23 | iclem | maybe one for sound and others for buttons |
| 01:30.31 | iclem | D10 & D11 |
| 01:30.53 | iclem | A15 is triggered on action on headset red phone button |
| 01:31.02 | cr2 | do you have a button on the headset. |
| 01:31.03 | cr2 | ok. |
| 01:31.38 | iclem | green action is not reported |
| 01:32.44 | lkcl | off we go again.... |
| 01:32.54 | cr2 | CME ERROR: 11 |
| 01:32.58 | lkcl | must go sleep soon - too many late nights |
| 01:33.41 | lkcl | what does that one mean, you think? |
| 01:33.43 | cr2 | CME ERROR : 11. PIN code not entered (with + CMEE = 1 mode). |
| 01:33.51 | iclem | A15 is also device red phone button |
| 01:34.12 | cr2 | i will go asleep too. |
| 01:34.21 | lkcl | it means pin code not entered yep :) |
| 01:34.28 | lkcl | hey, you using google, too? :) |
| 01:34.32 | cr2 | :))) |
| 01:34.53 | cr2 | it is the fastest way. |
| 01:34.57 | lkcl | ack |
| 01:35.05 | lkcl | okay. back up. |
| 01:35.25 | iclem | going to bed |
| 01:35.31 | iclem | good night |
| 01:35.38 | lkcl | night iclem |
| 01:39.37 | lkcl | oops - sound not too hot... |
| 01:40.40 | lkcl | i just gone and buggered the sound on my laptop! |
| 01:41.16 | cr2 | bad for you. |
| 01:41.37 | cr2 | i think it's enough for today. good night! |
| 01:41.48 | lkcl | okay |
| 01:41.50 | lkcl | night dude. |
| 07:22.44 | *** join/#htc-blueangel dave (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 07:25.49 | *** join/#htc-blueangel JuNuKN (n=JuNuKN@Mf8b5.m.pppool.de) |
| 07:42.47 | JuNuKN | Someone arround, who can reset our bot to completet the logs for the next days ? |
| 07:49.55 | JuNuKN | botmail for cr2 Hello cr2 ... as I remember you have Op status ... The logs of our bot a very incompltete all interesting details and progresses are missing of the last days. May you be able to correct the problem with the bot ? Maybe restart him or so ? Thanks in advance ... I don't want to miss the great things, that happen till the Himalaya is hacked ;o) |
| 07:50.41 | JuNuKN | botsmail for cr2 Hello cr2 ... as I remember you have Op status ... The logs of our bot a very incompltete all interesting details and progresses are missing of the last days. May you be able to correct the problem with the bot ? Maybe restart him or so ? Thanks in advance ... I don't want to miss the great things, that happen till the Himalaya is hacked ;o) |
| 07:50.57 | JuNuKN | ~botmail for cr2 Hello cr2 ... as I remember you have Op status ... The logs of our bot a very incompltete all interesting details and progresses are missing of the last days. May you be able to correct the problem with the bot ? Maybe restart him or so ? Thanks in advance ... I don't want to miss the great things, that happen till the Himalaya is hacked ;o) |
| 07:51.07 | JuNuKN | grrrrrr |
| 07:51.32 | JuNuKN | OK now it worked to send the mail ... |
| 08:24.57 | *** join/#htc-blueangel rob_w-cgi (n=txuser@dd1010.kasserver.com) |
| 08:24.57 | *** mode/#htc-blueangel [+o rob_w-cgi] by ChanServ |
| 08:25.44 | JuNuKN | rob_w-cgi Do you know, that the logs from our bot are very incomplete ? |
| 08:27.49 | rob_w-cgi | ~massacre apt for beeing off line for many minutes |
| 08:27.50 | apt | ACTION sets seeds of discontent and difference among the apt for beeing off line for many minutes; years later two factions have formed; history will take its course |
| 08:28.21 | rob_w-cgi | sorry for that .. |
| 08:28.50 | rob_w-cgi | this bot is still generally maintained by its "creator" |
| 08:29.36 | JuNuKN | and who is it ? can you inform him ? |
| 08:34.34 | JuNuKN | ~botmail for cr2 If I am remembering correct, you thought on replacing WinCE compltetely ... Therefore I found a interresting link, which enblaes mto create a second stage bootloader in the extendend rom http://wiki.xda-developers.com/index.php?pagename=HimalayaFileFormats HimaClearJumpCode ... maybe it is from help ?! |
| 08:41.31 | *** join/#htc-blueangel dave (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 09:31.22 | rob_w-cgi | great ,, your link times out JuNuKN |
| 09:31.39 | rob_w-cgi | ..but that should be me proxy`S fault |
| 09:43.47 | rob_w-cgi | cp15 was using that knowhow to replace the autoexe.bat or using its standard links |
| 10:03.19 | *** join/#htc-blueangel iclem (n=clement@iclem.net) |
| 10:16.15 | rob_w-cgi | *builds new gomunicator build with himalaya changes |
| 11:14.50 | rob_w-cgi | ~botmail for lamikr hey dude , wanna show up on #htc-blueangel to report your gomunicator test on hp6315 , thanks |
| 11:44.20 | *** join/#htc-blueangel rob_w-cgi (n=txuser@dd1010.kasserver.com) |
| 11:44.20 | *** mode/#htc-blueangel [+o rob_w-cgi] by ChanServ |
| 11:46.20 | *** join/#htc-blueangel eme (n=bosty@BSN-165-118-81.dial-up.dsl.siol.net) |
| 11:46.28 | lkcl | heya folks |
| 11:46.35 | eme | hi room |
| 12:10.43 | iclem | hi |
| 12:11.30 | lkcl | heya iclem, hi eme. |
| 12:11.48 | lkcl | i am wasted, whee |
| 12:12.00 | iclem | "another four weeks, and the charger is being successfully switched on when the device is plugged in to the USB" |
| 12:12.09 | iclem | hope it will not take me so long time ;) |
| 12:12.49 | iclem | nice article |
| 12:13.56 | lkcl | i might have found it - take a look in the himalaya gpio and egpio, there's one bit which does charger. |
| 12:14.06 | lkcl | presumably it's been disabled. |
| 12:14.27 | lkcl | i might have added some code that switches it back on - i don't know |
| 12:14.30 | lkcl | thanks. |
| 12:26.27 | lkcl | has anybody managed a bitbake gpe-image recently? i've been trying for four days, now. |
| 12:45.49 | *** join/#htc-blueangel rob_w-cgi (n=txuser@dd1010.kasserver.com) |
| 12:45.49 | *** mode/#htc-blueangel [+o rob_w-cgi] by ChanServ |
| 12:46.56 | *** join/#htc-blueangel pH5 (n=ph5@p54865F2B.dip.t-dialin.net) |
| 12:47.15 | rob_w-cgi | re on SeaMonkey |
| 12:48.29 | rob_w-cgi | welcom pH15 |
| 12:48.57 | pH5 | hi rob_w-cgi |
| 13:03.50 | *** join/#htc-blueangel geers (n=DevzMan@c51008F31.inet.catch.no) |
| 13:16.39 | cr2 | hi guys |
| 13:17.53 | cr2 | pH5: i have managed to compile haret with gcc. will be hunting the pxa27x gpio bugs today in the evening. |
| 13:17.58 | rob_w-cgi | , there updated some wiki and homepages |
| 13:18.56 | cr2 | rob_w: lkcl told be that at+creg=2 works on himalaya. |
| 13:20.03 | rob_w-cgi | sounds good then cr2 , eh ? |
| 13:21.26 | cr2 | yes. add the location tab to gomunicator :) |
| 13:21.59 | rob_w-cgi | so tell me more about that ... what will it provide and tell us , how can we leverage ß |
| 13:22.37 | rob_w-cgi | also tabs might be a good idea .. *grumble* |
| 13:23.35 | rob_w-cgi | idid not touch the gomunicator source for long time now ,, but i give it a go soon with more simple ui features ..that might be a candidate |
| 13:24.11 | lkcl | yeh, it work. i'm still trying to get the phone to actually speak to me. |
| 13:24.24 | lkcl | it might not be working because sound isn't up, i don't know and can't tell. |
| 13:24.44 | rob_w-cgi | lkcl .. wanna provide me again with your url ( if you did upload your current ba kernel ) |
| 13:24.52 | cr2 | rob_w: http://www.nobbi.com/atgsm.htm |
| 13:27.19 | rob_w-cgi | cr2 ah |
| 13:27.34 | lkcl | ba no, himalaya, yes, rob. |
| 13:28.53 | rob_w-cgi | lkcl ah , so your resume works on hima ! not a ba ? |
| 13:29.12 | cr2 | it will be also good not to use gtk-specific things in non-gui gomunicator files. |
| 13:30.35 | lkcl | no, as in, i got back onto the himalaya for a couple of days |
| 13:30.39 | pH5 | cr2, that's great! can you send me a patch against hx4700 haret? |
| 13:30.57 | lkcl | yeh, cr2: i'd like to see the damn thing ported to qt, i _have_ gnome/gtk. |
| 13:31.00 | lkcl | s/have/hate |
| 13:32.49 | rob_w-cgi | lkcl .. hence the name it is targeted to gpe gtk .. otherwise we need to fork a qomunicator , right ? |
| 13:33.09 | cr2 | lkcl: we should be toolkit-agnostic. i also have my preferences, but do not really hate gtk. X is always good :) |
| 13:33.37 | rob_w-cgi | * assignes lkcl tobe chief qt porter to gomunicator --- but split the cvs or so |
| 13:34.56 | cr2 | we can have both. the qomunicator gui is the easiest thing to do. alsa vs. oss is more troublesome. |
| 13:35.11 | rob_w-cgi | but from what i heard opie will die soon |
| 13:35.55 | cr2 | pH5: the changes are rather big. i can send you the complete tree. |
| 13:36.15 | cr2 | rob_w: that's what suse wants us to believe. |
| 13:39.27 | rob_w-cgi | oops |
| 13:41.40 | cr2 | everybody knows that qt is better on technical merits, but the commercial developers hate it ;) on a machine with 128MB RAM i don 't mind running plain qt on top of X. the qt-embedded code can be easily ported over. |
| 13:42.10 | pH5 | cr2: that's cool, too. can you put it up somewhere so I can http get it? |
| 13:45.49 | cr2 | wait a moment. |
| 13:53.09 | pH5 | no hurry |
| 13:54.10 | *** join/#htc-blueangel dave (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 13:56.47 | cr2 | http://jornada820.sourceforge.net/files/haret-gnu.tar.bz2 |
| 13:57.04 | pH5 | cr2, thanks |
| 14:00.06 | cr2 | i have merged the changes of llange, and broken some code. let me know about the bugs. |
| 14:00.47 | cr2 | there are also some new commands. |
| 14:01.44 | pH5 | shouldn't we try to port this to 0.3.6 and get it into cvs? |
| 14:03.18 | cr2 | run diff and you will see if it is worth it. i have a list of bugs to iron out first, before putting the code into cvs. |
| 14:03.53 | pH5 | ok |
| 14:06.31 | cr2 | we also need a harethelper program, that can be run simultaneously with haret. it will on request open/close devices. call ioctls, powerup/powerdown them. |
| 14:07.44 | cr2 | i will contact itsme from xda-dev about the itsutils code. can be useful too, for ril/vibra/leds/DoC/SD. |
| 14:22.34 | rob_w-cgi | cr2 what are those itsutils ? |
| 14:23.49 | *** join/#htc-blueangel dave (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 14:26.30 | lkcl | how are the words dumped from pd? |
| 14:26.42 | lkcl | they're dumped as 4 32-bit words, aren't they. |
| 14:27.58 | cr2 | lkcl: yes |
| 14:28.08 | cr2 | rob_w: http://www.xs4all.nl/~itsme/projects/xda/tools.html |
| 14:28.57 | lkcl | okay. |
| 14:29.18 | lkcl | HaRET(8)# pd 0x0d800100 16 |
| 14:29.18 | lkcl | 0d800100 | 00ffffff 00ffffff 0098af98 00000000 | ................ |
| 14:29.19 | lkcl | HaRET(9)# pd 0x0d800100 16 |
| 14:29.19 | lkcl | 0d800100 | 00ffffff 00ffffff 00980f98 00000000 | ................ |
| 14:29.25 | lkcl | first line: in a phone call |
| 14:29.30 | lkcl | second line: not in a phone call. |
| 14:30.15 | lkcl | _but_... |
| 14:30.17 | lkcl | HaRET(11)# pd 0x0d800200 16 |
| 14:30.17 | lkcl | 0d800200 | 01bf01bf 01870187 3f04ff04 3e40fe40 | ...........?@.@> |
| 14:30.17 | lkcl | HaRET(12)# pd 0x0d800200 16 |
| 14:30.17 | lkcl | 0d800200 | 01bf01bf 01870187 3e04fe04 3e40fe40 | ...........>@.@> |
| 14:30.17 | lkcl | HaRET(13)# |
| 14:30.35 | lkcl | first line in a phone call; second line _not_ in a phone call. |
| 14:31.38 | cr2 | what register is that... 0 2 4 6 8 10 12 14 16 |
| 14:31.47 | lkcl | so. phone call: GPIOC8=1, GPIOB15=1, GPIOB13=1 |
| 14:31.56 | lkcl | not phone call: all those are cleared. |
| 14:32.07 | lkcl | let me check D... |
| 14:32.16 | cr2 | the gpio status is at +30 on hima |
| 14:32.35 | lkcl | no change on D |
| 14:33.36 | lkcl | sorry - you're right. it's GPIOB15=1, GPIOB13=1, GPIOC8 _triggertype_ = 1 |
| 14:35.39 | cr2 | use the binary of llange. it is user-friendly :) |
| 14:35.50 | lkcl | hmmm, i still have sound playing, though... worth flipping those bits over anyway, just to see what happens. |
| 14:36.46 | rob_w-cgi | mighty lkcl .. might yours wanna help on the resume thing on ba ? any hint , test suggestion is welcome |
| 14:37.09 | lkcl | compile up the standard kernel out of cvs. do not modify it. and don't call me mighty, again :) |
| 14:37.31 | lkcl | it works fine on an MDA III (board revision 0x5) |
| 14:37.36 | rob_w-cgi | so that worked for you ? |
| 14:37.39 | lkcl | YES! |
| 14:38.27 | rob_w-cgi | hmm could you load up that kernel somewhere so i can pin down my problem .. so it might be related to a loaded modules ( cause i do load most of them ) |
| 14:38.31 | cr2 | imho you can do 'pfh 0x0d80.... 1 (something|0x0100)' |
| 14:38.43 | cr2 | to set/clean the bit |
| 14:40.07 | lkcl | i'm in the middle of trying to track down these bits for sound, i need to be out of here by 4pm, and i would need to go double-check it, and also tar up the modules. |
| 14:40.22 | lkcl | in other words, i'm pushed for time, and would rather not - not right now. |
| 14:40.31 | lkcl | sorry. |
| 14:40.49 | lkcl | i've got to be off for a day or two so want to focus on stuff. |
| 14:41.40 | rob_w-cgi | sure thing .. |
| 14:41.45 | lkcl | thanks. |
| 14:42.06 | rob_w-cgi | i will do test on latest kernel without loading any more |
| 14:42.10 | rob_w-cgi | modules |
| 14:42.34 | lkcl | no - you _do_ need to load blueangel_suspend. |
| 14:42.44 | rob_w-cgi | yep , beside that one |
| 14:42.51 | lkcl | ack. |
| 14:43.09 | rob_w-cgi | did you had any other loaded ? i guess touchscreen u had , right ? |
| 14:44.39 | lkcl | yes - everything that makes gpe/familiar useable. |
| 14:44.53 | lkcl | exactly the gpe that i had build 10 or so days ago. |
| 14:45.16 | rob_w-cgi | i see , so thanks |
| 14:49.04 | rob_w-cgi | ARRRGG i formatted my sd card fat .. |
| 14:52.19 | lkcl | ah joy. |
| 15:08.48 | lkcl | uhhhnn.... slashdot advance warning... |
| 15:09.15 | *** join/#htc-blueangel iclem_ (n=clement@iclem.net) |
| 15:10.16 | *** join/#htc-blueangel eme (n=bosty@BSN-165-118-81.dial-up.dsl.siol.net) |
| 15:10.34 | cr2 | lkcl: who will be slashdotted ? |
| 15:11.01 | eme | hi wonderfull people |
| 15:11.19 | lkcl | heya eme. |
| 15:11.23 | lkcl | uhnnn... us, probably. |
| 15:11.48 | lkcl | _just_ as i have to go out at 4pm :) |
| 15:12.03 | lkcl | lucky i got a phone with GPRS and a web browser, then, innit? :) |
| 15:12.24 | rob_w-cgi | cr2 we |
| 15:13.51 | cr2 | duck and cover :) |
| 15:15.53 | rob_w-cgi | lkcl when are you firing ? |
| 15:15.55 | lkcl | one story every 20 mins, and rick from linuxdevices says it's in the pipeline somewhere... |
| 15:16.02 | lkcl | *BANG* |
| 15:16.17 | lkcl | it's all rick of linuxdevice's fault, don't look at me! |
| 15:16.38 | rob_w-cgi | lkcl will we have also an article there ? |
| 15:17.14 | cr2 | rob_w: there is an article already. |
| 15:17.22 | rob_w-cgi | ah |
| 15:17.51 | lkcl | whew. we're safe for another 20 mins. |
| 15:17.57 | lkcl | http://linuxdevices.com |
| 15:19.23 | cr2 | After two years, at least one of HTC's mobile phones -- the Blue Angel -- is making and receiving phone calls. |
| 15:21.48 | rob_w-cgi | hehe blurry image lkcl ... now we know your face !! |
| 15:23.52 | cr2 | two years != two years of active development... that's the problem. taking a note for the universal :) |
| 15:24.33 | rob_w-cgi | heeh ,, tobad that you didnt mention the chat here directly and/or the handhelds.org wiki |
| 15:24.55 | rob_w-cgi | that will dump away the most dumb users ( which are not finding the chat or wiki |
| 15:29.15 | *** join/#htc-blueangel rob_w-cgi-2 (n=txuser@dd1010.kasserver.com) |
| 15:36.21 | eme | I see my phone on linuxdevices ;) |
| 15:36.57 | *** join/#htc-blueangel amgad (n=amgadpas@82.201.234.20) |
| 15:58.19 | rob_w-cgi | ahh back to normal |
| 16:03.04 | *** join/#htc-blueangel dave (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 16:04.22 | rob_w-cgi | <PROTECTED> |
| 16:08.38 | lkcl | http://digg.com/linux_unix/Hacking_Linux_onto_HTC_s_smartphones |
| 16:09.46 | lkcl | ok. i might have misunderstood rick's email - but he's having fun cross-posting to as many news sites as he can find |
| 16:10.21 | Funklord | is this project meant to go commercial now? |
| 16:10.28 | lkcl | naah, Funklord :) |
| 16:10.50 | lkcl | no, just splattered all over a few sites just for fun. |
| 16:11.08 | Funklord | heh, hope htc peeps don't read it |
| 16:11.35 | Funklord | they'll start making future hardware annoying with lock in schemes |
| 16:12.30 | rob_w-cgi | hmm i am still stuck on resume .. now latetest kernel and as good as no hardware module beside suspend |
| 16:13.06 | lkcl | http://www.linux-watch.com/news/index.html |
| 16:13.23 | lkcl | oh i hope the HTC people _do_ read it! |
| 16:13.50 | cr2 | lol. Linux hackers have successfully replaced Windows CE on several of HTC's popular mobile phones. |
| 16:14.14 | lkcl | rob, when i get back i'll do some blueangel hacking. |
| 16:14.27 | lkcl | i've been trying for days to build gpe-image |
| 16:15.32 | cr2 | lkcl: we really need an automated build script... |
| 16:16.30 | Funklord | echo everything you do in to a file.. sort it later.. |
| 16:16.57 | lkcl | one already exists - it's just faulty at tme moment, cr2. |
| 16:17.47 | rob_w-cgi | hehe now my matchbox bar is flickering like hot flickering .. |
| 16:20.55 | eme | is suspend working with kernel form xda-dev? I see it is different like on hh.com. so, which one should I us on ba please? |
| 16:21.20 | lkcl | yes it is working - _if_ you have an MDA III (board id 0x5). |
| 16:21.29 | rob_w-cgi | *grrrrr |
| 16:21.29 | lkcl | if you have a board id 0x6 then no. |
| 16:21.36 | lkcl | yeh, i know, rob. |
| 16:21.41 | rob_w-cgi | execpt for ME |
| 16:21.45 | eme | thing is 0x6 :( |
| 16:22.03 | eme | thanks ikcl |
| 16:22.14 | lkcl | well then you are SOL unless someone gets me an XDA IIs. sorry! |
| 16:22.31 | lkcl | damn _really_ gotta go. late. |
| 16:22.36 | rob_w-cgi | cu |
| 16:26.40 | *** join/#htc-blueangel dave (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 16:44.11 | *** join/#htc-blueangel dave (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 16:45.14 | *** join/#htc-blueangel pH5 (n=ph5@e178238069.adsl.alicedsl.de) |
| 16:55.58 | rob_w-cgi | this is really crap... |
| 16:56.11 | rob_w-cgi | maybe i am using a buggy Xfbdev ? |
| 17:13.37 | *** join/#htc-blueangel JuNuKN (n=JuNuKN@Mf8b5.m.pppool.de) |
| 17:14.00 | *** join/#htc-blueangel _buz (n=buz@80-218-105-74.dclient.hispeed.ch) |
| 17:14.08 | _buz | #htc-wizard |
| 17:14.12 | _buz | oops |
| 17:18.33 | JuNuKN | ~botmail read |
| 17:30.48 | *** join/#htc-blueangel amgad (n=amgadpas@82.201.234.20) |
| 17:33.57 | *** join/#htc-blueangel dave (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 18:57.39 | *** join/#htc-blueangel rob_w (n=bob@p85.212.151.229.tisdip.tiscali.de) |
| 18:57.39 | *** mode/#htc-blueangel [+o rob_w] by ChanServ |
| 19:38.29 | JuNuKN | Hello cr2 and iclem , is there something new for himalaya ? Maybe a GPE image for tests ? |
| 19:38.54 | JuNuKN | It is extremely silent at the moment |
| 19:46.35 | cr2 | hi JuNuKN. |
| 19:46.56 | JuNuKN | Hello cr2 |
| 19:47.39 | cr2 | YES! got universal to boot with the IR console. wow :) |
| 19:48.12 | JuNuKN | Great ... That is really a dream device ... 640x480 ... but still to expensive |
| 19:49.12 | JuNuKN | I have read, that it may be very simular to the motorola devices, where the sourcecode is available ,,,, sounds as a easier job than hima !? |
| 19:49.30 | cr2 | rob_w: why does the initrd hang at starting portmap ? i remember some discussion about it for BA. |
| 19:50.30 | cr2 | the cpu & camera are the same. camera is not so easy on hima/BA. |
| 19:51.14 | cr2 | universal is expensive, but for poor sods like me with no life it is ok ;) |
| 19:51.40 | JuNuKN | ... The camera on Hima is very bad ... from my point of view you can forget it ... maybe the last feature on the list |
| 19:52.31 | cr2 | the ati video capture port is the main problem. |
| 19:52.40 | JuNuKN | Really needed things are Sound and Bluetotth ... the rest is joke stuff ;o) |
| 19:53.09 | cr2 | sound will be solved. bt is on asic5 ? |
| 19:53.12 | JuNuKN | .. on the hima ... on Universal in any case the WLAN is a must |
| 19:53.39 | cr2 | sound on universal is the same chip as on hx4700. |
| 19:53.44 | JuNuKN | I am not shure, what on Asic5 is , read that the backpack is on it ... |
| 19:54.30 | cr2 | CF backpack, probably video. the bt driver refers to asic5. |
| 19:55.16 | cr2 | wlan on universal is the same as on BA and hx4700. |
| 20:00.53 | JuNuKN | And there it works !? |
| 20:01.01 | cr2 | no. |
| 20:01.05 | cr2 | not yet. |
| 20:03.22 | JuNuKN | I thought it runs with the closed source driver ? |
| 20:04.26 | JuNuKN | That sounds bad for BT on hima ! Doesn't it ? |
| 20:04.44 | cr2 | on sharp zaurus. with sdio on pxa2xx. pH5 can try it on his magician. |
| 20:04.56 | cr2 | sounds more complicated as on BA. |
| 20:05.04 | cr2 | than on BA. |
| 20:05.35 | cr2 | no idea about the universal. it can be even more complicated than on hima. |
| 20:05.45 | cr2 | do you have bt hardware ? |
| 20:06.23 | JuNuKN | Yes abluetooth GPS mouse and of cource my laptop ... but I like to sync with IR more likely |
| 20:06.50 | JuNuKN | ... bringing kids to bed will come back later ... |
| 20:08.32 | pH5 | cr2: you got an IR console on the universal? that's great! what's the secret? |
| 20:10.10 | cr2 | the gpio. |
| 20:10.31 | cr2 | i run without the frambuffer. |
| 20:10.49 | rob_w | re |
| 20:10.53 | cr2 | posting the bootlog to wiki now. |
| 20:11.06 | cr2 | rob_w: what about the portmap ? |
| 20:11.21 | rob_w | let me think |
| 20:11.48 | rob_w | actually u should be able to ssh into it ?!? |
| 20:12.12 | rob_w | ur mmc might have not booted |
| 20:12.54 | cr2 | i must switch it off ASAP, because the LED flashlight is BURNING :( |
| 20:13.12 | cr2 | no mmc, because the driver is BA-specific, but i can patch it. |
| 20:13.58 | rob_w | cr2, what u mean ? |
| 20:15.38 | cr2 | universal has a flashlight LED. it is switched on as the kernel boots. probably it is a bug in the asic3 gpio init or such. it is probably not designed to work continuously... |
| 20:16.10 | rob_w | oh flashlight ,, from the photo |
| 20:16.50 | cr2 | from the main 1.3 Mpix camera. it has two of then. |
| 20:17.31 | cr2 | Linux version 2.6.12-hh2-xda0-un0 |
| 20:17.33 | cr2 | CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE) |
| 20:17.41 | cr2 | Machine: HTC Universal |
| 20:17.54 | cr2 | Memory: 63MB = 63MB total |
| 20:18.07 | cr2 | Memory: 56704KB available (1328K code, 282K data, 76K init) |
| 20:18.30 | rob_w | damn . it has 2 of them ?? |
| 20:18.49 | rob_w | so can you ssh ? |
| 20:19.28 | cr2 | where ? i have the IR console. |
| 20:19.59 | cr2 | and must reset, because i 'm afraid of destroying the LED. |
| 20:20.29 | rob_w | no usb docking ? |
| 20:21.22 | cr2 | no docking at all. but the mini-USB connector. no serial at all. |
| 20:21.34 | cr2 | IR,BT,WIFI. |
| 20:21.41 | cr2 | UMTS :) |
| 20:22.09 | eme | LED's have arround 100.000 hours lifetime |
| 20:22.10 | cr2 | platform_device_register pxa2xx-mci |
| 20:23.19 | cr2 | platform_device_register pxa2xx-fb |
| 20:23.29 | cr2 | i don't need these two. |
| 20:24.21 | cr2 | i don't know the exact LED type here. just cautious. |
| 20:24.49 | eme | sure, but think you should not worry abt to brun it out |
| 20:25.36 | eme | I have LED for testing prupose connectet over capacitor and diode directly on 220V for a year now |
| 20:25.54 | cr2 | :) |
| 20:26.18 | cr2 | i must find the gpio that switches it on. |
| 20:27.08 | eme | how do you check this gpio things? |
| 20:27.38 | cr2 | with haret. |
| 20:27.58 | cr2 | you can watch, or just mess directly with the registers. |
| 20:32.06 | cr2 | rob_w: http://wiki.xda-developers.com/index.php?pagename=UniversalProgress |
| 20:33.57 | cr2 | eme, do you have a bluenagel ? |
| 20:34.12 | cr2 | blueangel. |
| 20:34.29 | eme | yes |
| 20:34.38 | cr2 | 5 or 6 ? |
| 20:34.45 | eme | 6 :( |
| 20:35.10 | cr2 | hmm. |
| 20:35.59 | eme | susspend works but if I switch it off with power button it doesnt come up |
| 20:37.33 | cr2 | i hope to have such problems soon :) |
| 20:39.41 | eme | I'm not sure if suspend properly, becouse screen stay like some grey collor and backlite is still on |
| 20:40.18 | rob_w | cr2, if that boot was from you , then you are missing the correct lib/modules for your TAG kernel |
| 20:40.52 | *** join/#htc-blueangel petaflot (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 20:40.57 | cr2 | yes. but that is the last of my problems :) |
| 20:41.23 | cr2 | i hoped to get getty on my IR console. |
| 20:41.38 | rob_w | cr2 what is your next step ? |
| 20:41.45 | rob_w | ah |
| 20:42.12 | cr2 | get rid of the fb and mci init. |
| 20:42.36 | cr2 | research asic3 gpios and init. |
| 20:42.41 | cr2 | research lcd init. |
| 20:42.50 | rob_w | hm the tty`s do come and connect |
| 20:43.20 | cr2 | getty was just a joke. but it is easy to do. |
| 20:44.59 | cr2 | i hope to merge the pxa27x fb driver from openEZX. then test the keyboard and camera. |
| 20:45.25 | cr2 | BTW, what about IR on the BA and hima ? |
| 20:49.28 | rob_w | if there is a supposed tobe message : w100fb_resume: level:3 ,,, i dont get it . I now only see level 2 and there it stucks |
| 20:59.41 | cr2 | pH5: are you still here ? |
| 21:00.12 | rob_w | ok now i will test to only resume the ramdisk |
| 21:00.19 | rob_w | then i switch the image |
| 21:15.12 | *** part/#htc-blueangel petaflot (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 21:18.55 | *** join/#htc-blueangel petaflot (n=dave@lsn-boi-catv-c114-p094.vtx.ch) |
| 21:25.20 | cr2 | rob_w, why gpe can't identify the CPU properly on himalaya and blueangel ? |
| 21:28.13 | pH5 | cr2: from time to time |
| 21:29.02 | cr2 | ? the screenshots say PXA255. |
| 21:53.25 | rob_w | i think that is proper ,, as this is its cpu , yet both have different memory`s attached .. that then is named pxa27x or so |
| 21:53.47 | cr2 | weird. |
| 21:54.25 | rob_w | yep i think it is how mach ram that cpu connects |
| 21:54.42 | rob_w | now for a clean image |
| 21:55.05 | cr2 | put a note for blueangle: remove #ifdef *BLUEANGEL from the asic3 header, and set .bus_shift=1 |
| 21:55.30 | cr2 | hx4700 does it. |
| 21:56.05 | rob_w | where should we set .bus_shift ` |
| 21:57.05 | cr2 | static struct asic3_platform_dat |
| 21:58.13 | rob_w | hmm |
| 21:58.50 | cr2 | look at hx4700 code. it is the same setup with the same asic3 and asic3sdio base addresses. |
| 21:59.19 | rob_w | ok , will keep that in mind |
| 21:59.40 | rob_w | doesnt use the hx4700 also the acx100 wifi ? |
| 21:59.53 | pH5 | rob_w: correct |
| 22:00.09 | rob_w | check |
| 22:00.42 | cr2 | yes. |
| 22:01.07 | cr2 | pH5: boot the kernel _now_ :) |
| 22:01.48 | cr2 | do you have the hx4700 'dump gpio' somewhere ? |
| 22:02.18 | pH5 | cr2: no. when I got my hx4700 the haret times were already over |
| 22:02.28 | cr2 | :))) |
| 22:02.54 | rob_w | crap , the tslib.patch is not yet in |
| 22:03.05 | rob_w | at least not in my oe here |
| 22:03.09 | cr2 | we don 't have such luxury as the support from hp :) |
| 22:04.03 | cr2 | pH5: you can boot without the framebuffer. |
| 22:07.03 | pH5 | cr2: I'll take some time tomorrow and play with this. I need the phone today :) |
| 22:07.47 | rob_w | himalaya uses the same ts.conf , righto ? |
| 22:08.08 | cr2 | as ba ? |
| 22:20.01 | rob_w | pH5, could give bug 516 a go ? |
| 22:25.04 | pH5 | rob_w: done |
| 22:25.59 | rob_w | great ! |
| 22:26.38 | rob_w | i guess for himalaya and the others we could do the same but for ba it is confirmed |
| 22:28.09 | rob_w | but we still miss something ... |
| 22:29.59 | cr2 | rob_w, packaging question. can we create a common ramdisk for hima,ba and universal ? |
| 22:30.20 | cr2 | what should we put in the ramdisk, anyway ? |
| 22:30.50 | rob_w | hmm we are running tagged kernels .. i am unsure if that is reasonable |
| 22:31.13 | rob_w | i am loading touchscren and usb always .. |
| 22:32.35 | cr2 | what is in the ramdisk ? modules ? something eat 7MB of my precious ram :) |
| 22:35.29 | cr2 | wasn't initramfs made for the purpose of setting up the system ? we are not really running off the ramdisk. |
| 22:39.06 | rob_w | cr2, what do you think ? |
| 22:43.33 | cr2 | get rid of ramdisk |
| 22:44.15 | cr2 | i have made some changes, including .bus_shift on universal, the LED is not switched on anymore :) |
| 22:44.20 | rob_w | crap , now i am stuck on the touch screen |
| 22:45.14 | cr2 | i don't have the touchscreen driver... i don't even know the chip. |
| 22:45.55 | rob_w | on universal ? |
| 22:48.31 | cr2 | yes. |
| 22:49.48 | cr2 | usb says: device descriptor read/64 error -110. wasn 't it the same on ba ? |
| 22:56.40 | rob_w | tslib is broken on my image |
| 22:58.47 | rob_w | do you get reactions on plug unplug , cr2 |
| 22:58.58 | cr2 | do you have a "standalone" ramdisk somewhere ? i can't boot gpe without the LCD :) |
| 22:59.00 | cr2 | yes. |
| 22:59.54 | rob_w | the current one is standalone ( not booting mmc ) if the kernel parameter is not used |
| 23:00.17 | cr2 | ok. downloading. |
| 23:01.08 | rob_w | cr2, so do you have ssh connection to universal yet ? |
| 23:02.26 | cr2 | i don't have working usb yet. must check the config. don 't forget i have pxa27x_udc |
| 23:02.44 | cr2 | no pxa25x_udc |
| 23:07.42 | rob_w | thats cool, you always need to load pxa2xx_udc |
| 23:09.04 | pH5 | cr2: I had pxa27x_udc and g_ether already loaded, just no signal on the other side. so I hope this will just be an issue of switching the right gpio or something. |
| 23:09.24 | pH5 | good night all |
| 23:09.36 | *** part/#htc-blueangel pH5 (n=ph5@e178238069.adsl.alicedsl.de) |
| 23:12.10 | rob_w | one last test and then i am also done |
| 23:16.02 | rob_w | pheww |
| 23:18.51 | rob_w | --and now the big test |
| 23:22.39 | cr2 | rob_w: who is loading the pxa2*_udc ? |
| 23:23.06 | rob_w | g_ether normally should |
| 23:23.33 | cr2 | hmm. forgot to configure g_ether |
| 23:24.22 | cr2 | do i need other gadgets ? |
| 23:25.35 | cr2 | gadget/char can't be compiled |
| 23:25.39 | rob_w | portmap i guess |
| 23:26.08 | *** join/#htc-blueangel iclem (n=clement@iclem.net) |
| 23:26.43 | cr2 | ? what is portmap in kernel ? |
| 23:27.03 | cr2 | ok g_ether g_serial |
| 23:27.17 | rob_w | we need a patch for detect-stylus |
| 23:28.42 | iclem | hi all |
| 23:28.58 | JuNuKN | Hey iclem |
| 23:30.02 | rob_w | hmm a simple export might be enough for detect-stylus |
| 23:30.24 | cr2 | ok. copied the modules to rd. will see how long it will survive. |
| 23:34.53 | rob_w | and load them :-) |
| 23:36.07 | rob_w | good luck cr2 , cu |
| 23:40.22 | JuNuKN | iclem .... do you know, whether now a gpe image for the himalaya with sd card support exist? Progress with the charging or Sound / GSM ? |
| 23:45.16 | iclem | hi JuNuKN |
| 23:45.38 | iclem | no sd gpe image yet, you can do it if you want |
| 23:45.57 | iclem | you can look at curretn ba image and do the same with BA |
| 23:47.34 | iclem | I'm looking for the problem with battery charging and have not found yet |
| 23:48.26 | JuNuKN | I am not shure how to convert the ramdisk image into a image for the sd card !? Where to read ? |
| 23:48.37 | iclem | all seems to be correctly set (as on winCE), GPIOD reflects correctly AC in |
| 23:50.25 | JuNuKN | Maybe not the prerequisites !? Maybe somehow to set programmatically a kind of timer for the charging ? |
| 23:50.56 | iclem | JuNuKN: follow BlueAngel wiki on hh.org, look at linuxrc in BA initRD |
| 23:51.35 | iclem | yes strange as lkcl tell me it did work in the past |
| 23:52.28 | JuNuKN | maybe something with the bitshift for a port, which was changed for the sd card support? |
| 23:53.13 | iclem | battery was not charging before lkcl's asic3_mmc sucessfull tweak |
| 23:53.28 | JuNuKN | ooops sorry |
| 23:54.45 | iclem | as there is not battery status working on hima, i must do last every test long enough to discharge battery |
| 23:55.06 | iclem | to know if the change works |
| 23:59.44 | iclem | I'm going to sleep now, good night all |