00:38.50 | *** join/#htc-blueangel immolo (n=immolo@cpc1-cosh1-4-0-cust126.cos2.cable.ntl.com) |
05:57.31 | *** join/#htc-blueangel JuNuKN (n=JuNuKN@Kc244.k.pppool.de) |
07:20.09 | *** join/#htc-blueangel rob_w-cgi (n=txuser@dd1010.kasserver.com) |
07:20.10 | *** mode/#htc-blueangel [+o rob_w-cgi] by ChanServ |
07:21.28 | rob_w-cgi | good morning |
07:37.43 | *** join/#htc-blueangel ferrett1968 (n=txuser@dd1010.kasserver.com) |
07:40.07 | rob_w-cgi | good morning ferrett1968 |
07:41.13 | *** join/#htc-blueangel ferrett1968 (n=txuser@dd1010.kasserver.com) |
07:41.45 | rob_w-cgi | good morning ferrett1968 again |
07:42.26 | *** join/#htc-blueangel athos (n=txuser@dd1010.kasserver.com) |
07:43.16 | rob_w-cgi | good morning athos |
07:43.50 | *** part/#htc-blueangel athos (n=txuser@dd1010.kasserver.com) |
07:44.30 | *** join/#htc-blueangel athos1 (n=txuser@dd1010.kasserver.com) |
07:55.39 | *** join/#htc-blueangel athos3 (n=txuser@dd1010.kasserver.com) |
07:56.11 | athos3 | hi rob as you can see i'm trying too use the web chat :-) |
07:56.25 | athos3 | i', ferrett1968 |
08:08.32 | rob_w-cgi | ok what is your problem ? |
08:10.14 | athos3 | hi |
08:10.17 | athos3 | well |
08:10.30 | athos3 | i exploded the gpe image on part2 |
08:10.43 | athos3 | i connected |
08:10.51 | rob_w-cgi | ok |
08:11.01 | athos3 | modprobe asic3_mmc mmc_block |
08:11.12 | athos3 | mount part1 /boot |
08:11.23 | athos3 | mount part2 /mnt |
08:11.30 | athos3 | chroot /mnt |
08:11.31 | rob_w-cgi | ok |
08:11.47 | rob_w-cgi | ok now check via ls /dev/input |
08:11.56 | athos3 | echo g_ether >/etc/modutils/g_ether |
08:12.15 | rob_w-cgi | this echo you only need to do once |
08:12.29 | rob_w-cgi | also rm /etc/pointercal |
08:12.37 | athos3 | a sec |
08:12.44 | athos3 | i did all again |
08:12.52 | rob_w-cgi | that deletes the calibration and gpe-dm should then start the calibration when it starts |
08:12.52 | athos3 | because o formatted the card |
08:13.02 | rob_w-cgi | ok |
08:13.07 | athos3 | so |
08:13.13 | athos3 | i chrooted |
08:13.16 | athos3 | mnt |
08:13.26 | rob_w-cgi | ls /dev/input |
08:13.32 | athos3 | ok |
08:14.12 | athos3 | there is just mice |
08:14.28 | rob_w-cgi | lsmod |
08:14.39 | rob_w-cgi | and search for evdev and himalaya_ts |
08:14.56 | athos3 | what does it mean? |
08:15.15 | rob_w-cgi | type: lsmod |
08:15.19 | athos3 | ok |
08:15.37 | athos3 | there is nor evdev nor himalaya_ts |
08:15.53 | rob_w-cgi | modprobe evdev himalaya_ts |
08:16.05 | rob_w-cgi | ls /dev/input |
08:17.08 | athos3 | module himalaya_ts not found |
08:17.24 | rob_w-cgi | argh |
08:17.29 | athos3 | oh |
08:17.58 | athos3 | have i to copy it from somewhere to somewhere? |
08:18.04 | rob_w-cgi | cd /lib/modules/2.6.12-hh2/arch/arm/mach-pxa |
08:18.40 | athos3 | there is no arch |
08:18.57 | rob_w-cgi | is the initrd still mounted ? |
08:19.02 | athos3 | yes |
08:19.08 | athos3 | part1 ? |
08:19.32 | rob_w-cgi | cd into the initrd and copy all lib/modules to /mnt/lib/modules , ok ? |
08:19.47 | rob_w-cgi | no |
08:19.56 | rob_w-cgi | show me |
08:19.57 | athos3 | where is initrd? |
08:19.58 | rob_w-cgi | mount |
08:21.36 | athos3 | what? |
08:21.59 | athos3 | is part2? |
08:22.05 | rob_w-cgi | what is the output of the mount command ? |
08:22.16 | athos3 | ok |
08:22.40 | athos3 | i have to rewrite it i chat with a pc and work with another |
08:22.44 | athos3 | a sec |
08:23.25 | athos3 | #/dev/root on / |
08:23.42 | athos3 | #none on /dev |
08:23.54 | athos3 | proc on /proc |
08:24.16 | athos3 | devpts on /dev/pts |
08:24.47 | athos3 | #/dev/mmc/bl0ck/part1 on /boot |
08:25.11 | athos3 | #/dev/mmc/bl0ck/part2 on /mnt |
08:25.16 | athos3 | ok |
08:25.23 | rob_w-cgi | wait a sec |
08:28.10 | rob_w-cgi | i need to work a bit |
08:28.15 | athos3 | ok |
08:28.29 | rob_w-cgi | u did not chroot , right ? |
08:28.55 | athos3 | i did |
08:28.58 | athos3 | but |
08:29.01 | athos3 | i exited |
08:30.08 | athos3 | i have a tree in / and another familiar tree in /mnt |
08:31.10 | athos3 | wait wait wait!!!!!!!! |
08:31.18 | rob_w-cgi | ok |
08:31.26 | athos3 | i found it!!!!!! |
08:31.30 | rob_w-cgi | ok |
08:31.35 | athos3 | lib/ |
08:31.38 | athos3 | modules/ |
08:31.49 | athos3 | 2.6.12-hh2 |
08:31.54 | athos3 | kernel |
08:31.58 | athos3 | arch |
08:32.03 | athos3 | arm |
08:32.03 | rob_w-cgi | copy that to hte sdcard tree |
08:32.33 | athos3 | may you please tell me what to write? |
08:32.40 | athos3 | please :-) |
08:34.00 | athos3 | but is not himalaya_ts |
08:34.12 | athos3 | is himalaya_ts3.ko |
08:34.16 | athos3 | and |
08:34.29 | athos3 | himalaya_tsc2200.ko |
08:34.53 | athos3 | and is also on the sd card tree |
08:35.05 | athos3 | in new and old kernel |
08:35.06 | rob_w-cgi | oh then use |
08:35.20 | rob_w-cgi | i missed the 3 in the end ! |
08:35.35 | athos3 | pardon? |
08:35.57 | rob_w-cgi | i mean himalaya_ts3 <- |
08:36.23 | athos3 | ok ok but it's himalaya_ts3.ko |
08:36.32 | athos3 | what should i write? |
08:36.32 | rob_w-cgi | say modprobe evdev himalaya_ts3 |
08:36.36 | athos3 | ok |
08:36.54 | athos3 | all ok |
08:36.57 | athos3 | now |
08:37.11 | rob_w-cgi | ls /dev/input |
08:37.46 | athos3 | in lsmod there is no himalaya |
08:38.15 | athos3 | in /dev/input there is only mice |
08:38.30 | athos3 | ok ok |
08:38.36 | athos3 | i got everything |
08:38.46 | athos3 | i did modprobe himalaya_ts3 |
08:38.52 | athos3 | now there is |
08:38.56 | athos3 | event0 |
08:39.02 | rob_w-cgi | okokok |
08:39.03 | athos3 | in dev/input |
08:39.39 | athos3 | now? |
08:42.13 | rob_w-cgi | ok |
08:42.36 | rob_w-cgi | ok then do remove /etc/pointercal |
08:42.48 | athos3 | rm /etc/pointercal ? |
08:42.55 | rob_w-cgi | then start /usr/bin/gpe-dm |
08:42.57 | rob_w-cgi | yes |
08:43.36 | athos3 | there is no pointrecal |
08:43.43 | athos3 | in /etc |
08:43.57 | rob_w-cgi | is that the tree of gpe on the sdcard |
08:44.17 | athos3 | no it's in root |
08:44.27 | athos3 | #/ |
08:45.13 | athos3 | done rm |
08:45.20 | athos3 | now |
08:45.28 | athos3 | start /usr/bin/gpe-dm |
08:45.36 | rob_w-cgi | ok now try start gpe-dm |
08:45.48 | athos3 | i write it like i wrote? |
08:46.13 | athos3 | have i to chroot? |
08:46.23 | rob_w-cgi | yes |
08:46.35 | rob_w-cgi | then start gpe-dm |
08:46.45 | rob_w-cgi | cd /usr/bin |
08:46.49 | rob_w-cgi | ./gpe-dm |
08:47.37 | athos3 | done |
08:47.45 | athos3 | a lot of errors |
08:49.05 | athos3 | cannot open /proc/cpuinfo |
08:49.17 | athos3 | cannot open /dev/tty0 |
08:49.29 | athos3 | can't open display |
08:49.39 | athos3 | can't open display (null) |
08:50.09 | rob_w-cgi | hmm ok |
08:50.11 | athos3 | have i to update-modules? |
08:50.27 | rob_w-cgi | did you chroot ? |
08:50.32 | athos3 | yes |
08:50.39 | athos3 | in /mnt |
08:50.47 | rob_w-cgi | make a |
08:50.49 | rob_w-cgi | mount -a |
08:50.52 | rob_w-cgi | to mount proc |
08:51.14 | athos3 | no suck file |
08:51.18 | athos3 | such |
08:51.23 | athos3 | sorry ;-) |
08:51.35 | *** join/#htc-blueangel immolo (n=immolo@cpc1-cosh1-4-0-cust126.cos2.cable.ntl.com) |
08:51.39 | rob_w-cgi | ahm |
08:51.43 | rob_w-cgi | hi immolo |
08:52.05 | rob_w-cgi | ok do the following |
08:52.11 | athos3 | ok |
08:52.12 | rob_w-cgi | mkdir /mnt/oldroot |
08:52.18 | immolo | hey |
08:52.27 | rob_w-cgi | pivot_root /mnt /mnt/oldroot |
08:53.17 | athos3 | i am chrooted in mnt |
08:53.39 | athos3 | exit? |
08:54.16 | athos3 | i exited chroot |
08:55.16 | rob_w-cgi | ok |
08:55.28 | rob_w-cgi | then do the pivot_root command |
08:56.14 | athos3 | says pivot_root NEW_ROOT PUT_OLD |
08:58.22 | athos3 | may be there is something strange in the command pivot_root /mnt/mnt/oldroot |
08:59.07 | rob_w-cgi | yeah that was wrong |
08:59.17 | rob_w-cgi | pivot_root /mnt /mnt/oldroot |
08:59.39 | athos3 | should i do it chrooted or not? |
08:59.59 | rob_w-cgi | doesnt matter |
09:00.19 | rob_w-cgi | mave a space between /mnt and /mnt/oldroot |
09:00.23 | athos3 | i am not chrooted in /mnt and i write the command |
09:00.26 | athos3 | ok |
09:01.05 | athos3 | done |
09:02.48 | athos3 | now? |
09:03.59 | rob_w-cgi | mount -a |
09:04.07 | rob_w-cgi | cat /proc/cpuinfo |
09:04.09 | athos3 | ok |
09:04.26 | athos3 | yes |
09:04.31 | athos3 | it's there |
09:04.33 | rob_w-cgi | then start gpe-dm .. brb ( be right back ) for a smoke |
09:04.48 | athos3 | ooooooooooookkkkk! |
09:05.00 | rob_w-cgi | wokrs #?? |
09:05.19 | athos3 | doesn't give errors |
09:05.21 | athos3 | :-) |
09:05.26 | athos3 | is it ok? |
09:05.35 | athos3 | update-modules? |
09:05.42 | athos3 | or chroot /mnt? |
09:06.30 | athos3 | or reboot? |
09:09.15 | rob_w-cgi | no reboot !!!! |
09:09.19 | athos3 | ok ok |
09:09.27 | rob_w-cgi | a reboot starts windows! |
09:09.35 | rob_w-cgi | did gpe-dm start ? |
09:09.35 | athos3 | oh |
09:10.06 | athos3 | i just wrote gpe-ddm in /usr/bin |
09:10.46 | athos3 | no errors |
09:11.06 | rob_w-cgi | write ./gpe-dm |
09:11.12 | athos3 | ok |
09:11.24 | athos3 | done |
09:11.29 | athos3 | no errors |
09:11.37 | athos3 | in the tree of initrd |
09:11.42 | rob_w-cgi | and does the screen show gpe-dm |
09:11.51 | athos3 | nothing |
09:12.23 | athos3 | have i to go to /mnt/usr/bin ? |
09:12.32 | athos3 | ( the sd tree) |
09:12.50 | rob_w-cgi | yes well you chroot to that tree via pivot_root |
09:13.01 | rob_w-cgi | ls / |
09:13.01 | athos3 | ok |
09:13.07 | immolo | right then lets start the ba distro again with some new changes |
09:13.08 | rob_w-cgi | should show you the sdtree |
09:13.13 | rob_w-cgi | no |
09:13.25 | rob_w-cgi | oh that was immolo |
09:13.29 | immolo | lol |
09:13.31 | rob_w-cgi | hehe |
09:13.55 | rob_w-cgi | do you see a output from ls /usr/bin/gpe-dm ? |
09:14.16 | athos3 | please repeat me what to do ;-) |
09:14.25 | rob_w-cgi | immolo i tryed this morining the newer kernel but yet i didnt succeed with sound |
09:14.40 | rob_w-cgi | athos3 ls /usr/bin/gpe-dm |
09:14.43 | immolo | rob - I get no sound either |
09:15.04 | athos3 | there is /usr/bin/gpe-dm |
09:15.14 | immolo | but like I say that is the least of my worries, if I have ts I can get most of that all workinh |
09:15.15 | rob_w-cgi | immolo either crappy sourceforge didn give me the real code |
09:15.47 | immolo | more then likey |
09:16.00 | rob_w-cgi | athos3 , what does the screen of the ba show ? still the black white console ? |
09:16.08 | athos3 | yes |
09:16.21 | immolo | I think we should start a donation fund to buy as some cheap hosting with some cvs server action |
09:16.37 | rob_w-cgi | hehe yeah |
09:16.47 | immolo | no more sourceforge issues then |
09:16.53 | rob_w-cgi | well we could apply hh.org cvs |
09:17.06 | rob_w-cgi | immolo let me check with the gpe people |
09:17.07 | immolo | heh I was just going to suggest then |
09:17.42 | rob_w-cgi | did already |
09:18.02 | immolo | anyway hh.org would be good as it will be less of an issue when it comes to mergeing |
09:18.02 | rob_w-cgi | athos3 what happens when you do /usr/bin/gpe-dm |
09:18.09 | athos3 | have i to add boot_mmc= in default.txt x Haret and make it start? |
09:18.13 | athos3 | nothing |
09:18.21 | athos3 | just prompt # |
09:19.32 | rob_w-cgi | athos3 go to /usr/bin/ |
09:19.38 | athos3 | ok |
09:19.38 | rob_w-cgi | then do |
09:19.43 | rob_w-cgi | ./xtscal |
09:20.24 | athos3 | x11 connection rejected because of wrong authentication |
09:20.47 | rob_w-cgi | wtf |
09:20.53 | athos3 | ChanServ: x connection to localhost:10.0 broken |
09:21.05 | athos3 | ? |
09:21.05 | rob_w-cgi | ?!? |
09:21.10 | athos3 | i donno |
09:21.19 | immolo | I had to do "DISPLAY=":0" xtscal" |
09:21.44 | immolo | with gpe-dm already started |
09:21.45 | athos3 | i wrote :x connection to localhost:10.0 broken |
09:21.58 | athos3 | i wrote : x connection to localhost:10.0 broken |
09:23.09 | athos3 | if i write boot_mmc= in defailt.txt file in part1 x haret? |
09:23.14 | athos3 | and restart it? |
09:23.19 | immolo | rob_w-cgi- you need to bring back your sd autoload initrd :P |
09:23.31 | athos3 | ? |
09:23.45 | immolo | athos3- I haven't used the boot_mmc option yet so I don't know |
09:23.52 | athos3 | oh |
09:24.09 | athos3 | it makes automatically start the 2nd partition |
09:24.15 | immolo | I know :P |
09:24.23 | athos3 | ok ok |
09:24.30 | athos3 | i'm a newby :-( |
09:24.43 | immolo | hehe no problem we all start somewhere |
09:24.50 | athos3 | :-) |
09:25.14 | immolo | it's not as if we are all from a debian camp :P |
09:25.32 | athos3 | ;-) |
09:26.12 | athos3 | now? |
09:27.55 | athos3 | if i try to boot from mmc |
09:28.07 | athos3 | does now the touchscreen work? |
09:28.20 | athos3 | have i to update modules? |
09:28.40 | immolo | I know cp15 has told some people to use it |
09:28.53 | athos3 | i did and it worked |
09:28.58 | athos3 | he told me |
09:28.59 | immolo | give it a shot, all that will happen is you will have to reboot |
09:29.02 | rob_w-cgi | well we need to start gpe-dm somehow |
09:29.09 | athos3 | ok |
09:29.14 | athos3 | let me try |
09:29.20 | athos3 | just few minutes |
09:29.23 | rob_w-cgi | go into /usr/bin |
09:29.27 | rob_w-cgi | ls X* |
09:30.33 | athos3 | Xfbdev |
09:32.33 | rob_w-cgi | ./Xfbdev |
09:33.40 | athos3 | fatal server error |
09:34.11 | athos3 | could not create lock file in /tmp/ .tx0lock |
09:34.26 | athos3 | could not create lock file in /tmp/ .tX0lock |
09:35.13 | athos3 | do you want me to try cp15 method? (add boot_mmc=y in default.txt for haret?) |
09:35.25 | athos3 | and reboot? |
09:35.31 | athos3 | last time |
09:35.35 | athos3 | i worked |
09:35.41 | athos3 | but i didn't have |
09:35.45 | athos3 | the touchscreen |
09:36.00 | athos3 | i saw the login snapshot |
09:36.19 | athos3 | but i didn't have the touchscreen |
09:36.26 | athos3 | to do it |
09:36.38 | athos3 | should i update-modules ? |
09:37.54 | athos3 | i'm sorry boreing you all but i really want to use familiar on it |
09:38.08 | athos3 | i installed on a 3900 |
09:38.17 | athos3 | h3900 h3950 h5550 |
09:38.41 | athos3 | i do appreciate it |
09:39.03 | athos3 | think that i began to study linux just for it ;-) |
09:41.32 | athos3 | any ideas? |
09:45.25 | rob_w-cgi | hang on |
09:45.39 | athos3 | ok |
09:48.29 | athos3 | i rebooted the device adding the boot_mmc=y |
09:48.35 | athos3 | gpe-dm started |
09:48.47 | athos3 | calibration screen |
09:48.55 | athos3 | but doesn't work |
09:49.30 | athos3 | doesn't seem to receive inputs from the pen |
09:49.38 | athos3 | or from the touchscreen |
09:55.49 | athos3 | now i returned on the device via usbnet |
10:00.17 | rob_w-cgi | well i am not sure if that initrd loads the touchscreen probably |
10:00.25 | rob_w-cgi | can you now login via ssh ? |
10:00.33 | athos3 | yes i'm in |
10:00.40 | athos3 | i chrooted /mnt |
10:00.47 | rob_w-cgi | dont do that now |
10:00.48 | athos3 | i tryed gpe-dm |
10:00.53 | athos3 | ok |
10:00.59 | rob_w-cgi | check for /dev/input/event0 |
10:01.01 | athos3 | exit from chrootd |
10:01.04 | athos3 | ok |
10:03.01 | athos3 | #/mnt/dev isn't a directory |
10:03.13 | athos3 | i mounted part2 on /mnt |
10:03.50 | athos3 | in the initrd /dev |
10:04.04 | athos3 | there is a input/event0 |
10:04.58 | athos3 | ok |
10:06.58 | athos3 | have i to pivot_root /mnt /mnt/oldroot? |
10:12.44 | athos3 | IT WORKSSSSSSSSSSSSS!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
10:13.26 | rob_w-cgi | ok |
10:13.32 | rob_w-cgi | so you can touch ?? |
10:13.33 | athos3 | YES |
10:13.37 | rob_w-cgi | what did you do ? |
10:13.40 | athos3 | but the pass? |
10:13.46 | rob_w-cgi | root |
10:13.49 | rob_w-cgi | and pass is tt |
10:14.08 | athos3 | i pivot_root /mnt /mnt/oldroot |
10:14.11 | athos3 | then |
10:14.18 | athos3 | cd usr/bin |
10:14.22 | athos3 | gpe-dm |
10:14.26 | athos3 | it started |
10:14.42 | rob_w-cgi | ok seems the initrd that is used is not doing this correctly |
10:14.43 | athos3 | i calibrated the ts |
10:15.09 | athos3 | but if i tap a letter it writes two |
10:15.12 | athos3 | ? |
10:15.27 | rob_w-cgi | that is your /etc/ts.conf |
10:15.36 | rob_w-cgi | use the one i told you |
10:15.47 | athos3 | pardon? |
10:16.01 | rob_w-cgi | but the orig /etc/ts.conf in the gpe-image should be fine |
10:16.15 | athos3 | what should i do? |
10:16.48 | rob_w-cgi | i need a brake ,, i was on he phone to a customer now for 2 hours |
10:17.01 | athos3 | ok ok i'll wait |
10:17.19 | athos3 | i wtote t and it wrote tt so i'm in |
10:17.22 | athos3 | :-) |
10:29.19 | athos3 | brb for lunch |
10:29.29 | athos3 | bye |
10:29.52 | athos3 | bach in few minutes |
10:29.56 | athos3 | back |
10:31.08 | rob_w-cgi | ok |
11:18.13 | athos3 | hi |
11:18.30 | athos3 | eob_w may you please tell me where to find |
11:18.45 | athos3 | ts.conf working to copy to the device? |
11:25.31 | athos3 | eob_w may you please tell me where to find |
11:45.12 | rob_w-cgi | the gpe-image should hav a good one |
11:48.44 | athos3 | whitch? |
11:49.12 | athos3 | the one on handhelds.org/moin/moin.cgi/Blueangel? |
11:49.25 | rob_w-cgi | yep |
11:49.43 | athos3 | is the one i'm using |
11:49.52 | athos3 | isnt'it? |
11:50.44 | rob_w-cgi | hmm |
11:50.45 | rob_w-cgi | i guess sop |
11:51.16 | athos3 | as it is a txt file,may you please edit your one and send me what is in<' |
11:51.19 | athos3 | ? |
11:51.26 | athos3 | are just 6 lines |
11:51.29 | athos3 | please |
11:51.40 | rob_w-cgi | ok hang on |
11:52.13 | athos3 | ok |
11:52.53 | rob_w-cgi | ok the lines are |
11:53.07 | rob_w-cgi | module_raw input |
11:53.18 | rob_w-cgi | module pthres pmin=1 |
11:53.29 | rob_w-cgi | module variance delta=30 |
11:53.42 | rob_w-cgi | module dejitter delta=100 |
11:53.47 | rob_w-cgi | module linear |
11:54.00 | rob_w-cgi | i guees you ahve the same , right ? |
11:54.02 | athos3 | like mine |
11:54.06 | athos3 | yes |
11:54.19 | athos3 | i have to check why it happens |
11:54.32 | rob_w-cgi | i remeber a older touchscreen driver which did that |
11:55.24 | rob_w-cgi | i cant think anymore i am getting sick ,, maybe i will leave my office earlier today |
11:55.41 | athos3 | ok |
11:55.51 | rob_w-cgi | well |
11:56.02 | athos3 | see you again and the best thankssssssss! :_) |
11:56.05 | athos3 | :-) |
11:56.10 | rob_w-cgi | ur welcome |
11:56.26 | rob_w-cgi | do you know alessandro rubini ? |
11:56.39 | athos3 | no |
11:56.56 | athos3 | it's not new for me but i don't |
11:57.05 | athos3 | how is him? |
11:57.17 | rob_w-cgi | is a italian linux guru i am in contact with |
11:57.39 | athos3 | let me contact him ! |
11:57.49 | rob_w-cgi | ?? |
11:58.39 | athos3 | as i'm italian |
11:58.58 | athos3 | would be easyer for me to contact him :-) |
11:59.12 | athos3 | just kidding about the |
11:59.20 | athos3 | nationality |
11:59.25 | athos3 | :-) |
11:59.45 | rob_w-cgi | ah , np |
11:59.50 | athos3 | ok |
12:00.00 | athos3 | will i meet you next days? |
12:00.55 | rob_w-cgi | surely .. i also now have more time to spend on my ba |
12:01.09 | rob_w-cgi | i want ti to suspend properly and have the phone runnign |
12:01.33 | athos3 | ok |
12:01.47 | athos3 | best wishes and best thanks |
12:14.10 | rob_w-cgi | cu |
13:45.16 | *** join/#htc-blueangel ferrett1968 (n=ferrett1@adsl-81-123.37-151.net24.it) |
13:45.48 | ferrett1968 | rob_w-cgi hi, can i disturb you? |
13:55.23 | rob_w-cgi | sure |
15:24.34 | *** join/#htc-blueangel pH5 (n=ph5@e178202245.adsl.alicedsl.de) |
15:25.53 | *** join/#htc-blueangel ferrett1968 (n=ferrett1@adsl-81-123.37-151.net24.it) |
16:38.33 | *** join/#htc-blueangel immolo (n=immolo@cpc1-cosh1-4-0-cust126.cos2.cable.ntl.com) |
17:24.36 | *** join/#htc-blueangel rob_w (n=bob@p83.129.172.94.tisdip.tiscali.de) |
17:24.36 | *** mode/#htc-blueangel [+o rob_w] by ChanServ |
17:24.54 | bhima | hey rob. |
17:29.22 | rob_w | hey bhima |
19:19.25 | *** part/#htc-blueangel pH5 (n=ph5@e178202245.adsl.alicedsl.de) |
19:29.06 | *** join/#htc-blueangel JuNuKN (n=JuNuKN@Kdfcb.k.pppool.de) |
21:17.39 | *** join/#htc-blueangel JuNuKN (n=JuNuKN@Kdfcb.k.pppool.de) |