| 00:13.51 | Notify | 03BRL-CAD:n_reed * 63653 brlcad/trunk/src/libged/draw.c: move duplicate code to function |
| 01:27.27 | *** join/#brlcad Maitreya (~Maitreya@122.163.236.2) |
| 01:43.23 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 01:45.29 | Notify | 03GCI:Melange * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 02:00.53 | Notify | 03GCI:jatinluthra14 * 5236107205672960 Design a new website favicon! #6: Hi - Please check. |
| 02:25.37 | Notify | 03GCI:neel2ak * 5625032667561984 Design a new website landing page for BRL-CAD #8: Task Claimed - I would like to work on this task. |
| 02:38.50 | Notify | 03GCI:brlcad * 5236107205672960 Design a new website favicon! #6: Task Closed - Congratulations, this task has been completed successfully. |
| 02:39.30 | Notify | 03GCI:brlcad * 5236107205672960 Design a new website favicon! #6: thanks for your efforts - Hi Jatin, this is clearly an improvement over your first attempts, so thank you for your efforts! |
| 02:42.10 | maths22 | starseeker: about buildbot-I'm not sure what happened to it |
| 02:42.12 | Notify | 03BRL-CAD:starseeker * 63654 (brlcad/branches/qtged/AUTHORS brlcad/branches/qtged/CMakeLists.txt and 181 others): Sync with trunk to r63653 |
| 02:42.17 | maths22 | Good new gci task? |
| 02:43.24 | maths22 | ``Erik: I noticed incosistent coloring with notify between gci and svn |
| 02:43.39 | maths22 | should the user + number be colored, or not? |
| 02:45.13 | Notify | 03BRL-CAD:starseeker * 63655 (brlcad/branches/qtged/include/dm.h brlcad/branches/qtged/src/libdm/dm-generic.c brlcad/branches/qtged/src/libtclcad/tclcad_obj.c): Back out 63551, 63553, 63554 and 63556 - probably don't want this in libdm. Maybe a libcad or some such - a language agnostic version of libtclcad? |
| 02:45.34 | starseeker | maths22: it's still installed |
| 02:45.51 | starseeker | just not sure where the specific files for our config ended up |
| 02:46.31 | starseeker | brlcad was saying something earlier about a proper setup needing some admin work, but the files from the previous effort should be around somewhere... |
| 02:46.55 | starseeker | was getting set to start over, but would be more sensible to build off what's been done already if it's available |
| 02:47.34 | starseeker | could be a GCI task, but I was kinda hoping it would be a matter of flicking the "on" switch for what was already done ;-) |
| 02:47.45 | starseeker | then GCI could improve on it |
| 02:48.11 | maths22 | starseeker: I think I found them |
| 02:48.49 | starseeker | maths22: could we move them to a more standard location and get it up and running? |
| 02:49.10 | maths22 | starseeker: want a buildbot user? |
| 02:49.26 | starseeker | uh... not sure what that means |
| 02:49.37 | maths22 | Should I have it run as its own user |
| 02:49.45 | starseeker | ah, probably a good idea |
| 02:49.46 | maths22 | Like I have fisheye running as its own user |
| 02:50.24 | starseeker | was hoping we could have it report to the IRC channel whenever something breaks :-) |
| 02:51.00 | maths22 | We'll get there... |
| 02:52.31 | maths22 | it will be in /home/buildbot |
| 02:52.37 | starseeker | nods |
| 02:52.49 | maths22 | I'll worry about it more later tonight |
| 02:52.56 | starseeker | cool - thanks! |
| 03:05.16 | Notify | 03GCI:brlcad * 6741580216008704 Design a T-Shirt for BRL-CAD #5: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 03:06.31 | starseeker | andromed`: around? |
| 03:07.09 | andromed` | starseeker: I am |
| 03:08.08 | andromed` | why? |
| 03:08.42 | starseeker | was putting together the next Fortran->C task |
| 03:08.48 | starseeker | wanted to make sure I specify the right thing |
| 03:09.08 | starseeker | it was working out how to handle the logic that is currently relying on Fortran namelists? |
| 03:09.34 | andromed` | starseeker: I believe so |
| 03:09.48 | andromed` | the Fortran uses namelists to parse the input, so we need a C function to parse that kind of input |
| 03:10.05 | starseeker | so Fortran input parsing -> C input parsing |
| 03:10.34 | andromed` | basically |
| 03:13.08 | starseeker | alrightie, queued |
| 03:14.31 | starseeker | andromed`: was discussing regex support for db_ls with Sean - if we were to make that a GCI task, it would also need to expose that feature to the users through an ls command option |
| 03:14.36 | starseeker | would that be of interest? |
| 03:14.56 | andromed` | starseeker: might be... |
| 03:15.31 | starseeker | the regex calls in src/librt/search.c should be a decent guide for what's needed |
| 03:15.34 | andromed` | by adding regex support to ls, do you mean ading support for it to list only those objects whose names match a regex? |
| 03:15.40 | starseeker | right |
| 03:15.57 | andromed` | for that matter, using find with -regex might actually be enough to do the job... |
| 03:17.17 | andromed` | sorry, I mean search |
| 03:17.28 | andromed` | the syntax is so similar to find I keep wanting to call search find |
| 03:18.09 | starseeker | it would have been except tcl already has a find |
| 03:18.18 | andromed` | ahhh... |
| 03:18.51 | starseeker | db_ls is easier/more convenient to call if all you want is a simple pattern match listing without any of search's complexities |
| 03:19.33 | andromed` | interesting... |
| 03:20.23 | andromed` | starseeker: db_ls's documentation, at least in raytrace.h, says that it doesn't support the regex syntax yet, so I was just thinking that search might be easier |
| 03:20.32 | starseeker | ah. |
| 03:20.51 | andromed` | i.e. just search '-regex <regex>' with the flat flag set |
| 03:21.14 | Notify | 03GCI:brlcad * 6741580216008704 Design a T-Shirt for BRL-CAD #5: same comments - Hardik, Harmanpreet's comments are still relevant. You improved the image quality, but your design is still using... |
| 03:21.29 | starseeker | nods - that's certainly one approach that will work |
| 03:21.47 | starseeker | search actually uses db_ls under the hood |
| 03:22.04 | Notify | 03GCI:brlcad * 5807729956356096 Design a new website favicon! #7: Task Closed - Congratulations, this task has been completed successfully. |
| 03:22.12 | andromed` | ah... I see it |
| 03:22.52 | andromed` | it looks to me like it just uses ls to get all the top level objects and then print those? |
| 03:23.03 | andromed` | s/print/search through/ |
| 03:23.06 | starseeker | yep |
| 03:24.24 | starseeker | andromed`: just a thought - there's plenty of other stuff to do :-) |
| 03:24.34 | andromed` | true :-) |
| 03:24.47 | starseeker | really likes the idea of translating some of those geometric solutions codes into BRL-CAD |
| 03:24.52 | andromed` | If we do do a task for it, I might try just using search though, seems like the simplest way to do it |
| 03:24.59 | starseeker | some of that may need the convex hull bit I'm working on now |
| 03:25.02 | andromed` | starseeker: those would be fun to do too |
| 03:25.19 | starseeker | andromed`: wouldn't want to use search with db_ls - overkill |
| 03:25.28 | andromed` | hmm? |
| 03:25.37 | andromed` | I just meant in ls.c for the ged_ls cmd, for regexes |
| 03:25.42 | andromed` | since db_ls doesn't do regexes yet |
| 03:25.50 | andromed` | or, alternatively, implement regexes in db_ls and use that |
| 03:25.53 | starseeker | the task would be to add regexes to db_ls :-) |
| 03:26.01 | starseeker | then have ged_ls use it |
| 03:26.08 | andromed` | oh, ok.. sorry, I got db_ls and ged_ls confused |
| 03:26.26 | starseeker | nods - db_ls is the low-level C api, ged_ls handles the user command layers |
| 03:26.44 | starseeker | andromed`: are you running low on code tasks, or are you still good for now? |
| 03:27.03 | andromed` | I am starting to run low... that's why I was inquiring about when the next batch would be up earlier |
| 03:27.45 | starseeker | ah - I'd say go ahead and start on the Fortran parsing bit, if you're game - I've got the task in the queue and it'll pop up once the next update cycle goes out |
| 03:28.01 | andromed` | starseeker: sounds good |
| 03:28.07 | starseeker | and once you've got that the other two Fortran tasks also open up |
| 03:28.46 | starseeker | may just go ahead and pick off the db_ls thing himself - everybody tells me I need to do more regex work for practice... blegh |
| 03:29.00 | andromed` | starseeker: also, do you know when that batch is going up? just to plan... |
| 03:29.10 | starseeker | I don't, sorry |
| 03:29.21 | starseeker | isn't actually a mentor this year |
| 03:29.40 | andromed` | ah well... okay, then! I'll start working on the fortran parsing logic stuff soon |
| 03:29.55 | starseeker | just lending a hand and annoying the locals :-) |
| 03:30.18 | Notify | 03GCI:brlcad * 5221860329390080 Design a new website favicon! #8: Looks good - PankajBora, this looks good (looks GREAT at 8x8) but is a bit fuzzy. Can you make it more crisp, more well-defined... |
| 03:30.23 | Notify | 03GCI:brlcad * 5221860329390080 Design a new website favicon! #8: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 03:30.36 | andromed` | starseeker: thanks for helping anyway then! your advice on these has been really useful... |
| 03:30.46 | starseeker | andromed`: I'll see if I can identify a couple of features from the geometry code that look reasonably self contained |
| 03:31.17 | starseeker | there is one possibility that is already in the tree, but it might be a little on the gnarly side... |
| 03:31.42 | starseeker | src/other/libgdiam |
| 03:32.06 | starseeker | that's what makes our oriented bounding box feature possible currently, but it has a robustness problem |
| 03:32.29 | andromed` | features with problems that would make for good GCI tasks? |
| 03:32.59 | starseeker | possibly - the task would be to finish what I started with switching their convex hull algorithm to the Monotone Chain approach |
| 03:33.21 | starseeker | the code is in there (around line 1524 in gdiam.cpp) but I never got the data flowing correctly through it |
| 03:33.51 | andromed` | sorry, I'm slightly confused... |
| 03:33.53 | starseeker | ideally, the new convex hull code should be able to generate the same outputs as the old |
| 03:34.22 | starseeker | andromed`: my fault - ask questions if you like :-) |
| 03:34.23 | andromed` | I thought that the convex hull implementation was in libbn/chull(3d?).c |
| 03:34.35 | starseeker | ah. gdiam is a 3rd party code |
| 03:34.49 | Notify | 03GCI:brlcad * 5535110749224960 Stub in a new 'mesh' command for creating/editing NMG and BoT polygonal mesh geometry: Task Needs More Work - One of the mentors has sent this task back for more... |
| 03:35.02 | starseeker | lgpl v2 license - with that license, we don't snarf it in directly into our libraries |
| 03:35.10 | starseeker | preserves our flexibility |
| 03:35.22 | starseeker | so it lives in src/other |
| 03:35.26 | andromed` | ah, okay. so the idea is to implement another chull algorithm in libbn for more flexibility |
| 03:35.27 | andromed` | makes esnse |
| 03:35.30 | andromed` | *sense |
| 03:35.49 | Notify | 03GCI:harman052 * 6741580216008704 Design a T-Shirt for BRL-CAD #5: Little refinements - Hi Hardik, I appreciate that you are putting lot of efforts in this task and it's really good that you... |
| 03:35.52 | starseeker | well, you might be able to do that, but ideally we don't want the src/other code to depend on libbn |
| 03:36.15 | starseeker | there is some code here: http://geomalgorithms.com/a10-_hull-1.html that should do what we need |
| 03:36.34 | starseeker | the minimally impacting change would be to replace the code in gdiam.cpp with that code |
| 03:36.49 | starseeker | that's what I started to do, but I never got it working properly |
| 03:37.18 | andromed` | right... I just mean that your effort on getting src/libbn/chull*.c is a separate project.. |
| 03:37.23 | starseeker | yes |
| 03:38.02 | starseeker | chull.c was done a while back for some NURBS work, and chull3d.c is being done to round out the convex hull feature set with a 3D algorithm |
| 03:38.08 | andromed` | ahh... |
| 03:38.20 | starseeker | gdiam is separate - that's a library that we use for fast oriented bounding boxes |
| 03:38.38 | andromed` | right... makes sense |
| 03:39.08 | starseeker | http://sarielhp.org/research/papers/00/diameter/diam_prog.html |
| 03:39.30 | starseeker | author was nice enough to allow it to go to LGPL for license - was GPL |
| 03:39.39 | andromed` | ahh... |
| 03:40.44 | starseeker | I don't know for sure that the monotonic chain will address all the weaknesses we've seen, but the one that's there has a fit with really simple shapes (near-degenerate angles that cause ordering issues... long story) |
| 03:40.55 | andromed` | interesting... |
| 03:40.59 | andromed` | that's a shame |
| 03:41.23 | starseeker | so dropping in the softSurfer code (see line 1603) may be able to fix the issue |
| 03:42.09 | starseeker | it's got a second problem when the oriented box actually *is* axis aligned, but we can perturb the inputs to avoid that situation if we can just get the robustness issue licked |
| 03:42.18 | andromed` | ahh... |
| 03:42.49 | starseeker | so the task, after all that, boils down to getting the softSurfer code working in gdiam and seeing if it helps matters |
| 03:43.08 | andromed` | right... sounds interesting, at least |
| 03:44.00 | starseeker | if it falls through the geometric solutions code has a minimal bounding code that may also work, but what appealed about gdiam is the algorithm should (in principle) be quite fast |
| 03:44.30 | andromed` | makes sense |
| 03:44.35 | maths22 | starseeker: http://buildbot.brlcad.org/ |
| 03:44.56 | starseeker | woot! |
| 03:45.15 | andromed` | maths22: cool! |
| 03:45.51 | maths22 | andromed`: It is about a year out of date, and probably needs some help, but it runs! |
| 03:46.16 | starseeker | maths22: can you force a build/test to kick off? |
| 03:47.01 | starseeker | nevermind, looks like all the testers are offline |
| 03:47.13 | starseeker | that's awesome looking |
| 03:49.03 | starseeker | maths22: once it's working, we've got a zillion possibilities for customizing the various views in case we run short of design tasks :-) |
| 03:49.19 | starseeker | andromed`: shall I write up the gdiam task? |
| 03:49.20 | andromed` | brlcad: I noticed you marked http://www.google-melange.com/gci/task/view/google/gci2014/5535110749224960 as needing more work, but I can't see any new comments on it; can you give me an idea of what I should change? |
| 03:49.30 | andromed` | starseeker: sure... |
| 03:49.48 | Notify | 03GCI:brlcad * 5535110749224960 Stub in a new 'mesh' command for creating/editing NMG and BoT polygonal mesh geometry: few issues - Few issues noted: The file header on mesh.c is wrong in several... |
| 03:50.06 | andromed` | brlcad: just saw that thanks? |
| 03:53.48 | Notify | 03GCI:o7p9bxbnyj * 5535110749224960 Stub in a new 'mesh' command for creating/editing NMG and BoT polygonal mesh geometry: face_description - I'm addressing the other issues right now; however, for... |
| 03:56.14 | Notify | 03GCI:brlcad * 6363932600041472 Break up large header into smaller headers (include/bn.h): wow! - THIS IS FANTASTIC! Wow, seriously! I figured that whomever worked on this task would almost... |
| 03:56.15 | Notify | 03GCI:brlcad * 6363932600041472 Break up large header into smaller headers (include/bn.h): Task Closed - Congratulations, this task has been completed successfully. |
| 03:56.59 | Notify | 03GCI:o7p9bxbnyj * 5535110749224960 Stub in a new 'mesh' command for creating/editing NMG and BoT polygonal mesh geometry: Ready for review - The work on this task is ready to be reviewed. |
| 03:59.18 | Notify | 03GCI:brlcad * 5733253965152256 Design a prototype CAD GUI layout: Task Closed - Congratulations, this task has been completed successfully. |
| 04:07.50 | Notify | 03GCI:harman052 * 5670223239708672 Design a BRL-CAD splash screen #7: Awesome! - Hi Maitreya, The way you presented your work in highly professional manner is totally awesome. I really liked... |
| 04:07.51 | Notify | 03GCI:harman052 * 5670223239708672 Design a BRL-CAD splash screen #7: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 04:08.03 | starseeker | andromed`: queued up (gdiam) - it may be anything from something simple I just didn't get lined up right to major data incompatibilities |
| 04:08.55 | andromed` | starseeker: great! I'll probably look at the Fortran->C one first, though... just because I've been planing that onef or longer |
| 04:09.02 | starseeker | andromed`: no problem |
| 04:09.27 | starseeker | I wouldn't blame you for dodging the gdiam task - no pressure if it looks like it's too much |
| 04:09.30 | Notify | 03GCI:harman052 * 5670223239708672 Design a BRL-CAD splash screen #7: Deadline extended - The deadline of the task has been extended with 3 days and 0 hours. |
| 04:09.54 | starseeker | I wouldn't have tossed it in except I'm hoping I've got all the right pieces in place and it's down to "wiring it up" |
| 04:10.15 | andromed` | starseeker: sure, I'll let you know if it seems like it's taking too long |
| 04:10.31 | Notify | 03GCI:brlcad * 5733253965152256 Design a prototype CAD GUI layout: nice clean design - Yash, I agree that more images for other aspects of the gui are desirable, but I'm almost certain you spent... |
| 04:11.36 | starseeker | applies the bn header breakout patch and his jaw drops |
| 04:13.49 | starseeker | brlcad: this looks like it's worth applying, if it checks out |
| 04:14.48 | starseeker | wonder how many tasks librt's headers would be... |
| 04:15.57 | Notify | 03GCI:icyjuban * 5173865613361152 Design a web page that overviews the BRL-CAD contributors: Ready for review - The work on this task is ready to be reviewed. |
| 04:16.07 | Notify | 03GCI:Melange * 5173865613361152 Design a web page that overviews the BRL-CAD contributors: No more Work can be submitted - Melange has detected that the deadline has passed and no more work can be... |
| 04:21.27 | Notify | 03GCI:omran_1999 * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Task Claimed - I would like to work on this task. |
| 04:21.48 | Notify | 03GCI:brlcad * 5615680309166080 Design a prototype CAD GUI layout #10: not sure what they all do - Not sure what all those icons do, but they sure do look nice. ;) This design is interesting and... |
| 04:21.49 | Notify | 03GCI:brlcad * 5615680309166080 Design a prototype CAD GUI layout #10: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 04:22.13 | Notify | 03GCI:brlcad * 4938019295461376 Design a new website favicon! #10: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 04:24.28 | Notify | 03GCI:brlcad * 4938019295461376 Design a new website favicon! #10: CAD-relevant - Eames, Thank you for your design. It certainly is the right size and looks nice, but I'm not sure what I'm looking... |
| 04:28.08 | *** join/#brlcad marctannous (bc194881@gateway/web/freenode/ip.188.25.72.129) |
| 04:29.13 | marctannous | good morning guys |
| 04:30.29 | marctannous | http://www.google-melange.com/gci/task/view/google/gci2014/6417935371337728 can my task please be evaluated? has been waiting for review for a good while |
| 04:30.45 | andromed` | marctannous: brlcad is currently going through them all |
| 04:30.54 | andromed` | I believe |
| 04:30.58 | marctannous | oh, he's here? |
| 04:31.01 | marctannous | on IRC? |
| 04:31.24 | andromed` | don't know about IRC, but Notify has showed him reviewing tasks on melange |
| 04:36.57 | Notify | 03GCI:ninzhan * 5303979902763008 Design a web page that overviews the BRL-CAD contributors #3: None - Not the references, but the examples of BRL-CAD websites |
| 04:58.24 | Notify | 03GCI:brlcad * 6417935371337728 Code a Front-end style guide for BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2014/6417935371337728: nice work Marc, this indeed really nice, so... |
| 04:58.25 | Notify | 03GCI:brlcad * 6417935371337728 Code a Front-end style guide for BRL-CAD: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 05:01.16 | Notify | 03GCI:brlcad * 5512189783834624 Design a new website landing page for BRL-CAD #6: Task Closed - Congratulations, this task has been completed successfully. |
| 05:04.49 | Notify | 03GCI:brlcad * 5512189783834624 Design a new website landing page for BRL-CAD #6: outstanding work - Outstanding attention to detail, Akshat. Thank you for your efforts and especially for the... |
| 05:06.30 | Notify | 03GCI:brlcad * 4632172593938432 Write a wiki page on joining the BRL-CAD project: Task Closed - Congratulations, this task has been completed successfully. |
| 05:08.45 | Notify | 03GCI:brlcad * 4632172593938432 Write a wiki page on joining the BRL-CAD project: good improvements all around - Thanks bhargav, it looks like you addressed most of the feedback points very well.... |
| 05:15.00 | *** join/#brlcad ofnlut_ (~ofnlut_@c-68-48-58-20.hsd1.dc.comcast.net) |
| 05:22.52 | Notify | 03GCI:brlcad * 5536439504732160 Animate our logo! #7 http://www.google-melange.com/gci/task/view/google/gci2014/5536439504732160: interesting but chunky Very interesting concept, but a few... |
| 05:22.57 | Notify | 03GCI:brlcad * 5536439504732160 Animate our logo! #7: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the... |
| 05:24.43 | Notify | 03GCI:tannousmarc * 6417935371337728 Code a Front-end style guide for BRL-CAD: Ready for review - The work on this task is ready to be reviewed. |
| 05:25.10 | Notify | 03GCI:brlcad * 4954452779859968 Design a web page that overviews the BRL-CAD contributors #5: Task Closed - Congratulations, this task has been completed successfully. |
| 05:26.21 | Notify | 03GCI:tannousmarc * 6417935371337728 Code a Front-end style guide for BRL-CAD: Fixed - Color changed to the one in the link you provided, now it should be consistent across the page. Added a brief... |
| 05:27.26 | Notify | 03GCI:brlcad * 4954452779859968 Design a web page that overviews the BRL-CAD contributors #5: thought provoking - Devin, thank you for working this. It's very thought-provoking. I particularly like... |
| 05:31.27 | Notify | 03GCI:eames * 4938019295461376 Design a new website favicon! #10: None - Thank you for your feedback. I will incorporate your feedback in the design. |
| 05:35.23 | Notify | 03GCI:devinjohnson1999 * 4954452779859968 Design a web page that overviews the BRL-CAD contributors #5: None - That would be great. The only thing is that I am not the greatest at responsive web... |
| 05:40.28 | Notify | 03GCI:programmingluko * 5818109499801600 Design a BRL-CAD Sticker #14: Task Claimed - I would like to work on this task. |
| 05:40.49 | Notify | 03GCI:brlcad * 5670223239708672 Design a BRL-CAD splash screen #7: stunning thought provoking - Maitreya, it's not often we encounter someone like yourself that goes far above and beyond with a... |
| 05:40.59 | Notify | 03GCI:brlcad * 6366650240598016 Animate our logo! #8: Task Assigned - This task has been assigned to reduceqq. You have 100 hours to complete this task, good luck! |
| 05:41.04 | Notify | 03GCI:brlcad * 5625032667561984 Design a new website landing page for BRL-CAD #8: Task Assigned - This task has been assigned to Neel. You have 100 hours to complete this task, good luck! |
| 05:42.19 | Notify | 03GCI:brlcad * 5535110749224960 Stub in a new 'mesh' command for creating/editing NMG and BoT polygonal mesh geometry: Task Closed - Congratulations, this task has been completed successfully. |
| 05:42.48 | Notify | 03GCI:o7p9bxbnyj * 5309182718771200 Eliminate any library global variable #2: Task Claimed - I would like to work on this task. |
| 05:42.50 | Stragus | As a routine, I think he reviews IRC after checking all tasks |
| 05:44.12 | *** join/#brlcad MarcTannouss (~androirc@109.166.133.212) |
| 05:44.12 | *** join/#brlcad AndroUser2 (~androirc@109.166.133.212) |
| 05:48.14 | Notify | 03GCI:brlcad * 5535110749224960 Stub in a new 'mesh' command for creating/editing NMG and BoT polygonal mesh geometry: It might work - ... it's still work applying some test-driven development... |
| 05:50.00 | Notify | 03GCI:brlcad * 5173865613361152 Design a web page that overviews the BRL-CAD contributors: Deadline extended - The deadline of the task has been extended with 2 days and 2 hours. |
| 05:50.05 | Notify | 03GCI:brlcad * 5173865613361152 Design a web page that overviews the BRL-CAD contributors: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s)... |
| 05:59.11 | Notify | 03GCI:brlcad * 5173865613361152 Design a web page that overviews the BRL-CAD contributors: this looks great but... - Olivia, this is a nice overview page! I like how you based it off of our AUTHORS... |
| 05:59.16 | Notify | 03GCI:brlcad * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Task Assigned - This task has been assigned to omran. You have 100 hours to complete this task, good luck! |
| 05:59.52 | Notify | 03GCI:brlcad * 6417935371337728 Code a Front-end style guide for BRL-CAD: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 06:00.07 | Notify | 03GCI:brlcad * 6417935371337728 Code a Front-end style guide for BRL-CAD: upload - You didn't upload anything. ;) |
| 06:02.02 | Notify | 03GCI:brlcad * 6417935371337728 Code a Front-end style guide for BRL-CAD: typography - Also, with regards to the typography, it could be as simple as saying Open Sans (nothing wrong with... |
| 06:02.17 | Notify | 03GCI:brlcad * 5818109499801600 Design a BRL-CAD Sticker #14: Task Assigned - This task has been assigned to ProgrammingLuko. You have 100 hours to complete this task, good luck! |
| 06:02.37 | Notify | 03GCI:brlcad * 5309182718771200 Eliminate any library global variable #2: Task Assigned - This task has been assigned to Andromeda Galaxy. You have 100 hours to complete this task, good luck! |
| 06:03.57 | Notify | 03GCI:o7p9bxbnyj * 5309182718771200 Eliminate any library global variable #2: Ready for review - The work on this task is ready to be reviewed. |
| 06:09.03 | *** join/#brlcad newbie (~athome@123.236.120.193) |
| 06:09.54 | Notify | 03GCI:tannousmarc * 6417935371337728 Code a Front-end style guide for BRL-CAD: oh damn I'm dumb - I was in a hurry to upload and mark it done before leaving for school, must have missed the upload... |
| 06:10.08 | *** join/#brlcad deepak_ (~chatzilla@202.164.53.117) |
| 06:16.00 | Notify | 03GCI:jatinluthra14 * 5330706074959872 Create an ISST screenshot or animation: Task Claimed - I would like to work on this task. |
| 06:17.15 | Notify | 03GCI:deepakkumarsharma * 5330706074959872 Create an ISST screenshot or animation: Task Assigned - This task has been assigned to Jatin Luthra. You have 100 hours to complete this task, good luck! |
| 06:22.48 | *** join/#brlcad andrei_ (c35a6e7d@gateway/web/freenode/ip.195.90.110.125) |
| 06:23.14 | andrei_ | hello. |
| 06:30.36 | Notify | 03GCI:popescuandrei * 5309182718771200 Eliminate any library global variable #2: None - Andromeda, It looks ok. Needs to be tested, but as a task, really well done :) Congratulations! |
| 06:30.37 | Notify | 03GCI:popescuandrei * 5309182718771200 Eliminate any library global variable #2: Task Closed - Congratulations, this task has been completed successfully. |
| 06:31.41 | Notify | 03GCI:jatinluthra14 * 5330706074959872 Create an ISST screenshot or animation: Hi - Thanks for assigning.Please tell where to get ISST. |
| 06:31.44 | andrei_ | we seem to have more than 100 tasks open :\ |
| 06:37.59 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 06:38.03 | *** join/#brlcad Guest42183 (~athome@123.236.120.193) |
| 06:45.44 | maths22 | starseeker: I launched a manual build |
| 06:46.13 | *** join/#brlcad deepak_ (~chatzilla@202.164.53.117) |
| 06:46.52 | *** join/#brlcad Michael_Huang_ (490fa93c@gateway/web/freenode/ip.73.15.169.60) |
| 06:50.46 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 06:59.50 | maths22 | brlcad: I will make a demo clone; also, is it ok if I get a password set up for the live one? |
| 07:04.30 | brlcad | loves this one from a couple years ago: http://www.shakthimaan.com/downloads/glv/presentations/i-want-2-do-project-tell-me-wat-2-do.pdf |
| 07:07.29 | brlcad | marctannous: there will be plenty of other coding tasks, no worries ... this is only week 2 and 4 more to go after |
| 07:07.56 | andrei_ | why would it be bad to send attachments to mailinglist O_o |
| 07:08.21 | andrei_ | the whole lkml works that way |
| 07:09.56 | maths22 | brlcad: http://brlcad.org/gci-demo/tasks |
| 07:11.07 | Stragus | Eheh brlcad, nice PDF |
| 07:12.15 | brlcad | maths22: that sounds good, in fact if you only have slivers of time with finals, your time is probably better spent working infrastructure (like getting buildbot back up and running proper as a service and/or delegating some web dev tasks to ishwerdas or sofat) |
| 07:16.04 | brlcad | andromed`: andrei_: it's not "Ballistics" .. the origins are the "Ballistic" Research Laboratory (subtle but significant difference) |
| 07:16.25 | *** join/#brlcad deepak (~chatzilla@202.164.53.117) |
| 07:22.05 | Notify | 03GCI:jatinluthra14 * 5330706074959872 Create an ISST screenshot or animation: Ready for review - The work on this task is ready to be reviewed. |
| 07:22.40 | brlcad | maths22: I just caught up with the log and see you already did it, awesome! |
| 07:23.12 | maths22 | brlcad: just had to copy the files, clone the db, and change one config parameter |
| 07:23.19 | brlcad | maths22: yeah, you can password-protect it ;) |
| 07:23.32 | maths22 | brlcad: check your pms |
| 07:23.32 | brlcad | that'll make me stop making database dumps every few days :) |
| 07:27.32 | *** join/#brlcad Guest42183 (~athome@123.236.123.206) |
| 07:28.06 | *** join/#brlcad newbie1234 (~athome@123.236.120.193) |
| 07:32.23 | *** join/#brlcad chick_ (~capslock@41.205.22.41) |
| 07:33.03 | andrei_ | damn, here it's snowing like there's no tommorrow :\ |
| 07:34.11 | *** join/#brlcad notify-web (~notify-we@192.30.252.36) |
| 07:34.11 | notify-web | [13gci-task-manager] 15maths22 pushed 1 new commit to 06master: 02http://git.io/-Cb7zQ |
| 07:34.11 | notify-web | 13gci-task-manager/06master 147a84a22 15Jacob Burroughs: some degree of password protection |
| 07:34.11 | *** part/#brlcad notify-web (~notify-we@192.30.252.36) |
| 07:34.34 | Notify | 03GCI:amshenoy * 5536439504732160 Animate our logo! #7: None - Can you please comment the links so that I can subscribe to such tasks? I was trying to find designing logos and I only found this... |
| 07:35.22 | brlcad | andrei_: cool, literally ;) |
| 07:35.30 | andrei_ | haha |
| 07:36.05 | andrei_ | plans to move to a place where it's always summer |
| 07:36.58 | *** join/#brlcad merzo (~merzo@253-15-132-95.pool.ukrtel.net) |
| 07:58.05 | Notify | 03GCI:rossberg * 5330706074959872 Create an ISST screenshot or animation: None - That's Archer but not ISST. Please look at the directory where you installed BRL-CAD. There you should find in the... |
| 07:58.12 | Notify | 03GCI:rossberg * 5330706074959872 Create an ISST screenshot or animation: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 07:59.08 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) |
| 07:59.58 | maths22 | brlcad: GCI task regarding CDash? |
| 08:00.05 | maths22 | starseeker: see above |
| 08:00.42 | maths22 | http://www.cdash.org/ |
| 08:01.46 | *** join/#brlcad sirnam (~swetha@49.205.215.143) |
| 08:06.08 | *** join/#brlcad chick_ (~capslock@41.205.22.41) |
| 08:09.05 | *** join/#brlcad YashM (~YashM@117.198.11.155) |
| 08:16.02 | Notify | 03GCI:helix * 5733253965152256 Design a prototype CAD GUI layout: None - It took me a solid 7+ hours of work from scratch to make this. I think the icons should be more noticable too which can be... |
| 08:24.27 | *** join/#brlcad newbie1234 (~athome@123.236.120.193) |
| 08:46.07 | *** join/#brlcad sirnam (~swetha@49.205.215.143) |
| 08:58.30 | *** join/#brlcad newbie1234 (~athome@123.236.120.193) |
| 09:04.26 | *** join/#brlcad gjeet (75dcadd8@gateway/web/cgi-irc/kiwiirc.com/ip.117.220.173.216) |
| 09:04.26 | Notify | 03GCI:helix * 5263538490703872 Design a website icon set for brlcad.org #4: Task Claimed - I would like to work on this task. |
| 09:04.57 | Notify | 03GCI:gjeet * 5263538490703872 Design a website icon set for brlcad.org #4: Task Assigned - This task has been assigned to Yash. You have 100 hours to complete this task, good luck! |
| 09:13.50 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) |
| 09:17.20 | *** join/#brlcad merzo (~merzo@user-94-45-58-138-1.skif.com.ua) |
| 09:17.51 | *** join/#brlcad gjeet (75dcadd8@gateway/web/cgi-irc/kiwiirc.com/ip.117.220.173.216) |
| 09:26.08 | Notify | 03GCI:Melange * 6068206720516096 Design a BRL-CAD business card #2: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 09:26.59 | andrei_ | d_rossberg: Hello, did you have time to look over my mails? |
| 09:29.39 | *** join/#brlcad gjeet (75dc915c@gateway/web/cgi-irc/kiwiirc.com/ip.117.220.145.92) |
| 09:38.42 | d_rossberg | andrei_: but only to look at them ;) - i just send a reply to one of your mails |
| 09:39.30 | andrei_ | I've read it, I wanted to make a task for completing/rearanging documentation on it |
| 09:39.34 | andrei_ | that's why I asked |
| 09:39.54 | andrei_ | also, there seems to be a high demand of web dev/fron end/design tasks :\ |
| 09:41.46 | d_rossberg | maybe somebody has an idea how to improve the documentation |
| 09:42.12 | andrei_ | but I do |
| 09:42.37 | andrei_ | complete the description for all primitives, draw a class heirarchy(not necessarily the same task) |
| 09:42.48 | d_rossberg | the "GCI Task Manager" on brlcad.org now requires a password (?) |
| 09:42.52 | andrei_ | yep |
| 09:43.24 | andrei_ | does it work now? |
| 09:44.14 | Notify | 03GCI:akshattripathi * 5512189783834624 Design a new website landing page for BRL-CAD #6: None - It was my pleasure, sir, thanks for the project! :) |
| 09:45.10 | Notify | 03GCI:akshattripathi * 5512189783834624 Design a new website landing page for BRL-CAD #6: None - One last suggestion I wanted to make: there is no logo in the title bar, changing that may make the... |
| 09:45.31 | Notify | 03GCI:Melange * 6648047639461888 Design a BRL-CAD Sticker #10: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 09:49.33 | d_rossberg | yes, a picture of the basic class's hierarchy could be useful, they are discribed prosaci only ("derived from") |
| 09:51.16 | d_rossberg | e.g. there are two basic types of databases: Database and 'const Database'; and two types of writable databases: file and in-memory |
| 09:52.45 | andrei_ | Also, I wasn't able to find the coreinterface logo |
| 09:55.21 | *** join/#brlcad YashM_ (~YashM@117.198.11.155) |
| 09:59.57 | d_rossberg | it hase no logo, but MOOSE would have a potential one |
| 10:01.02 | andrei_ | I m not sure I understand |
| 10:01.09 | andrei_ | should we create a logo based on MOOSE |
| 10:01.16 | andrei_ | I don t know what MOOSE is |
| 10:01.41 | andrei_ | modular object oriented software ... ? |
| 10:02.09 | Notify | 03GCI:jatinluthra14 * 5330706074959872 Create an ISST screenshot or animation: Ready for review - The work on this task is ready to be reviewed. |
| 10:03.12 | d_rossberg | http://sourceforge.net/p/brlcad/mailman/search/?q=moose&mail_list=brlcad-devel |
| 10:04.08 | andrei_ | Okay |
| 10:04.21 | andrei_ | so that's a set of tasks on logo, awesome! |
| 10:04.46 | Notify | 03GCI:mukulkamboj * 6353662997692416 Design a BRL-CAD splash screen #3: Ready for review - The work on this task is ready to be reviewed. |
| 10:05.52 | andrei_ | to sum it up so far it would be the class hierarch task, completing the rest of the primitives ok wiki |
| 10:06.01 | andrei_ | hierarchy* |
| 10:09.50 | Notify | 03GCI:rossberg * 5330706074959872 Create an ISST screenshot or animation: None - I see you found the program. Now load a visually complex and interesting model with lots of polygons and detail and... |
| 10:09.55 | Notify | 03GCI:rossberg * 5330706074959872 Create an ISST screenshot or animation: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 10:15.50 | d_rossberg | there are two major class hierarchies in the core intercase: databases ond objects; you could make up two tasks from them |
| 10:19.23 | andrei_ | alright |
| 10:19.38 | andrei_ | I've seen that there's an effort to have a new website for brlcad |
| 10:19.43 | andrei_ | (lots of task related to it) |
| 10:19.54 | andrei_ | should there be a part for coreinterface as well? |
| 10:21.27 | Notify | 03GCI:Melange * 5821990405406720 Model a toy tank in 3D using BRL-CAD #4: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
| 10:23.29 | d_rossberg | hmm, personally i would prefer to leave it in a wiki |
| 10:23.38 | Notify | 03GCI:gjeet * 6353662997692416 Design a BRL-CAD splash screen #3 http://www.google-melange.com/gci/task/view/google/gci2014/6353662997692416: Hey mukul Good going mukul. Well this design could... |
| 10:23.43 | Notify | 03GCI:gjeet * 6353662997692416 Design a BRL-CAD splash screen #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 10:25.31 | *** join/#brlcad gjeet (75d7e69e@gateway/web/cgi-irc/kiwiirc.com/ip.117.215.230.158) |
| 10:31.59 | *** join/#brlcad YashM (~YashM@117.222.70.240) |
| 10:37.00 | Notify | 03GCI:helix * 5263538490703872 Design a website icon set for brlcad.org #4: None - Icons are in order: home about wiki gallery blog download contact login logout sign up community |
| 10:37.10 | Notify | 03GCI:helix * 5263538490703872 Design a website icon set for brlcad.org #4: Ready for review - The work on this task is ready to be reviewed. |
| 10:38.45 | Notify | 03GCI:gjeet * 5561255020462080 Design a new website landing page for BRL-CAD #4: Hey Chan - I just saw your comment now. Sorry for late response. First of all it's fine to have one responsive... |
| 10:50.13 | Notify | 03GCI:ronaldoh373 * 6741580216008704 Design a T-Shirt for BRL-CAD #5: Ready for review - The work on this task is ready to be reviewed. |
| 10:51.23 | Notify | 03GCI:adityagulati * 5615680309166080 Design a prototype CAD GUI layout #10: Ready for review - The work on this task is ready to be reviewed. |
| 10:59.27 | *** join/#brlcad YashM_ (~YashM@59.95.36.89) |
| 11:00.14 | Notify | 03GCI:winghouchan * 5561255020462080 Design a new website landing page for BRL-CAD #4: None - Thanks for the reply! I may need more time, but I will push up all my work before the time is up, at... |
| 11:02.44 | Notify | 03GCI:popescuandrei * 5561255020462080 Design a new website landing page for BRL-CAD #4: None - You don t need to worry if you don't finish in time. It's something we control entirely, and if you... |
| 11:02.59 | Notify | 03GCI:adityagulati * 5615680309166080 Design a prototype CAD GUI layout #10: New Files - Sir, I have Uploaded a New File and Its psd, With The Changes That You Desired. The Answers To Your... |
| 11:06.16 | *** join/#brlcad mihaineacsu (~mihaineac@92.81.146.140) |
| 11:08.25 | Notify | 03GCI:amshenoy * 5536439504732160 Animate our logo! #7: Ready for review - The work on this task is ready to be reviewed. |
| 11:10.53 | *** join/#brlcad YashM (~YashM@59.95.36.89) |
| 11:16.41 | Notify | 03GCI:manastaneja * 6349681697226752 Create a Motion Typography video for BRL-CAD #3: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 11:22.53 | Notify | 03GCI:harman052 * 6741580216008704 Design a T-Shirt for BRL-CAD #5: Task Closed - Congratulations, this task has been completed successfully. |
| 11:32.50 | *** join/#brlcad mihaineacsu (~mihaineac@92.81.146.140) |
| 11:33.42 | Notify | 03GCI:mihaineacsu29 * 5263538490703872 Design a website icon set for brlcad.org #4: Task Closed - Congratulations, this task has been completed successfully. |
| 11:35.41 | Notify | 03GCI:mihaineacsu29 * 5263538490703872 Design a website icon set for brlcad.org #4: None - Looking good! Awesome job, Yash! Thanks for your effort ! |
| 11:45.11 | Notify | 03GCI:mihaineacsu29 * 5536439504732160 Animate our logo! #7 http://www.google-melange.com/gci/task/view/google/gci2014/5536439504732160: None The tasks Sean was referring to are those marked as... |
| 11:46.58 | marctannous | finally back home |
| 11:47.06 | Notify | 03GCI:popescuandrei * 5615680309166080 Design a prototype CAD GUI layout #10: None - Awesome design, Aditya, thanks for providing the explanation regarding the commands. Well done ! We re courious... |
| 11:47.16 | Notify | 03GCI:popescuandrei * 5615680309166080 Design a prototype CAD GUI layout #10: Task Closed - Congratulations, this task has been completed successfully. |
| 11:47.19 | andrei_ | you like the weather, huh? |
| 11:47.42 | marctannous | not so much |
| 11:48.02 | Notify | 03GCI:popescuandrei * 5536439504732160 Animate our logo! #7: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy... |
| 11:48.23 | marctannous | I don't want to be rude but.. |
| 11:48.25 | marctannous | http://www.google-melange.com/gci/task/view/google/gci2014/5615680309166080 |
| 11:48.32 | marctannous | this is very heavily inspired on my work |
| 11:48.51 | marctannous | I mean even the same buttons and color changing options, which were not featured initially in Archer are now there |
| 11:49.33 | marctannous | http://www.google-melange.com/gci/task/view/google/gci2014/5290439682818048 |
| 11:49.37 | marctannous | compare them side by side |
| 11:49.40 | marctannous | ... |
| 11:54.23 | Notify | 03GCI:jackbigtuper * 4580324218503168 Create a logo press kit #4: Task Claimed - I would like to work on this task. |
| 12:00.29 | andrei_ | Marc, this is not competive design. The completition of a task means the student has put enough effort into it, while improving his/her work based on our feedback |
| 12:01.19 | andrei_ | Besides, design in itself is a subjective matter. |
| 12:01.32 | marctannous | the icons are literally the same |
| 12:04.32 | Notify | 03GCI:shardulc * 6423086379302912 Write manual page documentation (for g-dot): Task Claimed - I would like to work on this task. |
| 12:06.04 | Notify | 03GCI:jatinluthra14 * 5330706074959872 Create an ISST screenshot or animation: Ready for review - The work on this task is ready to be reviewed. |
| 12:06.05 | Notify | 03GCI:rohit_agarwal * 6391627891343360 Animate our logo! #4: Ready for review - The work on this task is ready to be reviewed. |
| 12:07.45 | Notify | 03GCI:adityagulati * 6068206720516096 Design a BRL-CAD business card #2: Task Claimed - I would like to work on this task. |
| 12:08.30 | Notify | 03GCI:rohit_agarwal * 6391627891343360 Animate our logo! #4: Files Uploaded - I have uploaded 4 files - Animation.xcf/.gif Animation Loop.xcf/.gif 'Animation Loop' is a version of 'Animation'... |
| 12:09.11 | *** join/#brlcad Rohit (~Ravi@49.203.247.169) |
| 12:12.32 | andrei_ | so, yeah |
| 12:12.35 | andrei_ | it could've had more work |
| 12:12.39 | andrei_ | but he also worked enough on it |
| 12:18.59 | *** part/#brlcad Guest96052 (~Ravi@49.203.247.169) |
| 12:19.13 | Notify | 03GCI:mukulkamboj * 6353662997692416 Design a BRL-CAD splash screen #3: Ready for review - The work on this task is ready to be reviewed. |
| 12:21.08 | Notify | 03GCI:ronaldoh373 * 6648047639461888 Design a BRL-CAD Sticker #10: Task Claimed - I would like to work on this task. |
| 12:27.19 | starseeker | maths22: awesome! |
| 12:36.32 | Notify | 03GCI:moret * 5793865080504320 Compile BRL-CAD on Windows using Cygwin: Ready for review - The work on this task is ready to be reviewed. |
| 12:38.34 | starseeker | maths22: in buildbot's routine, we want to replace "make test" with "make check" |
| 12:39.38 | starseeker | make test runs all ctest tests, which is too much (regress was recently switched to using ctest, and some known non-working tests are also defined - they're excluded from the "make check" and "make regress" tests, but I have no way to define them and still exclude them from "make test" - CMake controls that one) |
| 12:40.43 | starseeker | just added "make check" to avoid this issue, so it looks like it'll be a timely arrival |
| 12:42.05 | starseeker | maths22: really nice work getting that back up and running :-) |
| 12:48.24 | Notify | 03GCI:wltan * 5866929856184320 Compile BRL-CAD with Tcl/Tk's latest 8.6 sources: Task Claimed - I would like to work on this task. |
| 12:48.35 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 12:50.04 | ``Erik | maths22: yeh, I could change it to be the same as commits... I was also thinking about picking a different color to help differentiate between a commit and a task update... (anyone else have thoughts? it's a bikeshed, so I'm sure you all have paint opinions :D ) |
| 12:52.45 | *** join/#brlcad sirnam (~swetha@49.205.215.143) |
| 12:53.24 | starseeker | agrees different color to differentiate commits and task updates, but has no particular color suggestions |
| 12:55.16 | ``Erik | will wait until after lunch and see if there're any strong opinions *shrug* :) |
| 13:02.00 | *** join/#brlcad infobot (ibot@rikers.org) |
| 13:02.00 | *** topic/#brlcad is Topic for #brlcad: BRL-CAD || http://brlcad.org || logs: http://ibot.rikers.org/%23brlcad/ || Welcome GCI 2014 participants! If you're participating, be patient when asking questions... we're very busy and sometimes have packed schedules. We will respond if you are still on IRC: learn screen+irssi. |
| 13:03.27 | Notify | 03GCI:pricey1600 * 5264182400253952 Categorize all of BRL-CAD's commands into a spreadsheet: Task Claimed - I would like to work on this task. |
| 13:05.09 | Notify | 03GCI:tannousmarc * 6417935371337728 Code a Front-end style guide for BRL-CAD: Ready for review - The work on this task is ready to be reviewed. |
| 13:06.34 | Notify | 03GCI:popescuandrei * 4580324218503168 Create a logo press kit #4: Task Assigned - This task has been assigned to Jack Matthews. You have 100 hours to complete this task, good luck! |
| 13:06.44 | Notify | 03GCI:popescuandrei * 6423086379302912 Write manual page documentation (for g-dot): Task Assigned - This task has been assigned to shardulc. You have 100 hours to complete this task, good luck! |
| 13:06.59 | Notify | 03GCI:popescuandrei * 6068206720516096 Design a BRL-CAD business card #2: Task Assigned - This task has been assigned to Aditya Gulati. You have 100 hours to complete this task, good luck! |
| 13:07.14 | Notify | 03GCI:popescuandrei * 6648047639461888 Design a BRL-CAD Sticker #10: Task Assigned - This task has been assigned to hardik. You have 100 hours to complete this task, good luck! |
| 13:07.34 | Notify | 03GCI:popescuandrei * 5866929856184320 Compile BRL-CAD with Tcl/Tk's latest 8.6 sources: Task Assigned - This task has been assigned to wltan. You have 100 hours to complete this task, good luck! |
| 13:07.39 | Notify | 03GCI:popescuandrei * 5264182400253952 Categorize all of BRL-CAD's commands into a spreadsheet: Task Assigned - This task has been assigned to Pricey1600. You have 100 hours to complete this task,... |
| 13:09.37 | *** join/#brlcad adityagulati11 (dce32db2@gateway/web/cgi-irc/kiwiirc.com/ip.220.227.45.178) |
| 13:09.47 | adityagulati11 | hi |
| 13:10.35 | andrei_ | adityaguatill: hello |
| 13:10.47 | andrei_ | adityagulati11, sorry |
| 13:11.18 | adityagulati11 | are you a mentor |
| 13:11.42 | andrei_ | yes |
| 13:11.50 | Notify | 03GCI:popescuandrei * 6417935371337728 Code a Front-end style guide for BRL-CAD: None - Looks nice and polished, you did apply Sean's feedback, also consistent with other guides you have done. ... |
| 13:11.52 | andrei_ | and there are several others around |
| 13:11.55 | Notify | 03GCI:popescuandrei * 6417935371337728 Code a Front-end style guide for BRL-CAD: Task Closed - Congratulations, this task has been completed successfully. |
| 13:12.46 | adityagulati11 | could you confirm my request i want to clain a task |
| 13:12.55 | adityagulati11 | http://www.google-melange.com/gci/task/view/google/gci2014/6068206720516096 |
| 13:13.26 | andrei_ | but I did? |
| 13:13.59 | adityagulati11 | yeah thanks. I didn't see it at first |
| 13:14.21 | andrei_ | no problem, you re welcome to hang around and ask if you run into trouble :) |
| 13:14.43 | adityagulati11 | now could you review it, I just uploaded some files |
| 13:15.09 | YashM | Damn aditya, I was going to claim that task |
| 13:15.16 | Notify | 03GCI:adityagulati * 6068206720516096 Design a BRL-CAD business card #2: Ready for review - The work on this task is ready to be reviewed. |
| 13:19.37 | Notify | 03GCI:adityagulati * 6068206720516096 Design a BRL-CAD business card #2: New files - Sir, I have Uploaded a New Design In the Form Of 2 Jpg files and 2 psd files. Hope you like them. Regards, ... |
| 13:19.47 | Notify | 03GCI:popescuandrei * 6068206720516096 Design a BRL-CAD business card #2: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 13:19.52 | Notify | 03GCI:popescuandrei * 6068206720516096 Design a BRL-CAD business card #2: None - Interesting idea, Aditya, looks quite nice! However, here are some suggestions on how to improve it: front: -most... |
| 13:22.08 | Notify | 03GCI:programmingluko * 5818109499801600 Design a BRL-CAD Sticker #14: Ready for review - The work on this task is ready to be reviewed. |
| 13:22.58 | Notify | 03GCI:tannousmarc * 5632476651192320 Create a production-quality version of our logo #4: Task Claimed - I would like to work on this task. |
| 13:23.38 | Notify | 03GCI:popescuandrei * 5632476651192320 Create a production-quality version of our logo #4: Task Assigned - This task has been assigned to Marc Tannous. You have 100 hours to complete this task, good... |
| 13:23.39 | Notify | 03GCI:ronaldoh373 * 6648047639461888 Design a BRL-CAD Sticker #10: Ready for review - The work on this task is ready to be reviewed. |
| 13:25.24 | Notify | 03GCI:helix * 6445094127271936 Create a do's and don'ts for GSoC #4: Task Claimed - I would like to work on this task. |
| 13:26.21 | *** join/#brlcad wltan (~wltan@101.127.134.59) |
| 13:30.33 | Notify | 03GCI:adityagulati * 6068206720516096 Design a BRL-CAD business card #2: Ready for review - The work on this task is ready to be reviewed. |
| 13:30.34 | Notify | 03GCI:rossberg * 5330706074959872 Create an ISST screenshot or animation http://www.google-melange.com/gci/task/view/google/gci2014/5330706074959872: Almost perfect Complex.png shows a nice... |
| 13:30.38 | Notify | 03GCI:rossberg * 5330706074959872 Create an ISST screenshot or animation: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 13:38.42 | Notify | 03GCI:adityagulati * 6068206720516096 Design a BRL-CAD business card #2: New files - Sir, I have Uploaded A Revised Version. Hope You Like It. Regards, Aditya |
| 13:40.13 | Notify | 03GCI:shardulc * 6423086379302912 Write manual page documentation (for g-dot): Author - Hi, All the other files have an 'Author' section. What do I put in the 'Author' section for my file? Do I put... |
| 13:43.11 | marctannous | any mentors around? |
| 13:43.20 | marctannous | I'm getting an error when trying to raytrace a model in Archer |
| 13:43.54 | andrei_ | I ve got a meeting lin like 1 minute but |
| 13:43.59 | andrei_ | paste the error somewhere if it s large |
| 13:44.00 | andrei_ | or here |
| 13:44.03 | andrei_ | it helps more :) |
| 13:44.25 | marctannous | rt: rt_dirbuild(ambSlow=1) failure |
| 13:44.43 | marctannous | when using the command mentioned in the readme.txt rt -c "set ambSlow=1" -c "set ambSamples=256" |
| 13:45.08 | YashM | me too marc |
| 13:45.23 | YashM | does it say object not selected |
| 13:45.41 | YashM | and then something |
| 13:46.12 | marctannous | yashM: any idea on how to change the renderer's background from black? |
| 13:46.41 | YashM | display>background color? |
| 13:47.01 | YashM | if you mean after rendering then no |
| 13:47.11 | marctannous | after rendering |
| 13:47.14 | marctannous | from black to something else |
| 13:47.20 | *** join/#brlcad sofat (~sofat@202.164.45.204) |
| 13:47.28 | YashM | saving as png gives you white background i guess |
| 13:47.56 | Notify | 03GCI:erikg * 5330706074959872 Create an ISST screenshot or animation http://www.google-melange.com/gci/task/view/google/gci2014/5330706074959872: geometry complexity This geometry looks like... |
| 13:48.16 | Notify | 03GCI:rossberg * 5793865080504320 Compile BRL-CAD on Windows using Cygwin http://www.google-melange.com/gci/task/view/google/gci2014/5793865080504320: You have to call the commands in a Cygwin... |
| 13:48.21 | Notify | 03GCI:szkocsovszkizsolt * 4967862338846720 Fix any failing unit test #8: Understanding - My language is hungarian and I don't understand everything on English. Because of that I need some help to... |
| 13:48.22 | Notify | 03GCI:rossberg * 5793865080504320 Compile BRL-CAD on Windows using Cygwin: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this... |
| 13:48.37 | ``Erik | once it's rendered, it's rendered... if you want to have a white background, pass the -C flag to rt |
| 13:49.17 | YashM | how to render a transparent image? |
| 13:49.35 | marctannous | ``Erik : Running on Microsoft Windows C:UsersMarcDocumentsBRLCAD 7.24.0in/rt -M -C -u opendb model; tree C:/Users/Marc/Downloads/logo (1).g~1 /part1.c/mainbase1.r/base1.r/edge2.s part1.c/mainbase1.r/base1.r/edge1.s /part1.c/hole1.r/hole1.s /part1.c/hole2.r/hole2.s /part2.c/hole3.r/hole3.s part2.c/mainbase2.r/base2.r /part1.c/mainbase1.r/base1.r/base1.s; rt: rt_dirbuild(model) failure |
| 13:49.40 | marctannous | this is what I get when running rt -c |
| 13:51.20 | ``Erik | -c is not -C |
| 13:52.23 | marctannous | capital C or lowercase c I get the same error |
| 13:52.34 | ``Erik | YashM: we don't have that ability yet, the intermediate representation is 24b rgb, no alpha channel :/ You can chroma-key it in something like gimp or photoshop to make that happen... |
| 13:52.50 | YashM | but that gives rough edges |
| 13:53.08 | YashM | it can be cut by hand but oh well... |
| 13:53.11 | ``Erik | marctannous: -C takes arguments :D namely, the color in rgb format, like "-C 255/255/255" for pure white |
| 13:53.33 | marctannous | oh, damn |
| 13:53.41 | marctannous | also, it opens up then closes really quick, why is that? |
| 13:54.18 | ``Erik | YashM: yes, and the ability to do it right is half there, but would require a bit of code modfication to make work... probably more than would be appropriate for GCI task |
| 13:54.24 | marctannous | nevermind, fixed that, my bad. |
| 13:54.54 | marctannous | ``Erik : Last question , I swear. what command+parameter do I have to send it for 1024x1024 rendering ? |
| 13:55.52 | *** join/#brlcad mihaineacsu (~mihaineac@92.81.146.140) |
| 13:56.12 | ``Erik | -s 1024 |
| 13:56.21 | marctannous | ty |
| 13:56.32 | ``Erik | if you don't want a square raytrace, you can use, uh, like -n and -W or something? |
| 13:56.42 | ``Erik | they're in the man page |
| 14:03.01 | YashM | Erik, what is this? http://i.imgur.com/NPsxXx7.png |
| 14:04.19 | ``Erik | a tcl error O.o |
| 14:04.33 | YashM | http://i.imgur.com/HCOr6V3.png |
| 14:05.05 | ``Erik | it's saying Archetype doesn't have a fsb member |
| 14:05.56 | ``Erik | if I'm reading it right... I'm not a tcl guy :) (maybe it's Archetype's itk_component member that doesn't have an fsb member) |
| 14:06.41 | YashM | o.O |
| 14:07.56 | YashM | how to write text or something in mged |
| 14:07.58 | YashM | do i draw it |
| 14:08.13 | ``Erik | sorry, YashM, you'll have to wait for someone better equiped to help you with that tcl error |
| 14:08.30 | YashM | Okay |
| 14:08.47 | brlcad | 06:48 < marctannous> this is very heavily inspired on my work <-- marc, open source is about being heavily inspired by and building on each other's work -- be proud, see it as a validation of your more reusable design elements. certainly doesn't at all detract from your effort. |
| 14:09.23 | ``Erik | mged has no native way to display text in an rt image... you can built the glyphs in geometry, or make a texture with the text and bolt it to an arb8, or post-process the image to add it |
| 14:09.48 | YashM | yeah i was making lines and arcs |
| 14:13.12 | ``Erik | s/built/build/ even :) |
| 14:16.20 | adityagulati11 | Are Any Mentors Around |
| 14:17.03 | ``Erik | adityagulati11: nope! |
| 14:17.04 | ``Erik | !ask |
| 14:17.05 | Notify | 03GCI:brlcad * 6068206720516096 Design a BRL-CAD business card #2 http://www.google-melange.com/gci/task/view/google/gci2014/6068206720516096: too many brl-cad's :) Aditya, this is looking... |
| 14:17.11 | Notify | 03GCI:brlcad * 6068206720516096 Design a BRL-CAD business card #2: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 14:17.17 | ``Erik | ~ask |
| 14:17.18 | infobot | Questions in the channel should be specific, informative, complete, concise, and on-topic. Don't ask if you can ask a question first. Don't ask if a person is there; just ask what you intended to ask them. Better questions more frequently yield better answers. We are all here voluntarily or against our will. |
| 14:19.05 | Notify | 03GCI:jatinluthra14 * 5330706074959872 Create an ISST screenshot or animation: hi - I do not understand which window frames |
| 14:23.56 | Notify | 03GCI:brlcad * 6391627891343360 Animate our logo! #4: nice and smooth - Rohit, nice simple smooth animation. However, I'm not sure how/where we'd but this to use with the title text on it.. ideas?... |
| 14:24.06 | Notify | 03GCI:brlcad * 6391627891343360 Animate our logo! #4: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the... |
| 14:25.11 | Notify | 03GCI:wltan * 6363932600041472 Break up large header into smaller headers (include/bn.h): None - Took me about half a day of copy/pasting code into the new headers. Once you get the hang of it,... |
| 14:25.31 | Notify | 03GCI:brlcad * 6445094127271936 Create a do's and don'ts for GSoC #4: Task Assigned - This task has been assigned to Yash. You have 100 hours to complete this task, good luck! |
| 14:26.41 | Notify | 03GCI:mihaineacsu29 * 6423086379302912 Write manual page documentation (for g-dot): None - Hi shardulc! Yes, set the author as "BRL-CAD Team". It will help keep it in line with the other files. |
| 14:26.56 | Notify | 03GCI:jatinluthra14 * 5330706074959872 Create an ISST screenshot or animation: Hi - I've uploaded two more . ISST do not have any window frame I think. |
| 14:27.06 | Notify | 03GCI:jatinluthra14 * 5330706074959872 Create an ISST screenshot or animation: Ready for review - The work on this task is ready to be reviewed. |
| 14:29.51 | Notify | 03GCI:mihaineacsu29 * 5818109499801600 Design a BRL-CAD Sticker #14: None - We like it, that's pretty neat and clean! I checked the .psd file and there is only a flatten layer. Can you post a .psd... |
| 14:30.01 | Notify | 03GCI:mihaineacsu29 * 5818109499801600 Design a BRL-CAD Sticker #14: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 14:30.46 | *** part/#brlcad adityagulati11 (dce32db2@gateway/web/cgi-irc/kiwiirc.com/ip.220.227.45.178) |
| 14:31.03 | *** join/#brlcad YashM (~YashM@117.198.10.30) |
| 14:32.12 | maths22 | starseeker: what do you think about a ctest gci task? |
| 14:33.02 | maths22 | starseeker: I meant CDash |
| 14:34.01 | Notify | 03GCI:wltan * 6363932600041472 Break up large header into smaller headers (include/bn.h): Uploaded the patch - One last thing before this thread gets ignored forever: ... |
| 14:35.08 | maths22 | starseeker: changed to run make test |
| 14:35.20 | maths22 | I mean not run make test-it now will run make check |
| 14:36.02 | Notify | 03GCI:spykidacutez * 4959933829218304 Create a logo press kit #3: Task Claimed - I would like to work on this task. |
| 14:37.10 | sofat | maths22, hello |
| 14:37.10 | Notify | 03GCI:adityagulati * 6068206720516096 Design a BRL-CAD business card #2: Ready for review - The work on this task is ready to be reviewed. |
| 14:37.20 | maths22 | sofat: Hi |
| 14:37.32 | sofat | i want to know about updates regarding website |
| 14:37.35 | maths22 | I'm sorry I didn't get back to you earlier |
| 14:37.37 | sofat | please tell me |
| 14:38.33 | *** join/#brlcad albertcoder (~albertcod@202.164.45.204) |
| 14:38.56 | maths22 | Right now the biggest thing is making users not notice when they switch from http://beta.brlcad.org/wiki/ to http://beta.brlcad.org/wp/ |
| 14:39.15 | maths22 | That is, we need to make the headers look identical, and should try to have similar fonts used in both |
| 14:39.57 | Notify | 03GCI:brlcad * 6363932600041472 Break up large header into smaller headers (include/bn.h): ignored forever? - Haha, we actually keep tabs on the patches submitted via Melange and have processes for... |
| 14:40.15 | marctannous | maths22: I coded a front end stylesheet for that purpose, if it helps you |
| 14:40.26 | brlcad | wltan: welcome, just replied to you :) |
| 14:40.39 | maths22 | marctannous: Did you do it for a GCI task? |
| 14:40.48 | maths22 | If not, we should probably make one you can submit it to. |
| 14:41.00 | marctannous | maths22: yes, but it does not include a nav bar as I thought that one was already implemented |
| 14:41.14 | marctannous | and there would never be a need for a second nav bar |
| 14:41.20 | Notify | 03GCI:adityagulati * 6068206720516096 Design a BRL-CAD business card #2: New Files - Sir, I Have Uploaded New Files And Made The Required Changes. Hope You Like Them. Regards, Aditya |
| 14:41.25 | marctannous | but the font styles are all there |
| 14:41.26 | brlcad | marctannous: YashM: that ambSlow rt command line is intended for outside of mged .. if you run it inside mged, you need to replace the double quotes " with braces { } |
| 14:41.36 | maths22 | Take a look at the two sites: they have very similar nav bars, but they should look identical |
| 14:42.08 | marctannous | maths22: right click what seems off -> inspect element -> copy the attributes of the one you want and paste it into the stylesheet of the other one |
| 14:42.14 | YashM | brlcad, what are those errors I linked to? |
| 14:42.17 | marctannous | maths22: that's the easy, non-optimal way to do it |
| 14:42.59 | maths22 | marctannous: I know that, but the outer css is somewhat different because mediawiki and wordpress have different naming conventions |
| 14:43.09 | maths22 | I mostly haven't gotten to it yet |
| 14:43.27 | marctannous | maths22: can you code directly into CSS in wordpress? |
| 14:43.45 | YashM | yeah marc |
| 14:44.05 | brlcad | YashM: I don't know what you did that led up to that and unfortunately have to run out, so I can't get into it |
| 14:44.14 | YashM | you just go into source code put a tag on it |
| 14:44.16 | brlcad | but I can say that if you're trying to render, just run rt on the command line |
| 14:44.23 | YashM | and put some CSS into code editor with that tag |
| 14:44.25 | brlcad | run man rt in mged to read about it |
| 14:44.37 | YashM | It wasn't render on that |
| 14:45.03 | marctannous | maths22: any idea how I can save a document as.. something in Archer? |
| 14:45.16 | marctannous | I can only save current database |
| 14:45.25 | maths22 | What do you want to save? |
| 14:45.30 | marctannous | brlcad: if you have 30 seconds, same question I addressed to maths22 |
| 14:45.40 | marctannous | a modified version fo the logo.g found on the wiki |
| 14:45.42 | marctannous | of * |
| 14:48.51 | Notify | 03GCI:adityagulati * 6068206720516096 Design a BRL-CAD business card #2: New File - Sir, I Have Uploaded A New Version Of Back In Which I Have Lightened The Logo. Hope You Like It. Regards, ... |
| 14:49.31 | Notify | 03GCI:rossberg * 4959933829218304 Create a logo press kit #3: Task Assigned - This task has been assigned to Ifeanyi Matthew. You have 100 hours to complete this task, good luck! |
| 14:50.47 | Notify | 03GCI:shardulc * 6423086379302912 Write manual page documentation (for g-dot): Ready for review - The work on this task is ready to be reviewed. |
| 14:51.19 | maths22 | What is frong with saving the current database? |
| 14:52.01 | ``Erik | maths22: cdash is installed on the server, no one has taken the time to ever set it up, though (afaik) |
| 14:52.37 | *** join/#brlcad adityagulati (dce32db2@gateway/web/cgi-irc/kiwiirc.com/ip.220.227.45.178) |
| 14:53.30 | adityagulati | Could Any Of The Mentors Review My Task - http://www.google-melange.com/gci/task/view/google/gci2014/6068206720516096 |
| 14:54.24 | marctannous | ``Erik: do you know how to save as in Archer? |
| 14:54.52 | marctannous | want to save a changed version of a database but can't |
| 14:55.31 | ``Erik | marctannous: changes should be auto-saved... if you want two versions, you need to make a copy before you start modifying |
| 14:56.11 | Notify | 03GCI:rossberg * 5330706074959872 Create an ISST screenshot or animation: I depends on the window manager - Which one did you used? You did the screenshots of Archer on Windows. ISST and mged were... |
| 14:56.22 | Notify | 03GCI:rossberg * 5330706074959872 Create an ISST screenshot or animation: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task... |
| 14:57.10 | marctannous | ``Erik : Hope my changes autosaved :-s |
| 14:57.41 | Notify | 03GCI:wltan * 6363932600041472 Break up large header into smaller headers (include/bn.h): so they don't get ignored forever :O - I noticed that Melange content rarely appears on Google web search,... |
| 14:57.48 | ``Erik | marctannous: rt it, that should use the disk version |
| 14:58.25 | ``Erik | rt it from a tty if possible, outside of mged... (if you're using not-windows, it's easy) |
| 14:58.26 | Notify | 03GCI:programmingluko * 5818109499801600 Design a BRL-CAD Sticker #14: Ready for review - The work on this task is ready to be reviewed. |
| 15:02.19 | Notify | 03GCI:tannousmarc * 5632476651192320 Create a production-quality version of our logo #4: How I did it - - Opened it up in Archer - Adjusted pin sizes with scale tool - Raytraced it with "rt -H32... |
| 15:02.24 | Notify | 03GCI:shashank1245 * 5504522529013760 Animate our logo! #10: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 15:02.34 | Notify | 03GCI:tannousmarc * 5632476651192320 Create a production-quality version of our logo #4: Ready for review - The work on this task is ready to be reviewed. |
| 15:05.30 | maths22 | ``Erik: gci task to set up CDash? http://brlcad.org/CDash/index.php |
| 15:05.53 | marctannous | maths22: please tell me that's a web dev task |
| 15:06.09 | maths22 | marctannous: not really |
| 15:06.25 | marctannous | :( |
| 15:06.34 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 15:06.42 | maths22 | It is web related, but it really is about setting up an installation of CTest |
| 15:08.10 | marctannous | will give it a try |
| 15:09.35 | ``Erik | maths22: it's been discussed before... i'm under the impression that ctest generates an xml file, then there's some magic fairy dust and that xml is sent to the cdash site using an http POST? unfortunately, most of the testing stuff does not currently use ctest :) Some does, if we can get that to start working with the site, then a whole slew of new "convert test to ctest" gci tasks opens up |
| 15:10.05 | maths22 | ``Erik: starseeker has been working on that (shifting over to ctest) |
| 15:13.24 | starseeker | possibly of interest: https://groups.google.com/a/chromium.org/forum/#!topic/chromium-os-reviews/2QAh7dVyzek |
| 15:13.58 | ``Erik | maths22: I'm kinda seeing two possible first steps... either we set up cdash to accept correctly and gci the client setup, or we make that cdash setup a gci task and either work with a student or hope they can set it up themselves... |
| 15:14.46 | starseeker | or we take the output ctest generates for cdash and have buildbot do "something sensible" with it |
| 15:15.45 | ``Erik | I can add a trigger to notify to push buildbot or whatever else if that makes sense (there's already a trigger to pump the svn2git) |
| 15:15.48 | maths22 | starseeker: http://www.vtk.org/Wiki/CMake/Testing_With_CTest#Submission_Of_Tests |
| 15:16.13 | maths22 | http://www.vtk.org/Wiki/CMake/Testing_With_CTest#Dashboards |
| 15:17.12 | starseeker | nods - the question is whether we want to use CDash or try to integrate something into buildbot itself, ala https://github.com/rpavlik/jenkins-ctest-plugin |
| 15:18.16 | maths22 | starseeker: I personally think that CDash has a pretty nice interface for what it does; an integrated buildbot thing would not be a bad addition thought |
| 15:18.35 | maths22 | buildbot is great for keeping logs and having binary + - did it work |
| 15:18.45 | starseeker | doesn't have a sense of how hard to set up CDash is... |
| 15:18.57 | maths22 | I also think that CDash will be less work for now, but we can see |
| 15:19.06 | maths22 | I'm going to a final now... |
| 15:19.08 | starseeker | if it's not bad, we could start by setting that up and having the buildbot report link to the appropriate CDash page |
| 15:19.13 | starseeker | nods - good luck! |
| 15:19.17 | ``Erik | me either, really... I'd like to see a single manual pump of the cdash system before trying to wire it to buildbot |
| 15:19.37 | starseeker | agreed |
| 15:20.46 | maths22 | ``Erik: should happen soon now |
| 15:21.17 | Notify | 03GCI:rohit_agarwal * 6391627891343360 Animate our logo! #4: None - Sir, thank you but at the moment I would like to work on other tasks. But if I ever get to make a animation with 360 degree... |
| 15:21.23 | ``Erik | wanders off to do errands, ya'll have fun |
| 15:21.33 | Notify | 03GCI:rohit_agarwal * 6391627891343360 Animate our logo! #4: Ready for review - The work on this task is ready to be reviewed. |
| 15:22.11 | starseeker | maths22: (for when you have time) would it make sense to investigate TravisCI as a resource, or does buildbot make that fairly moot? |
| 15:22.59 | maths22 | I'm not sure what it adds that buildbot doesn't; what do you know of? |
| 15:23.31 | starseeker | I didn't know if they might have computational resources that we could leverage for building |
| 15:23.38 | starseeker | remember some mention of them having macs available |
| 15:25.00 | starseeker | if we can get machines for the platforms we care about testing regularly though, it's probably moot |
| 15:28.37 | Notify | 03GCI:rohit_agarwal * 6391627891343360 Animate our logo! #4: Some ideas - 'Animation' can be used without loop when we open BRL-CAD application and also can be used as a 'waiting screen'. For eg.... |
| 15:31.46 | starseeker | shudders when he thinks about what will be necessary to get regression tests running on Windows... |
| 15:34.46 | starseeker | huh - http://www.cmake.org/pipermail/cmake/2013-July/055299.html |
| 15:38.42 | starseeker | well, it looks like at least one person has done a CTest buildbot class: http://markmail.org/message/qjo7yuf4tcfxmhyg |
| 15:39.39 | adityagulati | Is Any Mentor Online? |
| 15:40.20 | marctannous | adityagulati: not a mentor, but if there is something you need help with and I can do it, please ask |
| 15:41.13 | Notify | 03BRL-CAD:starseeker * 63656 brlcad/trunk/src/libbn/chull3d.c: Experiment with switching to an array of points for input. Hard coded right now. |
| 15:41.23 | adityagulati | Actually I Wanted To Ask If Someone Could Review My Task |
| 15:41.59 | marctannous | as far as I know, tasks are reviewed in FIFO order, and most people are at their jobs right now so it might take a while if you submitted recently |
| 15:42.52 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) |
| 15:43.38 | marctannous | adityagulati: there are no stupid questions, please ask |
| 15:43.56 | starseeker | maths22: ah hah! https://code.google.com/p/drmemory/source/browse/buildbot/master.cfg?r=1023#151 |
| 15:44.27 | Notify | 03BRL-CAD:d_rossberg * 63657 brlcad/trunk/src/bwish/winMain.c: quell include\bsocket.h complaint: "The #include for bio.h must come after this header (Windows Sockets portability)." |
| 15:49.05 | *** join/#brlcad andrei_ (~andrei@188.26.181.202) |
| 15:51.35 | andrei_ | Hello. |
| 15:51.55 | YashM | hi |
| 15:52.13 | Notify | 03GCI:spykidacutez * 4959933829218304 Create a logo press kit #3: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 15:55.04 | Notify | 03GCI:popescuandrei * 5632476651192320 Create a production-quality version of our logo #4: None - Thumbs up uploading the .g ! Looks great! Thanks! |
| 15:55.09 | Notify | 03GCI:popescuandrei * 5632476651192320 Create a production-quality version of our logo #4: Task Closed - Congratulations, this task has been completed successfully. |
| 15:57.14 | Notify | 03GCI:tannousmarc * 5342724534304768 Create a logo press kit #2: Task Claimed - I would like to work on this task. |
| 15:59.29 | Notify | 03GCI:popescuandrei * 5342724534304768 Create a logo press kit #2: Task Assigned - This task has been assigned to Marc Tannous. You have 100 hours to complete this task, good luck! |
| 16:15.47 | Notify | 03GCI:jatinluthra14 * 5330706074959872 Create an ISST screenshot or animation: Ready for review - The work on this task is ready to be reviewed. |
| 16:17.52 | *** join/#brlcad adityagulati (dce32db2@gateway/web/cgi-irc/kiwiirc.com/ip.220.227.45.178) |
| 16:19.38 | Notify | 03GCI:fanel * 4639899508539392 Write manual page documentation (for g-jack): Task Claimed - I would like to work on this task. |
| 16:19.59 | Notify | 03GCI:fanel * 4639899508539392 Write manual page documentation (for g-jack): Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 16:23.59 | Notify | 03GCI:fanel * 4959197779197952 Write manual page documentation (for off-g): Task Claimed - I would like to work on this task. |
| 16:25.50 | Notify | 03GCI:fanel * 4959197779197952 Write manual page documentation (for off-g): Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 16:30.56 | *** join/#brlcad teepee- (bc5c2133@gateway/web/freenode/ip.188.92.33.51) |
| 16:46.51 | Notify | 03GCI:moret * 5793865080504320 Compile BRL-CAD on Windows using Cygwin: CMake in Cygwin shell - Hello, I called CMake in Cygwin shell and there were some errors that caused BRL-CAD build abort. I... |
| 16:49.32 | Notify | 03GCI:devinjohnson1999 * 4954452779859968 Design a web page that overviews the BRL-CAD contributors #5: None - What is the task name? |
| 17:00.50 | Notify | 03GCI:Melange * 5564670123442176 Fix at least 8 spelling mistakes in at least 8 different files #3: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the... |
| 17:02.01 | Notify | 03GCI:maitreyav * 5670223239708672 Design a BRL-CAD splash screen #7: None - Hi, Thanks for your suggestions! I am happy that you liked the project. I too thought that it was weak in addressing... |
| 17:03.17 | *** join/#brlcad chick_ (~capslock@41.205.22.41) |
| 17:04.46 | *** join/#brlcad albertcoder (~albertcod@202.164.45.204) |
| 17:06.31 | Notify | 03GCI:amshenoy * 5536439504732160 Animate our logo! #7: Extras - I'm not sure what more to add or how to improve. Please can you help? |
| 17:12.29 | *** join/#brlcad wl-tan (~wltan@101.127.134.59) |
| 17:15.38 | Notify | 03GCI:amshenoy * 5536439504732160 Animate our logo! #7: Submission - 'BRL square64' is the 64 x 64 version 'BRL square256' is the 256 x 256 version 'BRL3 white in' is the raw version Just... |
| 17:25.32 | *** join/#brlcad konro (~root@169.255.5.130) |
| 17:29.35 | Notify | 03GCI:Melange * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the... |
| 17:29.55 | *** join/#brlcad wl-tan (~wltan@101.127.134.59) |
| 17:35.16 | *** join/#brlcad wltan (~wltan@101.127.134.59) |
| 17:42.18 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 17:46.20 | *** join/#brlcad wltan (~wltan@101.127.134.59) |
| 17:53.41 | *** join/#brlcad wltan (~wltan@101.127.134.59) |
| 17:57.59 | *** join/#brlcad wl-tan (~wltan@101.127.134.59) |
| 18:02.04 | maths22 | starseeker: one nice thing about CDash is that, if we get is set up, any developer can push results to it fairly seamlessly |
| 18:04.28 | andromed` | maths22: should someone add a regress_repository exception for chull3d so that the regression tests pass? |
| 18:05.38 | maths22 | andromed`: I'm not sure, but that would seem reasonable |
| 18:07.01 | andromed` | maths22: I'll check with starseeker and brlcad... |
| 18:07.11 | maths22 | Sounds good |
| 18:07.30 | andromed` | also, for some reason bu_date-time9 and bu_date-time10 don't fail on my machine, do you have any idea why? |
| 18:08.33 | maths22 | starseeker: http://stackoverflow.com/questions/13116488/detailed-guide-on-using-gcov-with-cmake-cdash |
| 18:08.44 | maths22 | Something to think about anyways |
| 18:12.55 | Notify | 03GCI:acprojects * 5522147732619264 Create a Motion Typography video for BRL-CAD #2: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 18:14.44 | Notify | 03GCI:monimont * 5898744557993984 Create a logo press kit: Task Claimed - I would like to work on this task. |
| 18:15.34 | Notify | 03GCI:deepakkumarsharma * 5898744557993984 Create a logo press kit: Task Assigned - This task has been assigned to monimont. You have 100 hours to complete this task, good luck! |
| 18:23.37 | *** join/#brlcad andrei (~andrei@188.26.181.202) |
| 18:29.05 | Notify | 03GCI:kristina97 * 6101246763073536 Create a book layout for Doc Camp Book #3: Ready for review - The work on this task is ready to be reviewed. |
| 18:30.29 | maths22 | http://brlcad.org/CDash/index.php?project=BRL-CAD |
| 18:31.09 | *** join/#brlcad winghouchan (~winghouch@90.209.142.248) |
| 18:31.51 | Notify | 03BRL-CAD:n_reed * 63658 brlcad/trunk/src/libged/draw.c: move duplicate code to function |
| 18:32.57 | *** join/#brlcad winghouchan (~winghouch@90.209.142.248) |
| 18:33.25 | maths22 | I have to say, I like this more than buildbot; we just need a good way to automate this |
| 18:34.24 | maths22 | buildbot has its advantages though, particlarly with svn integraion |
| 18:34.52 | maths22 | I personally think buildbot should include among its tasks uploading to cdash, but that is just my opinion |
| 18:36.27 | starseeker | maths22: we can customize it to do a lot of that, can't we? |
| 18:36.56 | andrei | afaik gerrit / jenkins can auto build ? |
| 18:36.59 | starseeker | maths22, andromed`: don't add a regression exception for chull3d - I'm closing in on updating it, and once I do it should be tested |
| 18:37.59 | Notify | 05GCI:fernozzle * 6109916221669376 Implement a UV-mapping callback for extruded sketches (EXTRUDE): I'm probably missing something, but... - How might this UV mapping differ from the UV mapping... |
| 18:38.40 | maths22 | Starseeker: buildbot requires specially configured slaves |
| 18:38.57 | maths22 | Ctest does not |
| 18:39.08 | starseeker | you mean CDash? |
| 18:39.13 | maths22 | Cdash |
| 18:39.21 | starseeker | Hmm |
| 18:39.43 | starseeker | maths22: I'd suggest discussing the options with brlcad once he's available |
| 18:40.16 | starseeker | my understanding was that CDash didn't have some of the nicer output displays offered by buildbot (waterfall, grid, etc...) |
| 18:42.20 | starseeker | also I think CDash is harder to customize... |
| 18:42.58 | *** join/#brlcad alisha (~alisha@115.245.220.249) |
| 18:44.08 | Notify | 02GCI:veskopos * 6424327624851456 Animate our logo! #2: Ready for review - The work on this task is ready to be reviewed. |
| 18:44.18 | ``Erik | how's that look? |
| 18:44.23 | starseeker | nice! |
| 18:44.51 | starseeker | maths22: however we decide to go, fantastic work getting these up and running |
| 18:45.04 | Notify | 02GCI:veskopos * 6424327624851456 Animate our logo! #2: how to open it - open logo2.gif with browser, to see how its moving. |
| 18:45.20 | ``Erik | will leave it blue until someone complains *shrug* :) |
| 18:45.25 | starseeker | nods |
| 18:45.48 | ``Erik | (mirc users have a white background, so color coding can be tricky bizniz) |
| 18:46.29 | starseeker | ``Erik: thanks again for Notify - really good stuff |
| 18:46.36 | ``Erik | heh, np |
| 18:46.52 | starseeker | feel like rewriting the libdm layer? :-P |
| 18:47.15 | ``Erik | too bad it didn't grab people as a business tool, woulda been awesome as a startup |
| 18:47.22 | starseeker | nods |
| 18:47.39 | starseeker | suspect irc may be too foreign a notion for a lot of 'em |
| 18:47.59 | ``Erik | has an osX utility to work on, book to read, ios app to start, etc... ain't got no time for no libdm crap :) |
| 18:48.09 | starseeker | heh - figured |
| 18:48.11 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 18:48.25 | ``Erik | for the pointy haired types, yeah... thus the web statistics with graphs |
| 18:49.12 | starseeker | sets about applying the libbn header breakout patch... |
| 18:49.17 | ``Erik | (any osX users want to try a beta of what I'm working on? memory graph in the dock with free page and disk buffer purging to manage memory?) |
| 18:52.21 | starseeker | doesn't use mac these days... think our resident mac guru is busy atm, but he'll likely read backlog tonight |
| 18:53.19 | ``Erik | "these days"? heh, there was a day? :D |
| 18:53.56 | starseeker | occasionally, but they seem to keep getting more closed and restricted |
| 18:54.11 | starseeker | plus rather uncivilized notions about how much to change in a minor release... |
| 18:56.00 | starseeker | ``Erik: is there any chance Apple themselves might be interested in such an app as a standard component? |
| 18:56.53 | ``Erik | unlikely, they've removed memory info from their "Activity Monitor.app" |
| 18:57.02 | starseeker | O.o |
| 18:57.31 | ``Erik | replacing the 4 kinds of mem broken down by type/usage with a single "memory pressure" value |
| 18:57.41 | starseeker | what, have they been talking to the Gnome3 design team? |
| 18:58.00 | Notify | 02GCI:tannousmarc * 5342724534304768 Create a logo press kit #2: How I did it - - Had to re-do the Archer step for a higher quality rt, encountered a lot of issues but finally made it. Wanted to... |
| 18:58.28 | ``Erik | "wired? disk cache? compressed vm? what does all this junk mean???" :) |
| 18:58.55 | Notify | 02GCI:tannousmarc * 5342724534304768 Create a logo press kit #2: Ready for review - The work on this task is ready to be reviewed. |
| 18:59.01 | Notify | 03BRL-CAD:starseeker * 63659 brlcad/trunk/src/libbn/chull3d.c: this is how to access vertex indices for faces... |
| 18:59.05 | Notify | 02GCI:moret * 5793865080504320 Compile BRL-CAD on Windows using Cygwin: Ready for review - The work on this task is ready to be reviewed. |
| 18:59.09 | ``Erik | the latest osX does some new weird things with memory management that is completely undocumented by apple, makes things interesting :) |
| 18:59.29 | marctannous | Most repetitive task to date, hope it will get accepted first try as this batch took a looong while to do, I'm going to hug my parents and hope I'll never have to do so many dimensions of the same icons ever again in my life |
| 18:59.31 | marctannous | good bye |
| 18:59.53 | maths22 | Starseeker: what type of customization? |
| 19:01.48 | starseeker | maths22: hopefully, designing our own reporting pages - for example, this page http://buildbot.brlcad.org/builders/brlcad-tester/builds/120 might conceivably incorporate the information from this page: http://brlcad.org/CDash/viewTest.php?onlyfailed&buildid=1 |
| 19:03.02 | maths22 | http://www.vtk.org/Wiki/CDash:FAQ#Can_I_customize_CDash.3F |
| 19:04.05 | starseeker | so, then the question is whether we could duplicate the waterfall view (http://buildbot.brlcad.org/waterfall) in CDash (for example) |
| 19:14.41 | Notify | 02GCI:o7p9bxbnyj * 5554693182849024 Create numerics library (LIBBN) API unit test for axis.c: Task Claimed - I would like to work on this task. |
| 19:20.49 | starseeker | maths22: I'm not tied to any particular solution - whatever works best is fine |
| 19:21.19 | starseeker | if customizing cdash is easier and gets us what we need, I'm all for it. |
| 19:22.09 | starseeker | can CDash message the IRC channel? |
| 19:23.08 | starseeker | maths22: how'd the final go? |
| 19:23.20 | maths22 | It was good |
| 19:23.42 | starseeker | nods - remember those days :-) Always a relief to get those behind you |
| 19:24.06 | starseeker | maths22: apologize if I'm irritating you on the integration stuff - not my intent |
| 19:25.00 | maths22 | Starseeker: I think that buildbot should upload to cdash. Each has its own uses. |
| 19:25.12 | starseeker | nods - that sounds good too |
| 19:25.23 | andromed` | maths22: that was my initial feeling as well |
| 19:25.29 | Notify | 02GCI:deepakkumarsharma * 5554693182849024 Create numerics library (LIBBN) API unit test for axis.c: Task Assigned - This task has been assigned to Andromeda Galaxy. You have 100 hours to complete... |
| 19:27.55 | Notify | 03BRL-CAD:starseeker * 63660 brlcad/trunk/src/libged/bot.c: Checkpoint work done to add a chull option to the bot command before I accidently commit it or revert it... |
| 19:28.50 | andromed` | matahs22: any idea what the rot matrix does for tp_faxis? |
| 19:28.57 | andromed` | tp_3axis |
| 19:29.38 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 19:31.05 | Notify | 02GCI:judebirch * 5806249618702336 Model a toy tank in 3D using BRL-CAD #3: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 19:31.10 | Notify | 02GCI:judebirch * 5504522529013760 Animate our logo! #10: Task Claimed - I would like to work on this task. |
| 19:37.20 | Notify | 03BRL-CAD:brlcad * 63661 brlcad/trunk/src/libgcv/NOTES: write down some initial thoughts on a plan of attack to get to baseline functionality. |
| 19:39.05 | *** join/#brlcad chick_ (~capslock@41.205.22.41) |
| 19:39.36 | *** join/#brlcad alisha (~alisha@123.239.79.125) |
| 19:51.03 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 19:55.36 | Notify | 02GCI:deepakkumarsharma * 5504522529013760 Animate our logo! #10: Task Assigned - This task has been assigned to Jude. You have 100 hours to complete this task, good luck! |
| 19:58.22 | maths22 | starseeker: is it OK if I commit a couple cmake changes to make it upload to cdash? |
| 20:01.30 | starseeker | maths22: sure |
| 20:01.42 | maths22 | Will do soon. |
| 20:02.08 | starseeker | we may want to conditionalize them if they're going to try to send data over the net - a -DBRLCAD_ENABLE_CDASH_REPORTING or some such |
| 20:02.52 | maths22 | starseeker: it creates special targets |
| 20:02.57 | starseeker | ah, better yet |
| 20:03.04 | starseeker | go for it |
| 20:03.07 | maths22 | these targets are called by cdash |
| 20:03.17 | maths22 | I'm just testing first |
| 20:05.40 | starseeker | maths22: I'd suggest for most builds disabling the extra documentation build - we can probably afford to do that once a day or some such, rather than on every build |
| 20:05.50 | starseeker | might make life easer |
| 20:06.01 | maths22 | starseeker: sounds reasonable |
| 20:06.05 | andromed` | maths22, starseekes: sorry to distact from the topic at hand, but do you have any idea what a sane way to test plot3 output to see if it is correct is? |
| 20:06.14 | starseeker | erm |
| 20:06.14 | andromed` | sorry, starseeker |
| 20:06.25 | starseeker | visual inspection? |
| 20:06.30 | andromed` | unit tests? |
| 20:06.39 | andromed` | (libbn/axis.c testing) |
| 20:06.55 | starseeker | I'd say generate some plot files, take a look at them in MGED with the overlay command, and see if they are correct... |
| 20:07.22 | starseeker | if they are, then those files become "ground truth" for the unit tests |
| 20:07.47 | andromed` | hmm.. I tried to look at them with plot3-ps, but it did something very odd to the otuput |
| 20:08.02 | starseeker | well, that may be a bug then :-) |
| 20:08.11 | starseeker | the ps output doesn't get a lot of testing... |
| 20:08.25 | starseeker | I'd try the overlay command in mged |
| 20:08.28 | andromed` | I considered just effectively comparing the files, the only disadvantage of that is that if axis is changed to draw the same lines but in a different pattern it won't work |
| 20:08.30 | andromed` | okay, will do |
| 20:09.31 | starseeker | andromed`: I'd post a note asking what approach would be preferred for that - a straight up "did anything change" diff of two pl files is probably the simplest, but I'm not sure what Sean would be looking for there |
| 20:09.32 | andromed` | hmm... axis may not be working too well.. |
| 20:09.46 | starseeker | andromed`: yeah, you're off in kinda obscure code there :-) |
| 20:10.00 | andromed` | how long has it been since anyone actually used tp_3axis? |
| 20:10.11 | starseeker | couldn't even begin to guess |
| 20:10.14 | andromed` | it doesn't look right at all, but it looks much better than the ps output |
| 20:10.28 | starseeker | unless it's used in one of the MGED views, probably many years |
| 20:10.58 | starseeker | andromed`: that's one of the benefits of that sort of work - shaking out dusty corners of the API :-) |
| 20:11.10 | andromed` | oh well... I'll post a comment on the task asking Sean if he has a preference for a method of testing and then dive into the source |
| 20:11.28 | andromed` | indeed -- and (hopefully) ensuring that they don't become dusty again :-) |
| 20:11.48 | starseeker | that's where coverage testing will eventally be nice to have - right now it's probably just too depressing ;-) |
| 20:11.49 | andromed` | (I like the idea of using gcov w/ the tests to give us an idea of how the coverage is) |
| 20:11.56 | starseeker | definitely |
| 20:12.29 | starseeker | if maths22 can work his magic and turn that on, I'm all for it (even if it does highlight how many tests there are to write still ;-) |
| 20:12.45 | andromed` | it also doesn't help that the documentation isn't too clear... what does it mean by the clockwise or counterclockwise tick orientation? |
| 20:12.55 | starseeker | erm |
| 20:13.04 | maths22 | starseeker: I did some preliminary work with it last year; I'll get that working with ctest soon |
| 20:13.13 | starseeker | maths22: sweet! |
| 20:13.23 | starseeker | andromed`: can you see a difference between the two? |
| 20:13.32 | maths22 | As of last year: http://brlcad.org/coverage/ |
| 20:14.08 | starseeker | sweet! (ouch) |
| 20:14.21 | maths22 | starseeker: do you know why bu_basename_null would be segfaulting? |
| 20:14.28 | andromed` | starseeker: still trying to figure out the rest of te parameters as well |
| 20:14.58 | starseeker | andromed`: yeah, I don't know much about tp_3axis :-/ |
| 20:15.04 | andromed` | oh well... |
| 20:15.09 | starseeker | best I can suggest is to look at it's svn history |
| 20:15.22 | starseeker | trace it back through the commits and see if the commit messages shed any light on it |
| 20:15.29 | andromed` | good idea, thanks |
| 20:15.40 | starseeker | maths22: not offhand - any way to hook gdb to it? |
| 20:15.47 | starseeker | maths22: I'll take a look at the code... |
| 20:17.55 | maths22 | starseeker: it appears thatthat is not acually the issue ... |
| 20:18.36 | starseeker | if the system has a basename implementation that doesn't like a NULL input that *might* be a problem... |
| 20:18.39 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 20:19.02 | maths22 | It fails right after the test |
| 20:20.28 | Notify | 02GCI:o7p9bxbnyj * 5554693182849024 Create numerics library (LIBBN) API unit test for axis.c: Comparing results - I'm not entirely sure what the best way is to compare the results of tp_3axis()... |
| 20:21.04 | maths22 | starseeker: it appears to be that ctest segfaults after running one test |
| 20:21.10 | starseeker | O.o |
| 20:21.18 | starseeker | that's with the CDash setup? |
| 20:21.33 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
| 20:21.48 | maths22 | starseeker: seems not to have to do with cdash-it runs fine on my machine, but not on bz |
| 20:22.26 | starseeker | if you just do a straight-up build and test on bz (no integration testing frameworks) does it still wipe out? |
| 20:22.38 | starseeker | if so, we may need to try boostrapping a newer CMake |
| 20:22.55 | maths22 | lets see... |
| 20:23.23 | maths22 | starseeker: it is already up to date |
| 20:23.28 | maths22 | I'm running a fresh build, and we'll see if that crasehes |
| 20:23.40 | andromed` | on the subject of tests, I noticed earlier that the date-time tests #9and#10 fail on 32-bit and work on 64 because even though bu_utctime() takes a u64, it casts it to a time_t |
| 20:24.37 | maths22 | andromed`: that is why testing on multiple platforms is good |
| 20:25.21 | andromed` | maths22: indeed! Unfortunately, the only way that I can think of ito fix it is to essentially toimplement gmtime() |
| 20:25.36 | marctannous | andromed`: how did you test it for 32-bits and 64-bits? |
| 20:25.55 | maths22 | I'm not familiar enough with what is going on there to help you with an alternate solution. Sorry |
| 20:26.03 | andromed` | marctannous: I have a 64-bit machine, so it was running 64bit on mine, so it didn't fail, but I saw it failing on the buildbot |
| 20:26.14 | andromed` | so I ran through the code a bit and I'm pretty sure that its 32/64 |
| 20:26.25 | marctannous | I'm running a 64bit machine and it fails on my end |
| 20:26.27 | andromed` | in a bit, I'm planning on trying to compile multilib 32bit and test that |
| 20:26.33 | andromed` | the vm's probably 32bit... |
| 20:26.41 | maths22 | andromed`: what is your 32bit example? |
| 20:27.05 | andromed` | maths22: I don't know entirely for sure, but I'm guessing that the debian vm is setup for 32bit so as to run on more platforms |
| 20:27.12 | maths22 | Yes |
| 20:27.13 | andromed` | and it fails there & on the buildslave for your buildbot |
| 20:27.20 | maths22 | andromed`: OK |
| 20:27.25 | andromed` | I'm going to try to multilib build it for 32 on my machine in a bit |
| 20:27.32 | andromed` | marctannous: please don't try to fix that test.... |
| 20:27.44 | starseeker | andromed`: head's up - I'm going to commit the bn header breakout patch |
| 20:28.03 | andromed` | starseeker: great! |
| 20:28.20 | starseeker | can't afford to let that get stale... |
| 20:28.37 | *** join/#brlcad winghouchan (~winghouch@90.209.142.248) |
| 20:28.49 | andromed` | starseeker: found out my parameters were wrong, now the tp_3axis code seems to be working again |
| 20:30.05 | Notify | 03BRL-CAD:starseeker * 63662 brlcad/trunk/include/bn.h: Commit a slight tweaking of http://www.google-melange.com/gci/task/view/google/gci2014/6363932600041472 by Wei Liang Tan that breaks libbn headers up into individual topic specific files. |
| 20:30.11 | starseeker | hah - good. might be worth improving the docs |
| 20:30.32 | starseeker | add what you would have wanted to see when you first looked at tp_3axis ;-) |
| 20:31.15 | andromed` | Sounds good. I'll probably add a small description of ccw, rot, and origin, once I figure out what they do |
| 20:32.29 | starseeker | andromed`: if you're still in unit test mode, what do you think about a task to break up bntester.c in src/libbn into the one-file-per-function paradigm? |
| 20:33.03 | Notify | 02GCI:eames * 4938019295461376 Design a new website favicon! #10: Ready for review - The work on this task is ready to be reviewed. |
| 20:33.14 | andromed` | probably a good idea... bntester is pretty big, though |
| 20:33.26 | andromed` | I've never bothered to go through it well enough to get a good idea of how it works |
| 20:34.19 | Notify | 03BRL-CAD:maths22 * 63663 brlcad/trunk/CMakeLists.txt: Added CDash submission to brlcad.org/CDashTo run, execute 'ctest -D Experimental' |
| 20:34.51 | starseeker | nods - not sure if it's one task or several to deal with it |
| 20:35.40 | maths22 | ``Erik: I see you re-colored the GCI output |
| 20:37.34 | Notify | 03BRL-CAD:starseeker * 63664 (brlcad/trunk/src/libbn/CMakeLists.txt brlcad/trunk/src/libbn/tests/CMakeLists.txt): Move bntester down into the tests directory |
| 20:45.12 | Notify | 02GCI:eames * 4938019295461376 Design a new website favicon! #10: Design - I created a cube favicon. I did this because whenever I think of 3d geometry I think of a cube. I also tried to keep it... |
| 20:47.05 | ``Erik | maths22: yup. |
| 20:47.18 | maths22 | Looks good |
| 20:48.10 | ``Erik | cool, wanted to keep it differentiated from commits and not jump out too much (had it dark red at one point, bad emphasis) |
| 20:48.25 | *** join/#brlcad merzo (~merzo@102-126-132-95.pool.ukrtel.net) |
| 20:48.51 | ``Erik | maybe when buildbot and cdash are all grooving, I can hook things up so a failed test is reported via notify in bright red O.o :) |
| 20:50.46 | *** join/#brlcad andromeda_galaxy (~peter@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
| 20:53.39 | maths22 | starseeker: I really need to remember to disable that documentation stuff |
| 21:08.05 | Notify | 03BRL-CAD:n_reed * 63665 (brlcad/trunk/src/libged/draw.c brlcad/trunk/src/libged/ged_private.h): Add an evaluated shaded draw mode (draw -m3 ...) that draws the poly plots of the draw paths after temporary conversion to evaluated breps. |
| 21:08.21 | andromed` | for some reason, this year I keep thinking of things that would be trivially solved with Lisp macros and then realizing that I'm writing C... |
| 21:08.55 | starseeker | maths22: heh, yeah the docbook building process is rather long |
| 21:09.25 | maths22 | andromed`: more or less doing the same thing with haskell |
| 21:09.25 | andromed` | maths22: yeah, Haskell is great language except for not having macros |
| 21:09.40 | maths22 | andromed`: what is a lisp macro? |
| 21:09.48 | andromed` | I keep meaning to try to learn enough about TH to see if I could write some amount of metaprogramming facility in it, but never have quite enough time |
| 21:10.06 | andromed` | maths22:http://www.gigamonkeys.com/book/macros-defining-your-own.html |
| 21:10.42 | andromed` | is a pretty good introduction |
| 21:11.25 | maths22 | thank you |
| 21:11.27 | Notify | 03BRL-CAD:starseeker * 63666 (brlcad/trunk/include/CMakeLists.txt brlcad/trunk/include/bn/chull.h and 34 others): More libbn header work. |
| 21:12.00 | andromed` | I *also* keep thinking of things to ensure are correct by using the type system and then realizing I'm in C as well... oh well |
| 21:12.38 | maths22 | Is lisp strictly typed? |
| 21:12.44 | andromed` | Not really... |
| 21:13.05 | maths22 | starseeker: still getting a segfault |
| 21:13.22 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
| 21:13.40 | andromed` | I've also been planning on learning enough about type systems to make my own dependently typed strictly-typed language with macro-like metaprogramming... |
| 21:13.49 | andromed` | Unfortunately, I never seem to quite get around to it... |
| 21:14.28 | maths22 | what does the "dependently typed" part mean? |
| 21:15.28 | andromed` | Finding a really good description is hard, some of the links here aren't too bad: http://en.wikipedia.org/wiki/Dependent_type |
| 21:16.38 | Stragus | To my C and assembly mind, a type that depends on its value doesn't make any sense |
| 21:17.09 | andromed` | Stragus: it does seem quite foreign at first, but they seem to be *very* powerful |
| 21:17.35 | andromed` | I really like the idea of embodying proofs of correctness in the types... for some systems, at least, you can do that with dependent types |
| 21:17.51 | Stragus | Very powerful in what sense? Easier to work with in some cases perhaps, but probably not to generate better code |
| 21:18.01 | Notify | 02GCI:judebirch * 5504522529013760 Animate our logo! #10: I finished a bit - But it would be great to have some help - Hello, I made all the frames for the gif, but I can't a program that won't... |
| 21:19.35 | andromed` | mostly in that the primary purpose of a really good type system is to help programmers avoid mistakes by embodying extra information about what data goes around, and so a type system that allows full proofs of correctness that the compiler will complain about at compile time if there is a problem with the system is kind of the ultimate type system. |
| 21:20.34 | Stragus | Sure. As long as it's done at compilation time, I have no problem with it |
| 21:25.33 | Notify | 03BRL-CAD:starseeker * 63667 (brlcad/trunk/include/bn/clip.h brlcad/trunk/include/bn/noise.h and 4 others): Add a few headers needed by declarations. |
| 21:26.20 | andrei | Sorry to jump into the discussion regarding types |
| 21:26.28 | starseeker | ``Erik: any idea why ctest might be segfaulting on bz? |
| 21:26.40 | andrei | but my opinion is that loosley-typed languages are generally difficult to master, especially if you don t have experience |
| 21:27.10 | andrei | andromed` why isn't C what you're looking for, in terms of typing? |
| 21:27.12 | Stragus | And they are the most efficient when you know what you are doing |
| 21:27.19 | andromed` | andrei: probably true... |
| 21:27.42 | andromed` | andrei: do you know anything about type systems like Haskell's (Hindley-Milner) or Agda/Idris(different kinds of dependent typing)? |
| 21:27.59 | andrei | I know a very, very slight bit of haskell |
| 21:28.10 | andrei | but nothing into the typing aspect in special |
| 21:29.15 | andromed` | Haskell's type system, especially with some of the more common GHC extensions is quite powerful and very different from C's |
| 21:29.55 | andrei | my basic understanding is that you don t specify a type |
| 21:30.02 | andrei | but the type in inferred to your var |
| 21:30.15 | andrei | so it sorta looks loosley, but it's not |
| 21:30.47 | andromed` | It's usually considered good practice to give type declarations at least for all functions |
| 21:31.01 | andromed` | though Haskell does have a nice type inference engine |
| 21:31.21 | andrei | what do you dislike at how c typing works? |
| 21:31.25 | andromed` | the type system they have meshes really nicely with the purely functional style of progamming.... |
| 21:31.32 | andromed` | (which I happen to enjoy0 |
| 21:32.20 | andrei | I've always felt that functional programming is much more dependant on lambda calculus knowledge |
| 21:32.26 | andrei | than "computer" programming |
| 21:32.45 | andromed` | I tend to think of things that I'd like to do with multiple typeclasses or some of the other more advanced features of the type system that can't really be done easily in C |
| 21:32.52 | ``Erik | starseeker: nope, not at all... is the sig from ctest itself or a child proc? |
| 21:33.09 | Stragus | andromed`, do you have an example of something that can't be done in C? |
| 21:33.10 | ``Erik | Stragus: you know nottin', john snuh |
| 21:33.14 | andromed` | that's probably true.. I really enjoy math and analysis anyway, so I often end up over there... |
| 21:33.46 | Stragus | ``Erik, I haven't seen Lisp beat good C yet ;) |
| 21:33.52 | maths22 | ``Erik: not sure; how would I checkthat? |
| 21:34.15 | ``Erik | Stragus: because you choose to not see it O:-) |
| 21:34.20 | ``Erik | maths22: gdb? |
| 21:34.26 | maths22 | Stragus: you can do it in C, but some things would be much more painful |
| 21:34.27 | andromed` | Stragus: well, it's less of a problem in C++, but C doesn't really have anything like typeclasses |
| 21:35.05 | andrei | andromed` : the price for what you ve said about haskell is generally slow execution/interpreting ? |
| 21:35.13 | andrei | isn't* |
| 21:35.28 | starseeker | maths22: can you try running ctest directly in gdb, e.g. gdb --args ctest -I 1,3 |
| 21:35.34 | starseeker | no idea if that'll work... |
| 21:35.53 | andromed` | How fast something like Haskell can be made is quite an interesting probem |
| 21:35.56 | andromed` | *problem |
| 21:36.33 | andromed` | all the things that the compiler knows (including things like where side effects happen, and what they happen to) should mean that the compiler can do some really good optimizations |
| 21:37.11 | andrei | writing a compiler, especially one that is capable of generating/understanding complex ast logic is no easy task |
| 21:37.19 | Stragus | Compilers often know far less about the code than the programmer does, and it's a very complex problem |
| 21:37.22 | Notify | 03BRL-CAD:n_reed * 63668 (brlcad/trunk/src/tclscripts/archer/Archer.tcl brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl): Add evaluated shaded draw mode to Archer's preferences dialog and tree context menu. |
| 21:37.32 | andrei | I was looking at use-def chains in llvm some months ago |
| 21:37.36 | Stragus | Hence why low-level codes, which give the programmer more control, perform better |
| 21:38.11 | andrei | which is pretty straight forward, compiler figures dead code/unused variables and doesn't include them. And figuring this out is a lot more complex than it's effect. |
| 21:38.51 | ``Erik | Stragus: for 99% of coders, that is a false statement... for the others, 99% have different variables to optimize for :) |
| 21:39.21 | andromed` | another point of expressive typesystems and functional languages has to do with compile roptimizations... a really good compiler can do far more than that... GHC is even on the road to autoparallelizing certain computations |
| 21:39.52 | andrei | some parallelization is trivial, I wonder if there's any C compiler that does that |
| 21:39.59 | andrei | i.e imbricated for's |
| 21:40.20 | Stragus | C compilers can parallelize very simple loops with SSE/AVX, it's very limited |
| 21:40.35 | Stragus | Intrinsics really are the only way |
| 21:41.30 | andrei | I find C a very simple language in terms of functionality |
| 21:41.35 | andrei | it's a very limited language |
| 21:42.14 | Stragus | ``Erik, today's compilers can't even properly guess the probability of a branch being taken, or the iteration count of a loop. This is fundamental information to properly optimize, even basic things like register allocation |
| 21:42.27 | andromed` | I just remember having seen some research papers a while back at least showing that there are some optimizations that it's trivial to do in functional languages but much harder todo in imperative ones, that could, in a number of cases, make highly optimized Haskell with a couple of custom optimizations run very nearly as fast as hand-optimized C. |
| 21:42.38 | Stragus | Sure, you can output branch-probabilities and feed that back into the next compilation pass, and results are very disappointing somehow |
| 21:42.45 | ``Erik | C is a "portable assembler" for the pdp class of machine... it happens to be dandy for a large set of problems on a large set of isas, but it's very tied to the pdp isa |
| 21:43.52 | Stragus | A compiler can't know that if branch A is taken, then 96% of the time, branch B will also be taken. Again, this is essential information to optimize properly |
| 21:44.15 | andrei | Stragus: the branch prediction doesn't rely motly on the programmer writing likely(normal) else unlikely(error) ? |
| 21:44.20 | andrei | mostly* |
| 21:45.21 | andrei | speaking of functional optimization, I might say it the wrong way, but you get the idea |
| 21:45.23 | andrei | tail recursion |
| 21:45.47 | Stragus | andrei: Yes, it can help in some cases, every little bit of extra information to the compiler can help |
| 21:45.47 | andrei | I remember writing a factorial in Scheme and the calls would stop when it reached end |
| 21:46.02 | andrei | it wouldn't recurse back like C stack works |
| 21:46.15 | andrei | I hope you understand what I m trying to say |
| 21:46.24 | Stragus | You can also do tail recursion in C |
| 21:46.46 | ``Erik | tail call elimination is not done in any C compiler that I know of, and very few functional compilers... scheme is a bit odd in requiring it :) |
| 21:47.09 | Stragus | ``Erik, try it out ;). Make sure your recursive call is your last statement before return; |
| 21:48.35 | ``Erik | if I get time... (and dur, to be a tail call, the recursive call MUST be the last statement... that's kinda by definition) |
| 21:49.11 | starseeker | maths22: I bootstrapped CMake 3.0.2 on bz and ran make check successfully |
| 21:49.25 | andrei | Stragus: I dont see how C would do tail recursion, it needs to clear the stack ? |
| 21:49.44 | ``Erik | starseeker: is system cmake too old or not working? |
| 21:49.50 | Stragus | andrei, it just reuses the same stack space for the next call |
| 21:49.52 | starseeker | ``Erik: dunno |
| 21:50.01 | ``Erik | system is 3.0.2 |
| 21:50.10 | andrei | how? afaik you can't control the IP where your call is put |
| 21:50.13 | andrei | but I might be wrong |
| 21:50.20 | starseeker | that's the same version |
| 21:50.34 | Stragus | The compiler can figure out that it's a tail recursive function call pretty easily |
| 21:50.40 | starseeker | ``Erik: can you have ports rebuild it? |
| 21:50.40 | Stragus | This is rather trivial |
| 21:50.47 | starseeker | maybe a system lib changed or something |
| 21:51.07 | ``Erik | starseeker: I could... what's the failure? (I must've missed it) |
| 21:51.38 | ``Erik | the ctest segfault? |
| 21:52.00 | andrei | the good and bad thing with C is it was designed to solve a specific subset of problems and that's exactly what it does |
| 21:52.03 | maths22 | ``Erik: I'm the one getting it |
| 21:52.22 | maths22 | Starseeker: unless you are too |
| 21:52.27 | starseeker | not seeing it... |
| 21:52.29 | ``Erik | recompiles cmake |
| 21:52.34 | starseeker | at least, not with my build of cmake |
| 21:52.47 | starseeker | hoping a recompile will fix it, otherwise something Weird is going on |
| 21:53.00 | andrei | in any case, andromed` your knowledge is impressive, specially given your age :) |
| 21:53.08 | andromed` | andrei: thanks! |
| 21:53.33 | andromed` | andrei: also, last night you mentioned that we should test my task a little more... do you know a good way to test those functions? |
| 21:53.52 | andromed` | (though I can say that at least "t", "e", and "s" still work, since the plot output has those in it) |
| 21:54.15 | andrei | I was talking about the one with azimuth |
| 21:54.23 | andrei | I can't remember it's exact name |
| 21:54.35 | andrei | I remember just that you swapped fabs(sin(x)) with fabs(cos(x)) |
| 21:54.43 | andrei | and I wanted to see why, but I didn't get time to look into it |
| 21:54.46 | Notify | 02GCI:Melange * 6101246763073536 Create a book layout for Doc Camp Book #3: No more Work can be submitted - Melange has detected that the deadline has passed and no more work can be submitted. The... |
| 21:55.36 | andrei | I was more curious how did the error occur |
| 21:55.42 | andrei | not contesting your corectness |
| 21:55.58 | andrei | I don't think I will have time to look into until until gci finished, and as you said, since it doesn't break anything |
| 21:56.18 | ``Erik | maths22, starseeker: cmake 3.0.2 has been recompiled/reinstalled on BZ |
| 21:56.18 | andromed` | andrei: I think it's somewhat likely that someone was trying to write an optimized version of _vec_aed but made a small mistake and forgot the 1- |
| 21:56.31 | maths22 | Thanks. |
| 21:56.37 | andrei | andromed` that does make sense |
| 21:58.24 | andromed` | andrei: thanks! also, do you know how to let a libbn test read from an ``expected'' file? |
| 21:58.53 | andrei | the last time I worked on the brlcad system the testing method was different |
| 21:59.00 | andrei | I believe Daniel changed it in the meanwhile |
| 21:59.05 | andromed` | ahh... |
| 21:59.15 | andrei | but I assume cmake should have some directive |
| 21:59.27 | andrei | don't mean to sound lazy but, did you try asking them? |
| 22:00.31 | andromed` | asking who? |
| 22:00.35 | andrei | cmake guys? |
| 22:00.50 | andrei | or what do you mean with |
| 22:00.53 | andrei | read from an expected file |
| 22:00.55 | andrei | I m not sure I understand |
| 22:00.57 | andromed` | no... I'll dig through the documentation a bit more |
| 22:01.17 | andromed` | bn_axis tests (that I'm writing now) test tp_3axis, which writes its output to a file |
| 22:01.44 | starseeker | andromed`: I would suggest opening the file and reading it into memory... it's probably either that or doing a diff using CMake between two files... |
| 22:01.45 | andrei | I know that cmake can read into a variable |
| 22:01.45 | andromed` | to the idea is, right now at least, that the test spec in the CMakeLists.txt file tells the tester where a ``correct'' output is, the tester creates the actual output, and then compares them |
| 22:01.47 | andrei | like this |
| 22:01.47 | andrei | file (STRINGS "BuildNumber.txt" BUILD_NUMBER) |
| 22:02.04 | andromed` | so the tester is doing the compare, but I need to be sure that the datafile is copied to the directory containing the tester |
| 22:02.58 | andrei | that's pretty much all I know |
| 22:03.13 | starseeker | andromed`: could you just specify the control file as an input to your C test program, read it into memory, generate a file in your test and read that into memory as well, then compare? |
| 22:03.23 | andromed` | that's basically what I'm doing |
| 22:03.46 | andromed` | but for out-of-tree builds, the file either needs to be copied to the dir that the test runs in |
| 22:03.52 | andromed` | or the test needs to know the full path to the file |
| 22:03.54 | starseeker | ah |
| 22:04.04 | starseeker | there is a macro for such things... |
| 22:04.37 | andromed` | I thought there was... Just couldn't remember what it was called |
| 22:04.53 | starseeker | BRLCAD_MANAGE_FILES |
| 22:04.59 | Notify | 03BRL-CAD:n_reed * 63669 (brlcad/branches/brep-debug/CMakeLists.txt brlcad/branches/brep-debug/doc/docbook/system/man1/en/pixautosize.xml and 164 others): sync from trunk through r63668 |
| 22:05.18 | andromed` | aah, that explains it... I was looking for a CMAKE_* macro |
| 22:05.31 | starseeker | yeah, it's definitely not standard |
| 22:06.06 | starseeker | that was the result of a lot of head/wall collisions on what to do about the many data files BRL-CAD uses (tcl scripts being the most common, but there are others) |
| 22:06.21 | Notify | 02GCI:martinhesa * 6356614713966592 Design a BRL-CAD Sticker #11: Ready for review - The work on this task is ready to be reviewed. |
| 22:06.47 | andromed` | ah... Now I just have to try to find the documentation for it... |
| 22:07.20 | starseeker | misc/CMake/BRLCAD_Targets.cmake |
| 22:07.22 | starseeker | it's in there |
| 22:07.58 | andromed` | I just found it, thanks! |
| 22:08.47 | starseeker | regards that macro as an example of one of Tim Daly's favorite sayings about programming - "There's no such thing as a simple job." |
| 22:09.12 | andromed` | it doesn't *seem* like that should be so difficult... oh well |
| 22:09.28 | starseeker | it's complicated by Windows, where the symlinking trick won't work |
| 22:09.34 | andromed` | ahh... |
| 22:09.57 | starseeker | plus multiple configuration builds (Visual Studio and XCode) need more than one copy in their build dirs |
| 22:10.04 | andrei | goodnight, folks ! :) |
| 22:10.26 | starseeker | didn't think it would be hard either :-/ |
| 22:10.34 | starseeker | O.o |
| 22:10.41 | andromed` | oh well. |
| 22:10.49 | starseeker | maths22: I can reproduce the segfault with the system installed ctest |
| 22:11.08 | starseeker | the same thing worked when I used a locally bootstrapped version of CMake |
| 22:11.34 | starseeker | try grabbing the src tarball http://www.cmake.org/files/v3.0/cmake-3.0.2.tar.gz and do the ./bootstrap && gmake build |
| 22:11.56 | starseeker | that'll build a ctest and cmake in the bin/ subdirectory - put that dir in your PATH and try again |
| 22:12.00 | starseeker | that's what worked for me |
| 22:14.13 | starseeker | ``Erik: not sure what it's doing - ctest -I 7,7 crashes on strcmp in libc, but there's no debugging symbols - the call stack above strcmp looks like libcrypto and libssl |
| 22:14.49 | starseeker | wonder if ports is turning on features the bootstrap leaves off |
| 22:20.05 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) |
| 22:40.29 | ``Erik | starseeker: only feature is "build docs" :/ |
| 22:42.30 | Notify | 02GCI:winghouchan * 5561255020462080 Design a new website landing page for BRL-CAD #4: Ready for review - The work on this task is ready to be reviewed. |
| 23:04.06 | *** join/#brlcad winghouchan (~winghouch@90.209.142.248) |
| 23:04.15 | winghouchan | j |
| 23:04.32 | winghouchan | Work is ready to be reviewed :D |
| 23:05.42 | winghouchan | I'm off for the night. Feel free to take a look of the new landing site design via https://github.com/winghouchan/BRL-CAD-GCI/ |
| 23:05.48 | winghouchan | G'night |
| 23:08.43 | Notify | 02GCI:winghouchan * 5561255020462080 Design a new website landing page for BRL-CAD #4: Notice - I haven't been able to find any of the images I'm looking for so at the moment all of the section... |
| 23:09.18 | Notify | 02GCI:winghouchan * 5561255020462080 Design a new website landing page for BRL-CAD #4: Write-Up - Forgot to do the write-up but will complete it tomorrow as I'm off for the night. |
| 23:26.49 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) |
