| 01:00.08 | *** join/#brlcad Nohla (n=jesica@201.255.230.172) |
| 01:08.04 | ``Erik | pixar intro parody http://www.collegehumor.com/video:1921845 |
| 01:13.31 | CIA-41 | BRL-CAD: 03starseeker * r36855 10/brlcad/trunk/ (5 files in 5 dirs): |
| 01:13.31 | CIA-41 | BRL-CAD: Take a few baby steps towards dm-tk + aquatk. Try to turn on ITK when aquatk is |
| 01:13.31 | CIA-41 | BRL-CAD: on, itcl is being built and x11 is off, avoid a few X11/Xutil.h includes in the |
| 01:13.31 | CIA-41 | BRL-CAD: DM_TK sections, disable the tk framebuffer stuff until the tk display manager |
| 01:13.31 | CIA-41 | BRL-CAD: gets sorted out. Trying this with aquatk as it is a good way to ensure no X11 |
| 01:13.34 | CIA-41 | BRL-CAD: requirements in the tk display manager - hopefully this doesn't break |
| 01:13.36 | CIA-41 | BRL-CAD: anything... |
| 01:14.20 | starseeker | crosses fingers that ``Erik won't have more ammo to raz him about tomorrow... |
| 01:15.43 | ``Erik | if I run out, I"ll just start making stuff up :D |
| 01:16.17 | starseeker | mged won't come up with that setup (tk_open_dm fails) but amusingly enough archer does (but can't open a model without ogl, of course) |
| 01:16.24 | starseeker | heh |
| 01:17.20 | starseeker | much more annoyingly, we don't seem to have the ttk aqua them available |
| 01:18.59 | starseeker | wonder if we need to pass a build flag in or something |
| 01:26.23 | starseeker | humph - not even close - close X11 and nothing happens |
| 01:26.31 | starseeker | doggone it |
| 01:32.32 | starseeker | are we even building tk aqua in the first place? |
| 01:34.30 | starseeker | uh oh |
| 01:34.56 | starseeker | grep, why didn't you see a tk/unix configure line with aqua... |
| 01:38.03 | starseeker | woot |
| 01:38.27 | *** join/#brlcad R0b0t1 (n=Enigma@unaffiliated/r0b0t1) |
| 01:38.48 | starseeker | dunno why aqua wasn't getting triggered in the tk build - have to look into that - but manually doing it works |
| 01:39.04 | starseeker | menus aren't working for some reason... |
| 01:45.34 | starseeker | http://bzflag.bz/~starseeker/mged_aquatk_1st.png (OK, it's not really the first - brlcad has done this before - but first for me) |
| 01:45.57 | starseeker | for some reason archer is glued to the upper left corner |
| 01:46.01 | starseeker | http://bzflag.bz/~starseeker/archer_aquatk_1st.png |
| 01:47.15 | starseeker | oh, there we go |
| 01:49.06 | starseeker | apparently the clam theme doesn't play well with aquatk |
| 01:49.18 | starseeker | http://bzflag.bz/~starseeker/archer_aquatk_aquatheme.png |
| 01:51.14 | starseeker | no, now it's doing it again |
| 01:51.15 | starseeker | weird |
| 01:51.18 | starseeker | oh well, details |
| 01:52.53 | starseeker | heads home |
| 01:56.53 | *** join/#brlcad Nohla (n=jesica@201.255.247.166) |
| 02:32.33 | brlcad | starseeker: a great way to "explore" a code is to clean it up :) |
| 02:33.01 | brlcad | quell warnings, restructure for no forward decls, remove dead code, cleanup comments ;) |
| 02:35.50 | brlcad | starseeker: hah, that's pretty awesome that you even got that far... been a LONG while since I've seen MGED in that mode :) |
| 02:36.12 | brlcad | looks like aquatk is coming along a lot better than it was at first! |
| 02:37.14 | brlcad | you got that far just by turning everything back on, eh? |
| 02:45.22 | starseeker | brlcad: more or less |
| 02:48.03 | brlcad | heh, that's surprising, but cool |
| 02:48.31 | starseeker | you can see what I did in commit 36855 - that's it except for manually doing an --enable-aquatk in tk/unix |
| 02:48.34 | brlcad | exciting actually, that we could be sans x11 on mac os x ... :) |
| 02:48.47 | brlcad | really would bump the priority of getting a brl-cad terminal going |
| 02:48.53 | starseeker | grins evilly |
| 02:49.03 | starseeker | would LOVE to ditch X11 |
| 02:49.08 | brlcad | yeah, I was reading the patch |
| 02:49.28 | starseeker | ticklish part was the ITK build detection - still not sure I got that totally right |
| 02:49.47 | starseeker | and I haven't messed with the tk framebuffer at all yet, so no raytracing |
| 02:49.50 | brlcad | was libfb horked? |
| 02:49.56 | brlcad | noticed you disabled it |
| 02:51.35 | brlcad | or just keeping it simple |
| 02:51.39 | starseeker | keeping it simple |
| 02:51.55 | starseeker | I might have been able to ditch an X11 header and move forward, but I didn't want to complicate things |
| 02:52.00 | starseeker | figured dm first, then fb |
| 02:52.27 | brlcad | the AM_CONDITIONAL isn't probably what it needs to be |
| 02:52.50 | starseeker | yeah, figured |
| 02:52.53 | brlcad | build_brlcad_itcl is the switch, the other tests should affect that switch |
| 02:53.18 | starseeker | um - apparently if not building X11 or tk itcl is on but itk is off |
| 02:53.24 | starseeker | at least, that's what happened |
| 02:53.53 | brlcad | in the section where that var is tested/set, can test for the other two vars |
| 02:54.01 | brlcad | yeah, I think that was just part of the X11 weeding |
| 02:54.23 | starseeker | oh - so there isn't a scenario with itcl but not itk? |
| 02:54.26 | brlcad | to get it compiling on a system that didn't have X11 |
| 02:54.29 | starseeker | that would vastily simplify things |
| 02:54.49 | starseeker | um - itk works with aquatk (apparently) |
| 02:54.56 | starseeker | otherwise archer wouldn't aquify |
| 02:55.24 | brlcad | yeah, that's where aquatk changes the logic |
| 02:55.42 | starseeker | what really bothers me is why the aquatk tk build wasn't triggered by --enable-aquatk |
| 02:55.53 | starseeker | might have had a stale compile or something I suppose... |
| 02:57.29 | brlcad | logic should be something like "if x11 or aquatk, traverse into tk/itk" |
| 02:58.44 | starseeker | I think it's at 3910 in configure.ac |
| 02:59.08 | brlcad | you have a system Tk it was using? |
| 02:59.10 | starseeker | looks OK, but I didn't see any subconfigure of tk |
| 02:59.13 | brlcad | enable-all and it should have enabled |
| 02:59.15 | starseeker | not intentionally |
| 02:59.22 | starseeker | I had enable-all |
| 02:59.35 | brlcad | should see --enable-aqua in config.log head |
| 02:59.43 | brlcad | (for tk's config.log) |
| 02:59.54 | brlcad | that's the toggle |
| 03:00.02 | brlcad | it obviously worked :) |
| 03:00.23 | starseeker | no, only when I manually did a cd into tk/unix and configured it myself |
| 03:02.57 | starseeker | brlcad: if you're on a mac at home you can give it a whirl :-) |
| 03:03.53 | starseeker | DID see --enable-aqua appear in the configure lines for misc/enigma and the other subconfigures, but I didn't see any triggering of a tk subconfigure at all |
| 03:07.25 | starseeker | I think I did ./configure --enable-all --enable-aquatk --disable-X11 or some such |
| 03:21.54 | CIA-41 | BRL-CAD: 03brlcad * r36856 10/brlcad/trunk/src/libgcv/region_end.c: |
| 03:21.54 | CIA-41 | BRL-CAD: flatten and simplify the logic a little bit. make vars accessed post jump |
| 03:21.54 | CIA-41 | BRL-CAD: 'static' in order to quell compilation warnings about setjmp/longjmp possibly |
| 03:21.54 | CIA-41 | BRL-CAD: clobbering their register data. as static, they should be safe (but now this |
| 03:21.55 | CIA-41 | BRL-CAD: routine isn't thread safe (not that it likely was to begin with)). |
| 03:21.57 | brlcad | huh, was tk enabled? |
| 03:23.18 | brlcad | wonder what compiler rev was reporting that jmp clobbage |
| 06:05.32 | *** join/#brlcad Computer_ (n=Computer@209-16-114-100.net.bhntampa.com) |
| 06:14.43 | *** join/#brlcad superlinux (n=imad@77.42.133.191) |
| 06:14.48 | superlinux | starseeker, hi |
| 06:15.10 | superlinux | where can i find the itk 3.2 to download it? |
| 08:12.29 | *** join/#brlcad superlinux (n=imad@85.195.142.183.satgate.net) |
| 12:08.02 | *** join/#brlcad __monty__ (n=toon@78-23-208-210.access.telenet.be) |
| 13:12.11 | *** join/#brlcad mafm (n=mafm@249.Red-88-11-185.dynamicIP.rima-tde.net) |
| 13:14.23 | *** join/#brlcad parigaudi (n=quassel@pd95b7f5e.dip0.t-ipconnect.de) |
| 13:32.10 | *** join/#brlcad Computer (n=Computer@unaffiliated/computer) |
| 13:57.59 | ``Erik | brlcad: get it iwth both apple 4.0.1 and fbsd 4.2.1 |
| 14:20.59 | starseeker | cc1: warnings being treated as errors |
| 14:20.59 | starseeker | ../../../brlcad/src/libbu/crashreport.c: In function âbu_crashreportâ: |
| 14:20.59 | starseeker | ../../../brlcad/src/libbu/crashreport.c:75: error: format not a string literal and no format arguments |
| 14:21.02 | starseeker | make[2]: *** [crashreport.lo] Error 1 |
| 14:21.04 | starseeker | that's an fprintf |
| 14:21.11 | starseeker | erm |
| 14:22.24 | starseeker | wouldn't the snprintf to the buffer set up a string literal for the fprintf? |
| 14:23.21 | starseeker | heads in |
| 14:23.55 | ``Erik | neither of my boxen freak out on it |
| 14:24.06 | ``Erik | though changing it to fprintf(fp, "%s", buf); might help? |
| 14:25.49 | *** join/#brlcad dli (n=dli@69.172.97.211) |
| 14:44.00 | ``Erik | "at&t to put 5gb cap on iphone" nice |
| 15:09.13 | CIA-41 | BRL-CAD: 03brlcad * r36857 10/rt^3/trunk/src/tests/GeometryServiceTest.cxx: |
| 15:09.13 | CIA-41 | BRL-CAD: add an initial high-level integration test harness for chatting with the |
| 15:09.13 | CIA-41 | BRL-CAD: geometry service. this stubs out some basic connections, probing and reporting |
| 15:09.13 | CIA-41 | BRL-CAD: on the status of functionality. the client and server classes next need to get |
| 15:09.13 | CIA-41 | BRL-CAD: filled out with an interaction with the actual GS protocol (either low-level or |
| 15:09.16 | CIA-41 | BRL-CAD: via classes) but the intent is a dependency-free test of the protocol. |
| 15:09.33 | *** join/#brlcad brlcad (n=sean@BZ.BZFLAG.BZ) |
| 15:09.43 | brlcad | grr |
| 15:14.01 | ``Erik | dude, peer must have it out for you |
| 15:22.28 | brlcad | hits the road, late |
| 16:14.11 | *** join/#brlcad Elrohir (n=kvirc@p5B149E94.dip.t-dialin.net) |
| 16:23.43 | CIA-41 | BRL-CAD: 03erikgreenwald * r36858 10/brlcad/trunk/src/librt/primitives/ (metaball/metaball.c table.c): rt_metaball_get (for g2asc) |
| 16:24.41 | ``Erik | flees before people yell at him for that |
| 16:42.20 | CIA-41 | BRL-CAD: 03brlcad * r36859 10/brlcad/trunk/src/libbu/linebuf.c: ws |
| 16:44.18 | CIA-41 | BRL-CAD: 03brlcad * r36860 10/brlcad/trunk/src/libbu/crashreport.c: |
| 16:44.18 | CIA-41 | BRL-CAD: quell warning about fprintf without a string literal. that was intentionally |
| 16:44.18 | CIA-41 | BRL-CAD: done to avoid fprintf needing to utilize an expansion buffer (whether on stack |
| 16:44.18 | CIA-41 | BRL-CAD: or heap) in case we're crashing hard. instead, change up the fprintf with an |
| 16:44.18 | CIA-41 | BRL-CAD: fwrite since that's the intent anyways, to just write out some bytes. make the |
| 16:44.19 | CIA-41 | BRL-CAD: file stream unbuffered while we're at it. |
| 16:48.37 | CIA-41 | BRL-CAD: 03brlcad * r36861 10/brlcad/trunk/src/libbu/crashreport.c: convert the other fprintfs to fwrite too except for the handful of static strings, leave them as fprintf. |
| 16:52.49 | brlcad | wonders why anyone would yell at him for adding in g2asc support.. |
| 16:53.08 | brlcad | shoulda had it from the get-go |
| 17:16.09 | *** join/#brlcad starseeker (n=starseek@BZ.BZFLAG.BZ) |
| 17:16.32 | starseeker | hmm |
| 17:16.39 | brlcad | yeah, boo hiss |
| 17:16.51 | starseeker | server hickup? |
| 17:17.05 | brlcad | server katapulted |
| 17:18.07 | starseeker | ow |
| 17:18.55 | starseeker | tries aquatk again from a clean build to see if tk/unix gets the word... |
| 17:20.46 | starseeker | ok, there's the configure line this time :-) |
| 17:20.56 | starseeker | let there be make |
| 17:24.27 | CIA-41 | BRL-CAD: 03brlcad * r36862 10/rt^3/trunk/src/tests/GeometryServiceTest.cxx: make the various sections more distinct with some comment formatting. add another one for testing event notifications. |
| 17:43.10 | CIA-41 | BRL-CAD: 03brlcad * r36863 10/rt^3/trunk/src/tests/GeometryServiceTest.cxx: comment out what the classes are, what they are meant to represent. break out the macros into multiple lines and add a check to make sure the server stays running. |
| 17:45.06 | starseeker | oh, I'm wrong - the menus aren't missing, they're just where apple puts 'em |
| 18:01.26 | CIA-41 | BRL-CAD: 03brlcad * r36864 10/rt^3/trunk/src/tests/GeometryServiceTest.cxx: make sure the server will restart |
| 18:02.22 | brlcad | new screenshot? |
| 18:03.47 | starseeker | oh, sure :-) one sec |
| 18:05.33 | CIA-41 | BRL-CAD: 03starseeker * r36865 10/brlcad/trunk/src/other/Makefile.am: Don't turn off TK building if X11 isn't there anymore. |
| 18:05.35 | starseeker | bet that was my Tk problem |
| 18:06.15 | ``Erik | the busted-assed twisty maze of code for v4 vs v5 is a pain |
| 18:12.34 | CIA-41 | BRL-CAD: 03brlcad * r36866 10/rt^3/trunk/src/tests/GeometryServiceTest.cxx: additional tests for getting .g representations, persisting geometry versions, and server-side raytracing. |
| 18:12.57 | brlcad | something other than havoc would be nice too :) |
| 18:13.22 | starseeker | brlcad: now you tell me :-P |
| 18:13.27 | starseeker | remaking... |
| 18:14.58 | starseeker | erm - well - here's the havoc one, I'll make another one in a second... http://bzflag.bz/~starseeker/mged_aqua_withmenu.png |
| 18:21.57 | starseeker | brlcad: how about this: http://bzflag.bz/~starseeker/mged_aqua_jeep.png |
| 18:33.43 | ``Erik | are you sure we have enough havoc screenshots? |
| 18:39.35 | starseeker | ``Erik: heh |
| 18:39.45 | starseeker | I use that one because the wireframe is a pain in the neck |
| 18:40.30 | CIA-41 | BRL-CAD: 03erikgreenwald * r36867 10/brlcad/trunk/src/adrt/librender/cut.c: use VJOIN1 instead of VCOMB2 |
| 18:46.51 | starseeker | oo - tkhtml3 doesn't like aqua |
| 18:46.56 | starseeker | crud |
| 18:47.09 | ``Erik | *cough* O:-) |
| 18:47.31 | ``Erik | nifty, toyjeep doesn't facetize wel |
| 18:51.43 | ``Erik | niftier, pinewood facetizes the two starboard wheels, but not the two port wheels. |
| 19:19.53 | starseeker | good - aquatk now compile straight. Time to figure out what's busted and why |
| 19:38.57 | starseeker | ok, looks like the tk framebuffer isn't as far along |
| 21:00.40 | CIA-41 | BRL-CAD: 03indianlarry * r36868 10/brlcad/trunk/src/conv/step/ (OpenNurbsInterfaces.cpp PullbackCurve.cpp): Cleaned up check_pullback_seam_bridge() in pullback code, also adjusted bounds of linear extrude, conical and cylindrical surfaces. Added some debugging code related to trimming curves crossing seam bounaries(still WIP). |
| 21:04.05 | CIA-41 | BRL-CAD: 03indianlarry * r36869 10/brlcad/trunk/src/librt/primitives/brep/brep.cpp: Added code to push 2d UV coordinates back into domain for closed surfaces that have wrapped past the seam. |
| 21:07.09 | CIA-41 | BRL-CAD: 03indianlarry * r36870 10/brlcad/trunk/src/librt/opennurbs_ext.cpp: Make sure 'ctree' assigned to NULL when trims are removed ( starts without trims in STEP converter) |
| 21:27.40 | CIA-41 | BRL-CAD: 03starseeker * r36871 10/brlcad/trunk/doc/html/manuals/archer/ (Archer_Documentation.chm Makefile.am): Opened this on a Windows box, no content to speak of in it (same as the tool on Linux tried earlier) - byebye |
| 21:48.55 | *** join/#brlcad Nohla (n=jesica@201.255.247.166) |
| 22:12.55 | *** join/#brlcad talcite (n=matthew@dhcp-143-147.mcme-students.carleton.ca) |
| 22:42.34 | brlcad | nice screenshots starseeker |
| 22:42.47 | brlcad | queues them up |
| 22:48.31 | *** join/#brlcad Elrohir (n=kvirc@p5B149E94.dip.t-dialin.net) |
| 23:34.36 | CIA-41 | BRL-CAD: 03erikgreenwald * r36872 10/brlcad/trunk/src/libwdb/ (Makefile.am metaball.c): beginnings of mk_metaball. Not adding it to wdb.h as I don't think I like the signature. |
| 23:41.04 | yukonbob | indeed, screenshots are look clean and cool. |
| 23:41.20 | yukonbob | s/are look/look/ |
| 23:43.20 | ``Erik | scratches his brain |
| 23:46.13 | CIA-41 | BRL-CAD: 03erikgreenwald * r36873 10/brlcad/trunk/src/libwdb/metaball.c: erm, already was an entry in wdb.h, just no implementation |
| 23:47.24 | ``Erik | what the flying hell |
| 23:49.03 | ``Erik | how the feck did it compile earlier? O.o |
| 23:49.11 | CIA-41 | BRL-CAD: 03erikgreenwald * r36874 10/brlcad/trunk/src/libwdb/ (Makefile.am metaball.c): ... already had it |
| 23:49.16 | starseeker | ``Erik: welcome to my world :) |
| 23:49.46 | ``Erik | heh |
| 23:50.53 | starseeker | brlcad: apparently archer help is "not yet implemented" |
| 23:59.12 | ``Erik | bah |
| 23:59.37 | ``Erik | all that work is sitting in an editor window screwed up because those ... people can't figure out the difference between 5:00 and 3:30 |
