| 00:53.22 | Notify | 03BRL-CAD:starseeker * 67302 (brlcad/trunk/include/bu/mime.h brlcad/trunk/include/bu/path.h and 3 others): Remove the mime/prefix bits from bu_path_component. It's undecided what we'll do about supporting prefixes - we have a potentially ambiguous case on Windows if a user has a g: drive and wants to specify a .g file prefix to a path with g:/path/to/file - did we mean a file on g: or a file on the current drive |
| 00:53.24 | Notify | with the .g type? Whatever we do end up with, it should live separtely from bu_path_component - probably with the mime handling logic. |
| 00:53.26 | Notify | ... |
| 01:14.10 | Notify | 03BRL-CAD:starseeker * 67303 brlcad/trunk/TODO: update todo list |
| 01:29.51 | starseeker | brlcad: what were you expecting interactive mode to do in rt? (-I option) |
| 01:30.36 | starseeker | at least as far back as r22755, it appears to simply be a way to do bu_nice_set for the rt application depending on the size |
| 01:31.05 | starseeker | as near as I can tell, that's still what it's doing... |
| 02:09.28 | *** join/#brlcad boj (~boj@2001:250:3c02:763:8d9d:c208:fd93:9ece) |
| 02:36.40 | *** join/#brlcad boj__ (~boj@2001:250:3c02:763:6894:b32a:63e9:9fd0) |
| 04:02.21 | *** join/#brlcad merzo (~merzo@150-55-201-46.pool.ukrtel.net) |
| 04:43.39 | *** join/#brlcad kkrcodes (~kkrcodes@14.139.160.31) |
| 05:39.08 | *** join/#brlcad kkrcodes (~kkrcodes@14.139.160.31) |
| 05:49.08 | *** join/#brlcad shubham_ (a5e1683c@gateway/web/freenode/ip.165.225.104.60) |
| 05:57.58 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) |
| 06:22.41 | Notify | 03BRL-CAD Wiki:Krishnacodes * 0 /wiki/User:Krishnacodes: |
| 07:03.14 | *** join/#brlcad divamgupta (~divamgupt@103.25.231.102) |
| 07:28.00 | Notify | 03BRL-CAD Wiki:Kutaymacit * 0 /wiki/User:Kutaymaci: |
| 07:35.20 | *** join/#brlcad teepee_ (~teepee@unaffiliated/teepee) |
| 08:05.22 | *** join/#brlcad Stragus (~alexis@modemcable090.29-19-135.mc.videotron.ca) |
| 08:21.05 | *** join/#brlcad 18VAAESG5 (~divamgupt@103.25.231.102) |
| 08:27.04 | *** join/#brlcad gaganjyot (~gaganjyot@122.173.79.215) |
| 08:33.25 | *** join/#brlcad merzo (~merzo@user-94-45-58-141.skif.com.ua) |
| 10:03.25 | *** join/#brlcad davee_ (~davee@71-83-188-23.dhcp.lnbh.ca.charter.com) |
| 10:22.17 | *** join/#brlcad Robert_Dumitru (~robert.du@2a02:2f0b:8020:102a:dd7a:5b9e:318d:fd65) |
| 11:24.04 | Robert_Dumitru | Hello! I am a freshman year student at University of Bucharest, Faculty of Mathematics and Informatics, Computer science section, willing to enter the open source world to gain more coding experience. I am interested in Benchmark Performance Database project. I saw the GSoC 2014 approach and I want to know how I can improve it so that I will be accepted, but I am afraid of doing something too similar to past tries. I |
| 11:24.04 | Robert_Dumitru | want to use Django as the web framework and ,probably ,PostgreSQL for the database, Bootstrap for the front-end part and plotly.js charting library for representing the information acquired from the log files. Is my plan fullfilling the project needs? Do you have any advice for me? Is contribution to Brl-cad mandatory? |
| 11:25.50 | *** join/#brlcad divamgupta (~divamgupt@182.69.89.186) |
| 11:33.45 | shubham_ | Robert_Dumitru: Previous contributions is not mandatory to be a part of GSoC with Brl-cad. |
| 11:33.54 | shubham_ | But you must submit a patch for your project. |
| 11:34.50 | shubham_ | A patch is required for a student to be a part of the GSoC project with brl-cad |
| 11:36.30 | shubham_ | You can start working on a patch for your project now and must submit it with your proposal or before the application submission deadline ends |
| 11:39.54 | shubham_ | For comments regarding your queries related to your project, you can contact the devs and mentors who have worked on it previously, through the mailing list or irc. |
| 11:57.09 | ``Erik | starseeker: rt's interactive mode USED to do some funky iterative sampling where the output was broken up into a large grid and each grid unit was filled with a single ray's color, then it'd iteratively refine until at final resolution :/ |
| 11:57.30 | ``Erik | quadtree style, yo |
| 11:57.41 | starseeker | ``Erik: that must have been a *really* long time ago then? (before the great source code reorg even...) |
| 11:59.40 | ``Erik | I thought it was still working when all the isst tcl stuff was going on *shrug* |
| 11:59.46 | starseeker | hmm |
| 11:59.52 | ``Erik | (I think that was about the last time I looked) |
| 12:00.00 | starseeker | will have to check - maybe it's not the -I option |
| 12:00.51 | ``Erik | hm, I thought it was -i, but it's been years |
| 12:01.26 | ``Erik | woops |
| 12:01.37 | ``Erik | I might be thinking thinking incremental mode |
| 12:01.41 | ``Erik | n/m me :) |
| 12:02.10 | starseeker | that's what I thought it would be (render quickly, refine image) |
| 12:02.52 | starseeker | will check again later - time to pretend I know how to drive... |
| 12:03.18 | ``Erik | there's always code spelunking in the repo (and if svn is too slllooowwww, the git mirror at /usr/www/brlcad.org/brlcad.git is up to date) |
| 12:03.42 | starseeker | heh |
| 12:11.22 | *** join/#brlcad shubham (a5e1683c@gateway/web/freenode/ip.165.225.104.60) |
| 13:01.48 | *** join/#brlcad yorik (~yorik@191.255.88.202) |
| 13:06.07 | *** join/#brlcad kkrcodes (~kkrcodes@14.139.160.31) |
| 13:12.12 | *** join/#brlcad shubham (01163f0f@gateway/web/freenode/ip.1.22.63.15) |
| 13:56.58 | *** join/#brlcad gaganjyot (~gaganjyot@122.173.79.215) |
| 14:12.31 | *** join/#brlcad softcoder32 (~djff@41.202.219.79) |
| 14:45.20 | *** join/#brlcad divamgupta_ (~divamgupt@182.69.89.186) |
| 14:56.54 | *** join/#brlcad kkrcodes (~kkrcodes@14.139.160.31) |
| 14:58.11 | *** join/#brlcad divamgupta (~divamgupt@182.64.61.64) |
| 15:06.45 | *** join/#brlcad merzo (~merzo@92.60.189.225) |
| 15:13.15 | *** join/#brlcad konrado (~konro@41.202.219.67) |
| 15:20.28 | *** join/#brlcad divamgupta (~divamgupt@182.69.89.186) |
| 15:36.04 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 15:36.49 | *** join/#brlcad merzo (~merzo@92.60.189.225) |
| 15:36.58 | *** join/#brlcad davee_ (~davee@71-83-188-23.dhcp.lnbh.ca.charter.com) |
| 15:37.32 | *** join/#brlcad konrado (~konro@41.202.219.70) |
| 16:17.39 | *** join/#brlcad NunoLopesUE (~Nuno@pa4-84-91-138-23.netvisao.pt) |
| 16:17.46 | NunoLopesUE | Hello |
| 16:20.34 | NunoLopesUE | Is anyone there? im kinda new on IRC |
| 16:46.36 | *** join/#brlcad shubham_ (01163f0f@gateway/web/freenode/ip.1.22.63.15) |
| 16:50.17 | *** join/#brlcad divamgupta_ (~divamgupt@182.64.61.64) |
| 17:01.46 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 17:38.29 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 17:50.43 | *** join/#brlcad Lavan (7aa4d8b3@gateway/web/freenode/ip.122.164.216.179) |
| 17:54.36 | *** join/#brlcad jasvir (~jass@75-142-109-136.static.mtpk.ca.charter.com) |
| 17:57.57 | Lavan | To Morrison : The project idea - "Benchmark Performance Database" is listed out http://brlcad.org/wiki/Google_Summer_of_Code/Project_Ideas but it seemed to be already completed under GSoC 2014 itself - http://brlcad.org/wiki/User:Ankeshanand/GSoC14/logs . I'm confused, What exactly do you propose the students to complete for this year GSoC? |
| 18:00.11 | Lavan | ...on the project idea of "Benchmark Performance Database |
| 18:00.20 | Lavan | ...on the project idea of "Benchmark Performance Database" |
| 18:06.44 | *** join/#brlcad gaganjyot (~gaganjyot@122.173.223.242) |
| 18:10.52 | *** join/#brlcad tandoorichick (b64b2de1@gateway/web/freenode/ip.182.75.45.225) |
| 18:16.04 | *** join/#brlcad kanzure (~kanzure@bryan.fairlystable.org) |
| 18:19.27 | *** join/#brlcad softcoder32 (~djff@41.202.219.64) |
| 18:23.54 | *** join/#brlcad jasvir (~jass@75-142-109-136.static.mtpk.ca.charter.com) |
| 18:28.04 | jasvir | starseeker: hi. qged is got compiled and is running but I am facing a problem. Whenever I start qged, the draw area got covered by screenshot of terminal. I am unable to figure out about what problem is. |
| 18:28.17 | jasvir | can you please help me to figure it out |
| 18:29.32 | jasvir | http://screencloud.net/v/ori3 |
| 18:29.42 | Notify | 03BRL-CAD:starseeker * 67304 brlcad/trunk/TODO: Add TODO for rtwizard command line |
| 18:36.20 | *** join/#brlcad penumbra_ (dce39556@gateway/web/freenode/ip.220.227.149.86) |
| 18:46.05 | Notify | 03BRL-CAD:brlcad * 67305 brlcad/trunk/src/brlman/brlman.tcl.in: our style is 4 char indents, not 3; and need to set tcl-indent-level if we're going to treat this as a tcl mode instead of an sh mode file. |
| 18:54.47 | *** join/#brlcad NunoLopesUE (~Nuno@pa4-84-91-138-23.netvisao.pt) |
| 18:57.27 | *** join/#brlcad NunoLopes (~Nuno@pa4-84-91-138-23.netvisao.pt) |
| 19:11.06 | *** join/#brlcad Ch3ck_ (~Ch3ck@154.70.110.46) |
| 19:19.44 | *** join/#brlcad softcoder32 (~djff@41.202.219.68) |
| 19:28.03 | tandoorichick | what is the difference between the bot_specific structure and the rt_bot_internal structures? when do we use the former and when do we use the latter? |
| 19:28.16 | *** join/#brlcad ucanbizon (58e384cb@gateway/web/freenode/ip.88.227.132.203) |
| 19:28.22 | ucanbizon | hello ! |
| 19:30.49 | brlcad | niiice.. new server has SSD drives. time to write 1GB in small block chunks goes from 23sec to 3sec :) |
| 19:30.54 | brlcad | hello ucanbizon |
| 19:31.08 | ucanbizon | how are you :D |
| 19:35.52 | *** join/#brlcad sniok (esde@89.252.29.238) |
| 19:39.18 | *** join/#brlcad softcoder32 (~djff@41.202.219.64) |
| 19:41.16 | brlcad | starseeker: if I'm reading the filesystem hierarchy standard correctly, there are a couple places html files can live |
| 19:43.21 | brlcad | looks like PREFIX/share/doc/brlcad/html or PREFIX/share/brlcad/VERSION/doc/html are kosher, the latter being what we do now |
| 19:43.25 | brlcad | so should be fine |
| 19:44.02 | brlcad | looking at BSD, I'm seeing a similar pattern |
| 19:50.27 | NunoLopes | Hi |
| 19:51.15 | NunoLopes | Im looking for mentor of importer x3d |
| 19:52.11 | brlcad | starseeker: wrote the wrong term -- incremental is what I suspected was broken |
| 19:52.15 | brlcad | -i not -I |
| 19:52.59 | NunoLopes | are you looking for an exporter too? |
| 19:53.02 | *** join/#brlcad shubham_ (01163f0f@gateway/web/freenode/ip.1.22.63.15) |
| 19:53.43 | brlcad | ucanbizon: fine thx |
| 19:54.28 | brlcad | NunoLopes: your question indicates that you've probably not looked at what is in brl-cad currently |
| 19:54.59 | brlcad | I suggest exploring (and actually running) some of the converters |
| 19:57.08 | ucanbizon | I never participated or intended to participate GSoC before |
| 19:57.31 | ucanbizon | I am very in to computational geometry |
| 19:57.44 | ucanbizon | Can I propose an idea |
| 19:58.18 | Notify | 03BRL-CAD:starseeker * 67306 brlcad/trunk/misc/CMake/BRLCAD_Targets.cmake: There's a bug for the Apple isystem flag issue now - add the link to the comment. |
| 20:00.18 | *** join/#brlcad teepee_ (~teepee@unaffiliated/teepee) |
| 20:06.25 | ucanbizon | will quadrilateral mesh generation be useful for brlcad? |
| 20:09.44 | brlcad | ucanbizon: in what context? |
| 20:10.19 | brlcad | quads are obviously useful for a lot of different things, but how specifically they get related to a CAD system, depends |
| 20:13.13 | *** join/#brlcad softcoder32 (~djff@41.202.219.64) |
| 20:18.13 | brlcad | ``Erik: so I don't know if/when/what changed... but I'm rather flabbergasted by the amount of ram being reported |
| 20:18.50 | *** join/#brlcad kanzure (~kanzure@unaffiliated/kanzure) |
| 20:21.14 | ucanbizon | sorry for late answer |
| 20:21.40 | ucanbizon | but to be honest i downloaded the brlcad yesterday |
| 20:22.25 | ucanbizon | but in before when i was parttime working in a company |
| 20:23.26 | ucanbizon | they were saying quadliteral meshes give more precise results |
| 20:23.31 | ucanbizon | in solvers |
| 20:25.25 | brlcad | and avoiding meshes altogether gives even more precise results |
| 20:26.24 | brlcad | what's the point? still need to relate their development to some feature / capability / direction of relevance |
| 20:26.54 | brlcad | brl-cad's n-manifold library technically supports quad meshes (and every other count) |
| 20:27.29 | ucanbizon | oh sorry I didn't know that |
| 20:37.45 | brlcad | no need to be sorry :) |
| 20:37.55 | brlcad | having specialized quad meshes would have some value |
| 20:38.34 | brlcad | but to make a good proposal, you'd have to characterize that value |
| 20:39.43 | ucanbizon | thanks :D |
| 20:46.00 | ucanbizon | I want to make a patch, so i looked at the bug reports. but they are too old. I do not know if those bugs are still exist |
| 20:46.11 | ucanbizon | What should I do |
| 20:48.52 | brlcad | ucanbizon: our BUGS file is essentially a stack, so items near the top are more recently reported |
| 20:49.07 | brlcad | less detail than an sf bug report, but the commit log often has more details |
| 20:49.35 | *** join/#brlcad YANICK_ (~YANICK19@41.202.219.69) |
| 20:49.50 | brlcad | you're also welcome to discuss candidates here, can generally tell you pretty quick what might make a good patch |
| 21:00.29 | *** join/#brlcad softcoder32 (~djff@41.202.219.78) |
| 21:07.13 | *** join/#brlcad shubham___ (71c189a8@gateway/web/freenode/ip.113.193.137.168) |
| 21:07.44 | *** join/#brlcad shubham___ (71c189a8@gateway/web/freenode/ip.113.193.137.168) |
| 21:12.10 | *** join/#brlcad YANICK_ (~YANICK19@41.202.219.68) |
| 21:13.03 | *** join/#brlcad gaganjyot (~gaganjyot@122.173.223.242) |
| 21:46.48 | *** join/#brlcad merzo (~merzo@248-28-132-95.pool.ukrtel.net) |
| 22:19.40 | *** join/#brlcad merzo (~merzo@203-23-133-95.pool.ukrtel.net) |
| 22:24.14 | *** join/#brlcad jasvir (~jass@75-142-109-136.static.mtpk.ca.charter.com) |
| 22:38.03 | Notify | 03BRL-CAD:n_reed * 67307 brlcad/branches/brep-debug/doc/docbook/system/implementation/en/bool_eval_development.xml: add general api warning |
| 22:43.34 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 22:45.22 | Notify | 03BRL-CAD:starseeker * 67308 (brlcad/trunk/src/tclscripts/archer/Archer.tcl brlcad/trunk/src/tclscripts/hv3_man_browser_test.tcl brlcad/trunk/src/tclscripts/man_browser.tcl): Tweaks for archer/mged man page viewers |
| 22:45.55 | Notify | 03BRL-CAD:n_reed * 67309 brlcad/branches/brep-debug/doc/docbook/system/implementation/en/bool_eval_development.xml: edit m_type note |
| 22:47.06 | starseeker | jasvir: did you have a question on qged? |
| 22:47.19 | jasvir | yes |
| 22:47.53 | jasvir | I got a reply on mailing list but yet it's not clear to me |
| 22:48.02 | starseeker | OpenGL is a drawing canvas |
| 22:48.36 | starseeker | nothing is being drawn on it right now, so the most likely answer is that whatever happened to be on that part of the screen is what's staying there |
| 22:48.47 | starseeker | remember, qged has *no* drawing capabilities at the moment |
| 22:48.58 | starseeker | the central widget is just a space filler |
| 22:50.57 | starseeker | brlcad: sweet! (SSD) |
| 22:52.06 | Notify | 03BRL-CAD:starseeker * 67310 brlcad/trunk/TODO: not looking at the -I option... |
| 22:54.32 | *** join/#brlcad teepee_ (~teepee@unaffiliated/teepee) |
| 22:59.27 | *** join/#brlcad shubham (71c189a8@gateway/web/freenode/ip.113.193.137.168) |
| 23:00.58 | *** join/#brlcad Gabriel__ (bc1ba4b6@gateway/web/freenode/ip.188.27.164.182) |
| 23:08.48 | Gabriel__ | Hello, I have made a small patch regarding the search command. Will posting it on sourceforge be enough or is there anything needed to do? |
| 23:11.03 | maths22 | starseeker: I'm really liking that it has 16 GB of ram instead of the 3.5 gb the current server has (or can access) |
| 23:16.33 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 23:31.43 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 23:42.53 | jasvir | starseeker: can you please guide me how should start with it? |
| 23:50.51 | *** join/#brlcad jasvir_ (~androirc@75-142-109-136.static.mtpk.ca.charter.com) |
| 23:52.05 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 23:53.35 | *** join/#brlcad jasvir (~jass@75-142-109-136.static.mtpk.ca.charter.com) |
| 23:54.26 | *** join/#brlcad jasvir_ (~androirc@75-142-109-136.static.mtpk.ca.charter.com) |