| 00:51.48 | brlcad | ``Erik: what size? |
| 01:01.56 | ``Erik | 1:18 |
| 01:02.29 | ``Erik | an old team losi mini-t pro I bought at the same time as the micro-t's, just hadn't gotten around to buying stuff like the radio, speed controller, battery, etc |
| 01:03.31 | ``Erik | http://www.rchobbies.org/losi_mini-t.htm |
| 01:04.41 | ``Erik | same size 'n stuff, but the 'pro' is made for racing, so doesn't come with a lot of the parts, expecting ya to configure it how ya want it |
| 01:05.24 | ``Erik | http://www.atomicmods.com/Products/Team-Losi-Mini-T-Pro-1-18-Stadium-Truck-ARR__12575.aspx |
| 01:09.12 | *** join/#brlcad IriX64 (~IriX64@bas2-sudbury98-1177593151.dsl.bell.ca) |
| 01:14.42 | brlcad | mm, awesome |
| 01:14.56 | brlcad | have a 1:18 that I should dust off sometime |
| 01:20.00 | CIA-88 | BRL-CAD: 03starseeker * r40415 10/brlcad/branches/cmake/ (CMakeLists.txt misc/CMake/FindTCL.cmake): |
| 01:20.00 | CIA-88 | BRL-CAD: Tcl/Tk packages need to know where the *Config.sh files are, and have |
| 01:20.00 | CIA-88 | BRL-CAD: exec-prefix set to avoid writing to places they don't have permission to write. |
| 01:20.00 | CIA-88 | BRL-CAD: This MAY imply that there is no need to look for headers if the config files |
| 01:20.00 | CIA-88 | BRL-CAD: aren't found, but need to think about that - right now that's the effect of the |
| 01:20.01 | CIA-88 | BRL-CAD: FindTCL variables, so the include stuff in the section section can probably go |
| 01:20.01 | CIA-88 | BRL-CAD: unless there's a need to have headers without config files. |
| 02:46.46 | *** join/#brlcad louipc (~louipc@archlinux/trusteduser/louipc) |
| 03:17.07 | starseeker | blinks - tkhtml isn't installing libTkhtml... |
| 03:17.33 | louipc | recent developments? |
| 03:20.39 | starseeker | hmm? you mean what's happening? |
| 03:22.43 | starseeker | brlcad: can you check me? it looks like tkhtml isn't installing its library |
| 03:26.15 | starseeker | make a note of this page for tcl/tk package require path stuff: http://wiki.tcl.tk/1628 |
| 03:29.45 | CIA-88 | BRL-CAD: 03starseeker * r40416 10/brlcad/branches/cmake/ (CMakeLists.txt misc/CMake/ThirdParty.cmake): Start tweaking to make the default behavior of the CMake build identical to the 'auto-detection' of the autotools build. Need to think about enable-all and disable-all mechanisms, and write FindOPENNURBS and FindUTAHRLE |
| 03:39.44 | brlcad | starseeker: hm |
| 03:43.57 | brlcad | looks like you're right -- that's rather odd |
| 03:44.24 | brlcad | ahh, right .. there's an existing install rule |
| 03:44.27 | brlcad | overrides libtool |
| 03:56.57 | brlcad | there, now it should install |
| 03:57.09 | CIA-88 | BRL-CAD: 03brlcad * r40417 10/brlcad/trunk/src/other/tkhtml/Makefile.am: don't declare an install: rule since that will override libtool. instead, let tkhtml do what it was doing with a install-data-local: hook with the same deps. |
| 03:59.00 | brlcad | that has subsequently diverged quite a ways away from tea |
| 05:49.58 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 06:13.28 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 06:22.58 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 07:02.31 | *** join/#brlcad merzo (~merzo@smartbussiness.mobicom.net.ua) |
| 08:27.02 | *** join/#brlcad Stattrav (~Stattrav@unaffiliated/stattrav) |
| 09:45.06 | *** join/#brlcad mafm (~mafm@83.45.72.205) |
| 12:03.38 | *** join/#brlcad mafm (~mafm@83.45.72.205) |
| 12:12.23 | *** join/#brlcad Zaebos (~irc@pd95b7f5e.dip0.t-ipconnect.de) |
| 12:20.48 | CIA-88 | BRL-CAD: 03starseeker * r40418 10/brlcad/branches/cmake/src/other/tkhtml/ (. Makefile.am): Grab tkhtml install fix from trunk |
| 12:32.47 | CIA-88 | BRL-CAD: 03starseeker * r40419 10/brlcad/branches/cmake/src/other/tkhtml/Makefile.am: Library is ending up in parent directory for tkhtml - alter where pkgIndex is looking. |
| 12:34.08 | CIA-88 | BRL-CAD: 03starseeker * r40420 10/brlcad/trunk/src/other/tkhtml/Makefile.am: Make same change to pkgIndex in trunk |
| 13:06.48 | CIA-88 | BRL-CAD: 03brlcad * r40421 10/brlcad/trunk/BUGS: menu invocation is not working again? hrm. |
| 13:12.09 | CIA-88 | BRL-CAD: 03brlcad * r40422 10/brlcad/trunk/src/other/tkhtml/Makefile.am: you don't put slashes on a file join, they're space-separated and tcl does it's magic for the given platform |
| 13:31.52 | CIA-88 | BRL-CAD: 03brlcad * r40423 10/brlcad/trunk/src/librt/primitives/bot/bot.c: |
| 13:31.52 | CIA-88 | BRL-CAD: instead of doing a cheap ass compression manually ourselves, just call |
| 13:31.52 | CIA-88 | BRL-CAD: rt_bot_condense() which does the same thing (but butter) and will even go a step |
| 13:31.52 | CIA-88 | BRL-CAD: further to reclaim memory. add some sanity checking to make sure our bot |
| 13:31.52 | CIA-88 | BRL-CAD: doesn't already have vertices with infinity values, and a final pass to make |
| 13:31.53 | CIA-88 | BRL-CAD: sure our book-keeping is correct with no deleted vertices remaining after the |
| 13:31.53 | CIA-88 | BRL-CAD: condense. |
| 13:37.34 | CIA-88 | BRL-CAD: 03brlcad * r40424 10/brlcad/trunk/src/librt/primitives/poly/poly.c: should be no harm in calling rt_bot_face_fuse() instead of reallocating the face array blindly. this may even help if there are duplicate faces in the original pg data. |
| 13:38.01 | CIA-88 | BRL-CAD: 03brlcad * r40425 10/brlcad/trunk/src/librt/primitives/bot/bot.c: document the detail that the bot data is condensed. |
| 13:41.17 | CIA-88 | BRL-CAD: 03brlcad * r40426 10/brlcad/trunk/src/ (4 files in 2 dirs): no longer need to call rt_bot_condense() after rt_bot_vertex_fuse() since the result is now guaranteed to be condensed (given you want it that way anyways). |
| 13:50.44 | CIA-88 | BRL-CAD: 03starseeker * r40427 10/brlcad/branches/cmake/src/other/tkhtml/Makefile.am: grab fix for pkgIndex.tcl from trunk |
| 13:57.30 | CIA-88 | BRL-CAD: 03starseeker * r40428 10/brlcad/branches/cmake/misc/CMake/FindSCL.cmake: Whoops, make the FindSCL file slightly closer to sane |
| 14:38.03 | CIA-88 | BRL-CAD: 03erikgreenwald * r40429 10/brlcad/trunk/src/librt/primitives/bot/bot.c: change infinity (a c++ symbol) to INFINITY (a number) for subtraction... |
| 14:52.04 | CIA-88 | BRL-CAD: 03starseeker * r40430 10/brlcad/branches/cmake/ (4 files in 2 dirs): Getting closer to full-featured src/other building, but the FIND_PATH/CMAKE_INSTALL_PREFIX problem from FindTCL.cmake is proving general. Need some sort of solution to that before we're really ready. |
| 14:57.45 | brlcad | oops, not a c++ symbol, but it was a vect_t so no go for - |
| 14:59.19 | CIA-88 | BRL-CAD: 03brlcad * r40431 10/brlcad/trunk/src/librt/primitives/bot/bot.c: should be the [X] element of infinity |
| 15:14.46 | ``Erik | on both my mac and fbsd boxen, "infinity" is is only defined in c++ <limits>, as a template method for "fundamental numerics" or something |
| 15:14.50 | ``Erik | *shrug* |
| 15:17.01 | brlcad | it's a var in that function |
| 15:17.10 | brlcad | overthinking it :) |
| 15:24.10 | CIA-88 | BRL-CAD: 03brlcad * r40432 10/brlcad/trunk/src/librt/primitives/bot/bot.c: avoid shadowing the c++ function, use 'deleted' instead of 'infinity' |
| 16:25.50 | CIA-88 | BRL-CAD: 03starseeker * r40433 10/brlcad/branches/cmake/ (4 files in 2 dirs): |
| 16:25.50 | CIA-88 | BRL-CAD: Sometimes it really is simple - CMAKE_INSTALL_PREFIX is now set to empty string |
| 16:25.50 | CIA-88 | BRL-CAD: at the beginning of the CMake process every time, so the Find results all come |
| 16:25.50 | CIA-88 | BRL-CAD: out as if it were never set in the first place - and at the end the same |
| 16:25.50 | CIA-88 | BRL-CAD: mechanisms that originally set it also restore it. |
| 16:46.18 | CIA-88 | BRL-CAD: 03starseeker * r40434 10/brlcad/branches/cmake/misc/CMake/FindTERMLIB.cmake: kill the termlib debug message |
| 18:02.46 | *** join/#brlcad IriX64 (~IriX64@bas2-sudbury98-1177871390.dsl.bell.ca) |
| 18:36.05 | ``Erik | ponders a v6 roadmap wiki page O.o |
| 18:37.50 | starseeker | I think there are some notes in the tree somewhere... |
| 18:48.49 | ``Erik | tom emailed the list asking around |
| 19:47.40 | CIA-88 | BRL-CAD: 03erikgreenwald * r40435 10/brlcad/branches/bottie/src/librt/primitives/bot/ (btg.c btg.h btgf.c): update prototypes |
| 19:48.23 | CIA-88 | BRL-CAD: 03erikgreenwald * r40436 10/brlcad/branches/bottie/src/librt/primitives/bot/bot.c: wire up vertex data and call bottie push |
| 19:48.41 | CIA-88 | BRL-CAD: 03bob1961 * r40437 10/brlcad/trunk/src/tclscripts/archer/CombEditFrame.tcl: Added methods for appendRow, insertRow, deleteRow, setOperator and setKeypointVC. This functionality is accessible via right-click menu. |
| 19:53.14 | CIA-88 | BRL-CAD: 03erikgreenwald * r40438 10/brlcad/branches/bottie/src/librt/primitives/bot/bot.c: return value of prep. Do not call prep in import5. |
| 19:59.03 | *** join/#brlcad R0b0t1 (~Enigma@64.126.35.185) |
| 19:59.04 | *** join/#brlcad R0b0t1 (~Enigma@unaffiliated/r0b0t1) |
| 20:03.27 | brlcad | ``Erik: you should start one |
| 20:04.30 | brlcad | from that we can kick off simple project plans for features to go into rel8 and rel9 |
| 20:06.22 | CIA-88 | BRL-CAD: 03r_weiss * r40439 10/brlcad/trunk/src/librt/primitives/pnts/pnts.c: |
| 20:06.22 | CIA-88 | BRL-CAD: Within function rt_pnts_ifree for the point cloud primitive, when freeing the |
| 20:06.22 | CIA-88 | BRL-CAD: point cloud bu_list, the forward pointer was being referenced after it was |
| 20:06.22 | CIA-88 | BRL-CAD: freed. The changes follow the conventions for freeing a bu_list indicated within |
| 20:06.22 | CIA-88 | BRL-CAD: 'bu.h' and the function bu_list_free. |
| 20:07.46 | brlcad | richard really is so well suited to bug fixes and valgrinding |
| 20:21.13 | ``Erik | probably cookbook writing, too... he has a note stack of step by step instructions for doing things that's... frightening |
| 20:23.56 | CIA-88 | BRL-CAD: 03brlcad * r40440 10/brlcad/trunk/BUGS: dwayne reports that the rt* commands fail in mged on windows if you change directory |
| 20:24.38 | ``Erik | just "fail", no more? winderz has funny notions on how to find dll's, wonder if that's involved |
| 20:26.05 | _psilva | wait till u have to deal with the side-by-side nonsense |
| 20:26.08 | _psilva | *shudder* |
| 20:26.17 | ``Erik | "side by side"? |
| 20:27.34 | _psilva | http://en.wikipedia.org/wiki/Side-by-side_assembly |
| 20:28.56 | ``Erik | neat, so microsofts solution to 'dll hell' was to add a whole new dimension of hell to their existing hell |
| 20:31.47 | CIA-88 | BRL-CAD: 03starseeker * r40441 10/brlcad/branches/cmake/ (CMakeLists.txt misc/CMake/ThirdParty.cmake): Getting close to working 'all on' and 'all off' toggles - can't yet flip from one to the other with complete success, so some cached variables need to be unset somewhere, but much closer |
| 20:31.50 | brlcad | ``Erik: I bet it's just not finding the binaries after the cd |
| 20:32.40 | brlcad | bob probably sets BRLCAD_ROOT or he made mged do a relative lookup somewhere in a _WIN32 section or something similar |
| 20:42.33 | CIA-88 | BRL-CAD: 03starseeker * r40442 10/brlcad/branches/cmake/CMakeLists.txt: remove a couple old comments |
| 21:04.28 | CIA-88 | BRL-CAD: 03erikgreenwald * r40443 10/brlcad/branches/bottie/src/librt/primitives/bot/btg.c: start wiring together the hit shtuff |
| 21:34.04 | *** join/#brlcad SWPadnos (~Me@dsl107.esjtvtli.sover.net) |
| 21:34.20 | *** join/#brlcad SWPadnos (~Me@emc/developer/SWPadnos) |
| 22:40.40 | *** join/#brlcad mafm (~mafm@83.50.133.211) |
| 22:51.52 | ``Erik | cracks open his last http://www.dogfish.com/brews-spirits/the-brews/year-round-brews/midas-touch.htm O.o |
| 22:54.18 | *** join/#brlcad SWPadnos_ (~Me@dsl107.esjtvtli.sover.net) |
| 23:13.44 | *** join/#brlcad mafm (~mafm@83.50.133.211) |
| 23:17.29 | *** join/#brlcad SWPadnos (~Me@emc/developer/SWPadnos) |
| 23:51.46 | ``Erik | O.o http://www.youtube.com/watch?v=7ZWaWrvJ7nA |