| 00:00.20 | *** join/#brlcad co_ (80876466@gateway/web/freenode/ip.128.135.100.102) |
| 00:00.36 | andrei | oh , that's understandable |
| 00:00.58 | andrei | anyhow I think I have gained a slightly better understanding of the code |
| 00:01.12 | andrei | I ll just get to sleep and reread tomorrow when I m fresh :) |
| 00:01.47 | andrei | Goodnight! |
| 01:22.56 | *** join/#brlcad Al_Da_Best (~Al_Da_Bes@027e71f6.bb.sky.com) |
| 01:34.48 | CIA-128 | BRL-CAD: 03starseeker * r49758 10/brlcad/trunk/ (CMakeLists.txt misc/CMake/multiconfig_path_read.cmake.in): Get the actual install process with multiconfig tools to use dev and rel install locations |
| 01:58.39 | CIA-128 | BRL-CAD: 03starseeker * r49759 10/brlcad/trunk/misc/CMake/multiconfig_path_read.cmake.in: More than just the install prefix to handle here... |
| 02:15.48 | starseeker | finishes Xcode Debug build test... fingers crossed... |
| 02:35.44 | *** join/#brlcad witness123 (~witness@14.139.228.210) |
| 02:36.09 | starseeker | and Release succeeds too |
| 02:36.29 | starseeker | sighs in relief and calls it an evening |
| 03:26.59 | *** join/#brlcad witness123 (~witness@14.139.228.210) |
| 04:08.54 | *** join/#brlcad diakatana (~diakatana@c-68-37-59-103.hsd1.nj.comcast.net) |
| 04:52.20 | *** join/#brlcad Neil___ (~chatzilla@117.229.86.232) |
| 05:38.00 | *** join/#brlcad listener (dce36165@gateway/web/freenode/ip.220.227.97.101) |
| 07:01.52 | *** join/#brlcad Neil___ (~chatzilla@117.229.86.232) |
| 07:13.42 | *** join/#brlcad witness123 (~witness@14.139.228.210) |
| 07:27.55 | *** join/#brlcad d_rossberg (~rossberg@BZ.BZFLAG.BZ) |
| 08:12.02 | *** join/#brlcad pawleeq (~pawleeq@core1.humlnet.cz) |
| 09:16.39 | *** join/#brlcad Neil___ (~chatzilla@117.229.86.232) |
| 10:00.51 | *** join/#brlcad stas (~stas@82.208.133.12) |
| 10:10.01 | *** join/#brlcad Al_Da_Best (~Al_Da_Bes@027e71f6.bb.sky.com) |
| 11:28.02 | *** join/#brlcad cy8org (cy8org@115.241.10.247) |
| 11:51.05 | *** join/#brlcad cy8org (cy8org@115.241.10.247) |
| 11:51.21 | *** part/#brlcad cy8org (cy8org@115.241.10.247) |
| 11:55.48 | *** join/#brlcad Stattrav (~Stattrav@61.12.114.82) |
| 11:55.48 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 11:59.50 | *** join/#brlcad stas (~stas@82.208.133.12) |
| 12:01.23 | *** join/#brlcad witness123 (~witness@14.139.228.210) |
| 12:53.12 | *** join/#brlcad andrei (~andrei@188.25.158.89) |
| 12:53.32 | andrei | Good afternoon! |
| 12:54.35 | Al_Da_Best | Hi |
| 12:55.15 | brlcad | good morning! |
| 12:57.20 | andrei | I have had 6 classes already , morning is far far away for me :) |
| 12:57.28 | brlcad | ~ugt |
| 12:57.29 | ibot | it has been said that ugt is Universal Greeting Time. Created in #mipslinux, it is a rule that states that whenever somebody enters an IRC channel it is always morning, and it is always late when the person leaves. The local time of any other people in the channel, including the greeter, is irrelevant. http://www.total-knowledge.com/~ilya/mips/ugt.html |
| 12:58.05 | andrei | alright |
| 12:58.08 | andrei | I appologise |
| 12:58.24 | brlcad | it's meant to be funny, not so serious :P |
| 12:58.44 | andrei | hehe |
| 12:58.48 | andrei | In channels like #apache |
| 12:58.50 | andrei | it's |
| 12:58.54 | andrei | Good < every part of the day> |
| 13:03.07 | andrei | I m trying to get the functional part of my test unit |
| 13:03.08 | andrei | working |
| 13:03.14 | andrei | and I believe I m close to it |
| 13:03.34 | andrei | so I can "tune" it a bit to look better |
| 13:29.07 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) |
| 13:35.07 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) |
| 13:43.46 | andrei | Brlcad |
| 13:44.08 | andrei | I have completed the test unit |
| 13:44.26 | andrei | that adds nodes, erases , searches and displays them |
| 13:44.31 | andrei | searches one random node |
| 13:44.51 | andrei | my " visit' function is actually the display one |
| 13:45.07 | andrei | what should I further try |
| 13:45.14 | andrei | I mean should I try the rotate functions |
| 13:46.57 | andrei | ? |
| 13:53.49 | CIA-128 | BRL-CAD: 03erikgreenwald * r49760 10/brlcad/trunk/src/libicv/fileformat.c: use _DEFAULT png flags instead of _BASE |
| 13:54.37 | brlcad | andrei: that's awesome |
| 13:54.48 | andrei | well |
| 13:54.52 | brlcad | if you can find a way to use all of the public API functions listed in bu.h, that would be ideal |
| 13:55.05 | brlcad | you say "well" a lot :) |
| 13:55.16 | andrei | that's because I like water :p |
| 13:55.17 | brlcad | I think I counted 5 times yesterday |
| 13:55.30 | brlcad | er, day before |
| 13:55.51 | brlcad | just funny, no worries |
| 13:55.52 | andrei | I have several annoying habits I will probably have to get rid of |
| 13:55.59 | andrei | no more coding in a cave for me , hopefully:) |
| 13:56.05 | brlcad | well |
| 13:56.07 | brlcad | hopefully ;) |
| 14:01.38 | andrei | On a serious note, I really apologize if some of my "habits" are annoying. If it happens please let me know, I usually open to criticism:) |
| 14:01.43 | andrei | I'm* |
| 14:21.11 | *** join/#brlcad stas (~stas@82.208.133.12) |
| 14:53.03 | *** join/#brlcad gnn (~chatzilla@122.167.12.43) |
| 14:54.24 | *** join/#brlcad Neil____ (~chatzilla@117.229.81.38) |
| 15:35.25 | andrei | I have copied the function "search" in my test file and modified it to return the node structure instead of the void* ( I need it for the rotate functions) , is this the right way to do it? I haven't found a function to do this |
| 15:35.53 | andrei | the "search" refers to red black tree search function |
| 15:39.59 | andrei | I found an alternative, nvm :) |
| 15:40.47 | *** part/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) |
| 15:50.09 | CIA-128 | BRL-CAD: 03starseeker * r49761 10/brlcad/trunk/ (CMakeLists.txt INSTALL): Fix description of debug option - no longer conditional, we're using 'em all the time unless explicitly told not to. |
| 15:59.03 | CIA-128 | BRL-CAD: 03starseeker * r49762 10/brlcad/trunk/src/other/CMakeLists.txt: Downcase some CMake macros... |
| 16:04.32 | *** join/#brlcad Neil___ (~chatzilla@117.229.81.38) |
| 17:20.28 | CIA-128 | BRL-CAD: 03starseeker * r49763 10/brlcad/trunk/ (10 files in 9 dirs): Rework handling of config.h files, with an eye towards hitting the disk less - seems to shave a couple seconds off the configure process on Linux. |
| 17:30.09 | brlcad | andrei: on a more serious note, your habits aren't annoying (at least not yet) :) |
| 17:32.44 | brlcad | as for the void*, you could cast that to a node pointer .. I'd wonder why it was made a void* in the first place .. might not be what it seems to be |
| 17:35.30 | *** join/#brlcad jordisayol (~jordisayo@unaffiliated/jordisayol) |
| 17:36.02 | starseeker | little bit more improvement on the Mac... saved about 8 seconds, give or take... |
| 17:42.53 | CIA-128 | BRL-CAD: 03starseeker * r49764 10/brlcad/trunk/CMakeLists.txt: update description |
| 17:48.43 | andrei | <PROTECTED> |
| 17:49.10 | *** join/#brlcad abhi2011 (~chatzilla@119.226.184.246) |
| 17:49.16 | andrei | the function defined in bu.h returns rb_data(node, order); |
| 17:49.26 | andrei | so casting it to a structure causes a segfault |
| 17:52.19 | andrei | I didn't want to edit bu.h ( or at least not yet ) so I just took the curent tree node |
| 17:52.26 | *** join/#brlcad ksuzee (c1976953@gateway/web/freenode/ip.193.151.105.83) |
| 17:58.01 | andrei | anyway, resuming the bu.h functions testing so I'll be arround. |
| 18:07.14 | brlcad | I'm not sure I follow what the problem is |
| 18:07.38 | brlcad | if you had to modify existing bu source code, that is worth understanding in more depth |
| 18:08.54 | andrei | yes, that's why I avoided doing it :) |
| 18:09.39 | andrei | the problem was that the rotate tree function needed a node parameter and there is no specific function ( or at least I haven't seen it ) to retrieve a specific node |
| 18:09.48 | andrei | but it's fixed so doesn't matter |
| 18:10.20 | brlcad | you avoided doing it, so you didn't? |
| 18:10.28 | andrei | I did not edit bu.h |
| 18:10.30 | andrei | :) |
| 18:10.30 | brlcad | it sounded like you said you did made a mod earlier |
| 18:10.44 | brlcad | bu.h is just a header, did you have to modify any of the rb_*.c files |
| 18:10.44 | andrei | well at first I copied the function from bu.h |
| 18:10.50 | andrei | only mine |
| 18:10.56 | andrei | which is test_rbtree |
| 18:10.58 | andrei | :) |
| 18:10.58 | brlcad | what does that mean? |
| 18:11.07 | brlcad | so "no" |
| 18:11.15 | andrei | yes.."no" |
| 18:11.31 | brlcad | okay, just looking for clarity -- it sounded like you had |
| 18:11.41 | brlcad | so then how did you get a node? |
| 18:12.11 | andrei | using the normal search function, I used te the search one to look for a data ( I knew what data I was looking for) |
| 18:12.22 | andrei | then the node pointer was positioned ( by the function ) exactly where I needed it to be |
| 18:12.39 | andrei | and I used TestTree->node ( which is the curent node of my RBtree instance) |
| 18:12.57 | brlcad | so you just misunderstood the API the first time is what basically happened? |
| 18:13.05 | andrei | nope |
| 18:13.24 | andrei | for example the function walk |
| 18:13.29 | andrei | moves from node pointer to node pointer |
| 18:13.45 | andrei | function search stops when it finds the require node and although it does not retrieve the node pointer |
| 18:13.48 | andrei | it is still there |
| 18:14.08 | brlcad | please be specific, do you mean bu_rb_walk() or rb_walk() or ... ? |
| 18:14.16 | andrei | Hold on |
| 18:14.16 | brlcad | likewise for "search" |
| 18:14.32 | andrei | I have only unsed bu_rb_* |
| 18:15.45 | brlcad | so bu_rb_search() takes a tree, order, and data |
| 18:15.50 | andrei | yes |
| 18:15.56 | andrei | and returns the data contained in the node |
| 18:16.07 | andrei | and I wanted the node |
| 18:16.31 | andrei | but since my parameter is global it remains modified after the function bu_rb_search() has ended |
| 18:16.46 | andrei | searched_value = bu_rb_search(TestTree,0,"a"); |
| 18:16.47 | andrei | bu_rb_delete(TestTree,0); |
| 18:17.03 | andrei | this sequence of code deletes the node containing the letter "a" as data |
| 18:21.08 | andrei | does it make any sense? |
| 18:24.48 | andrei | this is my output http://pastebin.com/aKwdP5th |
| 18:25.44 | brlcad | pastebin.com is inaccessible from many locations (including mine) .. maybe try pastebin.ca or debian's instead |
| 18:25.58 | andrei | just a second |
| 18:26.53 | andrei | http://pastebin.ca/2130960 |
| 18:28.37 | andrei | I m sorry for the poor explaining but here's what I did, or at least what I had in mind |
| 18:28.40 | brlcad | hm, curious that it'd still print the null/deleted node |
| 18:29.09 | andrei | it does because I specifically searched for it |
| 18:29.13 | andrei | otherwise it doesn't :) |
| 18:29.16 | brlcad | okay |
| 18:30.08 | andrei | this is where I store the red black tree |
| 18:30.10 | andrei | struct bu_rb_tree *TestTree; |
| 18:30.55 | andrei | I made it a global variable and as a result when the bu_rb_search() breaks the infinite loop ( while(1) ) { |
| 18:32.13 | andrei | the TestTree->rbt_current pointer is positioned exactly on the node that has the searched data |
| 18:32.24 | *** join/#brlcad bhinesley (~bhinesley@108.203.219.92) |
| 18:32.44 | andrei | and the bu_rb_delete() deletes by default the curent node , and that's what I did :) |
| 18:33.48 | andrei | Sorry again for beeing completely rubbish at explaining this |
| 18:34.10 | brlcad | that's good and all, how I'd expect it to work (except for the global, unnecessary) .. the confusion is that you were trying to get at a node pointer from a search |
| 18:34.31 | brlcad | and I guess you learned that you don't need to, that it'll work with the "current" node ? |
| 18:34.46 | brlcad | or is there still an issue calling burb_rotate() |
| 18:35.05 | andrei | I learned exactly what you said |
| 18:35.20 | andrei | I was at first surprised that there isn't a generic search function |
| 18:35.30 | andrei | but it s not necessary , at least for what I want to do with it. |
| 18:36.23 | brlcad | so I say again, "so you just misunderstood the API the first time is what basically happened?" |
| 18:36.30 | brlcad | sounds like "yeah, basically" :) |
| 18:36.46 | brlcad | not nope |
| 18:37.01 | brlcad | there's nothing wrong at all with misunderstanding an API, especially when you eventually figure it out! |
| 18:37.23 | brlcad | you made it sound like you'd modified libbu :) |
| 18:39.14 | andrei | looking back on our discussion |
| 18:39.20 | andrei | seems I caused all the confusion |
| 18:40.04 | andrei | Sorry for that |
| 18:41.58 | brlcad | it's all good |
| 18:42.15 | brlcad | you're probably now the defacto leading expert on libbu's redblack tree implementation ;) |
| 18:42.37 | brlcad | hasn't really worked with that part of the API in years... |
| 18:42.51 | brlcad | partly because the docs are terrible |
| 18:43.30 | andrei | I sometimes miserably fail at asking questions( as you have probably noticed) |
| 18:43.44 | andrei | but that's not because of lack of interest |
| 18:47.01 | andrei | I sometimes jump too early to the conclusion, but I will try to think more before I speak :) |
| 18:47.28 | andrei | as it's not a small easy-to-guess source, so the guessing part is over |
| 18:48.36 | brlcad | code is code, one of the great things about open source code (at least after a while) is the exposure and experience you gain being able to just jump in and ready any code |
| 18:48.51 | brlcad | regardless of style, purpose, formatting, etc |
| 18:50.33 | andrei | I wonder how much would it take me |
| 18:50.39 | andrei | to understand the whole code |
| 18:51.56 | *** join/#brlcad witness123 (~witness@14.139.228.210) |
| 18:52.07 | andrei | anyway, I ll get back to testing the libbu api , so I ll have more time to plan the technical details of my proposal |
| 18:52.29 | andrei | :) |
| 18:57.46 | *** join/#brlcad anubhavk (~user1@124.123.223.218) |
| 18:58.05 | anubhavk | Hello Sean |
| 18:59.40 | anubhavk | My skill set limits me to wander only around the web dev projects. and i was specifically interested in the benchmark Performance Databae idea. |
| 19:31.28 | ksuzee | Sean, hello! Sorry for interrupting. I'm trying to compile test_*.c files which you advised me and there're no common.h and bu.h files. What am I doing wrong? |
| 19:32.45 | andrei | how are you trying to compile them? |
| 19:33.23 | ksuzee | gcc filename |
| 19:33.28 | ksuzee | or not? |
| 19:34.30 | andrei | it wouldn't work like that because the libraries themselves(if you look the files exists ) include other files |
| 19:34.49 | andrei | do you have the svn source? |
| 19:35.28 | andrei | <PROTECTED> |
| 19:35.48 | andrei | you can either download the virtualbox ( which has everything setup for it) or download the svn file from sourceforge |
| 19:36.02 | ksuzee | I, ve just done it |
| 19:36.11 | ksuzee | Sean told yesterday |
| 19:36.17 | andrei | downloading the virtualbox |
| 19:36.21 | andrei | or the svn? |
| 19:36.38 | ksuzee | VB |
| 19:36.45 | andrei | well |
| 19:36.47 | ksuzee | then I did this |
| 19:36.49 | ksuzee | $ cd ; cd brlcad-build $ cmake ../brlcad-svn |
| 19:36.58 | ``Erik | <-- shakes fist at rt's -B for not being move obvious |
| 19:37.25 | andrei | what does it say when you run that ksuzee? |
| 19:38.37 | ksuzee | hm |
| 19:38.48 | ksuzee | it ended succesfully |
| 19:38.58 | andrei | then you should just run |
| 19:38.59 | ksuzee | and I did "make" |
| 19:38.59 | andrei | make |
| 19:39.15 | andrei | then you have the binaries |
| 19:39.31 | andrei | they are located in /brlcad-build/bin |
| 19:39.32 | andrei | I believe |
| 19:39.36 | andrei | one second, I ll check |
| 19:39.58 | andrei | here : |
| 19:40.06 | andrei | <PROTECTED> |
| 19:40.32 | ``Erik | andrei: I'd argue that it's impossible to fully understand all the code... by the time you got to 'the end', stuff would have changed behind you :) we tend to have focus areas and rely on eachother |
| 19:40.58 | andrei | it was just a hyptotehnical question |
| 19:41.13 | andrei | and it was more like have a good general idea of it |
| 19:41.29 | CIA-128 | BRL-CAD: 03n_reed * r49765 10/brlcad/trunk/src/other/ (step/config/ step.dist): remove unused config/* |
| 19:41.31 | CIA-128 | BRL-CAD: 03r_weiss * r49766 10/brlcad/trunk/src/libged/wdb_obj.c: Updated file 'wdb_obj.c' adding 'get' into the command list. This change fixes a bug which incorrectly showed that 'get' is not one of the possible parameters to 'db'. |
| 19:42.38 | andrei | ksuzee: did you find what you were looking for? |
| 19:42.43 | ``Erik | I'm coming up on 10 years and there're a few bits that're still black boxes to me, but a pretty good feel for general organization and how the major pieces fit together can be attained very quickly, it's pretty well divided and documented for the most part |
| 19:44.18 | bhinesley | I'm coming in around 4 months, and I only know about some of the black boxes :) |
| 19:44.40 | andrei | uhm.. |
| 19:44.44 | andrei | I know red black trees ! |
| 19:46.43 | andrei | Erik , if I may ask |
| 19:46.49 | andrei | why sourceforge instead of github? |
| 19:46.58 | andrei | It's just a curiosity of mine:) |
| 19:47.12 | ``Erik | andrei: because there was no github when we went open source |
| 19:47.40 | ``Erik | the cffi wrapper for BRL-CAD I'm planning on eventually contemplating working on will be on github... |
| 19:48.32 | andrei | ah |
| 19:48.34 | ``Erik | like at https://github.com/erikg/brlcad-cffi but probably renamed to cl-brlcad or something |
| 19:48.51 | andrei | Nothing to see here yet. Move along. |
| 19:49.00 | andrei | lol |
| 19:49.17 | ``Erik | ah, I get the 'steps to init a new repo', I clicked 'create project' 11 months ago, according to github |
| 19:49.33 | *** join/#brlcad ksuzee (c1976953@gateway/web/freenode/ip.193.151.105.83) |
| 19:49.57 | *** join/#brlcad merzo (~merzo@14-79-200-46.pool.ukrtel.net) |
| 19:52.33 | andrei | :) |
| 19:58.17 | CIA-128 | BRL-CAD: 03starseeker * r49767 10/brlcad/trunk/src/ (conv/step/CMakeLists.txt other/CMakeLists.txt): Make sure fedex output depends on fedex_plus build target |
| 20:08.05 | *** join/#brlcad leavittx (~leavittx@89.221.199.187) |
| 20:08.35 | andrei | function bu_hash_add_entry has an int parameter called new_entry |
| 20:09.08 | andrei | isn't is used only as a found/not found flag? if it is , why is it a parameter? |
| 20:09.51 | andrei | http://pastebin.ca/2130974 |
| 20:12.22 | bhinesley | it looks like it's the data being added to me |
| 20:13.03 | bhinesley | n/m |
| 20:14.07 | ``Erik | because C doesn't do multiple value returns |
| 20:14.17 | bhinesley | ^--what he said :) |
| 20:14.21 | andrei | aaah |
| 20:14.24 | andrei | that make sense |
| 20:14.34 | andrei | makes even |
| 20:15.23 | ``Erik | (kinda common pattern is returnval0 = myfunc(args, &returnval1, &returnval2); to fake it) |
| 20:17.21 | ``Erik | less bad than using globals *shrug* |
| 20:19.28 | ``Erik | not as cool as (defun myfunc () (values a b c)) ... (multiple-value-bind (a b c) (myfunc) ...) though... O:-) |
| 20:49.51 | ``Erik | (yowza, throw a little common lisp in chan and it completely kills the party O.o ) |
| 20:50.07 | bhinesley | hehe who knows listp |
| 20:50.09 | bhinesley | *lisp |
| 20:50.16 | andrei | lisp? |
| 20:50.19 | andrei | << I will soon |
| 20:50.25 | andrei | know a some Scheme |
| 20:50.28 | andrei | and a bit of Haskell |
| 20:51.39 | andrei | We re going to study it at the Programming Paradigms course |
| 20:51.45 | andrei | :) |
| 20:52.06 | andrei | Erik, do you know lisp? |
| 20:53.10 | bhinesley | apparently |
| 20:53.15 | ``Erik | some, but it's a big language... :) I've been using it quite a bit in personal projects and sneaking some into work |
| 20:53.27 | andrei | perfect *evil grin* |
| 20:54.16 | ``Erik | http://elfga.com/adage is a UCW webapp that emulates fortune(1) (with most of the data ripped from various fortune db's) |
| 20:54.43 | andrei | as bhinesley said, not many people know lisp |
| 20:55.11 | ``Erik | ralith used to chum here, he's in #lisp and #lispgames |
| 20:55.52 | bhinesley | kinda niche these days, it seems: http://www.tiobe.com/index.php/paperinfo/tpci/Lisp.html |
| 20:56.30 | andrei | last year the google AI challenge was one by someone coding in Lisp |
| 20:56.47 | ``Erik | *shrug* seems to have exploded in growth the last few years with a new generation discovering it... python and ruby got people to open their eyes to other languages, possibly |
| 20:57.49 | andrei | it s just : lots of irritating silly parentheses |
| 20:57.55 | ``Erik | (~13 years ago, I was introduced to scheme and derided it for every lame excuse in the book, starting with the parens... now I'm a fan :) |
| 20:59.00 | bhinesley | obligatory: http://xkcd.com/224/ |
| 20:59.59 | ``Erik | http://xkcd.com/297/ |
| 21:00.23 | andrei | <PROTECTED> |
| 21:00.40 | bhinesley | I think that was all of 'em :) |
| 21:00.44 | ``Erik | heads out, catch ya'll later |
| 21:00.50 | bhinesley | waves |
| 21:01.04 | andrei | Good evening! |
| 21:02.09 | andrei | bhinesley, aside of the last year project |
| 21:02.18 | andrei | what are you working on , if I may ask? |
| 21:06.31 | bhinesley | just preping for finals right now, I don't have any other projects at the moment |
| 21:07.55 | bhinesley | Programming Languages, Networking, and AI |
| 21:08.05 | bhinesley | networking is kind of intense |
| 21:09.06 | andrei | finals? |
| 21:10.05 | bhinesley | final exams (tests) |
| 21:10.24 | andrei | ah |
| 21:10.39 | andrei | I was thinking of some competition - finals |
| 21:10.49 | bhinesley | hehe |
| 21:12.08 | andrei | looking over all this code this days |
| 21:12.28 | andrei | think it will help me read code easier |
| 21:12.44 | bhinesley | I was participating in the stripe.com CTF contest, but I gave up on the 4th level, since I don't know assembly (needed to inject shellcode) |
| 21:13.24 | andrei | hmm |
| 21:13.37 | andrei | hence modern compilers don t necessarly require one to know assembly |
| 21:13.40 | bhinesley | andrei: there is so much code, you can read forever... go deep not wide :) |
| 21:14.40 | andrei | :) |
| 21:14.42 | bhinesley | assmebly is required for my degree, I just haven't taken it yet |
| 21:14.56 | andrei | I know a very, very slight bit of assembly |
| 21:15.08 | andrei | for example to write a bubble sort in it |
| 21:15.17 | andrei | or stuff like that |
| 21:16.04 | bhinesley | I can't write a lick :) easy enough to read and get this gist though |
| 21:16.30 | andrei | well I supposedly studied it for 6 months |
| 21:16.47 | bhinesley | haha, "supposedly"? |
| 21:16.56 | andrei | unfortunately the teacher was involved in some government projects |
| 21:17.03 | andrei | and came to like 40% of the classes |
| 21:17.40 | bhinesley | your terms are 6 months? |
| 21:18.04 | andrei | oh I terribly fail |
| 21:18.08 | andrei | 3 months ,not 6 |
| 21:18.28 | andrei | was thinking about normal year |
| 21:18.33 | andrei | we have 2 semesters of 14 weeks each |
| 21:18.41 | bhinesley | ah okay |
| 21:18.47 | bhinesley | gtg, i'll ttyl |
| 21:18.59 | andrei | see you around :) |
| 21:21.59 | CIA-128 | BRL-CAD: 03bob1961 * r49768 10/brlcad/trunk/src/other/tktable/generic/tkTable.h: Change the default background and foreground settings on windows. |
| 21:58.05 | CIA-128 | BRL-CAD: 03bob1961 * r49769 10/brlcad/trunk/src/tclscripts/archer/ (Archer.tcl ArcherCore.tcl): Mods to center the various help dialogs over the main application. |
| 21:59.06 | *** join/#brlcad stas (~stas@82.137.11.244) |
| 22:11.42 | CIA-128 | BRL-CAD: 03starseeker * r49770 10/brlcad/trunk/misc/CMake/multiconfig_path_read.cmake.in: don't need the wildcard here... |
| 22:16.19 | andrei | Im off to sleep, will probably finish the rest of tests tomorrow. Good night everyone! |
| 23:03.39 | CIA-128 | BRL-CAD: 03starseeker * r49771 10/brlcad/trunk/src/other/step/ (CMake/ CMakeLists.txt cmake/): go with the mpictor github capitalization |
| 23:04.04 | *** join/#brlcad diakatana (~diakatana@c-68-37-59-103.hsd1.nj.comcast.net) |
| 23:04.45 | *** part/#brlcad diakatana (~diakatana@c-68-37-59-103.hsd1.nj.comcast.net) |
| 23:13.22 | CIA-128 | BRL-CAD: 03starseeker * r49772 10/brlcad/trunk/src/other/step/ (AUTHORS COPYING ChangeLog INSTALL NEWS README TODO): |
| 23:13.22 | CIA-128 | BRL-CAD: Go ahead and sync the toplevel files from |
| 23:13.22 | CIA-128 | BRL-CAD: https://github.com/mpictor/StepClassLibrary - not all of them apply to our |
| 23:13.22 | CIA-128 | BRL-CAD: branch as yet, but the idea is to sync the two trees so get these out of the |
| 23:13.22 | CIA-128 | BRL-CAD: diff. Eventually we'll have a patch to submit back to the github project, so |
| 23:13.22 | CIA-128 | BRL-CAD: updates to these files for things like re2c/lemon will be part of that. |
| 23:21.21 | CIA-128 | BRL-CAD: 03starseeker * r49773 10/brlcad/trunk/src/other/ (5 files in 2 dirs): Add other toplevel files, update step.dist |
| 23:25.45 | CIA-128 | BRL-CAD: 03n_reed * r49774 10/brlcad/trunk/src/other/ (step/src/clivfasd/ step.dist): remove SCL clivfasd; deemed obsolete and removed from mpictor git repo in a0353bc |
| 23:38.28 | CIA-128 | BRL-CAD: 03starseeker * r49775 10/brlcad/trunk/CMakeLists.txt: ws |
| 23:40.23 | *** join/#brlcad minalb (~diakatana@c-68-37-59-103.hsd1.nj.comcast.net) |