| 02:36.58 | Notify | 03GCI: Skriptkid: Compile BRL-CAD using Dev-C++ - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 04:32.27 | Notify | 03GCI: Melange: Design a commercial CAD comparison diagram - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8141203 |
| 07:51.35 | Notify | 03GCI: Sean: Add a command-line option that sets an object color temporarily - Task Assigned This task has been assigned to javamonn. You have 72 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8126202 |
| 09:50.50 | Notify | 03GCI: Aaron Keesing: Add a primitive surface area function ... for right hyperbolic cylinders (RHC) - Extension required to upload I can't upload the patch to this site unless an extension is given because the time has run out. Or would you rather I create a Sourceforge account and upload to the patch tracker? Aaron K http://www.google-melange.com/gci/task/view/google/gci2012/7982218 |
| 09:59.52 | *** join/#brlcad cristina (~quassel@188.24.75.142) |
| 11:04.47 | *** join/#brlcad StrangeLoop (~solo@14.139.82.6) |
| 11:59.13 | Notify | 03GCI: Melange: Compile with -Wwrite-strings, fix warnings that ensue - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8090205 |
| 12:14.00 | *** join/#brlcad d_rossberg (~rossberg@BZ.BZFLAG.BZ) |
| 12:41.09 | Notify | 03BRL-CAD Wiki:WilburakgemstobbUpchurch * 4855 /wiki/Ways_To_Buy_Coffee_Beans_Website: New page: I found Home Gourmet, a rotary style air conditioning popper there for about $9. With regard to substitutes such as saccharine rather than sugar, and try to abstain from having coffee with... |
| 13:11.02 | *** join/#brlcad Al_Da_Best (Al_Da_Best@cpc2-shep12-2-0-cust21.8-3.cable.virginmedia.com) |
| 13:15.42 | Notify | 03GCI: Daniel Rossberg: Compile with -Wwrite-strings, fix warnings that ensue - Task Closed Congratulations, this task has been completed successfully. http://www.google-melange.com/gci/task/view/google/gci2012/8090205 |
| 13:17.56 | *** join/#brlcad Alexandur (4d461d04@gateway/web/freenode/ip.77.70.29.4) |
| 13:36.27 | Notify | 03GCI: Daniel Rossberg: Compile BRL-CAD using Dev-C++ - Where is the IDE? As far as I can see you havn't used the Dev-C++ IDE. Is it possible to generate project files for this IDE with CMake and build BRL-CAD with these? What you did was simply using the GNU compiler which came with the Dev-C++ IDE. (Correct me if I'm wrong.) Concerning... http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 13:36.37 | Notify | 03GCI: Daniel Rossberg: Compile BRL-CAD using Dev-C++ - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 13:36.57 | *** join/#brlcad EricPoehlsen (~Eric@ip-109-85-52-153.web.vodafone.de) |
| 14:45.12 | Notify | 03GCI: Daniel Rossberg: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Even Notepad can edit non .txt files by changing the filter in the open file dialogue to "All files (*.*)". However, I recommend to use Notepad++ from sourceforge.net. (BTW, why haven't you changed AUTHORS.txt back to AUTHORS?) http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 14:45.17 | Notify | 03GCI: Daniel Rossberg: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you... http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 14:45.27 | Notify | 03GCI: Daniel Rossberg: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 14:53.26 | Notify | 03GCI: A. Long: Fix Visual Studio Express compilation errors - Which version? Which version of Visual Studio Express should be used? 2005, 2008, 2010, or that new Windows 8 one? http://www.google-melange.com/gci/task/view/google/gci2012/8009222 |
| 15:05.47 | Notify | 03BRL-CAD Wiki:WilburakgemstobbUpchurch * 4856 /wiki/Utmost_Coffee_In_The_World: New page: Down below, you'll find black coffee calories, and flavored a drink calories, that are summed ready depending on each one's nutritionally values. Are you able to get the same results throu... |
| 15:18.04 | *** join/#brlcad merzo (~merzo@82-44-132-95.pool.ukrtel.net) |
| 15:20.33 | Notify | 03GCI: Daniel Rossberg: Fix Visual Studio Express compilation errors - Look at the reference link given in the task's description You have to look at the result (uploaded data) there. http://www.google-melange.com/gci/task/view/google/gci2012/8009222 |
| 15:35.24 | Notify | 03GCI: Skriptkid: Compile BRL-CAD using Dev-C++ - Nope Cmake does not support Dev C++ yet. You can generate only Visual Studio, MinGW, Unix and some other makefiles. But no Dev C++. I did try a workaround. I generated Visual Studio project files and tried importing them in Dev C++, but that's not possible either, since Cmake generates VS... http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 15:43.43 | Notify | 03GCI: Jacob B: Modify IRC notifier output - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/7979224 |
| 15:44.13 | Notify | 03GCI: Jacob B: Modify IRC notifier output - Timing I had winter break, and I could not work on GCI then. http://www.google-melange.com/gci/task/view/google/gci2012/7979224 |
| 15:45.59 | *** join/#brlcad andrei_ (~andrei@188.25.172.22) |
| 15:50.06 | Notify | 03GCI: Sean: Modify IRC notifier output - Task Assigned This task has been assigned to Jacob B. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/7979224 |
| 15:51.16 | Notify | 03GCI: Alexandur Osenov: Research status of compiling BRL-CAD on MINGW - Can i get more time? Can i get more time? http://www.google-melange.com/gci/task/view/google/gci2012/7954218 |
| 15:51.45 | *** join/#brlcad tofu_ (~sean@66-118-151-70.static.sagonet.net) |
| 15:52.13 | brlcad | waves |
| 15:52.33 | andrei_ | hello, brlcad |
| 15:58.07 | brlcad | mmm, so much backlog |
| 15:58.40 | brlcad | begins rolling out DNS updates to the new server |
| 15:58.44 | Notify | 03GCI: Daniel Rossberg: Research status of compiling BRL-CAD on MINGW - Deadline extended The deadline of the task has been extended with 2 days and 0 hours. http://www.google-melange.com/gci/task/view/google/gci2012/7954218 |
| 15:59.13 | ``Erik | :g/^Notify.*GCI/d should make it more readable O.o |
| 16:06.15 | *** join/#brlcad yiyus (1242712427@je.je.je) |
| 16:25.51 | Notify | 03BRL-CAD Wiki:ShantelujpmgezqzqzhqamoodekmwydwcddxftbiuzDhosane * 4857 /wiki/Contact_Lenses_and_beautiful_Eyes: New page: Do you want to switch to contact lenses from glasses, but you are not certain if contact lenses are secure or if caring for them is as well significantly of a hassle? Or do you wear conta... |
| 16:41.42 | Notify | 03GCI: Skriptkid: Compile BRL-CAD using Dev-C++ - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 16:49.31 | brlcad | ``Erik: heh, maybe |
| 16:49.48 | brlcad | beyond back lastlog anyways, have to visit the log file |
| 17:03.42 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.184.231) |
| 17:10.05 | *** join/#brlcad EricPoehlsen (~Eric@dslb-084-056-089-136.pools.arcor-ip.net) |
| 17:10.22 | *** join/#brlcad Skriptkid_ (~Skriptkid@117.208.184.231) |
| 17:11.40 | Notify | 03GCI: Alexandur Osenov: Research status of compiling BRL-CAD on MINGW - Compilation 1. So i should configure and generate brld-cad with cmake using visual studio? 2. If so is it normal for many of the libraries not to be found? 3. Is it a problem that i am under Windows 7 (64bit) 4. After generating the project which file to compile? In... http://www.google-melange.com/gci/task/view/google/gci2012/7954218 |
| 17:39.02 | Notify | 03GCI: V Rahul: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Notepad++ Thanks for the tip :) I used it, and it works well now. I hope my task will be accepted and marked as complete. http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 17:41.03 | Notify | 03GCI: V Rahul: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 17:57.25 | *** join/#brlcad Skriptkid (~Skriptkid@117.208.184.231) |
| 18:03.17 | *** join/#brlcad Skriptkid_ (~Skriptkid@117.208.184.231) |
| 18:05.32 | brlcad | oops, updated brlcad.org isn't nearly as wiki-safe as it was ... must reload db |
| 18:14.48 | Notify | 03GCI: Arjun Govindjee: Create test for mutex/semaphore locking - Task Claimed I would like to work on this task. http://www.google-melange.com/gci/task/view/google/gci2012/8095204 |
| 18:16.02 | *** join/#brlcad VRahul (7aa4b0e6@gateway/web/freenode/ip.122.164.176.230) |
| 18:30.30 | Notify | 03GCI: Sean: Create test for mutex/semaphore locking - Task Assigned This task has been assigned to Arjun Govindjee. You have 48 hours to complete this task, good luck! http://www.google-melange.com/gci/task/view/google/gci2012/8095204 |
| 18:37.52 | *** join/#brlcad d_rossberg (~rossberg@BZ.BZFLAG.BZ) |
| 18:38.55 | VRahul | Hey Sean, I've marked my task as "Ready for Review". Could you please check it? http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 18:45.37 | brlcad | tasks are reviewed in order |
| 18:55.20 | Notify | 03GCI: Daniel Rossberg: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - There are lots of additional white-spaces in your patch Probably because of copying it from Google docs (html). Furthernmore your base version seems outdated. Use the subversion diff tool to see what I mean, http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 18:57.01 | Notify | 03GCI: Daniel Rossberg: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you... http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 18:58.16 | Notify | 03GCI: Daniel Rossberg: Compile BRL-CAD using Dev-C++ - Can you create CodeBlocks files with CMake cmake -G "CodeBlocks - Unix Makefiles" and import these in Dev C++? http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 18:58.26 | Notify | 03GCI: Daniel Rossberg: Compile BRL-CAD using Dev-C++ - Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. http://www.google-melange.com/gci/task/view/google/gci2012/7945220 |
| 18:58.49 | *** join/#brlcad andrei_ (~andrei@188.25.172.22) |
| 19:02.03 | Notify | 03GCI: V Rahul: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Working on it I'm working on it. Are there any other changes that need to be made? http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 19:06.51 | Notify | 03BRL-CAD:tbrowder2 * 54141 (brlcad/trunk/doc/docbook/resources/brlcad/images/logo-vm-gears.png brlcad/trunk/doc/docbook/resources/brlcad/images/logo-vm.svg): unlock gears |
| 19:07.16 | Notify | 03GCI: V Rahul: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - 7.22.0 I downloaded the latest version which was available 4 or 5 days ago. Mentor Sean asked me to download the BRL-CAD v7.22.0. Is there an updated version of BRL-CAD? If yes, should I download that and check for changes? I din't see news of any new... http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 19:09.50 | caen23 | d_rossberg: i don't think VRahul's version of brlcad is outdated, but i don't understand why he removed a lot of lines, including the gci contributions |
| 19:11.29 | brlcad | caen23: question about a couple of your recent commits |
| 19:12.02 | brlcad | curious why you made eto's V a vect_t? that come up on something? |
| 19:12.59 | brlcad | V for most primitives is a vertex (i.e., a point), which consequently works as a vector from the origin but is slightly different semantically |
| 19:13.17 | caen23 | let me check something |
| 19:15.07 | brlcad | I could see someone passing a point_t to a bn_*() function expecting a vect_t and llvm complaining |
| 19:16.08 | brlcad | but that'd beg a question of whether the bn function should be using vect's or points and whether the callee should be casting (as they are equivalent types) |
| 19:16.36 | caen23 | sorry, i was wrong. i got some things mixed up, i'll revert it now |
| 19:16.51 | brlcad | not a big deal, was more curious |
| 19:17.16 | brlcad | r54136 is more of an issue since that affects performance |
| 19:17.48 | brlcad | removing the 'inline' one bu_bitv_shift() is no good.. the fix should have been a cmake change to a non-warning form of inline |
| 19:18.36 | caen23 | while we're at it, i also changed rt_tgc_internal.v to a point_t from a vect_t because all other v's are points. i asked before changing it, but didn't get any answer. should i revert that, too? |
| 19:20.24 | caen23 | regarding inline, i don't understand what "non-warning form of inline" means. something like _inline_ instead of inline? |
| 19:26.34 | Notify | 03GCI: Daniel Rossberg: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - You should work with the head revision in the SVN repository Which is a 7.22.1 (as you said you did in "SVN Checkout"). Do you use TortoiseSVN? http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 19:29.41 | brlcad | caen23: so you made tgc a point and eto a vect ? :) |
| 19:30.22 | caen23 | yes |
| 19:33.39 | caen23 | ugh, i think i got confused because in eto_specific, it's a vect (always has been) and i thought they should match |
| 19:36.14 | Notify | 03GCI: V Rahul: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Yes Yes, I use TortoiseSVN. I will download the latest version. Is it available on http://brlcad.org/wiki/Deuces ? The "Download our BRL-CAD Virtual Machine (VM) image " link takes me to the 7.22.0 download page. http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 19:38.20 | *** join/#brlcad EricPoehlsen (~Eric@dslb-084-056-089-136.pools.arcor-ip.net) |
| 19:46.55 | brlcad | point sounds right to me, it is a point, no? |
| 19:47.31 | caen23 | tgc? now it is |
| 19:48.19 | brlcad | i mean the intent of the field, not the type itself |
| 19:51.07 | d_rossberg | VRahul: the virtual machine is good too - if you make a "svn update" there you get the current head version |
| 19:53.10 | caen23 | brlcad: i think i messed that up, too. it's supposed to be a vect |
| 20:01.45 | brlcad | caen23: what do you mean? |
| 20:02.06 | brlcad | d_rossberg: happy new year! |
| 20:02.25 | caen23 | v is supposed to be a vect in rt_tgc_internal, and i changed it to point |
| 20:02.35 | brlcad | and Froehliche Weinachten |
| 20:03.12 | brlcad | caen23: what makes you think it's supposed to be a vect? |
| 20:03.36 | caen23 | it's passed to the VADD2 macro which adds to vect's |
| 20:03.43 | caen23 | two* vect's |
| 20:04.02 | brlcad | the vmath macros are almost entirely type-agnostic |
| 20:04.56 | brlcad | a point is interchangeable with a vector with a homogeneous zero-centered coordinate system |
| 20:05.19 | brlcad | so that wouldn't indicate it one way or the other -- the comments and/or meaning of the field is what matters |
| 20:05.42 | brlcad | that field is the position of the tgc, just like it is for all?most other primitives so point_t sounds right to me |
| 20:06.28 | d_rossberg | waves: Einen guten Rutsch! |
| 20:07.46 | caen23 | brlcad: in rtgeom.h, rt_tgc_internal is not commented |
| 20:14.26 | brlcad | so the place it's used (the 'in' command) would be the remaining documentation and that is requested as the position of the cone |
| 20:16.59 | caen23 | so that was alright |
| 20:17.16 | *** part/#brlcad VRahul (7aa4b0e6@gateway/web/freenode/ip.122.164.176.230) |
| 20:21.04 | caen23 | about the inline issue, i don't understand what "non-warning form of inline" means. something like _inline_ instead of inline? i think it was complaining about the other two inline functions in the file being static, and since bu_bitv_shift used them, and was used outside the file, they weren't really static |
| 20:33.47 | *** join/#brlcad luca79 (~luca@2.192.77.162) |
| 20:35.44 | brlcad | yeah |
| 21:08.25 | brlcad | caen23: do you have the exact warning it gave you? |
| 21:09.03 | brlcad | it's true about it trying to inline a static function (and we're okay with that) |
| 21:09.17 | brlcad | and it technically should be okay because it should be inlining the static functions too |
| 21:09.43 | brlcad | we could just as well roll those two statis up into the guts of bu_bitv_shift() but separate them out for ease of understanding |
| 21:10.58 | caen23 | i don't have the message right now, but i have the llvm i used and i can build with inline to get it back |
| 21:11.50 | Notify | 03GCI: Jacob B: Modify IRC notifier output - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/7979224 |
| 21:14.18 | caen23 | brlcad: static function 'floor_ilog2' is used in an inline function with external linkage |
| 21:19.57 | *** join/#brlcad luca79 (~luca@2.192.77.162) |
| 21:49.42 | Notify | 03GCI: V Rahul: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Major difference Is there a major difference between 7.22.0 and 7.22.1? Unfortunately, I'm not able to download the 7.22.1 due to low available bandwidth. If my computing knowledge is right, there wouldn't be a great difference between 7.22.0 and 7.22.1.... http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 22:02.08 | brlcad | caen23: where's the external linkage? floor_ilog2() should also be static inline |
| 22:03.14 | brlcad | it's an order of operations issue -- if floor_ilog2() is inlined into bu_bitv_shift() then there's no problem inlining bu_bitv_shift() externally |
| 22:03.49 | caen23 | i think that it tries expanding it like a macro, and when it needs to replace bu_bitv_shift with floor_ilog2, it can't because floor is static :-? |
| 22:04.37 | brlcad | except it can because it's also inlinable ;) |
| 22:05.52 | brlcad | the problem is inline is just a hint, so it's not that what it's warning(?) about is wrong but just not helpful since that is the intended behavior |
| 22:06.13 | brlcad | if it were treating them like a macro, there wouldn't be a problem because it would properly do all the inlining |
| 22:06.41 | brlcad | we're just trying to play nicely with functions instead of macros (again, just for readability) |
| 22:09.48 | caen23 | hmm… i tried grepping the src dir, and it seems the function is only used inside a test |
| 22:33.47 | Notify | 03GCI: Melange: Compile BRL-CAD with GCC 4.7+ on Raspberry Pi - No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8038205 |
| 22:59.09 | Notify | 03GCI: V Rahul: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Update I have cleared the extra white spaces, which you pointed out. I had inserted them, becuase when you open the files with Notepad, it doesn't insert a space between 2 lines, and I thought they were punctuation errors! Sorry about that. I've made the... http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 23:00.10 | Notify | 03GCI: V Rahul: Find and Fix 5 spelling mistakes in at least 40 different files (#2) - Ready for review The work on this task is ready to be reviewed. http://www.google-melange.com/gci/task/view/google/gci2012/8093205 |
| 23:58.27 | *** join/#brlcad velociostrich (~anonymous@c-24-0-153-224.hsd1.pa.comcast.net) |