| 00:06.53 | CIA-128 | BRL-CAD: 03starseeker * r49728 10/brlcad/trunk/misc/CMake/CompilerFlags.cmake: Whoops - not appending here. |
| 00:17.37 | CIA-128 | BRL-CAD: 03starseeker * r49729 10/brlcad/trunk/misc/CMake/CompilerFlags.cmake: Restructure - try not to run tests we don't need to run (if we've already go the 64 bit flag, don't need to test the rest. |
| 00:19.46 | CIA-128 | BRL-CAD: 03starseeker * r49730 10/brlcad/trunk/misc/CMake/BRLCAD_CompilerFlags.cmake: copy/paste strikes again |
| 00:48.58 | CIA-128 | BRL-CAD: 03starseeker * r49731 10/brlcad/trunk/misc/CMake/CompilerFlags.cmake: Tweak Debug flag handling |
| 01:04.21 | starseeker | ah - that's better |
| 01:06.11 | CIA-128 | BRL-CAD: 03starseeker * r49732 10/brlcad/trunk/misc/CMake/BRLCAD_CompilerFlags.cmake: whoops - stray macro name holdout |
| 01:37.20 | brlcad | starseeker: ah, I thought I mentioned that site a long while back |
| 01:37.43 | brlcad | great resource for step models, I have GBs of data from there |
| 01:51.45 | brlcad | so yes, to all, we were accepted into GSoC again this year! woot! |
| 03:37.22 | brlcad | our gsoc profile is now properly filled out: http://www.google-melange.com/gsoc/org/google/gsoc2012/brlcad |
| 03:58.07 | brlcad | been thinking about the hyphen on the new logo, feedback appreciated on the three BRL-CAD_gear_logo_*.png files in http://brlcad.org/tmp/. |
| 04:00.59 | starseeker | brlcad: is there a reason the "over" image doesn't have the graphic centered over the text? |
| 04:03.30 | starseeker | I'd probably take that over the other two... |
| 04:06.59 | *** join/#brlcad ardahal (0e8b55c1@gateway/web/freenode/ip.14.139.85.193) |
| 04:08.45 | starseeker | what about something like this but with thicker "CAD" text? http://brlcad.org/~starseeker/logo_test.png |
| 04:22.50 | brlcad | no reason other than it was smaller when I was playing with that idea, and it looked more appropriate balanced over the A at that size |
| 04:23.15 | brlcad | like what you did there though, that is nice fully balanced |
| 04:24.09 | brlcad | the CAD text and the BRL text are presently intentionally unbalanced (so it stylistically matches the links) |
| 04:25.01 | brlcad | the more I see it, the more it's been growing on me, I must admit -- though I'd be interested in seeing the opposite (BRL light, CAD bold) |
| 04:25.39 | starseeker | would probably work better on a light background - firefox is happening to display it on a dark grey bg |
| 04:29.12 | starseeker | the "mid" layout might do well for a "banner" configuration, although I'd prefer the text a bit larger personally... |
| 04:32.21 | brlcad | do you now if anyone else been able to give the vm image a try? |
| 04:33.00 | brlcad | so it sounds like either way, you're more keen on the hyphen at hyphen height, not connecting the L->C like a hinge |
| 04:33.38 | brlcad | hard to see at that smaller size, but that "hyphen" is actually the same chain link as the bigger three, just with two links |
| 04:48.36 | starseeker | is trying to download the vm |
| 05:11.04 | *** join/#brlcad atneik (3bb22dec@gateway/web/freenode/ip.59.178.45.236) |
| 05:16.27 | *** part/#brlcad atneik (3bb22dec@gateway/web/freenode/ip.59.178.45.236) |
| 06:40.08 | *** join/#brlcad abhi2011 (~chatzilla@119.226.184.246) |
| 09:50.28 | *** join/#brlcad Georgiy (4e8bd6a9@gateway/web/freenode/ip.78.139.214.169) |
| 10:44.16 | *** join/#brlcad abhi2011 (~chatzilla@119.226.184.246) |
| 11:03.02 | *** join/#brlcad simion314 (~quassel@109.96.4.109) |
| 11:40.00 | brlcad | Georgiy: absolutely, but we prefer to hold all of our discussions openly so everyone can benefit |
| 11:40.28 | brlcad | Georgiy: perhaps you can describe exactly what you're thinking of doing in an e-mail to the brlcad-devel mailing list? |
| 12:26.55 | *** join/#brlcad andrei (~andrei@188.25.161.208) |
| 12:27.09 | *** part/#brlcad andrei (~andrei@188.25.161.208) |
| 12:55.35 | brlcad | Georgiy: what sort of work have you done already? |
| 13:14.56 | *** join/#brlcad ibot_ (~ibot@rikers.org) |
| 13:14.56 | *** topic/#brlcad is BRL-CAD Open Source Solid Modeling || http://brlcad.org || logs: http://ibot.rikers.org/%23brlcad/ || BRL-CAD release 7.22.0 is forthcoming (eta: end of March) || BRL-CAD has applied to participate in GSoC 2012! |
| 13:47.40 | Georgiy | brlcad: i'm working on vector signal analyzing and generating software for telecomunication technologies (including signal processing). It is big project, we (me and my team) already have spended 2 years for it, and it's not ready (there is a lot of work), in fact this is my first programming project. Also I've partisipiated in two projects where i've done gui (using Qt) |
| 13:48.24 | Georgiy | brlcad: and plugin for EEGLab (using matlab and C) for 2D & 3D graphs comparison and classification. |
| 13:57.03 | Georgiy | brlcad: i can give you a link to eeglab plugin wiki but you need know russian :) |
| 14:42.06 | *** join/#brlcad simion314 (~quassel@109.96.4.109) |
| 14:56.53 | *** part/#brlcad Georgiy (4e8bd6a9@gateway/web/freenode/ip.78.139.214.169) |
| 14:58.24 | *** join/#brlcad Georgiy (4e8bd6a9@gateway/web/freenode/ip.78.139.214.169) |
| 15:28.15 | *** join/#brlcad simion314 (~quassel@109.96.4.109) |
| 16:14.36 | CIA-128 | BRL-CAD: 03starseeker * r49733 10/brlcad/trunk/ (CMakeLists.txt misc/CMake/BRLCAD_CompilerFlags.cmake): Tweak optimization flag handling. |
| 16:16.10 | CIA-128 | BRL-CAD: 03starseeker * r49734 10/brlcad/trunk/misc/CMake/CompilerFlags.cmake: We're not doing anything specifically with MinSizeRel as yet, so don't wipe CMake's version. |
| 16:16.10 | *** join/#brlcad razoraxon (0e8b5206@gateway/web/freenode/ip.14.139.82.6) |
| 16:22.27 | CIA-128 | BRL-CAD: 03starseeker * r49735 10/brlcad/trunk/misc/CMake/BRLCAD_Summary.cmake: add spacer |
| 16:47.25 | CIA-128 | BRL-CAD: 03starseeker * r49736 10/brlcad/trunk/misc/CMake/distcheck_repo_verify.cmake.in: Add a note suggesting enabling all bundled libs for distcheck, if that has not already been done. |
| 18:20.21 | CIA-128 | BRL-CAD: 03starseeker * r49737 10/brlcad/trunk/misc/CMake/ (Distcheck.cmake distcheck_repo_verify.cmake.in): Few minor tweaks to distcheck |
| 18:22.29 | *** join/#brlcad Stattrav (~Stattrav@223.190.200.213) |
| 18:22.29 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 18:27.09 | Stattrav | hey folks |
| 18:27.40 | Stattrav | Shall come back when Sean is active. |
| 18:32.33 | Stattrav | I wanted to talk about the web development idea implementations. |
| 19:14.37 | *** join/#brlcad simion314 (~quassel@109.96.4.109) |
| 19:45.55 | brlcad | Stattrav: sean is usually active, just not always on irc -- best to just ask/say what you want and read the resonse(s) in backlog |
| 19:46.17 | brlcad | someone else is just as likely able to answer questions, and you'll be helped much more quickly ;) |
| 19:47.37 | Stattrav | btw I was reading through the web development Idea, so what is needed is a two way sync between docbook and mediawiki aint it ? |
| 19:47.52 | brlcad | which web dev idea? |
| 19:48.12 | brlcad | we have a lot of potential web work |
| 19:48.12 | Stattrav | Synchronize with Docbook |
| 19:48.45 | brlcad | ah yeah, that could be either through mediawiki or drupal frankly |
| 19:48.55 | brlcad | ideally, it could be something else too really |
| 19:49.12 | Stattrav | If I were to start with the webwork, benchmark db |
| 19:49.23 | Stattrav | would be where I'd like to start. |
| 19:49.26 | brlcad | something that is more modular that fits in with an existing framework would probably get more widespread use |
| 19:49.36 | Stattrav | so could you help me understand the problem better ? |
| 19:49.56 | Stattrav | so what you are currently using is a mediawiki aint it ? |
| 19:49.57 | brlcad | the BRL-CAD benchmark is one of my favorite golden nuggets within our codebase |
| 19:50.13 | brlcad | we presently use drupal+mediawiki+gallery2 |
| 19:51.02 | brlcad | so for the benchmark project, the best way to explain it is to probably run the brl-cad benchmark on your own system |
| 19:51.27 | Stattrav | so one needs to build a web API for the submissions of the logs when when runs the benchmark on the individual's system |
| 19:51.43 | brlcad | right, that's the basic idea |
| 19:52.03 | Stattrav | and then the web end needs to parse the log file with the regexes and store it according to the db schema ? |
| 19:52.09 | brlcad | or at least a processing system that reads logs from a mail directory or something similar |
| 19:52.25 | Stattrav | yes |
| 19:52.36 | brlcad | or both :) |
| 19:52.54 | brlcad | the easier it is to submit, the more useful the system will be, obviously |
| 19:53.24 | Stattrav | Ideally, reading from the mail directory can be a wrapper over the web API |
| 19:53.29 | brlcad | just will need some mechanism for manually loading logs since some will come from systems that have no networking |
| 19:53.47 | Stattrav | yes. |
| 19:54.24 | Stattrav | One could also provide an "upload" page ? |
| 19:54.26 | brlcad | Stattrav: are you familiar with CIA? |
| 19:54.48 | Stattrav | not really. Just know what it is |
| 19:55.11 | brlcad | http://cia.vc/doc/development/ |
| 19:55.33 | brlcad | that's way overkill for this, but it's an example of a multi-input processing system that works sublime |
| 19:55.54 | Stattrav | ohh |
| 19:56.43 | Stattrav | We had something like this where I was working before getting back into academia |
| 19:57.29 | Stattrav | you were referring to the diagram. werent you ? |
| 19:59.33 | Stattrav | brlcad: so could I ask what are the targets for the summers and as said the remnants could be developed later. |
| 20:05.43 | brlcad | yes, the diagram |
| 20:06.03 | Stattrav | so a {submission infrastructure} -> {data extraction} -> {db} -> {analysis} |
| 20:07.56 | brlcad | the summer target would be more about getting the database in place with a processing backend working with a live front end |
| 20:08.10 | brlcad | the analysis has mostly already happened and is in the report |
| 20:08.26 | brlcad | so it's just aggregate reporting via the web interface |
| 20:09.17 | brlcad | i'd keep that aspect very simple -- enough to submit a new entry and see how it fits in with other results in the database |
| 20:09.44 | Stattrav | aah k. Let me write the draft proposal for the submission ifrastructure, data extraction and storage. Once that is done, I shall ping you for for some comments. |
| 20:10.00 | brlcad | coding complete would be a real emphasis for that project, making sure the system is not in a partially complete state at most any point of development as much possible |
| 20:10.10 | brlcad | that sounds great |
| 20:10.36 | brlcad | if you have a brl-cad install, just run the "benchmark" command and you'll see the report it generates |
| 20:10.40 | Stattrav | yes |
| 20:10.50 | Stattrav | done that |
| 20:11.33 | brlcad | that's basically it, the master run-*benchmark.log file is what we're working with |
| 20:12.52 | Stattrav | btw I have applied to brlcad before but did not get through :) This was my proposal http://brlcad.org/wiki/User:Hippieindamakin87 |
| 20:13.06 | brlcad | I remember you ;) |
| 20:13.11 | Stattrav | I've worked with Sahana the year BRLCAD did not apply |
| 20:13.23 | Stattrav | and then work and then this year back to academia. |
| 20:13.48 | brlcad | graduate-level or more undergrad? |
| 20:13.59 | Stattrav | grad-level |
| 20:14.21 | Stattrav | MSc http://www.cmi.ac.in/~suryajith/ |
| 20:15.29 | brlcad | if I recall correctly, you were underconsideration, but just didn't seem to have enough technical background for the (substantially hard) project you were interested in working on |
| 20:15.39 | Stattrav | true :) |
| 20:17.03 | Stattrav | shall be back later, classes in the morning. (2am here) |
| 20:17.26 | brlcad | I think you not only promised implementing robust brep evaluation but also implementing an entire exact precision computing library on top of CSG conversion to BREP to boot |
| 23:24.03 | *** join/#brlcad b0ef (~b0ef@175.134.202.84.customer.cdi.no) |
| 23:33.28 | CIA-128 | BRL-CAD: 03starseeker * r49738 10/brlcad/trunk/TODO: it was tkhtml3 |
| 23:51.38 | *** join/#brlcad stas (~stas@188.24.46.106) |
