| 00:01.59 | brlcad | var[idx] is really just a shorthand for *(var+(idx)) |
| 00:03.48 | caen23 | i'm actually surprised at how many people consider this a secret. when i learnt c, it was covered in the pointers chapter of "c programming: a modern approach". this is also one of the most voted answers to a question about c programming tricks on stack overflow |
| 00:05.01 | brlcad | even if it's covered, it's easy to forget after a few years |
| 00:05.15 | brlcad | until you leave and breath pointers |
| 00:05.21 | brlcad | s/leave/live/ |
| 00:05.59 | brlcad | bhlegm: on crit? |
| 00:06.06 | bhlegm | yes |
| 00:06.31 | brlcad | you could invoke the select and save the output outside of mysql |
| 00:07.13 | brlcad | e.g., echo "select * from ...;" | mysql -uuser -p db > outfile |
| 00:07.16 | Barakados | can someone help me? |
| 00:07.25 | Barakados | sighs |
| 00:07.42 | brlcad | Barakados: you need to be much more specific than that |
| 00:08.14 | brlcad | "I just need to know the basics of driving a submarine, can anyone help me?" .. well .. maybe? |
| 00:08.34 | Barakados | Ok |
| 00:08.35 | brlcad | classic matra we repeat frequently here |
| 00:08.37 | brlcad | ~ask |
| 00:08.37 | ibot | Questions in the channel should be specific, informative, complete, concise, and on-topic. Don't ask if you can ask a question first. Don't ask if a person is there; just ask what you intended to ask them. Better questions more frequently yield better answers. We are all here voluntarily or against our will. |
| 00:08.39 | Barakados | https://google-melange.appspot.com/gci/task/view/google/gci2012/7945212 |
| 00:09.01 | Barakados | I haven't gotten any code from the two files |
| 00:09.03 | brlcad | I know the problem well |
| 00:09.33 | andrei | brlcad : http://www.valoratsea.com/basics.htm does this help ? :) |
| 00:11.05 | brlcad | Barakados: so what's your question? |
| 00:11.33 | Barakados | I have a few: I believe i need the code to start |
| 00:11.54 | brlcad | be aware that not all bugs and enhancements are created equal -- a problem could very well be too hard for you to tackle and that's okay |
| 00:16.35 | brlcad | if you try and don't make progress, that's fine and hopefully you learn something either way |
| 00:16.47 | brlcad | i'll gladly answer your questions, but they need to be specific |
| 00:17.14 | brlcad | you do need the code, so does that imply you haven't even downloaded the source code yet? |
| 00:18.52 | Barakados | oh it's on the website? |
| 00:19.14 | caen23 | brlcad: when can we expect a new round of task reviews? :D |
| 00:22.26 | brlcad | caen23: yep |
| 00:23.46 | Barakados | brlcad: downloadingsource now |
| 00:24.06 | Notify | 03GCI: cheekujodhpur has left the following comment at Write a "BRL-CAD Commands Quick Reference" document http://www.google-melange.com/gci/task/view/google/gci2012/7991205: Task Claimed I would like to work on this task. |
| 00:24.11 | brlcad | today's reviewers are erik and harmanpreet |
| 00:24.19 | Barakados | can you accept my current task so i can get started? |
| 00:24.45 | brlcad | I haven't seen erik but I know harmanpreet has been busy reviewing |
| 00:24.56 | Notify | 03GCI: Ben Bray has left the following comment at Implement a primitive volume function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7987216: Calling rt_volume I wasn't able to figure out how to call the method, either. There isn't much documentation, I'm afraid. Have you figured out how to call it yet? The rtweight command is supposed to return the |
| 00:24.57 | Notify | volume... |
| 00:25.01 | Notify | 03GCI: cheekujodhpur has left the following comment at Write a "BRL-CAD Commands Quick Reference" document http://www.google-melange.com/gci/task/view/google/gci2012/7991205: Contact I need the following information: 1. Your contact... 2. In what form do you want the document? |
| 00:25.31 | Notify | 03GCI: Sean has left the following comment at Write a "BRL-CAD Commands Quick Reference" document http://www.google-melange.com/gci/task/view/google/gci2012/7991205: Task Assigned This task has been assigned to cheekujodhpur. You have 48 hours to complete this task, good luck! |
| 00:25.32 | Notify | 03GCI: Andrei Popescu has left the following comment at Write a "BRL-CAD Commands Quick Reference" document http://www.google-melange.com/gci/task/view/google/gci2012/7991205: Task Assigned This task has been assigned to cheekujodhpur. You have 48 hours to complete this task, good luck! |
| 00:25.53 | Barakados | who is sean? |
| 00:26.01 | Notify | 03GCI: Andrei Popescu has left the following comment at Close MGED when both windows are closed http://www.google-melange.com/gci/task/view/google/gci2012/7945212: Task Assigned This task has been assigned to Sean Bashaw. You have 48 hours to complete this task, good luck! |
| 00:26.07 | Barakados | :o |
| 00:26.15 | Barakados | thankyouthankyouthankyouthankyou |
| 00:26.31 | andrei | did we just assign the task simultaneously? |
| 00:28.08 | brlcad | once a task is claimed, you can start working on it |
| 00:28.52 | brlcad | we don't reject a claim unless there's some prior problem with that student |
| 00:29.09 | brlcad | andrei: I think so |
| 00:29.14 | Barakados | one thin, where can i find the methods for quitting the application? |
| 00:35.35 | Notify | 03GCI: cheekujodhpur has left the following comment at Write a "BRL-CAD Commands Quick Reference" document http://www.google-melange.com/gci/task/view/google/gci2012/7991205: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 00:39.25 | brlcad | Barakados: I don't recall specifically, you'll have to look around |
| 00:39.42 | brlcad | there should be a quit callback as well as an event handler registered that closes the application |
| 00:41.23 | brlcad | what calls what is a detail to be sorted out as part of the task |
| 00:42.10 | brlcad | everything should be in src/mged and src/tclscripts/mged .. maybe some window event stuff in src/libdm, but I don't think so |
| 00:42.46 | Notify | 03GCI: cheekujodhpur has left the following comment at Upgrade Mediawiki website http://www.google-melange.com/gci/task/view/google/gci2012/7974236: Task Claimed I would like to work on this task. |
| 00:42.46 | Barakados | ok |
| 00:43.11 | Notify | 03GCI: Sean has left the following comment at Upgrade Mediawiki website http://www.google-melange.com/gci/task/view/google/gci2012/7974236: Task Assigned This task has been assigned to cheekujodhpur. You have 72 hours to complete this task, good luck! |
| 00:44.33 | brlcad | Barakados: just so you know, we're not pretending this is a "simple" task by any stretch of the imagination |
| 00:44.38 | *** join/#brlcad Cheeku (Cheeku@14.96.217.11) |
| 00:44.43 | Barakados | true true |
| 00:44.47 | brlcad | it very well may be too hard for you to do and that is okay |
| 00:45.14 | Cheeku | I am on the update mediawiki website task |
| 00:45.22 | brlcad | give it a try and if you find yourself completely unable to make progress without us feeding you the next bit of information, then you should probably move on |
| 00:45.37 | brlcad | Cheeku: i'm your POC, I'll contact you in PM |
| 00:46.11 | brlcad | Cheeku: our server setup is tightly controlled and monitored so there's some work involved to get access established |
| 00:46.36 | Notify | 03GCI: Erik has left the following comment at Add a primitive surface area function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7983225: Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the |
| 00:46.37 | Notify | task... |
| 00:46.42 | brlcad | cheeku: have you worked with mediawiki before? |
| 00:47.19 | Cheeku | As I said...nope.. |
| 00:47.28 | brlcad | what content management systems have you worked with? |
| 00:47.33 | brlcad | any? |
| 00:48.00 | Cheeku | no... |
| 00:48.18 | Cheeku | I don't use any CMS |
| 00:48.26 | brlcad | you've run apache but never set up any web application? |
| 00:48.34 | Cheeku | I have set up web applications |
| 00:48.38 | brlcad | such as? |
| 00:49.01 | Cheeku | My school alumni site...now down... |
| 00:49.34 | Cheeku | recently designed new website for sugar labs |
| 00:49.37 | Cheeku | you can see that... |
| 00:49.41 | Cheeku | here's the link |
| 00:49.58 | Cheeku | http://14.96.217.11/sugar |
| 00:52.06 | brlcad | Cheeku: but specifically, have you ever installed some piece of infrastructure, some open source web app |
| 00:52.57 | Cheeku | NO |
| 00:53.14 | brlcad | okay, that's good to know |
| 00:53.21 | brlcad | have you used mysql before? |
| 00:53.27 | Cheeku | yes |
| 00:53.35 | brlcad | accessed it from php, I presume? |
| 00:53.40 | Cheeku | yes |
| 00:53.48 | brlcad | accessed it directly on the command line? |
| 00:53.58 | Cheeku | yes |
| 00:54.14 | Cheeku | accessed from command-line just to see the records |
| 00:54.31 | brlcad | okay, and you've used ssh before? |
| 00:54.35 | Cheeku | no |
| 00:55.02 | brlcad | hmm, so you'll need to browse the web on that for a tutorial because this task requires accessing a server remotely via SSH |
| 00:55.26 | Cheeku | alright...doing it.. |
| 00:55.30 | brlcad | ssh is pretty simple, but teaching you how to use it is beyond the project's scope |
| 00:55.47 | brlcad | you can try ssh'ing into your own machine to see how it works |
| 00:56.13 | brlcad | the rest we'll discuss in private to get your account set up |
| 00:59.26 | Notify | 03GCI: Erik has left the following comment at Add a primitive surface area function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7983225: needs some minor changes 1: I don't understand why you'd be undefining "major" and "minor", can those be removed? 2: all variable declarations should come at the beginning of the block, before RT_HYP_CK_MAGIC. The a... |
| 01:00.13 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) |
| 01:01.24 | bhlegm | Cheeku ikr this stuffs intense |
| 01:02.04 | brlcad | there be erik |
| 01:03.31 | ``Erik | didn't realize I was reviewing today O.o didja throw the mentor schedule on a wiki page, or just in that one email that I can't access for the next 2 weeks? :D |
| 01:04.07 | brlcad | heh, yep e-mail |
| 01:04.21 | ``Erik | I think I have notify set up to catch commit emails, but I want to see a couple commits go through before I add the channel |
| 01:04.26 | brlcad | Mon: Daniel, Sean |
| 01:04.27 | brlcad | Tue: Matt, Erik |
| 01:04.27 | brlcad | Wed: Harmanpreet, Rai |
| 01:04.27 | brlcad | Thu: Andrei, Daniel |
| 01:04.27 | brlcad | Fri: Sean, Matt |
| 01:04.29 | brlcad | Sat: Erik, Harmanpreet |
| 01:04.31 | brlcad | Sun: Rai, Andrei |
| 01:06.06 | caen23 | awesome, there's a bug in svn that doesn't let me finish running svnplot on the whole repo, and the resolution seems to be recompiling svn |
| 01:08.46 | ``Erik | if a 'gitstats' exist, we have a git mirror, too :D |
| 01:11.00 | Barakados | i have a question |
| 01:11.10 | caen23 | ``Erik: i can't seem to find it? |
| 01:11.11 | Barakados | how do i compile mged from the source |
| 01:11.32 | ``Erik | http://crit.brlcad.org/brlcad.git/ |
| 01:13.56 | caen23 | ``Erik: thanks, cloning right now :D |
| 01:14.38 | caen23 | Barakados: have you tried this? http://brlcad.org/wiki/Compiling |
| 01:22.29 | bhlegm | brlcad for the gallery, do you want the rating (that star stuff) to be as it was before as well? |
| 01:25.36 | Notify | 03GCI: Sean Bashaw has left the following comment at Close MGED when both windows are closed http://www.google-melange.com/gci/task/view/google/gci2012/7945212: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 01:25.47 | andrei | heh |
| 01:31.47 | bhlegm | i dont think i can do that |
| 01:35.21 | Notify | 03GCI: Sean Bashaw has left the following comment at Create a technical screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8022221: Task Claimed I would like to work on this task. |
| 01:35.51 | Notify | 03GCI: Melange has left the following comment at Find and fix at least 10 spelling mistakes in at least 10 different files http://www.google-melange.com/gci/task/view/google/gci2012/7959223: Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. |
| 01:37.06 | Notify | 03GCI: Sean Bashaw has left the following comment at Create a technical screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8022221: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 01:37.41 | Notify | 03GCI: Sean Bashaw has left the following comment at Find and fix at least 10 spelling mistakes in at least 10 different files http://www.google-melange.com/gci/task/view/google/gci2012/7959223: Task Claimed I would like to work on this task. |
| 01:38.11 | Barakados | i am going to work on the pdf, i see some in there |
| 01:54.25 | brlcad | bhlegm: ideally, yes |
| 01:54.35 | bhlegm | ok :'( |
| 01:54.43 | brlcad | what? |
| 02:12.34 | brlcad | ``Erik: ? |
| 02:14.17 | bhlegm | uhmm |
| 02:18.17 | bhlegm | gallery2's rating system is using the number of rates and finding the average, but in piwigo a rate is counted per user.. i really don't know how to do it |
| 02:18.34 | ``Erik | something went nutso and is chewing memory on crit like a mofo, oomd my image |
| 02:18.35 | bhlegm | per user : every rate is recorded in a table |
| 02:19.08 | bhlegm | as a row* |
| 02:25.43 | *** join/#brlcad caen23 (~caen23@92.81.196.163) |
| 02:26.40 | *** join/#brlcad Notify (~notify@66-118-151-70.static.sagonet.net) |
| 02:26.45 | Notify | 03BRL-CAD:brlcad * 53929 (brlcad/trunk/doc/docbook/system/man1/en/CMakeLists.txt brlcad/trunk/src/fb/CMakeLists.txt brlcad/trunk/src/fb/Makefile.am): apply gci patch (http://www.google-melange.com/gci/task/view/google/gci2012/8030204) from stefi.stoyanova that converts the libfb manual pages to docbook xml format. untested, but did remove the old manual pages while applying the patch. |
| 02:26.48 | Notify | 03BRL-CAD:brlcad * 53930 brlcad/trunk/AUTHORS: credit stefi.stoyanova for contributions migrating fb manual pages to docbook. |
| 02:27.49 | caen23 | brlcad: thanks a lot for reviewing my task :D |
| 02:29.05 | ``Erik | apache went nuts and chewed up all the memory O.o |
| 02:29.37 | Notify | 03BRL-CAD:brlcad * 53931 (brlcad/trunk/include/ged.h brlcad/trunk/src/libged/adc.c and 6 others): really impressive -- apply cezar's gci patch (http://www.google-melange.com/gci/task/view/google/gci2012/8017204) that decouples libged from libdm. |
| 02:30.08 | starseeker | brlcad: did they update the fb patch? there was one man page missing |
| 02:30.15 | caen23 | brlcad: for the "compile brl-cad w/ llvm 3.1" one, would it be enough to run cmake > cmake.txt and make > make.txt and simply upload these files? i've been using llvm to compile brlcad and no errors occurred, so there's no patching needed |
| 02:30.30 | starseeker | llvm? O.o |
| 02:30.50 | ``Erik | doh, brlcad committed the one I was reviewing |
| 02:30.56 | starseeker | just built with clang 3.1... |
| 02:31.12 | Notify | 03BRL-CAD:brlcad * 53932 brlcad/trunk/AUTHORS: double-billing, credit cezar for his work fixing code now (libged/libdm decoupling) in addition to the doc work. |
| 02:31.36 | starseeker | using the static analyzer, even... |
| 02:33.48 | *** join/#brlcad harmanpreet (~chatzilla@210.56.121.43) |
| 03:01.07 | caen23 | starseeker: is the file you were saying was missing from the fb task named "cmap-fb.xml" by any chance? |
| 03:05.48 | brlcad | starseeker: I didn't review them by name, but counted 48 .1 file and same .xml files I thought |
| 03:06.15 | caen23 | starseeker: ugh, nevermind, i forgot to do something |
| 03:06.18 | brlcad | but yeah, he can fix it ;) |
| 03:10.17 | brlcad | ``Erik: just trying to help :) |
| 03:10.41 | brlcad | could clear out that last one remaining, I'm not doing that one |
| 03:40.02 | starseeker | fb-cmap I think was missing |
| 03:40.17 | starseeker | caen23: feel like fixing some more man page errors? :-P |
| 03:41.15 | caen23 | starseeker: yeahp, i'm currently on src/util, and i'll fix what's left next :D |
| 03:42.18 | starseeker | sweet |
| 03:42.59 | starseeker | I think you'll need to start by applying the patch from the previous src/fb, seeing if fb-cmap is missing, then fixing the errors in those (new) files... |
| 03:43.58 | starseeker | brlcad: I see the old src/fb .1 files are gone, but I don't see the new xml files - did you do the svn add? |
| 03:44.13 | caen23 | it wasn't missing, i forgot to update cmakelists and it wouldn't build :D |
| 03:44.37 | starseeker | yep |
| 03:46.21 | starseeker | hang on... |
| 03:51.40 | Notify | 03BRL-CAD:starseeker * 53933 (brlcad/trunk/doc/docbook/system/man1/en/bw-fb.xml =================================================================== and 465 others): Add man1 xml files from fb. |
| 03:56.20 | Notify | 03BRL-CAD:starseeker * 53934 brlcad/trunk/doc/docbook/system/man1/en/CMakeLists.txt: Add fb-cmap.xml - appears to have been missed in initial conversion. |
| 03:57.03 | starseeker | caen23: that should fix the CMake configure stage, but by default the build won't work now because we turned on strict DocBook building and these fb man pages don't qualify |
| 03:58.10 | starseeker | give me a few minutes... |
| 03:59.26 | caen23 | starseeker: hmm… i think i'm finished w/ the src/util task, but i'm not really used to svn, so i'm not going to commit the changes. but i'll upload the patch to gci, and could you take a look and apply it if everything's ok? |
| 03:59.52 | starseeker | caen23: sure, if you're more comfortable with that |
| 04:00.07 | starseeker | I won't be able to properly test it until I squash the fb errors |
| 04:00.13 | starseeker | hopefully that'll be quick |
| 04:00.44 | caen23 | here's the link :D http://www.google-melange.com/gci/task/view/google/gci2012/7970249 |
| 04:01.51 | starseeker | caen23: nice job on the libged patch, by the way |
| 04:02.16 | starseeker | tries to recall if he's every had brlcad tell him that a patch was *exactly* what he was looking for... |
| 04:02.21 | starseeker | s/every/ever/g |
| 04:02.47 | caen23 | what i'm mainly worried about is CMakeLists and Makefile.am. what i did was i removed all the man references from src/util and added the new .xml's to man1/en |
| 04:02.57 | starseeker | that's correct |
| 04:04.49 | caen23 | heh, thanks about the libged patch. i spent 4 hours because of a missing asterisk, lol. a function signature was something like (struct dm, char **), and i wrote a wrapper as (struct dm, char *). kept getting segfaults and had no idea why until i checked the function i was wrapping |
| 04:06.45 | Notify | 03BRL-CAD:starseeker * 53935 (brlcad/trunk/doc/docbook/system/man1/en/bw-fb.xml brlcad/trunk/doc/docbook/system/man1/en/cell-fb.xml and 35 others): Ah, crud - gummed up the patch application. Try again. |
| 04:08.21 | starseeker | shoot - these are still db4 |
| 04:08.58 | caen23 | mine? or the fb ones? |
| 04:09.04 | starseeker | the fb ones |
| 04:09.12 | starseeker | gotta fix those before I can get to yours |
| 04:10.32 | caen23 | :D |
| 04:16.10 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.63.216) |
| 04:18.50 | Skriptkid | Are the Surface area tasks also 1-point tasks? |
| 04:29.19 | brlcad | starseeker: oops, somehow they didn't add |
| 04:30.02 | brlcad | and you're right fb-cmap doesn't exist |
| 04:40.55 | Notify | 03BRL-CAD:starseeker * 53936 (brlcad/trunk/doc/docbook/system/man1/en/bw-fb.xml brlcad/trunk/doc/docbook/system/man1/en/cell-fb.xml and 36 others): GCI commits didn't pass strict for fb - fixing. |
| 04:45.05 | brlcad | starseeker: heh, I'd already created a gci task to make all these remaining pages pass strict later |
| 04:45.13 | brlcad | still waiting for two more sets to come in |
| 05:01.22 | starseeker | brlcad: oh, sorry |
| 05:01.47 | starseeker | brlcad: it was a build-breaking issue, so I figured it couldn't wait |
| 05:02.54 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.63.216) |
| 05:03.14 | Notify | 03BRL-CAD:starseeker * 53937 (brlcad/trunk/doc/docbook/system/man1/en/cell-fb.xml brlcad/trunk/doc/docbook/system/man1/en/cmap-fb.xml and 35 others): Use same header as src/conv conversions. |
| 05:04.27 | starseeker | brlcad: I had mentioned the fb-cmap page being missing earlier - guess it got lost in the noise |
| 05:05.11 | *** join/#brlcad elf` (~elf11_@92.80.1.188) |
| 05:06.19 | starseeker | caen23: I"m getting a "malformed patch" error |
| 05:06.38 | starseeker | caen23: go ahead and commit - I'll straighten it out if there's any problem |
| 05:06.58 | starseeker | remember to include the full URL in the commit message |
| 05:07.54 | Notify | 03BRL-CAD:starseeker * 53938 brlcad/trunk/INSTALL: minor INSTALL tweak |
| 05:08.16 | brlcad | starseeker: except there's two more big ones coming -- maybe revert it back to non-strict until after that task |
| 05:08.30 | starseeker | growl |
| 05:08.32 | starseeker | I suppose |
| 05:09.08 | brlcad | it's too much work to do it at the same time, and too much work to break up the tasks .. all we have to do is wait a lil :) |
| 05:10.00 | brlcad | starseeker: any binaries you'd like to see crash less (where we haven't identified bugs) |
| 05:10.05 | brlcad | already have mged, archer, and rt |
| 05:11.19 | Notify | 03BRL-CAD:starseeker * 53939 brlcad/trunk/CMakeLists.txt: Back off on strict XML until we're done with GCI conversion of man pages, to allow for task breakout of conversion and strict fixes. |
| 05:11.19 | starseeker | erm |
| 05:11.30 | starseeker | tries to remember what he's crashed lately |
| 05:12.03 | starseeker | brlcad: did you get a chance to try the clang static analyzer? If any of those are legit, there may be some GCI clean-up work |
| 05:12.29 | starseeker | isn't sure how to evaluate the results for false positives... |
| 05:14.02 | starseeker | brlcad: nothing's leaping to mind with the crash question |
| 05:15.03 | caen23 | starseeker: hmm… i've tried uploading a new patch http://www.google-melange.com/gci/task/view/google/gci2012/7970249 |
| 05:15.55 | starseeker | caen23: there we go |
| 05:17.04 | starseeker | thanks |
| 05:17.38 | caen23 | so is it fine, or have i broken something? :D |
| 05:17.46 | starseeker | checking... |
| 05:20.39 | starseeker | caen23: looks good |
| 05:20.45 | starseeker | you're go for the commit |
| 05:21.01 | caen23 | alright, thanks :D |
| 05:21.13 | starseeker | want to do it yourself or shall I? |
| 05:21.31 | caen23 | i think i'll try it |
| 05:21.43 | starseeker | cool - remember, full URL in message :-) |
| 05:22.30 | caen23 | hmm… is this message fine? :D "Convert src/util man pages to DocBook XML (GCI: http://www.google-melange.com/gci/task/view/google/gci2012/7970249)" |
| 05:22.40 | starseeker | caen23: yep |
| 05:23.24 | starseeker | caen23: in fact, I think these all validate too |
| 05:23.32 | caen23 | mine? |
| 05:23.40 | starseeker | brlcad: were you going to create a separate task for util validation? |
| 05:23.43 | starseeker | caen23: looks like it... |
| 05:23.53 | caen23 | oh, yes, i took care of it |
| 05:24.03 | starseeker | ~caen23++ |
| 05:24.19 | caen23 | lol :D |
| 05:24.22 | *** join/#brlcad Barakados (~BashawS@c-67-188-214-88.hsd1.ca.comcast.net) |
| 05:24.23 | starseeker | wow. If brlcad put up a util validation task, make sure you claim it |
| 05:24.55 | caen23 | nope, looks like he didn't |
| 05:25.11 | starseeker | caen23: he probably will... how long did you spend on util, all told? |
| 05:27.06 | caen23 | probably less than 30 minutes, can't tell exactly, but after running doclifter, the only errors were related to entities, and i wrote a script to get rid of the most common ones. if you add my trying to understand how svn works… probably more than 1h |
| 05:28.49 | starseeker | caen23: we'll see what brlcad wants to do |
| 05:29.10 | starseeker | did he put up any other Docbook tasks yet? |
| 05:30.52 | caen23 | the only one that's open right now is the one for converting the rest of the files, as far as i can see |
| 05:31.58 | caen23 | this is where i look for tasks :D http://www.google-melange.com/gci/org/google/gci2012/brlcad |
| 05:34.00 | starseeker | caen23: did your commit go through? |
| 05:34.28 | caen23 | just a sec :D |
| 05:34.38 | Barakados | oh and can someone accept my new task? |
| 05:35.32 | starseeker | Barakados: I'm not a formal GCI reviewer, but one of them should be around later |
| 05:36.22 | caen23 | hmm… i can't seem to commit because svn:mime-type is not set. let me try one more thing |
| 05:37.20 | starseeker | caen23: ah - this may help, although you may have to revert and re-do the adding of the xml files: http://brlcad.org/wiki/Mime-types |
| 05:38.54 | caen23 | what i did was i edited config to include "*.xml = svn:mime-type:application/xml" under section auto-props |
| 05:39.57 | starseeker | caen23: we normally use *.xml = svn:mime-type=text/xml;svn:eol-style=native |
| 05:40.48 | caen23 | ugh, sorry then. i got mine from wiki, and it was written that text/xml is deprecated :-?? |
| 05:41.02 | caen23 | wikipedia*, not wiki |
| 05:44.34 | caen23 | seems there's no getting around the revert :( so after i do svn revert, i should do svn add * inside man1/en? |
| 05:44.43 | starseeker | right |
| 05:44.57 | starseeker | but just revert the xml |
| 05:45.01 | starseeker | not the CMakeLists.txt |
| 05:45.08 | starseeker | svn revert *.xml |
| 05:45.46 | starseeker | caen23: you'll have to mention the mime type thing to brlcad - I'm not sure why xml wouldn't be classified as text, but maybe someone has a reason... |
| 05:47.07 | caen23 | actually i might be wrong, it was deprecated in an expired draft |
| 05:48.19 | starseeker | makes a note to self to put his superlu and spooles CMake build files on github, in case they should prove necessary down the road... |
| 05:50.06 | Barakados | can someone help me out? |
| 05:50.22 | Barakados | how do i use the man to xml software on my mac? |
| 05:50.41 | starseeker | Barakados: um. You install python, then run the script? |
| 05:50.53 | caen23 | Barakados: do you have homebrew installed? |
| 05:50.55 | Barakados | when i run it it is blank |
| 05:52.09 | caen23 | are you running it from the terminal, or are you double-clicking the file inside the archive? |
| 05:52.19 | Barakados | double click |
| 05:52.31 | caen23 | open Terminal.app inside Applications/Utilities |
| 05:52.42 | Barakados | i know terminal |
| 05:52.54 | Barakados | give me the commands to use :P |
| 05:53.05 | Barakados | that's all i need thanks :D |
| 05:53.11 | caen23 | doclifter -x <path to file to convert> |
| 05:53.24 | Barakados | that makes sense |
| 05:53.40 | caen23 | where doclifter means the whole path to doclifter. for me, it's ~/Downloads/doclifter-2.9/doclifter |
| 05:54.01 | Barakados | i know |
| 05:54.07 | Barakados | i go to the directory |
| 05:54.09 | Barakados | easier |
| 05:54.27 | caen23 | yeahp |
| 05:55.24 | brlcad | starseeker: no I hadn't tried, but there are two "compile brl-cad with clang" tasks using latest release and trunk |
| 05:55.42 | brlcad | static analyzer is still one to be added |
| 05:55.43 | Barakados | command not found |
| 05:56.08 | Notify | 03BRL-CAD:caen23 * 53940 (brlcad/trunk/doc/docbook/system/man1/en/CMakeLists.txt brlcad/trunk/src/util/CMakeLists.txt brlcad/trunk/src/util/Makefile.am): ----------- |
| 05:56.12 | caen23 | inside doclifter-2.9, you run ./doclifter, not doclifter |
| 05:56.33 | brlcad | validation task isn't yet posted, there's still one more docbook task pending |
| 05:56.56 | Barakados | brlcad, can you validate my docbook task? |
| 05:57.26 | brlcad | what? |
| 05:57.35 | Barakados | I signed up for a task |
| 05:57.46 | Barakados | https://google-melange.appspot.com/gci/task/view/google/gci2012/8005210 |
| 05:58.00 | Barakados | if you give it to me i can have it done in an hour |
| 05:58.37 | *** join/#brlcad harmanpreet (~chatzilla@210.56.126.141) |
| 05:59.37 | brlcad | caen23: alas the way subversion (and other) revision control diffing works, the files need to be text/*something* in order for tools to become content aware |
| 06:00.10 | brlcad | Barakados: term is assign, not validate ;) |
| 06:00.14 | Barakados | sorry |
| 06:00.55 | brlcad | no worries |
| 06:01.42 | caen23 | brlcad: ah, didn't know that. these tasks the first time i've used svn :D |
| 06:02.00 | brlcad | most repos have that issue |
| 06:03.42 | Barakados | how do i use svn add? |
| 06:04.14 | Barakados | nevermind, googled |
| 06:04.32 | Barakados | never mind, still need help |
| 06:05.50 | *** part/#brlcad Barakados (~BashawS@c-67-188-214-88.hsd1.ca.comcast.net) |
| 06:07.08 | *** join/#brlcad Barakados (~BashawS@c-67-188-214-88.hsd1.ca.comcast.net) |
| 06:11.17 | Barakados | so... |
| 06:19.25 | starseeker | wonders if there are any stepcode tasks that could be GCI scoped? |
| 06:19.50 | brlcad | yeah, tricky there -- undoubtedly are |
| 06:20.28 | brlcad | could craete tasks to commit our changes one at a time to the git repo, that'd be a hoot |
| 06:21.14 | starseeker | that's a thought - march down this list? http://stepcode.org/mw/index.php/BRL-CAD_patches |
| 06:21.33 | brlcad | maybe, or up from our commits -- just do them all |
| 06:21.55 | caen23 | brlcad: regarding the llvm tasks, they plan to release 3.2 on the 16th. perhaps the "build with trunk" one is not really necessary? |
| 06:22.07 | brlcad | caen23: nope, that's the point |
| 06:22.22 | starseeker | brlcad: there are some of ours that aren't applicable to stepcode (Marks lists 'em down at the bottom of that page...) |
| 06:22.39 | brlcad | building with trunk now is probably nearly as good as building with 3.2 in a couple weeks |
| 06:22.57 | brlcad | more interested in what fails |
| 06:23.09 | starseeker | 3.1 I wouldn't expect to fail |
| 06:23.17 | starseeker | trunk, probably yes |
| 06:23.26 | caen23 | brlcad: makes sense |
| 06:23.28 | brlcad | i wouldn't either but someone can at least verify that |
| 06:24.13 | brlcad | welp, closed a half dozen, created a half dozen .. not too shabby |
| 06:24.23 | brlcad | still has several dozen to be added |
| 06:25.04 | brlcad | and that's not even counting tasks spawning from gci work recently completed |
| 06:26.42 | starseeker | brlcad: should caen23 get two completed tasks? his util .xml conversion not only was successful but passed strict at the same time |
| 06:26.46 | Notify | 03BRL-CAD:starseeker * 53941 brlcad/trunk/doc/docbook/system/man1/en/CMakeLists.txt: fix indenting |
| 06:28.12 | starseeker | kicks off a distcheck and hits the hay |
| 06:31.12 | starseeker | gets spooles and superlu on github |
| 06:31.36 | starseeker | oh yeah, cassowary... heh |
| 06:32.40 | brlcad | starseeker: he can claim and close out the validation task after he finishes his currnet (the last set) |
| 06:33.37 | starseeker | brlcad: cool. Wasn't sure what you wanted to do - just wanted to make sure the issue didn't get washed away in the GCI tsunami |
| 06:34.27 | brlcad | nope, it's there, just unpublished |
| 06:35.57 | starseeker | reflects that if we could somehow chop the stepcode merge into segments that would allow for successful completion, that would be a major step towards qualifying for fedora repos... |
| 06:36.23 | starseeker | would have to make a FindSTEPCODE.cmake that actually works though |
| 06:39.04 | starseeker | brlcad: you'd have a better sense than I would of whether this would be a sensible GCI task, but perhaps it would be helpful to have a "how to set up a Windows PC for BRL-CAD compilation" document? |
| 06:39.59 | starseeker | isn't sure if that makes sense, given that it may turn obsolete relatively quickly... |
| 06:41.03 | brlcad | was intending to after these are all fixed: https://google-melange.appspot.com/gci/task/view/google/gci2012/7948214 |
| 06:41.14 | brlcad | that's the "not even counting tasks spawning from gci work recently completed" |
| 06:53.25 | Barakados | brlcad: is xml files docbook? |
| 07:03.00 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.63.216) |
| 07:04.10 | *** join/#brlcad harmanpreet (~chatzilla@210.56.122.174) |
| 07:06.15 | bhlegm | sorry if this is a stupid question, but is there a trash bin on the server? |
| 07:16.28 | Barakados | all that's left is to compile the source, and then send in a patch |
| 08:21.20 | Barakados | i have errors in files i didn't ediy |
| 08:21.22 | Barakados | *edit |
| 08:39.27 | *** join/#brlcad harmanpreet (~chatzilla@124.253.149.220) |
| 08:41.52 | *** join/#brlcad harmanpreet_ (~chatzilla@124.253.144.204) |
| 08:45.16 | Barakados | ok then |
| 09:05.11 | *** join/#brlcad archivist (~archivist@host81-149-189-98.in-addr.btopenworld.com) |
| 09:59.16 | *** join/#brlcad harmanpreet (~chatzilla@124.253.153.78) |
| 10:11.10 | *** join/#brlcad Silvrous (4f7043b8@gateway/web/freenode/ip.79.112.67.184) |
| 10:11.55 | Silvrous | How can I use functions like sin/cos or sqrt? Are they already defined, or do I need to include math.h ? |
| 10:31.34 | *** join/#brlcad harmanpreet (~chatzilla@124.253.152.86) |
| 11:26.29 | *** join/#brlcad Gaganjyot (~Gaganjyot@117.207.155.255) |
| 11:36.21 | harmanpreet | brlcad: are you there? |
| 12:07.47 | *** join/#brlcad caen23 (~caen23@92.81.196.163) |
| 12:08.07 | *** join/#brlcad Ashish101 (75c2231a@gateway/web/freenode/ip.117.194.35.26) |
| 12:08.51 | *** join/#brlcad GrantMercer015 (GrantMerce@p23184-ipngn100301fukuokachu.fukuoka.ocn.ne.jp) |
| 12:08.51 | Ashish101 | @brlcad: What oes the zero thingi in the View tab DOO ... |
| 12:10.06 | Ashish101 | ??? |
| 12:10.17 | Ashish101 | <PROTECTED> |
| 12:10.24 | GrantMercer015 | where are you from? |
| 12:10.55 | GrantMercer015 | it's the dead of the night for our mentors, dont be expecting help during this time on brlcad |
| 12:11.24 | GrantMercer015 | usually 7-8 hours from now theyll be on answering our questions. Till then use this: |
| 12:11.49 | Ashish101 | ?? |
| 12:11.50 | Ashish101 | What |
| 12:11.59 | Ashish101 | Yes and its just 6 PM in here |
| 12:12.22 | GrantMercer015 | BRL-CAD Cross Reference, google it and look for brlcad.org/xref/ along those lines |
| 12:12.36 | GrantMercer015 | the server doesnt work over in japan so i cant give the exact link |
| 12:13.11 | Ashish101 | Japan :P |
| 12:13.23 | Ashish101 | U hv any site ?? blog ?>?? |
| 12:13.42 | GrantMercer015 | but the site searches brlcad source for specific keywords(identifier search), if you want to find any function declaration or varaibles search on the site |
| 12:13.50 | GrantMercer015 | No site or blog |
| 12:14.31 | Ashish101 | visit mine @ ashtricks.com |
| 12:14.33 | GrantMercer015 | found a link, nevermind. http://brlcad.org/xref/ident |
| 12:21.46 | *** join/#brlcad Silvrous (4f706699@gateway/web/freenode/ip.79.112.102.153) |
| 13:09.12 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.63.216) |
| 13:10.17 | *** join/#brlcad Silvrous (4f706699@gateway/web/freenode/ip.79.112.102.153) |
| 13:52.03 | *** join/#brlcad Cheeku (Cheeku@14.98.242.20) |
| 14:03.41 | *** join/#brlcad Cheeku (Cheeku@14.98.242.20) |
| 14:03.41 | *** part/#brlcad Cheeku (Cheeku@14.98.242.20) |
| 14:29.59 | *** join/#brlcad Al_Da_Best (Al_Da_Best@cpc2-shep12-2-0-cust21.8-3.cable.virginmedia.com) |
| 14:32.10 | *** join/#brlcad M0J0E (~johannes@p4FDFAF31.dip.t-dialin.net) |
| 14:35.23 | *** join/#brlcad maths22 (328d9f4a@gateway/web/freenode/ip.50.141.159.74) |
| 14:36.40 | maths22 | brlcad: crit.brlcad.org does not have a necessary php extention enabled: hash |
| 14:59.05 | *** join/#brlcad harmanpreet (~chatzilla@124.253.28.117) |
| 15:05.24 | brlcad | harmanpreet: hello |
| 15:05.35 | harmanpreet | hi.. |
| 15:10.28 | *** join/#brlcad andrei (~andrei@188.25.158.113) |
| 15:20.49 | caen23 | brlcad: how can i change the way xmllint is called when validating docbooks? |
| 15:31.28 | brlcad | caen23: what's up? |
| 15:31.55 | caen23 | brlcad: i need to add a flag to the invocation so that it can build |
| 15:32.35 | caen23 | there's a line <xi:include href="man.macros"> that generates an error, and this seems to be the solution: https://lists.oasis-open.org/archives/docbook-apps/200509/msg00089.html |
| 15:39.49 | brlcad | caen23: shouldn't that be <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href=... |
| 15:40.21 | caen23 | hmm… let me try |
| 15:41.29 | Notify | 03GCI: Sean has left the following comment at Convert 38 src/fb man pages to valid Docbook http://www.google-melange.com/gci/task/view/google/gci2012/8030204: Task Closed Congratulations, this task has been completed successfully. |
| 15:41.30 | Notify | 03GCI: javamonn has left the following comment at Model a "C" using BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2012/7971228: Changes... Reworked the model, changed the orientation of the model, and changed the order in which the shaders were applied. Let me know if any further changes should be made. Thanks, Daniel |
| 15:41.31 | Notify | 03GCI: Sean has left the following comment at Convert 38 src/fb man pages to valid Docbook http://www.google-melange.com/gci/task/view/google/gci2012/8030204: keep it up! Nice work, thanks. You have been credited with this contribution in our authorship documentation. |
| 15:41.32 | Notify | 03GCI: Sean has left the following comment at Decouple LIBDM from LIBGED http://www.google-melange.com/gci/task/view/google/gci2012/8017204: wow, perfect That's perfect, Cezar -- *exactly* what I was looking for, couldn't have done it better myself. |
| 15:41.33 | Notify | 03GCI: javamonn has left the following comment at Model a "C" using BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2012/7971228: Ready for review The work on this task is ready to be reviewed. |
| 15:41.34 | Notify | 03GCI: Sean has left the following comment at Decouple LIBDM from LIBGED http://www.google-melange.com/gci/task/view/google/gci2012/8017204: Task Closed Congratulations, this task has been completed successfully. |
| 15:41.35 | Notify | 03GCI: Cezar has left the following comment at Convert src/util manual pages to Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7970249: Task Claimed I would like to work on this task. |
| 15:41.36 | Notify | 03GCI: Harmanpreet Singh has left the following comment at Convert src/util manual pages to Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7970249: Task Assigned This task has been assigned to Cezar. You have 48 hours to complete this task, good luck! |
| 15:41.37 | Notify | 03GCI: Sean has left the following comment at Find and fix at least 10 spelling mistakes in at least 10 different files http://www.google-melange.com/gci/task/view/google/gci2012/7959223: what are you doing? Sean, you've claimed and unclaimed a task too many times today. What are you doing? Please commit to a task for more than a couple minutes. |
| 15:41.38 | Notify | 03GCI: Sean has left the following comment at Model a "C" using BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2012/7971228: looking better That's looking much better but you went from too much cut out of the C to too little. Look at the C's in the font on this page even (your "Changes..." for example). Notice how the C is cut around 1:30 and 5:30 on the face of a clock and cut at an angle. |
| 15:41.39 | Notify | You... |
| 15:41.40 | Notify | 03GCI: Sean has left the following comment at Model a "C" using BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2012/7971228: Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. |
| 15:41.41 | Notify | 03GCI: Sean has left the following comment at Add a primitive surface area function ... for polyhedron with 4 to 8 sides (ARB8) http://www.google-melange.com/gci/task/view/google/gci2012/8028203: lots of math routines There are lots of matrix macros in include/vmath.h and other matrix functions throughout the libbn library (see include/bn.h or src/libbn/*.c). As for the patch itself, be sure to read it with |
| 15:41.42 | Notify | a... |
| 15:41.43 | Notify | 03GCI: Sean has left the following comment at Add a primitive surface area function ... for polyhedron with 4 to 8 sides (ARB8) http://www.google-melange.com/gci/task/view/google/gci2012/8028203: Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the... |
| 15:41.44 | Notify | 03GCI: Christopher Su has left the following comment at Create a technical screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8022221: Task Claimed I would like to work on this task. |
| 15:41.45 | Notify | 03GCI: Sean Bashaw has left the following comment at Find and fix at least 10 spelling mistakes in at least 10 different files http://www.google-melange.com/gci/task/view/google/gci2012/7959223: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 15:41.46 | Notify | 03GCI: Sean Bashaw has left the following comment at Close MGED when both windows are closed http://www.google-melange.com/gci/task/view/google/gci2012/7945212: Task Claimed I would like to work on this task. |
| 15:41.47 | Notify | 03GCI: Moin Nadeem has left the following comment at Set up Jenkins continuous integration for BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2012/7952233: Ready for review The work on this task is ready to be reviewed. |
| 15:41.48 | Notify | 03GCI: javamonn has left the following comment at Model a "C" using BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2012/7971228: Ready for review The work on this task is ready to be reviewed. |
| 15:41.48 | brlcad | may need an xpointer=... element too |
| 15:41.49 | Notify | 03GCI: Sean Bashaw has left the following comment at Close MGED when both windows are closed http://www.google-melange.com/gci/task/view/google/gci2012/7945212: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 15:41.50 | Notify | 03GCI: Sean Bashaw has left the following comment at Convert 24 other man pages to valid Docbook http://www.google-melange.com/gci/task/view/google/gci2012/8005210: Task Claimed I would like to work on this task. |
| 15:41.51 | Notify | 03GCI: Cezar has left the following comment at Convert src/util manual pages to Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7970249: Ready for review The work on this task is ready to be reviewed. |
| 15:41.52 | Notify | 03GCI: Melange has left the following comment at Add missing documentation (for any ONE command) http://www.google-melange.com/gci/task/view/google/gci2012/7972228: Initial Deadline passed Melange has detected that the initial deadline has passed and it has set the task status to ActionNeeded. The student has 24 hours to submit the work before the task is reopened and sent back to the pool for other students |
| 15:41.53 | Notify | to... |
| 15:41.54 | Notify | 03GCI: Skriptkid has left the following comment at Add a primitive surface area function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7983225: Fixed Fixed everything you said. I had used 'major' and 'minor' as variable names first. I saw in ell.c that they are defines as macros in some systems, so I undefined them :) |
| 15:41.55 | Notify | 03GCI: Skriptkid has left the following comment at Add a primitive surface area function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7983225: Ready for review The work on this task is ready to be reviewed. |
| 15:41.56 | Notify | 03GCI: bwannow has left the following comment at Find and fix at least 10 spelling mistakes in at least 10 different files http://www.google-melange.com/gci/task/view/google/gci2012/7959223: Task Claimed I would like to work on this task. |
| 15:41.57 | Notify | 03GCI: bwannow has left the following comment at Find and fix at least 10 spelling mistakes in at least 10 different files http://www.google-melange.com/gci/task/view/google/gci2012/7959223: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 15:41.58 | Notify | 03GCI: Skriptkid has left the following comment at Add a primitive surface area function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7983225: Points Are the Surface Area tasks also 1-point tasks? |
| 15:41.59 | Notify | 03GCI: Sean has left the following comment at Add a primitive surface area function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7983225: what do you mean? We know that those are some of the hardest tasks posted. If you know of a good way to break up the work into multiple sub-tasks, we can do that, but "points" won't matter beyond the first 3 so long as |
| 15:42.00 | Notify | you... |
| 15:42.01 | Notify | 03GCI: Sean has left the following comment at Model a "C" using BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2012/7971228: Task Closed Congratulations, this task has been completed successfully. |
| 15:42.02 | Notify | 03GCI: Sean has left the following comment at Model a "C" using BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2012/7971228: revisions Very nice work javamonn! Took a few revisions, but that looks great now. |
| 15:42.03 | Notify | 03GCI: Skriptkid has left the following comment at Add a primitive surface area function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7983225: Hyp3 hyp3.patch is the final one. |
| 15:42.04 | Notify | 03GCI: Sean has left the following comment at Set up StatSVN http://www.google-melange.com/gci/task/view/google/gci2012/8013211: Deadline extended The deadline of the task has been extended with 2 days and 0 hours. |
| 15:42.05 | Notify | 03GCI: Sean has left the following comment at Create a technical screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8022221: Task Assigned This task has been assigned to Christopher Su. You have 48 hours to complete this task, good luck! |
| 15:42.06 | Notify | 03GCI: Su Chang ko has left the following comment at Set up StatSVN http://www.google-melange.com/gci/task/view/google/gci2012/8013211: Ready for review The work on this task is ready to be reviewed. |
| 15:42.07 | Notify | 03GCI: Sean has left the following comment at Implement a primitive centroid function ... for polyhedron with 4 to 8 sides (ARB8) http://www.google-melange.com/gci/task/view/google/gci2012/7959221: it's alright You don't have to apologize. ;) Thank you for your interest. If you (or anyone else) would like to try again, the task is still available to be claimed. |
| 15:42.08 | Notify | 03GCI: Sean has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: Deadline extended The deadline of the task has been extended with 1 days and 0 hours. |
| 15:42.09 | Notify | 03GCI: Cezar has left the following comment at Convert src/util manual pages to Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7970249: Commit r53940 Commit r53940 |
| 15:42.10 | Notify | 03GCI: Sean has left the following comment at Convert 24 other man pages to valid Docbook http://www.google-melange.com/gci/task/view/google/gci2012/8005210: Task Assigned This task has been assigned to Sean Bashaw. You have 48 hours to complete this task, good luck! |
| 15:42.11 | Notify | 03GCI: Sean has left the following comment at Convert src/util manual pages to Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7970249: Task Closed Congratulations, this task has been completed successfully. |
| 15:42.12 | Notify | 03GCI: Cezar has left the following comment at Convert remaining manual pages to Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7960234: Task Claimed I would like to work on this task. |
| 15:42.13 | Notify | 03GCI: Sean has left the following comment at Convert remaining manual pages to Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7960234: Task Assigned This task has been assigned to Cezar. You have 48 hours to complete this task, good luck! |
| 15:42.14 | Notify | 03GCI: Sean has left the following comment at Reorganize MGED menu http://www.google-melange.com/gci/task/view/google/gci2012/8030206: Deadline extended The deadline of the task has been extended with 2 days and 0 hours. |
| 15:42.15 | brlcad | oof |
| 15:42.15 | Notify | 03GCI: Sean has left the following comment at Reorganize MGED menu http://www.google-melange.com/gci/task/view/google/gci2012/8030206: on the right track You are definitely on the right track. That's looking fantastic. I noticed you expanded to some panels -- if you like, you can keep those separate and we can turn them into another task. It's enough work to just focus on the menus, no? :) |
| 15:42.16 | Notify | 03GCI: Sean has left the following comment at Compile BRL-CAD on Windows using Cygwin http://www.google-melange.com/gci/task/view/google/gci2012/7972239: sorry Sorry, I can't help you with Cygwin installation issues. That's beyond the scope of this task and, more importantly, I'm not familiar with what those issues are. ;) |
| 15:42.17 | Notify | 03GCI: Melange has left the following comment at Find and fix at least 20 spelling mistakes in at least 5 different files http://www.google-melange.com/gci/task/view/google/gci2012/8033204: Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. |
| 15:42.18 | Notify | 03GCI: Ashish has left the following comment at Reorganize MGED menu http://www.google-melange.com/gci/task/view/google/gci2012/8030206: Ya Sure I will do that only In this way i can get 2 tasks in one shot Can this happen ?? |
| 15:42.19 | Notify | 03GCI: Shayantan has left the following comment at Create an RTWizard screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8034204: Ready for review The work on this task is ready to be reviewed. |
| 15:42.20 | Notify | 03GCI: Melange has left the following comment at Design a "Commercial CAD Comparison" diagram http://www.google-melange.com/gci/task/view/google/gci2012/7974231: No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. |
| 15:42.21 | Notify | 03GCI: Deep Inder Singh has left the following comment at Model BRL-CAD logo in BRL-CAD (alan one) http://www.google-melange.com/gci/task/view/google/gci2012/7994225: Task Claimed I would like to work on this task. |
| 15:42.22 | Notify | 03GCI: Harmanpreet Singh has left the following comment at Model BRL-CAD logo in BRL-CAD (alan one) http://www.google-melange.com/gci/task/view/google/gci2012/7994225: Task Assigned This task has been assigned to Deep Inder Singh. You have 48 hours to complete this task, good luck! |
| 15:42.23 | Notify | 03GCI: Monika has left the following comment at Find and fix at least 10 spelling mistakes in at least 10 different files http://www.google-melange.com/gci/task/view/google/gci2012/7959223: Task Claimed I would like to work on this task. |
| 15:42.24 | Notify | 03GCI: Johannes Schulte has left the following comment at Add a primitive surface area function ... for triangle meshes (BOT) http://www.google-melange.com/gci/task/view/google/gci2012/7968224: Task Claimed I would like to work on this task. |
| 15:42.25 | Notify | 03GCI: Harmanpreet Singh has left the following comment at Add a primitive surface area function ... for triangle meshes (BOT) http://www.google-melange.com/gci/task/view/google/gci2012/7968224: Task Assigned This task has been assigned to Johannes Schulte. You have 72 hours to complete this task, good luck! |
| 15:42.26 | Notify | 03GCI: Deep Inder Singh has left the following comment at Model BRL-CAD logo in BRL-CAD (alan one) http://www.google-melange.com/gci/task/view/google/gci2012/7994225: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 15:42.27 | Notify | 03GCI: Harmanpreet Singh has left the following comment at Find and fix at least 10 spelling mistakes in at least 10 different files http://www.google-melange.com/gci/task/view/google/gci2012/7959223: Task Assigned This task has been assigned to Monika. You have 48 hours to complete this task, good luck! |
| 15:42.28 | Notify | 03GCI: Johannes Schulte has left the following comment at Add a primitive surface area function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7983225: little corerction for better understanding the contest I just saw this comments and wanted to say, that, afaik, points do also count after the 3 for the T-Shirt, because you, as the organization, can choose |
| 15:42.29 | Notify | the... |
| 15:42.30 | Notify | 03GCI: Donny Mitsov has left the following comment at Create geometry database with one of every primitive http://www.google-melange.com/gci/task/view/google/gci2012/7985226: Ready for review The work on this task is ready to be reviewed. |
| 15:42.31 | Notify | 03GCI: Gmercer015 has left the following comment at Make mged 'tables' command not call system() http://www.google-melange.com/gci/task/view/google/gci2012/8007219: Time Extension Could i receive another time extension please? I've spent to much time to let go of this project, i just need to finish this one up(only a little more, i promise!). The time difference is to far to be able to communicate with the... |
| 15:42.32 | Notify | 03GCI: Harmanpreet Singh has left the following comment at Make mged 'tables' command not call system() http://www.google-melange.com/gci/task/view/google/gci2012/8007219: Deadline extended The deadline of the task has been extended with 1 days and 0 hours. |
| 15:42.33 | Notify | 03GCI: Gmercer015 has left the following comment at Make mged 'tables' command not call system() http://www.google-melange.com/gci/task/view/google/gci2012/8007219: Disregard my first question I fixed the function to mimic the sort unix command exactly, never mind the question about my qsort! I couldn't find an edit button on my main post so i left this reply |
| 15:42.34 | Notify | 03GCI: Silvrous has left the following comment at Add a primitive surface area function ... for polyhedron with 4 to 8 sides (ARB8) http://www.google-melange.com/gci/task/view/google/gci2012/8028203: got it Those were just what I was looking for, I think I've got it now. As for the INSTALL, I have no idea why the change appeared, all I did was compile and then delete the .build folder. |
| 15:42.35 | Notify | 03GCI: cheekujodhpur has left the following comment at Upgrade Mediawiki website http://www.google-melange.com/gci/task/view/google/gci2012/7974236: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 15:42.36 | Notify | 03GCI: Silvrous has left the following comment at Add a primitive surface area function ... for polyhedron with 4 to 8 sides (ARB8) http://www.google-melange.com/gci/task/view/google/gci2012/8028203: u^1^2 In the u miu X u miu matrix, what does (u^1)^2 and (u^2)^2 mean? |
| 15:42.37 | Notify | 03GCI: Melange has left the following comment at Set up Jenkins continuous integration for BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2012/7952233: No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. |
| 15:42.38 | Notify | 03GCI: Silvrous has left the following comment at Add a primitive surface area function ... for polyhedron with 4 to 8 sides (ARB8) http://www.google-melange.com/gci/task/view/google/gci2012/8028203: Tensor product! Disregard that, I've just figured it out. |
| 15:42.39 | Notify | 03GCI: Silvrous has left the following comment at Add a primitive surface area function ... for polyhedron with 4 to 8 sides (ARB8) http://www.google-melange.com/gci/task/view/google/gci2012/8028203: typo? In the tensor product, should that be u or umiu? |
| 15:42.40 | Notify | 03GCI: Jacob B has left the following comment at Upgrade Drupal website http://www.google-melange.com/gci/task/view/google/gci2012/7958216: Cannot Continue crit.brlcad.org does not have a necessary PHP extention enabled: hash. Drupal 7 does not run without that extension. |
| 15:42.41 | Notify | 03GCI: Angelyn has left the following comment at Create an ISST screenshot or animation http://www.google-melange.com/gci/task/view/google/gci2012/7945221: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 15:42.42 | Notify | 03GCI: Sean has left the following comment at Reorganize MGED menu http://www.google-melange.com/gci/task/view/google/gci2012/8030206: sure It can happen. Just make sure you submit all the menu changes for this one and then claim the panels one that will be published after this one is closed. |
| 15:42.43 | brlcad | waits for the noise to subside |
| 15:42.43 | Notify | 03GCI: Sean has left the following comment at Create an RTWizard screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8034204: Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once you re-submit your work. |
| 15:42.44 | Notify | 03GCI: Sean has left the following comment at Create an RTWizard screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8034204: that's not rtwizard You made a screenshot of 'mged', but that's the wrong application. This task specifies making a screenshot of the 'rtwizard' tool. That's a different application. You'll also want something a little more interesting than a cylinder.. ;) |
| 15:42.45 | Notify | 03GCI: bWVsYW5nZS5jb20vZ2NpL3Rhc2svdmlldy9nb29nbGUvZ2NpMjAxMi83OTQ1MjIwOg0KDQoNCkNv bXBpbGUgZmFpbHMNCg0KDQpJIHN1Ym1pdCBhIHRleHQgZmlsZSB3aXRoIGxvZ3MgYW5kIGluZm9y bWF0aW9uLiBUaGUgZmlyc3QgbG9nIGlzIHRoZSBDTWFrZSAgDQpnZW5lcmF0b3IgbG9nLiBUaGUg c2Vjb25kIGxvZyBpcyB0aGUgbmV4dCBDTWFrZSBsb2cuIFRoZSB0aGlyZCBsb2cgaXMgdGhlICAN Cm1pbmd3MzItbWFrZS4gRmFpbHMgaW4gYSBwYXJ0IG9mIHRoZSBjb21waWxhdGlvbi4NCg0KDQpH... |
| 15:42.46 | Notify | 03GCI: bWVsYW5nZS5jb20vZ2NpL3Rhc2svdmlldy9nb29nbGUvZ2NpMjAxMi83OTQ1MjIwOg0KDQoNClJl YWR5IGZvciByZXZpZXcNCg0KVGhlIHdvcmsgb24gdGhpcyB0YXNrIGlzIHJlYWR5IHRvIGJlIHJl dmlld2VkLg0KDQoNCkdyZWV0aW5ncywNClRoZSBHb29nbGUgT3BlbiBTb3VyY2UgUHJvZ3JhbXMg VGVhbQ0KDQoNCi0tLQ0KWW91IGFyZSByZWNlaXZpbmcgdGhpcyBtZXNzYWdlIGJlY2F1c2UgeW91 IGFyZSBzdWJzY3JpYmVkIHRvIENvbXBpbGUgIA0KQlJMLUNBRCB1c2luZyBEZXYtQysrLg0KVG8g... |
| 15:42.47 | Notify | 03GCI: Andrei Tudorica has left the following comment at Create prototype 2D CAD drawing(s) http://www.google-melange.com/gci/task/view/google/gci2012/7985229: Task Claimed I would like to work on this task. |
| 15:42.49 | Notify | 03GCI: Sean has left the following comment at Add a primitive surface area function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7983225: how's that a correction? Johannes, how is that different than what I said? Points won't matter SO LONG AS YOU MAKE IT INTO THE TOP-FIVE. If a student completed 10 surface area functions and another student completed 40... |
| 15:43.50 | *** join/#brlcad jasleen (~chatzilla@117.253.232.243) |
| 15:45.16 | ``Erik | you're the one who didn't want quelling on long buffers :D |
| 15:45.32 | brlcad | you didn't see my message the other day then :P |
| 15:46.30 | ``Erik | nope, been fairly busy the last few days |
| 15:46.35 | brlcad | would be nice if those gci tasks were more concise, wordy as all hell |
| 15:46.55 | ``Erik | and getting ready to head back out soon, looking for a tree |
| 15:47.14 | ``Erik | I was thinking about chopping the messages up a little, or adding better parsing or something |
| 15:47.16 | *** part/#brlcad jasleen (~chatzilla@117.253.232.243) |
| 15:47.53 | *** join/#brlcad Skriptkid (~Skriptkid@117.202.63.216) |
| 15:47.54 | brlcad | GCI: Andrei Tudorica * ld like to work on this task. |
| 15:47.58 | brlcad | oops |
| 15:48.20 | Notify | 03GCI: Lolacio has left the following comment at Find and fix at least 20 spelling mistakes in at least 5 different files http://www.google-melange.com/gci/task/view/google/gci2012/8033204: Task Claimed I would like to work on this task. |
| 15:48.32 | brlcad | GCI: Andrei Tudorica * Create prototype 2D CAD drawing(s) (http://www.google-melange.com/gci/task/view/google/gci2012/7985229): ... message ... |
| 15:48.41 | brlcad | something like that |
| 15:49.16 | brlcad | ``Erik: and it seems to have some off-by-one-word error |
| 15:49.18 | brlcad | 10:42 < Notify> the... |
| 15:49.25 | ``Erik | https://github.com/erikg/cl-cia/blob/master/maildir.lisp #'do-gci-email ( starts at #'process-brlcad-gci-mail-dir ), let me know when ya have the pull request ;) |
| 15:49.38 | ``Erik | yes, I just fixed that one while it was clearing the queue |
| 15:49.47 | brlcad | smells a gci task |
| 15:49.55 | Notify | 03GCI: Skriptkid has left the following comment at Add a primitive surface area function ... for hyperboloids of one sheet (HYP) http://www.google-melange.com/gci/task/view/google/gci2012/7983225: Got It Just wanted to know. Because I was seeing last year's tasks list and I saw that some tasks had more than 1 point. So just asked. |
| 15:49.59 | *** join/#brlcad Ashish101 (75c2231a@gateway/web/freenode/ip.117.194.35.26) |
| 15:50.15 | Ashish101 | @brlcad: you there ?? |
| 15:50.25 | ``Erik | if you can find a lithp weenie to do it, I don't care where the pull request comes from O.o but we're heading out the door in a minute, so'z *shrug* |
| 15:51.01 | Ashish101 | I want to know where can i find the functionalities of stuuf located in settings tab of Mged |
| 15:51.05 | ``Erik | mebbe a cl-ppcre replacement bit to shrink it, or a rfc2388-binary split of the mime types and a closure-html parse of the html version to break it to the important parts |
| 15:54.24 | ``Erik | (btw, haven't seen a commit msg for bz yet) |
| 15:57.05 | Notify | 03GCI: Johannes Schulte has left the following comment at Add a primitive surface area function ... for triangle meshes (BOT) http://www.google-melange.com/gci/task/view/google/gci2012/7968224: Some Questions As the first draw is now ready, I have some questions: 1. Where should the function be placed (just at the end of bot.c?) and how should it be called? 2. How should the result be... |
| 16:02.30 | Ashish101 | NO one is online that can be of some help !! ... Any idea when brlcad come online ?? |
| 16:03.59 | andrei | He was around several minutes ago, just ask him what you want to ask |
| 16:04.06 | Ashish101 | I asked |
| 16:04.13 | Ashish101 | Above but no replys !! :( |
| 16:04.37 | andrei | <Ashish101> @brlcad: you there ?? |
| 16:04.38 | andrei | <Ashish101> I want to know where can i find the functionalities of stuuf located in settings tab of Mged |
| 16:06.39 | andrei | you should try to be more specific, often it's better to say what you want to do and not how you want to do it when you ask for help. He isn't answering because he is probably busy, but he will answer your question :) |
| 16:07.14 | *** join/#brlcad SkriptAk (~Skriptkid@117.202.63.216) |
| 16:08.15 | Notify | 03GCI: Andrei Popescu has left the following comment at Create prototype 2D CAD drawing(s) http://www.google-melange.com/gci/task/view/google/gci2012/7985229: Task Assigned This task has been assigned to Andrei Tudorica. You have 48 hours to complete this task, good luck! |
| 16:09.00 | Notify | 03GCI: Andrei Popescu has left the following comment at Find and fix at least 20 spelling mistakes in at least 5 different files http://www.google-melange.com/gci/task/view/google/gci2012/8033204: Task Assigned This task has been assigned to Lolacio. You have 48 hours to complete this task, good luck! |
| 16:14.39 | *** join/#brlcad elf` (~elf11_@92.80.1.188) |
| 16:21.34 | *** join/#brlcad Lolacio (5bb018fd@gateway/web/freenode/ip.91.176.24.253) |
| 16:47.42 | *** join/#brlcad Silvrous (4f706699@gateway/web/freenode/ip.79.112.102.153) |
| 16:50.22 | M0J0E | As I don't want to spam this channel with unnecessary long posts, I think it is the best to just post the link to my task, where I also posted my questions, concerning this task : http://www.google-melange.com/gci/task/view/google/gci2012/7968224. Thank you in advance! |
| 16:59.27 | *** join/#brlcad Ashish101 (75c2231a@gateway/web/freenode/ip.117.194.35.26) |
| 17:05.20 | Notify | 03GCI: Shayantan has left the following comment at Create an RTWizard screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8034204: Help When Im Starting Rt Wizard THey Say I NEed Some Kind of database . sir plz help |
| 17:09.22 | Ashish101 | @belcad: u there ?? |
| 17:18.51 | Silvrous | I have a problem with a variable. I declared a mat_t object, but when I try to use it, such as M_AT[0][0]=1, I get error: subscripted value is neither array nor pointer |
| 17:22.37 | andrei | Silvrous, you re probably reffering to a structure |
| 17:23.45 | Silvrous | sorry, yes. I just realized, the mat_t is defined as a 1D array, isn't it? |
| 17:24.02 | andrei | I need to have a look at the code, what file are you working with |
| 17:24.04 | andrei | ( path) |
| 17:24.46 | Silvrous | it's defined in /include/vmath.h |
| 17:25.39 | Silvrous | I'm working on /src/librt/primitives/arb8/arb8.c , but there's no other mat_t's used there. |
| 17:25.47 | andrei | typedef fastf_t mat_t[ELEMENTS_PER_MAT]; |
| 17:26.03 | andrei | as far as I know fastf_t is a primitive(similar to float) |
| 17:26.47 | andrei | mat_t should be a matrix, I m trying to find a usage example |
| 17:28.07 | Silvrous | Yes, that's what I'm trying to use it for. I assumed it was indexed as [][], but from what I see, it's just linear with a rule for the element placement. |
| 17:30.35 | andrei | you can use it as mat_t [] and it works |
| 17:31.27 | Notify | 03GCI: Gala has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: Unclaiming Article Task Hi Sean and Harmanpreet, I think I must be in over my head. :) I think everyone has been really nice and helpful and patient, but I have basically spent a week on this one project, and I do not seem to... |
| 17:31.32 | Notify | 03GCI: Gala has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 17:31.39 | Silvrous | what is the rule for indexing? line by line, column by column, right? |
| 17:32.30 | brlcad | Ashish101: that tone is not at all helpful |
| 17:32.59 | Ashish101 | KK |
| 17:33.14 | andrei | Silvrous, I didn't manage to find a direct access to the matrix |
| 17:33.18 | brlcad | you need to be patient and respectful if you want anyone to be polite back to you |
| 17:33.26 | andrei | for example, you can print it with bn_mat_print |
| 17:33.46 | Ashish101 | Kk::::... |
| 17:33.46 | brlcad | i'm not the only one that can help you unless you're working on a web task that requires an account be craeted |
| 17:34.31 | andrei | Silvrous: the prototype is bn_mat_print("string - description", mat_t); |
| 17:35.10 | brlcad | ``Erik: I'll make a bzflag commit in a few, but was just expecting notify to be joined and start chirping ;) |
| 17:35.51 | Silvrous | Thanks. What I need though is to create one from scratch. |
| 17:36.27 | brlcad | Ashish101: and andrei DID help you -- you did not actually ask a question |
| 17:36.38 | brlcad | "I want to know where can i find the functionalities of stuuf located in settings tab of Mged" is not a question |
| 17:36.42 | brlcad | I want a puppy |
| 17:36.53 | Ashish101 | :P |
| 17:37.06 | brlcad | I'm serious, IRC does not tolerate this |
| 17:37.20 | brlcad | please read http://brlcad.org/wiki/IRC and ... |
| 17:37.21 | brlcad | ~ask |
| 17:37.22 | ibot | Questions in the channel should be specific, informative, complete, concise, and on-topic. Don't ask if you can ask a question first. Don't ask if a person is there; just ask what you intended to ask them. Better questions more frequently yield better answers. We are all here voluntarily or against our will. |
| 17:37.59 | brlcad | after you have done that, come back and ask your question(s) and we'll see if we can give you some help |
| 17:38.20 | andrei | Silvrous: hold on a bit while I find the body of that print function, it might help you understand better how the function works. |
| 17:38.48 | brlcad | please be respectful of other people's time, we're not just sitting here waiting to answer questions that you're capable of researching yourself -- we want to help people who are genuinely interested in contributing to open source |
| 17:39.40 | andrei | Silvrous, I found what you are looking for : /src/libbn/mat.c. Have a look there. |
| 17:39.56 | andrei | let me know if anything is unclear after that. |
| 17:40.28 | brlcad | andrei: nice, that comment should be moved |
| 17:40.33 | brlcad | (to vmath.h) |
| 17:40.57 | Ashish101 | Q- "What does the Function in Settings>transform>adc " Actually do .. |
| 17:41.20 | brlcad | "adc" is our "angle distance cursor" |
| 17:41.26 | Silvrous | andrei: Thanks a lot! |
| 17:41.38 | brlcad | it's an expert interface for measuring angles and distances for displayed geometry |
| 17:41.59 | brlcad | I believe there is a write-up about the ADC in our tutorial documentation on the website |
| 17:42.06 | Ashish101 | thanks |
| 17:42.27 | andrei | brlcad: you mean the bn_mat_print func prototype? |
| 17:42.51 | Silvrous | I've also found a problem in the brl-cad cross reference http://brlcad.org/xref/search the search always gives return value 2 |
| 17:42.55 | brlcad | andrei: no, the comment at the top of mat.c |
| 17:43.01 | brlcad | it explains the layout of a mat_t |
| 17:44.09 | andrei | ah, I ll move it now then. |
| 17:45.08 | brlcad | notes the first /** @} */ |
| 17:45.13 | brlcad | is wrong .. should be removed |
| 17:45.26 | brlcad | there's one at the bottom of the file |
| 17:46.37 | andrei | Shouldn't I keep the first one and remove the last one ? |
| 17:46.40 | brlcad | Ashish101: and there's no way you read that entire IRC page in 2min before asking our question -- you do that at your own risk |
| 17:46.54 | brlcad | no, remove first, keep last |
| 17:47.23 | brlcad | the whole file gets wrapped in addtogroup mat { ... } so that it captures any implementation /** */ doxygen comments |
| 17:47.43 | brlcad | and there are a few in there, so it should be kept |
| 17:48.06 | brlcad | if there weren't any, then you could remove the addtogroup mat and { and } lines |
| 17:48.38 | brlcad | andrei: note that the TODO comment has nothing to do with a mat_t :) |
| 17:48.47 | Notify | 03GCI: John has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: Task Claimed I would like to work on this task. |
| 17:48.49 | andrei | yes, now I realised what you actually wanted me to move |
| 17:49.09 | andrei | starting from here : /** @file libbn/mat.c |
| 17:49.15 | Ashish101 | I just read this section -- which according to all of you is important for me !--- IRC Etiquette :) |
| 17:50.53 | brlcad | that is the more important section, but you should read the whole page and read the page about "How to Ask Questions the Smart Way" |
| 17:51.52 | brlcad | you'll get much more and much better help that way |
| 17:52.23 | brlcad | harmanpreet: would you like a reply here or on irc? |
| 17:52.36 | brlcad | bah, here or e-mail |
| 17:53.42 | harmanpreet | brlcad: anywhere you think more suitable. |
| 17:53.52 | Notify | 03GCI: Andrei Popescu has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: Task Assigned This task has been assigned to John. You have 72 hours to complete this task, good luck! |
| 17:54.14 | brlcad | harmanpreet: I believe in open communications so long as it protects individual privacy where needed, so we can talk about it here ;) |
| 17:54.30 | brlcad | the task is not a personal matter |
| 17:54.30 | harmanpreet | brlcad: sure |
| 17:55.04 | brlcad | so I actually told him to uncheck the textures, because I consider our support overly primitive compared to other systems |
| 17:55.47 | brlcad | we can do texturing but our uv parameterization is not configurable, some objects can't be textured (like meshes!), and textures must be in raw pix format |
| 17:55.59 | brlcad | that's too many caveats |
| 17:56.18 | brlcad | we do, however, have extrusions |
| 17:56.24 | brlcad | not the extrude command, but actual objects |
| 17:56.34 | brlcad | if you import a dxf with a 2D sketch, you can extrude that |
| 17:56.46 | brlcad | http://brlcad.org/tmp/primitives/Primitives3_grouped_labels.png |
| 17:57.44 | brlcad | as for the task, hopefully the student has learned something from the exercise |
| 17:58.05 | harmanpreet | even I too :) |
| 17:58.33 | brlcad | I don't trust the commercial checks entirely, but the big-picture passes a sanity check |
| 17:59.14 | brlcad | so still I leave it up to you to decide if he's done |
| 17:59.26 | *** join/#brlcad bhlegm (~bhlegm@d108-180-27-19.bchsia.telus.net) |
| 17:59.31 | brlcad | he's certainly put more than 2 hours into the project and that's the general guideline |
| 17:59.37 | brlcad | bhlegm: howdy! |
| 17:59.47 | bhlegm | hi :) |
| 18:00.02 | harmanpreet | so he deserves acceptance... :) |
| 18:00.10 | caen23 | brlcad: i think i've completed the "convert remaining man pages" task, plus validation, but i haven't removed the man pages from the src/, because when i tried to, i kept breaking something. for some folders, it's easy, but others are more involving, and i haven't quite figured out how to properly remove the docs from those |
| 18:00.15 | andrei | brlcad: sorry to hop in the middle of the discussion but would it seem unreasonable to complete that task and open another task to correct the remaining/potential issues ? |
| 18:00.26 | harmanpreet | brlcad: but am really feeling bad for Gala.. :( |
| 18:00.38 | brlcad | why's that? |
| 18:01.00 | brlcad | caen23: what breakage? |
| 18:01.43 | brlcad | andrei: it depends, but in general I do not think that is unreasonable IF they've put more than two hours of effort in |
| 18:01.58 | brlcad | i.e., implying that the scope was misjudged |
| 18:02.14 | brlcad | harmanpreet: which one is gala? |
| 18:02.52 | harmanpreet | student recently working on http://www.google-melange.com/gci/task/view/google/gci2012/7945213 |
| 18:03.00 | andrei | brlcad: the one that had to write the news article : http://www.google-melange.com/gci/task/view/google/gci2012/7945213 |
| 18:03.06 | andrei | ah, sorry |
| 18:03.19 | harmanpreet | yeah.. |
| 18:04.13 | brlcad | harmanpreet: ah, that gala -- so what you can do is create a task just for him/her that is to just interview jordi |
| 18:04.33 | brlcad | I can publish it and we can try to get them to claim it |
| 18:05.07 | brlcad | howdy starseeker ;) |
| 18:05.18 | harmanpreet | that's nice :) |
| 18:05.21 | starseeker | brlcad: hmm? |
| 18:05.25 | andrei | wasn't that task already published? I think I have seen that one before |
| 18:05.26 | starseeker | reads backlog |
| 18:06.01 | brlcad | starseeker: nothing, just saying hi :) |
| 18:06.06 | Notify | 03GCI: Silvrous has left the following comment at Add a primitive surface area function ... for polyhedron with 4 to 8 sides (ARB8) http://www.google-melange.com/gci/task/view/google/gci2012/8028203: finally I assumed it was umiu, the other possibility didn't make sense since umiu wouldn't have been used anywhere. areasimple.patch is my old function,now fixed, and areamatrix.patch is the... |
| 18:06.23 | brlcad | andrei: it was the same task |
| 18:06.29 | brlcad | interview him and write an article |
| 18:06.38 | brlcad | they interviewed him and posted the interview as the article |
| 18:06.48 | brlcad | replied that wasn't adequate and they let the task go |
| 18:07.04 | andrei | ah, I see. |
| 18:07.31 | Notify | 03GCI: Silvrous has left the following comment at Add a primitive surface area function ... for polyhedron with 4 to 8 sides (ARB8) http://www.google-melange.com/gci/task/view/google/gci2012/8028203: Ready for review The work on this task is ready to be reviewed. |
| 18:08.41 | Notify | 03GCI: Sean has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: clarification John, Since this task was already worked, write your article based on the question+answer responses from Gala's effort and post your article to our CPP. Gala, If you like, we can create a task to just interview Jordi... |
| 18:09.34 | brlcad | andrei: where's that bn.h/vmath.h commit? :) |
| 18:09.45 | brlcad | !notify week |
| 18:09.45 | Notify | BRL-CAD: starseeker:36, carlmoore:32, brlcad:23, n_reed:17, jordisayol:7, r_weiss:4, bob1961:4, caen23:4, erikgreenwald:1, d_rossberg:1 |
| 18:09.46 | Notify | BRL-CAD Wiki: Sean:28, Minichrispy:24, Gala:11, Jacksixb:4, 128.63.32.74:3, YolandeskzwvwzbwjStumph:1, Erik:1, 98.234.4.242:1 |
| 18:09.51 | andrei | I m redownloading brlcad from checkout |
| 18:09.54 | brlcad | ah |
| 18:10.06 | andrei | apparently I have plenty other files, and I don t know how I can wipe out any files that aren't included in checkout |
| 18:12.20 | brlcad | svn status | grep '^\?' | xargs rm |
| 18:12.27 | Notify | 03GCI: Harmanpreet Singh has left the following comment at Design a "Commercial CAD Comparison" diagram http://www.google-melange.com/gci/task/view/google/gci2012/7974231: Task Closed Congratulations, this task has been completed successfully. |
| 18:12.45 | brlcad | be very careful with that though as it will delete everything that SVN doesn't recognize which will be any works-in-progress |
| 18:13.35 | brlcad | you can take care of the '?' file not found messages with an | sed 's/\? //g' |
| 18:13.36 | starseeker | brlcad: heh howdy |
| 18:14.00 | starseeker | caen23: don't worry too much about removing the old man pages |
| 18:14.14 | starseeker | caen23: if you like, you can just submit a patch with the new ones |
| 18:14.24 | andrei | <PROTECTED> |
| 18:14.25 | brlcad | he can commit it |
| 18:14.33 | starseeker | yeah, that too |
| 18:15.28 | starseeker | removing the old man pages is a bit involved due to one of the more sophisticated symlink utilizations for BRL-CAD data files |
| 18:15.37 | starseeker | (or can be, at least) |
| 18:15.53 | starseeker | s/involved/confusing |
| 18:16.43 | caen23 | i noticed some components have a doc folder, and it's those i can't really wrap my head around |
| 18:16.58 | starseeker | caen23: can you give an example? |
| 18:17.02 | Notify | 03GCI: John has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: template Sean, is there any pre-defined template for writing the article, or I'm free to choose the layout? |
| 18:17.39 | caen23 | src/other/tcl |
| 18:17.50 | starseeker | scowls at release mode... why does my gentoo box always have to find a new potential uninitialized value usage... |
| 18:17.56 | starseeker | caen23: ah - forget src/other |
| 18:18.17 | starseeker | caen23: those are (mostly) third party codes that we bundle |
| 18:18.27 | starseeker | both for convenience and configuration control |
| 18:19.07 | caen23 | starseeker: ah, alright then. i'll just commit the additions to docbook/system, if that's ok |
| 18:19.14 | starseeker | if you converted those man pages that might actually be an interesting thing for some of the projects, but it's separate from BRL-CAD's man pages |
| 18:19.17 | starseeker | nods |
| 18:20.11 | starseeker | stepcode may be interested in DocBook man pages and the possibilities they represent - would have to ask Mark |
| 18:21.53 | brlcad | new task: https://google-melange.appspot.com/gci/task/view/google/gci2012/7979224 |
| 18:22.37 | brlcad | starseeker: because you have gcc 4.6+ there |
| 18:22.41 | starseeker | brlcad: is this just different compilers seeing different things again? http://pastebin.mozilla.org/1971694 |
| 18:22.53 | starseeker | gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) |
| 18:23.09 | starseeker | gentoo hasn't ported to 4.6+ fully yet |
| 18:23.22 | brlcad | ah, well then there's probably more |
| 18:23.36 | brlcad | unoptimized builds are auto-initialized even though the compiler is not required to do so, optimized builds are not initialized (so you get the warnings) |
| 18:24.12 | starseeker | braces himself and flips up the dsp.c file... |
| 18:24.32 | brlcad | the bigger question is why the logic is written in such a way that it assumes it's zero -- that's usually a potential logic bug elsewhere that is only masked by initalizing to zero |
| 18:25.01 | starseeker | log message at 1186 |
| 18:26.08 | starseeker | I guess the main question then is whether to initialize the structs at 2563 or... ? |
| 18:27.09 | brlcad | if those other warnings are also debug messages, then zero-init is fine |
| 18:27.16 | brlcad | it's if/when any aren't debug |
| 18:28.14 | Notify | 03BRL-CAD:popescuandrei * 53942 brlcad/trunk/src/libbn/mat.c: /* V M A T H . H * BRL-CAD * * Copyright (c) 2004-2012 United States Government as represented by * the U.S. Army Research Laboratory. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public License * version 2.1 as published by the Free Software Foundation. * * This library is |
| 18:28.16 | Notify | distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this file; see the file named COPYING for more * information. */ /** @addtogroup mat */ /** @{ */ |
| 18:28.18 | Notify | /** @file vmath.h * * @brief vector/matrix math * * This header file defines many commonly used 3D vector math macros, * and operates on vect_t, point_t, mat_t, and quat_t objects. * * @brief matrix representation * 4 x 4 Matrix manipulation functions... * * Matrix array elements have the following positions in the matrix: @code * | 0 1 2 3 | | 0 | * [ 0 1 2 3 ] | 4 5 6 7 | | 1 | * | 8 9 10 11 | | 2 | * | 12 13 14 |
| 18:28.20 | Notify | 15... |
| 18:28.38 | brlcad | yay, first commit? |
| 18:28.52 | andrei | yes:) |
| 18:29.09 | starseeker | uh... did the file contents end up in the commit message? |
| 18:29.33 | andrei | I didn't use -m because it was supposed to ask for the message, but for some reason it didn't |
| 18:29.40 | andrei | sorry |
| 18:29.47 | starseeker | ah - phew |
| 18:29.52 | Notify | 03GCI: Ashish has left the following comment at Reorganize MGED menu http://www.google-melange.com/gci/task/view/google/gci2012/8030206: Ready for review The work on this task is ready to be reviewed. |
| 18:29.56 | starseeker | was afraid another subtle notify bug lurked |
| 18:33.57 | Notify | 03GCI: Sean has left the following comment at Create an RTWizard screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8034204: problem with your shift key? Are you having some problem with your shift key? You should only capitalize the first letter of a sentence and proper nouns (someone's name). There are a couple dozen example databases installed within the share/brlcad... |
| 18:37.14 | starseeker | brlcad: 1186 is a debug message, but src/librt/primitives/dsp/dsp.c:1293 doesn't seem to be |
| 18:39.49 | Notify | 03BRL-CAD:starseeker * 53943 brlcad/trunk/src/librt/primitives/dsp/dsp.c: Initialize vars to quell warning in release build mode with gcc 4.5.4 on gentoo linux. |
| 18:39.59 | *** join/#brlcad cristina (~quassel@188.24.75.242) |
| 18:40.22 | starseeker | caen23: which src/other man pages did you convert? |
| 18:40.44 | starseeker | the URToolkit and step directories may be of interest as part of a separate task |
| 18:41.05 | caen23 | it might have been all of them :-? i found them using `find . -name "*.1"` |
| 18:41.11 | starseeker | ah |
| 18:41.34 | starseeker | OK, yeah - save the URToolkit and step files |
| 18:42.01 | starseeker | we manage libutahrle/URToolkit - it's abandoned, so we're the only folks maintaining it now |
| 18:42.17 | starseeker | that means we can do what we want - including DocBook man pages |
| 18:42.50 | starseeker | the step pages as DocBook may appeal to Mark, so hang on to those too - we'll ask him |
| 18:43.21 | caen23 | starseeker: hmm… i'm currently in the final stages of making a commit with all the man's. should i remove something afterwards? |
| 18:43.41 | starseeker | caen23: don't worry - I'll sort it out |
| 18:43.46 | caen23 | thanks :D |
| 18:43.58 | starseeker | go ahead and get it committed, so you can snag another task ;-) |
| 18:44.11 | M0J0E | as I don't want to spam the mailing-list, how long should I wait after posting questions in IRC and under the concerning gci task, till I should post them on the mailing list. And moreover, should I ask these questions via e-mail just my mentors, or the whole mailing list? |
| 18:45.16 | starseeker | MOJOE - unless it's a personal matter like getting an account set up, all communications for open source development should be open |
| 18:45.46 | bhlegm | brlcad |
| 18:45.47 | starseeker | generally people will read the backlogs and address questions as they come up |
| 18:46.28 | bhlegm | can i split my task into transferring gallery2's info to the database that piwigo is supposed to have... |
| 18:46.53 | starseeker | M0J0E: since you posted your questions on your GCI task (which is fine) the thing to do is wait for a GCI reviewer to address them there |
| 18:47.27 | starseeker | M0J0E: you don't have to sit idle - you can always be learning more about BRL-CAD while you're waiting for specific answers |
| 18:47.35 | M0J0E | perfect, thanks. |
| 18:47.48 | Notify | 03BRL-CAD:caen23 * 53944 (brlcad/trunk/doc/docbook/system/man1/en/CMakeLists.txt brlcad/trunk/doc/docbook/system/man3/en/CMakeLists.txt brlcad/trunk/doc/docbook/system/man5/en/CMakeLists.txt): Convert remaining man pages to DocBook XML (GCI: http://www.google-melange.com/gci/task/view/google/gci2012/7960234) |
| 18:47.52 | starseeker | that will give you a head start when you eventually select your next task |
| 18:48.26 | Notify | 03GCI: Cezar has left the following comment at Convert remaining manual pages to Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7960234: Ready for review The work on this task is ready to be reviewed. |
| 18:48.41 | Notify | 03GCI: Cezar has left the following comment at Convert remaining manual pages to Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7960234: Commit r53944 Commit r53944 |
| 19:02.40 | Notify | 03GCI: Sean has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: no template John, there's no template. The article itself (ie, the text written) is more important than the layout. It should be informative and interesting, utilizing the questions and answers that Gala summarized. There were more... |
| 19:06.09 | brlcad | starseeker: yeah, that looks like exactly the case I'd be worried about |
| 19:08.33 | brlcad | starseeker: it shouldn't be getting to uninitialized memory there |
| 19:08.45 | brlcad | rather, unset |
| 19:09.37 | brlcad | isect_ray_cell_top() logic is probably wrong and/or isect_ray_dsp_bb() |
| 19:15.38 | starseeker | interesting - clang's static analyzer did catch the 1186 issue |
| 19:16.11 | Notify | 03GCI: Sean has left the following comment at Convert remaining manual pages to Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7960234: Task Closed Congratulations, this task has been completed successfully. |
| 19:16.16 | Notify | 03GCI: Will Bensky has left the following comment at Add missing documentation (for any ONE command) http://www.google-melange.com/gci/task/view/google/gci2012/7972228: Claim Removed The claim on this task has been removed, someone else can claim it now. |
| 19:16.21 | Notify | 03GCI: Will Bensky has left the following comment at Add missing documentation (for any ONE command) http://www.google-melange.com/gci/task/view/google/gci2012/7972228: Task Claimed I would like to work on this task. |
| 19:16.47 | bhlegm | brlcad why can't i remove gcibhlegm/ignore_me/? |
| 19:20.21 | Notify | 03GCI: Alexander Dimitrov has left the following comment at Create prototype CAD GUI layout diagram http://www.google-melange.com/gci/task/view/google/gci2012/7960223: Task Claimed I would like to work on this task. |
| 19:21.07 | Notify | 03BRL-CAD:starseeker * 53945 (brlcad/trunk/doc/docbook/system/man1/en/CMakeLists.txt brlcad/trunk/doc/docbook/system/man3/en/CMakeLists.txt brlcad/trunk/doc/docbook/system/man5/en/CMakeLists.txt): Remove src/other man pages from DocBook conversion - while the utahrle and step man page conversions are potentially useful, src/other contains separate projects so they'll need to be set up as separate builds in their |
| 19:21.10 | Notify | respective projects. Revision control will hold the conversions until we're ready for them |
| 19:21.28 | brlcad | caen23: http://www.google-melange.com/gci/task/view/google/gci2012/7959236 |
| 19:21.46 | Notify | 03GCI: Harmanpreet Singh has left the following comment at Add missing documentation (for any ONE command) http://www.google-melange.com/gci/task/view/google/gci2012/7972228: Task Assigned This task has been assigned to Will Bensky. You have 48 hours to complete this task, good luck! |
| 19:22.06 | Notify | 03GCI: Cezar has left the following comment at Fix and Validate Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7959236: Task Claimed I would like to work on this task. |
| 19:22.31 | caen23 | can i upload any patch? |
| 19:24.05 | *** join/#brlcad andrei (~andrei@188.25.158.113) |
| 19:24.15 | andrei | Sorry, I have had a power failure. |
| 19:24.31 | andrei | brlcad: I ran svn commit -F mat.c vmath.h |
| 19:25.29 | andrei | does this look correct : svn commit -F mat.c vmath.h -m " moving comments" |
| 19:31.26 | Notify | 03GCI: Sean has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: new task Gala, this was created to credit your work: http://www.google-melange.com/gci/task/view/google/gci2012/7966232 |
| 19:32.14 | *** join/#brlcad matt_s (~mshepit@ppp121-44-42-93.lns20.syd6.internode.on.net) |
| 19:32.19 | brlcad | andrei: I can only imagine that it's the -F that is the problem |
| 19:32.39 | andrei | there was no editor opening up however |
| 19:32.41 | *** join/#brlcad xavortm (xavortm@93.155.146.15) |
| 19:32.44 | brlcad | usual: svn commit -m "my message" file1 path/to/file2 file3 |
| 19:33.14 | andrei | ah, great, thanks. I will use that instead |
| 19:33.44 | brlcad | yeah, that's the problem: http://svnbook.red-bean.com/en/1.6/svn.ref.svn.c.commit.html |
| 19:33.52 | brlcad | -F means take message from that file |
| 19:34.06 | xavortm | some guide for what exactly am i supouse to do here: http://goo.gl/Qkfz7 ? Thx! |
| 19:35.21 | Notify | 03GCI: Sean has left the following comment at Create prototype CAD GUI layout diagram http://www.google-melange.com/gci/task/view/google/gci2012/7960223: Task Assigned This task has been assigned to Alexander Dimitrov. You have 72 hours to complete this task, good luck! |
| 19:35.59 | brlcad | starseeker: task to readd src/other pages as xml? |
| 19:36.26 | starseeker | brlcad: not sure. |
| 19:36.31 | Notify | 03GCI: Sean has left the following comment at Fix and Validate Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7959236: Task Assigned This task has been assigned to Cezar. You have 48 hours to complete this task, good luck! |
| 19:36.33 | starseeker | brlcad: here's what I'm thinking... |
| 19:37.07 | starseeker | the libutahrle and URToolkit code we're now the maintainer of, so that's a viable candidate for DocBook conversion |
| 19:37.37 | starseeker | to do that right though, I need to set up the DocBook macros for libutahrle as a valid subproject |
| 19:37.56 | Notify | 03GCI: Cezar has left the following comment at Fix and Validate Docbook XML http://www.google-melange.com/gci/task/view/google/gci2012/7959236: Ready for review The work on this task is ready to be reviewed. |
| 19:38.08 | starseeker | brlcad: IIRC, libutahrle and URToolkit were once the same project? |
| 19:39.11 | brlcad | starseeker: OR .. there's a task to set up the docbook macros |
| 19:39.23 | brlcad | unless it'd take more time to explain/mentor it than it'd take to do it |
| 19:39.36 | starseeker | brlcad: yeah, I'd better do that |
| 19:39.37 | xavortm | what exactly "design" means here: http://goo.gl/Qkfz7 ? |
| 19:39.52 | starseeker | isn't sure how the DocBook macros will work in a subbuild - may need to fix a few things |
| 19:40.00 | starseeker | worth doing, but not an easy task for a student |
| 19:40.32 | starseeker | let me finish up clearing out the old man pages from our build now that the xml ones are in, and I'll take a look at the utah build |
| 19:40.49 | brlcad | starseeker: can always make the very first task to try it out, have them just tell you whether it worked or not and give you the output |
| 19:41.12 | Notify | 03BRL-CAD:popescuandrei * 53946 brlcad/trunk/include/vmath.h: Moved mat_t description from mat.c to vmath.h |
| 19:41.16 | brlcad | caen23: so that implies we have no more manual pages anywhere and all in doc/docbook are strict valid? |
| 19:41.24 | brlcad | andrei: yay |
| 19:41.34 | andrei | Sorry for that mess :( |
| 19:41.39 | starseeker | brlcad: what I was getting at - can I set up a "utahrle" project that has both libutahrle and URToolkit, with appropriate build settings and goodies? Once that's set up, then plugging the utah man pages back in makes a lot of sense |
| 19:41.51 | caen23 | brlcad: as far as i'm concerned, yes |
| 19:41.54 | brlcad | xavortm: you're supposed to do what the description says, can you be more specific? |
| 19:42.08 | starseeker | has been thinking about that for a while, since setting up a utahrle project is one of the things we need to do for the Fedora guys |
| 19:42.24 | starseeker | As long as I'm here, I'd like to try setting that up now if that's OK |
| 19:42.25 | brlcad | wonders if he can get the GCI students to help roll out an entire binary release |
| 19:42.41 | brlcad | that'd be awesome |
| 19:42.48 | brlcad | starseeker: sure, whatever works :) |
| 19:42.59 | xavortm | i mean - design a psd file or write html/css |
| 19:43.02 | starseeker | brlcad: that'll be a few hours, but once it's ready it'll be a lot clearer for student tasks |
| 19:43.14 | brlcad | xavortm: sure, either of those options would be perfect |
| 19:43.22 | brlcad | you can prototype in anything you like |
| 19:43.31 | starseeker | could even have some of the Windows guys test the functionality of the URToolkit tools there - I don't know that it's ever been done |
| 19:43.32 | brlcad | pen and paper would work, just ... a lot harder |
| 19:43.54 | xavortm | and the functionality must be what is shown on the given .html file ? |
| 19:43.56 | starseeker | unit tests and/or regression tests for those tools would be nice, since we're maintaining them and their man mages and all |
| 19:43.58 | brlcad | xavortm: have you used any CAD software before? |
| 19:44.06 | starseeker | s/mages/pages |
| 19:44.12 | xavortm | nope, i am web designer :) |
| 19:44.16 | brlcad | xavortm: be sure to watch the 10min video in that link |
| 19:44.26 | starseeker | kinda orthogonal to BRL-CAD proper though... would that be a problem for GCI? |
| 19:44.37 | xavortm | ok, i will thanks! |
| 19:44.39 | brlcad | xavortm: OH, so you may also be interested in designing a similar prototype for our new website |
| 19:44.45 | brlcad | that task isn't posted yet, but will be soon |
| 19:44.51 | brlcad | keep an eye out after this one |
| 19:45.09 | xavortm | Okay! :) |
| 19:45.58 | brlcad | xavortm: you may want to check out http://pencil.evolus.vn/Default.html |
| 19:47.36 | brlcad | there are other similar services, but the kind of output expected will be a demonstration of what a user might want a CAD interface to look like if it were easy to implement as such |
| 19:48.03 | brlcad | starseeker: that is not orthogonal, anything that helps our project, we decide what we want |
| 19:48.23 | brlcad | I just made a task to fix up Notify, for example |
| 19:48.53 | brlcad | I also reached out to the tcl/tk devs to see if there was anything we could have done to help them (especially w.r.t. aquatk) |
| 19:49.02 | brlcad | but got no takers there so far :.( |
| 19:49.17 | Notify | 03BRL-CAD:starseeker * 53947 (brlcad/trunk/src/anim/CMakeLists.txt brlcad/trunk/src/anim/Makefile.am and 36 others): Whoosh - remove the man pages converted to xml. |
| 19:50.05 | Notify | 03GCI: Andrei Popescu has left the following comment at Compile BRL-CAD using Dev-C++ http://www.google-melange.com/gci/task/view/google/gci2012/7945220: Feedback The latest file that you uploaded contains errors in build log. You are welcomed to come and discuss them on IRC. Completing the task involves sucessfully building BRL-CAD. As you can see, your build fails at 0%. |
| 19:50.17 | brlcad | xavortm: also notice the examples subdir |
| 19:50.20 | Notify | 03GCI: Andrei Popescu has left the following comment at Compile BRL-CAD using Dev-C++ http://www.google-melange.com/gci/task/view/google/gci2012/7945220: Task Needs More Work One of the mentors has sent this task back for more work. Talk to the mentor(s) assigned to this task to satisfy the requirements needed to complete this task, submit your work again and mark the task as complete once... |
| 19:52.17 | brlcad | wonders if more students would claim the tasks to write a new manual page if they weren't all grouped together |
| 19:53.35 | andrei | if the deadline for an ActionNeeded task expires, does it return automatically to reopened? |
| 19:54.39 | brlcad | after a 24 grace, I believe so |
| 19:55.20 | Notify | 03GCI: Melange has left the following comment at Create geometry database with one of every primitive http://www.google-melange.com/gci/task/view/google/gci2012/7985226: No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. |
| 19:55.22 | brlcad | andrei: so the dev-c++ doesn't have to get a full compile since there might be some reason in our build system that it fails, but he does need to investigate in case it's something simple |
| 19:56.03 | brlcad | andrei: there should also be no hesitation to extend a task if it's clear that the student IS working on the task and it's just taking them a long time |
| 19:56.17 | andrei | from what I ve seen, it fails at first file (0%) |
| 19:56.27 | brlcad | yep, so something else is probably wrong |
| 19:56.30 | Notify | 03GCI: Will Bensky has left the following comment at Add missing documentation (for any ONE command) http://www.google-melange.com/gci/task/view/google/gci2012/7972228: path problems Hi..I am trying to work on this project with OSX. I downloaded the BRL .dmg file and installed it. It runs properly. I set up the path in my .profile to point to the brlcad bin directory. The undocumented... |
| 19:56.50 | brlcad | first thing to do will be to get them on our latest svn sources, that's 7.22.0 and is nfg |
| 19:56.54 | brlcad | clean checkout |
| 19:58.31 | andrei | <PROTECTED> |
| 19:58.54 | andrei | seems not |
| 20:00.03 | andrei | the number of students that are familiar with cad and csg is a lot greater than I expected |
| 20:02.11 | Notify | 03GCI: Melange has left the following comment at Model a "B" using BRL-CAD http://www.google-melange.com/gci/task/view/google/gci2012/7949231: Task Reopened Melange has detected that the final deadline has passed and it has reopened the task. |
| 20:04.51 | Notify | 03GCI: Melange has left the following comment at Compile BRL-CAD using GCC 4.8 http://www.google-melange.com/gci/task/view/google/gci2012/7982223: Initial Deadline passed Melange has detected that the initial deadline has passed and it has set the task status to ActionNeeded. The student has 24 hours to submit the work before the task is reopened and sent back to the pool for other students... |
| 20:05.21 | Notify | 03GCI: Gala has left the following comment at Interview BRL-CAD's maintainer, Jordi Sayol http://www.google-melange.com/gci/task/view/google/gci2012/7966232: Task Claimed I would like to work on this task. |
| 20:06.06 | Notify | 03GCI: Andrei Popescu has left the following comment at Interview BRL-CAD's maintainer, Jordi Sayol http://www.google-melange.com/gci/task/view/google/gci2012/7966232: Task Assigned This task has been assigned to Gala. You have 24 hours to complete this task, good luck! |
| 20:06.25 | Notify | 03GCI: Gala has left the following comment at Interview BRL-CAD's maintainer, Jordi Sayol http://www.google-melange.com/gci/task/view/google/gci2012/7966232: Task Credit Thank you! :) |
| 20:10.49 | Notify | 03GCI: Sean has left the following comment at Interview BRL-CAD's maintainer, Jordi Sayol http://www.google-melange.com/gci/task/view/google/gci2012/7966232: upload interview e-mail Gala you can upload your interview questions and answer, and mark the task completed. Thanks again for your efforts! |
| 20:12.03 | starseeker | brlcad: OK, have a sourceforge project up: http://sourceforge.net/projects/utahrle/ |
| 20:12.20 | starseeker | oh - I went with git, will that cause problems? |
| 20:12.44 | starseeker | had better check before he starts doing rework... |
| 20:13.24 | starseeker | caen23: does everything look OK man page wise? |
| 20:13.37 | starseeker | (remember, leaving src/other man pages alone for now) |
| 20:13.46 | starseeker | think I got everything |
| 20:15.27 | *** join/#brlcad matt_s (~mshepit@ppp121-44-42-93.lns20.syd6.internode.on.net) |
| 20:15.28 | caen23 | starseeker: hmm… it looks ok to me. i haven't tried converting to pdf to see what it looks like, but validation wise, it's fine |
| 20:16.26 | Notify | 03GCI: John has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: Alpha version Sean, I have already been working on an alpha version of the article (260 words). I've also sent a message to Jordi with a few more questions. Is there any way I can show you what I've already done, or you prefer to... |
| 20:16.33 | starseeker | I'm seeing six man pages left in the tree: find . -type f -name \*.1 |grep -v other |
| 20:16.50 | starseeker | the pixtx.1 page is fine, it's commented out in both build systems |
| 20:17.11 | starseeker | brlcad: as an aside - is there something we need to do to pictx to make it viable/useful? |
| 20:17.57 | starseeker | enigma probably counts as external, but I'd say the other four could be converted |
| 20:19.08 | caen23 | starseeker: hmm… could you give me their names? i haven't deleted the ones i converted, and the trunk still contains them |
| 20:19.56 | starseeker | bench/benchmark.1, bench/pixcmp.1, misc/brlcad-config.1 |
| 20:20.05 | Notify | 03GCI: Sean has left the following comment at Write BRL-CAD News article on .deb/.rpm builds http://www.google-melange.com/gci/task/view/google/gci2012/7945213: i'll wait I'm okay waiting until you're done. ;) |
| 20:20.11 | starseeker | have to ask brlcad about src/external/Unigraphics/ug-g.1 |
| 20:21.26 | Notify | 03BRL-CAD:starseeker * 53948 (brlcad/trunk/src/librt/CMakeLists.txt brlcad/trunk/src/librt/Makefile.am): Caught a leftover .3 file that has an xml file - remove. |
| 20:21.59 | caen23 | oh, sorry. i've only checked inside src :-" i'll do the others now and post the patches to my current task |
| 20:22.19 | Notify | 03GCI: Sean has left the following comment at Add missing documentation (for any ONE command) http://www.google-melange.com/gci/task/view/google/gci2012/7972228: instead of the DMG Will, Instead of using the DMG, I suggest compiling BRL-CAD from source and following the usual instructions. As long as you're not on 10.8 and you have the dev tools (XCode) and CMake installed, it should go... |
| 20:22.24 | starseeker | caen23: there are also 4 in doc: doc/plot3.5 doc/bw.5 doc/pix.5 doc/cmap.5 |
| 20:23.33 | xavortm | hey, brlcad, i made something just now, please tell me if i am in the right direction: http://store.picbg.net/pubpic/7E/A7/d0a7721e71197ea7.jpg Thanks! |
| 20:23.52 | starseeker | caen23: no problem. just making sure we qualify for brlcad's "no more manual pages anywhere" criteria (which presumably excludes src/other - that's a different story) |
| 20:24.23 | starseeker | Trying to convince the Tcl/Tk devs to switch to DocBook man pages is not something starseeker has the stomach for |
| 20:27.01 | *** join/#brlcad matt_s (~mshepit@ppp121-44-42-93.lns20.syd6.internode.on.net) |
| 20:28.01 | Notify | 03BRL-CAD:starseeker * 53949 brlcad/trunk/src/librt/CMakeLists.txt: Oh, right - don't ignore librt.3 anymore either. |
| 20:31.05 | starseeker | brlcad: could you add me as an admin to the tkhtml project on sourceforge? |
| 20:31.30 | Notify | 03GCI: Gala has left the following comment at Interview BRL-CAD's maintainer, Jordi Sayol http://www.google-melange.com/gci/task/view/google/gci2012/7966232: Ready for review The work on this task is ready to be reviewed. |
| 20:32.10 | Notify | 03GCI: Sean has left the following comment at Upgrade Drupal website http://www.google-melange.com/gci/task/view/google/gci2012/7958216: installed The hash extension is now installed. |
| 20:32.20 | Notify | 03GCI: Sean has left the following comment at Upgrade Drupal website http://www.google-melange.com/gci/task/view/google/gci2012/7958216: Deadline extended The deadline of the task has been extended with 1 days and 0 hours. |
| 20:33.55 | Notify | 03GCI: Alex has left the following comment at Write a tutorial on compiling BRL-CAD with XCode on Mac OS X http://www.google-melange.com/gci/task/view/google/gci2012/8022212: Re: looks really good Ah, I see. Originally, I wan't exactly sure how far I was supposed to go. I might have to look at that other task so that I can finish up the rest of it. Thanks for giving me the credit anyway. ~... |
| 20:37.55 | Notify | 03GCI: Sean has left the following comment at Add a primitive surface area function ... for triangle meshes (BOT) http://www.google-melange.com/gci/task/view/google/gci2012/7968224: answers 1. If it's really long, you can add a bot_surf_area.c file, but at the end of bot.c is fine too. Follow the naming convention used by the other surface area functions for other objects (see... |
| 20:39.16 | Notify | 03GCI: Sean has left the following comment at Interview BRL-CAD's maintainer, Jordi Sayol http://www.google-melange.com/gci/task/view/google/gci2012/7966232: Task Closed Congratulations, this task has been completed successfully. |
| 20:39.22 | Notify | 03BRL-CAD:starseeker * 53950 brlcad/trunk/doc/docbook/system/man1/en/fbed.xml: tweak for strict XML with fbed man page. |
| 20:41.21 | Notify | 03BRL-CAD:starseeker * 53951 brlcad/trunk/doc/docbook/system/man1/en/lgt.xml: Tweak lgt man page to pass strict. |
| 20:43.07 | xavortm | brlcad? Online? |
| 20:43.45 | andrei | notify !ask |
| 20:43.50 | andrei | bah |
| 20:43.58 | xavortm | ? :) |
| 20:44.05 | andrei | Xavortm: ask your question, brlcad will answer when he 's here :) |
| 20:44.22 | andrei | I wanted the bot to output a message regarding asking questions, but I failed for some reason |
| 20:44.35 | Notify | 03BRL-CAD:starseeker * 53952 brlcad/trunk/doc/docbook/system/man1/en/ug-g.xml: ug-g strict tweak. |
| 20:44.38 | starseeker | !notify ask |
| 20:44.39 | Notify | Questions in the channel should be specific, informative, complete, concise, and on-topic. Don't ask if you can ask a question first. Don't ask if a person is there; just ask what you intended to ask them. Better questions more frequently yield better answers. We are all here voluntarily or against our will. |
| 20:44.52 | andrei | that one. |
| 20:46.05 | Notify | 03BRL-CAD:starseeker * 53953 (brlcad/trunk/doc/docbook/system/man1/en/CMakeLists.txt brlcad/trunk/src/irprep/CMakeLists.txt brlcad/trunk/src/irprep/Makefile.am): pictx was converted - since it's supposed to be commented out, do so at the xml level. |
| 20:46.57 | xavortm | I understand. So, my question: Do i need to redesign it? What i did is making better looking design (inspired by the sample files). Here is what i did: http://store.picbg.net/pubpic/7E/A7/d0a7721e71197ea7.jpg I can add more functionality and better UI. I wana know if i have to make design for all the slides displayed in the .html file or just a few to display the functionality. Is this site or |
| 20:46.57 | xavortm | application? Operation system? Or i dont need to know them ^^ ? Thanks! |
| 20:48.09 | Notify | 03BRL-CAD:starseeker * 53954 brlcad/trunk/doc/docbook/system/man3/en/libcursor.xml: libcursor man page strict tweak |
| 20:51.01 | starseeker | caen23: ok, except for the bench and misc pages (plus the unigraphics one) mentioned earlier, it looks good here now |
| 20:51.03 | Notify | 03GCI: Petar Stanev has left the following comment at Create an artistic screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8025213: Task Claimed I would like to work on this task. |
| 20:51.24 | starseeker | caen23: passed a strict build after a few tweaks, and I think I've got all the old man pages removed |
| 20:52.50 | caen23 | starseeker: ok, awesome. i'll get the rest fixed, but i'm surprised it didn't pass validation at first. i mean, i knew something was wrong because i had to use 'sudo make' to get around a 'permission denied' issue. is this what you've tweaked? and if so, what did you do? :D |
| 20:53.14 | starseeker | caen23: um. No, that's not what I saw |
| 20:53.19 | Notify | 03BRL-CAD:brlcad * 53955 brlcad/trunk/AUTHORS: credit Alex Perez for his GCI work writing a tutorial on generating an XCode project for BRL-CAD. |
| 20:53.39 | starseeker | I just saw a few validity things, mostly having to do with synopsis brackets |
| 20:53.42 | Notify | 03GCI: Andrei Popescu has left the following comment at Create an artistic screenshot http://www.google-melange.com/gci/task/view/google/gci2012/8025213: Task Assigned This task has been assigned to Petar Stanev. You have 48 hours to complete this task, good luck! |
| 20:53.53 | starseeker | caen23: you may want to try a clean checkout |
| 20:54.11 | starseeker | caen23: since you're down to the last few, I'll turn XML strict back on by default |
| 20:54.33 | andrei | I'm working on eliminating the globals DBIP,srv_argc and srv_argv from gtools/gt_transfer.c |
| 20:54.42 | caen23 | oh, then something was off on my machine. yep, i plan on doing a clean co and i'll also try building with llvm-trunk |
| 20:55.21 | andrei | DBIP would probably be easily contained by my_data structure(similar to the client), however I'm not sure where I should fit srv_argc and srv_argv |
| 20:55.35 | brlcad | caen23: you should really never need to run sudo |
| 20:55.41 | brlcad | at least not to compile/test brl-cad |
| 20:55.43 | Notify | 03BRL-CAD:starseeker * 53956 brlcad/trunk/CMakeLists.txt: DocBook conversion just about complete, thanks to awesome GCI work. Turn strict XML validation back on by default. |
| 20:56.11 | brlcad | applications will run from the build directory 'bin' directory |
| 20:56.21 | brlcad | so you don't even need to run make install |
| 20:57.28 | caen23 | brlcad: i am aware of this, but a full clean co & build took way longer, so i chose to go with that for this purpose only |
| 20:57.49 | brlcad | andrei: in a traditional program, you shouldn't need to pass ac, av around except maybe to one handler function |
| 20:57.49 | starseeker | brlcad: what did you want to do about the src/external/Unigraphics/ug-g.1 man page? |
| 20:58.36 | brlcad | that's our header |
| 20:59.05 | brlcad | should have gotten converted with the "all remaining" task, but the instructions might have ignored external |
| 20:59.12 | starseeker | think they did |
| 20:59.29 | starseeker | caen23: ok, go ahead and pick off src/external/Unigraphics/ug-g.1 too |
| 20:59.31 | brlcad | i know the other tasks did, but i thought the all remaining was relaxed |
| 21:00.08 | brlcad | xavortm: to you're on the right track, but some more thought needs to go into the example/content |
| 21:00.18 | xavortm | Hey, can you give me answer to my question (if possible ^^) i am new into all of this |
| 21:00.59 | brlcad | xavortm: so the GUI video was fully general, but our interface wouldn't be -- we're not designing publications, pamplets, etc |
| 21:01.13 | *** join/#brlcad Barakados_ (~BashawS@c-67-188-214-88.hsd1.ca.comcast.net) |
| 21:02.13 | xavortm | Well, i wonder what i should do when i dont know what is going to be displayed. I dont understand you well, sorry :(( |
| 21:02.17 | brlcad | xavortm: this is a prototype for an application operating environment, so some hybrid between appliation and operating system, but specialized to CAD and geometry |
| 21:03.32 | brlcad | xavortm: so sure, you don't know the content necessarily but you're going to need to become a little bit familiar with what a modeling application needs to offer |
| 21:04.37 | xavortm | I see, so i think for the functionality? I decide what the program should do (totaly stick with CAD stuff) |
| 21:04.48 | xavortm | am i right? |
| 21:04.55 | brlcad | more importantly for the prototype you've started, how does the list of tasks expand, can I search them, where's the search box, is there, etc |
| 21:05.05 | brlcad | right, that's a great start |
| 21:05.54 | xavortm | Well, as i saw in the screenshots, it is not expanding,but it is starting page. I just merge the home page and the pages when you click. |
| 21:06.12 | brlcad | starseeker: does pictx exist? |
| 21:06.21 | xavortm | (one last thing) should i work on what i did and add more things or start new one? :) |
| 21:06.34 | brlcad | and if it does, then why is the header commented out? |
| 21:08.28 | starseeker | pictx.c does |
| 21:08.36 | starseeker | but it's not built |
| 21:08.51 | brlcad | ah, so gci task |
| 21:09.04 | brlcad | what others are disabled that should be enabled? |
| 21:09.29 | starseeker | brlcad: not sure offhand why that's disabled, but it's not just me - even the Makefile.am had it turned off |
| 21:11.26 | brlcad | we'll find out |
| 21:13.11 | starseeker | brlcad: sorry if you've already checked scrollback - did you see my git and tkhtml questions? |
| 21:16.06 | *** join/#brlcad caen23_ (~caen23@92.81.204.43) |
| 21:18.43 | brlcad | http://www.google-melange.com/gci/task/view/google/gci2012/7958220 |
| 21:19.54 | starseeker | brlcad: looks good |
| 21:19.58 | brlcad | starseeker: yeah, no problem with git -- I'd not created it because I was wanting to also change the name |
| 21:20.10 | starseeker | does utahrle work? |
| 21:20.31 | brlcad | works great |
| 21:20.34 | starseeker | sweet |
| 21:20.46 | starseeker | I'll start reworking the build tonight then |
| 21:21.02 | starseeker | if you can give me admin on the sf tkhtml project, I'll try and get that buzzing too |
| 21:21.16 | starseeker | two fairly easy boxes to check on the Fedora requirements list |
| 21:21.27 | brlcad | thinks starseeker needs to work on delegation while we have minions! |
| 21:21.47 | starseeker | oh, don't worry - once I've got the basic setup I want there'll be lots to do! |
| 21:22.49 | brlcad | we should populate the repo with our entire history |
| 21:22.56 | brlcad | so it's preserved |
| 21:23.07 | andrei | I edited the server_ciao callback like this: server_ciao(struct pkg_conn *UNUSED(connection), char *buf, struct db_i *dbip). I'm getting some errors on pkg_switch callbacks tho. " /home/andrei/brlcad_Commits/src/gtools/g_transfer.c:248:2: error: excess elements in struct initializer" |
| 21:23.49 | andrei | should I add an extra element? server_helo doesn't seem to need any additional param tho |
| 21:23.57 | starseeker | the only 2 things that *might* be tkhtml GCI tasks that I can think of are teaching FindTCL to use tclsh and tcl::pkgconfig (probably too hard unless they have some CMake knowledge) and seeing where else in the code that fix we had to make for Win64 might apply |
| 21:24.18 | starseeker | s/make/apply - someone on google groups actually figured it out |
| 21:24.27 | starseeker | brlcad: urk. |
| 21:24.44 | starseeker | I already did an initial upload |
| 21:24.52 | starseeker | let me see if I can get it to start over... |
| 21:25.04 | brlcad | andrei: sounds like you're misunderstanding the callback struct |
| 21:25.09 | brlcad | for pkg_switch |
| 21:25.26 | starseeker | brlcad: do you know if there's anyone at Utah we could contact that might have the authority to change the license to one of the standard OSI approved licenses? |
| 21:25.33 | starseeker | one-offs suck |
| 21:25.48 | andrei | brlcad: I assume that pkg_switch has some sort of function pointer with fixed parameters |
| 21:26.21 | andrei | actually, I ll have a look. |
| 21:28.01 | andrei | this is what I think I should change : typedef void (*pkg_callback)PKG_ARGS((struct pkg_conn*, char*)); |
| 21:29.01 | xavortm | How many window designs i should make? |
| 21:29.47 | brlcad | starseeker: there certainly is and I probably know them and this is not something they'll want to think about or try to press with their legal folks |
| 21:30.01 | starseeker | mutter |
| 21:30.11 | starseeker | OK, we'll live with it then |
| 21:30.14 | brlcad | go ahead and try, but I don't think you'll get traction |
| 21:30.24 | brlcad | not from any academic in today's environment |
| 21:30.37 | starseeker | nods - pm me the name/contact info? |
| 21:30.49 | starseeker | costs nothing to at least ask |
| 21:31.13 | Notify | 03GCI: BrendenD15 has left the following comment at Compile BRL-CAD on Windows using Cygwin http://www.google-melange.com/gci/task/view/google/gci2012/7972239: I fixed it That's alright, I got it fixed now. Now I'm working on configuring the source code so that my machine can build it. However, it may take my machine close to the full hour to compile the code. So it will be past the deadline... |
| 21:31.18 | brlcad | suggest just contacting their cs or legal department after everything is set up, or relicensing it yourself with a compatible license |
| 21:31.34 | starseeker | brlcad: ah, k |
| 21:32.13 | brlcad | the latter is a kosher option, just have to find terms that fit |
| 21:32.23 | starseeker | was just concerned about the bit where we either have to include the source or inform them the source is available for no extra charge |
| 21:32.33 | brlcad | i.e., were complying with the new license implicitly complies with what they wrote |
| 21:32.57 | brlcad | most of the gnu license have that same requirement spelled out |
| 21:33.22 | starseeker | nods - suppose LGPL2 may be viable then |
| 21:33.24 | brlcad | "making available" is not defined, so there's a HUGE amount of room there |
| 21:33.41 | starseeker | prefers the simplicity of MIT/BSD these days... must be getting old |
| 21:33.45 | brlcad | I'd go down the list and see if anything less restrictive would even fit |
| 21:33.49 | brlcad | like mit |
| 21:34.12 | brlcad | but warrants walking the list if you really want to find something |
| 21:34.32 | starseeker | brlcad: was just thinking ahead to the Fedora packaging discussions |
| 21:34.33 | brlcad | lgpl might fit, but would have to read the legalese for each statement and consider them individually |
| 21:34.38 | Notify | 03GCI: Andrei Popescu has left the following comment at Compile BRL-CAD on Windows using Cygwin http://www.google-melange.com/gci/task/view/google/gci2012/7972239: extension Could you please upload your work so far? If you made any progress, I will extend the deadline for the task so don't worry about it! |
| 21:35.01 | brlcad | starseeker: half of urtoolkit is probably already in fedora |
| 21:35.53 | brlcad | that's such an old fundamentla library |
| 21:36.05 | starseeker | ok - maybe it's not a problem then |
| 21:36.09 | andrei | I eliminated DBIP by adding struct db_i * as param to the callbacks, does that look right? ShouldI look for an alternative way? |
| 21:36.18 | brlcad | xavortm: depends how long each takes you |
| 21:36.34 | brlcad | I'd rather have one be complete than 10 half-assed ;) |
| 21:36.47 | brlcad | xavortm: be sure to include BRL-CAD branding somewhere in the interface |
| 21:36.51 | starseeker | http://bzflag.bz/~starseeker/urt-copyright.txt |
| 21:36.58 | xavortm | i have some experience, the one i show you took me 10 minutes |
| 21:37.11 | brlcad | either BRL-CAD instead of Task Center or our logo somewhere or BRL-CAD in a status line somewhere or one of the other corners, etc... |
| 21:37.35 | starseeker | brlcad: hmm - which version of urt did we start with? I finally found a tarball of urt3.1b somewhere |
| 21:37.38 | brlcad | starseeker: yeah, I've read that before |
| 21:37.50 | starseeker | ah, k - sorry |
| 21:38.01 | brlcad | that's why I'd have to sit down with that and lgpl (or whatever) myself to verify each clause is covered |
| 21:38.30 | brlcad | it's just a simple mapping problem |
| 21:38.42 | starseeker | I probably should leave well enough alone until the Fedora guys actually object |
| 21:39.00 | xavortm | but ... last thing i want to ask - I must design cad user interface or redesign what you display and add more functionality? I loost this part :)) |
| 21:39.06 | starseeker | how much did we actually change in urt, aside from breaking it into two directories? |
| 21:40.39 | starseeker | ok, nevermind... |
| 21:40.44 | starseeker | yipe |
| 21:42.57 | starseeker | brlcad: if I need to, I'll just re-create the history in single directory form by walking through the changes |
| 21:46.31 | brlcad | starseeker: that works except that the dates end up being wrong |
| 21:46.38 | brlcad | should be able to migrate and cull history |
| 21:47.15 | brlcad | those libs have history that even predates src/other that would be good to preserve |
| 21:47.22 | Notify | 03GCI: BrendenD15 has left the following comment at Compile BRL-CAD on Windows using Cygwin http://www.google-melange.com/gci/task/view/google/gci2012/7972239: Sounds Good I'll send in the work so far. |
| 21:47.32 | brlcad | the data historian in me begs for preserving everything |
| 21:47.47 | starseeker | brlcad: it is preserved in BRL-CAD's repo though |
| 21:48.09 | starseeker | oops |
| 21:48.16 | starseeker | rebuilds git with svn support this time... |
| 21:48.17 | brlcad | that's not the same :) |
| 21:48.24 | brlcad | that's like saying our history is preserved in CVS |
| 21:48.43 | brlcad | pulling it forward to SVN has been a life-saver on many an occasion |
| 21:48.46 | brlcad | and just plain cool |
| 21:49.17 | brlcad | xavortm: so you have a lot of artistic license to do either |
| 21:49.38 | brlcad | xavortm: the real goal is that we end up with something we can use or at least be inspired by |
| 21:49.41 | starseeker | brlcad: doing so won't be easy - that multiple path thing means we have two separate histories |
| 21:50.03 | starseeker | mutter - rebuilding git *and* subversion |
| 21:50.23 | brlcad | xavortm: so that means thinking about what our users might want to see, thinking about what design would be most effective |
| 21:50.27 | starseeker | could just put the original dates in the commit messages... |
| 21:51.02 | Notify | 03GCI: BrendenD15 has left the following comment at Compile BRL-CAD on Windows using Cygwin http://www.google-melange.com/gci/task/view/google/gci2012/7972239: Side Note I should note that I tried configuring the code using the CMake GUI and Visual Studio. The program did configure the files correctly, however, I did not keep these because I was only testing that Visual Studio was working... |
| 21:51.39 | brlcad | xavortm: if we had a single BRL-CAD application that I started up, I could see there being something like the "task center" you show with common activities encompassed .. but within a CAD context, I'd definitely expect it to offer different options and be prepared to scale |
| 21:52.10 | brlcad | starseeker: I think you are lacking faith in the ability of git and svn to give you tools that let you do that |
| 21:52.33 | starseeker | considers that statement and finds it accurate |
| 21:52.35 | brlcad | both have tools to dump a repo and perform changes on the history through time |
| 21:52.37 | starseeker | we'll know soon |
| 21:53.25 | starseeker | brlcad: for even more fun, I managed to scare up old tarballs of urt 3.1a and 3.1b |
| 21:54.11 | brlcad | starseeker: so what other tools are disabled that we can whip up tasks for? |
| 21:54.19 | brlcad | easy to do while I still have this window open |
| 21:54.31 | starseeker | looks |
| 21:56.21 | starseeker | they could *maybe* try and get those mged regression tests I did a long while back working |
| 21:56.43 | starseeker | in regress/mged |
| 21:56.50 | xavortm | Can i write a doc file explaining my ideas of how it should work? |
| 21:58.00 | starseeker | brlcad: you might have them look at that old namegen.c code in librt, if you can document the rules you want it to follow for name generation |
| 21:58.02 | brlcad | xavortm: sure |
| 21:58.12 | brlcad | xavortm: or that can be a separate task |
| 21:58.24 | brlcad | expects a lot of thought and effort to go into design |
| 21:58.35 | brlcad | discussing it is good |
| 21:58.55 | xavortm | It would be great :) I need to make 3 tasks ^^ |
| 21:59.03 | brlcad | starseeker: heh, maybe but lets knock out the lower hanging fruit first :) |
| 21:59.22 | brlcad | xavortm: we can create more tasks for different prototypes |
| 21:59.45 | brlcad | like one for that task center, another for geometry browsing, another for editing, another for credits screen, another for ... |
| 22:00.10 | starseeker | it's actually a bit hard to tell what's turned off - the pix one popped out because it's man page was also commented out and it was left standing |
| 22:00.21 | brlcad | starseeker: so none other disabled into the bowels of a CMAKEFILES list |
| 22:00.23 | xavortm | I see, tommorow i will work on that :) Huge thanks for the help! |
| 22:00.37 | brlcad | xavortm: thanks for your efforts |
| 22:00.43 | brlcad | hops off to din din |
| 22:00.57 | starseeker | is looking - the trick is sometimes you have to CMAKEFILES a file even when it is used cause it's only used on some platforms |
| 22:01.26 | brlcad | regular expression ftw |
| 22:01.35 | brlcad | just list them all and look for .c files ;) |
| 22:01.47 | starseeker | <snort> that could be a GCI task - they'd probaby do it faster/better than I |
| 22:01.50 | brlcad | shouldn't have source disabled |
| 22:01.57 | starseeker | remrt might be one... |
| 22:02.08 | brlcad | remrt builds |
| 22:02.11 | starseeker | not on Windows |
| 22:02.16 | starseeker | rttherm is another one |
| 22:02.17 | brlcad | that's different |
| 22:02.27 | brlcad | I mean tools like pictx that are just outright disabled |
| 22:02.31 | brlcad | i know I've seen a couple |
| 22:02.31 | starseeker | ah |
| 22:02.51 | brlcad | things that weren't migrated or were even disabled in autotools build |
| 22:03.17 | starseeker | brlcad: what about the remaining (relatively simple) lex/yacc -> perplex/lemon conversions? |
| 22:03.53 | starseeker | pixtest.c in src/rtthem seems to be off |
| 22:05.37 | starseeker | pictx.c and pixtext.c are the only two I"m spotting at the moment |
| 22:07.35 | brlcad | starseeker: those are several days each |
| 22:07.49 | brlcad | parser rewrites |
| 22:08.02 | brlcad | too hard too, need to know a lot |
| 22:08.43 | brlcad | they could write a perplex example and a lemon example |
| 22:12.16 | starseeker | nods - that would be handy |
| 22:12.50 | starseeker | starts git svn on src/other/libutahrle and heads for dinner |
| 22:14.41 | starseeker | brlcad: about source being disabled - we have a number of cases where we have source code for one OS in one file and another OS in another file |
| 22:14.47 | starseeker | did you want cases like that too? |
| 22:22.13 | Notify | 03GCI: BrendenD15 has left the following comment at Compile BRL-CAD on Windows using Cygwin http://www.google-melange.com/gci/task/view/google/gci2012/7972239: Ready for review The work on this task is ready to be reviewed. |
| 22:24.38 | Notify | 03GCI: BrendenD15 has left the following comment at Compile BRL-CAD on Windows using Cygwin http://www.google-melange.com/gci/task/view/google/gci2012/7972239: Sorry for the Wait I thought I'd sent file, but I apparently didn't realize that I had to click another button after I uploaded the work. Sorry about that. |
| 22:35.53 | *** join/#brlcad GrantMercer015 (~GrantMerc@p1120-ipbfp301fukuokachu.fukuoka.ocn.ne.jp) |
| 22:36.06 | GrantMercer015 | Hello everyone, is brlcad awake? |
| 22:37.03 | starseeker | what do you need? is it something only he can do? |
| 22:38.06 | GrantMercer015 | just looking onto what a command would do , let me grab it |
| 22:38.11 | GrantMercer015 | i think you would be able to help me |
| 22:39.31 | GrantMercer015 | cat /tmp/ord_id >> |
| 22:39.31 | GrantMercer015 | followed by a call to bu_vls_strcat(&cmd, argv[1]); |
| 22:39.47 | GrantMercer015 | my guess that it coppies the file onto the end of argv[1] ? |
| 22:40.13 | Notify | 03GCI: Melange has left the following comment at Compile BRL-CAD on Windows using Cygwin http://www.google-melange.com/gci/task/view/google/gci2012/7972239: No more Work can be submitted Melange has detected that the deadline has passed and no more work can be submitted. The submitted work should be reviewed. |
| 22:43.09 | GrantMercer015 | starseeker: i posted the question up a little if you hadnt noticed, thanks if you could take a look |
| 22:43.39 | starseeker | urm |
| 22:43.48 | starseeker | cat is being run inside the C code?? |
| 22:44.10 | GrantMercer015 | on the console |
| 22:44.22 | GrantMercer015 | my job is to remove those console commands with c code |
| 22:44.36 | starseeker | ok - so where is the >> directing to? |
| 22:44.48 | GrantMercer015 | argv[1], so a file |
| 22:45.07 | starseeker | any reason you can't just directly read /tmp/ord_id into a string? |
| 22:45.17 | starseeker | or use the libbu file mapping abilities? |
| 22:45.22 | GrantMercer015 | it copies the data from the file onto the end of argv[1], only problem is argv[1] is const O.o |
| 22:45.25 | GrantMercer015 | i have all the data |
| 22:45.34 | GrantMercer015 | i just need to finish up by writing to the end of argv[1] |
| 22:45.51 | GrantMercer015 | brlcad mentioned that i can modify a const, but he never let me know how |
| 22:57.03 | GrantMercer015 | is it legal to do the following: fprintf(argv[1],DataArray[0])? |
| 23:00.18 | *** join/#brlcad lachlanp (~lachlan@203.122.226.79) |
| 23:06.26 | Barakados_ | hello? |
| 23:06.32 | GrantMercer015 | hello! |
| 23:06.41 | Barakados_ | How come i get errors when i compile the source in files i didn't edit? |
| 23:07.07 | Barakados_ | example: error: ‘CFBundleRef’ undeclared (first use in this function) |
| 23:07.34 | GrantMercer015 | try using BRLCAD cross reference to look up CFBundleRef |
| 23:07.41 | GrantMercer015 | that could have a link to what you modified |
| 23:09.16 | lachlanp | hi |
| 23:10.25 | Barakados_ | should i submit it? |
| 23:10.45 | GrantMercer015 | if there is an error with the source, no |
| 23:11.04 | Barakados_ | i'm confused... |
| 23:11.27 | GrantMercer015 | Google BRL CAD cross reference |
| 23:11.33 | GrantMercer015 | browse the source code |
| 23:11.38 | GrantMercer015 | hit "identifier search" |
| 23:11.46 | GrantMercer015 | type in CFBUndleRef |
| 23:12.02 | GrantMercer015 | check where it is defined, and see if it have any linkage to the source you modified |
| 23:14.42 | Barakados_ | can i have a link to the page you search on? |
| 23:14.56 | Barakados_ | oop nevermind |
| 23:15.25 | Barakados_ | it says it is not used |
| 23:17.14 | starseeker | brlcad: so far, the tools are living up to my expectations |
| 23:17.19 | GrantMercer015 | leave a reply onto your task and see if they'll get to you, thats all i can really say |
| 23:18.48 | Notify | 03GCI: Sean Bashaw has left the following comment at Convert 24 other man pages to valid Docbook http://www.google-melange.com/gci/task/view/google/gci2012/8005210: Errors On Compilation. My code gets errors in classes I didn't edit. I get errors like: 53:48: error: CoreFoundation/CoreFoundation.h: No such file or directory If you can help me msg me on the irc i am Barakados |
| 23:19.30 | *** join/#brlcad Barakados (~BashawS@c-67-188-214-88.hsd1.ca.comcast.net) |
| 23:19.48 | Barakados_ | hello! |
| 23:20.00 | *** part/#brlcad Barakados_ (~BashawS@c-67-188-214-88.hsd1.ca.comcast.net) |
| 23:20.09 | *** part/#brlcad Barakados (~BashawS@c-67-188-214-88.hsd1.ca.comcast.net) |
| 23:20.25 | *** join/#brlcad Barakados (~BashawS@c-67-188-214-88.hsd1.ca.comcast.net) |
| 23:20.31 | starseeker | brlcad: http://pastebin.mozilla.org/1972228 |
| 23:21.53 | Barakados | brlcad: CoreFoundation is not found |
| 23:29.18 | Notify | 03GCI: BrendenD15 has left the following comment at Compile BRL-CAD on Windows using Cygwin http://www.google-melange.com/gci/task/view/google/gci2012/7972239: Configured using different method I decided to try configuring the code using the CMake GUI since I was getting nowhere trying to use CMake inside of Cygwin. I was able to set Visual Studio as the compiler and my computer completed... |
| 23:31.02 | lachlanp | hi brlcad: can i use a temporary file (bu_temp_file) in my unit test? |
| 23:32.07 | lachlanp | or can a mapped_file be used as a regular file? |
| 23:34.30 | starseeker | notes KDE example uses a local copy of the SVN repo |
| 23:34.35 | starseeker | ho boy |
| 23:34.43 | starseeker | *now* it's dinnertime |
