| 01:37.08 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 01:44.25 | starseeker | blinks - looks like Windows build is working |
| 01:44.33 | starseeker | or compiles, at least |
| 01:45.28 | Notify | 02GCI:arnav * 5765799415382016 Create a BRL-CAD presentation template: Ready for review - The work on this task is ready to be reviewed. |
| 01:47.41 | starseeker | grumble... ctest can't find the test executables on Windows |
| 01:47.43 | starseeker | figures |
| 02:21.12 | Notify | 02GCI:gjeet * 6359310477033472 Design a banner for our Facebook page (and/or other social media sites) #3: No worries - Hey Mongoose, no worries, your designs are good and shall be considered when... |
| 02:27.52 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 02:36.06 | Notify | 02GCI:gjeet * 6169030943571968 Design a new website landing page for BRL-CAD #9 http://www.google-melange.com/gci/task/view/google/gci2014/6169030943571968: None Hey skyler, here's my review for... |
| 02:37.45 | Notify | 02GCI:gjeet * 4967862338846720 Fix any failing unit test #8: Task Assigned - This task has been assigned to Szkocsovszki Zsolt. You have 100 hours to complete this task, good luck! |
| 02:53.38 | Notify | 02GCI:eames * 4938019295461376 Design a new website favicon! #10: None - After working with BRL-CAD I think my problem revolves around the mater command. I read the tutorial, but when I applied it... |
| 03:38.20 | Notify | 02GCI:fazerlicourice71256 * 5230915127083008 Compile BRL-CAD with GCC trunk: Task Claimed - I would like to work on this task. |
| 04:37.10 | *** join/#brlcad infobot (ibot@rikers.org) |
| 04:37.10 | *** topic/#brlcad is Topic for #brlcad: BRL-CAD || http://brlcad.org || logs: http://ibot.rikers.org/%23brlcad/ || Welcome GCI 2014 participants! If you're participating, be patient when asking questions... we're very busy and sometimes have packed schedules. We will respond if you are still on IRC: learn screen+irssi. |
| 04:38.08 | Notify | 02GCI:brlcad * 5749084207972352 Model "BRL-CAD" in BRL-CAD #5: bonus points - Bonus points if you can use primitives other than spheres for the subtractions. |
| 04:38.53 | Notify | 02GCI:brlcad * 5765799415382016 Create a BRL-CAD presentation template: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 04:39.28 | Notify | 02GCI:sam_hashim * 4956557716488192 Fix at least 8 spelling mistakes in at least 8 different files #5: Task Claimed - I would like to work on this task. |
| 04:42.43 | Notify | 02GCI:icyjuban * 5173865613361152 Design a web page that overviews the BRL-CAD contributors: Ready for review - The work on this task is ready to be reviewed. |
| 04:46.31 | YashM | What does -H32 in rt do? |
| 04:46.44 | YashM | except slowing down the raytrace |
| 05:08.20 | *** join/#brlcad Michael_Huang (~mike@73.15.169.60) |
| 05:14.24 | Notify | 02GCI:o7p9bxbnyj * 6370679909777408 Fix any failing unit test #9: Test fixing approach - parallel_test() calculates the number that the counter should eventually be incremented to by multiplying... |
| 05:14.34 | Notify | 02GCI:o7p9bxbnyj * 6370679909777408 Fix any failing unit test #9: Ready for review - The work on this task is ready to be reviewed. |
| 05:40.26 | *** join/#brlcad javampire (~javampire@v10024.1blu.de) |
| 05:40.26 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 05:40.26 | *** join/#brlcad yiyus (1242712427@je.je.je) |
| 05:40.26 | *** join/#brlcad ChanServ (ChanServ@services.) |
| 05:40.26 | *** join/#brlcad MarcTannous_ (5679c4d5@gateway/web/freenode/ip.86.121.196.213) |
| 05:40.26 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) |
| 05:40.26 | *** join/#brlcad maths22 (~maths22@66-118-151-70.static.sagonet.net) |
| 05:40.26 | *** join/#brlcad Stragus (~alexis@modemcable090.29-19-135.mc.videotron.ca) |
| 05:40.26 | *** join/#brlcad witness___ (uid10044@gateway/web/irccloud.com/x-vbxojkxzogwdpzky) |
| 05:40.26 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) |
| 05:40.26 | *** join/#brlcad andromeda-galaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
| 05:40.26 | *** join/#brlcad ignacio (~IgnacioUy@unaffiliated/ignaciouy) |
| 05:40.26 | *** join/#brlcad Ch3ck (~Ch3ck@66-118-151-70.static.sagonet.net) |
| 05:40.26 | *** join/#brlcad hsrai_ (~hsrai@66-118-151-70.static.sagonet.net) |
| 05:40.26 | *** join/#brlcad KimK (~Kim__@ip68-102-30-143.ks.ok.cox.net) |
| 05:40.26 | *** join/#brlcad Vijfhoek (quassel@46.249.37.134) |
| 05:40.26 | *** join/#brlcad ejno (~ejno@unaffiliated/kazaik) |
| 05:40.26 | *** join/#brlcad n_reed (~molto_cre@66-118-151-70.static.sagonet.net) |
| 05:40.26 | *** join/#brlcad starseeker (~starseeke@66-118-151-70.static.sagonet.net) |
| 05:40.26 | *** join/#brlcad brlcad (~sean@66-118-151-70.static.sagonet.net) |
| 05:40.26 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) |
| 05:40.26 | *** join/#brlcad cox (~quassel@188.226.208.53) |
| 05:40.26 | *** mode/#brlcad [+o ChanServ] by asimov.freenode.net |
| 05:41.56 | *** join/#brlcad kanzure (~kanzure@unaffiliated/kanzure) |
| 05:42.39 | *** join/#brlcad infobot (ibot@rikers.org) |
| 05:42.39 | *** topic/#brlcad is Topic for #brlcad: BRL-CAD || http://brlcad.org || logs: http://ibot.rikers.org/%23brlcad/ || Welcome GCI 2014 participants! If you're participating, be patient when asking questions... we're very busy and sometimes have packed schedules. We will respond if you are still on IRC: learn screen+irssi. |
| 05:46.39 | *** join/#brlcad notify-web (~notify-we@192.30.252.37) |
| 05:46.39 | notify-web | [13web] 15sofathitesh opened pull request #3: Modified files for theme (06master...06master) 02http://git.io/xKn6mQ |
| 05:46.39 | *** part/#brlcad notify-web (~notify-we@192.30.252.37) |
| 05:48.42 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) |
| 05:48.42 | *** join/#brlcad jrullman (sid54856@gateway/web/irccloud.com/x-ylriypzytfczntut) |
| 05:48.43 | *** join/#brlcad Michael_Huang (~mike@2601:9:740:44:407d:3051:25cb:547b) |
| 05:53.55 | *** join/#brlcad javampir1 (~javampire@unaffiliated/javampire) |
| 05:54.54 | Notify | 02GCI:frgnvola * 5213338241859584 Fix at least 8 spelling mistakes in at least 8 different files: Task Claimed - I would like to work on this task. |
| 05:54.59 | Notify | 02GCI:neel2ak * 5625032667561984 Design a new website landing page for BRL-CAD #8: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 05:58.10 | Notify | 03BRL-CAD Wiki:Ssfrgnvola * 0 /wiki/User:Ssfrgnvola: |
| 06:00.59 | *** join/#brlcad Michael_Huang (~mike@2601:9:740:44:407d:3051:25cb:547b) |
| 06:00.59 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) |
| 06:00.59 | *** join/#brlcad jrullman (sid54856@gateway/web/irccloud.com/x-ylriypzytfczntut) |
| 06:03.14 | MarcTannous_ | brlcad: you around? |
| 06:22.05 | MarcTannous_ | need someone to help me with some ifdefs, please |
| 06:23.20 | Stragus | What's the issue? |
| 06:24.34 | MarcTannous_ | http://www.google-melange.com/gci/task/view/google/gci2014/6449379632218112 |
| 06:24.34 | gcibot | Create an utility library (LIBBU) API unit test for bomb.c |
| 06:24.34 | gcibot | Status: NeedsWork |
| 06:24.34 | gcibot | Mentor(s): Mandeep Kaur, Daniel_R |
| 06:24.38 | MarcTannous_ | check out Sean's last comment |
| 06:24.51 | MarcTannous_ | I am using fork() to create a child process to kill, so that I can get his return code |
| 06:24.59 | MarcTannous_ | And that works on any OS besides windows |
| 06:25.23 | MarcTannous_ | from what I understand, he wants me to wrap that function inbetween an #ifdef HAVE_UNISTD_H which makes sense |
| 06:25.28 | MarcTannous_ | instead of checking for windows |
| 06:25.37 | MarcTannous_ | but I do not understand what Sean means by using undef |
| 06:26.58 | Stragus | He's suggesting you can disable HAVE_UNISTD_H, just for testing purposes, to see if your code compiles fine even when unistd.h is not present |
| 06:28.54 | MarcTannous_ | wouldn't that happen in the #else ? |
| 06:28.57 | MarcTannous_ | of an # |
| 06:29.02 | MarcTannous_ | #ifdef haveunistdh |
| 06:29.37 | Stragus | Yes. He's suggesting you can test the #else path on your machine, just for testing, by temporarily disabling HAVE_UNISTD_H |
| 06:29.57 | MarcTannous_ | how would the general syntax of that work? |
| 06:30.06 | MarcTannous_ | #ifdef HAVE_UNISTD_H <my test goes here> |
| 06:30.19 | MarcTannous_ | #else return 0; |
| 06:30.29 | MarcTannous_ | because I cannot execute this test on windows |
| 06:30.31 | Stragus | This is really just to make sure that your code will compile and run fine both when HAVE_UNISTD_H is available and when it's not |
| 06:30.38 | MarcTannous_ | discussed that about 2 nights ago with the guys here |
| 06:30.49 | MarcTannous_ | where should the undef UNISTD_H go? |
| 06:31.20 | Stragus | You could put it after the top #includes, before your code, but again it's really just for testing your code |
| 06:31.36 | Stragus | The final version shouldn't have any #undef |
| 06:31.40 | MarcTannous_ | I do not understand how that works though |
| 06:31.55 | MarcTannous_ | I am undefining it and then testing if it is defined? wouldn't that always go to else? |
| 06:32.04 | MarcTannous_ | ooooh and that's the purpose, to just go directly to the other case? |
| 06:32.14 | Stragus | Yes, just to test things |
| 06:32.15 | MarcTannous_ | yeah okay I get it |
| 06:32.18 | Stragus | :) |
| 06:32.18 | MarcTannous_ | thanks |
| 06:32.41 | MarcTannous_ | I thought he wanted both the ifdef and undef in the final version and I did not understand how that would work :) |
| 06:34.00 | Stragus | Yes, that wouldn't make much sense |
| 06:39.44 | *** join/#brlcad mihaineacsu (~mihaineac@92.81.146.140) |
| 06:42.40 | Notify | 02GCI:mihaineacsu29 * 5213338241859584 Fix at least 8 spelling mistakes in at least 8 different files: Task Assigned - This task has been assigned to frgnvola. You have 100 hours to complete this... |
| 06:45.17 | Notify | 02GCI:mjuvekar7 * 5924891446476800 Write manual page documentation (for g-voxel): Ready for review - The work on this task is ready to be reviewed. |
| 06:46.27 | Notify | 02GCI:mjuvekar7 * 5924891446476800 Write manual page documentation (for g-voxel): None - You will need to apply the patch to the current BRL-CAD svn repository (not over the one I submitted... |
| 06:47.16 | Notify | 02GCI:mjuvekar7 * 5924891446476800 Write manual page documentation (for g-voxel): None - You will need to apply the patch to the main BRL-CAD svn trunk (not 'over' the previously submitted patch) |
| 07:01.14 | Notify | 02GCI:adityagulati * 5834136975572992 Design a web page that overviews the BRL-CAD contributors #2: Ready for review - The work on this task is ready to be reviewed. |
| 07:03.40 | Notify | 02GCI:adityagulati * 5834136975572992 Design a web page that overviews the BRL-CAD contributors #2: New File - Sir, I Have Decreased The Size Of The Images And Given One Example Of A Person... |
| 07:04.26 | *** join/#brlcad adityagulati (dfe1d856@gateway/web/cgi-irc/kiwiirc.com/ip.223.225.216.86) |
| 07:27.09 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 07:28.59 | Notify | 02GCI:tannousmarc * 6449379632218112 Create an utility library (LIBBU) API unit test for bomb.c: Testing - Added the ifdef condition, ran "make" in brlcad-build to see if there are any issues. ... |
| 07:33.38 | MarcTannous_ | Any mentor around for some quick feedback ( not necessarily to close a task ) ? |
| 07:34.56 | Notify | 02GCI:tannousmarc * 6449379632218112 Create an utility library (LIBBU) API unit test for bomb.c: Ready for review - The work on this task is ready to be reviewed. |
| 07:36.57 | *** join/#brlcad YashM_ (~YashM@117.215.33.143) |
| 07:50.36 | *** join/#brlcad ofnlut_ (~ofnlut_@c-68-48-58-20.hsd1.dc.comcast.net) |
| 07:59.05 | Notify | 02GCI:skyhawk * 4639899508539392 Write manual page documentation (for g-jack): Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 08:12.00 | Notify | 02GCI:Melange * 4938019295461376 Design a new website favicon! #10: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 08:15.34 | Notify | 02GCI:shubhamynr22 * 4639899508539392 Write manual page documentation (for g-jack): Task Claimed - I would like to work on this task. |
| 08:19.21 | *** join/#brlcad Gjeet (dfe1d944@gateway/web/cgi-irc/kiwiirc.com/ip.223.225.217.68) |
| 08:22.50 | *** join/#brlcad gjeet (dfe1d944@gateway/web/cgi-irc/kiwiirc.com/ip.223.225.217.68) |
| 08:26.19 | *** join/#brlcad gjeet (dfe1d944@gateway/web/cgi-irc/kiwiirc.com/ip.223.225.217.68) |
| 08:26.39 | Notify | 02GCI:shubhamynr22 * 4639899508539392 Write manual page documentation (for g-jack): Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 08:29.13 | *** join/#brlcad gjeet (dfe1d944@gateway/web/cgi-irc/kiwiirc.com/ip.223.225.217.68) |
| 08:32.36 | Notify | 02GCI:sfurti06 * 5863782450462720 Create a do's and don'ts for GSoC #3: Task Claimed - I would like to work on this task. |
| 08:33.29 | *** join/#brlcad Michael_Huang (~mike@2601:9:740:44:407d:3051:25cb:547b) |
| 08:33.46 | Notify | 02GCI:harman052 * 5863782450462720 Create a do's and don'ts for GSoC #3: Task Assigned - This task has been assigned to Sfurti Dawle. You have 100 hours to complete this task, good luck! |
| 08:49.48 | *** join/#brlcad merzo_ (~merzo@63-5-132-95.pool.ukrtel.net) |
| 08:55.49 | MarcTannous_ | Is any mentor who gives feedback on animations/videos around? |
| 08:55.55 | *** join/#brlcad merzo (~merzo@63-5-132-95.pool.ukrtel.net) |
| 08:56.02 | MarcTannous_ | I have done some tasks in advance, one of them is a motion typography video and want somef eedback |
| 08:57.44 | MarcTannous_ | 1 minute long :d |
| 09:35.55 | Notify | 02GCI:firstof5 * 6187982620983296 Design a new website landing page for BRL-CAD #3: Packages - Can we use pre-made packages suck as Jquery or Bootstrap to complete this task? |
| 09:36.57 | Notify | 02GCI:helix * 6373014107062272 Create a production-quality version of our logo: Task Claimed - I would like to work on this task. |
| 09:40.28 | Notify | 02GCI:harman052 * 6373014107062272 Create a production-quality version of our logo: Task Assigned - This task has been assigned to Yash. You have 100 hours to complete this task, good luck! |
| 09:42.09 | *** join/#brlcad adityagulati (6ac0bb9e@gateway/web/cgi-irc/kiwiirc.com/ip.106.192.187.158) |
| 09:43.33 | Notify | 02GCI:helix * 6373014107062272 Create a production-quality version of our logo: Ready for review - The work on this task is ready to be reviewed. |
| 09:43.33 | *** join/#brlcad adityagulati (6ac0bb9e@gateway/web/cgi-irc/kiwiirc.com/ip.106.192.187.158) |
| 09:45.29 | Notify | 02GCI:helix * 6373014107062272 Create a production-quality version of our logo: How I made - Used Archer to open the logo. Adjusted pin hole size Made the diameter half of the plate diameter. ... |
| 09:53.59 | *** join/#brlcad adityagulati (6ac0b79d@gateway/web/cgi-irc/kiwiirc.com/ip.106.192.183.157) |
| 09:59.15 | Notify | 02GCI:Melange * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 10:04.28 | *** join/#brlcad deepak (~chatzilla@117.220.144.129) |
| 10:31.33 | *** join/#brlcad merzo_ (~merzo@121-12-133-95.pool.ukrtel.net) |
| 10:31.49 | *** join/#brlcad merzo (~merzo@121-12-133-95.pool.ukrtel.net) |
| 10:32.24 | Notify | 02GCI:fazerlicourice71256 * 5230915127083008 Compile BRL-CAD with GCC trunk: None - I have the latest version of gcc, I downloaded, built and installed cmake, downloaded and built brl-cad. But when... |
| 10:32.30 | Notify | 02GCI:davidchoo12 * 5625032667561984 Design a new website landing page for BRL-CAD #8: Task Claimed - I would like to work on this task. |
| 10:36.05 | Notify | 02GCI:deepakkumarsharma * 5625032667561984 Design a new website landing page for BRL-CAD #8: Task Assigned - This task has been assigned to David Choo. You have 100 hours to complete this task, good... |
| 10:37.06 | Notify | 02GCI:fazerlicourice71256 * 5230915127083008 Compile BRL-CAD with GCC trunk: None - IS this all I have to do? Or do I have to figure out the reason for the error, and fix it? |
| 10:39.49 | *** join/#brlcad winghouchan (~winghouch@2.120.155.249) |
| 10:42.56 | Notify | 02GCI:davidchoo12 * 5625032667561984 Design a new website landing page for BRL-CAD #8: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 10:45.36 | Notify | 02GCI:aalok_sathe * 4938019295461376 Design a new website favicon! #10: Task Claimed - I would like to work on this task. |
| 10:52.50 | Notify | 02GCI:deepakkumarsharma * 4938019295461376 Design a new website favicon! #10: Task Assigned - This task has been assigned to Aalok Sathe. You have 100 hours to complete this task, good luck! |
| 10:56.51 | *** join/#brlcad rohitagarwal (0ec2f22b@gateway/web/cgi-irc/kiwiirc.com/ip.14.194.242.43) |
| 10:56.54 | *** join/#brlcad YashM (~YashM@117.198.18.36) |
| 10:57.20 | *** part/#brlcad rohitagarwal (0ec2f22b@gateway/web/cgi-irc/kiwiirc.com/ip.14.194.242.43) |
| 10:57.21 | Notify | 02GCI:wltan * 5866929856184320 Compile BRL-CAD with Tcl/Tk's latest 8.6 sources: Ready for review - The work on this task is ready to be reviewed. |
| 10:58.26 | *** join/#brlcad rohitagarwal (0ec2f22b@gateway/web/cgi-irc/kiwiirc.com/ip.14.194.242.43) |
| 11:01.18 | *** join/#brlcad chick_ (~capslock@41.205.22.41) |
| 11:08.53 | Notify | 02GCI:fernozzle * 6109916221669376 Implement a UV-mapping callback for extruded sketches (EXTRUDE): Ready for review - The work on this task is ready to be reviewed. |
| 11:20.09 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 11:20.32 | Notify | 02GCI:Melange * 6109916221669376 Implement a UV-mapping callback for extruded sketches (EXTRUDE): No more Work can be submitted - Melange has detected that the deadline has passed and no more work... |
| 11:32.21 | Notify | 02GCI:wltan * 5230915127083008 Compile BRL-CAD with GCC trunk: None - Of course, the best would be to troubleshoot and fix the problem, then submit logs for a successful build (along with what you... |
| 11:35.14 | *** join/#brlcad albertcoder (~albertcod@202.164.45.204) |
| 12:03.57 | Notify | 02GCI:fazerlicourice71256 * 5230915127083008 Compile BRL-CAD with GCC trunk: Ready for review - The work on this task is ready to be reviewed. |
| 12:06.53 | Notify | 02GCI:ch3ck * 5765799415382016 Create a BRL-CAD presentation template: Good work - Could you make the background photo in such a way which does not inhibit the proper viewing of text? The... |
| 12:06.58 | Notify | 02GCI:ch3ck * 5765799415382016 Create a BRL-CAD presentation template: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 12:09.44 | Notify | 02GCI:rohit_agarwal * 5564446986469376 Create a BRL-CAD style guide / cheat sheet #3: Ready for review - The work on this task is ready to be reviewed. |
| 12:11.59 | Notify | 02GCI:rohit_agarwal * 5564446986469376 Create a BRL-CAD style guide / cheat sheet #3: 2 Files Uploaded - I have uploaded two files namely - Design Guideline 1.xcf and Design Guidelines 1.png Hope... |
| 12:16.19 | Notify | 02GCI:ch3ck * 5230915127083008 Compile BRL-CAD with GCC trunk: Good work - Could you please upload the build log files to your drive? In the mean time have you attempted to resolve the build... |
| 12:16.25 | *** join/#brlcad rohitagarwal (73762df1@gateway/web/cgi-irc/kiwiirc.com/ip.115.118.45.241) |
| 12:18.26 | *** join/#brlcad albertcoder (~albertcod@202.164.45.204) |
| 12:18.44 | Notify | 02GCI:ch3ck * 5230915127083008 Compile BRL-CAD with GCC trunk: GCC version - your gcc --version is 4.8.1. have you tried compiling with gcc 4.9.1. that's the latest gcc available to my knowledge. ... |
| 12:18.49 | Notify | 02GCI:ch3ck * 5230915127083008 Compile BRL-CAD with GCC trunk: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy... |
| 12:23.20 | *** join/#brlcad rohitagarwal (73762df1@gateway/web/cgi-irc/kiwiirc.com/ip.115.118.45.241) |
| 12:25.16 | Notify | 02GCI:ch3ck * 5866929856184320 Compile BRL-CAD with Tcl/Tk's latest 8.6 sources: Good work - I see you installed tcl/tk succesffully but it was not turned on during the compilation process. I'm not... |
| 12:25.26 | Notify | 02GCI:ch3ck * 5866929856184320 Compile BRL-CAD with Tcl/Tk's latest 8.6 sources: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to... |
| 12:29.39 | Notify | 02GCI:ch3ck * 5564446986469376 Create a BRL-CAD style guide / cheat sheet #3: Task Closed - Congratulations, this task has been completed successfully. |
| 12:31.30 | Notify | 02GCI:mukulkamboj * 6353662997692416 Design a BRL-CAD splash screen #3: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 12:31.45 | Notify | 02GCI:mukulkamboj * 6353662997692416 Design a BRL-CAD splash screen #3: Task Claimed - I would like to work on this task. |
| 12:32.15 | Notify | 02GCI:deepakkumarsharma * 6353662997692416 Design a BRL-CAD splash screen #3: Task Assigned - This task has been assigned to mukul kamboj. You have 100 hours to complete this task, good luck! |
| 12:34.58 | *** join/#brlcad winghouchan (~winghouch@2.120.155.249) |
| 12:35.16 | Notify | 02GCI:adityagulati * 5834136975572992 Design a web page that overviews the BRL-CAD contributors #2: A Request - Sir, I have finished making another task but am afraid that someone else might take... |
| 12:36.11 | Notify | 02GCI:ch3ck * 6373014107062272 Create a production-quality version of our logo: Nice work - but it's supposed be rendering completely using BRLCAD. is there no way to remove the background from... |
| 12:36.40 | Notify | 02GCI:rohit_agarwal * 6187982620983296 Design a new website landing page for BRL-CAD #3: Task Claimed - I would like to work on this task. |
| 12:37.34 | YashM | ch3ck: no Archer doesnt support alpha channel |
| 12:50.58 | Notify | 02GCI:anshul1 * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Task Claimed - I would like to work on this task. |
| 12:55.58 | MarcTannous_ | Guys can I please get my task reviewed? It's been more or less the same code for 3 days with very minor modifications, should take way less than reviewing websites that were submitted after it |
| 12:58.05 | Notify | 02GCI:ch3ck * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Task Assigned - This task has been assigned to holy. You have 100 hours to complete this task, good luck! |
| 12:58.31 | Ch3ck | YashM: ok |
| 12:58.42 | Ch3ck | that's good work |
| 12:58.59 | Ch3ck | MarcTannous_: let me wrap up with YashM and get to you |
| 12:59.10 | Ch3ck | MarcTannous_: links please |
| 12:59.28 | MarcTannous_ | http://www.google-melange.com/gci/task/view/google/gci2014/6449379632218112 |
| 12:59.28 | gcibot | Create an utility library (LIBBU) API unit test for bomb.c |
| 12:59.29 | gcibot | Status: NeedsReview (45 hrs 35 min) |
| 12:59.29 | gcibot | Mentor(s): Mandeep Kaur, Daniel_R |
| 12:59.35 | MarcTannous_ | and I've got 2-3 tasks I can submit right after that one gets closed |
| 12:59.41 | MarcTannous_ | if you have 5 more minutes |
| 13:00.14 | Notify | 02GCI:ch3ck * 6373014107062272 Create a production-quality version of our logo: Task Closed - Congratulations, this task has been completed successfully. |
| 13:00.23 | Ch3ck | aight MarcTannous_ |
| 13:02.04 | Notify | 02GCI:helix * 5522147732619264 Create a Motion Typography video for BRL-CAD #2: Task Claimed - I would like to work on this task. |
| 13:04.05 | Notify | 02GCI:ch3ck * 5522147732619264 Create a Motion Typography video for BRL-CAD #2: Task Assigned - This task has been assigned to Yash. You have 100 hours to complete this task, good luck! |
| 13:04.35 | Notify | 02GCI:ch3ck * 6187982620983296 Design a new website landing page for BRL-CAD #3: Task Assigned - This task has been assigned to Rohit Agarwal. You have 100 hours to complete this task, good luck! |
| 13:11.28 | MarcTannous_ | ch3ck: is it okay? |
| 13:12.24 | Ch3ck | MarcTannous_: about the _without_undef_? patch |
| 13:12.38 | MarcTannous_ | yeah, that's the one that should be commited |
| 13:12.42 | MarcTannous_ | the withundef is for testing purposes |
| 13:14.42 | Ch3ck | MarcTannous_: first of all the #include <unistd.h> is supposed to be enclosed in the #ifdef HAVE_UNISTD_H |
| 13:14.52 | Ch3ck | that's what sean was saying in his comment |
| 13:15.35 | MarcTannous_ | that would work? :O |
| 13:15.40 | Ch3ck | this patch will still return an error if unistd.h is not in the system during compile time |
| 13:16.29 | MarcTannous_ | So if I include unistd after ifdef, it will also work on windows machines? |
| 13:16.37 | *** join/#brlcad deepak (~chatzilla@117.220.174.157) |
| 13:16.46 | Ch3ck | at least for code clarity there should be some significant space separating the headers from the first funtion test_bu_exit() |
| 13:17.34 | MarcTannous_ | working on it, should take less than a minute |
| 13:17.42 | *** join/#brlcad mihaineacsu (~mihaineac@92.85.30.25) |
| 13:17.43 | Ch3ck | MarcTannous_: it should work if properly done |
| 13:19.14 | MarcTannous_ | ch3ck: I think sys/types.h and sys/wait.h should also be included inbetween the ifdef and else |
| 13:19.15 | MarcTannous_ | right? |
| 13:19.33 | Ch3ck | and MarcTannous_ test_bu_exit() should some how be called in the main() |
| 13:19.51 | MarcTannous_ | it is called |
| 13:19.53 | Ch3ck | functions don't get executed if not called from the main |
| 13:20.00 | MarcTannous_ | in the switch |
| 13:20.17 | MarcTannous_ | <PROTECTED> |
| 13:20.43 | Ch3ck | yeah sorry i see it |
| 13:21.01 | Ch3ck | and besides your code should have some comment about what its doing |
| 13:21.27 | Ch3ck | what this unit test does and what is expected with pass/fail cases |
| 13:21.39 | Ch3ck | MarcTannous_: you see what i'm saying? |
| 13:22.07 | MarcTannous_ | yes, I'm writing what everything does |
| 13:23.13 | Ch3ck | MarcTannous_: so the unistd.h should be called in special preprocessing statement as sean explained in his comment |
| 13:23.18 | Ch3ck | like |
| 13:23.37 | MarcTannous_ | #ifdef HAVE_UNISTD_H #include <unistd.h> #include <sys/types.h> #include <sys/wait.h> |
| 13:23.37 | Ch3ck | #if HAVE_UNISTD_H |
| 13:23.51 | Ch3ck | <PROTECTED> |
| 13:23.55 | MarcTannous_ | any difference between ifdef and if? |
| 13:24.17 | Ch3ck | yeah |
| 13:24.49 | Ch3ck | #ifdef is used by the preprocessor |
| 13:24.59 | Ch3ck | like the #define and stuff |
| 13:25.15 | Ch3ck | if works regularly during the code execution |
| 13:27.51 | MarcTannous_ | check bu_bomb_revision |
| 13:28.02 | MarcTannous_ | fixed what you said, added explanations for all the important parts |
| 13:28.18 | Notify | 02GCI:mihaineacsu29 * 5834136975572992 Design a web page that overviews the BRL-CAD contributors #2: None - Aditya, Images are still the focus of your design. As Sean mentioned, most of the... |
| 13:28.27 | MarcTannous_ | and now unistd,types & wait are only included if HAVE_UNISTD_H is true |
| 13:28.34 | Notify | 02GCI:mihaineacsu29 * 5834136975572992 Design a web page that overviews the BRL-CAD contributors #2: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the... |
| 13:29.10 | Notify | 02GCI:fazerlicourice71256 * 5230915127083008 Compile BRL-CAD with GCC trunk: None - I uploaded the build log. I'm trying to install and compile using gcc 4.9 |
| 13:29.52 | MarcTannous_ | ch3ck, regarding the approach of the tests, this is what me and a few mentors came up with a few days ago, as besides exitting a child process, there is no way of checking its return status |
| 13:35.18 | MarcTannous_ | hope I did not disturb you |
| 13:35.45 | Ch3ck | nope MarcTannous_ it's fine |
| 13:35.59 | Ch3ck | moves to melange to check the code |
| 13:36.20 | Ch3ck | like the #define and stuf |
| 13:37.41 | MarcTannous_ | sorry it took so many attempts to get it right, first time working with define ifs and conditional library inclusion, was not used to it |
| 13:37.55 | MarcTannous_ | also forking was a concept that I didn't even know existed xD |
| 13:38.16 | Ch3ck | yeah its normal, just check online tutorials on it |
| 13:38.23 | Ch3ck | it's nice using it |
| 13:38.31 | MarcTannous_ | nice but windows ruins everything |
| 13:38.34 | MarcTannous_ | :( |
| 13:38.40 | Ch3ck | lol |
| 13:38.44 | MarcTannous_ | I think it's time to install linux on my pc |
| 13:39.03 | Ch3ck | so are you forced to use windows? MarcTannous_ the earlier te better |
| 13:39.30 | Ch3ck | used windows like 5 years ago dunno how win8 and stuff feels like |
| 13:39.34 | MarcTannous_ | I usually freelance web design, back-end is completely new to me and I am pretty much forced to have windows/osx on my machine |
| 13:39.47 | MarcTannous_ | but should be able to have windows and linux on it by tomorrow |
| 13:39.56 | MarcTannous_ | using a VM is painful and slowly killing me from the inside |
| 13:40.28 | Ch3ck | aight, yeah it sucks alot of RAM, you sure must have alot of it ;) |
| 13:40.50 | MarcTannous_ | I have 8 gigs but running photoshop,illustrator, brackets google chrome and a VM is using it all up |
| 13:41.05 | MarcTannous_ | but I want to keep trying code tasks, so linux is am ust |
| 13:41.08 | MarcTannous_ | a must * |
| 13:41.36 | MarcTannous_ | if you could close my task, please do, as I have a motion typography video I worked hard on to upload before leaving for lunch |
| 13:42.31 | Notify | 02GCI:ch3ck * 5230915127083008 Compile BRL-CAD with GCC trunk: None - Nice, trying installing and compiling from gcc 4.9.2 that should be the latest and let's see how it goes ;) |
| 13:42.55 | Ch3ck | MarcTannous_: just give me some time working on it |
| 13:45.01 | Ch3ck | MarcTannous_: have you read all of sean's comments? |
| 13:45.06 | MarcTannous_ | yes |
| 13:45.09 | Ch3ck | tell me what you understood |
| 13:45.16 | MarcTannous_ | was there something I missed? |
| 13:45.24 | Ch3ck | number the responses |
| 13:45.39 | Ch3ck | yeah, you missed something |
| 13:45.57 | Ch3ck | i have not even tested the code just reading throught |
| 13:46.11 | Ch3ck | s/throught/through/ |
| 13:46.29 | Ch3ck | read all the comments on the task and tell me what you understand MarcTannous_ |
| 13:46.48 | MarcTannous_ | 1) I should be consistent in code writing style |
| 13:47.22 | MarcTannous_ | 2) I should only add the stuff I modified for this task into the patch ( did not know I can use svn diff path before ) |
| 13:47.23 | Ch3ck | is listening/reading? ;) |
| 13:47.49 | MarcTannous_ | 3) Too many headers, tried to narrow them down to the ones needed |
| 13:48.27 | MarcTannous_ | 4) Code needs to be portable, work on all machines no matter the OS |
| 13:48.40 | MarcTannous_ | What did I miss? |
| 13:50.56 | Ch3ck | MarcTannous_: ok |
| 13:51.17 | Ch3ck | look at his first comment, last paragraphy |
| 13:53.17 | Ch3ck | s/paragraphy/paragraph/ |
| 13:53.25 | Ch3ck | MarcTannous_: what does it say? |
| 13:55.12 | *** join/#brlcad wltan (~wltan@101.127.134.59) |
| 13:57.26 | MarcTannous_ | oh yes I saw that but it does not make sense for me |
| 13:57.30 | MarcTannous_ | let me explain why |
| 13:57.42 | Ch3ck | ok |
| 13:57.58 | MarcTannous_ | if I wrapped the entire contents of test_bu_exit in that |
| 13:58.03 | Ch3ck | give me what you understand |
| 13:58.18 | MarcTannous_ | I could only run test_bu_exit, in its current state on UNIX machines |
| 13:58.43 | MarcTannous_ | for Windows, I'd have to make a whole different function |
| 13:58.56 | MarcTannous_ | and the syntax of the entire program would change as I |
| 13:59.11 | MarcTannous_ | would have something like case 1 : |
| 13:59.33 | MarcTannous_ | #if HAVE_UNISTD_H return test_bu_exit_unix(); #else return test_bu_exit_windows(); |
| 13:59.44 | MarcTannous_ | not even sure if that works inside main |
| 14:00.17 | MarcTannous_ | do I make any sense? |
| 14:01.37 | Ch3ck | first of all MarcTannous_ it's wrong to call header files in functions |
| 14:01.58 | MarcTannous_ | is it bad practice or just fails upon compilation? |
| 14:02.03 | Ch3ck | all header files are called at the beginning of the program |
| 14:02.11 | MarcTannous_ | because I ran make when I included unistd in the function and it worked |
| 14:02.46 | Ch3ck | its bad practice and the compiler is supposed to generate a warning at least |
| 14:03.05 | MarcTannous_ | okay so the if goes at the beginning |
| 14:03.13 | Ch3ck | as sean says can you write a preprocessor function? |
| 14:03.16 | MarcTannous_ | what do I do then with the functions? one for windows one for unix? |
| 14:03.25 | MarcTannous_ | not sure what that is, let me google it up really quick |
| 14:04.11 | Ch3ck | MarcTannous_: you should not use system dependent headers in te code, since it raises portability issues |
| 14:04.13 | MarcTannous_ | you mean stuff like this https://www.eskimo.com/~scs/cclass/int/sx6a.html ? |
| 14:04.50 | MarcTannous_ | ch3ck: regarding that, I spoke to a few other mentors and they said that I should go with fork(), because this test is pretty particular, as it effectively exits the process |
| 14:05.04 | Ch3ck | yup MarcTannous_ |
| 14:05.40 | MarcTannous_ | I've no idea about writing preprocessor functions |
| 14:06.02 | MarcTannous_ | what are your intended changes? |
| 14:06.07 | *** join/#brlcad mihaineacsu (~mihaineac@92.85.30.25) |
| 14:06.33 | Ch3ck | yeah that's ok but you should embed all what is in test_bu_exit() in a preprocessor function together with the #ifdef HAVE_... |
| 14:06.56 | MarcTannous_ | and how would I call that function in main? |
| 14:07.15 | Ch3ck | let me cook something up and show |
| 14:07.18 | MarcTannous_ | thank you |
| 14:07.36 | Ch3ck | MarcTannous_: you don't it runs at preprocessing time |
| 14:07.52 | MarcTannous_ | but |
| 14:07.58 | MarcTannous_ | how would that work with all the other tests |
| 14:07.58 | Ch3ck | the way #define works |
| 14:07.59 | MarcTannous_ | what |
| 14:08.09 | Ch3ck | it should |
| 14:08.19 | Ch3ck | probably generate a return type |
| 14:08.20 | MarcTannous_ | Yeah, that makes sense but that would really be different than all the other tests |
| 14:08.45 | Ch3ck | that's why it's unique ;) |
| 14:08.56 | MarcTannous_ | damn I'll never finish this task |
| 14:08.58 | MarcTannous_ | :)) |
| 14:09.15 | MarcTannous_ | time to read about preprocessing |
| 14:09.27 | Ch3ck | i'll give you an example and you work from there |
| 14:09.36 | Ch3ck | it's not hard :( |
| 14:09.55 | MarcTannous_ | can I also PM you my motion typography video after you send the guidelines for this coding task just for some quick feedback? |
| 14:09.56 | Ch3ck | it's fairly simple you can then show brlcad your work |
| 14:10.17 | Ch3ck | MarcTannous_: sure :) |
| 14:10.41 | MarcTannous_ | I now hate windows for this |
| 14:10.53 | MarcTannous_ | if windows was out of the test cases, this would've run so smoothly |
| 14:11.37 | Ch3ck | MarcTannous_: you have a point there ;), don't know alot of c programmers using windows at my university except some freshmen |
| 14:11.48 | Ch3ck | feels sorry for em |
| 14:11.54 | MarcTannous_ | where are you studying? |
| 14:12.34 | Ch3ck | MarcTannous_: The University of Buea, Cameroon |
| 14:12.48 | MarcTannous_ | Ch3ck, computer sciences? |
| 14:13.35 | Ch3ck | MarcTannous_: www.ubuea.cm, comp engr ;) |
| 14:15.37 | MarcTannous_ | sent you the video link, it's only 4mb. waiting for your guidelines regarding my coding task :D |
| 14:17.36 | Ch3ck | is working on somethx simple |
| 14:18.52 | Notify | 02GCI:mukulkamboj * 6353662997692416 Design a BRL-CAD splash screen #3: Ready for review - The work on this task is ready to be reviewed. |
| 14:22.56 | Ch3ck | MarcTannous_: what i was saying is you could define a macro for the test_bu_exit() |
| 14:24.26 | MarcTannous_ | can you make a quick pastebin as to what the syntax for that would look like, in general terms? |
| 14:29.42 | Ch3ck | yeah |
| 14:31.57 | Ch3ck | MarcTannous_: https://paste.kde.org/poqa0ykff |
| 14:33.15 | Ch3ck | this coe |
| 14:33.23 | Ch3ck | code is just a whip |
| 14:33.33 | Ch3ck | don't hold me responsible :) |
| 14:35.11 | MarcTannous_ | thank you |
| 14:35.15 | MarcTannous_ | did you check out the animation? |
| 14:35.33 | Ch3ck | MarcTannous_: but you get the poin t now right? |
| 14:35.55 | MarcTannous_ | yes, hope it compiles |
| 14:36.09 | Ch3ck | pray too :) |
| 14:36.15 | MarcTannous_ | this is now not bad practice anymore, right? |
| 14:36.22 | Ch3ck | let me check o0ut the an |
| 14:36.29 | Ch3ck | yup |
| 14:36.55 | Ch3ck | let me chk out the animation |
| 14:38.45 | Notify | 02GCI:ch3ck * 6449379632218112 Create an utility library (LIBBU) API unit test for bomb.c: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s)... |
| 14:41.42 | *** join/#brlcad wltan (~wltan@101.127.134.59) |
| 14:55.07 | *** join/#brlcad albertcoder (~albertcod@202.164.45.208) |
| 14:56.34 | Ch3ck | hits the bar |
| 15:06.30 | Notify | 02GCI:judebirch * 5504522529013760 Animate our logo! #10: Recoloured, and remade - I remade it a bit, but I still haven't been able to find a way to make a gif without a url in the corner. |
| 15:06.31 | Notify | 02GCI:judebirch * 5504522529013760 Animate our logo! #10: Ready for review - The work on this task is ready to be reviewed. |
| 15:35.39 | *** join/#brlcad gjeet (3b5bec5a@gateway/web/cgi-irc/kiwiirc.com/ip.59.91.236.90) |
| 15:44.50 | MarcTannous_ | Ch3ck: you still around? there is no fallback on your code |
| 15:45.21 | MarcTannous_ | @any mentors can I do something like : if(condition) declare x=13; else declare x=12;? |
| 15:45.32 | MarcTannous_ | at a preprocessor level |
| 15:46.38 | Notify | 02GCI:gjeet * 5504522529013760 Animate our logo! #10: None - Congratulations with this you have successfully completed your third task. Keep up the good work. |
| 15:46.47 | Notify | 02GCI:gjeet * 5504522529013760 Animate our logo! #10: Task Closed - Congratulations, this task has been completed successfully. |
| 15:46.54 | MarcTannous_ | gjeet: do you know if I can do that? |
| 15:48.04 | MarcTannous_ | nevermind, found a better solution |
| 15:48.53 | Notify | 02GCI:judebirch * 5643416469766144 BRL-CAD Promotional Video #3: Task Claimed - I would like to work on this task. |
| 15:49.43 | Notify | 02GCI:harman052 * 5643416469766144 BRL-CAD Promotional Video #3: Task Assigned - This task has been assigned to Jude. You have 100 hours to complete this task, good luck! |
| 15:58.54 | Notify | 02GCI:gjeet * 6353662997692416 Design a BRL-CAD splash screen #3: Hey mukul - I really appreciate your efforts in getting this task well done. Regarding design, I guess previous review by sean is... |
| 15:59.09 | Notify | 02GCI:gjeet * 6353662997692416 Design a BRL-CAD splash screen #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 16:02.36 | *** join/#brlcad adityagulati (dce32db2@gateway/web/cgi-irc/kiwiirc.com/ip.220.227.45.178) |
| 16:04.02 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 16:08.27 | Notify | 02GCI:adityagulati * 5834136975572992 Design a web page that overviews the BRL-CAD contributors #2: Ready for review - The work on this task is ready to be reviewed. |
| 16:09.12 | Notify | 02GCI:gjeet * 5173865613361152 Design a web page that overviews the BRL-CAD contributors: Task Closed - Congratulations, this task has been completed successfully. |
| 16:15.44 | adityagulati | Is There A Way To Know After How Many Tasks Will My Task Be Reviewed, Something Like A Queue Number. |
| 16:15.56 | YashM | no |
| 16:16.23 | MarcTannous_ | I need some C help |
| 16:16.25 | MarcTannous_ | any mentors around? |
| 16:18.20 | gjeet | MarcTannous_: yeah |
| 16:19.06 | MarcTannous_ | gjeet, I spoke with Ch3ck earlier about my task http://www.google-melange.com/gci/task/view/google/gci2014/6449379632218112 and he suggested I implement it as following |
| 16:19.07 | gcibot | Create an utility library (LIBBU) API unit test for bomb.c |
| 16:19.07 | gcibot | Status: NeedsWork |
| 16:19.07 | gcibot | Mentor(s): Mandeep Kaur, Daniel_R |
| 16:19.39 | MarcTannous_ | Insinde an #IFDEF HAVE_UNISTD_H I will define my test, and he showed me a guideline as to how that is done here https://paste.kde.org/poqa0ykff#line-19 |
| 16:20.11 | MarcTannous_ | the problem is, I think I cannot define inside an IFDEF as when I compile I get the error : "'#' is not followed by a macro parameter" on the line where I start my define function |
| 16:20.38 | MarcTannous_ | my current source : https://paste.kde.org/pc3umwpz6 |
| 16:24.02 | gjeet | Let me have a look |
| 16:25.33 | Notify | 02GCI:wltan * 5866929856184320 Compile BRL-CAD with Tcl/Tk's latest 8.6 sources: None - By tcl/tk not being "turned on during the compilation process", I assume you're referring to the last few... |
| 16:25.37 | Notify | 02GCI:wltan * 5866929856184320 Compile BRL-CAD with Tcl/Tk's latest 8.6 sources: Ready for review - The work on this task is ready to be reviewed. |
| 16:35.54 | MarcTannous_ | gjeet, any idea? |
| 16:36.11 | MarcTannous_ | I made a source that works, and passes my tests, can you give me some quick feedback? |
| 16:36.22 | MarcTannous_ | but this is all with macroprocessors, as Ch3ck wanted |
| 16:46.42 | Notify | 02GCI:harman052 * 5834136975572992 Design a web page that overviews the BRL-CAD contributors #2: Read comments carefully - Hi Aditya, The comments of Sean and Mihai are still valid and you are... |
| 16:46.47 | Notify | 02GCI:harman052 * 5834136975572992 Design a web page that overviews the BRL-CAD contributors #2: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the... |
| 16:47.21 | MarcTannous_ | any mentor online? |
| 16:51.34 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 16:53.28 | Notify | 02GCI:adityagulati * 5834136975572992 Design a web page that overviews the BRL-CAD contributors #2: Explanation - Sir, I Have Actually Removed The Need Of Pictures. If You Click The Name, A... |
| 16:53.33 | Notify | 02GCI:adityagulati * 5834136975572992 Design a web page that overviews the BRL-CAD contributors #2: Ready for review - The work on this task is ready to be reviewed. |
| 16:54.57 | *** join/#brlcad deepak (~chatzilla@117.220.174.157) |
| 16:55.58 | *** join/#brlcad Guest40883 (~athome@123.236.127.147) |
| 16:57.39 | Notify | 02GCI:tannousmarc * 6449379632218112 Create an utility library (LIBBU) API unit test for bomb.c: Where do I even start - After my last batch of updates, I spoke to Ch3ck via IRC. He enlightened me... |
| 16:57.44 | Notify | 02GCI:tannousmarc * 6449379632218112 Create an utility library (LIBBU) API unit test for bomb.c: Ready for review - The work on this task is ready to be reviewed. |
| 16:58.15 | MarcTannous_ | this was tough for someone inexperienced in how macroprocessors work |
| 16:58.19 | MarcTannous_ | I can only hope this will work |
| 16:59.03 | MarcTannous_ | Ch3ck: ping here so that you remember to check my task, the define inside an ifdef does not work and raises A LOT of compiling issues, I initalized the function insde the ifdef, and it compiles and the tests both pass. |
| 17:06.37 | Notify | 02GCI:Melange * 4580324218503168 Create a logo press kit #4: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 17:07.27 | Notify | 02GCI:Melange * 5866929856184320 Compile BRL-CAD with Tcl/Tk's latest 8.6 sources: No more Work can be submitted - Melange has detected that the deadline has passed and no more work can be... |
| 17:09.31 | Notify | 02GCI:helix * 5522147732619264 Create a Motion Typography video for BRL-CAD #2: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 17:09.52 | Notify | 02GCI:helix * 4580324218503168 Create a logo press kit #4: Task Claimed - I would like to work on this task. |
| 17:10.22 | Notify | 02GCI:helix * 5522147732619264 Create a Motion Typography video for BRL-CAD #2: None - I will claim this again later. |
| 17:14.03 | *** join/#brlcad winghouchan (~winghouch@2.218.195.157) |
| 17:14.06 | *** join/#brlcad merzo_ (~merzo@121-12-133-95.pool.ukrtel.net) |
| 17:14.26 | *** join/#brlcad merzo (~merzo@121-12-133-95.pool.ukrtel.net) |
| 17:16.50 | *** join/#brlcad winghouchan (~winghouch@2.218.195.157) |
| 17:17.38 | Notify | 02GCI:deepakkumarsharma * 4580324218503168 Create a logo press kit #4: Task Assigned - This task has been assigned to Yash. You have 100 hours to complete this task, good luck! |
| 17:29.31 | MarcTannous_ | well, after 3 days of working on a task I think it's finally approaching completion |
| 17:29.35 | MarcTannous_ | I'm off for the night guys, have fun |
| 17:29.47 | MarcTannous_ | I'm praying that you like my source :D |
| 17:38.34 | winghouchan | MarcTannous_: G'night! |
| 17:42.36 | Notify | 02GCI:aalok_sathe * 4938019295461376 Design a new website favicon! #10: File - I have uploaded file BRLfavicon.gif please check |
| 18:11.46 | *** join/#brlcad ofnlut_ (~ofnlut_@c-68-48-58-20.hsd1.dc.comcast.net) |
| 18:20.04 | Notify | 03BRL-CAD:starseeker * 63729 brlcad/trunk/include/bn/CMakeLists.txt: Fix include CMake for bn |
| 18:29.39 | Notify | 03BRL-CAD:starseeker * 63730 (brlcad/trunk/CMakeLists.txt brlcad/trunk/src/libbn/tests/CMakeLists.txt and 2 others): Per http://public.kitware.com/pipermail/cmake/2014-December/059381.html, switch the style of add_test command so we get resolution of build target names. |
| 18:52.17 | Notify | 03BRL-CAD:starseeker * 63731 (brlcad/trunk/src/libbu/tests/CMakeLists.txt brlcad/trunk/src/libbu/tests/bitv-tests.cmake): Update bitv tests too |
| 18:54.56 | Notify | 03BRL-CAD:starseeker * 63732 brlcad/trunk/CMakeLists.txt: Try -C generator expression for MSVC with ctest... |
| 18:59.39 | Notify | 03BRL-CAD:starseeker * 63733 brlcad/trunk/CMakeLists.txt: Per http://www.cmake.org/cmake/help/v3.0/manual/cmake-generator-expressions.7.html#informational-expressions go with CONFIG instead of CONFIGURATION |
| 19:02.31 | *** join/#brlcad merzo (~merzo@121-12-133-95.pool.ukrtel.net) |
| 19:06.28 | Notify | 02GCI:ch3ck * 6449379632218112 : Good work, - We appreciate the effort you've put into this. I'll handle any further problems with this. Thanks |
| 19:06.43 | Notify | 02GCI:ch3ck * 6449379632218112 : Task Closed - Congratulations, this task has been completed successfully. |
| 19:08.28 | Notify | 02GCI:ch3ck * 5866929856184320 : Deadline extended - The deadline of the task has been extended with 1 days and 0 hours. |
| 19:09.28 | Notify | 02GCI:tannousmarc * 5522147732619264 : Task Claimed - I would like to work on this task. |
| 19:10.54 | Notify | 02GCI:deepakkumarsharma * 5522147732619264 : Task Assigned - This task has been assigned to Marc Tannous. You have 100 hours to complete this task, good luck! |
| 19:11.06 | *** join/#brlcad Verlet64 (56bfee5f@gateway/web/freenode/ip.86.191.238.95) |
| 19:11.30 | Verlet64 | Hi |
| 19:11.59 | Notify | 02GCI:ch3ck * 5866929856184320 : Good work - I'll test the code and see. Thanks for the effort |
| 19:12.29 | Notify | 02GCI:tannousmarc * 5522147732619264 : still learning - Sorry in advance if there are some illustrating errors, I am still learning After Effects, and motion typography animations are usually... |
| 19:16.36 | starseeker | closes in |
| 19:17.25 | Notify | 03BRL-CAD:starseeker * 63734 brlcad/trunk/src/libbu/tests/vls-tests.cmake: Update vls tests' add_test style. |
| 19:28.01 | starseeker | Here's the tally of the unit tests (not the regression testss) run on Windows: http://paste.lisp.org/display/144693 |
| 19:29.25 | Notify | 03BRL-CAD:starseeker * 63735 brlcad/trunk/src/libgcv/CMakeLists.txt: Missed one test when converting to new style. |
| 19:30.11 | starseeker | the basename failures are clear - basename isn't available on Windows |
| 19:30.40 | starseeker | not sure what to do about that... brlcad? |
| 19:31.21 | starseeker | the others are less clear... |
| 19:34.13 | *** join/#brlcad sofat (~sofat@202.164.45.208) |
| 19:39.01 | starseeker | 626 was just configuration error, and is addressed by r63735 |
| 19:41.39 | starseeker | here is the verbose output from the others: http://paste.lisp.org/display/144694 |
| 19:44.03 | starseeker | as far as I know, that's the first time any of those tests has ever been run on Windows |
| 19:44.55 | Notify | 02GCI:ljudusika * 5749084207972352 : Ready for review - The work on this task is ready to be reviewed. |
| 19:45.40 | *** join/#brlcad Ljudusika (5f6f9eaf@gateway/web/freenode/ip.95.111.158.175) |
| 19:46.20 | Notify | 02GCI:tannousmarc * 5522147732619264 : Ready for review - The work on this task is ready to be reviewed. |
| 19:46.41 | Ljudusika | Hi! |
| 19:48.03 | Ljudusika | I`m GCI contestant. My mentors are Isaac Kamga, Dishank. Are anybody of them here? |
| 19:48.58 | Ljudusika | https://www.google-melange.com/gci/task/view/google/gci2014/5749084207972352 |
| 19:48.59 | gcibot | Model "BRL-CAD" in BRL-CAD #5 |
| 19:48.59 | gcibot | Status: NeedsReview (2 days 18 hrs 9 min) |
| 19:48.59 | gcibot | Mentor(s): Isaac Kamga, Dishank |
| 20:01.30 | *** join/#brlcad deepak (~chatzilla@117.220.174.157) |
| 20:14.07 | Notify | 02GCI:ljudusika * 5749084207972352 : My previous task - About bonus points. In my previous task you can see, that I can use primitives other than spheres for the adding, subtractions etc. :) |
| 20:14.42 | Notify | 02GCI:ljudusika * 5749084207972352 : Previous task URL - https://www.google-melange.com/gci/task/view/google/gci2014/4797643658100736 |
| 20:14.43 | gcibot | Model "BRL-CAD" in BRL-CAD #2 |
| 20:14.43 | gcibot | Status: Closed |
| 20:14.43 | gcibot | Mentor(s): Hardeep Singh Rai, Ch3ck |
| 20:32.52 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 21:04.22 | *** join/#brlcad ofnlut_ (~ofnlut_@c-68-48-58-20.hsd1.dc.comcast.net) |
| 22:53.28 | *** join/#brlcad ofnlut_ (~ofnlut_@c-68-48-58-20.hsd1.dc.comcast.net) |
| 23:55.39 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |