| 00:01.34 | CIA-34 | BRL-CAD: 03starseeker * r37462 10/brlcad/branches/dmtogl/src/other/tkhtml3/src/Makefile.am: Whoops, wrong Makefile.am tweaks. Try again with tkhtml3. |
| 00:28.32 | Stattrav | what is the problem with installation in ubuntu ? i did face some but the sole reason was the absence of some dev headers |
| 00:28.47 | Stattrav | i dont remember what it was. it was 2 years ago |
| 00:30.41 | Stattrav | *what they were actually |
| 00:52.44 | *** join/#brlcad Ralith (n=ralith@69.90.48.97) |
| 01:41.41 | *** join/#brlcad IriX64 (n=Warlock@bas2-sudbury98-1177871770.dsl.bell.ca) |
| 02:36.40 | *** join/#brlcad Nohla (n=jesica@168.226.178.2) |
| 02:46.41 | ``Erik | mwahahhaa |
| 02:48.58 | Nohla | ``Erik evil laught? |
| 02:49.27 | louipc | Stattrav: if you compile from source, it should all be there |
| 02:50.17 | louipc | oh maybe opengl |
| 02:52.55 | ``Erik | yes, maloeran is in town, I took him to the local microbrewery and made him drink the 'sampler' of different beers... he was feeling the effects quite a bit when I dropped him off at his hotel :) |
| 02:53.01 | ``Erik | corrupting the youth and all, mwahahah |
| 02:53.29 | louipc | sounds fun |
| 02:53.49 | ``Erik | (he almost never drinks) |
| 02:53.55 | louipc | how big is the sampler? |
| 02:54.05 | ``Erik | um, 8 4oz glasses I think? |
| 02:54.11 | louipc | hehe |
| 02:54.24 | ``Erik | but he only drank a few, the darker beers were too robust for him |
| 02:55.34 | louipc | any stouts? |
| 02:56.40 | ``Erik | there was an imperial stout in it, I stolded it from him |
| 02:57.42 | louipc | awe |
| 02:57.44 | ``Erik | come to baltimore, louipc, I'll take ya there :D http://www.duclaw.com/ |
| 02:58.08 | ``Erik | he was more into the blond ale and amber ale... and kinda the lager... the dark ones skeered him |
| 02:58.34 | ``Erik | filled two growlers while there, will be a fun weekend O.O |
| 02:58.50 | louipc | that would be sweet. I'll definitely consider it |
| 02:59.33 | louipc | haha |
| 03:00.56 | louipc | i'm debating whether I should go to maryland deathfest or not |
| 03:01.21 | ``Erik | if it's it sonar, it can't be THAT big |
| 03:01.33 | louipc | I know a bunch of people that are going, and it's a great lineup |
| 03:01.46 | louipc | yeap sonar |
| 03:02.25 | louipc | it's biggest death metal fest in north america as far as I know |
| 03:02.38 | ``Erik | I think that's where I saw, uh, raveonettes |
| 03:04.53 | ``Erik | iirc, I took 1 pretty much all the way down into the area, and the local roads to the lot... was too skeered and took 83 up to 695 to get out |
| 03:05.13 | louipc | heheh |
| 03:05.44 | ``Erik | I must be old and uncool, I only recognize a couple bands on the roster |
| 03:06.49 | louipc | I only know maybe 1/4 of them |
| 03:07.23 | louipc | but it's definitely a niche genre |
| 03:08.30 | ``Erik | I'd rather have stuff a little more laid back with some groove... y'know, clutch, CoC, etc |
| 03:08.41 | ``Erik | AiC!!! :) |
| 03:09.31 | louipc | hehe yeah |
| 03:09.56 | ``Erik | plays harder stuff than he listens to usually :/ |
| 03:11.13 | louipc | It's nice to mix it up I think |
| 04:06.36 | Stattrav | ``Erik: true clutch is awesome |
| 04:08.02 | Stattrav | but for me there is nothing like the blues or southern rock/blues rock |
| 04:11.51 | *** join/#brlcad akafubu (n=akafubu@unaffiliated/akafubu) |
| 06:01.07 | *** join/#brlcad IriX64 (n=Warlock@bas2-sudbury98-1177871770.dsl.bell.ca) |
| 12:56.23 | CIA-34 | BRL-CAD: 03brlcad * r37463 10/brlcad/trunk/src/librt/primitives/eto/eto.c: horay for multitasking productivity during seminars. rename rt_mk_ell() and rt_ell4() to static make_ellipse() and make_ellipse4() routines. |
| 12:57.12 | CIA-34 | BRL-CAD: 03brlcad * r37464 10/brlcad/trunk/src/librt/comb.c: ws cleanup |
| 13:01.05 | CIA-34 | BRL-CAD: 03brlcad * r37465 10/brlcad/trunk/src/librt/ (Makefile.am primitives/generic.c primitives/table.c tcl.c): refactor the 'generic' parsetab routines for form(), adjust(), make(), and get() renaming some from rt_parsetab prefix to all using rt_generic prefix and living in their own file. remove unnecessary declarations. |
| 13:22.38 | CIA-34 | BRL-CAD: 03brlcad * r37466 10/brlcad/trunk/src/libbu/malloc.c: still need to figure out why windows reportedly crached on the pointer sanity zappo. expand comment. |
| 13:24.14 | CIA-34 | BRL-CAD: 03brlcad * r37467 10/brlcad/trunk/ (4 files in 3 dirs): |
| 13:24.14 | CIA-34 | BRL-CAD: remove the unimplemented and barely even stubbed binmime 'binary mime-type' |
| 13:24.14 | CIA-34 | BRL-CAD: objects. the name sucks as they wouldn't necessarily even be binary, but |
| 13:24.14 | CIA-34 | BRL-CAD: there's probably a better way to do mime-type style information regardless |
| 13:24.16 | CIA-34 | BRL-CAD: (e.g., an attribute on 'u c' binunifs). |
| 14:02.22 | CIA-34 | BRL-CAD: 03brlcad * r37468 10/brlcad/trunk/include/ (16 files): convert a slew of XXX comments to be FIXME, NOTE, and WTF labels. |
| 14:02.32 | CIA-34 | BRL-CAD: 03brlcad * r37469 10/brlcad/trunk/src/conv/ (38 files in 13 dirs): change a slew of XXX notes to FIXME, NOTE, and WTF, depending on the message. increase default tolerance to 0.0005 though needs improvement. |
| 14:03.21 | *** join/#brlcad d_rossberg (n=rossberg@BZ.BZFLAG.BZ) |
| 14:04.00 | CIA-34 | BRL-CAD: 03brlcad * r37470 10/brlcad/trunk/src/ (7 files in 4 dirs): more XXX conversion to FIXME, NOTE, and WTF depending on the message. |
| 14:22.41 | CIA-34 | BRL-CAD: 03starseeker * r37471 10/brlcad/branches/dmtogl/src/other/tkhtml3/src/Makefile.am: Need some tk stuff in the tkhtml3 build Makefile.am - not sure this is everything but it seems to build on gentoo. |
| 14:23.38 | starseeker | heads in |
| 15:58.07 | CIA-34 | BRL-CAD: 03bob1961 * r37472 10/brlcad/trunk/src/libged/move_all.c: Added a -f option to mvall for reading a mapping file. |
| 16:06.11 | CIA-34 | BRL-CAD: 03bob1961 * r37473 10/brlcad/trunk/src/libged/bot_dump.c: Added ged_dbot_dump() for dumping the displayed bots and auxiliary data (i.e. arrows, lines and axes) to obj format. |
| 16:23.19 | CIA-34 | BRL-CAD: 03bob1961 * r37474 10/brlcad/trunk/src/mged/utility1.c: Moved a few variable declarations to the beginning the their respective blocks. |
| 16:40.52 | CIA-34 | BRL-CAD: 03bob1961 * r37475 10/brlcad/trunk/src/rt/ (view.c worker.c): Temporarily disallow lightmodel 8 on windows until there is time to find a windows equivalent function to getrusage(). |
| 16:44.49 | CIA-34 | BRL-CAD: 03starseeker * r37476 10/brlcad/branches/dmtogl/src/other/tcl/generic/regex.h: Pull in regex.h changes from trunk. |
| 16:47.00 | CIA-34 | BRL-CAD: 03starseeker * r37477 10/brlcad/branches/dmtogl/src/other/tcl/generic/ (tcl.h tclBasic.c tclDecls.h tclInt.h tclStubInit.c tclZlib.c): The new Tcl zlib stuff isn't playing well with BRL-CAD libz - need a way to sort this out. For now, nuke it, but this isn't the correct long term approach. |
| 16:47.44 | CIA-34 | BRL-CAD: 03starseeker * r37478 10/brlcad/branches/dmtogl/src/other/tcl/unix/ (Makefile.in configure.in): Oh yeah - get the build stuff for Tcl zlib |
| 16:49.12 | CIA-34 | BRL-CAD: 03bob1961 * r37479 10/brlcad/trunk/misc/win32-msvc8/opennurbs/opennurbs.vcproj: Added move source files to the build. |
| 16:49.22 | CIA-34 | BRL-CAD: 03starseeker * r37480 10/brlcad/branches/dmtogl/src/other/incrTcl/ (11 files in 11 dirs): Clear out the incrTcl Makefile.in files replaced by Makefile.am - eventually will need to do a more careful review of all this but for now byebye. |
| 16:51.50 | CIA-34 | BRL-CAD: 03bob1961 * r37481 10/brlcad/trunk/misc/win32-msvc8/libanalyze/ (. libanalyze.vcproj): Added libanalyze.vcproj. |
| 17:10.35 | CIA-34 | BRL-CAD: 03bob1961 * r37482 10/brlcad/trunk/src/libged/move_all.c: Minor change to the usage string. |
| 17:37.41 | CIA-34 | BRL-CAD: 03starseeker * r37483 10/brlcad/branches/dmtogl/ (147 files in 39 dirs): Sync dmtogl to r37480 |
| 18:00.29 | CIA-34 | BRL-CAD: 03starseeker * r37484 10/brlcad/branches/dmtogl/src/other/tkhtml3/ (Makefile.am TODO): Add TODO file for tkhtml3 |
| 18:14.16 | CIA-34 | BRL-CAD: 03starseeker * r37485 10/brlcad/branches/dmtogl/src/other/tk/generic/tkImgPNG.c: (log message trimmed) |
| 18:14.19 | CIA-34 | BRL-CAD: Hack and slash the PNG support in Tk, which depends on the Zlib stuff removed |
| 18:14.24 | CIA-34 | BRL-CAD: from Tcl earlier. It appears that the Tcl/Tk solution to the problem we |
| 18:14.28 | CIA-34 | BRL-CAD: encountered earlier integrating tkpng was to also integrate zlib into Tcl, which |
| 18:14.34 | CIA-34 | BRL-CAD: means that Tcl itself is now going to conflict with our libz. Earlier compiler |
| 18:14.40 | CIA-34 | BRL-CAD: errors indicate that libtcl isn't going to be a suitable straight up linking |
| 18:14.46 | CIA-34 | BRL-CAD: replacement, so there's a situation here. Hopefully it can function enough for |
| 18:30.33 | *** join/#brlcad Ralith (n=ralith@d142-058-083-041.wireless.sfu.ca) |
| 18:36.06 | CIA-34 | BRL-CAD: 03starseeker * r37486 10/brlcad/branches/dmtogl/src/bwish/main.c: Still need itcl.h when doing BWISH with the new versions, apparently... |
| 19:30.52 | starseeker | uh oh |
| 19:31.12 | starseeker | the new Tk uses tkImgPNG behind tkImgPhoto, apparently |
| 19:31.29 | starseeker | so that'll have to be untangled before even any framebuffer tests can be done |
| 19:31.32 | starseeker | mutter... |
| 19:35.01 | brlcad | heh, so they're using what we were using? |
| 19:36.14 | starseeker | well, what I tried to use with that tkpng thing |
| 19:36.30 | starseeker | I didn't expect it to be in back of tkImgPhoto - I thought that would be lower level |
| 19:37.00 | starseeker | but they hit the same problem, solved it by sucking in zlib, and complicated our lives |
| 19:37.31 | starseeker | plus I can't start MGED - it's not finding tclStubsPtr in libitcl |
| 19:37.36 | starseeker | growl... |
| 19:38.31 | starseeker | was hoping to just use rt and check the refresh behavior on the Tk window, but no soap |
| 19:39.34 | starseeker | wonders why the blippity blip they seem to have duplicated everything in the win subdirectory... almost wonder if I checked it out wrong somehow |
| 19:41.50 | brlcad | sounds like you might be getting lost down a complexity pipeline with too much duct tape, needing to resolve one issue at a time to completion instead of bubblegumming to the next one :) |
| 19:42.01 | starseeker | yeah |
| 19:42.56 | starseeker | I wanted to just zero in on the one thing without doing a full "solve tcl/tk 8.6 integration" process, but now that that's out I'll have to go back and do it right |
| 19:43.34 | starseeker | figures that the one thing that conflicts with our stuff would be the one thing I need to test |
| 19:45.37 | CIA-34 | BRL-CAD: 03starseeker * r37487 10/brlcad/branches/dmtogl/src/other/tcl/generic/tcl.h: We're using the result slot, apparently one of the tcl TIP recommendations discourges it... need to dig into this one too. |
| 19:45.42 | brlcad | of course you could just install tcl/tk 8.6 and tell it to use system tcl/tk |
| 19:46.31 | starseeker | I could, but I would still expect a conflict between the tcl and libz/zlib libraries unless there's some magic foo somewhere I'm missing |
| 19:47.45 | starseeker | still, might be worth a shot |
| 19:49.03 | starseeker | readily admits the 8.5 Makefile.am foo might not be mapping well to 8.6 |
| 19:51.57 | ``Erik | *snicker* http://gist.github.com/289467 |
| 19:56.25 | brlcad | heh |
| 19:56.48 | brlcad | learned something new.. don't think I knew (or at least I forgot if I did) that python has lambda functions |
| 20:06.14 | ``Erik | amusing, oreilly had a booth at pycon2009 and supposedly the first book they sold out of was 'real world haskell' |
| 20:06.50 | starseeker | the impossible intrigues people ;-) |
| 20:07.46 | ``Erik | heh, I had fun doing haskell back in school |
| 20:08.03 | ``Erik | but sometimes I'd have to switch to scheme to get the program to complete in time... |
| 21:06.32 | CIA-34 | BRL-CAD: 03bob1961 * r37488 10/brlcad/trunk/doc/docbook/system/man1/en/mvall.xml: Updated to include a -f option and a sample mapping file. |
| 21:07.06 | CIA-34 | BRL-CAD: 03brlcad * r37489 10/brlcad/trunk/regress/repository.sh: |
| 21:07.06 | CIA-34 | BRL-CAD: only look for source files in the src and include directories (so we avoid |
| 21:07.06 | CIA-34 | BRL-CAD: walking down distcheck dirs and potentially other unknown locations), but even |
| 21:07.06 | CIA-34 | BRL-CAD: more so, make sure it's a BRL-CAD file before we boldly claim it has a common.h |
| 21:07.07 | CIA-34 | BRL-CAD: problem. look at the file header to make sure, which helps it skip the lexer |
| 21:07.09 | CIA-34 | BRL-CAD: generated source files too (which will otherwise fail the common.h test as the |
| 21:07.11 | CIA-34 | BRL-CAD: lexer adds it's own stuff to the top of the generated file). |
| 21:15.43 | CIA-34 | BRL-CAD: 03brlcad * r37490 10/brlcad/trunk/NEWS: |
| 21:15.45 | CIA-34 | BRL-CAD: bob implemented a -f option on the mvall command for renaming objects in a .g |
| 21:15.47 | CIA-34 | BRL-CAD: file based on an input mapping file. this feature relates to sf feature request |
| 21:15.49 | CIA-34 | BRL-CAD: #2827957 (Dynamic renaming of objects based on mapping tables) from butler (and |
| 21:15.51 | CIA-34 | BRL-CAD: was a reiterated request by various target describers). |
| 21:16.30 | CIA-34 | BRL-CAD: 03bob1961 * r37491 10/brlcad/trunk/doc/docbook/system/man1/en/mvall.xml: Minor tweak to the "SEE ALSO" section. |
| 21:47.55 | *** join/#brlcad poolio (n=poolio@BZ.BZFLAG.BZ) |
| 21:52.57 | *** join/#brlcad Stattrav (n=Stattrav@202.3.77.161) |
| 22:05.41 | CIA-34 | BRL-CAD: 03brlcad * r37492 10/brlcad/trunk/TODO: |
| 22:05.43 | CIA-34 | BRL-CAD: mapping file support was added to the mvall commands, so remove the todo option. |
| 22:05.45 | CIA-34 | BRL-CAD: the idea to also add it to the 'mv' command is interesting, but not nearly as |
| 22:05.47 | CIA-34 | BRL-CAD: pressing a need to keep the entry around for. instead of adding similar -f |
| 22:05.49 | CIA-34 | BRL-CAD: options to other commands, a generic batch file command would be better as it'd |
| 22:05.51 | CIA-34 | BRL-CAD: parallel the search command. it'd also be generalizable to arbitrary automatic |
| 22:05.53 | CIA-34 | BRL-CAD: file-based processing. |
| 22:31.54 | CIA-34 | BRL-CAD: 03erikgreenwald * r37493 10/brlcad/trunk/src/librt/primitives/nmg/nmg_tri_mc.c: pack faces/vertices into the shell |
| 22:33.05 | CIA-34 | BRL-CAD: 03erikgreenwald * r37494 10/brlcad/trunk/src/librt/primitives/metaball/metaball_tri.c: add some minor notes. Change return value to 0. |
| 22:36.31 | *** join/#brlcad Ralith (n=ralith@69.90.48.97) |
| 22:37.12 | CIA-34 | BRL-CAD: 03bob1961 * r37495 10/brlcad/trunk/src/libged/move_all.c: Modified ged_move_all_file() to handle comments. It's expected that bu_argv_from_string() will handle arguments with spaces (i.e. "example arg with spaces"). |
| 22:37.19 | *** join/#brlcad R0b0t1 (n=Enigma@unaffiliated/r0b0t1) |
| 22:46.29 | ``Erik | hah http://brlcad.org/~erik/mc.png |
| 22:46.39 | ``Erik | mebbe I should figure the orientation some :D |
| 22:48.18 | CIA-34 | BRL-CAD: 03bob1961 * r37496 10/brlcad/trunk/doc/docbook/system/man1/en/mvall.xml: Updated to reflect that comments are now allowed in the mapping file. |
| 22:51.34 | CIA-34 | BRL-CAD: 03bob1961 * r37497 10/brlcad/trunk/src/tclscripts/archer/ArcherCore.tcl: Fixed two misuses/typos of lsearch in the cmd method. |
| 22:52.23 | CIA-34 | BRL-CAD: 03bob1961 * r37498 10/brlcad/trunk/src/tclscripts/archer/AttrGroupsDisplayUtility.tcl: Added exportToObj method. |
| 22:56.39 | CIA-34 | BRL-CAD: 03bob1961 * r37499 10/brlcad/trunk/src/tclscripts/archer/Archer.tcl: Updated the moveWrapper to bypass the ledger stuff if -f is specified. |
| 22:57.35 | CIA-34 | BRL-CAD: 03bob1961 * r37500 10/brlcad/trunk/src/tclscripts/lib/Ged.tcl: Added a method for dbot_dump. |
| 22:59.01 | brlcad | bot_sync, bot_flip |
| 22:59.26 | brlcad | "form bot" will show the parameters for a bot |
| 23:00.10 | brlcad | get your_bot orient |
| 23:00.18 | brlcad | put your_bot orient no |
| 23:01.05 | CIA-34 | BRL-CAD: 03bob1961 * r37501 10/brlcad/trunk/include/config_win.h: Added define for STDIN_FILENO. |
| 23:01.31 | CIA-34 | BRL-CAD: 03erikgreenwald * r37502 10/brlcad/trunk/src/librt/primitives/nmg/nmg_tri_mc.c: cope with degredate triangles. calculate face information. |
| 23:02.10 | CIA-34 | BRL-CAD: 03erikgreenwald * r37504 10/brlcad/trunk/src/librt/primitives/metaball/metaball_tri.c: move region generation into timed segment. attempt to fix normals. |
| 23:02.12 | CIA-34 | BRL-CAD: 03bob1961 * r37503 10/brlcad/trunk/include/dm.h: Added more defines for FONT10 and FONT11. |
| 23:03.20 | CIA-34 | BRL-CAD: 03bob1961 * r37505 10/brlcad/trunk/include/ged.h: Added a declaration for dbot_dump. |
| 23:04.57 | CIA-34 | BRL-CAD: 03bob1961 * r37506 10/brlcad/trunk/src/libdm/ (dm-ogl.c dm-wgl.c): Added more increments for automatic font size changes. |
| 23:06.31 | CIA-34 | BRL-CAD: 03bob1961 * r37507 10/brlcad/trunk/src/libtclcad/ged_obj.c: Added the dbot_dump command. |
| 23:08.42 | CIA-34 | BRL-CAD: 03bob1961 * r37508 10/brlcad/trunk/misc/win32-msvc8/libged/libged.vcproj: Added libanalyze.lib |
| 23:09.21 | CIA-34 | BRL-CAD: 03bob1961 * r37509 10/brlcad/trunk/misc/win32-msvc8/brlcad/brlcad.sln: Added libanalyze |
| 23:41.29 | CIA-34 | BRL-CAD: 03brlcad * r37510 10/brlcad/trunk/TODO: |
| 23:41.33 | CIA-34 | BRL-CAD: flesh out even more details on a batch command. show how it relates to search |
| 23:41.37 | CIA-34 | BRL-CAD: and show how it could have really powerful stream processing capabilities of |
| 23:41.41 | CIA-34 | BRL-CAD: awk, sed, and cut. becomes a way to pipe and invoke ged commands without a |
| 23:41.45 | CIA-34 | BRL-CAD: shell. |
| 23:45.19 | CIA-34 | BRL-CAD: 03brlcad * r37511 10/brlcad/trunk/TODO: |
| 23:45.19 | CIA-34 | BRL-CAD: keep a note to one day have a g-gcode exporter, with details on how to do so in |
| 23:45.20 | CIA-34 | BRL-CAD: the manner that best preserves shapes without relying on point sampling or |
| 23:45.20 | CIA-34 | BRL-CAD: tessellation. relates to sf request 1191316 and numerous requests from others |
| 23:45.20 | CIA-34 | BRL-CAD: around the web (that presently go the g-stl or similar route). |
| 23:54.16 | CIA-34 | BRL-CAD: 03brlcad * r37512 10/brlcad/trunk/TODO: |
| 23:54.16 | CIA-34 | BRL-CAD: richard implemented the 3-argument scaling factors for sca, so can remove the |
| 23:54.16 | CIA-34 | BRL-CAD: todo item. also just noticed that this feature was recorded as sf tracker |
| 23:54.16 | CIA-34 | BRL-CAD: #1206440 (suggestion for 'sca' command) from Karel Kulhavy ( clock3 ) - |
| 23:54.20 | CIA-34 | BRL-CAD: 2005-05-22; so also closed request that out and let them know it's in 7.16.4. |
