IRC log for #hawkboard on 20100309

`03:36.44`	`*** join/#hawkboard napster (~napster@117.196.134.35)`
`03:37.02`	`napster`	`Gaston\|Home, Can you help me with angstrom installation?`
`03:37.13`	`napster`	`ds2, infobot`
`03:39.55`	`napster`	`How to get a uImage?`
`03:41.28`	`napster`	`What is a uImage?`
`03:58.57`	`napster`	`!angstrom`
`03:59.43`	`napster`	`ANYONE CAN HELP ME OR ATLEAST RESPOND???`
`05:24.50`	`*** join/#hawkboard napster (~napster@117.196.134.35)`
`05:25.32`	`napster`	`chroos, ds2 Gaston\|Home valhalla What is the default boot args on the board?`
`05:26.12`	`napster`	`!u-boot`
`05:26.30`	`napster`	`infobot, u-boot`
`05:45.05`	`*** join/#hawkboard virals (~Viral_Sac@59.97.0.118)`
`06:14.35`	`*** join/#hawkboard valhalla (~valhalla@81-174-22-228.dynamic.ngi.it)`
`07:31.02`	`*** join/#hawkboard franktango (~a0746747@nat/ti/x-pezlzvteoguubxpr)`
`07:50.15`	`*** join/#hawkboard virals (~Viral_Sac@122.166.2.35)`
`07:51.12`	`Gaston\|Home`	`napster, you can get your image built at http://www.angstrom-distribution.org/narcissus/`
`07:52.19`	`Gaston\|Home`	`There is also quite a lot of good information to be had at http://groups.google.com/group/hawkboard and http://elinux.org/Hawkboard`
`07:52.39`	`Gaston\|Home`	`I hope this can get you started`
`07:52.52`	`Gaston\|Home`	`Have fun!`
`08:17.12`	`eFfeM`	`Gaston\|Home: save yourself time, he's already gone, too impatient`
`08:18.04`	`Gaston\|Home`	`I know, thought I'd point him to the log next time he is here`
`08:35.17`	`*** join/#hawkboard virals (~Viral_Sac@59.97.0.9)`
`09:04.00`	`*** join/#hawkboard _roger_ (~a0740758@nat/ti/x-zndondaroxkqefge)`
`09:15.54`	`*** join/#hawkboard virals (~Viral_Sac@59.97.0.252)`
`10:32.00`	`*** join/#hawkboard Manav (~manav@59.160.172.220)`
`10:34.12`	`*** part/#hawkboard Manav (~manav@59.160.172.220)`
`11:36.23`	`*** join/#hawkboard virals (~Viral_Sac@122.166.2.35)`
`12:18.52`	`*** join/#hawkboard napster (~napster@117.196.138.160)`
`12:19.47`	`napster`	`chroos, eFfeM Gaston\|Home infobot valhalla virals Can anyone help me with installation?`
`12:20.18`	`virals`	`napster: See log`
`12:20.24`	`virals`	`at http://ibot.rikers.org/%23hawkboard`
`12:20.36`	`virals`	`Gaston Had replyed ur query`
`12:20.41`	`Gaston\|Home`	`napster, please use the log web page to cjheck if someone has answered your earlier posts`
`12:20.48`	`Gaston\|Home`	`Thanks virals`
`12:20.59`	`napster`	`Gaston\|Home, virals pls let me check....`
`12:21.07`	`eFfeM`	`and shouting in the channel does not help either`
`12:21.43`	`virals`	`napster: If you have new query do send but have petitions; u can also send query on mailing list`
`12:21.55`	`eFfeM`	`btw chance to find someone here active at 2.30 am gmt is not that high, think most of the people here are in europe and so for them your msg was in the middle of the night`
`12:22.26`	`napster`	`eFfeM, Sorry mates :( I'm from india....`
`12:23.00`	`eFfeM`	`napster: 4.5 hr time diff from here, next month only 3.5 hr`
`12:23.04`	`virals`	`hai eFfeM, are u Frans of mailing list regarding 456 MHZ ?`
`12:23.22`	`eFfeM`	`i think i dropped a message in that thread, didn't try it yet`
`12:23.33`	`eFfeM`	`too busy`
`12:23.34`	`virals`	`eFfeM: you just need to reflash u-boot after configuring`
`12:23.43`	`napster`	`And the log is only upto 8th... Not todays log :-?`
`12:23.51`	`virals`	`you should able to use same uboot & kernel image`
`12:23.58`	`eFfeM`	`log is probably lagging`
`12:24.14`	`napster`	`Can I ask a few questions?`
`12:24.34`	`Gaston\|Home`	`[08:50] Gaston\|Home: napster, you can get your image built at http://www.angstrom-distribution.org/narcissus/`
`12:24.34`	`Gaston\|Home`	`[08:52] Gaston\|Home: There is also quite a lot of good information to be had at http://groups.google.com/group/hawkboard and http://elinux.org/Hawkboard`
`12:24.35`	`Gaston\|Home`	`[08:52] Gaston\|Home: I hope this can get you started`
`12:24.35`	`Gaston\|Home`	`[08:52] Gaston\|Home: Have fun!`
`12:24.44`	`eFfeM`	`ah ok i-m-ed it`
`12:25.22`	`napster`	`Gaston\|Home, I've one from narcissus`
`12:25.25`	`virals`	`napster: sure, any time`
`12:25.30`	`eFfeM`	`virals: what exactly do i have to change in u-boot? is that described somewhere ?`
`12:25.39`	`napster`	`But the problem is now with my uImage`
`12:25.44`	`Gaston\|Home`	`Have you guys seens that the hawkboard.org now reads "AM1808 / OMAP L 138 Open Community Portal" ?`
`12:25.44`	`eFfeM`	`never tried to update u-boot on hawk`
`12:26.27`	`virals`	`you dont need to change any thing in u-boot & kernel`
`12:26.33`	`virals`	`but while flashing u-boot`
`12:26.35`	`virals`	`at http://www.google.com/url?sa=D&q=http://elinux.org/images/6/68/AIS_gen_uart2.JPG&usg=AFQjCNGKrRFUp4q9zau9CiH-jXVc7tsjCg`
`12:26.48`	`virals`	`sorry at http://elinux.org/images/6/68/AIS_gen_uart2.JPG`
`12:27.30`	`virals`	`you need to modify multiplier & divider to get more/less than`
`12:27.30`	`virals`	`<PROTECTED>`
`12:27.30`	`virals`	`<PROTECTED>`
`12:27.30`	`virals`	`<PROTECTED>`
`12:27.40`	`eFfeM`	`oh, a windows program :-(`
`12:27.44`	`virals`	`this is part of ubl`
`12:27.45`	`virals`	`yes`
`12:27.49`	`napster`	`Gaston\|Home, And I've messed up my env variables too :(`
`12:27.52`	`virals`	`that is why I am not able to do :)`
`12:27.54`	`virals`	`:(`
`12:28.08`	`napster`	`Gaston\|Home, How can I get the default boot args?`
`12:28.35`	`Gaston\|Home`	`napster: http://groups.google.com/group/hawkboard/browse_thread/thread/09a27d3a2f4acabe#`
`12:28.53`	`napster`	`Gaston\|Home, That is me :)`
`12:29.05`	`napster`	`Gaston\|Home, The can you read it to the end?`
`12:29.23`	`eFfeM`	`virals: i have windows, but generally not handy when I am doing things for hawk`
`12:29.56`	`chroos`	`are you known to getting the source running on the ddram instead of shared memory? i dont really know... but it seems to be a lot code, to do it inside the starter script`
`12:30.20`	`eFfeM`	`if you know tftp that is the simplest start`
`12:30.32`	`eFfeM`	`you might also try to put a kernel in a fat partitionon usb`
`12:30.55`	`eFfeM`	`see www.elinux.org/hawkboard or so, i've written up the uboot args for both usb and nfs`
`12:30.57`	`napster`	`Gaston\|Home, Something wrong with my env?`
`12:31.00`	`eFfeM`	`nfs/tftp`
`12:31.01`	`Gaston\|Home`	`napster: I'm sorry I cant help you`
`12:31.14`	`napster`	`Gaston\|Home, np`
`12:31.30`	`napster`	`eFfeM, Can you?`
`12:31.34`	`chroos`	`im not shure... when i make an AIS image.. i can setup the ram... but does it copy all the files to the correct place, or do i have to do this by myself?`
`12:32.35`	`virals`	`napster: by the way, i m from bangalore, india`
`12:33.05`	`eFfeM`	`napster don't know what you need apart from what has been given already, what is your problem?`
`12:33.28`	`napster`	`virals, Viral Purohit?`
`12:33.53`	`napster`	`eFfeM, I've messed up with my env variables.`
`12:34.12`	`napster`	`eFfeM, How can I rollback to defaults?`
`12:35.29`	`eFfeM`	`type resetenv in u-boot will give you the u-boot defaults`
`12:35.37`	`eFfeM`	`and saveenv will save them`
`12:35.42`	`napster`	`eFfeM, let me try`
`12:36.30`	`eFfeM`	`the defaults are also given in teh page Gaston\|Home gave above (i suspect these are teh defaults)`
`12:36.36`	`virals`	`napster: viral sachde`
`12:36.42`	`eFfeM`	`and I am nowhere near my board, so can't give you mine`
`12:36.49`	`eFfeM`	`you can use setenv to set the defaults`
`12:37.03`	`napster`	`eFfeM, Unknown command resetenv`
`12:37.06`	`napster`	`!`
`12:37.52`	`eFfeM`	`hm, odd, you're doing this in u-boot ?`
`12:38.00`	`napster`	`Yes`
`12:38.05`	`napster`	`How can I make sure?`
`12:38.23`	`eFfeM`	`does printenv give something ?`
`12:38.28`	`napster`	`yes`
`12:38.43`	`eFfeM`	`ok, then i guess resetenv is not implemented`
`12:38.49`	`eFfeM`	`you still can do it the hard way:`
`12:38.59`	`eFfeM`	`setenv every var to the value needed`
`12:39.16`	`eFfeM`	`and if a var needs to go just setenv it without a value`
`12:39.16`	`napster`	`http://pastebin.com/gJhNQHTZ`
`12:39.41`	`napster`	`eFfeM, ok, what are the default values? Any idea?`
`12:39.54`	`eFfeM`	`guess the one in the thread above (for the 3rd time)`
`12:40.24`	`eFfeM`	`btw the fact that ethaddr is wrapped does not seem ok`
`12:40.24`	`napster`	`That give me the same error (for the 2nd time) :D`
`12:40.37`	`eFfeM`	`there seems to be a newline in it`
`12:40.43`	`eFfeM`	`try`
`12:40.45`	`napster`	`eFfeM, ohh may be`
`12:40.50`	`napster`	`letme try`
`12:41.02`	`eFfeM`	`setenv eethaddr 0a:c1:a8:12:fa:c0`
`12:41.09`	`eFfeM`	`sorry one e`
`12:41.28`	`eFfeM`	`setenv ï»¿ethaddr 0a:c1:a8:12:fa:c0`
`12:41.53`	`eFfeM`	`what is your probelm with uboot anyway`
`12:42.34`	`napster`	`eFfeM, I tried the steps in http://elinux.org/Hawkboard#Booting_Linux_Kernel_from_USB`
`12:43.25`	`eFfeM`	`yes, those work`
`12:43.32`	`eFfeM`	`i wrote that section`
`12:44.02`	`napster`	`An the output of the autoboot is : http://pastebin.com/gYrb3hb9`
`12:45.11`	`eFfeM`	`how is your usb stick connected ?`
`12:45.51`	`napster`	`on the board`
`12:46.00`	`napster`	`It has a usb port`
`12:46.03`	`eFfeM`	`which port`
`12:46.11`	`napster`	`bigger one :)`
`12:46.41`	`napster`	`eFfeM, Is that ok?`
`12:46.42`	`eFfeM`	`ok, can you read the first line from ï»¿ http://elinux.org/Hawkboard#Booting_Linux_Kernel_from_USB for me`
`12:46.45`	`eFfeM`	`:-)`
`12:47.28`	`eFfeM`	`u-boot does allow booting from USB, but only using the USB 2.0 mini connector. u-boot cannot boot from the USB 1.1 port (the standard A-type port), so you need to get yourself an adapter cable to go from the mini port to an A-female type. I think I got mine from ebay or dealextreme.`
`12:47.46`	`napster`	`eFfeM, Ohh my god!! Thats the uttermost this what a newbie can experience...!!! :(`
`12:47.53`	`eFfeM`	`:-)`
`12:47.54`	`eFfeM`	`np`
`12:48.16`	`napster`	`eFfeM, Sorry for the mistake...`
`12:48.16`	`eFfeM`	`we've all had this experience once in our life :-)`
`12:48.19`	`eFfeM`	`np`
`12:48.24`	`eFfeM`	`what part of india are you from ?`
`12:48.34`	`napster`	`I'm from kerala`
`12:48.47`	`napster`	`And you?`
`12:48.56`	`eFfeM`	`netherlands`
`12:48.57`	`eFfeM`	`biab`
`12:49.01`	`napster`	`ok`
`12:52.01`	`Gaston\|Home`	`Ill repeate the question from above: Have you guys seens that the hawkboard.org now reads "AM1808 / OMAP L 138 Open Community Portal" ?`
`12:52.40`	`Gaston\|Home`	`To me it seems that the AM1808 is roughly the same as the L138 minus DSP`
`12:53.31`	`Gaston\|Home`	`or are they the same chip but different names only?`
`12:53.48`	`eFfeM`	`re`
`12:54.15`	`eFfeM`	`think i saw the msg but didn't really notice the 1808 part`
`12:54.38`	`eFfeM`	`napster: i used to visit bangalore quite a lot in my previous job`
`12:54.50`	`napster`	`eFfeM, Ohh, and kerala>`
`12:55.37`	`eFfeM`	`never been there, only BLR (and delhi and mumbai airports`
`12:55.46`	`napster`	`eFfeM, ok`
`12:55.55`	`eFfeM`	`only weekend there we went to the temples in belur, halebud and shravanabelagola`
`12:56.30`	`napster`	`ok... What you do btw?`
`12:57.17`	`eFfeM`	`at that time I did sw for Philips consumer electronics`
`12:58.02`	`napster`	`ok`
`12:58.52`	`eFfeM`	`afk again`
`13:08.08`	`eFfeM`	`napster please note that i was able to boot from usb, but that i could not get a rootfs on it`
`13:08.44`	`napster`	`Ohh, then where did you put your rfs?`
`13:09.51`	`eFfeM`	`on a sata harddisk that I had lying around`
`13:11.18`	`eFfeM`	`you can also put the rootfs on sd`
`13:11.26`	`eFfeM`	`guess this is either a misconfig at my side or a kernel bug`
`13:12.10`	`napster`	`eFfeM, Do you have a few moments? I've a bunch of doubts...!`
`13:15.21`	`virals`	`eFfeM: i m work at bangalore`
`13:15.33`	`eFfeM`	`virals: for what company`
`13:15.58`	`eFfeM`	`napster, i'm at work, but shoot your doubts and I'll try to reply in some spare time`
`13:16.01`	`virals`	`NextBiT Computing nextbitcpu.com`
`13:24.11`	`eFfeM`	`virals, don't know them i think, will look up the url`
`13:24.26`	`eFfeM`	`btw for an even cheaper linux board than hawk have a look at http://shop.ngxtechnologies.com/product_info.php?products_id=72&osCsid=332ff6c7bf1e2947b9b55f3f1ef1dff4`
`13:24.54`	`eFfeM`	`rs 2750`
`13:25.17`	`virals`	`eFfeM:ya 180 MHz is not bad at all`
`13:25.17`	`napster`	`eFfeM, Q1 : Is there a simple way to reset all the environmental variables to the default values?`
`13:25.38`	`eFfeM`	`napster: normally that would be resetenv`
`13:25.50`	`eFfeM`	`but apparently it is not in the command set`
`13:26.08`	`napster`	`eFfeM, Can i install 'resetenv' ?`
`13:26.25`	`eFfeM`	`i probably would have build my own u-boot if the digital signing was not needed`
`13:26.40`	`eFfeM`	`napster: it'll require you to recompile u-boot`
`13:27.11`	`napster`	`eFfeM, I tried it on my pc, but has errors while compiling...`
`13:27.27`	`eFfeM`	`but if you know the env area you might be able to modify a byte, if i recall correctly there is a checksum on it and if that is not correct it resets to the default`
`13:27.41`	`eFfeM`	`or maybe under linux with u-boot-utils (hardly ever used that)`
`13:28.07`	`eFfeM`	`napster: i'd suggest with your knowledge to stay away from u-boot; if you brick your board it is going to be hard to recover`
`13:28.12`	`napster`	`eFfeM, checksum method sound good :) Can you elaborate?`
`13:28.42`	`eFfeM`	`the env area is somewhere in nand flash, don't know exactly where, but with uboot you can modify data or erase them`
`13:28.47`	`eFfeM`	`see the uboot manual`
`13:28.55`	`eFfeM`	`or help nand`
`13:29.04`	`eFfeM`	`first dump parts to see where it is then erase the sector`
`13:29.13`	`eFfeM`	`but take care not to wipe u-boot itslef`
`13:29.28`	`eFfeM`	`virals: looked at the web page, sounds nice`
`13:29.32`	`napster`	`Are you talking about the checksum method?`
`13:29.50`	`eFfeM`	`napster you can also erase the sector on disk and it will also use a default`
`13:30.05`	`eFfeM`	`but simplest is just setenv the vars to the default values`
`13:30.24`	`eFfeM`	`virals, i used to work on digital media adapters about 5 years ago`
`13:30.25`	`eFfeM`	`was fun`
`13:30.47`	`virals`	`eFfeM: good. so now a days wht u do ?`
`13:31.00`	`napster`	`eFfeM, ok, I'll frame the commands and show you...`
`13:32.36`	`eFfeM`	`napster what I typically do is type the commands in an editor and save them, then copy and paste them in u-boot`
`13:32.54`	`napster`	`eFfeM, Me too :)`
`13:33.08`	`eFfeM`	`i work for a company that does audio and video processing for broadcast industry (www.axon.tv)`
`13:33.46`	`virals`	`napster: you can set any (old / new / default) parameter manually & save it using saveenv command at u-boot prompt`
`13:34.12`	`napster`	`virals, ok`
`13:35.48`	`virals`	`eFfeM: Axon has good portfolio of products`
`13:35.59`	`eFfeM`	`yes`
`13:36.14`	`eFfeM`	`newer stuff is all linux based`
`13:36.26`	`napster`	`eFfeM, ethaddr is the MAC address?`
`13:36.33`	`eFfeM`	`btw also noted this: http://shop.ngxtechnologies.com/product_info.php?products_id=67 looks nice with the lcd`
`13:36.38`	`eFfeM`	`but can't run linux i fear`
`13:36.39`	`eFfeM`	`napster: yes`
`13:36.52`	`napster`	`ok`
`13:36.52`	`*** join/#hawkboard cmurillo (~cmurillo@200.122.155.113)`
`13:38.12`	`napster`	`eFfeM, http://pastebin.com/MtZkNRtz Does this looks ok?`
`13:38.56`	`eFfeM`	`no`
`13:39.13`	`eFfeM`	`bootcmd is the cmd to boot linux, bootargs is what you give the kernel as params`
`13:39.24`	`eFfeM`	`the other thigns like ethaddr are to be set separately`
`13:39.55`	`napster`	`eFfeM, I've changed bootcmd too`
`13:40.05`	`napster`	`Can you patch the commands I've framed?`
`13:43.23`	`eFfeM`	`napster: something like this: http://www.pastebin.ca/1829960`
`13:43.28`	`eFfeM`	`you might need to add a bootcmd`
`13:43.39`	`eFfeM`	`can't see what it is by default`
`13:44.11`	`napster`	`ok, I think its null by default`
`13:44.29`	`eFfeM`	`actually made typo: new version at http://www.pastebin.ca/1829962`
`13:44.40`	`eFfeM`	`have fun`
`13:44.48`	`eFfeM`	`need to go back to work now`
`13:45.27`	`virals`	`check http://pastebin.com/tDqWU4ci`
`13:45.36`	`eFfeM`	`napster: btw what I said with erasing the env is similar to what wdenk told you in u-boot`
`13:46.08`	`napster`	`eFfeM, Hmm, Can I try it or continue setting all of them?`
`13:46.29`	`eFfeM`	`virals looks good to me if you are using tftp and a kernel with an intramfs`
`13:46.30`	`virals`	`napster: first set all`
`13:46.39`	`napster`	`ok`
`13:46.58`	`eFfeM`	`if you make a mistake with the erase you can brick your board`
`13:47.06`	`eFfeM`	`and it will be touch to recover`
`13:47.17`	`virals`	`napster: how ur planing to load kernel`
`13:47.30`	`virals`	`from tftp ? from USB ? from SATA ?`
`13:47.33`	`napster`	`Trying to use a USB stick`
`13:47.45`	`virals`	`ohh`
`13:47.47`	`virals`	`sorry`
`13:48.03`	`virals`	`napster: arguments provided by me were for TFTP`
`13:48.42`	`napster`	`virals, which one?`
`13:48.48`	`virals`	`at http://pastebin.com/tDqWU4ci`
`13:48.50`	`eFfeM`	`for usb use the one form the elinux page`
`13:49.09`	`eFfeM`	`afk`
`13:49.38`	`napster`	`eFfeM, virals ok`
`13:52.17`	`virals`	`napster eFfeM ; i m going out.`
`13:52.35`	`napster`	`virals, See ya later :) Thanks for your help`
`13:52.37`	`virals`	`napster: hope you able to boot it properly, else do send email on mailing list`
`13:52.43`	`napster`	`ok`
`13:52.48`	`virals`	`napster: with as much details are possible`
`13:52.50`	`virals`	`:)`
`13:52.56`	`*** part/#hawkboard virals (~Viral_Sac@122.166.2.35)`
`14:01.15`	`napster`	`eFfeM, What is the env var bootcmd do?`
`14:01.44`	`napster`	`eFfeM, Setting them does not work`
`14:02.08`	`napster`	`eFfeM, I think its better to restore the board to boot from nand itself`
`14:03.03`	`napster`	`eFfeM, Can I try the other way by erasing the sector?`
`14:07.29`	`eFfeM`	`napster: bootcmd is the command that is executed when the board boots`
`14:07.48`	`eFfeM`	`and ofc you can try erasing the sector, but I doubt that it will help you much`
`14:07.54`	`eFfeM`	`actually lost what you want to achieve`
`14:08.19`	`eFfeM`	`virals and me already told you a few times how to reset the env to default value using setenv`
`14:08.29`	`napster`	`eFfeM, I think at the moment I can boot back to the NAND since I don't have the usb adapter :(`
`14:08.59`	`napster`	`eFfeM, So, can I try rollback the board to boot from NAND itself?`
`14:12.29`	`eFfeM`	`napster don't know where your board came from, but mine only had u-boot on it no linux`
`14:12.42`	`eFfeM`	`and the u-boot is still there in the nand if you can get to the cmd line`
`14:12.54`	`eFfeM`	`Gaston\|Home: in beagleboard ML koen says:`
`14:12.54`	`eFfeM`	`You can give the hawkboard a try, that has a OMAP-L138, which is a AM1808 with a DSP attached.`
`14:13.29`	`napster`	`eFfeM, There was linux on it AFAIK :( (my board is hawkboard OMAPL-138)`
`14:14.41`	`eFfeM`	`napster: mine is the same, came only with u-boot on it`
`14:14.43`	`Gaston\|Home`	`eFfeM : kind of strange that hawkboard.org is advertising itself as with or without DSP then, isnt it?`
`14:15.04`	`eFfeM`	`so can't help you with settings with boards that had different sw on it`
`14:15.25`	`eFfeM`	`Gaston\|Home: yeah maybe they are planning an even cheaper hawk with am1808`
`14:15.31`	`eFfeM`	`might be pin compatible`
`14:16.00`	`Gaston\|Home`	`could be, I guess Khasim is the one to ask`
`14:18.11`	`Gaston\|Home`	`I had the impression that Hawkboard would be focused around the floating point DSP.`
`14:22.48`	`Gaston\|Home`	`I'm surprised that there arent more comprehenxive material on how to use the DSP inside. I guess its not that important to TI and the producers of the board. For me it was the single most important thing that was different (and right) compared to other similar boards.`
`14:24.24`	`eFfeM`	`there are some snippets of info for beagleboard not sure if things work thesame here`
`14:57.19`	`*** join/#hawkboard virals (~viral@122.167.71.145)`
`15:11.14`	`*** join/#hawkboard ddompe (~ddompe@200.122.155.113)`
`16:10.07`	`chroos`	`i have big problems with configuring AISgen to make use of the ddr .. is someone known to that process?`
`16:42.54`	`*** join/#hawkboard napster (~napster@117.196.138.160)`
`16:46.46`	`*** part/#hawkboard franktango (~a0746747@nat/ti/x-pezlzvteoguubxpr)`
`17:21.23`	`napster`	`From where I can get a stable uImage?`

Generated by irclog2html.pl Modified by Tim Riker to work with infobot.