| 01:07.52 | Notify | 03GCI:javamonn * 8131203 Compile with -Wstrict-prototypes, fix warnings that ensue: Ready for review - The work on this task is ready to be reviewed. |
| 01:14.37 | Notify | 03GCI:javamonn * 8131203 Compile with -Wstrict-prototypes, fix warnings that ensue: Removed that line - I removed the line from the patch that was causing the problem. It's still an old style... |
| 03:07.59 | Notify | 03GCI:Sean * 8131203 Compile with -Wstrict-prototypes, fix warnings that ensue: Task Closed - Congratulations, this task has been completed successfully. |
| 03:10.38 | brlcad | caen23: your task is the last remaining open |
| 03:41.37 | *** join/#brlcad phoenixyjll (7b7e325f@gateway/web/freenode/ip.123.126.50.95) |
| 03:45.15 | *** join/#brlcad abetusk (~abetusk@cpe-24-58-232-122.twcny.res.rr.com) |
| 04:26.10 | *** join/#brlcad EricPoehlsen (~Eric@dslb-084-056-074-118.pools.arcor-ip.net) |
| 06:47.12 | caen23 | brlcad: i'm sorry, but i haven't managed to get it done properly. i can merge history, but i cannot get it to recognize they are the same files. i was thinking of merging the history with git, then merging the files outside of git (with patch), but i think it's an ugly hack |
| 07:30.27 | *** join/#brlcad d_rossberg (~rossberg@66-118-151-70.static.sagonet.net) |
| 09:29.12 | *** join/#brlcad Al_Da_Best (~Al_Da_Bes@cpc2-shep12-2-0-cust21.8-3.cable.virginmedia.com) |
| 11:08.47 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.165.6) |
| 11:32.56 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.104.117) |
| 11:51.18 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.104.117) |
| 12:11.21 | *** join/#brlcad Skriptkid_ (~Skriptkid@117.202.104.117) |
| 13:16.14 | *** join/#brlcad EricPoehlsen (~Eric@ip-109-84-147-17.web.vodafone.de) |
| 13:32.30 | *** join/#brlcad tujli (5bc6aec9@gateway/web/freenode/ip.91.198.174.201) |
| 13:39.19 | maths22 | brlcad: I'm wondering what still has to happen on crit for it to become the webserver. |
| 13:46.07 | tujli | I modeled my part with BRLCAD but the manufacturer says they want a 2d drawing |
| 13:46.26 | tujli | how can I get it? |
| 14:18.24 | brlcad | maths22: good question, mainly a file sync and one final database sync |
| 14:18.59 | brlcad | tujli: couple ways but know that 2d drawings are not yet our forte |
| 14:19.23 | brlcad | tujli: you can run the rtedge command and it'll output a hidden-line rendering for a specified view |
| 14:19.55 | brlcad | it's trivial to generate drawings for each primary view (top, front, left, 35/25), and they'll want that |
| 14:20.32 | brlcad | the problem is that they'll also want dimension information which we don't yet add to the drawings for you |
| 14:20.44 | brlcad | you'll have to add your annotations and dimensions manually |
| 14:21.10 | brlcad | which is honestly done most easily within an image editor |
| 14:22.41 | brlcad | rtege will give you a rendering like this http://brlcad.org/gallery/s/renderings/havoc_rtedge.png.html (35/25 view) |
| 14:23.57 | brlcad | caen23: can you write up what all you tried? |
| 14:24.28 | brlcad | how can you merge history if you cannot get it to recognize they are the same files? |
| 14:25.11 | brlcad | task-wise, the research on a solution is enough |
| 14:26.00 | brlcad | usefulness-wise, even a horrible horrible hack that gets the job done will be awesome because right now the only solution is manually merging and losing the history |
| 14:26.23 | caen23 | brlcad: i can create a new (parent) repository and add the other two repositories to it, preserving history. so if repoA had 3 commits, and repoB had 4, this parent repository would have 7 commits logged |
| 14:27.14 | brlcad | ah, but that wouldn't necessarily preserve the different authors |
| 14:27.45 | caen23 | why not? |
| 14:28.13 | brlcad | hm, how are you adding the two repos? |
| 14:29.08 | caen23 | using something called "subtree merge" in git. the log would keep the original authors for each commit, not mention the merger as the author of all commits, if that's your concern |
| 14:30.24 | brlcad | so then is the only problem that it needs two subtrees, because even a merge of the src subdirectory would be right |
| 14:31.40 | brlcad | I guess what's needed is to see the actual steps with some comments |
| 14:32.08 | caen23 | ok, i can write that |
| 14:33.04 | brlcad | if it can work with our svn repo and the github repo as the data starting point, not abstracted, even better.. :) |
| 14:35.00 | caen23 | i tried running svn2git on the whole repo, but i got an error around r18000, and i wasn't able to finish the conversion. but i didn't try running it on src/step specifically, i could give that a try |
| 14:35.40 | brlcad | so something to try later, for the task just write up what you did |
| 14:35.53 | caen23 | ok |
| 14:35.54 | brlcad | deadline is just in a couple hours I think |
| 14:36.50 | caen23 | 5, i see. i can get it done |
| 14:45.29 | Notify | 03BRL-CAD:bob1961 * 54175 brlcad/trunk/src/tclscripts/archer/SketchEditFrame.tcl: More tweaks for Archer's sketch editor. Update the handle_configure method to redraw the grid after receiving a window configure event. Whether we're in detail mode or not, the segments need to be created in the canvas. |
| 14:46.58 | maths22 | brlcad: the db sync might be difficult for the website, as the two servers are running different versions of the software: changes since I upgraded the software on crit might need to be ported manually. |
| 14:50.13 | tujli | brlcad, any manual about rtedge (is it a command in mged, or a standalone program)? |
| 14:51.10 | brlcad | caen23: that's our limit on the task, I don't think that's GCI's limit |
| 14:51.15 | tujli | I can't get hidden lines and faces parallel to my eyesight displayed |
| 14:51.29 | brlcad | if it's 24 hours after gci close, then it's like two hours from now |
| 14:52.37 | brlcad | maths22: so one specific problem is that the site on crit is missing several modules that have been in place on .bz for quite some time |
| 14:52.44 | brlcad | spam measures in particular |
| 14:53.04 | brlcad | the db on crit is utterly flooded with spam (dozens a day) |
| 14:53.22 | brlcad | so they need to be purged (not manually deleted) |
| 14:53.33 | brlcad | easiest way to do that is to drop the database and re-import/re-upgrade |
| 14:53.55 | brlcad | tujli: it's a standalone program but it's also a command in mged |
| 14:54.00 | brlcad | there is a man page |
| 14:54.14 | brlcad | if you've set your MANPATH correctly, just man rtedge |
| 14:54.24 | brlcad | or running brlman rtedge if you've only set your PATH |
| 14:55.16 | brlcad | tujli: I'm not sure what you mean about faces parallel to your eyesight |
| 14:56.17 | *** join/#brlcad Guest36160 (~abetusk@cpe-24-58-232-122.twcny.res.rr.com) |
| 14:57.05 | caen23 | brlcad: ugh, it seems i can no longer upload work at all |
| 14:57.22 | caen23 | but i can put the files somewhere and give you the link |
| 14:57.24 | brlcad | caen23: try to mark it closed |
| 14:57.40 | caen23 | i can't without uploading any work |
| 14:59.20 | tujli | brlcad: I see nothing about face z=0, 0<x,y<1 when looking from x-axis direction |
| 14:59.54 | tujli | it should be a line from y=0,z=0 to y=1,z=0 |
| 15:00.55 | maths22 | brlcad: is the wiki or the drupal page getting spammed? |
| 15:01.07 | maths22 | I can fix that once I know what is broken. |
| 15:01.27 | brlcad | that description does nothing to help me help you :) |
| 15:01.30 | brlcad | maths22: wiki |
| 15:01.39 | maths22 | True. |
| 15:01.43 | brlcad | see http://crit.brlcad.org/wiki/Special:RecentChanges |
| 15:02.09 | maths22 | the wiki is much easier to upgrade than the drupal site |
| 15:02.42 | brlcad | the last 500 changes spans all of 2 days |
| 15:03.08 | brlcad | there are several measures in place on the old wiki that have been effective |
| 15:03.15 | brlcad | all of them are apparently needed |
| 15:03.36 | brlcad | i have a half dozen to clean up in my queue |
| 15:03.45 | brlcad | but that's over the past two weeks |
| 15:03.50 | maths22 | I don't know what happened to the modules, but I will reupdate the site today. |
| 15:06.30 | maths22 | brlcad: can I have permissions to edit the w directory on crit. Some of the files are locked against my editing. |
| 15:07.18 | maths22 | Also, the images directory in w2 |
| 15:14.38 | brlcad | caen23: try uploading a link to our repo or the github repo, just to see if it's even closable |
| 15:15.24 | caen23 | i tried, links don't work either |
| 15:15.44 | brlcad | maths22: sure, give me a few minutse -- that's another issue raised, that there's a w2 directory and a stale out of sync w directory |
| 15:15.52 | brlcad | without a file sync, uploaded files are missing |
| 15:16.00 | brlcad | caen23: ahhh, so maybe too late already |
| 15:16.15 | caen23 | i think it is, unfortunately |
| 15:20.22 | *** join/#brlcad Al_Da_Best (~Al_Da_Bes@cpc2-shep12-2-0-cust21.8-3.cable.virginmedia.com) |
| 15:20.38 | maths22 | I only currently use the w2 directory (last time I could not fix the w directory, so I copied it to a new directory) |
| 15:20.52 | maths22 | I will resync the files to the w directory once it is deleted. |
| 15:21.12 | brlcad | caen23: what error do you get when you try to upload? |
| 15:22.28 | maths22 | until then, I will run it out of the w3 directory |
| 15:24.51 | brlcad | dude, just a few minutes :) |
| 15:25.04 | brlcad | you should be able to do it now |
| 15:25.13 | maths22 | That is fine. I just have time now, so I am doing the work now and can change the path later |
| 15:25.14 | brlcad | via sudo |
| 15:25.22 | maths22 | thanks |
| 15:25.28 | brlcad | what's the user/group? |
| 15:25.46 | brlcad | i haven't changed anything yet, that's the config that should be in place |
| 15:25.57 | brlcad | I need a few minutes to switch contexts, log in, and verify |
| 15:26.16 | brlcad | but sudo -u www is the usual way all web file editing should be occuring |
| 15:26.24 | brlcad | there could be some deviations that need fixing |
| 15:26.51 | maths22 | ok |
| 15:27.45 | maths22 | I am "not in the sudoers file" |
| 15:28.21 | brlcad | you did -u ? |
| 15:28.30 | maths22 | i did |
| 15:28.43 | brlcad | then couple minutes :) |
| 15:32.11 | caen23 | brlcad: "All work on tasks has stopped. You can no longer place comments, submit work or make any changes to existing tasks." |
| 15:32.44 | maths22 | no hurry |
| 15:33.24 | brlcad | ahh, looks like crit hasn't had the sudoers configuration migrated |
| 15:33.25 | brlcad | fixes |
| 15:36.30 | maths22 | thanks. |
| 15:39.42 | maths22 | <PROTECTED> |
| 15:39.42 | brlcad | maths22: there, that should do it |
| 15:39.50 | maths22 | thank you |
| 15:39.55 | brlcad | note that your mask is wrong for web root work |
| 15:40.11 | brlcad | umask 002 |
| 15:40.14 | maths22 | what does that mean? |
| 15:40.26 | brlcad | the permissions are wrong on the w2 and w3 folders that you made |
| 15:40.40 | maths22 | that is fine. I will delete them |
| 15:41.00 | brlcad | it'll be the same for any other files you create too |
| 15:41.06 | brlcad | so you'll have to keep an eye on that |
| 15:41.10 | brlcad | or set your mask |
| 15:41.32 | brlcad | files should be user and group readable/writeable and usually world readable |
| 15:41.58 | brlcad | numerically, files are usually 664 and directories are 775 |
| 15:42.19 | maths22 | what should my mask be? |
| 15:42.24 | brlcad | and you copy/edit/move everything as sudo -u www |
| 15:42.27 | brlcad | 002 |
| 15:42.37 | maths22 | ok. thanks. |
| 15:42.45 | brlcad | np, thx too |
| 15:43.00 | brlcad | that's set up that way so we can all edit the files |
| 15:43.12 | brlcad | without needing a sysadmin to jump in and fix things all the time |
| 15:43.24 | brlcad | and without granting everyone root access (bad) |
| 15:44.11 | maths22 | that makes sense |
| 15:45.14 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.104.117) |
| 15:47.22 | maths22 | root seems to own some of the files in w2 |
| 15:50.51 | brlcad | fixed -- that was a quick-fix I did a week or so ago to fix the wiki images |
| 15:51.09 | brlcad | (they were all missing, not synced) |
| 15:51.42 | maths22 | thanks |
| 15:58.33 | maths22 | I somehow do not have read permissions on the w folder (only w and x) |
| 16:01.06 | tujli | brlcad: well any advice for my question? |
| 16:03.02 | tujli | I was asking, that I see nothing about face z=0, 0<x,y<1 when rtedge from x-axis direction |
| 16:04.13 | maths22 | never mind. I fiexd it myself |
| 16:05.45 | brlcad | tujli: I reponded -- I don't understand what that means |
| 16:07.19 | brlcad | tujli: sounds like some face "on the ground", but that range seems somewhat useless for understanding the problem |
| 16:07.51 | brlcad | you're looking down the X axis and can't see a face in the xy-plane? |
| 16:08.35 | brlcad | faces aren't line-rendered in isolation, it depends on their neighboring geometry |
| 16:12.34 | tujli | brlcad: http://imagebin.org/242997 was rendered from default view, and http://imagebin.org/242998 from -a0 -A0 -e0 |
| 16:13.22 | tujli | looks like some edges are missing in the second (-a0 -A0 -e0) image |
| 16:13.30 | starseeker | gets his hopes up again that a PPI race may begin for desktop monitors: http://www.pcworld.com/article/261738/up_close_with_sharps_stunning_igzo_display_technology.html |
| 16:20.01 | brlcad | tujli: aha, I see what you mean now |
| 16:20.12 | brlcad | that looks like depth feature culling -- what's the size of that view? |
| 16:20.53 | tujli | brlcad: 800 |
| 16:23.05 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.104.117) |
| 16:24.38 | brlcad | tujli: units? :) |
| 16:24.41 | brlcad | mm ? |
| 16:25.15 | brlcad | i meant the geometric size, not the pixel size, btw |
| 16:25.53 | brlcad | it'll be at the bottom of your mged command window |
| 16:26.23 | brlcad | here, doesn't matter, lets just set the depth really really small so you get all features |
| 16:26.50 | tujli | ah |
| 16:26.51 | brlcad | -c "set max_dist=0.001" |
| 16:26.59 | tujli | 3.5mm iirc |
| 16:27.11 | brlcad | oooh, yeah ... that's itty bitty |
| 16:27.42 | brlcad | it's fine, but you just need to set the distance |
| 16:27.53 | tujli | nice it works for me now |
| 16:28.05 | brlcad | great! |
| 16:28.05 | tujli | btw how can I render hidden lines? |
| 16:28.25 | brlcad | you mean like the wireframe? |
| 16:28.33 | brlcad | you can save the wireframe itself |
| 16:30.06 | brlcad | File -> Render View, plot or postscript should do the trick |
| 16:30.11 | tujli | brlcad: no it won't work in this way |
| 16:30.57 | tujli | sometimes I write A - B where B is very large |
| 16:31.18 | brlcad | tujli: just so you know, we've been working on major infrastructure changes to make all this MUCH easier, but it's a ton of work to get it all in place so it's taking some time |
| 16:31.20 | tujli | I only want to see boundary of B at sections where it intersects with A |
| 16:32.13 | brlcad | so still a wireframe, but without the "negative" objects |
| 16:32.53 | tujli | so then? |
| 16:34.16 | brlcad | that's actually exactly what our new infrastructure supports, but I'm not sure it's currently possible honestly |
| 16:34.48 | brlcad | you could run the "E" command to see a polygonal version evaluated |
| 16:35.09 | brlcad | but then you're going to get more than the intersection edges, you'll get all the faces |
| 16:35.17 | tujli | brlcad: in mged? |
| 16:35.19 | brlcad | yes |
| 16:36.53 | *** join/#brlcad EricPoehlsen (~Eric@dslb-084-056-092-231.pools.arcor-ip.net) |
| 16:37.31 | brlcad | hm, actually for a simple test, that actually seems to work |
| 16:37.43 | brlcad | for flat polygonal faces |
| 16:39.24 | tujli | brlcad: looks better than the default wireframe view, but I still need to erase some lines (with an image editor?) to get what I want |
| 16:39.36 | brlcad | around the holes? |
| 16:40.06 | brlcad | can you show me? |
| 16:41.13 | brlcad | might be simpler to turn the holes off, capture wireframe with E, then merge with an rtedge rendering |
| 16:41.34 | brlcad | pain in the ass, but should work |
| 16:41.47 | brlcad | and simpler than deleting lines with an image editor |
| 16:42.56 | tujli | brlcad: in A.s rpp 0 20 0 20 0 20 |
| 16:43.02 | tujli | in B.s rpp 10 30 10 30 0 20 |
| 16:43.09 | tujli | r C.r u A.s - B.s |
| 16:43.14 | tujli | E C.r |
| 16:43.24 | tujli | view from Top |
| 16:43.39 | tujli | expected: an L-shaped thing |
| 16:45.06 | brlcad | aha, that one is easy |
| 16:45.09 | brlcad | it's a tolerancing issue |
| 16:45.52 | brlcad | you subtract B.s from A.s but they share two faces exactly |
| 16:45.59 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.104.117) |
| 16:46.59 | brlcad | in B.s rpp 10 30 10 30 -0.1 20.1 |
| 16:49.34 | tujli | then the whole boundary of B (a square at 10,10 ~ 30,30) appears instead |
| 16:50.55 | brlcad | run "who"? |
| 16:51.11 | brlcad | make sure you're only displaying C.r |
| 16:51.20 | brlcad | B C.r ; E C.r |
| 16:51.40 | tujli | ok got the correct now :) |
| 16:51.47 | tujli | but this looks so hacky |
| 16:52.06 | brlcad | agreed |
| 16:52.08 | tujli | and difficult to do on an existing model |
| 16:52.12 | brlcad | like I said, I didn't even think it was possible |
| 16:52.59 | brlcad | you'd need to make those tolerance corrections to properly export the model as well |
| 16:53.20 | brlcad | the ray trace render evaluation is a lot more robust, that's why it looks okay via rt/rtedge |
| 16:53.49 | brlcad | but E and the exporters are a lot more sensistive to tolerancing, you have to nudge your subtractions so they do not coincide |
| 16:54.00 | brlcad | the boundary is undefined |
| 16:54.15 | ``Erik | I don't think any etc files were migrated to crit, so many packages had such significant updates, it woulda caused more harm than good, iirc |
| 16:55.24 | ``Erik | "sudo su"? O.o |
| 16:55.40 | tujli | brlcad: so I guess the only thing I can do now is to wait? |
| 16:59.07 | tujli | btw is there a good software you would recommend, with which I can get a 2d draft from an exported format of brlcad? |
| 16:59.28 | brlcad | tujli: options seem to be to either wait, edit the lines manually in an image editor, fix the coinciding faces so you can use the E command (which is actually a bit easier than it seems), or export the model into another CAD system that will handle the 2D drawing better (complex path) |
| 17:00.25 | brlcad | there actually is not any that I would recommend -- even the commercial systems deal with import/drawing very poorly |
| 17:01.57 | ``Erik | tujli: best bet is probably to rtedge a huge render and fix it up in inkscape or gimp :/ |
| 17:03.40 | tujli | ``Erik: the main barrier is that it doesn't show hidden edges |
| 17:07.27 | ``Erik | what if you facetized the regions and saved the plots of the facetized version? if you're code savvy, rtedge could be modified with some firsthit data to try to draw a stipled line for the hidden edges, but that'd be a bit of C fu |
| 17:14.45 | tujli | ``Erik: and have them overlapped each other? |
| 17:14.48 | tujli | I've never looked into brlcad code |
| 17:16.13 | ``Erik | overlapping regions is a semantic error |
| 17:21.26 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.104.117) |
| 17:26.45 | brlcad | it actually shouldn't be very hard at all to get rtedge to show hidden edges... |
| 17:27.05 | brlcad | tujli: if you can wait a couple days, I can give that a try on Thursday |
| 17:28.34 | Notify | 03BRL-CAD:bob1961 * 54176 (brlcad/trunk/src/tclscripts/archer/Archer.tcl brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl): Minor tweak to restore the graphical display after deleting the currently selected sketch. |
| 17:28.58 | brlcad | it has all the machinery, might not be too hard |
| 17:29.05 | Notify | 03BRL-CAD:brlcad * 54177 brlcad/trunk/TODO: add option to have rtedge also show interior/back-facing edges |
| 17:29.58 | tujli | ``Erik: i didn't really understand what you said. |
| 17:30.31 | tujli | i mean "what if you facetized the regions and saved the plots of the facetized version?" |
| 17:31.18 | tujli | brlcad: in what timezone :p |
| 17:31.32 | tujli | it's already Wednesday here now |
| 17:47.38 | Notify | 03BRL-CAD:starseeker * 54178 brlcad/trunk/src/librt/test_botpatches.cpp: Try to push the surface edges away from the trimming curves, to avoid uv pullback failures. |
| 17:59.45 | brlcad | tujli: so "a couple days", however you want to take that |
| 18:00.03 | brlcad | no promise that it'll work, but I'll gladly try if it'll be of use to use |
| 18:00.17 | brlcad | I just can't work on it right this moment |
| 18:15.04 | caen23 | brlcad: i was thinking of setting up buildbot on crit, where would you like me to place the master (sorry, not used to working on servers)? |
| 18:16.03 | Notify | 03BRL-CAD:bob1961 * 54179 brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: Fixed a few issues related to primitive labels not being drawn. |
| 18:26.42 | tujli | brlcad: that's ok. thx anyway |
| 18:29.22 | tujli | brlcad: better to have interior edges have a different linestyle, or color |
| 18:34.31 | maths22 | brlcad: I updated it with the newest version |
| 19:24.04 | brlcad | caen23: talked to google and it was too late yesterday even |
| 19:24.38 | brlcad | I was a little confused because we were able to approve one after the deadline .. apparently they opened up the system for 15 minutes, just enough time for another student to submit and us to accept |
| 19:25.35 | brlcad | you can just share what you found on the brlcad-devel list instead, since that really is a high-priority hot topic I'd like to get closure on |
| 19:28.34 | caen23 | okay |
| 19:32.49 | brlcad | tujli: now you're just getting needy |
| 19:32.53 | brlcad | ;) |
| 19:33.30 | brlcad | hm, colors might be doable ... linestyle will have to wait for the new infrastructure, though |
| 19:35.58 | tujli | brlcad: anyway without color doable, I can generate two images, one with hidden edges and the other without them, using different color |
| 19:36.11 | tujli | then put the second one over the first one |
| 19:36.25 | brlcad | maths22: Warning: Missing argument 3 for makeBlock(), called in /usr/web/brlcad.org/skin2/page.tpl.php on line 179 and defined in /usr/web/brlcad.org/skin2/page.tpl.php on line 40 |
| 19:37.31 | brlcad | tujli: technically you can do that now too .. rtedge front + rtedge back (diff color), mirror back image, and composite together |
| 19:37.59 | *** join/#brlcad EricPoehlsen (~Eric@ip-109-84-44-247.web.vodafone.de) |
| 19:38.16 | brlcad | that'd be neat to experiment with in a script.. |
| 19:38.47 | tujli | brlcad: nope. my model has a hole from top to bottom |
| 19:39.44 | tujli | so it can't be seen from either side |
| 19:39.53 | brlcad | ah, so you need an *interior* edge |
| 19:39.58 | brlcad | good to know |
| 19:40.44 | brlcad | any value distinguishing between front, interior, and rear with three colors? |
| 19:41.05 | brlcad | or just front and not-front |
| 19:41.45 | tujli | the second is enough for me but the first might look reasonable |
| 19:42.12 | brlcad | maths22: that warning is on the mediawiki page (recent changes) .. which makes me wonder why if page.tpl.php is from mw or ours? |
| 19:43.45 | brlcad | why does the recent changes page suck so badly.. 500 changes in last 30 days and it stops at 3 JAN |
| 19:44.29 | caen23 | brlcad: i tried posting to the mailing list, but it seems i am not allowed to |
| 19:44.41 | brlcad | caen23: if you're subscribed, you're allowed to |
| 19:46.07 | brlcad | mail is supposed to come from the subscribed email address |
| 19:46.24 | tujli | brlcad: what's your $wgRCMaxAge value? |
| 19:46.37 | caen23 | this seems right. do i need to prefix the header with anything? |
| 19:46.45 | brlcad | nope |
| 19:47.24 | caen23 | hmm… actually, it could be because i am subscribed with mail@gmail.com, but the mail is sent from mail@googlemail.com |
| 19:47.35 | brlcad | tujli: whatever the default is, apparently |
| 19:47.45 | brlcad | caen23: that would be why |
| 19:48.20 | brlcad | list has no way of knowing that google makes those one in the same |
| 19:48.43 | tujli | brlcad: so it should be 7 days... per https://www.mediawiki.org/wiki/Manual:$wgRCMaxAge and I see your mediawiki version 1.11.0 |
| 19:48.57 | caen23 | makes sense, i guess i was hoping google would take care of it |
| 20:06.15 | brlcad | tujli: that's a good find, thanks! |
| 20:06.41 | brlcad | the site it was migrated to is the latest, but assumedly the 1.11 database has already purged the old changes |
| 20:09.58 | caen23 | brlcad: the mail is posted, and i wanted to setup buildbot on crit. where would you like the master to be located? |
| 20:12.28 | brlcad | sets it to 6 months, rebuilds recent changes, yay! |
| 20:13.58 | brlcad | caen23: it is/was setup in skriptkid's public_html folder |
| 20:14.14 | brlcad | it'd be nice to have it use a system-installed service like how jenkins was set up |
| 20:14.41 | brlcad | caen23: before you go down that road, we should probably decide which to use so you don't waste effort though |
| 20:16.59 | brlcad | i'm torn, I like the jenkins interface more, but like buildbot configurability/scriptability more (and simplicity of setup) |
| 20:17.18 | brlcad | out of the box, jenkins was definitely slightly more friendly |
| 20:22.30 | caen23 | i like buildbot for being easier to modify, too. it's python, it's got a nice community around it, and a lot of people seem to use it, including webkit, llvm and i think mozilla. i actually made a small contribution to it myself :) but jenkins definitely looks nicer, although this should be doable with buildbot and some html, too |
| 20:24.46 | caen23 | did you see this? http://trac.buildbot.net/wiki/SuccessStories |
| 20:25.05 | *** join/#brlcad andrei_ (~andrei@188.25.162.155) |
| 20:52.53 | *** join/#brlcad EricPoehlsen (~Eric@ip-77-25-12-7.web.vodafone.de) |
| 20:55.19 | *** join/#brlcad EricPoehlsen (~Eric@ip-77-25-12-7.web.vodafone.de) |
| 21:10.07 | maths22 | page.tpl.php is ours. I will fix it. |
| 21:10.26 | maths22 | except... |
| 21:10.30 | maths22 | it works now |
| 21:10.44 | maths22 | I don't know why it was not working. |
| 21:25.02 | brlcad | maths22: I still get the error |
| 21:25.05 | brlcad | http://crit.brlcad.org/wiki/Special:RecentChanges |
| 21:25.26 | brlcad | it's half underneath the image/menu header |
| 21:32.08 | maths22 | I do not see it. this is what I see: http://grab.by/j2B4 |
| 21:34.56 | caen23 | maybe you need an account? |
| 21:38.59 | maths22 | I also get the error when logged in. |
| 21:39.54 | caen23 | so you should be able to fix it now |
| 21:58.17 | maths22 | I meant to say I don't get the error when logged in. |
| 21:58.28 | maths22 | The problem with talking to people and writing. |
| 22:03.31 | Notify | 03BRL-CAD:carlmoore * 54180 brlcad/trunk/src/proc-db/brickwall.c: add 'horizontal'; change vert_bricks computation; remove blank line (need only 1 blank line at start of mged input) |
| 22:04.47 | Notify | 03BRL-CAD:carlmoore * 54181 brlcad/trunk/src/tclscripts/archer/SketchEditFrame.tcl: remove trailing blank |
| 22:06.05 | maths22 | crit |
| 22:06.08 | maths22 | sorry |
| 22:06.24 | *** join/#brlcad gcimaths (~gcimaths@66-118-151-70.static.sagonet.net) |
