| 00:02.19 | *** join/#brlcad merzo (~merzo@71-40-132-95.pool.ukrtel.net) |
| 00:14.49 | Notify | 03GCI:starseeker * 6441264325066752 Create unit tests for our basic utility library (LIBBU) #3: Task Assigned - This task has been assigned to Johannes Schulte. You have 72 hours to complete this... |
| 00:17.19 | Notify | 03GCI:starseeker * 5865810849431552 Write draft of BRL-CAD application interface design guidelines: It's fairly free form - You get to propose a set of design criteria - the links are just to give... |
| 00:33.36 | Notify | 03BRL-CAD:j-schulte * 59264 brlcad/trunk/src/libbu/tests/CMakeLists.txt: Add unit test for date-time.c from libbu (GCI task: http://www.google-melange.com/gci/task/view/google/gci2013/6441264325066752) |
| 00:35.16 | Notify | 03GCI:Johannes Schulte * 6441264325066752 Create unit tests for our basic utility library (LIBBU) #3: Ready for review - The work on this task is ready to be reviewed. |
| 00:36.22 | Notify | 03GCI:Johannes Schulte * 6441264325066752 Create unit tests for our basic utility library (LIBBU) #3 http://www.google-melange.com/gci/task/view/google/gci2013/6441264325066752: Questions When... |
| 00:38.08 | Notify | 03GCI:Sean * 5873716877590528 Create a precise modeling transcript for modeling a simple toy car: Task Assigned - This task has been assigned to Jacob Fine. You have 72 hours to complete this task,... |
| 00:38.13 | Notify | 03GCI:Sean * 5332162035318784 Write a wiki page on joining the BRL-CAD project: Task Assigned - This task has been assigned to Michael. You have 72 hours to complete this task, good luck! |
| 01:55.15 | Notify | 03GCI:Michael * 5332162035318784 Write a wiki page on joining the BRL-CAD project: Ready for review - The work on this task is ready to be reviewed. |
| 01:59.57 | Notify | 03GCI:fernozzle * 5034143381454848 Compile BRL-CAD on Windows using Cygwin: Task Claimed - I would like to work on this task. |
| 02:08.48 | brlcad | maths22: http://www.google-melange.com/gci/task/view/google/gci2013/5780674933948416 |
| 02:08.48 | gcibot | Update Fisheye installation |
| 02:08.49 | gcibot | Status: Open |
| 02:08.49 | gcibot | Mentor(s): Sean |
| 02:16.32 | Notify | 03GCI:Sean * 5300578120892416 Implement new API function to reduce duplication #3: duplication - Number of lines is irrelevant. Any code duplication warrants refactoring. What's not clear to me... |
| 02:17.46 | maths22 | brlcad: thanks |
| 02:19.04 | maths22 | rx |
| 02:19.12 | maths22 | oops :) |
| 02:19.17 | Notify | 03GCI:Sean * 5300578120892416 Implement new API function to reduce duplication #3 http://www.google-melange.com/gci/task/view/google/gci2013/5300578120892416: BoT task Note that there is a BoT... |
| 02:23.17 | Notify | 03GCI:Jacob B * 5315017800941568 Enable a new compiler warning, fix any issues that ensue #3: Ready for review - The work on this task is ready to be reviewed. |
| 02:28.48 | Notify | 03GCI:Sean * 5300578120892416 Implement new API function to reduce duplication #3 http://www.google-melange.com/gci/task/view/google/gci2013/5300578120892416: bot surface area There's not a BoT... |
| 02:45.27 | Notify | 03GCI:Sean * 5300578120892416 Implement new API function to reduce duplication #3 http://www.google-melange.com/gci/task/view/google/gci2013/5300578120892416: follow-on A task for BoT mesh... |
| 03:12.11 | Notify | 03GCI:Sean * 5849146376323072 Model pliers in 3D using BRL-CAD: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 03:12.56 | Notify | 03GCI:Sean * 5849146376323072 Model pliers in 3D using BRL-CAD: overlaps - Looks fantastic, but there are 0.25mm overlaps (the handles iirc). |
| 03:28.42 | Notify | 03GCI:Sean * 6441264325066752 Create unit tests for our basic utility library (LIBBU) #3: few issues - Few issues: Missing header and footer The #include "stdio.h" isn't right, system headers are... |
| 03:28.43 | Notify | 03GCI:Sean * 6441264325066752 Create unit tests for our basic utility library (LIBBU) #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s)... |
| 03:29.02 | Notify | 03GCI:Sean * 5034143381454848 Compile BRL-CAD on Windows using Cygwin: Task Assigned - This task has been assigned to fernozzle. You have 72 hours to complete this task, good luck! |
| 03:31.52 | Notify | 03GCI:Sean * 5332162035318784 Write a wiki page on joining the BRL-CAD project: Missing a lot - Michael, did you check out all of the examples? Particularly the Gnome and Ubuntu examples are really... |
| 03:31.53 | Notify | 03GCI:Sean * 5332162035318784 Write a wiki page on joining the BRL-CAD project: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to... |
| 03:33.02 | Notify | 03GCI:Sean * 5660495776317440 Create prototype 2D Drawing: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the... |
| 03:36.34 | Notify | 03GCI:Sean * 5660495776317440 Create prototype 2D Drawing http://www.google-melange.com/gci/task/view/google/gci2013/5660495776317440: not the right task Ilkin, what you submitted has nothing to... |
| 04:27.53 | Notify | 03GCI:Sean * 5315017800941568 Enable a new compiler warning, fix any issues that ensue #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s)... |
| 04:29.53 | *** join/#brlcad microchip_sac (~microchip@223.239.198.244) |
| 04:43.49 | maths22 | brlcad: what needs work? I'm sure something does, but I'm not sure what |
| 04:51.18 | brlcad | maths22: took me a while to write the reply |
| 04:51.19 | Notify | 03GCI:Sean * 5315017800941568 Enable a new compiler warning, fix any issues that ensue #3: almost good - Wow, this was a really tricky patch to review... nice work doing your homework, though. It... |
| 04:51.20 | brlcad | that was a tough one |
| 04:52.11 | brlcad | I had to pull out documentation on a number of points to make sure things were right/wrong |
| 05:31.57 | *** join/#brlcad microchip_sac (~microchip@223.239.198.244) |
| 05:38.16 | microchip_sac | I'm working on http://www.google-melange.com/gci/task/view/google/gci2013/5240158668455936 |
| 05:38.18 | gcibot | Enable a new compiler warning, fix any issues that ensue #5 |
| 05:38.18 | gcibot | Status: NeedsWork (4 days, 6 hours left) |
| 05:38.18 | gcibot | Mentor(s): Kesha Shah |
| 05:38.50 | microchip_sac | and I've fixed the warnings that occur *without* the new flag because of my changes |
| 05:39.11 | microchip_sac | other than those, is the patch OK? |
| 05:39.23 | microchip_sac | should I submit a new build log and patch for review now? |
| 05:48.28 | brlcad | microchip_sac: that is what the last comment said, no? |
| 05:48.43 | brlcad | just make sure to submit a "make -k" with the flag enabled |
| 05:48.58 | brlcad | need to get an idea of how many issues remain |
| 05:49.06 | brlcad | the previous logs looked like they were not -k |
| 06:32.18 | *** join/#brlcad kesha (~kesha@14.139.122.114) |
| 06:52.54 | Notify | 03GCI:Sharan Narayan * 5849146376323072 Model pliers in 3D using BRL-CAD: Ready for review - The work on this task is ready to be reviewed. |
| 06:56.31 | *** join/#brlcad microchip_sac (~microchip@223.239.198.244) |
| 06:58.54 | Notify | 03GCI:Sean * 5849146376323072 Model pliers in 3D using BRL-CAD: Task Closed - Congratulations, this task has been completed successfully. |
| 07:03.20 | Notify | 03GCI:Sean * 4773374307860480 Fix MGED crash on Mac OS X: more info - Yash, if you followed the steps correctly and cannot reproduce the crash, you can claim the task, submit details on what you... |
| 07:04.55 | Notify | 03GCI:Sean * 5054849284571136 Doxygen cleanup for LIBWDB http://www.google-melange.com/gci/task/view/google/gci2013/5054849284571136: SVN Information on how to obtain BRL-CAD's sources is... |
| 07:07.25 | Notify | 03GCI:Sean * 4549761130561536 Create an utility library (LIBBU) API unit test for any file: no follow-up - Arjun, have you given up on this? Your last comment made it sound like you'd fixed the... |
| 07:08.35 | Notify | 03GCI:Sean * 5675661037404160 Create numerics library (LIBBN) unit test for rand.c http://www.google-melange.com/gci/task/view/google/gci2013/5675661037404160: SVN Information on how to obtain... |
| 07:11.00 | Notify | 03GCI:Sean * 6501205291302912 Fix at least 8 spelling mistakes in at least 8 different files: nobody? - This task is so close to completion, just was submitted in the wrong format. Is nobody really... |
| 07:16.30 | *** join/#brlcad caen23 (~caen23@92.81.162.63) |
| 07:56.56 | Notify | 03GCI:Sharan Narayan * 6012644171448320 Find, reliably reproduce, and report any bug in MGED: Task Claimed - I would like to work on this task. |
| 07:59.46 | Notify | 03GCI:Sharan Narayan * 6012644171448320 Find, reliably reproduce, and report any bug in MGED: SourceForge - Where to Sumbit, Should I submit my bug report to sourceforge.net? |
| 08:48.46 | *** join/#brlcad microchip_sac (~microchip@223.239.198.244) |
| 09:43.39 | Notify | 03GCI:Alexandra Covor * 5804117939191808 Design a cover image or banner for our Facebook page (and/or another social media site) #15: Ready for review - The work on this task is ready to be... |
| 09:44.19 | Notify | 03GCI:Ilkin Musaev * 5660495776317440 Create prototype 2D Drawing: Ready for review - The work on this task is ready to be reviewed. |
| 10:59.45 | *** join/#brlcad chick_ (~chick_@41.204.83.2) |
| 10:59.59 | chick_ | #join #ublab |
| 11:06.14 | Notify | 03BRL-CAD:j-schulte * 59265 brlcad/trunk/src/libbu/tests/bu_date-time.c: fix r59264 |
| 11:06.15 | Notify | 03GCI:AdityaGulati * 6387756011880448 Create a Motion Typography video for BRL-CAD #4: Task Claimed - I would like to work on this task. |
| 11:07.29 | Notify | 03GCI:Johannes Schulte * 6441264325066752 Create unit tests for our basic utility library (LIBBU) #3: Ready for review - The work on this task is ready to be reviewed. |
| 11:38.48 | *** join/#brlcad microchip_sac (~microchip@223.239.198.244) |
| 13:07.22 | Notify | 03GCI:Vipul Sharma * 5902558589616128 Design a BRL-CAD Sticker #14: Ready for review - The work on this task is ready to be reviewed. |
| 13:12.02 | Notify | 03GCI:Vipul Sharma * 5902558589616128 Design a BRL-CAD Sticker #14: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 13:12.03 | Notify | 03GCI:Vipul Sharma * 5902558589616128 Design a BRL-CAD Sticker #14: Task Claimed - I would like to work on this task. |
| 13:12.07 | *** join/#brlcad KimK (~Kim__@24.255.223.153) |
| 13:55.28 | Notify | 03GCI:Andromeda Galaxy * 5895393510424576 Improve the superellipsoid surface area implementation: Ready for review - The work on this task is ready to be reviewed. |
| 14:11.45 | Notify | 03GCI:Sean * 5902558589616128 Design a BRL-CAD Sticker #14: Task Assigned - This task has been assigned to Vipul Sharma. You have 168 hours to complete this task, good luck! |
| 14:12.05 | Notify | 03GCI:Sean * 6387756011880448 Create a Motion Typography video for BRL-CAD #4: Task Assigned - This task has been assigned to AdityaGulati. You have 72 hours to complete this task, good luck! |
| 14:12.20 | Notify | 03GCI:Sean * 6012644171448320 Find, reliably reproduce, and report any bug in MGED: Task Assigned - This task has been assigned to Sharan Narayan. You have 72 hours to complete this task, good luck! |
| 14:12.52 | maths22 | brlcad: thanks |
| 14:13.14 | maths22 | I don't know if you noticed in the log, but there were two warnings I could not figure out how to fix |
| 14:13.17 | maths22 | is that ok? |
| 14:13.56 | Notify | 03GCI:Sean * 5660495776317440 Create prototype 2D Drawing: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the... |
| 14:14.49 | *** join/#brlcad kesha (~kesha@49.202.231.149) |
| 14:19.00 | Notify | 03GCI:Sean * 5660495776317440 Create prototype 2D Drawing: much better - This is much better but your prototype looks incomplete. What are all of those little boxes for? That goes into each of the... |
| 14:19.27 | Notify | 03GCI:Sean * 6441264325066752 Create unit tests for our basic utility library (LIBBU) #3: Task Closed - Congratulations, this task has been completed successfully. |
| 14:21.17 | Notify | 03GCI:Sean * 5804117939191808 Design a cover image or banner for our Facebook page (and/or another social media site) #15: Task Closed - Congratulations, this task has been completed successfully. |
| 14:25.34 | Notify | 03GCI:Sean * 5895393510424576 Improve the superellipsoid surface area implementation: Task Closed - Congratulations, this task has been completed successfully. |
| 14:26.58 | *** join/#brlcad microchip_sac (~microchip@223.239.198.74) |
| 14:27.56 | *** join/#brlcad kesha_ (~kesha@49.249.17.247) |
| 14:29.13 | Notify | 03GCI:Sharan Narayan * 6012644171448320 Find, reliably reproduce, and report any bug in MGED: Ready for review - The work on this task is ready to be reviewed. |
| 14:34.01 | Notify | 03GCI:Andromeda Galaxy * 5895393510424576 Improve the superellipsoid surface area implementation: Performance improvement - Sorry, I forgot to post these numbers in the explanation file: 10 runs of... |
| 14:35.46 | Notify | 03GCI:Andromeda Galaxy * 5895393510424576 Improve the superellipsoid surface area implementation: One more performance improvement - I had one more idea for another performance improvement after I... |
| 14:36.03 | *** join/#brlcad andromeda-galaxy (~user@61.3.164.205) |
| 14:36.11 | Notify | 03GCI:Sean * 5895393510424576 Improve the superellipsoid surface area implementation: some problems - Andromeda, this looks good but you did introduce a new constant (500000) without documenting... |
| 14:37.16 | Notify | 03GCI:Sean * 6012644171448320 Find, reliably reproduce, and report any bug in MGED: Task Closed - Congratulations, this task has been completed successfully. |
| 14:37.36 | andromeda-galaxy | brlcad: Can I talk to you for a minute about those two constants that I changed? |
| 14:37.38 | brlcad | maths22: I commented on those two |
| 14:37.44 | brlcad | andromeda-galaxy: sure |
| 14:38.34 | maths22 | you didn't comment on theme here http://www.google-melange.com/gci/task/view/google/gci2013/5315017800941568 |
| 14:38.35 | gcibot | Enable a new compiler warning, fix any issues that ensue #3 |
| 14:38.35 | gcibot | Status: NeedsWork (5 days, 4 hours left) |
| 14:38.35 | gcibot | Mentor(s): Daniel Rossberg |
| 14:38.49 | andromeda-galaxy | brlcad: The reason that I said that in the comments is that many different sets of numbers get within 0.001 of the correct values in my tests, and these values gave the maximum performance for similar accuracy |
| 14:39.12 | brlcad | maths22: it's the second sentence |
| 14:39.45 | andromeda-galaxy | When the function was significantly sped up, this changed somewhat, as it became less expensive to start with much higher values, and to recompute more often: the faster convergence now outweighs the larger numbers at the beginning (I think) |
| 14:40.40 | maths22 | not those; |
| 14:40.57 | maths22 | you didn't see the other errors because I forgot to redirect stderr |
| 14:41.04 | brlcad | ahh |
| 14:41.53 | maths22 | will share errors shortly |
| 14:42.35 | brlcad | andromeda-galaxy: it's not that your comments weren't understandable |
| 14:42.41 | brlcad | they're just not useful :) |
| 14:43.16 | andromeda-galaxy | brlcad: I see --- what I was saying here is just why I think that these are the optimum values, even though one of them is an order of magnitude different |
| 14:43.18 | brlcad | you could have just as well said "these were the values that seemed to work best" |
| 14:43.29 | brlcad | it's two orders |
| 14:44.17 | andromeda-galaxy | brlcad: can you suggest a better way to find parameters that maximize performance? |
| 14:44.35 | andromeda-galaxy | and accuracy? |
| 14:44.37 | brlcad | that's the wrong question to be asking |
| 14:44.51 | andromeda-galaxy | I'm not sure how to go about doing it any more than this... |
| 14:45.38 | brlcad | let me see if I can show you another example |
| 14:46.05 | andromeda-galaxy | brlcad: okay, thanks |
| 14:46.40 | maths22 | http://paste.ubuntu.com/6684923/ |
| 14:47.24 | andromeda-galaxy | brlcad: by the way, the other constant that you mentioned (the +500000) was a slight mistake in the diff, it only needs to be +1; I added a comment just now explaining that the +1 is necessary to store both endpoints of the line of the grid that will be stored in the arrays |
| 14:48.30 | brlcad | andromeda-galaxy: okay, take a peek at src/libbu/heap.c where there are two constants there in #defines at the top of the file -- the comment tells you what the number means, what changes to it imply, and roughly talk about impact (performance) |
| 14:49.07 | maths22 | brlcad: those are the two errors |
| 14:49.31 | andromeda-galaxy | brlcad: okay, thanks --- I will try to rewrite my comments |
| 14:49.55 | andromeda-galaxy | would you mind taking a look at my final ones before commit? |
| 14:50.56 | brlcad | andromeda-galaxy: think about it like a variable, don't focus on the value itself -- that might help |
| 14:51.27 | andromeda-galaxy | brlcad: thank you for the help! |
| 14:51.41 | brlcad | andromeda-galaxy: like instead of *2 or *4, what would you call that? CONVERGENCE_RATE or STEPPING_SIZE or ... |
| 14:51.55 | brlcad | then without thinking about a value, document it |
| 14:52.05 | brlcad | what is it, what does it mean, how does it affect anything |
| 14:52.14 | brlcad | and this is all in just one or two sentences ;) |
| 14:52.41 | brlcad | it should just be useful/informative, and you probably won't end up talking about performance much at all (which is fine) |
| 14:53.25 | brlcad | I might be using a computer that is literally 100x faster than yours -- will that make the values you chose bad values? or will it be fine? |
| 14:53.47 | brlcad | or if I use a computer that's 100 times slower, ditto |
| 14:54.19 | andromeda-galaxy | brlcad: I think that these will still be fairly good values, but I'm not completely sure how to prove it... |
| 14:54.46 | brlcad | how do they affect quality? |
| 14:55.34 | brlcad | if you changed 1024 to 2048, how does that affect the sampling error of a 1m^3 superell? |
| 14:57.22 | brlcad | not to lose sight of the path through the forest, you could work for hours to understand your own numbers and that's not the goal |
| 14:57.34 | brlcad | the goal is to just document what you DO know now |
| 14:58.09 | brlcad | and to say something useful about them, what will be useful to other devs, which is to explain what those numbers are, what they mean, and how sensitive they are |
| 14:59.13 | andromeda-galaxy | brlcad: I have two more comments that I think are more useful |
| 14:59.20 | brlcad | k, go for it ;) |
| 14:59.40 | andromeda-galaxy | Would you mind looking at them quickly before I commit? |
| 14:59.50 | brlcad | just commit if you're comfortable with it |
| 14:59.57 | andromeda-galaxy | brlcad: okay, 1 minute |
| 15:00.12 | Notify | 03GCI:Ilkin Musaev * 5660495776317440 Create prototype 2D Drawing: Ready for review - The work on this task is ready to be reviewed. |
| 15:01.20 | brlcad | maths22: I see what you mean -- those two are just aweful bits of code |
| 15:01.25 | brlcad | awful even |
| 15:04.22 | brlcad | those are string numbers ... being read in and turned into pointers |
| 15:04.35 | brlcad | the second is even worse, turning the pointer into a function |
| 15:05.17 | Notify | 03GCI:Sean * 5660495776317440 Create prototype 2D Drawing: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the... |
| 15:06.09 | maths22 | is it ok then if I leave it? |
| 15:08.41 | brlcad | well if you leave it, the build will be broken :) |
| 15:09.04 | Notify | 03GCI:Sean * 5660495776317440 Create prototype 2D Drawing: okay to worse? - Ilkin, your design is digressing. What is effectivity? What is "designed data"? Not sure what would go into that column... |
| 15:09.38 | *** join/#brlcad kesha__ (~kesha@49.202.231.158) |
| 15:10.19 | andromeda-galaxy | brlcad: There was a slight conflict, where someone fixed a misspelling in my comment, so I'll commit in a minute; can you take a quick look at it when I do? |
| 15:11.06 | andromeda-galaxy | Also, did you see my comments about a couple of possible tasks/things to do after GCI? (one in the _explanations file, one on the website a minute ago) |
| 15:14.42 | Notify | 03BRL-CAD:peter-sa * 59266 brlcad/trunk/src/librt/primitives/superell/superell.c: This adds a significant performance gain to the superell surface area functions, from GCI task http://www.google-melange.com/gci/task/view/google/gci2013/5895393510424576 |
| 15:14.43 | gcibot | Improve the superellipsoid surface area implementation |
| 15:14.43 | gcibot | Status: Closed |
| 15:14.43 | gcibot | Mentor(s): Sean |
| 15:14.51 | brlcad | andromeda-galaxy: all commits are reviewed/watched by myself and others, no need to ask for that ;) |
| 15:15.03 | brlcad | that just happens automatically all the time, every commit |
| 15:15.42 | andromeda-galaxy | brlcad: okay, thanks |
| 15:15.58 | andromeda-galaxy | I wasn't entirely sure, so I thought it was better to ask |
| 15:16.34 | andromeda-galaxy | (I'm in general more used to projects with a pre-commit review, so I'm not entirely sure about the procedures for post-commit reviewing) |
| 15:17.14 | andromeda-galaxy | Do you think that my two other ideas are probably best as post-GCI? |
| 15:18.13 | brlcad | I must have missed what you're referring to in the explanations file -- you talked about how you improved performance and how you tried a fast sine approximation that sucked |
| 15:18.33 | andromeda-galaxy | I was actually saying that the two fast sine approximations are really good |
| 15:18.40 | andromeda-galaxy | it's just that this needs them to be really really good |
| 15:18.54 | brlcad | (which was pretty cool, but yeah we usually can't use them) |
| 15:19.27 | andromeda-galaxy | So I was wondering if any of the rendering code, etc. could use a large performance gain at the cost of a fairly small accuracy loss... |
| 15:20.02 | brlcad | most of what we calculate needs to be really accurate where even double precision is insufficient, but we make it work as best we can because the alternatives (fixed precision, interval arithmetic, etc) are ORDERS of magnitude slower |
| 15:20.05 | *** join/#brlcad kesha__ (~kesha@49.249.17.238) |
| 15:20.25 | andromeda-galaxy | brlcad: okay |
| 15:21.28 | andromeda-galaxy | And I just realized that several of the trig computations in the surf_area computation can be factored out in a way that I think it is fairly unlikely that the compilers automatically do, as it is nested several layers of function calls deep, and it is only a small part of an expression that happens to not be reliant on the innermost loop |
| 15:21.57 | andromeda-galaxy | which is why I was wondering if you thought it might be reasonable to add one more of these performance improvement ones... |
| 15:23.50 | brlcad | if it's not going to give an order of magnitude performance improvement, and it sounds like it's not likely, then it's probably "good enough" for now until we have hard quality metrics to improve upon |
| 15:24.41 | brlcad | it's also not a good idea to guess what the compiler is or is not capable of when it comes to performance |
| 15:24.45 | brlcad | you'll often be surprised |
| 15:24.52 | brlcad | you got to profile |
| 15:25.05 | andromeda-galaxy | brlcad: I did do a profile |
| 15:25.20 | andromeda-galaxy | nearly all of the time is spent in the sin/cos functions as far as I can tell |
| 15:25.24 | brlcad | excellent |
| 15:25.50 | andromeda-galaxy | though the improvement I just submitted makes that a bit better (I think 80-some percent to 60-some) |
| 15:27.49 | brlcad | so then optimizing would mean either 1) improving the performance of sin/cos (not likely, and you tried that), 2) calling sin/cos less (possible, but requires a lot of work to track the impact), or 3) using a different approach that avoids the problem altogether (navel gazing) |
| 15:28.54 | brlcad | you could also leverage data coherence and parallelism, though both are sort of advanced topics to do well |
| 15:29.34 | andromeda-galaxy | brlcad: I was indeed thinking of parallelism; also, I think that the optimization that I was just mentioning would significantly reduce calls to sin/cos |
| 15:33.56 | brlcad | with most of our work, the emphasis is first on getting it implemented not just "good enough" but provably accurate |
| 15:33.59 | maths22 | I will try to fix it then |
| 15:34.14 | maths22 | do you have any suggestions? |
| 15:34.35 | maths22 | (otherwise I can just stash the value in a local variable and then cast it) |
| 15:34.40 | maths22 | that should make GCC happy |
| 15:34.41 | brlcad | since this is already an approximation approach, performance is not really the primary concern -- accuracy is the concern |
| 15:36.05 | brlcad | it doesn't matter if something takes an hour to compute if it's ultimately wrong or has bugs for some cases or has too much error or an indeterminate amount of error |
| 15:36.26 | andromeda-galaxy | brlcad: I see |
| 15:36.35 | brlcad | maths22: stashing may be the way to go for this |
| 15:36.52 | brlcad | the "fix" is to eliminate that pointer trickery altogether |
| 15:39.45 | andromeda-galaxy | brlcad: do you have something specific in mind about trying to test the accuracy more, or should I try to find another task for GCI and then talk to you about it more after gci? |
| 15:55.19 | Notify | 03GCI:Michael * 5332162035318784 Write a wiki page on joining the BRL-CAD project: Ready for review - The work on this task is ready to be reviewed. |
| 15:59.11 | Notify | 03GCI:Andromeda Galaxy * 5803108621877248 Enable a new compiler warning, fix any issues that ensue: Task Claimed - I would like to work on this task. |
| 15:59.52 | *** join/#brlcad sac_microchip (~microchip@223.239.199.15) |
| 16:01.52 | Notify | 03GCI:Mandeep Kaur * 5803108621877248 Enable a new compiler warning, fix any issues that ensue: Task Assigned - This task has been assigned to Andromeda Galaxy. You have 144 hours to complete this... |
| 16:03.13 | maths22 | I will do that now |
| 16:08.15 | Notify | 03GCI:Sean * 5332162035318784 Write a wiki page on joining the BRL-CAD project: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to... |
| 16:10.10 | Notify | 03GCI:Sean * 5332162035318784 Write a wiki page on joining the BRL-CAD project: you didn't change anything? - Michael, it looks like you didn't change anything. Someone added a contact section, but... |
| 16:12.31 | Notify | 03GCI:Michael * 5332162035318784 Write a wiki page on joining the BRL-CAD project: ??? - Can you give me an example of structure? I have a lot of the structure that GNOME has. |
| 16:16.09 | Notify | 03GCI:Melange * 4932878790033408 Fix at least 8 spelling mistakes in at least 8 different files #7: Initial Deadline passed - Melange has detected that the initial deadline has passed and it has set... |
| 16:19.24 | maths22 | done; rebuilding |
| 16:31.11 | Notify | 03GCI:Michael * 5332162035318784 Write a wiki page on joining the BRL-CAD project: Ready for review - The work on this task is ready to be reviewed. |
| 16:31.17 | Notify | 03GCI:Michael * 5332162035318784 Write a wiki page on joining the BRL-CAD project: What else should I do?? - What I am trying to say is that there is no accessibilty page on the BRL-CAD site. That... |
| 16:32.14 | *** part/#brlcad sac_microchip (~microchip@223.239.199.15) |
| 16:32.37 | *** join/#brlcad microchip_sac (~microchip@223.239.199.15) |
| 16:33.10 | microchip_sac | I'm doing GCI task http://www.google-melange.com/gci/task/view/google/gci2013/5240158668455936 |
| 16:33.12 | gcibot | Enable a new compiler warning, fix any issues that ensue #5 |
| 16:33.12 | gcibot | Status: NeedsWork (3 days, 19 hours left) |
| 16:33.12 | gcibot | Mentor(s): Kesha Shah |
| 16:33.43 | microchip_sac | and I'm getting some warnings without the extra flag, which I'm trying to fix |
| 16:33.51 | microchip_sac | (as my mentor said in the comments) |
| 16:34.40 | microchip_sac | I need to fix a warning in src/mged/edsol.c, involving calls to rt_arb_calc_points |
| 16:34.49 | microchip_sac | brlcad: could you help me? |
| 16:35.01 | brlcad | ~ask |
| 16:35.02 | infobot | Questions in the channel should be specific, informative, complete, concise, and on-topic. Don't ask if you can ask a question first. Don't ask if a person is there; just ask what you intended to ask them. Better questions more frequently yield better answers. We are all here voluntarily or against our will. |
| 16:35.11 | brlcad | "yes" |
| 16:35.13 | brlcad | :) |
| 16:35.47 | maths22 | commit 59266 broke build: http://brlcad.org:8085/browse/BRLCAD-BUIL-513/log |
| 16:35.50 | microchip_sac | brlcad: could you tell me how to deal with the pointers to arrays? |
| 16:37.09 | Notify | 03GCI:Ilkin Musaev * 5660495776317440 Create prototype 2D Drawing: Ready for review - The work on this task is ready to be reviewed. |
| 16:40.34 | maths22 | could misc/pastebinit be installed on the server? |
| 16:43.56 | Notify | 03GCI:Jacob B * 5315017800941568 Enable a new compiler warning, fix any issues that ensue #3: Ready for review - The work on this task is ready to be reviewed. |
| 16:47.59 | brlcad | maths22: can pastebinit be configured to anything other than pastebin.com? we can't use that one |
| 16:48.24 | maths22 | yes |
| 16:48.34 | maths22 | reference coming shortly... |
| 16:48.46 | maths22 | alos, what's wrong with pastebin.com |
| 16:49.01 | microchip_sac | brlcad: how do I deal with the pointers to arrays? |
| 16:49.11 | maths22 | see: http://www.moleberry.com/man/p/pastebinit.1.html |
| 16:50.10 | maths22 | ping |
| 16:50.19 | maths22 | oops! |
| 16:50.26 | brlcad | microchip_sac: you need to give me more information than that |
| 16:50.42 | microchip_sac | file src/mged/edsol.c |
| 16:51.00 | microchip_sac | line # 6882, for example |
| 16:51.25 | microchip_sac | the call to rt_arb_calc_points involves es_peqn |
| 16:51.25 | maths22 | microchip_sac: what flag are you using? |
| 16:51.28 | brlcad | maths22: pastebin.com is blacklisted/blocked by many of our corporate contributor environments |
| 16:51.34 | maths22 | that makes sense |
| 16:51.46 | microchip_sac | but es_peqn is not of the correct type |
| 16:51.53 | brlcad | they have too much of a history of hosting malware, cracks, ssns, etc |
| 16:52.05 | microchip_sac | see declaration of rt_arb_calc_points |
| 16:52.19 | microchip_sac | maths22: none, just the default |
| 16:52.45 | maths22 | line 6882 is blank |
| 16:52.57 | maths22 | Are you using the latest svn checkout? |
| 16:53.09 | microchip_sac | oops, sorry, I have local edits |
| 16:53.33 | microchip_sac | just look for rt_arb_calc_points |
| 16:54.02 | maths22 | that makes sense; can you post the build error to a pastebin (like paste.ubuntu.com)? |
| 16:54.27 | Notify | 03BRL-CAD:brlcad * 59267 brlcad/trunk/src/librt/primitives/superell/superell.c: index cannot be used as a variable name due to shadowing, use idx instead |
| 16:55.14 | microchip_sac | maths22: I tried fixing it by declaring a separate array of the right type |
| 16:55.26 | microchip_sac | and then memcpy-ing the array |
| 16:55.47 | microchip_sac | it works, but is it correct? |
| 16:55.59 | brlcad | microchip_sac: what's the problem just declaring it as a pointer to an array? |
| 16:56.07 | maths22 | comitt 59264 also broke build-see http://brlcad.org:8085/browse/BRLCAD-BUIL-511/log |
| 16:56.24 | brlcad | is it still broken? |
| 16:56.53 | microchip_sac | brlcad: rt_arb_calc_points expects (const plane_t *[4]) |
| 16:56.54 | brlcad | running a full build now |
| 16:56.57 | maths22 | compiling right now ... |
| 16:57.19 | brlcad | microchip_sac: that doesn't look like what it takes to me |
| 16:57.29 | brlcad | the function definition is different |
| 16:57.42 | microchip_sac | it takes more than that, that's the part which gives a warning |
| 16:59.05 | microchip_sac | I tried fixing it by |
| 16:59.14 | microchip_sac | <PROTECTED> |
| 16:59.27 | microchip_sac | <PROTECTED> |
| 16:59.34 | brlcad | back up |
| 16:59.36 | brlcad | the declaration must match the definition |
| 16:59.38 | microchip_sac | <PROTECTED> |
| 16:59.39 | brlcad | what is the definition? |
| 17:00.30 | microchip_sac | int rt_arb_calc_points(struct rt_arb_internal *arb, int cgtype, const plane_t planes[6], const struct bn_tol *tol); |
| 17:00.44 | microchip_sac | that's the same for both |
| 17:00.49 | microchip_sac | decl and defn |
| 17:01.02 | brlcad | good |
| 17:01.22 | brlcad | so then that's what makes you saying "brlcad: rt_arb_calc_points expects (const plane_t *[4])" make no sense. :) |
| 17:01.27 | brlcad | it does not expect that |
| 17:01.43 | microchip_sac | gcc says that |
| 17:01.52 | brlcad | it expects "const plane_t planes[6]" which is very different |
| 17:01.54 | microchip_sac | it doesn't make any sense! |
| 17:02.18 | microchip_sac | the '4' was my mistake, should have been '6' |
| 17:02.51 | microchip_sac | ok, I fixed it by the stuff described above |
| 17:03.01 | microchip_sac | is it good practices, though? |
| 17:03.13 | brlcad | problems cannot be debugged/discussed when you have mistakes like that in the discussion :) |
| 17:03.26 | brlcad | programming requires precision 100% of the time |
| 17:04.14 | brlcad | "I tried fixing it by ..." and "I fixed it by the stuff described above" don't make sense |
| 17:04.19 | brlcad | did you fix it or did you not fix it? |
| 17:04.38 | microchip_sac | I fixed it, it builds without errors |
| 17:04.39 | brlcad | Yoda says "Do or Do Not, there is no try" |
| 17:04.45 | microchip_sac | but is it good practices? |
| 17:05.22 | brlcad | what is the type mismatch? |
| 17:05.29 | microchip_sac | I mean, there's a lot of stuff on the Web about the uselessness |
| 17:05.40 | brlcad | it really depends |
| 17:05.48 | microchip_sac | and complications of 'array pointers' |
| 17:05.54 | brlcad | you need to understand how it's being used, what's being used |
| 17:06.09 | brlcad | what is the type mismatch? |
| 17:06.13 | microchip_sac | OK, here goes a precise description: |
| 17:06.27 | Notify | 03BRL-CAD:carlmoore * 59268 (brlcad/trunk/include/ged.h brlcad/trunk/src/libged/brep.c): fix spelling and remove trailing blanks/tabs |
| 17:06.35 | maths22 | still broken: http://brlcad.org:8085/browse/BRLCAD-BUIL-514/log |
| 17:06.49 | microchip_sac | the original variable: fastf_t es_peqn[7][4]; |
| 17:07.23 | microchip_sac | what rt_arb_calc_points expects: struct rt_arb_internal *arb, int cgtype, const plane_t planes[6], const struct bn_tol *tol |
| 17:07.59 | microchip_sac | (I believe plane_t is a type of fastf_t, because it works!) |
| 17:08.42 | microchip_sac | so what I did: const fastf_t es_peqn_arg[7][4]; |
| 17:09.05 | microchip_sac | and then: memcpy(es_peqn_arg, es_peqn, sizeof(es_peqn)); |
| 17:09.21 | microchip_sac | passing es_peqn_arg to rt_arb_calc_points |
| 17:09.51 | microchip_sac | this is made to work by trial and error |
| 17:10.06 | microchip_sac | is it *designed* to work as well? |
| 17:12.12 | microchip_sac | brlcad: precise enough? :) |
| 17:14.32 | maths22 | jenkins is currently broken but using lots of cpu periodically |
| 17:17.57 | brlcad | microchip_sac: much more precise, should have started there with your question ;) |
| 17:18.12 | brlcad | plane_t is an array of fastf_t |
| 17:19.03 | brlcad | you can see the type declaration in include/vmath.h, but it's a fastf_t[4] |
| 17:20.18 | microchip_sac | that's probably where my 'oops-6-and-not-4' came from |
| 17:20.52 | Notify | 03BRL-CAD:brlcad * 59269 brlcad/trunk/src/libbu/tests/bu_date-time.c: some of these constants are too big, make sure they instatiate as the correct type, using long long |
| 17:20.54 | brlcad | so calc points takes 6 of those |
| 17:21.01 | maths22 | brlcad: thanks |
| 17:21.23 | maths22 | we should proxy fisheye through apache |
| 17:21.44 | microchip_sac | calc points takes 6 of fastf_t[4] |
| 17:21.45 | brlcad | which seems like a problem since es_peqn is 7 of them |
| 17:22.10 | brlcad | maths22: you know how to do that? |
| 17:22.36 | brlcad | you don't have access to the apache config, but if you can write down steps to make it happen I can make the necessary edits |
| 17:22.53 | brlcad | unless it can be all done through .htaccess (which I'd doubt) |
| 17:23.09 | maths22 | I will give you a snippet of apache config |
| 17:26.07 | maths22 | brlcad: http://paste.ubuntu.com/6685806/ |
| 17:26.49 | brlcad | http://www.google-melange.com/gci/task/view/google/gci2013/5887726993801216 |
| 17:26.50 | gcibot | Proxy Fisheye interface through Apache |
| 17:26.50 | gcibot | Status: Open |
| 17:26.50 | gcibot | Mentor(s): Sean |
| 17:27.18 | maths22 | I can claim that once you review my compiler flag one |
| 17:27.22 | maths22 | no hurry |
| 17:30.12 | brlcad | added the snippet |
| 17:30.34 | Notify | 03GCI:Shardul Chiplunkar * 5240158668455936 Enable a new compiler warning, fix any issues that ensue #5: Ready for review - The work on this task is ready to be reviewed. |
| 17:30.53 | microchip_sac | brlcad: could you please see ^ |
| 17:31.08 | brlcad | microchip_sac: so what is the 7th? |
| 17:31.17 | brlcad | that's at the heart of the mismatch |
| 17:31.36 | brlcad | (well really the problem is the const, but still the sizes should match) |
| 17:32.37 | brlcad | [Fri Jan 03 12:31:51 2014] [error] [client 71.206.34.125] File does not exist: /usr/web/brlcad.org/static, referer: http://brlcad.org/fisheye/ |
| 17:34.58 | microchip_sac | brlcad: the 7th doesn't make sense, because common sense tells me there are *six* planes |
| 17:35.00 | brlcad | starseeker: don't know if this is of interest, http://thewalters.org/events/eventdetails.aspx?e=2738 |
| 17:35.13 | microchip_sac | and es_peqn keeps track of all of them and an extra |
| 17:35.16 | brlcad | microchip_sac: does the callee use all 7? |
| 17:35.32 | brlcad | figure out what it uses them for |
| 17:35.52 | brlcad | if the 7th is accessed/used, then that might indicate a problem |
| 17:36.03 | brlcad | (which is why it's useful to enable warnings like this, to find problems) |
| 17:36.25 | brlcad | not just an exercise to keep devs busy fighting types ;) |
| 17:37.50 | *** join/#brlcad kesha__ (~kesha@49.248.244.12) |
| 17:38.03 | *** join/#brlcad FreezingCold (~FreezingC@135.0.41.14) |
| 17:38.28 | microchip_sac | brlcad: the callee accesses indexes of es_peqn based on user selections from a menu |
| 17:38.36 | microchip_sac | (or so I think) |
| 17:40.30 | microchip_sac | OK, not I think, but I see -- a comment specifically says es_peqn[something] = plane of interest from es_menu |
| 17:43.28 | Notify | 03GCI:Rishi Sharma * 5822710852616192 Create a New Year Greeting Card for BRL-CAD.: Ready for review - The work on this task is ready to be reviewed. |
| 17:44.47 | microchip_sac | brlcad: got it! |
| 17:45.16 | microchip_sac | if es_peqn[7] ever is accessed, it means that |
| 17:45.31 | microchip_sac | the user has selected the 'go back to main menu' option |
| 17:46.28 | microchip_sac | I don't see why they needed an extra indice for that, though; probably to avoid es_peqn[es_menu] giving an error |
| 17:47.22 | microchip_sac | could you review http://www.google-melange.com/gci/task/view/google/gci2013/5240158668455936 now? |
| 17:47.24 | gcibot | Enable a new compiler warning, fix any issues that ensue #5 |
| 17:47.25 | gcibot | Status: NeedsReview (3 days, 18 hours left) |
| 17:47.25 | gcibot | Mentor(s): Kesha Shah |
| 17:47.32 | microchip_sac | I think the patch is all right |
| 17:48.12 | microchip_sac | except for the es_peqn issue, which I don't think will cause trouble |
| 17:48.35 | microchip_sac | the seventh index quits the program, I guess |
| 17:50.50 | microchip_sac | brlcad: nope, it *does* quit for the seventh index |
| 17:54.35 | Notify | 03GCI:Toshita * 5269834744987648 Design a cover image or banner for our Facebook page (and/or another social media site) #13: Ready for review - The work on this task is ready to be reviewed. |
| 17:55.51 | microchip_sac | brlcad? |
| 18:00.23 | brlcad | much better understanding |
| 18:00.42 | brlcad | the task will get reviewed in the next round of reviews, asap |
| 18:00.56 | microchip_sac | is it correct, however? :) |
| 18:01.01 | brlcad | you can get started on another task in the meantime or double-check your work to make sure there are no problems |
| 18:01.10 | brlcad | is it? :) |
| 18:01.19 | microchip_sac | I think it is |
| 18:01.37 | Notify | 03GCI:Johannes Schulte * 5901237887172608 Design new API function to reduce duplication #3: Task Claimed - I would like to work on this task. |
| 18:01.39 | microchip_sac | but of course, I'm thinking about my own work |
| 18:01.47 | microchip_sac | :) |
| 18:02.45 | brlcad | I'd probably look into making it not have a 7th element myself, having an off-by-one array is just asking for problems |
| 18:03.05 | brlcad | having to copy the array is correct, but a hack |
| 18:03.11 | brlcad | a hack because of a preceding hack |
| 18:03.15 | brlcad | better to remove all the hacks :) |
| 18:03.36 | microchip_sac | if the seventh element is *about to* be accessed then the program quits |
| 18:03.54 | microchip_sac | we better write that down somewhere :) |
| 18:04.15 | microchip_sac | because of a switch just before the actual access |
| 18:05.03 | Notify | 03GCI:Mandeep Kaur * 5901237887172608 Design new API function to reduce duplication #3: Task Assigned - This task has been assigned to Johannes Schulte. You have 72 hours to complete this task, good... |
| 18:14.23 | Notify | 03GCI:Mandeep Kaur * 5269834744987648 Design a cover image or banner for our Facebook page (and/or another social media site) #13: Needs Improvement - You have to be more creative. Have a look at... |
| 18:14.43 | Notify | 03GCI:Mandeep Kaur * 5269834744987648 Design a cover image or banner for our Facebook page (and/or another social media site) #13: Task Needs More Work - One of the mentors has sent this task back... |
| 18:33.03 | maths22 | brlcad: fisheye is now running at http://brlcad.org/fisheye/ |
| 18:47.42 | Notify | 03GCI:Johannes Schulte * 5901237887172608 Design new API function to reduce duplication #3: Ready for review - The work on this task is ready to be reviewed. |
| 18:51.40 | *** join/#brlcad jschulte (~johannes@p4FDFB4C6.dip0.t-ipconnect.de) |
| 18:51.53 | Notify | 03GCI:Johannes Schulte * 5901237887172608 Design new API function to reduce duplication #3 http://www.google-melange.com/gci/task/view/google/gci2013/5901237887172608: None I did implementation... |
| 19:11.14 | Notify | 03GCI:Armen * 6501205291302912 Fix at least 8 spelling mistakes in at least 8 different files: Task Claimed - I would like to work on this task. |
| 19:12.34 | Notify | 03GCI:Mandeep Kaur * 6501205291302912 Fix at least 8 spelling mistakes in at least 8 different files: Task Assigned - This task has been assigned to Armen. You have 72 hours to complete this task,... |
| 19:34.02 | Notify | 03GCI:kenneth dela harlley * 5232363101487104 Post and promote typography video: Ready for review - The work on this task is ready to be reviewed. |
| 19:36.15 | *** join/#brlcad Ch3ck (~Ch3ck@195.24.220.16) |
| 20:04.38 | *** join/#brlcad Ch3ck (~Ch3ck@195.24.220.16) |
| 20:14.30 | maths22 | brlcad: change the last line from ProxyPass /fisheye http://brlcad.org:8060/fisheye |
| 20:14.41 | maths22 | to ProxyPass /fisheye http://localhost:8060/fisheye |
| 20:28.57 | starseeker | brlcad: cool! |
| 20:36.28 | starseeker | brlcad: this sounds like it might be up your alley: https://www.eventbrite.com/e/art-bytes-at-the-walters-tickets-9534980383 |
| 21:04.37 | Notify | 03GCI:Michael * 5332162035318784 Write a wiki page on joining the BRL-CAD project: None - Does it look good?? |
| 21:15.33 | Notify | 03GCI:Sean * 5660495776317440 Create prototype 2D Drawing: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the... |
| 21:23.39 | Notify | 03GCI:Sean * 5660495776317440 Create prototype 2D Drawing: branding and example - Ilkin, this is getting a little better but I don't think there's enough time to achieve the task objectives at this... |
| 21:38.01 | Notify | 03GCI:Toshita * 5269834744987648 Design a cover image or banner for our Facebook page (and/or another social media site) #13: Additions - I have added in some features to the cover and I am working... |
| 21:50.38 | Notify | 03GCI:Sean * 5332162035318784 Write a wiki page on joining the BRL-CAD project: don't understand - There are three examples in the references section including the gnome, ubuntu, and freebsd pages.... |
| 21:50.43 | Notify | 03GCI:Sean * 5332162035318784 Write a wiki page on joining the BRL-CAD project: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to... |
| 22:03.54 | Notify | 03GCI:Sean * 5822710852616192 Create a New Year Greeting Card for BRL-CAD.: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this... |
| 22:03.55 | Notify | 03GCI:Sean * 5822710852616192 Create a New Year Greeting Card for BRL-CAD.: cite your sources - Rishi, this still doesn't look like a card design we could use. It looks like you searched the web... |
| 22:19.54 | Notify | 03GCI:Sean * 5901237887172608 Design new API function to reduce duplication #3: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to... |
| 22:19.55 | Notify | 03GCI:Sean * 5901237887172608 Design new API function to reduce duplication #3: not digging it - Johannes, this doesn't feel like a good API addition as-is. The new function fails to stand on it's... |
| 22:20.29 | Notify | 03GCI:Sean * 5232363101487104 Post and promote typography video: Task Needs More Work - One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to... |
| 22:21.49 | Notify | 03GCI:Sean * 5232363101487104 Post and promote typography video: Erm... title?? - That's not much of a Youtube title and there's no description whatsoever. That's not very helpful. It needs to say... |
| 22:32.36 | Notify | 03GCI:Michael * 5332162035318784 Write a wiki page on joining the BRL-CAD project: Ready for review - The work on this task is ready to be reviewed. |
| 22:36.31 | Notify | 03GCI:kenneth dela harlley * 5232363101487104 Post and promote typography video: Ready for review - The work on this task is ready to be reviewed. |
| 22:45.04 | Notify | 03GCI:fernozzle * 5034143381454848 Compile BRL-CAD on Windows using Cygwin: Claim Removed - The claim on this task has been removed, someone else can claim it now. |
| 23:03.13 | Notify | 03BRL-CAD:j-schulte * 59270 (brlcad/trunk/src/librt/primitives/arbn/arbn.c brlcad/trunk/src/librt/primitives/table.c): Add volume function for arbn to librt |
| 23:04.18 | Notify | 03GCI:Johannes Schulte * 5901237887172608 Design new API function to reduce duplication #3: Ready for review - The work on this task is ready to be reviewed. |
| 23:05.38 | Notify | 03GCI:Johannes Schulte * 5901237887172608 Design new API function to reduce duplication #3: None - As you may have seen, I implemented a volume function for arbn, so when this task is finished, a... |