00:03.59 | Notify | 03GCI:Melange * 5213338241859584 Fix at least 8 spelling mistakes in at least 8 different files: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
00:12.10 | Notify | 03GCI:o7p9bxbnyj * 5048599469621248 Implement bu_scan_fastf_t() function to scan floating point values from strings: Ready for review - The work on this task is ready to be reviewed. |
00:15.59 | Notify | 03GCI:maths22_m * 5173865613361152 Design a web page that overviews the BRL-CAD contributors: Task Assigned - This task has been assigned to Olivia Orrell-Jones. You have 100 hours to complete this... |
00:20.13 | *** join/#brlcad thespartapika (~Josie@pool-173-79-231-107.washdc.fios.verizon.net) |
00:26.52 | *** join/#brlcad andromeda-galaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
00:31.14 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
00:53.12 | *** join/#brlcad andromeda_galaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
01:16.36 | Notify | 03GCI:uhmyoyo * 5987394427813888 Design a BRL-CAD splash screen #10: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
01:28.33 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) |
01:31.30 | Notify | 03GCI:jatintaneja17 * 6356815033925632 Design a BRL-CAD Sticker #9: Task Claimed - I would like to work on this task. |
01:56.08 | Notify | 03GCI:kalradaksh * 4949239830413312 Transcribe Geometry Model Data from a PDF report to an ASCII file Helicopter: Claim Removed - The claim on this task has been removed, someone else can claim it... |
02:26.16 | Notify | 03GCI:skyguy * 5231299258220544 Model a toy tank in 3D using BRL-CAD: Task Claimed - I would like to work on this task. |
02:44.41 | Notify | 03GCI:eames * 6399086370488320 Design a BRL-CAD Sticker #2: Ready for review - The work on this task is ready to be reviewed. |
02:47.06 | Notify | 03GCI:ankitmukherjee * 6359310477033472 Design a banner for our Facebook page (and/or other social media sites) #3: Designs Submitted - I submitted the banners and I can mock it up on a Facebook... |
02:57.35 | *** join/#brlcad Techtronix (75c8505a@gateway/web/freenode/ip.117.200.80.90) |
02:59.14 | Notify | 03GCI:ankitmukherjee * 6359310477033472 Design a banner for our Facebook page (and/or other social media sites) #3: Ready for review - The work on this task is ready to be reviewed. |
03:08.26 | Notify | 03GCI:Melange * 5670223239708672 Design a BRL-CAD splash screen #7: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
03:21.50 | Notify | 03GCI:hendrias * 4956557716488192 Fix at least 8 spelling mistakes in at least 8 different files #5: Task Claimed - I would like to work on this task. |
03:22.40 | Notify | 03GCI:hendrias * 4956557716488192 Fix at least 8 spelling mistakes in at least 8 different files #5: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
03:23.15 | Notify | 03GCI:googgeek101 * 4544323332866048 Design a T-Shirt for BRL-CAD #6: Task Claimed - I would like to work on this task. |
03:24.15 | Notify | 03GCI:Melange * 6399086370488320 Design a BRL-CAD Sticker #2: No more Work can be submitted - Melange has detected that the deadline has passed and no more work can be submitted. The submitted work... |
03:31.02 | Notify | 03GCI:mandeep * 6356815033925632 Design a BRL-CAD Sticker #9: Task Assigned - This task has been assigned to Jatin Taneja. You have 100 hours to complete this task, good luck! |
03:31.03 | Notify | 03GCI:mandeep * 5231299258220544 Model a toy tank in 3D using BRL-CAD: Task Assigned - This task has been assigned to Skyguy. You have 100 hours to complete this task, good luck! |
03:31.07 | Notify | 03GCI:mandeep * 4544323332866048 Design a T-Shirt for BRL-CAD #6: Task Assigned - This task has been assigned to GoogleGeek. You have 100 hours to complete this task, good luck! |
03:41.19 | Notify | 03GCI:googgeek101 * 4544323332866048 Design a T-Shirt for BRL-CAD #6: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
03:47.30 | Notify | 03GCI:mandeep * 5254428328198144 Design a website icon set for brlcad.org #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this... |
03:47.45 | Notify | 03GCI:mandeep * 5254428328198144 Design a website icon set for brlcad.org #3: None - You are making great efforts, but still it needs improvement. Increase the smoothness of strokes. Colors look... |
03:49.35 | *** join/#brlcad andromeda-galaxy (~user@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
04:01.54 | Notify | 03GCI:mandeep * 4531831353376768 Design a T-Shirt for BRL-CAD #8: None - Hey Aiden, In this design, "BRL-CAD" text goes out of the box and logo needs smoothness. You can make a better design then... |
04:01.59 | Notify | 03GCI:mandeep * 4531831353376768 Design a T-Shirt for BRL-CAD #8: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
04:07.05 | Notify | 03GCI:rohit_agarwal * 5781103189164032 Create a BRL-CAD presentation template #8: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
04:07.46 | Notify | 03GCI:rohit_agarwal * 4544323332866048 Design a T-Shirt for BRL-CAD #6: Task Claimed - I would like to work on this task. |
04:16.56 | andromeda-galaxy | for the fortran->c tasks, does anyone mind of the C code uses LIBBN and fastf_t for the datatypes? |
04:18.23 | Stragus | I'm not a mentor but they would probably prefer if the new C code follows existing conventions, such as using libbn and fastf_t data types |
04:18.52 | andromeda-galaxy | Stragus: I was just wondering because the github project currently doesn't depend on any of the brl-cad libraries |
04:19.27 | *** join/#brlcad wltan (~wltan@101.127.134.59) |
04:19.56 | andromeda-galaxy | Well, hopefully using libbn will be alright... I need the vector/matrix functions |
04:20.36 | Stragus | In the worst case, that sounds like very little code to import/copy if they decide it necessary |
04:20.44 | Notify | 03GCI:wltan * 6127620076863488 Compile BRL-CAD using Microsoft Visual Studio Express 2013: Ready for review - The work on this task is ready to be reviewed. |
04:23.59 | Notify | 03GCI:mandeep * 6359310477033472 Design a banner for our Facebook page (and/or other social media sites) #3: Simply Perfect - Your pretty simple approach works great. Can submit banner with... |
04:24.09 | Notify | 03GCI:mandeep * 6359310477033472 Design a banner for our Facebook page (and/or other social media sites) #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to... |
04:26.06 | andromeda-galaxy | Stragus: true... I'll start by using fastf_t &c, changing shouldn't be too hard. thanks! |
04:27.02 | andromeda-galaxy | Stragus: also, on the code style side of things, for functions declarations with multi-line argument lists, do you know if it is alright to put multiple on the same line for grouping? |
04:27.21 | andromeda-galaxy | e.g. fun1(fastf_t a, fastf_t b \n fastf_t c, fastf_t d); |
04:28.25 | Stragus | I believe BRL-CAD allows different conventions as long as it's consistent, it's probably best to make the convention identical to other codes related to the one you'll be writing |
04:28.46 | andromeda-galaxy | hmm... Okay, thanks! |
04:32.51 | Notify | 03GCI:mandeep * 6399086370488320 Design a BRL-CAD Sticker #2: None - This is simple and really looks great. Good work Eames. |
04:32.56 | Notify | 03GCI:mandeep * 6399086370488320 Design a BRL-CAD Sticker #2: Task Closed - Congratulations, this task has been completed successfully. |
04:33.31 | Notify | 03GCI:mandeep * 4544323332866048 Design a T-Shirt for BRL-CAD #6: Task Assigned - This task has been assigned to Rohit Agarwal. You have 100 hours to complete this task, good luck! |
05:02.26 | andromeda-galaxy | any idea how I can get cmake in the naca project's build system to link to brl-cads libbn? |
05:04.30 | *** join/#brlcad andromeda_galaxy (~andromeda@108-225-17-54.lightspeed.sntcca.sbcglobal.net) |
05:06.20 | Notify | 03GCI:gjeet * 6359310477033472 Design a banner for our Facebook page (and/or other social media sites) #3 http://www.google-melange.com/gci/task/view/google/gci2014/6359310477033472: Re: Logo ... |
05:09.41 | Notify | 03GCI:adityagulati * 5797874164039680 Create a book layout for Doc Camp Book #2: Problem - Sir, I cant upload a jpeg file. since the file size is to high it can't be saved and If I convert it to... |
05:12.37 | *** join/#brlcad gjeet (75c76e79@gateway/web/cgi-irc/kiwiirc.com/ip.117.199.110.121) |
05:17.44 | Notify | 03GCI:Melange * 6648047639461888 Design a BRL-CAD Sticker #10: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
05:18.34 | Notify | 03GCI:adityagulati * 5797874164039680 Create a book layout for Doc Camp Book #2: Ready for review - The work on this task is ready to be reviewed. |
05:22.40 | Notify | 03GCI:devj * 5765799415382016 Create a BRL-CAD presentation template: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
05:25.29 | Notify | 03GCI:devj * 6068206720516096 Design a BRL-CAD business card #2: Task Claimed - I would like to work on this task. |
05:26.09 | Notify | 03GCI:gjeet * 6068206720516096 Design a BRL-CAD business card #2: Task Assigned - This task has been assigned to Jake Rullman. You have 100 hours to complete this task, good luck! |
05:27.49 | Notify | 03GCI:kalradaksh * 4949239830413312 Transcribe Geometry Model Data from a PDF report to an ASCII file Helicopter: Task Claimed - I would like to work on this task. |
05:28.44 | Notify | 03GCI:Melange * 6353662997692416 Design a BRL-CAD splash screen #3: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
05:28.54 | Notify | 03GCI:gjeet * 4949239830413312 Transcribe Geometry Model Data from a PDF report to an ASCII file Helicopter: Task Assigned - This task has been assigned to Daksh kalra. You have 100 hours to... |
05:31.05 | Notify | 03GCI:Melange * 4931863265148928 Transcribe Geometry Model Data from a PDF report to an ASCII file: No more Work can be submitted - Melange has detected that the deadline has passed and no more work... |
05:33.35 | Notify | 03GCI:kalradaksh * 4949239830413312 Transcribe Geometry Model Data from a PDF report to an ASCII file Helicopter: Claim Removed - The claim on this task has been removed, someone else can claim it... |
05:35.31 | Notify | 03GCI:kalradaksh * 5765799415382016 Create a BRL-CAD presentation template: Task Claimed - I would like to work on this task. |
05:36.36 | Notify | 03GCI:parthmiglani_21 * 4936325870387200 Design a website icon set for brlcad.org: Task Claimed - I would like to work on this task. |
05:39.01 | Notify | 03GCI:manastaneja * 5781103189164032 Create a BRL-CAD presentation template #8: Task Claimed - I would like to work on this task. |
05:39.52 | Notify | 03GCI:pulkit10mehta * 6648047639461888 Design a BRL-CAD Sticker #10: Task Claimed - I would like to work on this task. |
05:40.22 | Notify | 03GCI:Melange * 6178630262587392 Design a banner for our Facebook page (and/or other social media sites) #6: Task Reopened - Melange has detected that the final deadline has passed and it has... |
05:40.48 | Notify | 03GCI:manastaneja * 5781103189164032 Create a BRL-CAD presentation template #8: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
05:42.43 | Notify | 03GCI:manastaneja * 6690570030284800 Design a T-Shirt for BRL-CAD: Task Claimed - I would like to work on this task. |
05:45.19 | Notify | 03GCI:vidushi * 5987394427813888 Design a BRL-CAD splash screen #10: Task Claimed - I would like to work on this task. |
05:45.20 | Notify | 03GCI:mandeep * 5765799415382016 Create a BRL-CAD presentation template: Task Assigned - This task has been assigned to Daksh kalra. You have 100 hours to complete this task, good luck! |
05:45.29 | Notify | 03GCI:mandeep * 6648047639461888 Design a BRL-CAD Sticker #10: Task Assigned - This task has been assigned to Pulkit Mehta. You have 100 hours to complete this task, good luck! |
05:45.34 | Notify | 03GCI:mandeep * 4936325870387200 Design a website icon set for brlcad.org: Task Assigned - This task has been assigned to Parth Miglani. You have 100 hours to complete this task, good luck! |
05:45.35 | Notify | 03GCI:mandeep * 6690570030284800 Design a T-Shirt for BRL-CAD: Task Assigned - This task has been assigned to manas taneja. You have 100 hours to complete this task, good luck! |
05:46.29 | Notify | 03GCI:Melange * 5853389636239360 Design a BRL-CAD Sticker #3: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
05:46.54 | Notify | 03GCI:mandeep * 5987394427813888 Design a BRL-CAD splash screen #10: Task Assigned - This task has been assigned to vidushi. You have 96 hours to complete this task, good luck! |
05:47.04 | Notify | 03GCI:vidushi * 5987394427813888 Design a BRL-CAD splash screen #10: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
05:47.14 | Notify | 03GCI:vidushi * 5853389636239360 Design a BRL-CAD Sticker #3: Task Claimed - I would like to work on this task. |
05:49.24 | Notify | 03GCI:mandeep * 5853389636239360 Design a BRL-CAD Sticker #3: Task Assigned - This task has been assigned to vidushi. You have 100 hours to complete this task, good luck! |
05:53.00 | Notify | 03GCI:jatish * 6178630262587392 Design a banner for our Facebook page (and/or other social media sites) #6: Task Claimed - I would like to work on this task. |
05:58.46 | *** join/#brlcad YashM (~YashM@117.223.172.233) |
06:03.22 | Notify | 03GCI:mandeep * 6178630262587392 Design a banner for our Facebook page (and/or other social media sites) #6: Task Assigned - This task has been assigned to jatish. You have 100 hours to complete... |
06:13.19 | Notify | 03GCI:sharan1998 * 5821990405406720 Model a toy tank in 3D using BRL-CAD #4: Task Claimed - I would like to work on this task. |
06:16.45 | Notify | 03GCI:ishwerdas * 4954452779859968 Design a web page that overviews the BRL-CAD contributors #5 http://www.google-melange.com/gci/task/view/google/gci2014/4954452779859968: Output Format Hey... |
06:18.57 | *** join/#brlcad ishwerdas (75c76e79@gateway/web/cgi-irc/kiwiirc.com/ip.117.199.110.121) |
06:21.27 | Notify | 03GCI:mandeep * 5821990405406720 Model a toy tank in 3D using BRL-CAD #4: Task Assigned - This task has been assigned to Sharan Narayan. You have 100 hours to complete this task, good luck! |
06:29.06 | *** join/#brlcad YashM_ (~YashM@117.198.13.10) |
06:31.01 | *** join/#brlcad milamber (~devli_000@104-9-73-54.lightspeed.cicril.sbcglobal.net) |
06:40.22 | Notify | 03GCI:sharan1998 * 5821990405406720 Model a toy tank in 3D using BRL-CAD #4: Questions - Does it need to have movable wheels?like if we print it out in 3D? Or should it have belt wheel mechanism? |
06:41.32 | Notify | 03GCI:ankitmukherjee * 6359310477033472 Design a banner for our Facebook page (and/or other social media sites) #3: Thanks - That helps a lot. I was having a hard time working with the smaller PNG... |
06:42.32 | Notify | 03GCI:ankitmukherjee * 6359310477033472 Design a banner for our Facebook page (and/or other social media sites) #3: No Problem - Glad you liked the design! I'll try to submit the edited versions... |
06:57.21 | Notify | 03GCI:hunarmalik * 5309919842533376 Design a website icon set for brlcad.org #2: query - Sir how many icons should be there? |
06:58.45 | *** join/#brlcad MarcTannous (bc1a92f6@gateway/web/freenode/ip.188.26.146.246) |
06:59.29 | MarcTannous | how do I "refresh" the local copy of brl-cad's repository without having to build all over again? |
06:59.48 | MarcTannous | I mean, make it ignore all the changes I've made and just give me the files of a stable version |
07:00.07 | ignacio | okey.. 05:00AM here.. good night guys ! |
07:00.33 | MarcTannous | night ignacio |
07:00.47 | Notify | 03GCI:ishwerdas * 5309919842533376 Design a website icon set for brlcad.org #2: None - There should be at-least following icons home about wiki gallery blog download contact login logout ... |
07:01.42 | MarcTannous | ishwerdas: is it okay if I abandon a task until someone answers my questions, solve another one and then claim it back again? |
07:03.15 | ishwerdas | Do you have any questions unanswered ? |
07:03.30 | MarcTannous | http://www.google-melange.com/gci/task/view/google/gci2014/5028787255246848# |
07:03.31 | gcibot | Eliminate any library global variable #5 |
07:03.31 | gcibot | Status: NeedsWork (3 days, 16 hours left) |
07:03.31 | gcibot | Mentor(s): Hardeep Singh Rai, Ch3ck |
07:03.51 | MarcTannous | I do not know how to get my local repo to the stable version found on sourceforge |
07:03.55 | ishwerdas | When your questions get unanswered, just ping us here. |
07:04.31 | MarcTannous | I've made quite a few changes, but they were not all okay. How should I go about getting my repo back to where it was? |
07:05.36 | ishwerdas | http://stackoverflow.com/questions/6204572/is-there-a-subversion-command-to-reset-the-working-copy |
07:06.27 | MarcTannous | damn, this will take a while |
07:07.17 | MarcTannous | let me remove my claim on this task until I have a stable repo to work on and work on another task in the meantime |
07:07.38 | Notify | 03GCI:tannousmarc * 5028787255246848 Eliminate any library global variable #5: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
07:08.18 | Notify | 03GCI:tannousmarc * 5907391937773568 Design scale/rotate/translate/shear icons: Task Claimed - I would like to work on this task. |
07:08.20 | YashM_ | ishwerdas, how do isee the contents of a .lib file |
07:09.55 | MarcTannous | yashm_, http://stackoverflow.com/questions/305287/how-to-see-the-contents-of-windows-library-lib |
07:19.41 | Notify | 03GCI:mandeep * 5797874164039680 Create a book layout for Doc Camp Book #2: Need improvements - Aditya, you are doing good work and you can do better. The design you have created is not up to the... |
07:19.51 | Notify | 03GCI:mandeep * 5797874164039680 Create a book layout for Doc Camp Book #2: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this... |
07:23.15 | MarcTannous | mandeep: can you please assign me the task I claimed? |
07:25.01 | ishwerdas | YashM_ did you try googling it ? http://bit.ly/1yVCq8y |
07:25.42 | MarcTannous | ishwerdas, oh my god that website is brilliant |
07:26.12 | ishwerdas | winks ;) |
07:26.26 | Stragus | Ahaha, I love it! |
07:26.30 | MarcTannous | ishwerdas : http://www.google-melange.com/gci/task/view/google/gci2014/5907391937773568 plox |
07:26.30 | gcibot | Design scale/rotate/translate/shear icons |
07:26.30 | gcibot | Status: ClaimRequested |
07:26.30 | gcibot | Mentor(s): Kesha Shah, Hardeep Singh Rai |
07:26.33 | Stragus | That is great |
07:26.54 | YashM_ | lol i did |
07:27.10 | YashM_ | love how you used bitly |
07:28.13 | Notify | 03GCI:ishwerdas * 5907391937773568 Design scale/rotate/translate/shear icons: Task Assigned - This task has been assigned to Marc Tannous. You have 100 hours to complete this task, good luck! |
07:28.14 | Notify | 03GCI:mandeep * 5907391937773568 Design scale/rotate/translate/shear icons: Task Assigned - This task has been assigned to Marc Tannous. You have 100 hours to complete this task, good luck! |
07:28.30 | YashM_ | :o |
07:28.52 | MarcTannous | did I just get my task assigned by two people? |
07:28.54 | ishwerdas | mandeep : perfect timing :D |
07:29.06 | ishwerdas | yeah, lucky you! MarcTannous |
07:29.09 | MarcTannous | haha |
07:29.19 | MarcTannous | I am now forced to deliver great results, two people watching over me |
07:29.38 | ishwerdas | hmm, expecting that from you ;) |
07:33.48 | Notify | 03GCI:shashank1245 * 6101246763073536 Create a book layout for Doc Camp Book #3: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
07:43.05 | MarcTannous | ishwerdas: could you provide a picture or a small video of how "shear" works? |
07:43.17 | MarcTannous | english not my first language, closest google offered me was |
07:43.22 | MarcTannous | http://www.cs.colorado.edu/~mcbryan/5229.03/mail/55.htm |
07:43.25 | MarcTannous | not sure if this is correct |
07:44.48 | Stragus | That looks correct |
07:45.21 | Stragus | Take the quad, pull right on the top part, pull left on the bottom part |
07:45.26 | MarcTannous | that is in 2D |
07:45.31 | MarcTannous | it works the same in 3D? |
07:46.20 | ishwerdas | http://demonstrations.wolfram.com/Understanding3DShearing/ |
07:46.40 | MarcTannous | ty |
07:47.09 | ishwerdas | yes it works almost the same, just that now you can also include z coods in your transformation matrix |
07:59.12 | *** join/#brlcad YashM (~YashM@117.198.9.115) |
08:02.12 | MarcTannous | bam |
08:02.19 | Notify | 03GCI:tannousmarc * 5907391937773568 Design scale/rotate/translate/shear icons: Ready for review - The work on this task is ready to be reviewed. |
08:02.20 | MarcTannous | there we go |
08:03.26 | MarcTannous | ishwerdas, mandeep waiting for the double evaluation :D |
08:07.53 | Notify | 03GCI:ekansh_mahendru * 5833974572122112 Design a BRL-CAD Sticker #15: Font Name - The name of the font is 'AR Destine'. |
08:12.46 | Notify | 03GCI:ekansh_mahendru * 5833974572122112 Design a BRL-CAD Sticker #15: Ready for review - The work on this task is ready to be reviewed. |
08:14.42 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
08:29.30 | Notify | 03GCI:jatish * 6178630262587392 Design a banner for our Facebook page (and/or other social media sites) #6: Ready for review - The work on this task is ready to be reviewed. |
08:40.21 | Notify | 03GCI:bhargavmajety * 4632172593938432 Write a wiki page on joining the BRL-CAD project: Task Claimed - I would like to work on this task. |
08:42.53 | Notify | 03GCI:helix * 5237391803547648 Create a BRL-CAD style guide / cheat sheet #5: Ready for review - The work on this task is ready to be reviewed. |
08:45.08 | *** join/#brlcad ishwerdas (75c76e79@gateway/web/cgi-irc/kiwiirc.com/ip.117.199.110.121) |
08:45.58 | MarcTannous | ishwerdas: please, if you have 5 minutes, review my task |
08:46.21 | ishwerdas | sure |
08:46.59 | MarcTannous | hope you like the icons :P |
08:47.47 | ishwerdas | I do |
08:48.08 | ishwerdas | they are simple, flat and descriptive |
08:48.27 | MarcTannous | :D |
08:48.40 | MarcTannous | will take more icons if they are introduced |
08:49.08 | MarcTannous | icon tasks* |
08:51.10 | Notify | 03GCI:ishwerdas * 5907391937773568 Design scale/rotate/translate/shear icons: Nice work! - I liked these icons, they are simple, flat and descriptive. Just one thing, if the icon for scale could... |
08:51.19 | Notify | 03GCI:ishwerdas * 5907391937773568 Design scale/rotate/translate/shear icons: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this... |
08:52.08 | MarcTannous | ishwerdas: is it okay if I just re-upload the improved version of scale icon? |
08:52.17 | MarcTannous | instead of creating a new mock-up with it? |
08:52.20 | ishwerdas | yeah |
08:53.04 | ishwerdas | but do share exported files like .png , .jpg along with your psd. |
08:53.28 | MarcTannous | oh okay |
08:55.20 | MarcTannous | there we go |
08:55.43 | Notify | 03GCI:tannousmarc * 5907391937773568 Design scale/rotate/translate/shear icons: Ready for review - The work on this task is ready to be reviewed. |
08:55.57 | MarcTannous | ishwerdas: mind checking again? :D |
08:56.59 | ishwerdas | good job! |
08:57.08 | Notify | 03GCI:ishwerdas * 5907391937773568 Design scale/rotate/translate/shear icons: Task Closed - Congratulations, this task has been completed successfully. |
08:57.20 | ishwerdas | so you are into UI design, eh ? |
08:58.01 | YashM | ishwerdas check my task too |
09:00.05 | MarcTannous | ishwerdas, any type of design :D UI design is really really nice though |
09:01.59 | ishwerdas | YashM It is already being reviewed by gjeet ;) I can see it opened up on his screen ;) |
09:02.13 | YashM | How? |
09:02.26 | ishwerdas | gjeet happens to be my brother and roommate :P |
09:02.31 | YashM | :O |
09:02.39 | YashM | Where do you live |
09:02.56 | ishwerdas | Samrala, punjab. |
09:03.24 | YashM | I live in Chhattisgarh :P |
09:03.50 | ishwerdas | Nice place :) |
09:04.07 | Notify | 03GCI:tannousmarc * 6075139737255936 Design a web page that overviews the BRL-CAD contributors #4: Task Claimed - I would like to work on this task. |
09:04.15 | MarcTannous | oh my god I found another website design task |
09:04.17 | MarcTannous | <3 |
09:04.37 | Notify | 03GCI:gjeet * 6075139737255936 Design a web page that overviews the BRL-CAD contributors #4: Task Assigned - This task has been assigned to Marc Tannous. You have 100 hours to complete this task,... |
09:04.48 | Notify | 03GCI:ishwerdas * 4632172593938432 Write a wiki page on joining the BRL-CAD project: Task Assigned - This task has been assigned to bhargav. You have 100 hours to complete this task, good luck! |
09:09.48 | Notify | 03GCI:gjeet * 5237391803547648 Create a BRL-CAD style guide / cheat sheet #5: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this... |
09:13.00 | YashM | gjeet, what do you need fixed? |
09:14.35 | MarcTannous | by the way guys, check Brackets |
09:14.43 | YashM | ishwerdas, can you please ask him |
09:15.01 | MarcTannous | Brackets is just so so good, once it gets some really nice plugins it will rock |
09:16.21 | ishwerdas | YashM be patient :) you will come to know :) |
09:16.54 | YashM | Okay, I couldn't find a comment so I don't know what to fix |
09:17.04 | ishwerdas | comment must be on the way :) |
09:17.41 | Notify | 03GCI:gjeet * 5237391803547648 Create a BRL-CAD style guide / cheat sheet #5: Nice Design - Hey yash, you are going good, just some few things I could suggest to make it better. Try having a light... |
09:17.42 | Notify | 03GCI:programmingluko * 5254428328198144 Design a website icon set for brlcad.org #3: Ready for review - The work on this task is ready to be reviewed. |
09:18.47 | Notify | 03GCI:gjeet * 6178630262587392 Design a banner for our Facebook page (and/or other social media sites) #6: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to... |
09:22.08 | Notify | 03GCI:maitreyav * 5670223239708672 Design a BRL-CAD splash screen #7: Task Claimed - I would like to work on this task. |
09:28.14 | Notify | 03GCI:rohit_agarwal * 4544323332866048 Design a T-Shirt for BRL-CAD #6: Ready for review - The work on this task is ready to be reviewed. |
09:28.55 | Notify | 03GCI:gjeet * 6178630262587392 Design a banner for our Facebook page (and/or other social media sites) #6 http://www.google-melange.com/gci/task/view/google/gci2014/6178630262587392: Hey jatish ... |
09:30.31 | Notify | 03GCI:rohit_agarwal * 4544323332866048 Design a T-Shirt for BRL-CAD #6: None - My design is ready. I have uploaded two files : Tshirt 1.png and Tshirt 1.xcf |
09:35.41 | *** join/#brlcad blessing (~blessing@41.205.22.3) |
09:37.54 | Notify | 03GCI:rossberg * 5670223239708672 Design a BRL-CAD splash screen #7: Task Assigned - This task has been assigned to Maitreya Vyas. You have 100 hours to complete this task, good luck! |
09:38.40 | YashM | guys check out ShareX, its an awesome file and image uploading FOSS |
09:46.15 | Notify | 03GCI:helix * 5237391803547648 Create a BRL-CAD style guide / cheat sheet #5: Ready for review - The work on this task is ready to be reviewed. |
09:46.53 | MarcTannous | I'm really thinking about trying a new framework for my web design task, haven't tried foundation yet |
09:47.48 | Notify | 03GCI:adityagulati * 5797874164039680 Create a book layout for Doc Camp Book #2: Ready for review - The work on this task is ready to be reviewed. |
09:48.33 | MarcTannous | oh my god I have the best idea for a contributors page |
09:50.43 | Notify | 03GCI:bhargavmajety * 4632172593938432 Write a wiki page on joining the BRL-CAD project: None - thanks Ishwerdas. I just want to know whether i need to give a brief introduction or lengthy... |
09:50.49 | Notify | 03GCI:adityagulati * 5797874164039680 Create a book layout for Doc Camp Book #2: New Files - Sir, I have Uploaded The Files and made the changes that you told. The Cover Of the Book Is Not In The... |
10:49.17 | *** join/#brlcad wltan (~wltan@116.87.62.130) |
10:49.21 | Notify | 03GCI:tannousmarc * 6075139737255936 Design a web page that overviews the BRL-CAD contributors #4: Why not a list? - Every example you gave consisted of lists of people, seemed very bland to my... |
10:49.28 | Notify | 03GCI:tannousmarc * 6075139737255936 Design a web page that overviews the BRL-CAD contributors #4: Ready for review - The work on this task is ready to be reviewed. |
10:52.44 | YashM | any mentor can check my task? |
10:54.10 | MarcTannous | don't think there's anyone here Yash |
10:54.15 | MarcTannous | it's 6 AM their timezone |
10:54.39 | YashM | its 4:30 pm in india |
10:54.43 | YashM | and there are indian mentors |
10:54.44 | MarcTannous | 6 AM us I think |
10:54.50 | MarcTannous | and 12:54 Romania |
10:55.03 | MarcTannous | is hungry |
10:56.58 | YashM | many people just did 1 task and finished |
11:00.00 | Notify | 03GCI:Melange * 5080466516344832 Create a VOL wiki page: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
11:05.02 | Notify | 03GCI:michalp2213 * 5283195146731520 Identify and eliminate dead code (100+ lines) #3: Task Claimed - I would like to work on this task. |
11:53.07 | Notify | 03GCI:joshd97 * 5625032667561984 Design a new website landing page for BRL-CAD #8: Task Claimed - I would like to work on this task. |
11:59.42 | MarcTannous | andromeda-galaxy: did you manage to remove one of the globablly initialized values yet? |
12:12.04 | Notify | 03GCI:Melange * 5249781911781376 Identify and eliminate dead code (100+ lines) #4: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
12:28.32 | Notify | 03GCI:arnav * 5001497033048064 Transcribe Geometry Model Data from a PDF report to an ASCII file Helicopter #2: Task Claimed - I would like to work on this task. |
12:48.22 | Notify | 03GCI:ch3ck * 5001497033048064 Transcribe Geometry Model Data from a PDF report to an ASCII file Helicopter #2: Task Assigned - This task has been assigned to Arnav. You have 100 hours to complete... |
12:50.23 | Notify | 03GCI:derekarani * 4956557716488192 Fix at least 8 spelling mistakes in at least 8 different files #5: Task Claimed - I would like to work on this task. |
12:54.48 | ignacio | Good morning all! :) |
12:55.04 | Notify | 03GCI:urbangoblin * 5564670123442176 Fix at least 8 spelling mistakes in at least 8 different files #3: Task Claimed - I would like to work on this task. |
12:57.03 | YashM | morning |
12:57.13 | MarcTannous | ignacio |
12:57.33 | MarcTannous | let me ask you this via PM, not realted to brl-cad |
13:00.26 | Notify | 03GCI:deepakkumarsharma * 5625032667561984 Design a new website landing page for BRL-CAD #8: Task Assigned - This task has been assigned to Ft. You have 100 hours to complete this task, good luck! |
13:00.46 | Notify | 03GCI:deepakkumarsharma * 5564670123442176 Fix at least 8 spelling mistakes in at least 8 different files #3: Task Assigned - This task has been assigned to UrbanGoblin. You have 100 hours to... |
13:01.07 | MarcTannous | deepakkumarsharma: can you please check my task? |
13:01.11 | Notify | 03GCI:deepakkumarsharma * 4956557716488192 Fix at least 8 spelling mistakes in at least 8 different files #5: Task Assigned - This task has been assigned to derekarani. You have 100 hours to... |
13:01.26 | Notify | 03GCI:deepakkumarsharma * 5283195146731520 Identify and eliminate dead code (100+ lines) #3: Task Assigned - This task has been assigned to michalp2213. You have 100 hours to complete this task,... |
13:01.46 | ignacio | MarcTannous, I only get json files from Google Melange |
13:01.58 | MarcTannous | how? |
13:02.03 | ignacio | MarcTannous, https://github.com/svineet/GCILeaderboard/blob/master/main.py#L7 |
13:02.47 | *** join/#brlcad deepak (~chatzilla@117.199.108.69) |
13:03.16 | ignacio | MarcTannous, you made that last year right? http://people.sugarlabs.org/ignacio/Wallpapers/Wallpaper.jpg |
13:03.20 | MarcTannous | yashm: brlcad-svn-trunk>src>libbn>tests |
13:03.31 | MarcTannous | ignacio: yep :D |
13:03.36 | MarcTannous | ignacio: glad you remember |
13:04.03 | ignacio | :) |
13:04.28 | MarcTannous | ignacio: I remember you having some list of people and their number of tasks, though, but not in this current version |
13:04.40 | MarcTannous | yashm: let me open up my VM and check out the correct path, just a second |
13:04.53 | YashM | its the correct path |
13:04.59 | YashM | i am doing something wrong |
13:05.07 | MarcTannous | there should be a tests folder if I'm not mistaken |
13:05.20 | ignacio | MarcTannous, this is the list I think http://kuckuck.treehouse.su:5001/org/brlcad/ |
13:05.27 | ignacio | and your profile http://kuckuck.treehouse.su:5001/student/Marc%20Tannous-count%3D9-org%3Dbrlcad |
13:05.42 | MarcTannous | ignacio: yes, but your list last year was not designed like that. It was just black text on white background |
13:06.21 | MarcTannous | if I recall correctly |
13:06.29 | MarcTannous | and was counting each user's total task, sorting it descending |
13:06.34 | MarcTannous | total task number * |
13:07.47 | MarcTannous | yashm: what library are you searching for? |
13:08.36 | MarcTannous | yashm: the unit tests in LIBBN are found under |
13:08.45 | MarcTannous | yashm: /home/brlcad-svn-trunk/src/libbn/tests |
13:09.24 | MarcTannous | there should also be a cmaketest.txt file you're going to have to change |
13:14.09 | YashM | i was looking at sourceforge lol |
13:15.17 | MarcTannous | the link you are looking at might be antiquated |
13:15.27 | MarcTannous | let me find the up-to-date one |
13:15.54 | MarcTannous | here you are |
13:15.56 | MarcTannous | https://svn.code.sf.net/p/brlcad/code/brlcad/trunk/ |
13:16.14 | MarcTannous | might want to build an environment to work on though, would be easier |
13:19.02 | ignacio | MarcTannous, maybe http://kuckuck.treehouse.su:5002/ |
13:24.36 | Notify | 03GCI:nawaninikhil63 * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Task Claimed - I would like to work on this task. |
13:29.48 | Notify | 03GCI:deepakkumarsharma * 5604954702086144 Fix at least 8 spelling mistakes in at least 8 different files #2: Task Assigned - This task has been assigned to nik. You have 100 hours to complete this... |
13:31.23 | MarcTannous | ignacio: " This webpage is not available" |
13:31.36 | ignacio | MarcTannous, wait 1 second |
13:32.42 | ignacio | MarcTannous, http://kuckuck.treehouse.su:5000/ |
13:33.46 | MarcTannous | wow, the design on this is so much better |
13:33.55 | MarcTannous | might want to have the homepage redirect o "all" though |
13:34.04 | Notify | 03GCI:jatintaneja17 * 6356815033925632 Design a BRL-CAD Sticker #9: Ready for review - The work on this task is ready to be reviewed. |
13:34.27 | MarcTannous | I'm going to grab some books, will be back in 2 hours guys, have a good day |
14:00.44 | Notify | 03GCI:Melange * 4949440150372352 Design a BRL-CAD splash screen #4: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
14:02.32 | *** join/#brlcad blessing (~blessing@154.70.104.145) |
14:37.21 | Notify | 03GCI:martinhesa * 6182685047259136 Design a BRL-CAD splash screen: Ready for review - The work on this task is ready to be reviewed. |
14:51.45 | YashM | any mentors here can check my task? |
14:53.23 | Notify | 03GCI:rohit_agarwal * 4544323332866048 Design a T-Shirt for BRL-CAD #6: Spelling Corrected - Sorry for the spelling mistake. I have corrected it in Tshirt 1C.png/.xcf |
14:59.43 | *** join/#brlcad merzo (~merzo@102-115-133-95.pool.ukrtel.net) |
15:10.34 | *** join/#brlcad ries (~ries@D979C47E.cm-3-2d.dynamic.ziggo.nl) |
15:27.40 | Notify | 03GCI:vladyordanov * 6433230555185152 Design a banner for our Facebook page (and/or other social media sites) #5 http://www.google-melange.com/gci/task/view/google/gci2014/6433230555185152: None ... |
15:28.08 | YashM | Any mentors herE? |
15:35.06 | *** join/#brlcad merzo_ (~merzo@102-115-133-95.pool.ukrtel.net) |
15:37.03 | Notify | 03GCI:firstof5 * 5538296809652224 Design a banner for our Facebook page (and/or other social media sites) #4: Ready for review - The work on this task is ready to be reviewed. |
15:48.59 | *** join/#brlcad sofat (~sofat@202.164.45.204) |
15:56.30 | Notify | 03GCI:adityagulati * 5797874164039680 Create a book layout for Doc Camp Book #2: Reviewal delails - Sir, When You Review The Files, Please Start From The Files That I Have Uploaded From"December... |
15:59.34 | MarcTannous | brlcad: can I get a review on my website page regarding contributors? |
16:03.09 | andromeda-galaxy | If anyone is reviewing tasks, can you please review them in order? |
16:04.39 | MarcTannous | anrdomeda-galaxy: did you submit anything regarding those global variables? |
16:05.05 | MarcTannous | I was not asking for brlcad to cross the line and jump straight to my task, I just knew he was a mentor at that specific one |
16:05.12 | MarcTannous | Did not know the irc nickname of the other mentors on the task |
16:09.21 | andromeda-galaxy | MarcTannous: No, no-one has re-reviewed my previous task yet. |
16:09.43 | andromeda-galaxy | It's been waiting for 15+ hours... |
16:10.59 | MarcTannous | damn |
16:11.43 | MarcTannous | did you choose a variable to remove? |
16:11.48 | MarcTannous | asking so that we don't overcross |
16:12.58 | andromeda-galaxy | no, not yet |
16:14.10 | Notify | 03GCI:vidushi * 5853389636239360 Design a BRL-CAD Sticker #3: None - do we have to submit a .jpg file or on adobe photoshop |
16:28.54 | Notify | 03GCI:ejozyazgan * 6360824117460992 Fix at least 8 spelling mistakes in at least 8 different files #4: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
16:35.32 | Notify | 03GCI:harman052 * 6356815033925632 Design a BRL-CAD Sticker #9: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
16:37.35 | starseeker | andromeda-galaxy: what did you want libbn for in the fortran->C++ conversion? |
16:37.56 | starseeker | my impression was that the Fortran code itself is self-contained |
16:42.17 | starseeker | if you want to use vmath.h types, you can include just common.h, bu/defines.h and vmath.h in the github archive |
16:43.28 | Notify | 03GCI:ronaldoh373 * 5781103189164032 Create a BRL-CAD presentation template #8: Task Claimed - I would like to work on this task. |
16:43.59 | starseeker | ideally the NACA C++ code would be self-contained like the Fortran code, so other projects could more easily re-use it (OpenVSP, for example) |
16:44.34 | starseeker | Or, failing that, maybe some widely used math code like Eigen could be used |
16:45.54 | Notify | 03GCI:ronaldoh373 * 5781103189164032 Create a BRL-CAD presentation template #8: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
16:46.14 | starseeker | if using libbn makes things easier then the thing to do is to put the files in a subdirectory in BRL-CAD's src/proc-db directory (src/proc-db/naca say) |
16:47.07 | starseeker | that will be fine too, since the ultimate goal is to create a procedural geometry generation routine based on the naca code |
16:47.38 | *** join/#brlcad martinhesa (~Martin@22.Red-83-46-209.dynamicIP.rima-tde.net) |
16:47.48 | starseeker | if you're using BRL-CAD's libs, you may be able to stick with C instead of going to C++ |
16:48.39 | starseeker | andromeda-galaxy: if you go the src/proc-db/naca route, just provide a patch with that diff instead of the github deliverables in the task(s) - that will be fine |
16:50.37 | Notify | 03GCI:jatintaneja17 * 6356815033925632 Design a BRL-CAD Sticker #9: None - Plz tel wat are the things required in it "! |
16:50.47 | Notify | 03GCI:ronaldoh373 * 5781103189164032 Create a BRL-CAD presentation template #8: Task Claimed - I would like to work on this task. |
16:53.23 | andromeda-galaxy | starseeker: the NACA code uses a bunch of FORTRAn array/vector multiplication |
16:53.32 | andromeda-galaxy | which C doesn't have by default... |
16:53.39 | starseeker | ah |
16:53.52 | starseeker | OK, in that case I'd go with the src/proc-db/naca approach |
16:54.10 | andromeda-galaxy | Ok, I'll do that then... |
16:54.14 | andromeda-galaxy | One other question: |
16:54.26 | starseeker | do you want me to set up a directory for that purpose to save you the CMake stuff? |
16:54.35 | andromeda-galaxy | If you don't mind, that would be great |
16:54.51 | andromeda-galaxy | various parts of the Fortran use things related to the Fortran way of indexing arrays |
16:54.55 | andromeda-galaxy | (1-based) |
16:55.18 | andromeda-galaxy | should I use one-to-large arrays & stick with that indexing, or try to convert them all? |
16:55.43 | starseeker | whatever makes sense to you - the more "C-ish" you can get the code without introducing errors, the better |
16:55.55 | andromeda-galaxy | For example, the splprocs Lookup() function return values ues 0 for if number is less than a(1) |
16:56.22 | Stragus | Zero indexing everywhere would make more sense, and it's probably less error prone |
16:56.40 | Stragus | CPUs use zero indexing, it's Fortran that's broken :) |
16:56.49 | starseeker | andromeda-galaxy: I don't have a strong preference either way, but if you can switch to "standard" C conventions without error then go for it |
16:57.33 | MarcTannous | starseeker: do you ahve a quick solution for reverrting my local repo to the version online ( stable ) ?# |
16:57.33 | Notify | 03GCI:deepakkumarsharma * 5781103189164032 Create a BRL-CAD presentation template #8: Task Assigned - This task has been assigned to hardik. You have 100 hours to complete this task, good luck! |
16:57.44 | starseeker | svn revert -R * |
16:57.50 | starseeker | would that do what you want? |
16:57.53 | MarcTannous | how much would it take? |
16:57.58 | MarcTannous | hope so |
16:57.58 | starseeker | (from the top-level src dir) |
16:58.14 | starseeker | alternately, do a new checkout |
16:58.44 | andromeda-galaxy | starseeker: also, is there any kind of a testsuite for this code? |
16:58.46 | starseeker | if downloading is expensive, and you have the disk space, I'd suggest keeping a "clean" copy and making a working copy to do your experiments |
16:58.57 | starseeker | andromeda-galaxy: there are some input and output examples in the linked sites |
16:59.11 | starseeker | but only once all the key files are converted can we run those |
16:59.40 | MarcTannous | starseeeker: yep, that seems good practice |
16:59.47 | MarcTannous | could I do something like a local branch? |
16:59.58 | starseeker | I don't have any unit-test type tests - you could create some, of course, but you'd have to be able to get the initial inputs and outputs from Fortran |
16:59.59 | Notify | 03GCI:harman052 * 6356815033925632 Design a BRL-CAD Sticker #9: Lot of room for improvement - Jatin, Your design does not give any idea of what BRL-CAD is or its functions and features. We would... |
17:00.06 | starseeker | MarcTannous: not with svn |
17:00.11 | MarcTannous | damn |
17:00.24 | andromeda-galaxy | starseeker: I might try a couple of inputs/outputs in both once splprocs is converted |
17:00.43 | andromeda-galaxy | gfortran seems able to compile it... |
17:01.18 | starseeker | nods - it's probably not too hard to set up, but I know relatively little about Fortran so I don't know what the best way to go at it is other than "set up a program to call one function and print its outputs" |
17:01.25 | MarcTannous | starseeker: after andromeda-galaxy's task is reviewed, could someoen review mine? |
17:01.39 | starseeker | MarcTannous: I'm not actually a gci mentor this go-around |
17:02.15 | MarcTannous | oh, thank you for sacrificing your free time to helping us then :D |
17:02.42 | starseeker | no problem - the Fortran->C naca conversion was my idea, so it's only fair I help |
17:02.46 | MarcTannous | could you give me an impression on http://www.google-melange.com/gci/task/view/google/gci2014/6075139737255936 then? |
17:02.47 | gcibot | Design a web page that overviews the BRL-CAD contributors #4 |
17:02.47 | gcibot | Status: NeedsReview (3 days, 20 hours left) |
17:02.47 | gcibot | Mentor(s): Jacob B, Ch3ck |
17:02.58 | MarcTannous | ofc, if you have 2-3 minutes free |
17:03.47 | starseeker | I like it's simplicity and cleanness - is there a reason it's not using the full page width available? |
17:04.25 | starseeker | also, I would default to the BRL-CAD logo for cases where we don't have a picture (which will be a lot of them) |
17:05.05 | Notify | 03GCI:ronaldoh373 * 5781103189164032 Create a BRL-CAD presentation template #8: None - I have claimed the task so If you could just review it , i desperately want to work on this task. |
17:05.19 | YashM | Marc, how does your landing page work on 1440p and 4k monitors |
17:05.36 | MarcTannous | yashm: no idea, can't test |
17:05.40 | YashM | because the background i see is 1920x1080 |
17:05.49 | MarcTannous | yashm:this type of technology has not landed in Romaia yet |
17:05.55 | YashM | :o |
17:06.07 | MarcTannous | yashm: it scales to the appropriate width, but I think 4k is not 16:9, might be wrong |
17:06.16 | MarcTannous | starseeker: yeah, that's a great idea |
17:06.16 | Stragus | Without testing, knowing the HTML you wrote should tell how it would display... |
17:06.38 | MarcTannous | starseeker: I'm not using the full page width because it's easier to go responsive like this |
17:06.57 | YashM | someone with an nvidia card can downsample their resolution to 4k at 1080p monitor |
17:06.59 | MarcTannous | stragus: Well, I've been proven wrong yesterday on a 1360x1990 dispaly or something like that |
17:07.41 | MarcTannous | stragus: going full page with HTML is done by width:100%, but when the width/height report is something way different than 16:9 or 16:10 problems appear |
17:07.48 | YashM | that's a resolution ive never heard of |
17:07.52 | MarcTannous | neither have I |
17:07.59 | Stragus | Sounds like you could just resize the window to test then :) |
17:08.03 | MarcTannous | I think it's one of those vertical monitors or something |
17:08.07 | YashM | yea |
17:08.18 | MarcTannous | resize the window to 1360x1900? |
17:08.24 | MarcTannous | when my monitor is 1920x1080? |
17:08.29 | MarcTannous | not sure how I would go about doingg that |
17:09.04 | YashM | its probably a handheld device |
17:09.10 | YashM | a vertical monitor would suck |
17:09.21 | Stragus | Eheh |
17:09.21 | MarcTannous | actually not, one of my dev friends has one |
17:09.27 | MarcTannous | it's very good for visualizing code |
17:10.01 | MarcTannous | a 1080p monitor and one of those vertical monitors forms a great workspace |
17:10.40 | MarcTannous | by the way, I don't want to sound mean. If you guys find problems with my pages, just give me a print,resolution in which the issue happened and I'll do my best to fix it |
17:10.40 | Stragus | Seems my window manager on Linux lets me resize windows bigger than the X viewport |
17:11.04 | MarcTannous | Stragus: I'm on Windows, learned about the terminal like 2 days ago because of the GCI, and was amazed at how useful it can be |
17:11.15 | MarcTannous | Stragus: Linux is my fortee xD |
17:11.22 | MarcTannous | not my fortee* |
17:11.39 | Stragus | Got it. :) I don't think Windows lets you resize windows bigger than the viewport |
17:11.48 | MarcTannous | not as far as I know |
17:12.27 | MarcTannous | stragus: do you participate in the GCI or are you a mentor? not many contestants are used to Linux |
17:13.00 | Stragus | I'm not involved in GCI, I just work on projects parallel to BRL-CAD and contributed some code |
17:13.10 | MarcTannous | oh |
17:13.16 | YashM | :) that's great |
17:13.26 | starseeker | andromeda-galaxy: you'll probably want to use a local .h file instead of #including all the C files in one file (I'll set it up that way) but it's your call |
17:13.47 | andromeda-galaxy | starseeke: Okay, great! thank you |
17:13.56 | MarcTannous | what is andromeda-galaxy implementing?# |
17:14.11 | andromeda-galaxy | MarcTannous: Converting some old NACA Fortran into C |
17:14.36 | MarcTannous | andromeda-galaxy: wow, good luck mate. you are doing God's work :D |
17:15.04 | starseeker | heh - if he were doing that, he'd be converting it to Lisp ;-) |
17:15.06 | *** part/#brlcad MarcTannous (bc1a92f6@gateway/web/freenode/ip.188.26.146.246) |
17:15.27 | Stragus | That's spoken like ``Erik :p |
17:15.47 | *** join/#brlcad MarcTannous (bc1a92f6@gateway/web/freenode/ip.188.26.146.246) |
17:16.02 | Notify | 03GCI:jatintaneja17 * 6356815033925632 Design a BRL-CAD Sticker #9: None - Ok thanku ! I will improve ! Thanku for ur suggestion ! |
17:16.13 | starseeker | xkcd reference, actually: http://xkcd.com/224 |
17:16.57 | andromeda-galaxy | starseeker: I would like to convert it to lisp instead... It's a shame that BRL-CAD is all C |
17:17.13 | starseeker | heh - long history there |
17:17.26 | MarcTannous | andromeda-galaxy: what the hell are you studying in highschool man? How do you know so many coding languages? xD |
17:17.34 | andromeda-galaxy | On the topic of reusability, we could theoretically also release it later with a special header containing copies of the (few) BRL-CAD functions used |
17:18.13 | andromeda-galaxy | MarcTannous: Lots and lots of independent studying... |
17:18.44 | MarcTannous | andromeda-galaxy: I guess I used up all my free time on design xD |
17:19.04 | Stragus | It's nice exploring various languages early. I started with C at 12 years old and I'm still stuck to it 19 years later |
17:19.58 | MarcTannous | I started with C at 12 years old, too bad studying it at a high school level only implies knowing algorithms and no object oriented coding |
17:19.59 | Stragus | The languages you use define how you think as a programmer, and changing that mindset later is surprisingly difficult |
17:20.14 | MarcTannous | and now I have a basic understanding of the C in brl-cad, even though I should know way more |
17:21.23 | Notify | 03GCI:harman052 * 5797874164039680 Create a book layout for Doc Camp Book #2: Problem with files - Hi Aditya, Sorry, but I'm unable to view your files. Please check them for any issues. Regards, |
17:22.11 | starseeker | andromeda-galaxy: I'm not going to stub in all the files, because I'm wondering if epspsi.f90 should actually become content for naca.h |
17:22.40 | andromeda-galaxy | starseeker: looking at epspsi.f90, that's certainly a possibility |
17:22.53 | starseeker | andromeda-galaxy: yeah, I hadn't thought through that Fortran would have a lot of pre-packaged stuff C/C++ wouldn't |
17:23.17 | andromeda-galaxy | starseeker: I didn't realize it either until I got to EvaluateCubicAndDerives |
17:23.39 | andromeda-galaxy | It uses MATMUL() from fortran... |
17:23.48 | starseeker | Eigen would probably be the way to go for a general purpose sub-library, but Sean wouldn't like it if I diverted you from this approach (which is likely the straightest path to what we really want - procedural wings in BRL-CAD) |
17:24.21 | starseeker | will give it a go someday |
17:24.32 | andromeda-galaxy | starseeker: once it's all in C, changing which interfaces it uses for some functcions |
17:24.41 | andromeda-galaxy | should hopefully be easier than converting it from Fortran in the first place |
17:28.26 | Notify | 03GCI:vidushi * 5853389636239360 Design a BRL-CAD Sticker #3: Ready for review - The work on this task is ready to be reviewed. |
17:31.47 | Notify | 03BRL-CAD:starseeker * 63605 brlcad/trunk/src/proc-db/CMakeLists.txt: Stub in an naca proc-db |
17:32.01 | starseeker | andromeda-galaxy: there you go (r63605) |
17:32.17 | starseeker | that should give you the build framework you'll need |
17:32.36 | andromeda-galaxy | starseeker: great, thanks! |
17:34.11 | starseeker | if you do end up doing unit tests, feel free to check them in too in some fashion - we may want to hook them into the ctest framework |
17:35.04 | starseeker | you can look at src/libbu/tests to see how we set those kinds of things up now |
17:37.42 | andromeda-galaxy | starseeker: sure! |
17:37.51 | MarcTannous | starseeker can you please give me the revert command again? |
17:37.57 | MarcTannous | accidentally closed my irc client and lost it |
17:39.57 | MarcTannous | starseeker: ping |
17:40.26 | Stragus | svn revert -R * |
17:40.46 | *** join/#brlcad blessing (~blessing@41.205.22.3) |
17:41.38 | MarcTannous | ty somuch |
17:42.44 | *** join/#brlcad merzo (~merzo@102-115-133-95.pool.ukrtel.net) |
17:43.06 | *** join/#brlcad merzo_ (~merzo@102-115-133-95.pool.ukrtel.net) |
17:46.00 | martinhesa | Can a mentor review my task, please? |
17:46.01 | martinhesa | http://www.google-melange.com/gci/task/view/google/gci2014/6182685047259136 |
17:46.02 | gcibot | Design a BRL-CAD splash screen |
17:46.02 | gcibot | Status: NeedsReview (5 hours, 5 minutes left) |
17:46.02 | gcibot | Mentor(s): Jacob B, Mihai Neacsu |
17:46.42 | MarcTannous | mine has been waiting for evaluation the whole day :( |
17:46.48 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
17:46.50 | YashM | same here |
17:47.39 | Notify | 03GCI:parthmiglani_21 * 4936325870387200 Design a website icon set for brlcad.org: Ready for review - The work on this task is ready to be reviewed. |
17:47.42 | martinhesa | I've waited like 4 hours, I think it will take a bit then |
17:47.50 | Notify | 03GCI:Melange * 5264182400253952 Categorize all of BRL-CAD's commands into a spreadsheet: Task due soon - There are less than 24 hours left until the deadline, please submit your work soon. |
17:47.54 | YashM | it usually doesnt |
17:48.03 | YashM | but today is different |
17:49.04 | martinhesa | Yes, in fact my previous task took less than one hour |
17:49.05 | Notify | 03GCI:amaric * 6356614713966592 Design a BRL-CAD Sticker #11: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
17:51.09 | Notify | 03GCI:plaffontj * 5264182400253952 Categorize all of BRL-CAD's commands into a spreadsheet: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
17:52.14 | Notify | 03GCI:jatintaneja17 * 6356815033925632 Design a BRL-CAD Sticker #9: Ready for review - The work on this task is ready to be reviewed. |
17:53.49 | Notify | 03GCI:kristina97 * 6101246763073536 Create a book layout for Doc Camp Book #3: Task Claimed - I would like to work on this task. |
17:54.45 | Notify | 03GCI:deepakkumarsharma * 6101246763073536 Create a book layout for Doc Camp Book #3: Task Assigned - This task has been assigned to Kristina Pironkova. You have 100 hours to complete this task,... |
18:00.51 | Notify | 03GCI:ronaldoh373 * 5781103189164032 Create a BRL-CAD presentation template #8: Ready for review - The work on this task is ready to be reviewed. |
18:06.00 | YashM | night guys |
18:06.27 | Notify | 03GCI:ronaldoh373 * 5781103189164032 Create a BRL-CAD presentation template #8: None - done something, would you please take a look |
18:13.49 | Notify | 03GCI:Melange * 4959197779197952 Write manual page documentation (for off-g): Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
18:14.38 | Notify | 03GCI:kristina97 * 6101246763073536 Create a book layout for Doc Camp Book #3 http://www.google-melange.com/gci/task/view/google/gci2014/6101246763073536: Question Is this the book I have to... |
18:36.19 | MarcTannous | andromeda-galaxy: don't do db5_enc_len |
18:36.32 | MarcTannous | I have a patch that removes it from being declared globally but can't submit yet |
18:36.37 | MarcTannous | due to my previous task not being closed |
18:36.40 | MarcTannous | any mentor around? |
18:36.41 | andromeda_galaxy | MarcTannous: ok |
18:37.32 | MarcTannous | brlcad: can you please close/review my current task so I can submit my patch to the other task? |
18:37.39 | MarcTannous | ``Erik: same request as above, please |
18:40.30 | Notify | 03GCI:Melange * 5836136417067008 BRL-CAD Promotional Video: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
18:43.46 | Notify | 03GCI:fatima * 5202849461960704 Create a Motion Typography video for BRL-CAD #5: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
18:45.22 | andromeda-galaxy | If anyone is able to review tasks, please review them in order, as there are some that have been waiting for >16 hours. |
18:46.41 | MarcTannous | +1 |
18:47.38 | MarcTannous | having one task finished + one task waiting review is not nice :( |
19:04.19 | Notify | 03GCI:thevk * 5249781911781376 Identify and eliminate dead code (100+ lines) #4: Commiting - OK, so i have made changes in two files, that remove ~110 lines of code. How do i upload these to your... |
19:11.07 | Notify | 03GCI:Melange * 6717116350726144 Design a banner for our Facebook page (and/or other social media sites) #2: Task Reopened - Melange has detected that the final deadline has passed and it has... |
19:18.07 | *** join/#brlcad kintel (~kintel@unaffiliated/kintel) |
19:18.24 | *** join/#brlcad blessing (~blessing@41.205.22.3) |
19:19.38 | Notify | 03GCI:dirky * 5042004748664832 Reproduce any 5 unconfirmed open bug reports: Task Claimed - I would like to work on this task. |
19:25.50 | Notify | 03GCI:Melange * 4951935593480192 Design a banner for our Facebook page (and/or other social media sites) #8: Task Reopened - Melange has detected that the final deadline has passed and it has... |
19:33.50 | *** join/#brlcad dirky (5225b938@gateway/web/freenode/ip.82.37.185.56) |
20:01.37 | Notify | 03GCI:Melange * 6127620076863488 Compile BRL-CAD using Microsoft Visual Studio Express 2013: No more Work can be submitted - Melange has detected that the deadline has passed and no more work can be... |
20:12.28 | MarcTannous | well, I'm off for the night |
20:12.46 | MarcTannous | hope my task gets evaluated over the night, so that I can submit the code one I've been working hard to get done :d |
20:12.50 | MarcTannous | good night guys |
20:18.22 | Notify | 03GCI:ch3ck * 5042004748664832 Reproduce any 5 unconfirmed open bug reports: Task Assigned - This task has been assigned to Dirk Brink. You have 100 hours to complete this task, good luck! |
20:27.36 | *** join/#brlcad MartinHermida (~Martin@22.Red-83-46-209.dynamicIP.rima-tde.net) |
20:28.40 | Notify | 03GCI:winghouchan * 5561255020462080 Design a new website landing page for BRL-CAD #4: Task Claimed - I would like to work on this task. |
20:30.16 | Notify | 03GCI:rossberg * 5561255020462080 Design a new website landing page for BRL-CAD #4: Task Assigned - This task has been assigned to Wing-Hou Chan. You have 100 hours to complete this task, good luck! |
20:34.26 | Notify | 03GCI:winghouchan * 5561255020462080 Design a new website landing page for BRL-CAD #4: Specification Query #1 - Howdy! Just a query regarding a the specification. "The output should be 2 design... |
20:37.44 | *** join/#brlcad blessing (~blessing@41.205.22.3) |
20:40.39 | Notify | 03GCI:winghouchan * 5561255020462080 Design a new website landing page for BRL-CAD #4: Update #1 - Howdy! Just to let you know work can be found in a public GitHub repository. Here is the link:... |
20:40.49 | Notify | 03GCI:manastaneja * 6690570030284800 Design a T-Shirt for BRL-CAD: Ready for review - The work on this task is ready to be reviewed. |
20:43.09 | Notify | 03GCI:manastaneja * 6690570030284800 Design a T-Shirt for BRL-CAD: The original file is - BRL-CAD t-shirt.xcf - The original file is - BRL-CAD t-shirt.xcf......so please review that file only.... |
20:51.11 | starseeker | andromeda-galaxy: Upon reflection, I'm going to go with the BSD license for the naca files rather than LGPL - that will make it easier to re-use the work if someone does want to do a stand-alone verison later, and it's closer to the public domain license on the originals |
20:51.38 | andromeda-galaxy | starseeker: that should be fine. |
20:55.04 | Notify | 03BRL-CAD:starseeker * 63606 (brlcad/trunk/src/proc-db/naca/naca.h brlcad/trunk/src/proc-db/naca/naca456.c brlcad/trunk/src/proc-db/naca/splprocs.c): Upon reflection, go with BSD for the naca file translations. Even though we'll be using libbn et. al. for this, if someone wants to make a stand-alone library out of them the work may be useful and it's closer in spirit to the public domain permissions of naca456 work |
20:55.06 | Notify | we are building on. |
20:56.08 | andromeda-galaxy | starseeker: pretty much finished the first port of splprocs.c |
20:56.18 | andromeda-galaxy | Haven't had a chance to do any kind of tests for it yet, thouogh |
20:56.23 | starseeker | sweet! |
20:56.38 | andromeda-galaxy | I decided to try to stick fairly closely to the Fortran code so that it would hopefully have fewer bugs... |
20:56.47 | starseeker | andromeda-galaxy: exactly my thought |
20:57.02 | andromeda-galaxy | I made a struct fortran_array for 1-indexed arrays that includes a length |
20:57.10 | andromeda-galaxy | and then a whole bunch of Fortran-like macros to operate on those |
20:57.42 | starseeker | gradual migration can take place once we've got something working - if you've identified good incremental steps that's excellent |
20:58.19 | andromeda-galaxy | That's what I was thinking as well... the code currently maps fairly directly back onto the Fortran |
20:58.30 | starseeker | let me know if r63606 causes any problems for you on merge - it should apply cleanly... |
20:58.32 | andromeda-galaxy | and it does use globals for EvaluateCubic the same way the Fortran does |
20:58.59 | andromeda-galaxy | r63606 did apply cleanly |
20:59.05 | starseeker | phew |
20:59.10 | *** join/#brlcad Manas (~t.mns2001@59.91.68.236) |
20:59.12 | andromeda-galaxy | the first step towards nicer C code is probably to get rid of those globals |
20:59.16 | starseeker | nods |
20:59.35 | starseeker | when we get to the array indexing, unit tests may well be in order |
20:59.42 | andromeda-galaxy | Then the really big thing is to make all the arrays 0-indexed & get rid of struct fortran_array |
20:59.45 | starseeker | that can be... touchy |
20:59.51 | andromeda-galaxy | agreed |
21:00.10 | andromeda-galaxy | I thought that we should wait to do any of the rewriting until we have tests |
21:00.17 | starseeker | andromeda-galaxy: definitely |
21:00.36 | andromeda-galaxy | then, once we know that everything is working correctly, we can slowly migrate it towards being written more nicely... |
21:01.26 | starseeker | once it's working correctly, you'll get to chose between continuing to clean it up or actually trying to generate BRL-CAD geometry using it ;-) |
21:01.38 | andromeda-galaxy | starseeker: true... both are interesting possibilities |
21:01.42 | starseeker | or both, depending on how hard it proves - not sure yet |
21:02.37 | andromeda-galaxy | I can't submit it too the GCI task yet, unfortunately, because I'm still waiting for reviews on my current one (and I have one more ready to put up as well) |
21:02.41 | starseeker | 's instinct would be to do the clean-up while it's still "in-context" but either would be awesome |
21:03.00 | starseeker | nods |
21:03.13 | andromeda-galaxy | starseeker: I think that's probably a good idea... It also has the advantage that we could clean up the API a little bit before trying to get BRL-CAD to use it for geometry generation. |
21:04.02 | starseeker | nods - ideally it would be nice to create a "mini-library" within the proc-db - libnaca or some such - that provides a library API for the NACA inputs/outputs |
21:04.37 | starseeker | that would be the BSD portion of the code, and then our proc-db could use the library interface |
21:04.57 | andromeda-galaxy | ahh.. Interesting |
21:04.59 | andromeda-galaxy | that makes sense |
21:05.40 | starseeker | assembling and stitching NURBS surfaces into a BRep is not all that simple, in practice... doable, but I'm not quite sure at this stage how to break it into GCI tasks |
21:06.00 | starseeker | and that presupposes we've successfully gotten openNURBS surfaces out of the NACA outputs |
21:07.05 | starseeker | or rather, generated them using those outputs |
21:07.29 | andromeda-galaxy | starseeker: indeed... figuring out how to turn the NACA outputs into NURBS surfaces will probably take some thtinkinig |
21:08.05 | starseeker | that itself may be beyond GCI scope, so it's probably better to focus on the cleanup initially |
21:08.11 | starseeker | that'll pay off immediately |
21:08.37 | andromeda-galaxy | starseeker: makes sense. Sounds like a good plan to go forwards with. |
21:09.09 | andromeda-galaxy | starseeker: I'll also ask brlcad if he can create a GCI task for doing some unit tests for the converted coe |
21:09.21 | starseeker | nods |
21:10.23 | starseeker | I think with the approach you're taking you'll be OK to go with the I/O tests from naca456 intitially, but we'll want those before the fortranish C -> real C move |
21:12.09 | andromeda-galaxy | starseeker: I'm not sure if I understand exactly what you're saying... I was thinking that we should have a number of tasks to do unit tests for the public functions in each file as well as having some tests for the whole assembly |
21:12.16 | andromeda-galaxy | and then after those are done, start cleaning up the C code |
21:13.30 | starseeker | ah. The way I had originally outlined the project was to do the initial Fortran -> C conversion of the four key files as four tasks, which would each individually be "this file compiles and looks complete to the eye but is not yet tested" |
21:14.02 | starseeker | then a fifth task would be take the naca456 input and output examples, and verify the C code was right, fixing any issues that cropped up |
21:14.17 | andromeda-galaxy | hmm... Given the amount of work that converting this one took, I'll definitely say that having one task for each conversion to "compiles and not tested" is good |
21:14.24 | Notify | 03GCI:judebirch * 4951935593480192 Design a banner for our Facebook page (and/or other social media sites) #8: Task Claimed - I would like to work on this task. |
21:14.27 | starseeker | too long? |
21:14.29 | andromeda-galaxy | I was just thinking of adding another 4 for tests... |
21:14.35 | andromeda-galaxy | More tests can never be a bad thing, right? |
21:14.39 | starseeker | ah |
21:14.45 | starseeker | sorry, misread |
21:15.09 | starseeker | right - after we match naca456, then the next 4 tasks would be setting up unit testing |
21:15.28 | starseeker | (or maybe 3, if that one file ends up being all header defines) |
21:15.37 | andromeda-galaxy | sounds like a good plan |
21:16.10 | starseeker | then the next 3/4 would be refactors (globals gone, indexing fixed, whatever else pops up) |
21:16.10 | Notify | 03GCI:ch3ck * 4951935593480192 Design a banner for our Facebook page (and/or other social media sites) #8: Task Assigned - This task has been assigned to Jude. You have 100 hours to complete this... |
21:16.25 | Notify | 03GCI:Melange * 6741580216008704 Design a T-Shirt for BRL-CAD #5: Task Reopened - Melange has detected that the final deadline has passed and it has reopened the task. |
21:17.09 | Notify | 03GCI:ch3ck * 6690570030284800 Design a T-Shirt for BRL-CAD: None - Hello, Could you please submit this file and jpeg or anything but xcf? having some viewing problems. Thanks |
21:17.31 | starseeker | then a few more to rework what is currently a file/text I/O process into an actual callable API that accepts numbers and settings either as parameters or maybe a struct and returns a list of points (or whatever makes sense for their outputs) |
21:18.27 | starseeker | the last may be fairly simple, but we'll want to preserve the ability to process and generate the files to allow for regression testing (probably in utility programs) |
21:19.14 | starseeker | andromeda-galaxy: bit of a quicksand bog, isn't it? ;-) |
21:19.42 | andromeda-galaxy | indeed :-) |
21:19.50 | starseeker | hopefully it's reasonably interesting |
21:20.09 | andromeda-galaxy | starseeker: it certainly seems like it will be |
21:25.19 | *** join/#brlcad teepee (~teepee@gateway/tor-sasl/teepee) |
21:27.15 | Notify | 03GCI:mandeep * 5538296809652224 Design a banner for our Facebook page (and/or other social media sites) #4: None - Nice try! Change white color in text with the background color as it looks odd.... |
21:27.25 | Notify | 03GCI:mandeep * 5538296809652224 Design a banner for our Facebook page (and/or other social media sites) #4: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to... |
21:30.27 | Notify | 03GCI:mandeep * 5538296809652224 Design a banner for our Facebook page (and/or other social media sites) #4: Deadline extended - The deadline of the task has been extended with 1 days and 16 hours. |
21:44.24 | Notify | 03GCI:jksoft * 6127396939890688 Design a new website landing page for BRL-CAD: I'm interrested! - Before I claim this task, I just have few questions. So your current website is the existing/old... |
21:55.00 | Notify | 03GCI:mandeep * 5853389636239360 Design a BRL-CAD Sticker #3: Need a better design - Hi Vidushi, You are doing good, but your design need improvements. The logo looks blurred and color combination... |
21:55.10 | Notify | 03GCI:mandeep * 5853389636239360 Design a BRL-CAD Sticker #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy... |
22:01.05 | Notify | 03GCI:firstof5 * 5538296809652224 Design a banner for our Facebook page (and/or other social media sites) #4: None - Thank you for your feedback, Ive changed the white space in the text, But how... |
22:14.27 | andromeda-galaxy | starseeker: Should I use HIDDEN on the functions that are marked PRIVATe in splprocs.590? |
22:31.44 | *** join/#brlcad winghouchan (~winghouch@0544ed17.skybroadband.com) |
22:34.42 | Notify | 03GCI:judebirch * 4951935593480192 Design a banner for our Facebook page (and/or other social media sites) #8: Ready for review - The work on this task is ready to be reviewed. |
22:41.24 | winghouchan | Howdy peeps! I'm Wing! Just saying 'hi' and that I'm working on creating a new landing page! |
22:52.03 | Notify | 03GCI:Melange * 6182685047259136 Design a BRL-CAD splash screen: No more Work can be submitted - Melange has detected that the deadline has passed and no more work can be submitted. The submitted... |
23:09.23 | *** join/#brlcad winghouchan (~winghouch@0544ed17.skybroadband.com) |
23:09.42 | Notify | 03GCI:Melange * 6359310477033472 Design a banner for our Facebook page (and/or other social media sites) #3: Task Reopened - Melange has detected that the final deadline has passed and it has... |
23:27.18 | Notify | 03GCI:ludwant123 * 5303979902763008 Design a web page that overviews the BRL-CAD contributors #3: Is the task just to create a website with the contributors information on it? - Are we supposed to... |
23:31.09 | Notify | 03GCI:articwolf * 6717116350726144 Design a banner for our Facebook page (and/or other social media sites) #2: Task Claimed - I would like to work on this task. |
23:34.09 | *** join/#brlcad winghouchan (~winghouch@0544ed17.skybroadband.com) |
23:50.56 | brlcad | winghouchan: glad to hear it! |
23:59.06 | brlcad | andromeda-galaxy: I did and it's concerning, but I don't have time to discuss right now |
23:59.17 | andromeda-galaxy | brlcad: okay, thanks |
23:59.47 | Notify | 03GCI:winghouchan * 5561255020462080 Design a new website landing page for BRL-CAD #4: Specification Discussion - Heyo! I've began setting up the necessary files I need and started brewing some... |