| 00:11.02 | *** join/#gpe dieg (n=postmast@81-172-38-128.usuarios.retecal.es) |
| 00:13.23 | dieg | would be difficult to make that gpe contacts and calendar import the data of a BT phone using SynML or something similar ? |
| 00:16.47 | pb_ | syncml would be a bit tricky (though not impossible, if you were prepared to write the software) |
| 00:16.57 | pb_ | gpe can already import contacts and calendar through vcard/ical format |
| 00:17.31 | dieg | : ) |
| 00:18.34 | jcole | can i mix .0.8.0 with .0.8.3? |
| 00:18.42 | pb_ | yes |
| 00:18.46 | jcole | ok |
| 00:20.59 | jcole | is there a deb-src is sources.list equiv for ipkg? how easy is it to build packages myself? are the tools similar to debian (apt-get source {package}, dpkg-buildpackage) ? |
| 00:41.30 | florian_ | jcole: its not that easy, but you can use a crosstoolchain or OpenEmbedded. |
| 00:52.30 | *** join/#gpe johnX (n=john@c-24-16-192-158.hsd1.wa.comcast.net) |
| 00:52.47 | *** join/#gpe jg (n=jg@gb.ja.218.7.revip.asianet.co.th) |
| 01:13.20 | jcole | florian_: ok |
| 01:14.29 | jcole | florian_: i read an article about ian murdock discussing arm improvement in debian... is there a plan to move off this ipkg concept? |
| 01:18.30 | florian_ | jcole: so far there is no plan to do this... |
| 01:21.28 | jcole | it would be awesome if a special ipkg "profile" could be added to each debian package |
| 01:22.42 | florian_ | that would be cool indeed... |
| 01:23.20 | jcole | i installed some gpe apps here in debian |
| 01:23.23 | jcole | x86 |
| 01:28.15 | florian_ | goor :-) |
| 01:28.19 | florian_ | eh good |
| 01:28.28 | florian_ | we need to update them... |
| 01:34.32 | florian_ | good night |
| 02:16.45 | vtowel | so, say kbdd says it sent a KEY_PRESSED uinput event for keycode 102. but then both keylaunch and xev behave as if keycode 110 was received. anyone have an idea what's going on? |
| 02:17.44 | vtowel | all other keycodes seem to pass through fine.. just 102 becomes 110 for some unknown reason |
| 02:28.28 | jcole | *sigh* |
| 02:29.45 | jcole | ok, firefox won't install because of dependency conflicts with 0.8.0 and 0.8.3... is there a browser in 0.8.3 that will run javascript? |
| 02:30.11 | csmanx | firefox ??? |
| 02:30.20 | csmanx | jcole: gpe-mini-browser does |
| 02:30.46 | csmanx | my question is, is there an openssl enabled browser available for gpe?? |
| 02:30.50 | jcole | jcole: javascript too? i had problems |
| 02:31.04 | csmanx | uhmm coo-coo |
| 02:32.01 | csmanx | vtowel: did you try to map pgup/pgdown keys ? |
| 02:33.57 | jcole | ftp://familiar.handhelds.org looks ver unorganized, lol... stuff scattered all over the place... needs some serious reorging and archiving |
| 02:35.25 | jcole | project gpe stuff is from 2003 |
| 02:35.26 | csmanx | the open source model has several flows |
| 02:35.59 | csmanx | it's our duty to go towards a formal procedure and best practices to make it successful |
| 02:36.12 | csmanx | like the redhat people |
| 02:38.10 | jcole | the base feed packages.gz file for v0.8.3 needs to be rebuilt... trying to install gnumeric-excel-plugin gives an older version |
| 02:38.33 | vtowel | csmanx: yeah, they're fine |
| 02:39.34 | vtowel | maybe I still just don't understand the relationship between kbdd's keycodes and X's keycodes.. |
| 02:40.51 | jcole | maybe firefox won't package up in 0.8.3 ... is there a status page(s) on handhelds.org somewhere that tells what auto-compiled (un)successful? |
| 02:43.01 | jcole | csmanx: ah, javascript works with gpe-mini-browser on some pages... it looks like the javascript was directing to a page with frames |
| 02:54.18 | jcole | can i run gpe apps in opie? |
| 02:55.13 | jcole | hmm, gimp doesn't work in 0.8.3.. |
| 03:24.35 | *** join/#gpe csmanx_ (n=csman@201.230.14.117) |
| 03:32.14 | *** join/#gpe aquadran_ (i=pablo@scummvm/undead/aquadran) |
| 03:56.17 | *** part/#gpe jcole (n=jcole@atlwebproxy2.core.hp.com) |
| 04:05.55 | *** join/#gpe csmanx (n=csman@201.230.182.108) |
| 04:54.36 | *** join/#gpe gdsx (i=xsdg@freenode/staff/xsdg) |
| 05:29.09 | *** join/#gpe Timelord0 (n=TL@4.78.4.43) |
| 05:59.01 | *** join/#gpe benplaut (n=benplaut@cpe-70-95-146-177.hawaii.res.rr.com) |
| 05:59.54 | benplaut | [Zaurus] From an end-user standpoint, what would be the difference between using OpenZaurus/GPE as apposed to vanilla pdaXrom, which uses the matchbox suite and several GPE tools |
| 06:16.21 | *** join/#gpe _law_ (n=law@mail.stiftadmont.at) |
| 06:41.23 | *** join/#gpe JiniDog (n=jini@G94eb.g.pppool.de) |
| 07:10.44 | *** join/#gpe kammicazze (n=kammi@dD5762520.access.telenet.be) |
| 08:38.51 | *** join/#gpe katossi (n=guillerm@dslb-084-062-131-011.pools.arcor-ip.net) |
| 08:39.48 | *** join/#gpe theturtle (n=theturtl@guiness.lifl.fr) |
| 08:43.35 | *** join/#gpe rob_w (n=bob@p85.212.181.113.tisdip.tiscali.de) |
| 08:48.12 | XorA | morning |
| 09:07.57 | _law_ | hi all |
| 09:08.20 | XorA | hi _law_ |
| 09:31.17 | *** join/#gpe ade|desk (n=adavey@194.200.143.249) |
| 09:55.03 | *** join/#gpe bedboi (n=bedboi@signserv.Signal.Uu.Se) |
| 09:55.04 | bedboi | hi there |
| 09:55.29 | bedboi | anyone knows how to statically link just one library to an application? |
| 09:56.39 | bedboi | i have an app that is linked against glib2.0 and another library (which is compiled as a shared library) |
| 09:57.03 | bedboi | i want the shared library to be statically linked |
| 10:15.34 | *** join/#gpe CraHan (n=CraHan@85.194.49.78) |
| 10:26.50 | *** join/#gpe JAV (n=JAV@105.Red-80-34-40.staticIP.rima-tde.net) |
| 10:46.41 | *** join/#gpe rob__w (n=bob@p85.212.188.145.tisdip.tiscali.de) |
| 10:56.24 | *** join/#gpe krokas (i=krokas@ppp83-237-11-228.pppoe.mtu-net.ru) |
| 11:21.55 | *** join/#gpe dc__ (n=dctanner@217.68.28.229) |
| 11:22.49 | *** join/#gpe shiyee (n=Shiyee@0x503e9598.abnxx4.adsl-dhcp.tele.dk) |
| 11:29.33 | _law_ | hi shiyee |
| 11:29.41 | shiyee | hi _law_ |
| 11:30.02 | _law_ | shiyee, does latest gaim sources work with your patches? |
| 11:31.19 | shiyee | _law_: i don't know, haven't tested it yet... i'm not sure if it can pay off, as familiar 0.8.3 should go out soon, and gaim-2.0 will probably be out before the next release |
| 11:32.32 | shiyee | and as it is, i can't update the cvs with the patches, because the patches will then not apply to the old version :-( |
| 11:35.38 | *** join/#gpe Timelord (n=TL@4.78.4.43) |
| 11:38.03 | *** join/#gpe Timelord0 (n=TL@4.78.4.43) |
| 11:38.03 | *** join/#gpe koen|away (i=koen@dominion.kabel.utwente.nl) |
| 11:38.03 | *** join/#gpe pb_ (n=pb@2002:5168:d214:1:a00:1fff:fe06:93c) |
| 11:38.03 | *** join/#gpe PaxAnima (n=petter@frankenstein.idi.ntnu.no) |
| 00:11.02 | *** join/#gpe dieg (n=postmast@81-172-38-128.usuarios.retecal.es) |
| 00:13.23 | dieg | would be difficult to make that gpe contacts and calendar import the data of a BT phone using SynML or something similar ? |
| 00:16.47 | pb_ | syncml would be a bit tricky (though not impossible, if you were prepared to write the software) |
| 00:16.57 | pb_ | gpe can already import contacts and calendar through vcard/ical format |
| 00:17.31 | dieg | : ) |
| 00:18.34 | jcole | can i mix .0.8.0 with .0.8.3? |
| 00:18.42 | pb_ | yes |
| 00:18.46 | jcole | ok |
| 00:20.59 | jcole | is there a deb-src is sources.list equiv for ipkg? how easy is it to build packages myself? are the tools similar to debian (apt-get source {package}, dpkg-buildpackage) ? |
| 00:41.30 | florian_ | jcole: its not that easy, but you can use a crosstoolchain or OpenEmbedded. |
| 00:52.30 | *** join/#gpe johnX (n=john@c-24-16-192-158.hsd1.wa.comcast.net) |
| 00:52.47 | *** join/#gpe jg (n=jg@gb.ja.218.7.revip.asianet.co.th) |
| 01:13.20 | jcole | florian_: ok |
| 01:14.29 | jcole | florian_: i read an article about ian murdock discussing arm improvement in debian... is there a plan to move off this ipkg concept? |
| 01:18.30 | florian_ | jcole: so far there is no plan to do this... |
| 01:21.28 | jcole | it would be awesome if a special ipkg "profile" could be added to each debian package |
| 01:22.42 | florian_ | that would be cool indeed... |
| 01:23.20 | jcole | i installed some gpe apps here in debian |
| 01:23.23 | jcole | x86 |
| 01:28.15 | florian_ | goor :-) |
| 01:28.19 | florian_ | eh good |
| 01:28.28 | florian_ | we need to update them... |
| 01:34.32 | florian_ | good night |
| 02:16.45 | vtowel | so, say kbdd says it sent a KEY_PRESSED uinput event for keycode 102. but then both keylaunch and xev behave as if keycode 110 was received. anyone have an idea what's going on? |
| 02:17.44 | vtowel | all other keycodes seem to pass through fine.. just 102 becomes 110 for some unknown reason |
| 02:28.28 | jcole | *sigh* |
| 02:29.45 | jcole | ok, firefox won't install because of dependency conflicts with 0.8.0 and 0.8.3... is there a browser in 0.8.3 that will run javascript? |
| 02:30.11 | csmanx | firefox ??? |
| 02:30.20 | csmanx | jcole: gpe-mini-browser does |
| 02:30.46 | csmanx | my question is, is there an openssl enabled browser available for gpe?? |
| 02:30.50 | jcole | jcole: javascript too? i had problems |
| 02:31.04 | csmanx | uhmm coo-coo |
| 02:32.01 | csmanx | vtowel: did you try to map pgup/pgdown keys ? |
| 02:33.57 | jcole | ftp://familiar.handhelds.org looks ver unorganized, lol... stuff scattered all over the place... needs some serious reorging and archiving |
| 02:35.25 | jcole | project gpe stuff is from 2003 |
| 02:35.26 | csmanx | the open source model has several flows |
| 02:35.59 | csmanx | it's our duty to go towards a formal procedure and best practices to make it successful |
| 02:36.12 | csmanx | like the redhat people |
| 02:38.10 | jcole | the base feed packages.gz file for v0.8.3 needs to be rebuilt... trying to install gnumeric-excel-plugin gives an older version |
| 02:38.33 | vtowel | csmanx: yeah, they're fine |
| 02:39.34 | vtowel | maybe I still just don't understand the relationship between kbdd's keycodes and X's keycodes.. |
| 02:40.51 | jcole | maybe firefox won't package up in 0.8.3 ... is there a status page(s) on handhelds.org somewhere that tells what auto-compiled (un)successful? |
| 02:43.01 | jcole | csmanx: ah, javascript works with gpe-mini-browser on some pages... it looks like the javascript was directing to a page with frames |
| 02:54.18 | jcole | can i run gpe apps in opie? |
| 02:55.13 | jcole | hmm, gimp doesn't work in 0.8.3.. |
| 03:24.35 | *** join/#gpe csmanx_ (n=csman@201.230.14.117) |
| 03:32.14 | *** join/#gpe aquadran_ (i=pablo@scummvm/undead/aquadran) |
| 03:56.17 | *** part/#gpe jcole (n=jcole@atlwebproxy2.core.hp.com) |
| 04:05.55 | *** join/#gpe csmanx (n=csman@201.230.182.108) |
| 04:54.36 | *** join/#gpe gdsx (i=xsdg@freenode/staff/xsdg) |
| 05:29.09 | *** join/#gpe Timelord0 (n=TL@4.78.4.43) |
| 05:59.01 | *** join/#gpe benplaut (n=benplaut@cpe-70-95-146-177.hawaii.res.rr.com) |
| 05:59.54 | benplaut | [Zaurus] From an end-user standpoint, what would be the difference between using OpenZaurus/GPE as apposed to vanilla pdaXrom, which uses the matchbox suite and several GPE tools |
| 06:16.21 | *** join/#gpe _law_ (n=law@mail.stiftadmont.at) |
| 06:41.23 | *** join/#gpe JiniDog (n=jini@G94eb.g.pppool.de) |
| 07:10.44 | *** join/#gpe kammicazze (n=kammi@dD5762520.access.telenet.be) |
| 08:38.51 | *** join/#gpe katossi (n=guillerm@dslb-084-062-131-011.pools.arcor-ip.net) |
| 08:39.48 | *** join/#gpe theturtle (n=theturtl@guiness.lifl.fr) |
| 08:43.35 | *** join/#gpe rob_w (n=bob@p85.212.181.113.tisdip.tiscali.de) |
| 08:48.12 | XorA | morning |
| 09:07.57 | _law_ | hi all |
| 09:08.20 | XorA | hi _law_ |
| 09:31.17 | *** join/#gpe ade|desk (n=adavey@194.200.143.249) |
| 09:55.03 | *** join/#gpe bedboi (n=bedboi@signserv.Signal.Uu.Se) |
| 09:55.04 | bedboi | hi there |
| 09:55.29 | bedboi | anyone knows how to statically link just one library to an application? |
| 09:56.39 | bedboi | i have an app that is linked against glib2.0 and another library (which is compiled as a shared library) |
| 09:57.03 | bedboi | i want the shared library to be statically linked |
| 10:15.34 | *** join/#gpe CraHan (n=CraHan@85.194.49.78) |
| 10:26.50 | *** join/#gpe JAV (n=JAV@105.Red-80-34-40.staticIP.rima-tde.net) |
| 10:46.41 | *** join/#gpe rob__w (n=bob@p85.212.188.145.tisdip.tiscali.de) |
| 10:56.24 | *** join/#gpe krokas (i=krokas@ppp83-237-11-228.pppoe.mtu-net.ru) |
| 11:21.55 | *** join/#gpe dc__ (n=dctanner@217.68.28.229) |
| 11:22.49 | *** join/#gpe shiyee (n=Shiyee@0x503e9598.abnxx4.adsl-dhcp.tele.dk) |
| 11:29.33 | _law_ | hi shiyee |
| 11:29.41 | shiyee | hi _law_ |
| 11:30.02 | _law_ | shiyee, does latest gaim sources work with your patches? |
| 11:31.19 | shiyee | _law_: i don't know, haven't tested it yet... i'm not sure if it can pay off, as familiar 0.8.3 should go out soon, and gaim-2.0 will probably be out before the next release |
| 11:32.32 | shiyee | and as it is, i can't update the cvs with the patches, because the patches will then not apply to the old version :-( |
| 11:35.38 | *** join/#gpe Timelord (n=TL@4.78.4.43) |
| 11:38.03 | *** join/#gpe Timelord0 (n=TL@4.78.4.43) |
| 11:38.03 | *** join/#gpe koen|away (i=koen@dominion.kabel.utwente.nl) |
| 11:38.03 | *** join/#gpe pb_ (n=pb@2002:5168:d214:1:a00:1fff:fe06:93c) |
| 11:38.03 | *** join/#gpe PaxAnima (n=petter@frankenstein.idi.ntnu.no) |
| 11:41.30 | *** join/#gpe zecke (n=ich@rosine78.inf.fu-berlin.de) |
| 12:14.47 | *** join/#gpe katossi_uni (n=guillerm@linkwood.informatik.uni-duisburg.de) |
| 12:20.58 | *** join/#gpe Ge0rgy (n=Christop@dslb-084-057-157-101.pools.arcor-ip.net) |
| 12:23.25 | *** join/#gpe JiniDog (n=jini@Ga392.g.pppool.de) |
| 13:00.05 | *** join/#gpe lardman|work (n=lardman@138.38.73.178) |
| 13:06.01 | *** join/#gpe flowolf (i=nobody@host66-154.pool8253.interbusiness.it) |
| 13:06.05 | flowolf | hi all |
| 13:10.37 | *** join/#gpe florian_kc (n=fuchs@dns.kernelconcepts.de) |
| 13:10.53 | florian_kc | hi |
| 13:27.02 | *** join/#gpe zecke (n=ich@145.253.107.2) |
| 13:31.17 | *** join/#gpe lolita__ (n=Matthias@dyn166115.wlan.jku.at) |
| 14:15.15 | *** join/#gpe katossi (n=guillerm@dslb-084-062-147-129.pools.arcor-ip.net) |
| 14:21.09 | *** join/#gpe jg (n=jg@gb.ja.218.7.revip.asianet.co.th) |
| 14:30.54 | *** join/#gpe dc__ (n=dctanner@217.68.28.229) |
| 14:37.37 | florian_kc | pb_: I finally decided to update my OE build stuff here... that should make it easier to add new GPE bbs and maintain this stuff properly. |
| 15:20.46 | *** join/#gpe vtowel (n=paul@69.158.186.229) |
| 15:26.21 | vtowel_ | does anyone here know how kbdd keycodes get mapped to X11 keycodes? |
| 15:26.59 | vtowel_ | for instance, when I press the End key, kbdd says it sent code 107, but xev says it received code 115. |
| 15:27.41 | *** join/#gpe petterhj (n=TESTID@host-81-191-111-34.bluecom.no) |
| 15:27.56 | vtowel_ | and when I press the Home key, kbdd says it sent code 102, but sev says it received code 110 |
| 15:28.08 | vtowel_ | *xev not sev |
| 15:28.23 | vtowel_ | i just don't know where this mapping takes place |
| 15:35.28 | florian_kc | vtowel_: x11 does this... iirc kbdd generates input events. |
| 15:36.51 | vtowel_ | florian_kc: right. so are they hardcoded or something? it seems to be before xmodmap does anything, because I can't find anything in /etc/X11 that shows this mapping |
| 15:37.21 | *** join/#gpe helgoman (n=helgoman@dslb-082-083-062-041.pools.arcor-ip.net) |
| 15:38.03 | vtowel_ | but maybe the mapping is fine, seeing as how the difference between the X versions and kbdd version of both the End of Home keys is 8. it's just the Home key that triggers the same X event as the iTask key |
| 15:38.07 | florian_kc | vtowel_: there should be a pile of xmodmap files there, but they only provide some non-default stuff. |
| 15:38.12 | vtowel_ | right |
| 15:38.40 | florian_kc | vtowel_: maybe its just xbdd generating some wrong events... |
| 15:39.09 | florian_kc | vtowel_: worst case mail nilsf, he wrote that thingy. |
| 15:40.15 | vtowel_ | florian_kc: no, it's generating the right events according to the keycode spec for uinput. i've been in touch with Paul Eggleton, he has no clue |
| 15:40.31 | vtowel_ | florian_kc: besides, I'm the one who wrote the kbdd driver for my particular keyboard |
| 15:41.06 | vtowel_ | florian_kc: but now i'm thinking maybe the iTask key is sending the wrong keycode; i'm going to ask the hx4700 folks |
| 15:42.18 | florian_kc | vtowel_: ah cool... then its maybe just that mapping missing in the keymap for your device. |
| 15:42.51 | vtowel_ | florian_kc: possibly. i think i have a better idea now.. |
| 15:43.12 | florian_kc | vtowel_: ...especially because this key is usually not present on your device. |
| 15:45.44 | *** join/#gpe petterhj (n=TESTID@host-81-191-111-34.bluecom.no) |
| 15:56.37 | *** join/#gpe pH5 (n=ph5@e178231001.adsl.alicedsl.de) |
| 16:09.15 | *** join/#gpe JiniDog (n=jini@Ga392.g.pppool.de) |
| 16:22.48 | *** join/#gpe XorA_ (n=dp@81-179-224-143.dsl.pipex.com) |
| 16:37.55 | *** join/#gpe XorA (n=dp@81-179-226-115.dsl.pipex.com) |
| 16:45.01 | *** join/#gpe petterhj (n=TESTID@host-81-191-111-34.bluecom.no) |
| 16:58.42 | *** join/#gpe XorA_ (n=dp@81-179-234-105.dsl.pipex.com) |
| 17:52.19 | *** join/#gpe katossi (n=guillerm@dslb-084-062-147-129.pools.arcor-ip.net) |
| 17:53.37 | *** join/#gpe zecke (n=ich@88.134.17.97) |
| 17:58.15 | *** join/#gpe iclem|away (n=clement@iclem.net) |
| 18:05.33 | *** join/#gpe Cwiiis[uni] (n=cil103@romsey.ecs.soton.ac.uk) |
| 18:14.13 | *** join/#gpe katossi (n=guillerm@dslb-084-062-147-129.pools.arcor-ip.net) |
| 00:11.02 | *** join/#gpe dieg (n=postmast@81-172-38-128.usuarios.retecal.es) |
| 00:13.23 | dieg | would be difficult to make that gpe contacts and calendar import the data of a BT phone using SynML or something similar ? |
| 00:16.47 | pb_ | syncml would be a bit tricky (though not impossible, if you were prepared to write the software) |
| 00:16.57 | pb_ | gpe can already import contacts and calendar through vcard/ical format |
| 00:17.31 | dieg | : ) |
| 00:18.34 | jcole | can i mix .0.8.0 with .0.8.3? |
| 00:18.42 | pb_ | yes |
| 00:18.46 | jcole | ok |
| 00:20.59 | jcole | is there a deb-src is sources.list equiv for ipkg? how easy is it to build packages myself? are the tools similar to debian (apt-get source {package}, dpkg-buildpackage) ? |
| 00:41.30 | florian_ | jcole: its not that easy, but you can use a crosstoolchain or OpenEmbedded. |
| 00:52.30 | *** join/#gpe johnX (n=john@c-24-16-192-158.hsd1.wa.comcast.net) |
| 00:52.47 | *** join/#gpe jg (n=jg@gb.ja.218.7.revip.asianet.co.th) |
| 01:13.20 | jcole | florian_: ok |
| 01:14.29 | jcole | florian_: i read an article about ian murdock discussing arm improvement in debian... is there a plan to move off this ipkg concept? |
| 01:18.30 | florian_ | jcole: so far there is no plan to do this... |
| 01:21.28 | jcole | it would be awesome if a special ipkg "profile" could be added to each debian package |
| 01:22.42 | florian_ | that would be cool indeed... |
| 01:23.20 | jcole | i installed some gpe apps here in debian |
| 01:23.23 | jcole | x86 |
| 01:28.15 | florian_ | goor :-) |
| 01:28.19 | florian_ | eh good |
| 01:28.28 | florian_ | we need to update them... |
| 01:34.32 | florian_ | good night |
| 02:16.45 | vtowel | so, say kbdd says it sent a KEY_PRESSED uinput event for keycode 102. but then both keylaunch and xev behave as if keycode 110 was received. anyone have an idea what's going on? |
| 02:17.44 | vtowel | all other keycodes seem to pass through fine.. just 102 becomes 110 for some unknown reason |
| 02:28.28 | jcole | *sigh* |
| 02:29.45 | jcole | ok, firefox won't install because of dependency conflicts with 0.8.0 and 0.8.3... is there a browser in 0.8.3 that will run javascript? |
| 02:30.11 | csmanx | firefox ??? |
| 02:30.20 | csmanx | jcole: gpe-mini-browser does |
| 02:30.46 | csmanx | my question is, is there an openssl enabled browser available for gpe?? |
| 02:30.50 | jcole | jcole: javascript too? i had problems |
| 02:31.04 | csmanx | uhmm coo-coo |
| 02:32.01 | csmanx | vtowel: did you try to map pgup/pgdown keys ? |
| 02:33.57 | jcole | ftp://familiar.handhelds.org looks ver unorganized, lol... stuff scattered all over the place... needs some serious reorging and archiving |
| 02:35.25 | jcole | project gpe stuff is from 2003 |
| 02:35.26 | csmanx | the open source model has several flows |
| 02:35.59 | csmanx | it's our duty to go towards a formal procedure and best practices to make it successful |
| 02:36.12 | csmanx | like the redhat people |
| 02:38.10 | jcole | the base feed packages.gz file for v0.8.3 needs to be rebuilt... trying to install gnumeric-excel-plugin gives an older version |
| 02:38.33 | vtowel | csmanx: yeah, they're fine |
| 02:39.34 | vtowel | maybe I still just don't understand the relationship between kbdd's keycodes and X's keycodes.. |
| 02:40.51 | jcole | maybe firefox won't package up in 0.8.3 ... is there a status page(s) on handhelds.org somewhere that tells what auto-compiled (un)successful? |
| 02:43.01 | jcole | csmanx: ah, javascript works with gpe-mini-browser on some pages... it looks like the javascript was directing to a page with frames |
| 02:54.18 | jcole | can i run gpe apps in opie? |
| 02:55.13 | jcole | hmm, gimp doesn't work in 0.8.3.. |
| 03:24.35 | *** join/#gpe csmanx_ (n=csman@201.230.14.117) |
| 03:32.14 | *** join/#gpe aquadran_ (i=pablo@scummvm/undead/aquadran) |
| 03:56.17 | *** part/#gpe jcole (n=jcole@atlwebproxy2.core.hp.com) |
| 04:05.55 | *** join/#gpe csmanx (n=csman@201.230.182.108) |
| 04:54.36 | *** join/#gpe gdsx (i=xsdg@freenode/staff/xsdg) |
| 05:29.09 | *** join/#gpe Timelord0 (n=TL@4.78.4.43) |
| 05:59.01 | *** join/#gpe benplaut (n=benplaut@cpe-70-95-146-177.hawaii.res.rr.com) |
| 05:59.54 | benplaut | [Zaurus] From an end-user standpoint, what would be the difference between using OpenZaurus/GPE as apposed to vanilla pdaXrom, which uses the matchbox suite and several GPE tools |
| 06:16.21 | *** join/#gpe _law_ (n=law@mail.stiftadmont.at) |
| 06:41.23 | *** join/#gpe JiniDog (n=jini@G94eb.g.pppool.de) |
| 07:10.44 | *** join/#gpe kammicazze (n=kammi@dD5762520.access.telenet.be) |
| 08:38.51 | *** join/#gpe katossi (n=guillerm@dslb-084-062-131-011.pools.arcor-ip.net) |
| 08:39.48 | *** join/#gpe theturtle (n=theturtl@guiness.lifl.fr) |
| 08:43.35 | *** join/#gpe rob_w (n=bob@p85.212.181.113.tisdip.tiscali.de) |
| 08:48.12 | XorA | morning |
| 09:07.57 | _law_ | hi all |
| 09:08.20 | XorA | hi _law_ |
| 09:31.17 | *** join/#gpe ade|desk (n=adavey@194.200.143.249) |
| 09:55.03 | *** join/#gpe bedboi (n=bedboi@signserv.Signal.Uu.Se) |
| 09:55.04 | bedboi | hi there |
| 09:55.29 | bedboi | anyone knows how to statically link just one library to an application? |
| 09:56.39 | bedboi | i have an app that is linked against glib2.0 and another library (which is compiled as a shared library) |
| 09:57.03 | bedboi | i want the shared library to be statically linked |
| 10:15.34 | *** join/#gpe CraHan (n=CraHan@85.194.49.78) |
| 10:26.50 | *** join/#gpe JAV (n=JAV@105.Red-80-34-40.staticIP.rima-tde.net) |
| 10:46.41 | *** join/#gpe rob__w (n=bob@p85.212.188.145.tisdip.tiscali.de) |
| 10:56.24 | *** join/#gpe krokas (i=krokas@ppp83-237-11-228.pppoe.mtu-net.ru) |
| 11:21.55 | *** join/#gpe dc__ (n=dctanner@217.68.28.229) |
| 11:22.49 | *** join/#gpe shiyee (n=Shiyee@0x503e9598.abnxx4.adsl-dhcp.tele.dk) |
| 11:29.33 | _law_ | hi shiyee |
| 11:29.41 | shiyee | hi _law_ |
| 11:30.02 | _law_ | shiyee, does latest gaim sources work with your patches? |
| 11:31.19 | shiyee | _law_: i don't know, haven't tested it yet... i'm not sure if it can pay off, as familiar 0.8.3 should go out soon, and gaim-2.0 will probably be out before the next release |
| 11:32.32 | shiyee | and as it is, i can't update the cvs with the patches, because the patches will then not apply to the old version :-( |
| 11:35.38 | *** join/#gpe Timelord (n=TL@4.78.4.43) |
| 11:38.03 | *** join/#gpe Timelord0 (n=TL@4.78.4.43) |
| 11:38.03 | *** join/#gpe koen|away (i=koen@dominion.kabel.utwente.nl) |
| 11:38.03 | *** join/#gpe pb_ (n=pb@2002:5168:d214:1:a00:1fff:fe06:93c) |
| 11:38.03 | *** join/#gpe PaxAnima (n=petter@frankenstein.idi.ntnu.no) |
| 11:41.30 | *** join/#gpe zecke (n=ich@rosine78.inf.fu-berlin.de) |
| 12:14.47 | *** join/#gpe katossi_uni (n=guillerm@linkwood.informatik.uni-duisburg.de) |
| 12:20.58 | *** join/#gpe Ge0rgy (n=Christop@dslb-084-057-157-101.pools.arcor-ip.net) |
| 12:23.25 | *** join/#gpe JiniDog (n=jini@Ga392.g.pppool.de) |
| 13:00.05 | *** join/#gpe lardman|work (n=lardman@138.38.73.178) |
| 13:06.01 | *** join/#gpe flowolf (i=nobody@host66-154.pool8253.interbusiness.it) |
| 13:06.05 | flowolf | hi all |
| 13:10.37 | *** join/#gpe florian_kc (n=fuchs@dns.kernelconcepts.de) |
| 13:10.53 | florian_kc | hi |
| 13:27.02 | *** join/#gpe zecke (n=ich@145.253.107.2) |
| 13:31.17 | *** join/#gpe lolita__ (n=Matthias@dyn166115.wlan.jku.at) |
| 14:15.15 | *** join/#gpe katossi (n=guillerm@dslb-084-062-147-129.pools.arcor-ip.net) |
| 14:21.09 | *** join/#gpe jg (n=jg@gb.ja.218.7.revip.asianet.co.th) |
| 14:30.54 | *** join/#gpe dc__ (n=dctanner@217.68.28.229) |
| 14:37.37 | florian_kc | pb_: I finally decided to update my OE build stuff here... that should make it easier to add new GPE bbs and maintain this stuff properly. |
| 15:20.46 | *** join/#gpe vtowel (n=paul@69.158.186.229) |
| 15:26.21 | vtowel_ | does anyone here know how kbdd keycodes get mapped to X11 keycodes? |
| 15:26.59 | vtowel_ | for instance, when I press the End key, kbdd says it sent code 107, but xev says it received code 115. |
| 15:27.41 | *** join/#gpe petterhj (n=TESTID@host-81-191-111-34.bluecom.no) |
| 15:27.56 | vtowel_ | and when I press the Home key, kbdd says it sent code 102, but sev says it received code 110 |
| 15:28.08 | vtowel_ | *xev not sev |
| 15:28.23 | vtowel_ | i just don't know where this mapping takes place |
| 15:35.28 | florian_kc | vtowel_: x11 does this... iirc kbdd generates input events. |
| 15:36.51 | vtowel_ | florian_kc: right. so are they hardcoded or something? it seems to be before xmodmap does anything, because I can't find anything in /etc/X11 that shows this mapping |
| 15:37.21 | *** join/#gpe helgoman (n=helgoman@dslb-082-083-062-041.pools.arcor-ip.net) |
| 15:38.03 | vtowel_ | but maybe the mapping is fine, seeing as how the difference between the X versions and kbdd version of both the End of Home keys is 8. it's just the Home key that triggers the same X event as the iTask key |
| 15:38.07 | florian_kc | vtowel_: there should be a pile of xmodmap files there, but they only provide some non-default stuff. |
| 15:38.12 | vtowel_ | right |
| 15:38.40 | florian_kc | vtowel_: maybe its just xbdd generating some wrong events... |
| 15:39.09 | florian_kc | vtowel_: worst case mail nilsf, he wrote that thingy. |
| 15:40.15 | vtowel_ | florian_kc: no, it's generating the right events according to the keycode spec for uinput. i've been in touch with Paul Eggleton, he has no clue |
| 15:40.31 | vtowel_ | florian_kc: besides, I'm the one who wrote the kbdd driver for my particular keyboard |
| 15:41.06 | vtowel_ | florian_kc: but now i'm thinking maybe the iTask key is sending the wrong keycode; i'm going to ask the hx4700 folks |
| 15:42.18 | florian_kc | vtowel_: ah cool... then its maybe just that mapping missing in the keymap for your device. |
| 15:42.51 | vtowel_ | florian_kc: possibly. i think i have a better idea now.. |
| 15:43.12 | florian_kc | vtowel_: ...especially because this key is usually not present on your device. |
| 15:45.44 | *** join/#gpe petterhj (n=TESTID@host-81-191-111-34.bluecom.no) |
| 15:56.37 | *** join/#gpe pH5 (n=ph5@e178231001.adsl.alicedsl.de) |
| 16:09.15 | *** join/#gpe JiniDog (n=jini@Ga392.g.pppool.de) |
| 16:22.48 | *** join/#gpe XorA_ (n=dp@81-179-224-143.dsl.pipex.com) |
| 16:37.55 | *** join/#gpe XorA (n=dp@81-179-226-115.dsl.pipex.com) |
| 16:45.01 | *** join/#gpe petterhj (n=TESTID@host-81-191-111-34.bluecom.no) |
| 16:58.42 | *** join/#gpe XorA_ (n=dp@81-179-234-105.dsl.pipex.com) |
| 17:52.19 | *** join/#gpe katossi (n=guillerm@dslb-084-062-147-129.pools.arcor-ip.net) |
| 17:53.37 | *** join/#gpe zecke (n=ich@88.134.17.97) |
| 17:58.15 | *** join/#gpe iclem|away (n=clement@iclem.net) |
| 18:05.33 | *** join/#gpe Cwiiis[uni] (n=cil103@romsey.ecs.soton.ac.uk) |
| 18:14.13 | *** join/#gpe katossi (n=guillerm@dslb-084-062-147-129.pools.arcor-ip.net) |
| 18:16.55 | *** join/#gpe Cwiiis[uni] (n=cil103@romsey.ecs.soton.ac.uk) |
| 18:17.17 | *** join/#gpe Cwiiis[uni] (n=cil103@romsey.ecs.soton.ac.uk) |
| 18:18.10 | *** join/#gpe beewoolie-afk (n=beewooli@206.124.142.26) |
| 18:44.37 | *** join/#gpe Cwiiis[uni] (n=cil103@romsey.ecs.soton.ac.uk) |
| 18:56.06 | florian_kc | libgpewidget-0.106-r0: task do_package: completed |
| 19:00.59 | *** join/#gpe krokas (i=krokas@ppp83-237-11-44.pppoe.mtu-net.ru) |
| 19:03.46 | florian_kc | hi krokas |
| 19:04.00 | florian_kc | pb_: You have pkg-config 0.16, right? |
| 19:05.01 | *** join/#gpe pigeon (n=pigeon@adsl-60-232.swiftdsl.com.au) |
| 19:05.19 | krokas | hi florian_kc |
| 19:06.47 | *** join/#gpe bedboi (n=bedboi@signserv.Signal.Uu.Se) |
| 19:09.37 | florian_kc | hi bedboi |
| 19:11.27 | florian_kc | bbl |
| 19:21.09 | *** join/#gpe XorA|gon1 (n=dp@81-178-94-187.dsl.pipex.com) |
| 19:42.32 | *** join/#gpe law_ (n=_law_@213.173.86.202) |
| 19:43.59 | law_ | found an opera 8.5 screenshot how is the lucky one? |
| 19:44.25 | law_ | http://handhelds.org/scap/port.13632.png |
| 19:47.52 | *** join/#gpe krokas (i=krokas@ppp83-237-242-139.pppoe.mtu-net.ru) |
| 19:55.07 | *** join/#gpe CraHan (n=CraHan@167-9.244.81.adsl.skynet.be) |
| 20:05.41 | *** join/#gpe katossi_uni (n=guillerm@linkwood.informatik.uni-duisburg.de) |
| 20:36.52 | *** join/#gpe florian (n=fuchs@p5083A211.dip0.t-ipconnect.de) |
| 20:36.59 | florian | re |
| 20:37.17 | pb_ | florian: good evening! |
| 20:37.23 | pb_ | florian: I have pkg-config 0.20, in fact. |
| 20:37.42 | florian | pb_: hi |
| 20:38.06 | florian | pb_: aha... thats why oe doesn't like it. |
| 20:38.23 | florian | s/it/libgpewidget |
| 20:38.28 | pb_ | right |
| 20:38.33 | pb_ | is pkg-config in oe older than that? |
| 20:38.36 | pb_ | or newer? |
| 20:38.57 | pb_ | florian: by the way, another thing I have is a patch to stop matchbox-panel polling all the time. |
| 20:39.00 | pb_ | http://handhelds.org/~pb/mb-panel-0.9.2-polling.patch |
| 20:39.40 | florian | pb_: older... let me try to add 0.20 - 0.19 didn't work out of the box |
| 20:39.45 | pb_ | righto |
| 20:39.49 | florian | pb_: oh cool |
| 20:40.18 | pb_ | florian: I didn't test the patch terribly much, but it seems to work on my laptop |
| 20:46.23 | florian | pb_: sounds like job for the update feed |
| 20:46.35 | pb_ | yeah |
| 20:46.50 | pb_ | my oe setup is still in a state of disrepair. would you mind building the packages? |
| 20:47.13 | pb_ | I checked out a tree from zecke's darcs thing, but I am in some kind of quilt-related hell. |
| 20:47.44 | florian | i have a new one now... unfortunately the first try failed: libgpewidget |
| 20:52.38 | *** join/#gpe bedboi (i=bedboi@217.201.3.5) |
| 20:53.35 | florian | pb_: uh... we have 0.15 i noe |
| 20:54.47 | florian | bedboi: wb |
| 20:55.08 | bedboi | hi florian |
| 20:55.12 | bedboi | any fresh news? |
| 20:56.07 | florian | hmm not really.. |
| 20:56.27 | *** join/#gpe katossi (n=guillerm@dslb-084-062-147-129.pools.arcor-ip.net) |
| 20:56.38 | florian | Oh that reminds me that someone discovered a metod to make gpe-calendar die. |
| 20:57.39 | bedboi | what's that? |
| 20:57.44 | bedboi | hmm |
| 20:57.49 | bedboi | i need to compile xstroke |
| 20:57.55 | bedboi | but i can't find sources |
| 20:58.25 | florian | http://xstroke.org/releases/xstroke-0.6.tar.gz |
| 20:59.32 | bedboi | unfortunately, xstroke.org domain is not up |
| 20:59.38 | *** join/#gpe zap (n=zap@217.170.93.9) |
| 21:00.04 | florian | nasty... |
| 21:00.38 | shiyee | bedboi: i found my xstroke.tar.gz on google |
| 21:08.13 | bedboi | where? |
| 21:08.16 | bedboi | please |
| 21:10.23 | *** join/#gpe johnX (n=john@c-24-16-192-158.hsd1.wa.comcast.net) |
| 21:12.11 | florian | bedboi: www.kernelconcepts.de/~fuchs/files/xstroke-0.6.tar.gz |
| 21:13.02 | pb_ | florian: oh dear, what's the gpe-calendar thing? |
| 21:13.47 | *** join/#gpe lolita__ (n=Matthias@dyn166115.wlan.jku.at) |
| 21:14.12 | florian | pb_: something - maybe libschedule - runs in an endless loop on the 770. i suppose its triggered by the missing atd |
| 21:16.15 | pb_ | florian: oh dear, that is bad |
| 21:16.20 | pb_ | can you strace the looping process? |
| 21:16.55 | florian | okay... we need to patch configure of pkg-config |
| 21:18.25 | florian | pb_: i'll try to reproduce this in the sdk as soon as i have pkg-config in place |
| 21:18.30 | pb_ | okay, cool |
| 21:21.23 | pb_ | I wonder why pkg-config is causing such a problem. |
| 21:21.46 | florian | pb_: it seems to miss some glib related stuff |
| 21:22.27 | florian | | glib.m4:8: warning: underquoted definition of AM_PATH_GLIB |
| 21:22.27 | florian | | run info '(automake)Extending aclocal' |
| 21:22.27 | florian | | or see http://sources.redhat.com/automake/automake.html#Extending-aclocal |
| 21:22.27 | florian | | acglib.m4:13: warning: underquoted definition of GLIB_IF_VAR_EQ |
| 21:22.47 | pb_ | that's okay. those warnings are harmless. |
| 21:23.07 | florian | indeed - the fatal one is this: |
| 21:23.10 | pb_ | it just means that the glib.m4 bits (which I think come from glib-1.2) are a bit outdated |
| 21:23.18 | florian | | acglib.m4:13: error: m4_defn: undefined macro: _m4_divert_diversion |
| 21:23.42 | pb_ | ah, that's not good |
| 21:25.47 | pb_ | hm. I wonder if this is the issue described in http://www.gnu.org/software/autoconf/manual/autoconf-2.57/html_node/autoconf_163.html |
| 21:26.35 | pb_ | if so, it sounds like adding the quotes might actually fix it. |
| 21:26.59 | pb_ | zecke: did you say the other week that you had patched pkg-config to use newer glib bits? |
| 21:27.20 | *** join/#gpe BBrox (n=ulmer@bbrox.org) |
| 21:27.39 | zecke | pb_: yes but this issue persists with glib-1.2.3 |
| 21:27.42 | florian | pb_: okay.. let me try |
| 21:28.04 | zecke | pb_: I might have a pkg-config upgrade in my dir |
| 21:30.06 | zecke | hmm I do not know what I did to make this problem go away |
| 21:30.53 | *** join/#gpe petterhj (n=TESTID@host-81-191-111-34.bluecom.no) |
| 21:35.18 | pb_ | zecke: that is unfortunate |
| 21:35.43 | pb_ | heh, if I try to rebuild the auto* files for pkg-config on my debian box, I get a different error |
| 21:35.54 | pb_ | configure.in:96: AC_CONFIG_AUX_DIR must be called before AM_INIT_AUTOMAKE... |
| 21:35.54 | pb_ | configure.in:4: ... AM_INIT_AUTOMAKE called here |
| 21:36.37 | zecke | pb_: wait where autotools already build when pkg-config is built? |
| 21:36.59 | pH5 | there are patches for blueprobe in openembedded to support h6300 and hx4700. can those be added upstream? |
| 21:37.07 | *** join/#gpe helgoman_ (n=helgoman@dslc-082-082-169-021.pools.arcor-ip.net) |
| 21:38.28 | *** join/#gpe mimecar (n=chatzill@133.Red-83-39-141.dynamicIP.rima-tde.net) |
| 21:38.37 | mimecar | hi |
| 21:39.12 | pb_ | pH5: yeah. don't they depend on some funky patched hciattach, though? |
| 21:39.15 | shiyee | hi mimecar |
| 21:39.41 | pb_ | zecke: I guess so, but that'd be a question for florian |
| 21:40.09 | mimecar | hey shiyee |
| 21:40.54 | pH5 | pb_: I made it optional. If you really don't want any reference to this stuff upstream, I can remove it. |
| 21:41.57 | pb_ | pH5: I don't have a big problem with it, but there doesn't seem much point in putting the support in the upstream version if it isn't going to work with a non-oe hciattach. |
| 21:45.27 | *** join/#gpe bedboi (i=bedboi@217.201.3.5) |
| 21:46.47 | pH5 | pb_: I guess you're right. Can I send you a cleaned up patch? |
| 21:46.54 | pb_ | sure |
| 22:01.47 | florian | pb_: looks like autoupdte doesn't do the trick. |
| 22:02.11 | *** join/#gpe bedboi (i=bedboi@217.201.14.112) |
| 22:03.43 | pb_ | florian: drat |
| 22:04.41 | zecke | pb_: florian : | acglib.m4:13: error: m4_defn: undefined macro: _m4_divert_diversion |
| 22:04.51 | zecke | on a unpatched pkg-config-native 0.20 |
| 22:04.55 | *** join/#gpe reenoo (n=r@p5489F86F.dip.t-dialin.net) |
| 22:05.02 | pb_ | zecke: yeah, that's the same error that florian was seeing |
| 22:05.10 | reenoo | evening |
| 22:05.17 | florian | zecke: looks familiar |
| 22:05.20 | florian | hi reenoo |
| 22:05.22 | pb_ | hi reenoo |
| 22:05.33 | pH5 | hi reenoo |
| 22:05.34 | zecke | florian: it is from around 2000 IIRC. I had that one once already |
| 22:05.58 | reenoo | moin florian |
| 22:06.08 | reenoo | hey pb_, pH5 |
| 22:06.10 | reenoo | hi zecke |
| 22:06.20 | zecke | koen|away: ping ;) |
| 22:08.18 | pb_ | evening dc_ |
| 22:08.35 | dc_ | heeh hey |
| 22:08.40 | dc_ | it was middle name day for a bit there |
| 22:08.52 | pb_ | ah, heh |
| 22:08.56 | pb_ | incognito! |
| 22:09.38 | florian | zecke: any idea how to fix this? |
| 22:11.31 | zecke | florian: do not call autoreconf :} |
| 22:11.49 | zecke | no proper fix atm |
| 22:12.05 | pb_ | won't that break libtool? |
| 22:12.15 | pb_ | mm, I guess not for -native |
| 22:12.22 | florian | zecke: hmm... |
| 22:12.33 | zecke | pb_: that is what I expect (not breaking for native) |
| 22:12.57 | zecke | alternatively use the c++ rewrite of pkg-config :} |
| 22:13.28 | pb_ | heh |
| 22:13.34 | pb_ | all we actually need is pkg.m4 from the new one |
| 22:13.40 | pb_ | maybe we should just patch that into 0.15 and be happy |
| 22:13.52 | zecke | pb_: new one? .20? |
| 22:14.00 | pb_ | yeah |
| 22:14.09 | zecke | pb_: well that one failed for me :} |
| 22:14.17 | pb_ | yeah, it fails for everyone |
| 22:14.37 | florian | ~lart autotools |
| 22:14.41 | law_ | how made the opera-gpe shot? |
| 22:14.43 | pb_ | zecke: what I mean is that you should take the pkg.m4 file from 0.20 (which is just a source file, it doesn't need building) and use it to replace the corresponding file in 0.15 |
| 22:15.00 | law_ | /how/who |
| 22:15.08 | pb_ | zecke: there's nothing actually wrong with pkg-config 0.15, afaik, it's just that its .m4 bits are too old |
| 22:17.43 | pb_ | as yet another option, we could patch libgpewidget to work with 0.15 |
| 22:17.52 | pb_ | it'd be a bit sad to have to do that thouhg |
| 22:17.59 | pb_ | er, though |
| 22:18.10 | florian | hrm |
| 22:27.02 | florian | : package libgpewidget-0.107-r0: task do_compile: started |
| 22:27.50 | florian | NOTE: package libgpewidget-0.107: completed |
| 22:27.54 | florian | here we go... |
| 22:27.58 | pb_ | all hail florian! |
| 22:28.12 | florian | Now i need write permissions... |
| 22:28.16 | florian | koen|away: ping |
| 22:28.29 | pb_ | florian: you should be able to write to the gpe updates directory |
| 22:28.43 | pb_ | oh, right, you mean oe write permissions |
| 22:28.48 | florian | pb_: right |
| 22:30.18 | reenoo | I guess we need a new development model first. testing stuff in .dev first doesn't make much sense with .dev being rather broken |
| 22:30.44 | florian | reenoo: thats why i test it in the stable feed ;-) |
| 22:30.50 | florian | but yes... i understand. |
| 22:30.53 | pb_ | heh |
| 22:30.58 | pb_ | zecke: did you have any luck with svk? |
| 22:31.21 | reenoo | florian: well, yeah. but koen will shoot you if you push to the release branch |
| 22:31.51 | florian | we need some experimental branch... but the problem that moving stuff between branches is a pain with monotone. |
| 22:31.52 | zecke | pb_: the svn convert waits on koen to do a dpkg-reconfigure locales ;) |
| 22:32.03 | pb_ | doh |
| 22:32.14 | reenoo | heh |
| 22:32.36 | florian | reenoo: that might be true... |
| 22:32.39 | zecke | a commit message contains a german 'umlaut'... |
| 22:32.49 | florian | oops |
| 22:32.55 | florian | ~lart German |
| 22:34.06 | *** join/#gpe JiniDog (n=jini@G9381.g.pppool.de) |
| 22:34.20 | pb_ | zecke: oh dear. I wonder why that causes it such a problem. |
| 22:34.22 | florian | pb_: we have libgpewidget in the update feed |
| 22:34.27 | pb_ | florian: rock! |
| 22:34.58 | zecke | pb_: well svn want's to convert it to utf8 or such... but no german locales are on ewi |
| 22:35.43 | pb_ | oh, I see, it needs a legacy iso8859-1 locale? |
| 22:35.45 | pb_ | suck |
| 22:37.18 | florian | okay... gpe-clock 0.23 |
| 22:37.22 | pb_ | florian: ah, you forgot to adjust the packaging to take account of /usr/bin/infoprint |
| 22:37.35 | florian | pb_: oh right... |
| 22:37.45 | pb_ | it needs to go in a separate PACKAGE, otherwise the library renamer won't do its thing with the main libgpewidget |
| 22:42.02 | florian | okay... let me see if i still have the magic in my mind |
| 22:43.17 | reenoo | PACKAGES += libgpewidget-bin; FILES_libgpewidget-bin = ${bindir} |
| 22:43.26 | reenoo | (add some quotes) |
| 22:43.34 | florian | i have :-) |
| 22:43.38 | pb_ | yeah, pretty much. probably need =+, not += |
| 22:44.00 | reenoo | right. good point |
| 22:44.30 | florian | argh! |
| 22:44.35 | florian | whats the difference?! |
| 22:44.44 | reenoo | += appends |
| 22:44.48 | reenoo | =+ prepends |
| 22:44.52 | florian | += looks good |
| 22:45.18 | reenoo | well. files are stored in packages in a first come first server fashion |
| 22:45.28 | reenoo | first serve even |
| 22:45.53 | florian | ah okay... |
| 22:46.02 | florian | in this case it works... |
| 22:50.37 | pb_ | okay, very good |
| 22:51.08 | florian | pb_: just updating libgpewidget packages... |
| 22:51.09 | pb_ | you'll have to rebuild gpe-clock as well, since your 0.23 binary now has a dependency on the wrong libgpewidget |
| 22:51.21 | pb_ | florian: thanks |
| 22:51.45 | florian | oops |
| 22:51.49 | florian | good point |
| 22:51.53 | reenoo | florian: yeah, it will work fine as long as no other entry in PACKAGES has ${bindir} in its FILES_<entry> |
| 22:52.12 | florian | pb_: even worse... i forgot to push PR :-} |
| 22:52.30 | pb_ | florian: don't worry, I deleted the old ones from the feed by hand |
| 22:52.48 | pb_ | they were only there for about ten minutes, so I doubt anybody downloaded them in that time |
| 22:53.38 | florian | reenoo: okay... good to know |
| 22:55.38 | florian | pb_: okay |
| 22:59.08 | florian | okay... lets update gpe-timesheet |
| 23:01.53 | florian | If we manage to fix that tiny yellow gpe-what issue we have 2.7. |
| 23:04.23 | *** join/#gpe petterhj (n=TESTID@host-81-191-111-34.bluecom.no) |
| 23:04.28 | pb_ | very cool |
| 23:04.37 | reenoo | indeed |
| 23:05.32 | florian | huh... Opera in GPE? Remote?! |
| 23:06.40 | florian | What's this: http://handhelds.org/scap/port.13632.png |
| 23:11.15 | law_ | florian: i also dont know :-) |
| 23:11.54 | florian | ah... i should have write access again |
| 23:12.13 | pb_ | excellent |
| 23:12.38 | law_ | n8 all |
| 23:13.20 | *** part/#gpe law_ (n=_law_@213.173.86.202) |
| 23:16.45 | florian | okay, gpe-timesheet is up... |
| 23:16.57 | florian | gpe-mini-browser migth take a while. |
| 23:17.17 | pb_ | great |
| 23:17.19 | florian | GtkWebcore takes ages to compile. |
| 23:17.20 | pb_ | did you redo gpe-clock? |
| 23:17.37 | florian | ah no... wait |
| 23:19.14 | florian | pb_: ok, its up... |
| 23:20.03 | pb_ | florian: rock. thanks. |
| 23:22.30 | *** topic/#gpe by pb_ -> The GPE Palmtop Environment - http://gpe.handhelds.org/ | GPE Wiki: http://handhelds.org/moin/moin.cgi/GPEProject |familiar snapshots: http://familiar.handhelds.org/snapshots/ | Development Manual (in progress): http://www.kernelconcepts.de/~fuchs/gpe/doc/devmanual/ | Happy new year #gpe! | 0.8.3-rc1 updates: http://gpe.handhelds.org/feed/0.8.3-rc1+/ |
| 23:23.20 | florian | goood |
| 23:23.52 | florian | Uh i can see the smoke above the build box at the horizon ;-) |
| 23:26.00 | florian | Scary... it builds gnome-common for gpe-mini-browser |
| 23:26.52 | pb_ | hehe |
| 23:27.11 | pb_ | I think gnome-common is pretty small, luckily. |
| 23:27.52 | florian | ah... libschedule fails in the sdk too. |
| 23:28.57 | florian | compied with at support but no at running seems to cause this. |
| 23:32.20 | pb_ | oh dear |
| 23:33.09 | reenoo | 'night all |
| 23:33.28 | reenoo | fyi, I'll be offline until sunday night it seems |
| 23:33.40 | florian | ah... popen() calling a binary which doesn't exist seems not to return anything. |
| 23:33.46 | pb_ | reenoo: night |
| 23:33.47 | florian | reenoo: good night |
| 23:36.38 | pb_ | florian: hm, unfortunately the gpe-clock and gpe-timesheet that you uploaded still have wrong libgpewidget depends. |
| 23:36.50 | pb_ | I guess your staging shlibs directory must be polluted by some stray files |
| 23:38.06 | florian | ah nasty... |
| 23:38.37 | pb_ | have a poke around in tmp/staging/arm-linux/shlibs and see what libgpewidget related files you have in there. |
| 23:41.12 | florian | pb_: ok - removed all these files and rebuilding libgpewidget now. |
| 23:41.16 | *** join/#gpe csmanx (n=csman@201.230.54.49) |
| 23:42.11 | pb_ | florian: cool |
| 23:45.51 | florian | pb_: did you remove the update feed dir? |
| 23:48.37 | pb_ | sorry, it's back now |
| 23:50.48 | pb_ | florian: those packages are much better, thanks |
| 23:51.20 | florian | pb_: okay... i wonder why cleaning and rebuilding libgpewidget didn't fix staging. |
| 23:51.32 | florian | gpe-mini-browser just joined... |
| 23:51.51 | pb_ | I don't think oe removes files from staging when you clean. |
| 23:51.55 | pb_ | that's probably a bug. |
| 23:52.36 | florian | right.. but rebuilding should overwrite them... or not? |
| 23:52.57 | pb_ | no, they're named for the output package. |
| 23:53.11 | florian | ah... i get the point |
| 23:53.20 | pb_ | so, your broken libgpewidget would have created libgpewidget.shlibs; the working one created libgpewidget1.shlibs. |
| 23:55.16 | florian | yeah |
| 23:59.39 | florian | I hope i can remove what i just canged in gpe-calendar pretty soon :-/ |
| 23:59.53 | pb_ | heh. what did you do? |
