| 00:39.46 | brlcad | andrecastelo: do you have access to cygwin and/or a unix/linux box? |
| 00:40.31 | brlcad | one thing that is always useful to check from time to time, especially when adding new dirs is to do a full distribution check |
| 00:40.47 | brlcad | I usually do something akin to the following when it comes time to release |
| 00:41.30 | andrecastelo | not cygwin, but msys.. and i tried compiling/configuring with that and it didn't work |
| 00:41.32 | brlcad | sh autogen.sh && ./configure --enable-all && make clean && make -j10 && make -j10 distcheck && make benchmark && make test |
| 00:42.02 | brlcad | yeah, msys would need a little more work |
| 00:42.26 | brlcad | I started that a couple years ago, but got bogged down with other tasks (and the payoff benefit at the time was very minimal) |
| 00:42.46 | brlcad | mostly just changing a lot of subtle assumptions |
| 00:43.13 | andrecastelo | i see |
| 00:44.14 | brlcad | okay, then no matter .. access to a linux/unix box would be ideal |
| 00:44.35 | andrecastelo | i did burn a source copy for immediate and temporary solution |
| 00:44.39 | brlcad | maybe can get you an account set up on a server here in a few days |
| 00:44.57 | andrecastelo | for putty? |
| 00:45.08 | brlcad | whatever ssh client you prefer ;) |
| 00:45.16 | brlcad | i have a better one I can give you |
| 00:45.30 | brlcad | putty works though too |
| 00:46.05 | andrecastelo | so i would compile here, if everything works, commit, svn update through the ssh and then compile through it too? |
| 00:46.21 | brlcad | yeah, something like that |
| 00:46.25 | brlcad | not for every change of course |
| 00:46.36 | brlcad | just for anything major that might break build |
| 00:46.49 | brlcad | otherwise, you can always wait for someone to bitch at you for breaking something ;) |
| 00:47.49 | andrecastelo | i was having some problems compiling earlier, and i thought i did break something |
| 00:48.36 | andrecastelo | no one was having the problem.. but turns out it was something specific to msvc :b |
| 00:49.39 | ``Erik | heh, yeah, bob had a local hack to work around it, the vcproj just didn't include it... he fixed it so it compiles, probably came out almost identical to what you posted on the patch tracker |
| 00:50.08 | ``Erik | if you want to add your mlt.c file, knock yourself out, just make sure to update the Makefile.am as well |
| 00:50.36 | ``Erik | as for the presented area patch, iirc you need to change it to use bu lists and to use the vmath routines for vector ops |
| 00:51.00 | andrecastelo | hm ok, regarding the mlt.c i'll add it together with the makefile modifications |
| 00:51.11 | andrecastelo | (the modifications to include it, that is) |
| 00:51.25 | ``Erik | name wise, you might want to call it viewmlt.c just to be consistent |
| 00:52.12 | andrecastelo | hm ok.. |
| 00:52.16 | andrecastelo | what about the mlt_defs.h ? |
| 00:53.00 | ``Erik | for the Makefile.am, mimic viewedge or viewweight for the automake and if you're slightly off, I'll fix it (I'm not gonna give you too much grief about automake, your native environment is msvc) |
| 00:53.04 | ``Erik | that can stay how it is I think |
| 00:53.56 | ``Erik | unless brlcad disagrees *shrug* he's final authority as far as I'm concerned |
| 00:53.58 | ``Erik | :) |
| 03:06.02 | starseeker_ | Does C have some function I can use to determine the length of a line in a file before I fget it? |
| 03:08.36 | *** join/#brlcad elite01 (n=elite01@dslb-088-071-037-128.pools.arcor-ip.net) |
| 03:08.46 | starseeker_ | or alternatively, can I bu_vls_read a file into a vls struct and then break up the big vls into smaller vls structures according to newlines? |
| 03:17.09 | Maloeran | starseeker, the ANSI compliant way is to fopen(), fseek(), fgetpos(), fclose() to get the file size |
| 03:17.43 | Maloeran | The POSIX way would be to stat() it |
| 03:18.14 | Maloeran | Oh, length of a line. Sorry about that, nevermind, there is no way as far as I know |
| 03:23.14 | brlcad | starseeker_: "why"? |
| 03:25.21 | brlcad | you can use bu_vls_gets if you want to read an unknown length line into a vls |
| 03:26.41 | *** join/#brlcad hippieindamakin8 (n=hippiein@210.212.55.3) |
| 03:32.18 | brlcad | howdy hippieindamakin8 |
| 03:32.32 | hippieindamakin8 | hey brlcad goodevening |
| 03:40.33 | brlcad | heh, http://www.netsoc.tcd.ie/~mu/cgi-bin/shortpath.cgi?from=BRL-CAD&to=Kevin+Bacon |
| 03:48.52 | hippieindamakin8 | so hows it goin |
| 03:49.29 | hippieindamakin8 | brlcad to kevin bacon :) |
| 04:02.45 | starseeker_ | brlcad: re: why - so I can get the remainder of the description line without worrying about having some maximum character length defined for the line in advance |
| 04:03.49 | starseeker_ | the way I've got the nirt option implemented at the moment is fully as hackish as the reading of scripts in the first place... |
| 04:09.36 | brlcad | there's not really a way to do that without architecting something yourself, not that you need/want to |
| 04:11.01 | brlcad | you can either read a character at a time instead of line at a time while parsing the file; use bu_vls_gets(); or stat the file, get the file size, allocate a buffer that size, bu_fgets with that as the buffer |
| 04:11.26 | brlcad | suggests just using bu_vls_gets |
| 05:05.35 | CIA-21 | BRL-CAD: 03brlcad * r31197 10/brlcad/trunk/include/conf/make.vbs: ws |
| 06:34.28 | *** join/#brlcad homovulgaris (i=homovulg@gateway/tor/x-7fb70d4784e7a699) |
| 06:35.44 | homovulgaris | hi all :) |
| 06:37.40 | homovulgaris | Sean, did u check the patch i sent yesterday ? :) |
| 06:43.05 | brlcad | homovulgaris: started to |
| 06:43.16 | brlcad | alas, i'm only running on fumes atm |
| 06:43.37 | brlcad | just one hour z in about 40 hours |
| 06:44.12 | brlcad | what you wrote sounded good |
| 06:44.44 | brlcad | if you're around tomorrow, can go into detail then/there and maybe commit it first thing after the source release is posted |
| 06:48.21 | homovulgaris | :) |
| 06:48.26 | homovulgaris | sounds good |
| 06:49.01 | homovulgaris | though it is pretty clumsy .. i used fprintf instead of bu_log and my own print roots function instead of bn_pr_roots |
| 06:50.56 | homovulgaris | and one issue is ofcourse is the problem with functions like bn_poly_syntheticdivision which are both used by the polynomial solver and at the same time publically available through bn.h |
| 06:51.57 | homovulgaris | so i think for the transition stage we will need to add new functions which perform the same function |
| 06:53.19 | homovulgaris | i'll go have lunch :) |
| 07:00.36 | *** join/#brlcad clock_ (n=clock@zux221-122-143.adsl.green.ch) |
| 07:02.17 | *** join/#brlcad d_rossberg (n=rossberg@bz.bzflag.bz) |
| 07:15.49 | *** join/#brlcad brlcad (n=sean@pdpc/supporter/silver/brlcad) |
| 07:15.49 | *** join/#brlcad d_rossberg (n=rossberg@bz.bzflag.bz) [NETSPLIT VICTIM] |
| 07:15.49 | *** join/#brlcad vedge (n=vedge@205-237-251-204.ilesdelamadeleine.ca) [NETSPLIT VICTIM] |
| 07:15.49 | *** join/#brlcad yukonbob (i=1000@s142-179-54-198.bc.hsia.telus.net) [NETSPLIT VICTIM] |
| 07:15.49 | *** join/#brlcad starseeker (n=starseek@bz.bzflag.bz) [NETSPLIT VICTIM] |
| 07:15.49 | *** join/#brlcad cosurgi (i=janek@irc.cool.waw.pl) [NETSPLIT VICTIM] |
| 07:15.49 | *** mode/#brlcad [+o brlcad] by irc.freenode.net |
| 07:54.23 | *** join/#brlcad hippieindamakin8 (n=hippiein@210.212.55.3) |
| 08:10.09 | *** join/#brlcad Axman6 (n=Axman6@210-11-146-254.netspeed.com.au) |
| 08:24.34 | *** join/#brlcad cazpa (n=cazpa@host81-159-136-48.range81-159.btcentralplus.com) |
| 12:10.42 | *** join/#brlcad thing0 (n=ric@123.208.115.180) |
| 12:23.35 | CIA-21 | BRL-CAD: 03d_rossberg * r31198 10/brlcad/trunk/src/libbu/CMakeLists.txt: Use uce-dirent to provide cross platform dirent functionality. |
| 12:25.51 | CIA-21 | BRL-CAD: 03d_rossberg * r31199 10/brlcad/trunk/src/librt/CMakeLists.txt: g_hyp.c: code to support hyperboloid of one sheet |
| 13:10.17 | *** join/#brlcad cad21 (n=4d3bc1ea@bz.bzflag.bz) |
| 13:10.25 | cad21 | hallo |
| 13:10.49 | cad21 | help |
| 14:20.00 | *** join/#brlcad andrecastelo (n=chatzill@189.71.78.49) |
| 14:20.08 | andrecastelo | good morning :) |
| 14:38.53 | andrecastelo | hey ``Erik, i'm having some trouble here with autogen and configure. I have the latest autoconf, automake and libtool. Here is the paste http://rafb.net/p/QSmMDd33.html |
| 15:15.19 | poolio | mornin' |
| 15:17.51 | *** join/#brlcad thing0 (n=ric@123.208.130.88) |
| 15:40.46 | brlcad | mornin' poolio |
| 17:16.01 | CIA-21 | BRL-CAD: 03brlcad * r31200 10/brlcad/trunk/regress/ (Makefile.am flawfinder.sh repository.sh): break out the repository source consistency checks into their own test instead of keeping them bundled with the flawfinder test |
| 17:31.20 | CIA-21 | BRL-CAD: 03starseeker * r31201 10/brlcad/trunk/src/nirt/if.c: nirt should report a gap whenever the gap los is greater than zero |
| 17:57.57 | CIA-21 | BRL-CAD: 03brlcad * r31202 10/brlcad/trunk/src/nirt/ (command.c conversion.c if.c nirt.c parse_fmt.c showshot.c): ws |
| 18:04.25 | CIA-21 | BRL-CAD: 03starseeker * r31203 10/brlcad/trunk/src/mged/rtif.c: Don't add pix output flag when nirt is the rtcmd - saveview should now provide a working nirt call |
| 18:04.47 | starseeker | glances at irc... |
| 18:05.03 | starseeker | oops - should I quick mucking with things for a bit brlcad? |
| 18:14.18 | ``Erik | ho hum *look* |
| 18:14.56 | ``Erik | try "bash autogen.sh" |
| 18:17.14 | CIA-21 | BRL-CAD: 03johnranderson * r31204 10/brlcad/trunk/include/bu.h: added declarations for bu_vlb routines |
| 18:18.57 | CIA-21 | BRL-CAD: 03johnranderson * r31205 10/brlcad/trunk/include/rtserver.h: added fields required for use of bu_vlb |
| 18:19.11 | prasad_ | whoa jra |
| 18:20.04 | CIA-21 | BRL-CAD: 03johnranderson * r31206 10/brlcad/trunk/include/RtServerImpl.h: added declarations of getRegionNames() and shootList() methods |
| 18:21.33 | CIA-21 | BRL-CAD: 03johnranderson * r31207 10/brlcad/trunk/src/librtserver/rtserver.c: now uses byte array to return results rather than building Java objects in C code |
| 18:30.14 | *** join/#brlcad clock_ (n=clock@77-56-91-193.dclient.hispeed.ch) |
| 18:58.19 | brlcad | ``Erik: he's gone, but it's EOL problems |
| 18:59.21 | brlcad | sh not liking the windows line endings |
| 19:04.24 | ``Erik | I thought he was doing it on a debian |
| 19:05.18 | ``Erik | especially with /mnt/win/ there O.o |
| 19:06.53 | brlcad | and? that looks like a potentially mounted windows filesystem to me |
| 19:07.17 | ``Erik | yeah, windows fs being mounted from a non-windows OS |
| 19:07.27 | ``Erik | cygwin uses /cygdrive/c/, d'no myss |
| 19:07.28 | ``Erik | msys |
| 19:07.40 | ``Erik | updates firmware O.o |
| 19:18.12 | CIA-21 | BRL-CAD: 03brlcad * r31208 10/brlcad/trunk/configure.ac: remove unused checks for sys/unistd.h, lseek(), and regcomp() |
| 19:19.48 | CIA-21 | BRL-CAD: 03brlcad * r31209 10/brlcad/trunk/TODO: once again, incrtcl gets incrshafted. we're good to go |
| 19:49.35 | ``Erik | hrmmmmm |
| 19:49.41 | ``Erik | asc2g and g2asc seem very married to v4 |
| 19:59.50 | brlcad | woot, X11 forwarding to .bz fixed |
| 20:42.15 | *** join/#brlcad elite01 (n=elite01@dslb-088-071-037-128.pools.arcor-ip.net) |
| 20:58.50 | *** join/#brlcad dtidrow (n=dtidrow@c-69-255-182-248.hsd1.va.comcast.net) |
| 21:30.47 | *** join/#brlcad thing0 (n=ric@58.171.2.32) |
| 21:33.44 | *** part/#brlcad thing0 (n=ric@58.171.2.32) |
| 22:13.43 | *** join/#brlcad andrecastelo (n=chatzill@189.71.78.49) |
| 22:14.09 | andrecastelo | hi everyone :D |
| 22:17.52 | pacman87 | hi andrecastelo |
| 22:19.39 | andrecastelo | hi pacman87 :D |
| 23:27.57 | ``Erik | begins the long arduous path of unbreaking this poor machine |
| 23:47.17 | pacman87 | ``Erik: was that due to the firmware update? |
| 23:52.21 | *** join/#brlcad hippieindamakin8 (n=hippiein@203.200.95.130) |