| 00:01.38 | *** join/#brlcad IriX64 (n=IriX64@toronto-HSE-ppp4304778.sympatico.ca) |
| 00:19.19 | *** join/#brlcad IriX64 (n=IriX64@toronto-HSE-ppp4304778.sympatico.ca) |
| 01:38.37 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/doc/description.txt: add a tidbit on some of the humorous incorrect pronounciations that have been overheard as well as an explanation of where the name BRL-CAD comes from |
| 02:29.00 | *** join/#brlcad digitalfredy (n=digitalf@200.71.62.161) |
| 02:34.14 | *** join/#brlcad dan_falck (n=danfalck@pool-71-111-76-8.ptldor.dsl-w.verizon.net) |
| 02:39.15 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/tclscripts/archer/ (Archer.tcl pkgIndex.tcl tclIndex): look for commands in the plugin 'Commands' directory instead of 'Command' to be consistent with 'Wizards' |
| 02:48.15 | *** join/#brlcad ChanServ (ChanServ@services.) |
| 02:48.15 | *** mode/#brlcad [+o ChanServ] by irc.freenode.net |
| 02:59.53 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/tclscripts/archer/pkgIndex.tcl: revert the inadvertent loss of the Archer package |
| 03:10.27 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/libfb/tcl.c: go ahead and check for valid parameters to fb_refresh even if this isn't IF_X |
| 03:12.03 | *** join/#brlcad DTRemenak (n=DTRemena@c-24-23-59-104.hsd1.ca.comcast.net) |
| 03:13.39 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/mged/ged.c: ws |
| 03:29.50 | *** join/#brlcad ChanServ (ChanServ@services.) |
| 03:29.50 | *** mode/#brlcad [+o ChanServ] by irc.freenode.net |
| 03:34.24 | *** join/#brlcad ChanServ (ChanServ@services.) |
| 03:34.24 | *** mode/#brlcad [+o ChanServ] by irc.freenode.net |
| 03:39.19 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/ (20 files in 3 dirs): |
| 03:39.19 | CIA-9 | BRL-CAD: move the Pro/Engineer plugin from misc/pro-engineer to src/external/ProEngineer. |
| 03:39.19 | CIA-9 | BRL-CAD: the new src/external directory is intended for all of the codes that are written |
| 03:39.19 | CIA-9 | BRL-CAD: to work with and link against external packages (often as a plugin to said |
| 03:39.19 | CIA-9 | BRL-CAD: external package) |
| 03:42.13 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/Makefile.am: traverse into src/external for all builds since there may be something to build in there if it was enabled |
| 03:44.04 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/configure.ac: misc/pro-engineer was moved to src/external so update the output Makefiles accordingly as well as the new src/external/Makefile and the plugin resource files |
| 03:49.27 | *** join/#brlcad DTRemenak (n=DTRemena@c-24-23-59-104.hsd1.mn.comcast.net) |
| 03:56.56 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/external/README: describe the contents of this directory and its intent |
| 03:57.27 | *** join/#brlcad IriX64 (n=Who@toronto-HSE-ppp4304022.sympatico.ca) |
| 03:58.18 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/external/Makefile.am: distribute the new README as part of the source dist (oh yeah, the README also includes details on the Pro/Engineer plugin for starters) |
| 04:01.05 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/configure.ac: add some additional pro/engineer enable aliases |
| 04:22.44 | *** join/#brlcad IriX64_ (n=IriX64@toronto-HSE-ppp4304467.sympatico.ca) |
| 04:26.23 | *** join/#brlcad IriX64 (n=IriX64@toronto-HSE-ppp4304467.sympatico.ca) |
| 05:16.48 | *** part/#brlcad IriX64 (n=IriX64@toronto-HSE-ppp4304467.sympatico.ca) |
| 12:30.34 | *** join/#brlcad clock_ (n=clock@zux221-122-143.adsl.green.ch) |
| 14:41.27 | *** join/#brlcad digitalfredy (n=digitalf@200.71.62.161) |
| 14:48.02 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/ (14 files in 2 dirs): moved the Unigraphics importer from src/conv/unigraphics to src/external/Unigraphics since it requires the external UGOPEN library api. |
| 14:49.06 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/conv/Makefile.am: the unigraphics directory is no longer stashed here, it moved to src/external/Unigraphics |
| 14:50.15 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/external/Makefile.am: add Unigraphics to the subdirectory list, moved over from src/conv/unigraphics to here since it relies on the external UGOPEN api/libraries |
| 14:51.11 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/configure.ac: src/conv/unigraphics was moved to src/external/Unigraphics, so update the corresponding Makefile generation |
| 14:54.55 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/external/README: include a blurb about the Unigraphics/NX importer. |
| 15:01.28 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/configure.ac: add configuration options supporting the Unigraphics importer, providing the BUILD_UG symbol if it is to be compiled (used in src/external) |
| 15:05.01 | CIA-9 | BRL-CAD: 03brlcad * 10brlcad/src/external/ProEngineer/.cvsignore: oop, forgot to add the .cvsignore file moved from misc/pro-engineer. add it. |
| 18:16.34 | *** join/#brlcad IriX64 (n=IriX64@toronto-HSE-ppp4304467.sympatico.ca) |
| 18:18.13 | IriX64 | pleasure to meet you all. |
| 18:20.32 | IriX64 | is ftp.brlcad.org maintained by you people? |
| 18:22.46 | IriX64 | urrr theres a skunk in the house. |
| 18:26.40 | IriX64 | the geometry editor is quite good. |
| 18:27.06 | IriX64 | err browser. |
| 18:28.44 | IriX64 | terra.g loads but when trying to display it crashes. |
| 18:29.56 | IriX64 | null mapped bu-pointer line 3135 but i forget the filname might have been g-disp.. |
| 18:34.02 | IriX64 | $ ERROR: NULL bu_mapped_file pointer, file g_dsp.c, line 3135 |
| 18:46.48 | IriX64 | would you like a paste of my current Shot: ? |
| 18:47.54 | IriX64 | SHOT: cpu = 4.938 sec, elapsed = 194.606 sec |
| 18:47.54 | IriX64 | <PROTECTED> |
| 18:47.55 | IriX64 | <PROTECTED> |
| 18:47.55 | IriX64 | Additional mem=1482752., #malloc=795, #free=706, #realloc=17 (89 retained) |
| 18:47.55 | IriX64 | 3224618 solid/ray intersections: 891704 hits + 2332914 miss |
| 18:47.55 | IriX64 | pruned 27.7%: 306831 model RPP, 1824609 dups skipped, 736889 solid RPP |
| 18:47.57 | IriX64 | Frame 0: 476100 pixels in 4.94 sec = 96415.55 pixels/sec |
| 18:47.59 | IriX64 | Frame 0: 659931 rays in 4.94 sec = 133643.38 rays/sec (RTFM) |
| 18:48.01 | IriX64 | Frame 0: 659931 rays in 4.94 sec = 133643.38 rays/CPU_sec |
| 18:48.03 | IriX64 | Frame 0: 659931 rays in 194.61 sec = 3391.11 rays/sec (wallclock) |
| 18:48.05 | IriX64 | Raytrace complete. |
| 18:48.31 | IriX64 | mged> i took your silence as a yes. |
| 18:48.35 | IriX64 | :) |
| 18:49.28 | IriX64 | RTFM = Real Time Frame Measurement? ;) |
| 18:51.26 | *** join/#brlcad digitalfredy (n=digitalf@200.71.62.161) |
| 18:51.52 | IriX64 | SHOT: cpu = 4.938 sec, elapsed = 194.606 sec |
| 18:51.52 | IriX64 | <PROTECTED> |
| 18:51.52 | IriX64 | <PROTECTED> |
| 18:51.53 | IriX64 | Additional mem=1482752., #malloc=795, #free=706, #realloc=17 (89 retained) |
| 18:51.53 | IriX64 | 3224618 solid/ray intersections: 891704 hits + 2332914 miss |
| 18:51.55 | IriX64 | pruned 27.7%: 306831 model RPP, 1824609 dups skipped, 736889 solid RPP |
| 18:51.57 | IriX64 | Frame 0: 476100 pixels in 4.94 sec = 96415.55 pixels/sec |
| 18:51.59 | IriX64 | Frame 0: 659931 rays in 4.94 sec = 133643.38 rays/sec (RTFM) |
| 18:52.01 | IriX64 | Frame 0: 659931 rays in 4.94 sec = 133643.38 rays/CPU_sec |
| 18:52.03 | IriX64 | Frame 0: 659931 rays in 194.61 sec = 3391.11 rays/sec (wallclock) |
| 18:52.05 | IriX64 | Raytrace complete. |
| 18:52.07 | IriX64 | mged> urgggh sorry. |
| 18:56.08 | IriX64 | mged> Building Photon Map: |
| 18:56.09 | IriX64 | <PROTECTED> |
| 18:56.09 | IriX64 | <PROTECTED> |
| 18:56.09 | IriX64 | mged> |
| 18:56.09 | IriX64 | HitGB: 16384,3708 |
| 18:56.09 | IriX64 | Scale Factor: 227.108 |
| 18:56.11 | IriX64 | EPL: 2936811, Adjusted EPL: 2394819 |
| 18:56.13 | IriX64 | <PROTECTED> |
| 18:56.15 | IriX64 | <PROTECTED> |
| 18:58.30 | IriX64 | mged> /me wonders how long this will take. |
| 18:58.37 | IriX64 | err |
| 18:59.58 | ValarQ | IriX64: still got pasting problems? |
| 19:00.36 | IriX64 | yeah, finally figured it out though i think. |
| 19:01.00 | IriX64 | the two environments insist on exclusicve clipboard :) |
| 19:03.50 | IriX64 | when this is done, gonna try my latest build. |
| 19:05.05 | IriX64 | aborted it, installing now im an impatient little sot :) |
| 19:17.57 | siggraph | at 3k rays/sec wallclock, photon mapping would take way way too long |
| 19:18.08 | IriX64 | ray tracing with photon mapping now. |
| 19:18.23 | IriX64 | we'll see. |
| 19:19.18 | siggraph | something still really wrong with your performance numbers .. the rtfm and wallclock should be within at least 10% of each other |
| 19:19.40 | IriX64 | shouldn't have visualized the irradience cache, this is gonna take a while. |
| 19:19.57 | siggraph | has it even said 10% progress yet? :) |
| 19:20.20 | IriX64 | overlaps in havoc cluters the output area. |
| 19:20.24 | siggraph | it gives progress numbers, and it WILL take at least 10 times as long as rt to run unless you pick the worst settings |
| 19:20.43 | IriX64 | did slap me quick :) |
| 19:21.54 | IriX64 | OVERLAP1: /havoc/main_rotor/mr_bldassys/mr_bldassy101/mr_bldroot101/r.bld101 |
| 19:21.54 | IriX64 | OVERLAP2: /havoc/main_rotor/mr_bldassys/mr_bldassy101/mr_spinatch101/r.rot140 |
| 19:21.54 | IriX64 | OVERLAPa: dist=(1602.56,1602.56) isol=s.rot141.i osol=s.rot141 |
| 19:21.54 | IriX64 | OVERLAPb: depth 0.00312mm at (11525.2, -686.324, 2993.31) x0 y0 lvl0 |
| 19:21.54 | IriX64 | (overlaps omitted) |
| 19:21.54 | IriX64 | OVERLAP1: /havoc/main_rotor/mr_bldassys/mr_bldassy101/mr_bldroot101/r.bld101 |
| 19:21.56 | IriX64 | OVERLAP2: /havoc/main_rotor/mr_bldassys/mr_bldassy101/mr_spinatch101/r.rot140 |
| 19:21.58 | IriX64 | OVERLAPa: dist=(3911.53,3911.53) isol=s.rot141.i osol=s.rot141 |
| 19:22.05 | IriX64 | thats whats going on. |
| 19:22.26 | IriX64 | heh sorry. |
| 19:22.33 | siggraph | feel free to fix them and submit an updaated havoc.g |
| 19:22.49 | IriX64 | all right if you fix april.g ;) |
| 19:23.10 | siggraph | i'd send you something like april.g if you did that |
| 19:23.39 | IriX64 | im lousy at cadding, use other peoples work to do my testing. |
| 19:24.22 | IriX64 | irradiance cache progress 50% |
| 19:24.26 | siggraph | fixing overlaps is pretty easy .. you run rtcheck and it'll highlight the overlapping areas -- outputs a list of the geometry pairs too |
| 19:24.45 | siggraph | usually a simple matter of moving one object ever so slightly or subtracting one from the other |
| 19:24.58 | siggraph | the one you pasted overlaps by just 0.00312mm |
| 19:25.05 | IriX64 | why not use the overlap tool ? |
| 19:25.26 | siggraph | could use that too |
| 19:25.35 | IriX64 | smokeity smoke time bbiab. |
| 19:26.19 | siggraph | woo.. new macbook pro has a VGR count of roughly 4800k... nice.. |
| 19:26.29 | siggraph | s/00k/00/ |
| 19:35.09 | ``Erik | o.O |
| 19:45.56 | *** join/#brlcad digitalfredy (n=digitalf@200.71.62.161) |
| 19:49.58 | *** join/#brlcad DTRemenak (n=DTRemena@c-24-23-59-104.hsd1.ca.comcast.net) |
| 20:25.14 | IriX64 | well it did it. |
| 20:26.41 | IriX64 | what are you expecting another paste? :) |
| 20:27.06 | IriX64 | my paste buffer runneth over :) |
| 20:28.07 | IriX64 | siggraph: havoc.g your effort? |
| 20:34.07 | IriX64 | no treads on the tires, just like the deauce and a half :) |
| 20:44.07 | IriX64 | sweet s zoomed view, lets try a rotated view. |
| 20:45.37 | IriX64 | she's showing me her underbelly :) |
| 20:49.48 | IriX64 | would be too hard to paste this into the channel, but if anybody wants a screen shot ill supply. |
| 20:55.21 | IriX64 | ok ive played with 5-click long enough time to buy the little gem, ill be away for a bit. |
| 21:05.03 | IriX64 | there legally mine. |
| 21:30.35 | IriX64 | bbiab |
| 21:40.40 | *** join/#brlcad IriX64 (n=IriX64@toronto-HSE-ppp4304467.sympatico.ca) |
| 22:01.13 | *** join/#brlcad boemann (n=cbr@213.237.55.84.adsl.nivaa.worldonline.dk) |
| 22:01.19 | boemann | Hi there |
| 22:01.35 | boemann | a quick question not really related to brl |
| 22:02.11 | boemann | Are homogenous coordinates need internally in a cad application? |
| 22:02.39 | boemann | or will x,y,z do for storage and manipulation |
| 22:13.00 | boemann | never mind - stupid question of course they are |
| 22:13.34 | *** part/#brlcad boemann (n=cbr@213.237.55.84.adsl.nivaa.worldonline.dk) |
| 22:38.38 | IriX64 | mmm a monolouge ;) |
| 22:47.01 | IriX64 | | bjorkBSD (n=bjork@ip70-178-169-173.ks.ks.cox.net) (Network) |
| 22:47.01 | IriX64 | 3 ircname : bjork whoElse? |
| 22:47.01 | IriX64 | | channels : ##opera ##freebsd #openlaszlo #brlcad #r |
| 22:47.01 | IriX64 | 3 server : irc.freenode.net (http://freenode.net/) |
| 22:47.06 | IriX64 | <PROTECTED> |
| 22:47.19 | IriX64 | #opera? |
| 22:47.56 | IriX64 | werks ;) |
| 22:48.46 | *** join/#brlcad DTRemenak|RDP (n=DTRemena@c-24-23-59-104.hsd1.ca.comcast.net) |
| 22:50.57 | IriX64 | [ctcp(bjorkBSD)] VERSION |
| 22:50.57 | IriX64 | <PROTECTED> |
| 22:50.57 | IriX64 | <PROTECTED> |
| 22:50.57 | IriX64 | [ctcp(IriX64)] VERSION |
| 22:50.57 | IriX64 | >>> IriX64 [n=IriX64@toronto-HSE-ppp4304467.sympatico.ca] requested VERSION |
| 22:50.57 | IriX64 | <PROTECTED> |
| 22:50.59 | IriX64 | <PROTECTED> |
| 22:51.01 | IriX64 | <PROTECTED> |
| 22:51.22 | IriX64 | bjorkBSD wheres you get the xchat source? |