| 00:08.51 | Notify | 02GCI:brlcad * 6355628331106304 : Task Closed - Congratulations, this task has been completed successfully. |
| 01:28.03 | *** join/#brlcad taranpreet (~taranpree@106.192.157.41) |
| 01:51.20 | Notify | 02GCI:shivam691999 * 4596409726664704 : Ready for review - The work on this task is ready to be reviewed. |
| 03:18.04 | Notify | 02GCI:brlcad * 4596409726664704 : Task Closed - Congratulations, this task has been completed successfully. |
| 03:18.34 | andromeda-galaxy | brlcad: you here? |
| 03:20.52 | andromeda-galaxy | I've been trying to figure out a reasonable uv mapping for extruded objects, but can't think of anything that seems like it would work particularly well... do you (or anyone else) know of any literature on the subject/other best approaches/have ideas for what would work well? |
| 03:24.35 | *** join/#brlcad YashM (~YashM@117.198.10.46) |
| 04:02.42 | Notify | 02GCI:maitreyav * 4635701832318976 : Ready for review - The work on this task is ready to be reviewed. |
| 04:03.33 | Notify | 02GCI:maitreyav * 4635701832318976 : Changes from the initial version - Hi, There are some complications in responsive design for me when I change the layout of the site. So I polished the webpage... |
| 04:13.20 | Notify | 02GCI:brlcad * 4635701832318976 : Task Closed - Congratulations, this task has been completed successfully. |
| 04:22.46 | Notify | 02GCI:brlcad * 4635701832318976 : clean design - Maitreya, thank you for all your efforts. This looks like a nice clean usable design for browsing all of our landing page candidates. Well done! |
| 04:47.27 | *** join/#brlcad raptor (~raptor@194.28.75.209) |
| 04:51.01 | raptor | Yesterday I made two parallel tasks - animation and icon design. Animation managed to send a design no. Please take a look https://mega.co.nz/#F!nREGlRbA!8hLOicB6aSPJfN5L2EjHWQ |
| 05:07.22 | Notify | 02GCI:singhtaran * 5888591171420160 : None - I have completed the task and my IRC name is taranpreet and i have subscribe for the brld-cad news |
| 05:08.15 | *** join/#brlcad andromedagalaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
| 05:12.33 | Notify | 02GCI:jchh1998 * 5884171381637120 : Ready for review - The work on this task is ready to be reviewed. |
| 05:16.35 | *** join/#brlcad andromeda_galaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
| 05:32.33 | *** join/#brlcad taranpreet (~taranpree@202.164.53.117) |
| 05:33.13 | taranpreet | I have install the brlcad from the .deb file |
| 05:36.35 | taranpreet | but when i run mged and create the create a database it show error of "failed to create database :permission denied" |
| 05:44.19 | *** join/#brlcad YashM_ (~YashM@117.198.20.160) |
| 05:52.27 | *** join/#brlcad MarcTannous (4f733b36@gateway/web/cgi-irc/kiwiirc.com/ip.79.115.59.54) |
| 05:52.35 | MarcTannous | anyone around? |
| 05:52.50 | MarcTannous | I'm having some issues with making tests in rt^3, want to make sure I complete my task before its deadline |
| 05:55.54 | *** join/#brlcad MarcTannous (4f733b36@gateway/web/freenode/ip.79.115.59.54) |
| 06:07.31 | MarcTannous | andromeda-galaxy,ch3ck,brlcad: Any idea why I get "no make rule specified" when trying to "make tester_ci_primitives" or "make test" in rt^3? |
| 06:38.46 | Notify | 02GCI:mini_monstar * 5831970483339264 : Ready for review - The work on this task is ready to be reviewed. |
| 06:39.26 | Notify | 02GCI:mini_monstar * 5831970483339264 : Changed - Hi i have changed it according to your comments. Thanks for your help. |
| 06:57.43 | *** join/#brlcad mmu_man (~revol@vaf26-2-82-244-111-82.fbx.proxad.net) |
| 07:14.42 | *** join/#brlcad atul009 (75df7261@gateway/web/freenode/ip.117.223.114.97) |
| 07:15.47 | *** join/#brlcad andrei_ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) |
| 07:16.37 | atul009 | How can I make CGI gallery facebook covers some cover task are still incomplete |
| 07:16.55 | andrei_ | atul009 : what do you mean by incomplete? |
| 07:17.44 | atul009 | take a look http://www.google-melange.com/gci/task/view/google/gci2014/6394920436760576 |
| 07:17.45 | gcibot | [[ Design a banner for our Facebook page (and/or other social media sites) #19 || BRL-CAD || Reopened || Kesha Shah, Sean ]] |
| 07:18.04 | atul009 | http://www.google-melange.com/gci/task/view/google/gci2014/6425504227786752 |
| 07:18.05 | gcibot | [[ Design a banner for our Facebook page (and/or other social media sites) #15 || BRL-CAD || Open || Harmanpreet, Daniel_R ]] |
| 07:18.11 | atul009 | http://www.google-melange.com/gci/task/view/google/gci2014/6451541124841472 |
| 07:18.11 | gcibot | [[ Design a banner for our Facebook page (and/or other social media sites) #18 || BRL-CAD || Open || Kesha Shah, Daniel_R ]] |
| 07:19.35 | andrei_ | uhm, atul009, you re supposed to make a gallery of the completed ones |
| 07:20.46 | atul009 | But instructions say no matter it's how much compicated but should include all entries |
| 07:25.03 | andrei_ | well it should include all entries |
| 07:25.11 | andrei_ | but the task you showed me has nothing uploaded |
| 07:25.17 | andrei_ | you can't showcase ... nothing |
| 07:25.27 | andrei_ | just do the completed ones and it ll be fine :) |
| 07:25.47 | atul009 | ;) |
| 07:25.51 | atul009 | BYE THAKS |
| 07:34.31 | Notify | 02GCI:rossberg * 5884171381637120 : Task Closed - Congratulations, this task has been completed successfully. |
| 07:39.38 | Notify | 02GCI:rossberg * 5831970483339264 : Task Closed - Congratulations, this task has been completed successfully. |
| 07:45.34 | andrei_ | hm, just 5 tasks left to be completed and 9 hours left |
| 07:47.17 | *** join/#brlcad bugport (~bugport@91.103.85.100) |
| 07:56.22 | Notify | 02GCI:Melange * 4606217016049664 : Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 08:01.36 | *** join/#brlcad andrei_ (c35a6e7d@unaffiliated/andrei/x-7229309) |
| 08:01.36 | *** join/#brlcad andrei_ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) |
| 08:21.29 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) |
| 08:28.28 | *** join/#brlcad merzo (~merzo@178-63-132-95.pool.ukrtel.net) |
| 08:33.12 | *** join/#brlcad MarcTannous (59eef606@gateway/web/cgi-irc/kiwiirc.com/ip.89.238.246.6) |
| 08:38.46 | Notify | 02GCI:tannousmarc * 5787710711136256 : Ready for review - The work on this task is ready to be reviewed. |
| 08:39.49 | Notify | 02GCI:tannousmarc * 5787710711136256 : about www.google.com - had to upload something to mark task completed. Explained Andrei over IRC my situation, patch applies perfectly but there might be an... |
| 08:40.28 | MarcTannous | d_rossberg, http://www.google-melange.com/gci/task/view/google/gci2014/5787710711136256 patch applies perfectly, however there is an issue with "make test". Tried it on a fresh repo (thinking I've done something that ruined my local copy) and it still did not owrk |
| 08:40.29 | gcibot | [[ Run CoreInterface unit test || BRL-CAD || NeedsReview (8 hrs 19 min) || Popescu Andrei, Daniel_R ]] |
| 08:40.43 | MarcTannous | something along the lines of "no make rule specified for ... Stop." |
| 08:40.49 | MarcTannous | can't remember the exact message |
| 08:41.11 | MarcTannous | Hope just the fact that the patch applies is okay as I won't be able to submit anything else due to being in classes from now until the gci finishes |
| 08:41.17 | MarcTannous | have a good day guys, I'm off |
| 09:02.30 | Notify | 02GCI:skyler_007 * 4606217016049664 : has the task been approved. - You did not send me the gci link where the pics are uploaded |
| 09:03.02 | Notify | 02GCI:singhtaran * 5888591171420160 : Ready for review - The work on this task is ready to be reviewed. |
| 09:05.23 | Notify | 02GCI:popescuandrei * 4606217016049664 : None - Hello! First of all, we can't accept the task since it has been reopened, you did not mark it as needing review. Secondly, the links where to be... |
| 09:09.57 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 09:21.29 | Notify | 02GCI:rossberg * 5787710711136256 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 09:21.39 | Notify | 02GCI:rossberg * 5787710711136256 : Deadline extended - The deadline of the task has been extended with 2 days and 0 hours. |
| 09:21.55 | andrei_ | d_rossberg: regarding marc's task, there's no point in extending the deadline |
| 09:22.07 | andrei_ | since the submission deadline is in 8 hours or so :) |
| 09:22.59 | YashM_ | andrei, do you have suggestions for this http://www.google-melange.com/gci/task/view/google/gci2014/5895033286819840 |
| 09:23.00 | gcibot | [[ Design a set of render / cancel render icons #4 || BRL-CAD || NeedsWork || Sean ]] |
| 09:23.50 | andrei_ | hmm |
| 09:24.37 | andrei_ | you could make |
| 09:24.48 | andrei_ | <PROTECTED> |
| 09:24.51 | andrei_ | at first solid |
| 09:24.58 | andrei_ | then larger points |
| 09:25.02 | andrei_ | then gradually smaller points? |
| 09:25.05 | andrei_ | does it make sense? |
| 09:25.51 | YashM_ | you mean pixels? |
| 09:26.25 | Notify | 02GCI:rossberg * 5787710711136256 : ??? - Task wasn't to apply the patch but to run the unit test. You wrote the patch by yourself, so applying it shouldn't be a problem for you. But did you... |
| 09:26.46 | YashM_ | what is "the form" |
| 09:26.52 | andrei_ | I mean |
| 09:26.56 | andrei_ | look at your previous design |
| 09:27.04 | andrei_ | I called that polygon a form |
| 09:27.09 | andrei_ | (what sean said it looks like arb6) |
| 09:27.13 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) |
| 09:30.06 | Notify | 02GCI:tannousmarc * 5787710711136256 : check irc - Pinged you with the issue..got a fresh repo and tried making the tests, but there is an issue. Can you please tell me if it is only on my machine? |
| 09:34.32 | YashM_ | I can't pixelate the surfaces since it's just one color |
| 09:35.01 | YashM_ | i will have to manually do make squares that way which would be difficult to do since its a small space and is 3D |
| 09:35.38 | YashM_ | the wedge icon wouldn't have the dashed lines making a cube, would it? |
| 09:36.11 | andrei_ | hmm, YashM |
| 09:36.13 | andrei_ | let me think a bit |
| 09:36.18 | andrei_ | your task clearly shows enough effort |
| 09:36.25 | andrei_ | but on the other hand |
| 09:36.35 | andrei_ | I don t want to go over brlcad's decision |
| 09:38.03 | andrei_ | the idea is to leave the impression of the image being constructed |
| 09:39.21 | andrei_ | if you can find a rather easy idea on how to do that |
| 09:39.23 | andrei_ | go with it :) |
| 09:40.05 | Notify | 02GCI:rossberg * 5787710711136256 : First you have to compile - First you have to compile brlcad, then the core interface, then the test. What did you compiled until now? BTW, I saw your question... |
| 09:47.34 | Notify | 03BRL-CAD Wiki:Nmz787-brlcad * 0 /wiki/File:Mged_radio_graphic_window.gif: The simple walkie-talkie style radio example as a moving GIF demonstrating panning and moving the view in the Graphics Window of mged. |
| 09:48.39 | Notify | 03BRL-CAD Wiki:Nmz787-brlcad * 7860 /wiki/User:Nmz787-brlcad: I was editing this last night, but then my browser crashed and I lost the preview mediawiki-text :( |
| 09:55.39 | *** join/#brlcad merzo (~merzo@user-94-45-58-141.skif.com.ua) |
| 10:00.00 | nmz787 | brlcad: I tried a few different ways to embed this youtube video into my wiki page, but couldn't figure it out... the animated GIF I embedded is around 0.6MB, and this H264 MP4 video was 1.0MB when I uploaded it to youtube... difference is it is 2x the resolution (and also if I could embed the video, people wouldn't be forced to download the 600kB of animated GIF if they weren't interested) https://www.youtube.com/watch?v=QyrNamrEJGM |
| 10:31.15 | *** join/#brlcad merzo (~merzo@31.221.110.40) |
| 10:48.30 | *** join/#brlcad YashM (~YashM@117.223.12.41) |
| 11:12.49 | *** join/#brlcad raptor_ (~raptor@194.28.75.209) |
| 11:29.42 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 11:42.02 | Notify | 02GCI:rohit_agarwal * 5895422048468992 : Ready for review - The work on this task is ready to be reviewed. |
| 11:42.47 | Notify | 02GCI:Melange * 5002699137351680 : Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 11:44.08 | Notify | 02GCI:rohit_agarwal * 5895422048468992 : None - I uploaded the design. Its a ball being rendered. I also added a shine(which is showing that its being transformed into a original one). |
| 11:53.13 | raptor_ | Yesterday I made two parallel tasks - design icons and animations. 1 of 2 checked did not have time to take. Please could you check out the competition design icons? https://mega.co.nz/#F!nREGlRbA!8hLOicB6aSPJfN5L2EjHWQ |
| 11:57.38 | *** join/#brlcad MarcTannous (4f733b36@gateway/web/cgi-irc/kiwiirc.com/ip.79.115.59.54) |
| 12:12.26 | *** join/#brlcad amisha (~amisha@14.139.122.114) |
| 12:15.22 | MarcTannous | d_rossberg: or any other mentor available, I am having issues with installing rt^3. Trying to cmake its directory, I get "Could not find BRL-CAD root directory - please set BRLCAD_BASE_DIR in CMake |
| 12:15.22 | MarcTannous | Call Stack (most recent call first): |
| 12:15.22 | MarcTannous | <PROTECTED> |
| 12:15.34 | MarcTannous | Checked /usr/, I have brlcad installed |
| 12:15.49 | MarcTannous | Where should I specify its path(/usr/brlcad) so that it works? |
| 12:21.22 | d_rossberg | MarcTannous: wait a minute ... |
| 12:21.52 | *** join/#brlcad merzo (~merzo@92.60.189.225) |
| 12:22.48 | d_rossberg | have you tried the cmake gui? |
| 12:23.33 | MarcTannous | no |
| 12:23.56 | MarcTannous | how should I go about doing it? |
| 12:24.00 | d_rossberg | cmake-gui |
| 12:25.12 | MarcTannous | sec, installnig it |
| 12:26.27 | MarcTannous | configuring done |
| 12:26.28 | d_rossberg | when you have the gui: in "Where to build the binaries:" navigate to your rt^3 build directory |
| 12:26.28 | MarcTannous | generating done |
| 12:26.37 | MarcTannous | yep,did that |
| 12:26.49 | MarcTannous | however the configuration and generation went way too fast |
| 12:26.52 | MarcTannous | no idea why that is |
| 12:26.56 | d_rossberg | then in the build directory: make coreinterface |
| 12:27.25 | d_rossberg | (it is small and thats why fast) |
| 12:27.56 | MarcTannous | no rule to make target 'coreinterface' |
| 12:27.59 | MarcTannous | argh |
| 12:29.04 | d_rossberg | in the cmake-gui after configuring: is the BRLCAD_BIN_DIR set? |
| 12:29.37 | MarcTannous | BRLCAD_BIN_DIR value : BRLCAD_BIN_DIR-NOTFOUND |
| 12:29.43 | MarcTannous | same with configexe and headers dir |
| 12:30.07 | MarcTannous | rt3build is in the same folder as rt^3 and brlcad is in /usr/ |
| 12:30.12 | MarcTannous | any idea why this happens? |
| 12:30.14 | d_rossberg | set it to your brl-cad installation bin directory, then configure again |
| 12:30.25 | MarcTannous | is that /usr/brlcad you are reffering to? |
| 12:30.35 | d_rossberg | /usr/brlcad/bin |
| 12:30.58 | MarcTannous | what about configexe and headers_dir? |
| 12:31.16 | MarcTannous | oh wait, I configured again with that path setup |
| 12:31.18 | d_rossberg | they will automatically be detected |
| 12:31.24 | MarcTannous | and I got about three dozen more errors now |
| 12:31.35 | MarcTannous | pretty much all the libraries |
| 12:31.59 | *** join/#brlcad taranpreet (~taranpree@202.164.53.117) |
| 12:32.30 | d_rossberg | this aren't errors, this are the new values |
| 12:32.49 | d_rossberg | click "configure" again |
| 12:32.53 | MarcTannous | they all have values like "BRLCAD_BN_LIBRARY-NOTFOUND" |
| 12:33.08 | MarcTannous | "error in configuration process, project files may be invalid" |
| 12:33.59 | MarcTannous | should I try installing brlcad again? |
| 12:33.59 | d_rossberg | do you have /usr/brlcad/bin/brlcad-config? |
| 12:34.36 | MarcTannous | ow |
| 12:34.39 | MarcTannous | I think I found the issue |
| 12:34.49 | MarcTannous | it's actually /brlcad/dev-7.25.0 |
| 12:34.52 | MarcTannous | let me just see if this works |
| 12:35.15 | MarcTannous | ow |
| 12:35.17 | MarcTannous | it worked |
| 12:35.28 | MarcTannous | fingers crossed that make coreinterface works now |
| 12:35.35 | andrei_ | O_o |
| 12:35.44 | d_rossberg | some targets may not be found, but this isn't a problem |
| 12:36.03 | MarcTannous | make: *** No rule to make target `coreinterface'. Stop. |
| 12:36.18 | MarcTannous | :( |
| 12:36.40 | d_rossberg | did you "generated" the make files again? |
| 12:37.06 | MarcTannous | yes |
| 12:37.14 | MarcTannous | and cmake-gui returned no errors on that |
| 12:37.15 | andromeda-galaxy | d_rossberg, andrei_: do either of you have any ideas about my question about extruded-sketch uv mapping) |
| 12:38.40 | MarcTannous | the files all seem to be in place too |
| 12:39.08 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) |
| 12:39.16 | MarcTannous | I have 4 directories, src,tests,tests-bin,cmakefiles and 4 files outsideo f them cmakecache, cmake_install, ctesttestfile and makefile |
| 12:40.53 | d_rossberg | hmm, i'll try from scratch ... |
| 12:41.46 | andromeda-galaxy | (sorry to interrupt, but I've been wondering for a while, so I wanted to ask before you left) |
| 12:42.46 | MarcTannous | no problem..I am just feeling really stupid and think that there's something easy I missed somewhere |
| 12:43.06 | MarcTannous | and wanted to see if the issue only happens on my machine |
| 12:44.03 | d_rossberg | MarcTannous: is /brlcad/dev-7.25.0/bin in your path? |
| 12:44.31 | d_rossberg | on my machine it finds everything automaticaly |
| 12:44.39 | andrei_ | aah, that's it |
| 12:44.40 | andrei_ | Marc: |
| 12:44.41 | MarcTannous | no it is not |
| 12:45.09 | andrei_ | echo PATH=$PATH:/usr/dev-7.25.0/brlcad/bin should do it |
| 12:45.11 | andrei_ | or even |
| 12:45.14 | andrei_ | echo PATH=$PATH:/usr/dev-7.25.0/brlcad |
| 12:46.33 | MarcTannous | Found BRL-CAD at /usr/brlcad/dev-7.25.0 |
| 12:46.33 | MarcTannous | <PROTECTED> |
| 12:46.33 | MarcTannous | <PROTECTED> |
| 12:46.37 | MarcTannous | from cmake-interface |
| 12:46.40 | MarcTannous | cmake-gui* |
| 12:46.50 | MarcTannous | Could not locate 'brlcad-config' - no BRL-CAD version available |
| 12:46.57 | MarcTannous | should I just try re-installing brlcad? |
| 12:48.34 | andrei_ | try it with /bin as well |
| 12:48.41 | andrei_ | PATH=$PATH:/usr/dev-7.25.0/brlcad/bin |
| 12:48.44 | Notify | 02GCI:retardvoldy * 5511140318642176 : Ready for review - The work on this task is ready to be reviewed. |
| 12:48.45 | andrei_ | echo PATH=$PATH:/usr/dev-7.25.0/brlcad/bin |
| 12:48.46 | MarcTannous | that's what I tried |
| 12:48.54 | andrei_ | that's really weird |
| 12:50.01 | d_rossberg | MarcTannous: maybe you should make a clean install first, the brlcad-config script is needed there |
| 12:50.22 | MarcTannous | clean install = delete rt^3, delete brlcad and install everything all over again? |
| 12:50.24 | *** join/#brlcad andromeda_galaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
| 12:50.42 | d_rossberg | andromeda_galaxy: whar was your question? |
| 12:51.07 | andromeda-galaxy | I've been trying to figure out a reasonable uv mapping for extruded objects, but can't think of anything that seems like it would work particularly well... do you (or anyone else) know of any literature on the subject/other best approaches/have ideas for what would work well? |
| 12:51.56 | d_rossberg | you should first test the patch from the referenced task, does it work? |
| 12:52.01 | andromeda-galaxy | no |
| 12:52.18 | andromeda-galaxy | when raytracing, rt spits out a ton of errors about invalid uv coordinates |
| 12:54.24 | andromeda-galaxy | "shade_inputs: bad u, v=0.000000e+00, -1.000000e+00 du, dv=0, 0 seg=extrude_example ID_EXTRUDE surf=1. xy=239, 443 Making green." |
| 12:55.06 | andromeda-galaxy | also, I can't find any documentation on the purpose of du and dv, what are they're values supposed to mean? |
| 12:55.23 | d_rossberg | is there an obvious reason why the code doesn't work? |
| 12:55.41 | andromeda-galaxy | well, it just sets u and v to vpriv[X] and vpriv[Y] |
| 12:55.52 | d_rossberg | saying "the patch is bad" would be a valid result too |
| 12:56.01 | andromeda-galaxy | I can't find comment explaining exactly what vpriv does, but that doesn't seem right... |
| 12:59.15 | andromeda-galaxy | (it looks to me like rt_extrude_shot &c are setting vpriv to various different values depending on the type of segment hit, the fact that every other usage of vpriv checks which kind of segment and this doesn't seems wrong to me) |
| 13:03.14 | d_rossberg | vpriv is a "private vector", whatever this means |
| 13:04.10 | andromeda-galaxy | I saw that, I wasn't originally sure what it means |
| 13:04.21 | andromeda-galaxy | I've been looking at the _shot code some more now, however, |
| 13:04.26 | d_rossberg | there is a RT_HIT_UVCOORD macro which could be eventually useful |
| 13:04.35 | MarcTannous | d_rossberg: something weird is going on |
| 13:04.46 | MarcTannous | you extended my deadline on http://www.google-melange.com/gci/task/view/google/gci2014/5787710711136256 by 2 days, but it says I have 4 more hours to complete it |
| 13:04.47 | gcibot | [[ Run CoreInterface unit test || BRL-CAD || NeedsWork || Popescu Andrei, Daniel_R ]] |
| 13:05.14 | MarcTannous | what happens if the task does not get closed in the next 4 hours? |
| 13:05.15 | d_rossberg | yes, GCi ends in 4h |
| 13:05.16 | andromeda-galaxy | d_rossberg: isn't that macro for potential callers? |
| 13:05.25 | andromeda-galaxy | d_rossberg: I've been looking more at vpriv |
| 13:05.41 | andromeda-galaxy | and it sets it to (kind of odd) different values for each type of segment/surface |
| 13:05.43 | andromeda-galaxy | : |
| 13:05.52 | andromeda-galaxy | for example, for an lseg, it sets vpriv t |
| 13:05.54 | andromeda-galaxy | *to |
| 13:06.10 | andromeda-galaxy | <PROTECTED> |
| 13:06.18 | MarcTannous | oh god |
| 13:06.31 | andromeda-galaxy | <PROTECTED> |
| 13:06.38 | MarcTannous | well time to close any app running in the background and hope I can get a clean build and my patch working before that |
| 13:07.17 | d_rossberg | andromeda-galaxy: as i've said, explaining why the patch doesn't work at all can be a result of your task too |
| 13:08.15 | andromeda-galaxy | d_rossberg: well, I was hoping to get it working correctly (since that's what the task description originally says)... do you have any ideas what a correct uv mapping function would look like? |
| 13:08.30 | starseeker | depending on the shell, you may need to set your path with export not echo |
| 13:08.48 | starseeker | e.g. export PATH=$PATH:/usr/dev-7.25.0/brlcad/bin |
| 13:10.11 | starseeker | MarcTannous: what shell do you use? |
| 13:11.12 | MarcTannous | bash |
| 13:11.22 | starseeker | yeah, try export instead of echo |
| 13:15.02 | andromeda-galaxy | starseeker: any ideas about uv mapping functions? I would like to get a new one implemented before submitting the task, but can't find/think of anything that seems like it would work well (smooth, continuous, one image over all the faces...) mostly because there can be holes inside the object... |
| 13:15.07 | MarcTannous | okay so I just got a clean install |
| 13:15.10 | MarcTannous | on brlcad |
| 13:15.22 | MarcTannous | tried making, still not finding brlcadbin_dir |
| 13:15.27 | MarcTannous | let me try to export what starseeker said |
| 13:16.26 | MarcTannous | still not working |
| 13:16.43 | MarcTannous | BRLCAD_BIN_DIR-NOTFOUNd |
| 13:16.58 | starseeker | andromeda-galaxy: sorry, not offhand - i've wanted to look into this for uv mappings: http://www.cs.columbia.edu/~keenan/Projects/SpinTransformations/ |
| 13:17.21 | starseeker | andromeda-galaxy: but I don't know for sure if it's of any help or not, and probably doesn't address holes |
| 13:17.34 | starseeker | MarcTannous: what does "which mged" report? |
| 13:17.55 | MarcTannous | where should I see it? |
| 13:18.18 | starseeker | /usr/dev-7.25.0/brlcad/bin/mged if that's where you've installed brlcad |
| 13:18.31 | MarcTannous | let me see |
| 13:18.49 | MarcTannous | no mged directory in bin |
| 13:18.58 | starseeker | where is brlcad installed? |
| 13:19.28 | starseeker | is it /usr/brlcad/dev-7.25.0 or somewhere else? |
| 13:19.33 | MarcTannous | yes |
| 13:19.39 | MarcTannous | that is it |
| 13:20.06 | starseeker | then tha'ts the path you want to use: export PATH=$PATH:/usr/brlcad/dev-7.25.0/bin |
| 13:20.15 | MarcTannous | that's what I usedc |
| 13:20.41 | starseeker | earlier it was usr/dev-7.25.0/brlcad |
| 13:20.56 | MarcTannous | you typed that, but I corrected it when inputting in bash |
| 13:21.19 | starseeker | is there an mged binary at /usr/brlcad/dev-7.25.0/bin/mged ? |
| 13:22.00 | MarcTannous | well I must have typed dev-7.24.0 |
| 13:22.11 | MarcTannous | because I tried it again, no errors and now tried making coreitnerface and it worked |
| 13:22.14 | MarcTannous | thanks |
| 13:22.18 | starseeker | nods |
| 13:22.32 | starseeker | no problem |
| 13:23.24 | andromeda-galaxy | starseeker: oh well... d_rossberg: any other ideas? |
| 13:25.24 | Notify | 02GCI:brlcad * 5888591171420160 : Task Closed - Congratulations, this task has been completed successfully. |
| 13:25.47 | d_rossberg | andromeda-galaxy: no idea, i have never had a look at uv mapping :( |
| 13:26.24 | andromeda-galaxy | d_rossberg: oh well... |
| 13:26.27 | andromeda-galaxy | brlcad: are you around? |
| 13:26.46 | andromeda-galaxy | d_rossberg, starseeker: well, thanks for discussing it with me anyway |
| 13:30.21 | MarcTannous | oh so many errors to fix |
| 13:30.22 | MarcTannous | damn |
| 13:30.40 | MarcTannous | good thing it's only some constructors not being capitalized |
| 13:32.23 | Notify | 02GCI:brlcad * 5895422048468992 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 13:32.59 | Notify | 02GCI:Melange * 5859130111688704 : Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 13:33.56 | *** join/#brlcad amisha_ (~amisha@14.139.122.114) |
| 13:34.25 | *** join/#brlcad merzo (~merzo@31.221.110.40) |
| 13:34.27 | MarcTannous | d_rossberg, andrei_: a strange issue with the Sphere object |
| 13:34.40 | andrei_ | what issue? |
| 13:34.58 | MarcTannous | testing the Clone() function, I created two spheres, sph and sph2 |
| 13:35.32 | MarcTannous | one of them was being parsed as a parameter to the test "static int test(BRLCAD::Sphere sph)" while the other was being initialized as BRLCAD::Sphere sph2 |
| 13:35.48 | MarcTannous | to clone sph into sph2, the correct syntax is sph2=sph.Clone(); ? |
| 13:36.02 | andrei_ | I believe it's |
| 13:36.11 | andrei_ | Spehere *sph2 = sph.Clone(); |
| 13:36.13 | andrei_ | yes |
| 13:36.16 | andrei_ | Sphere* |
| 13:36.24 | MarcTannous | <PROTECTED> |
| 13:36.28 | MarcTannous | wait |
| 13:36.32 | MarcTannous | <PROTECTED> |
| 13:36.44 | MarcTannous | damn copy paste is not working properly over irc |
| 13:37.05 | MarcTannous | I am getting an eror when compiling it, "no match for operator= operand types are BRLCAD::Sphere and BRLCAD::Object* |
| 13:37.10 | MarcTannous | in sph2=sph.Clone(); |
| 13:37.18 | MarcTannous | they are both initialized as BRLCAD::Sphere s |
| 13:37.19 | d_rossberg | Clone() returns a pointer |
| 13:37.20 | andrei_ | ah |
| 13:37.22 | MarcTannous | I just double checked |
| 13:37.27 | andrei_ | the error tells you |
| 13:37.44 | d_rossberg | BRLCAD::Sphere* sph2 |
| 13:37.44 | andrei_ | what d_rossberg mentioned |
| 13:37.53 | Notify | 02GCI:brlcad * 5895422048468992 : general idea is good - Rohit, the general idea you have is good. However, the rendering isn't emphasized enough. For example, the "pixels" you have a barely... |
| 13:38.17 | d_rossberg | and don't forget to delete sph2 after you don't need it any more |
| 13:38.34 | MarcTannous | hmm |
| 13:38.41 | MarcTannous | tried what you said and now I get |
| 13:38.53 | MarcTannous | error: invalid conversion from 'BRLCAD::Object*' to 'BRLCAD::Sphere*' |
| 13:39.41 | d_rossberg | that's right, Clone() is an Object method |
| 13:39.43 | andrei_ | hm |
| 13:39.54 | andrei_ | reinterpret_cast<BRLCAD::Sphere*> |
| 13:40.04 | d_rossberg | cast it (static_cast or dynamic_cast) |
| 13:40.15 | MarcTannous | wait what |
| 13:40.18 | andrei_ | you need to do |
| 13:40.44 | andrei_ | BRLCAD::Sphere* sph2 = static_cast<BRLCAD::Sphere*> sph.Clone(); |
| 13:40.58 | d_rossberg | or: BRLCAD::Sphere sph2; sph2 = sph; |
| 13:41.19 | MarcTannous | what does static_cast do? |
| 13:41.25 | MarcTannous | asking just so that I understand what I'm doing |
| 13:41.29 | andrei_ | it changes the object's type |
| 13:41.40 | d_rossberg | this is the usual c-style cast |
| 13:41.42 | MarcTannous | oh |
| 13:41.53 | andrei_ | sphere extends object |
| 13:41.54 | MarcTannous | what you would do in c++ with (char*) for example? |
| 13:42.02 | d_rossberg | (together with reinterpret_cast) |
| 13:42.07 | andrei_ | you would use string :) |
| 13:42.18 | MarcTannous | yeah, but you got my point |
| 13:42.41 | andrei_ | I did, but I m not sure what you re asking |
| 13:42.43 | andrei_ | regarding char* |
| 13:42.50 | MarcTannous | char* was just an example |
| 13:43.05 | MarcTannous | the static_cast changes an object's type to whatever you want it to, right? |
| 13:43.06 | andrei_ | you could do char* something = static_cast<char*> initially_voidstar_pointer too |
| 13:43.16 | andrei_ | yeah |
| 13:43.16 | MarcTannous | okay |
| 13:43.18 | MarcTannous | now I got it |
| 13:43.18 | MarcTannous | ty |
| 13:43.22 | andrei_ | just like how you do in C with (type) |
| 13:43.29 | MarcTannous | yeah |
| 13:44.04 | andrei_ | if the roles were switching |
| 13:44.09 | andrei_ | you d get no compiler warning |
| 13:44.16 | andrei_ | or you shouldn't, at least |
| 13:44.45 | andrei_ | in any case, nevermind, it's not related to your issue |
| 13:45.14 | MarcTannous | okay so I fixed pretty much everything that was related to my test |
| 13:45.29 | andrei_ | does it build ? |
| 13:45.35 | MarcTannous | except for a thing that I got from the other tests and discussed a few weeks ago here on IRC that this is how I should approach it |
| 13:45.54 | MarcTannous | let me copy it into a pastebin as copy paste is not owrking properly for me over irc |
| 13:47.04 | MarcTannous | http://pastebin.com/E62za79T |
| 13:47.04 | MarcTannous | this |
| 13:47.28 | MarcTannous | my "main" is a void because if the test is a succes the object gets added to the database, and takes the database as a parameter |
| 13:47.34 | MarcTannous | just like the other tests (halfspace, for example) |
| 13:48.02 | *** join/#brlcad mmu_man (~revol@vaf26-2-82-244-111-82.fbx.proxad.net) |
| 13:48.08 | andrei_ | âDatabaseâ is not a member of âBRLCADâ |
| 13:48.10 | andrei_ | this is weird |
| 13:48.21 | andrei_ | have you included it? |
| 13:48.56 | MarcTannous | oh wait |
| 13:49.03 | MarcTannous | I had to include "primitives.h" |
| 13:49.04 | MarcTannous | my bad |
| 13:49.06 | MarcTannous | works now |
| 13:49.21 | andrei_ | awesome ! :) |
| 13:49.36 | MarcTannous | wow |
| 13:49.37 | MarcTannous | this feels good |
| 13:49.47 | MarcTannous | just got rid of dozens of errors |
| 13:50.33 | andrei_ | haha, you ll get to do that for pretty much the most part of your proffesional life, don't worry :) |
| 13:50.54 | andrei_ | also, in C++, there's no shortage of errors |
| 13:51.35 | MarcTannous | I'm happy that I got to finish my task in due time |
| 13:52.14 | Notify | 02GCI:brlcad * 5511140318642176 : oops - Retardvoldy, Daniel is quite right. I was initially impressed that you covered all of the 3d modeling designs and didn't notice that this is a sticker... |
| 13:52.25 | Notify | 02GCI:tannousmarc * 5787710711136256 : Test worked, after some modifications - marc@marc-To-be-filled-by-OEM:~/clean/rt3build$ make tester_ci_primitives [ 88%] Built target coreinterface Scanning... |
| 13:52.30 | Notify | 02GCI:brlcad * 5511140318642176 : Task Reopened - This task has been Reopened. |
| 13:52.45 | unicodesnowman | wow |
| 13:52.50 | Notify | 02GCI:tannousmarc * 5787710711136256 : Ready for review - The work on this task is ready to be reviewed. |
| 13:52.52 | unicodesnowman | what is with so many people wanting to cheat in brlcad? |
| 13:53.14 | andrei_ | what do you mean? |
| 13:53.33 | MarcTannous | probably talking about the forges |
| 13:53.45 | andrei_ | ah, I didn't notice brlcad's full reply |
| 13:54.28 | MarcTannous | does my task also have to be evaluted before gci ends? or is there some extra time for that? |
| 13:54.45 | unicodesnowman | extra time |
| 13:55.03 | MarcTannous | phew |
| 13:55.17 | ``Erik | I'd be surprised if BRL-CAD has a much higher plagiarism rate than other projects :/ some people have no ethics and think that "lie cheat and steal" is ok |
| 13:55.34 | d_rossberg | MarcTannous: did you run "make test" ? |
| 13:55.36 | andrei_ | ``Erik, I think unicodesnowman might have a point |
| 13:55.46 | andrei_ | we had plenty design/gallery tasks |
| 13:55.55 | MarcTannous | d_rossberg, yeah |
| 13:55.58 | andrei_ | which are easy to copy |
| 13:55.58 | MarcTannous | let me just copy paste the results |
| 13:56.05 | d_rossberg | :) |
| 13:56.18 | MarcTannous | http://pastebin.com/qF4qHdsZ |
| 13:56.38 | MarcTannous | oops wrong copy pate |
| 13:56.55 | MarcTannous | http://pastebin.com/jsA4CkCq there we go |
| 13:57.09 | Notify | 02GCI:brlcad * 5820470842621952 : 3 hours - Just three hours remaining to work on GCI tasks! Please upload your best and final work by then. |
| 13:57.29 | Notify | 02GCI:brlcad * 5264182400253952 : 3 hours - Just three hours remaining to work on GCI tasks! Please upload your best and final work by then. |
| 13:57.49 | Notify | 02GCI:brlcad * 6360824117460992 : 3 hours - Just three hours remaining to work on GCI tasks! Please upload your best and final work by then. |
| 13:57.54 | Notify | 02GCI:brlcad * 5688858951811072 : 3 hours - Just three hours remaining to work on GCI tasks! Please upload your best and final work by then. |
| 13:58.09 | Notify | 02GCI:brlcad * 6087649752252416 : 3 hours - Just three hours remaining to work on GCI tasks! Please upload your best and final work by then. |
| 13:58.24 | Notify | 02GCI:brlcad * 4625664627965952 : 3 hours - Just three hours remaining to work on GCI tasks! Please upload your final work by then. |
| 13:58.34 | Notify | 02GCI:rossberg * 5787710711136256 : Task Closed - Congratulations, this task has been completed successfully. |
| 13:58.51 | MarcTannous | thank you d_rossberg and andrei_ for your help today |
| 13:58.54 | Notify | 02GCI:brlcad * 5511203400974336 : 3 hours - Hi Aditya! Just three hours remaining to work on GCI tasks! Please upload your final work by then. |
| 13:58.56 | MarcTannous | felt great to get it working |
| 13:59.04 | Notify | 02GCI:brlcad * 4956557716488192 : 3 hours - Just three hours remaining to work on GCI tasks! Please upload your final work by then. |
| 13:59.14 | Notify | 02GCI:brlcad * 5571450517848064 : 3 hours - Just three hours remaining to work on GCI tasks! Please upload your final work by then. |
| 13:59.19 | Notify | 02GCI:brlcad * 6415875447980032 : 3 hours - Just three hours remaining to work on GCI tasks! Please upload your final work by then. |
| 13:59.50 | Notify | 02GCI:brlcad * 5604954702086144 : 3 hours - Just three hours remaining to work on GCI tasks! Please upload your final work by then. The deadline is firm and no submissions will be allowed... |
| 14:00.39 | Notify | 02GCI:brlcad * 4547822640693248 : 3 hours - Just three hours remaining ... Looks like you're were just a hair shy of outpacing Ignacio. :) |
| 14:01.18 | MarcTannous | wow |
| 14:01.24 | MarcTannous | ignacio has 84 tasks completed |
| 14:01.34 | Notify | 02GCI:o7p9bxbnyj * 4547822640693248 : Ready for review - The work on this task is ready to be reviewed. |
| 14:01.40 | andrei_ | and you? |
| 14:01.50 | andrei_ | (can't access the website from work) |
| 14:01.52 | MarcTannous | 48 |
| 14:01.57 | MarcTannous | ignacio is at another org tho |
| 14:02.01 | unicodesnowman | in wikimedia, someone wanted 3 tasks completed |
| 14:02.04 | MarcTannous | but damn this guy |
| 14:02.06 | unicodesnowman | yesterday, they unclaimed one task |
| 14:02.17 | unicodesnowman | 1 minute before the deadline for claiming |
| 14:02.22 | unicodesnowman | and didn't have time to claim another.. |
| 14:02.32 | MarcTannous | wow |
| 14:02.42 | unicodesnowman | what's curious is if they kept their original task.. they'd have 3 done and a tshirt. |
| 14:03.11 | andromeda-galaxy | MarcTannous: if you keep wanting to work on rt^3, something to consider would be reworking the test harness, as it is, "make test" is going to pass whether or not the tests are failing... |
| 14:03.29 | MarcTannous | yeah, you mentioned that a few weeks ago |
| 14:03.38 | MarcTannous | about making the tests simialr to the ones over on brlcad, right? |
| 14:08.50 | andromeda-galaxy | yeah, basically |
| 14:09.04 | andromeda-galaxy | all the primitive tests are lumped together into one test |
| 14:09.10 | andromeda-galaxy | and that test runner doesn't check the result of the sub-tests |
| 14:09.29 | MarcTannous | you should really get this to d_rossberg or brlcad's attention |
| 14:09.39 | MarcTannous | there are few tests now and it could easily be changed I think |
| 14:09.58 | MarcTannous | but if it gets to dozens of tests running like that, it would be harder to change at once |
| 14:11.09 | Notify | 02GCI:rohit_agarwal * 5895422048468992 : Ready for review - The work on this task is ready to be reviewed. |
| 14:14.53 | andromeda-galaxy | d_rossberg: I decided to do what you said and just submit it with an explanation of why the old code didn't work, since no-one could figure out a new algorithm... |
| 14:16.40 | raptor_ | Yesterday I made two parallel tasks - design icons and animations. 1 of 2 checked did not have time to take. Please could you check out the competition design icons? https://mega.co.nz/#F!nREGlRbA!8hLOicB6aSPJfN5L2EjHWQ |
| 14:17.16 | raptor_ | I do not pretend to that |
| 14:17.19 | Notify | 02GCI:o7p9bxbnyj * 4547822640693248 : None - After asking on IRC and waiting for some time, I decided that I couldn't come up with a new algorithm that worked, and so decided to submit my analysis... |
| 14:18.23 | *** join/#brlcad andromeda_galaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
| 14:19.04 | Notify | 02GCI:brlcad * 4547822640693248 : Task Closed - Congratulations, this task has been completed successfully. |
| 14:20.30 | *** join/#brlcad amisha_ (~amisha@14.139.122.114) |
| 14:21.15 | Notify | 02GCI:brlcad * 5895422048468992 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 14:21.35 | gcibot | Do you want to share your guesses about winners? Write them here: https://docs.google.com/spreadsheets/d/1HLYgPnyuXEcWOOQmzE3IMJKuPtFgXdJM7BnErzqbvZY/edit#gid=0 |
| 14:22.55 | andrei_ | https://docs.google.com/spreadsheets/d/1HLYgPnyuXEcWOOQmzE3IMJKuPtFgXdJM7BnErzqbvZY/edit#gid=0 brlcad doesn't even exist :( |
| 14:23.01 | andrei_ | BRL-CAD* |
| 14:23.28 | andromeda-galaxy | only 6/12 orgs... |
| 14:23.31 | ty221 | Create it |
| 14:23.42 | ty221 | There shouldnt be any trouble |
| 14:23.45 | unicodesnowman | added |
| 14:24.30 | unicodesnowman | sorry, didn't expect gcibot to post it in all channels |
| 14:25.03 | ty221 | unicodesnowman: he is watching us |
| 14:25.21 | andrei_ | ty221: who's watching you? |
| 14:26.03 | ty221 | andrei_: mentors |
| 14:26.31 | andrei_ | ty221: there are no mentors around right now, they're busy, but why would they watch you :) |
| 14:27.29 | Notify | 02GCI:brlcad * 5895422048468992 Design a set of render / cancel render icons #2 https://www.google-melange.com/gci/task/view/google/gci2014/5895422048468992: just flipped? Just flipping the... |
| 14:27.30 | gcibot | [[ Design a set of render / cancel render icons #2 || BRL-CAD || NeedsWork || Sean ]] |
| 14:27.30 | Notify | 02GCI:helix * 5895033286819840 : None - If it had to be a wedge, there wouldn't be any dashed lines that make a cube, isn't it? The thing is, I can't pixelate this as the surfaces are one plain... |
| 14:27.47 | ty221 | andrei_: To check my task progess :p |
| 14:27.57 | *** join/#brlcad amisha_ (~amisha@14.139.122.114) |
| 14:30.43 | YashM | GCI was fun, thanks everyone |
| 14:32.56 | MarcTannous | well someone is ruining the guesses table |
| 14:35.03 | ignacio | MarcTannous, is that me? |
| 14:35.05 | ignacio | "<Notify> 09:00:39> GCI:brlcad * 4547822640693248 : 3 hours - Just three hours remaining ... Looks like you're were just a hair shy of outpacing Ignacio. :)" |
| 14:35.21 | MarcTannous | there is someone typing Charlie Hebdo into all the fields |
| 14:35.30 | MarcTannous | not sure who it is |
| 14:35.46 | ignacio | lol, but Ignacio = me? |
| 14:35.49 | andromeda-galaxy | ignacio: are you the ignacio from sugar labs? |
| 14:36.01 | unicodesnowman | MarcTannous, someone is very immature. |
| 14:36.20 | MarcTannous | unicodesnowman, is there any way to prevent it frm happening?\ |
| 14:36.33 | unicodesnowman | can't do that and keep it open for editing, but there is the revision history tool |
| 14:36.35 | unicodesnowman | it's very easy to revert |
| 14:37.09 | MarcTannous | oh |
| 14:37.16 | MarcTannous | that's great |
| 14:38.18 | andrei_ | I wonder how many simultaneous users |
| 14:38.23 | andrei_ | can gdocs support |
| 14:38.38 | MarcTannous | there's 50 atm on that doc |
| 14:38.55 | ignacio | andromeda-galaxy, yes :P |
| 14:39.07 | andromeda-galaxy | then it's probably you |
| 14:39.54 | ignacio | well, I dont understand the comment. |
| 14:40.07 | MarcTannous | which comment? |
| 14:41.01 | ignacio | " Looks like you're were just a hair shy of outpacing Ignacio" |
| 14:41.11 | YashM | lol someone wrote Raptor all over BRL-CAD |
| 14:41.19 | MarcTannous | probably regarding the fact that you have like 85 tasks |
| 14:41.53 | YashM | Damn why can't people behave |
| 14:42.16 | MarcTannous | anonimity does wonders to people's personalities |
| 14:42.59 | unicodesnowman | reverted.. sigh |
| 14:43.01 | raptor_ | YashM: Hmm who wrote it |
| 14:43.24 | YashM | raptor, someone's obsessed with you ;) |
| 14:43.54 | YashM | andromeda-galaxy, Marctannous, you guys coming back next year? |
| 14:44.00 | MarcTannous | yep |
| 14:44.01 | raptor_ | probably yes |
| 14:44.12 | andromeda-galaxy | YashM: not sure yet |
| 14:44.19 | MarcTannous | not sure if I have the age to do so though |
| 14:44.21 | YashM | This was my first and last time :( |
| 14:44.37 | raptor_ | do not come back) |
| 14:45.16 | raptor_ | I was joking) |
| 14:46.41 | Notify | 02GCI:rohit_agarwal * 5895422048468992 : Ready for review - The work on this task is ready to be reviewed. |
| 14:50.13 | MarcTannous | yeah, that prediction stuff ain't gonna work |
| 14:50.18 | MarcTannous | people changing everything around |
| 14:52.19 | ignacio | wth is wrting 'raptor' in brlcad!? |
| 14:52.24 | MarcTannous | erm |
| 14:52.31 | MarcTannous | I just got access denied from that document |
| 14:52.37 | MarcTannous | for changing my predictions back to what they initially were |
| 14:52.38 | MarcTannous | ... |
| 14:52.39 | unicodesnowman | I reset the link. |
| 14:52.47 | unicodesnowman | MarcTannous, I blocked everyone, sorry. |
| 14:52.54 | unicodesnowman | raptor_, you know I can see google accounts.. |
| 14:52.54 | unicodesnowman | stop. |
| 14:53.34 | raptor_ | <PROTECTED> |
| 14:53.42 | ignacio | raptor_, ... |
| 14:53.44 | YashM | lol |
| 14:54.11 | raptor_ | Why give open access?!? |
| 14:54.16 | MarcTannous | I'm off to study for exams guys |
| 14:54.17 | MarcTannous | good luck |
| 14:54.21 | raptor_ | LOL |
| 14:54.23 | MarcTannous | It's been a great journey |
| 14:54.36 | MarcTannous | I for one learned to work on Linux so I've got that going |
| 14:54.37 | MarcTannous | :D |
| 14:54.49 | ignacio | MarcTannous, you still design backgrounds? |
| 14:54.50 | ignacio | xD |
| 15:17.32 | Notify | 02GCI:atul009 * 6415875447980032 : Ready for review - The work on this task is ready to be reviewed. |
| 15:20.47 | Notify | 02GCI:gjeet * 6415875447980032 : Task Closed - Congratulations, this task has been completed successfully. |
| 15:24.12 | Notify | 02GCI:gjeet * 6415875447980032 : Great work - Hey Atul, nicely done. I really liked it. Also thanks for doing GCI with BRL-CAD. I would like to hear your overall experience in working with BRL-CAD... |
| 15:37.32 | Notify | 02GCI:brlcad * 5895422048468992 : Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to... |
| 15:40.32 | Notify | 02GCI:brlcad * 5895422048468992 : minimum? - I hope you're not just doing the minimum possible to get this task accepted. Please look at the links in more detail and/or come up with different ideas... |
| 16:08.15 | *** join/#brlcad vipulsharma (0e63c454@gateway/web/freenode/ip.14.99.196.84) |
| 16:15.50 | *** join/#brlcad MarcTannous (4f733b36@gateway/web/cgi-irc/kiwiirc.com/ip.79.115.59.54) |
| 16:21.22 | *** join/#brlcad amisha (~amisha@14.139.122.114) |
| 16:40.52 | Notify | 02GCI:rohit_agarwal * 5895422048468992 : Ready for review - The work on this task is ready to be reviewed. |
| 16:43.33 | Notify | 02GCI:rohit_agarwal * 5895422048468992 : None - Sir I blurred the "pixels" in my previous design that makes the change looks more 'smooth'. I also made a new design. Both my designs are included in... |
| 16:56.58 | Notify | 02GCI:adityagulati * 5511203400974336 : Apology - sir, sorry I won't be able to submit the task. Actually due to too much of work in the school I wasn't able to work in the last few days. Sorry... |
| 16:58.17 | *** join/#brlcad nmz787_i (~nmccorkx@134.134.139.70) |
| 17:00.03 | gcibot | Contest is over.... Did you enjoy it :-)? |
| 17:06.48 | raptor_ | I was just 2 weeks), but learned a lot! |
| 17:08.17 | YashM | brlcad, i will continue to do icon tasks in the next few days, just for the kicks ;) |
| 17:08.32 | MarcTannous | I will keep doing the unit tests too :P |
| 17:09.04 | YashM | that's great, i would feel bad to leave this in the middle :/ |
| 17:14.27 | YashM | good night |
| 17:22.47 | *** join/#brlcad FreezingAlt (~FreezingC@135.0.41.14) |
| 17:27.32 | *** join/#brlcad teepee_ (~teepee@gateway/tor-sasl/teepee) |
| 17:45.41 | andromeda-galaxy | I'll finish all ofm y projects, but not for a couple of months, things are about to get quite busy for me... |
| 18:22.19 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) |
| 18:33.33 | *** join/#brlcad nmz787_i1 (~nmccorkx@134.134.139.70) |
| 18:35.24 | *** join/#brlcad amisha (~amisha@14.139.122.114) |
| 18:51.21 | *** join/#brlcad andrei_ (~quassel@188.25.163.57) |
| 18:52.31 | gcibot | Are you afraid of final results? ;-) Who will win? |
| 18:59.47 | nmz787_i1 | for a bot, gcibot is eerily intelligent |
| 19:00.19 | unicodesnowman | andromeda-galaxy, poxip code-out 2014 will have tshirts btw |
| 19:01.30 | ty221 | unicodesnowman: made by me |
| 19:01.34 | ty221 | Using calculator |
| 19:08.41 | MarcTannous | poxip code-out is down :( |
| 19:21.52 | andromeda-galaxy | unicodesnowman: what's 'poxip code-out'? |
| 19:24.46 | andrei_ | does anyone have the link |
| 19:24.50 | andrei_ | for that gci spreadsheet? |
| 19:24.57 | *** join/#brlcad amisha (~amisha@14.139.122.114) |
| 19:25.16 | MarcTannous | https://docs.google.com/spreadsheets/d/1HLYgPnyuXEcWOOQmzE3IMJKuPtFgXdJM7BnErzqbvZY/edit#gid=0 |
| 19:25.20 | MarcTannous | andrei_ : ^ |
| 19:26.08 | andrei_ | my eyes bleed |
| 19:26.16 | andrei_ | what happened to it? |
| 19:28.26 | MarcTannous | idk |
| 19:28.37 | MarcTannous | the admin locked some rows so that people could not troll it |
| 19:34.52 | gcibot | Okay guys. Now GCI is over, is time to hibernate.. :P See you next year :) |
| 19:41.20 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) |
| 20:03.15 | *** join/#brlcad teepee_ (~teepee@gateway/tor-sasl/teepee) |
| 20:53.01 | *** join/#brlcad merzo (~merzo@87-11-132-95.pool.ukrtel.net) |
| 21:28.54 | *** join/#brlcad FreezingAlt (~FreezingC@135.0.41.14) |
| 21:37.32 | *** join/#brlcad nmz787_i (~nmccorkx@134.134.139.70) |
| 21:55.04 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) |
| 23:40.01 | *** join/#brlcad teepee_ (~teepee@gateway/tor-sasl/teepee) |