| 03:06.31 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/m4/compiler.m4: make the compiler, linker, and preprocessor checks look for 'nrecognize' in the test output in case the return value happens to be zero so that options are properly enabled/disabled. |
| 03:13.39 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/configure.ac: |
| 03:13.39 | CIA-5 | BRL-CAD: get rid of the -fPIC hack, libtool really should take care of it (figure out the |
| 03:13.39 | CIA-5 | BRL-CAD: altix problem later if it's still around); get rid of -mdynamic-no-pic as it |
| 03:13.39 | CIA-5 | BRL-CAD: wasn't supposed to actually get added to a flag, it only encouraged the test to |
| 03:13.40 | CIA-5 | BRL-CAD: fail on non darwin systems before the tests were refactored to BC_ tests. |
| 04:18.43 | *** join/#brlcad PrezKennedy (n=Apathy@pcp0011645240pcs.aberdn01.md.comcast.net) |
| 07:56.19 | *** join/#brlcad ibot (i=ibot@rikers.org) |
| 07:56.19 | *** topic/#brlcad is http://brlcad.org/ || BRL-CAD is now Free Software! |
| 09:35.10 | *** join/#brlcad clock_ (n=clock@236.6.76.83.cust.bluewin.ch) |
| 09:59.22 | *** join/#brlcad cad562 (n=93e4292a@bz.bzflag.bz) |
| 12:34.05 | CIA-5 | BRL-CAD: 03d_rossberg * 10brlcad/src/libwdb/vol.c: machine.h requires stdio.h |
| 12:35.56 | CIA-5 | BRL-CAD: 03d_rossberg * 10brlcad/src/libwdb/submodel.c: machine.h requires stdio.h |
| 12:37.07 | CIA-5 | BRL-CAD: 03d_rossberg * 10brlcad/src/libwdb/ (dsp.c ebm.c): machine.h requires stdio.h |
| 12:48.22 | *** join/#brlcad learner (n=brlcad@pdpc/supporter/silver/brlcad) [NETSPLIT VICTIM] |
| 12:48.22 | *** join/#brlcad clock_ (n=clock@236.6.76.83.cust.bluewin.ch) [NETSPLIT VICTIM] |
| 12:48.22 | *** join/#brlcad Guu (i=guu@myth.gibbscam.com) [NETSPLIT VICTIM] |
| 12:48.22 | *** join/#brlcad archivist_ (n=archivis@host217-35-103-47.in-addr.btopenworld.com) [NETSPLIT VICTIM] |
| 12:48.22 | *** join/#brlcad ``Erik (i=erik@pcp0011474399pcs.chrchv01.md.comcast.net) [NETSPLIT VICTIM] |
| 12:48.22 | *** join/#brlcad AchiestDragon (n=dave@whipy.demon.co.uk) [NETSPLIT VICTIM] |
| 12:48.22 | *** join/#brlcad CIA-5 (n=CIA@flapjack.navi.cx) [NETSPLIT VICTIM] |
| 12:48.22 | *** mode/#brlcad [+o learner] by irc.freenode.net |
| 12:49.50 | CIA-5 | BRL-CAD: 03d_rossberg * 10brlcad/src/libsysv/engine.c: MS VC 6.0 complained about a control path that does not return a value |
| 12:54.34 | *** join/#brlcad d_rossberg (n=c28bf505@bz.bzflag.bz) |
| 12:56.18 | CIA-5 | BRL-CAD: 03d_rossberg * 10brlcad/src/librt/db_io.c: variable s only if HAVE_UNIX_IO |
| 12:57.44 | CIA-5 | BRL-CAD: 03d_rossberg * 10brlcad/src/librt/g_bot.c: unused variable deleted |
| 13:27.17 | *** join/#brlcad clock__ (n=clock@78.55.3.213.cust.bluewin.ch) |
| 13:41.26 | *** join/#brlcad Twingy_ (n=justin@pcp0011647505pcs.aberdn01.md.comcast.net) |
| 14:09.47 | brlcad_ | d_rossberg: I know machine.h says it needs it.. but I don't see why exactly it should need stdio.h |
| 14:10.10 | clock__ | brlcad_: will you be able to use my bolt generation code? |
| 14:10.17 | brlcad_ | was there a symbol causing trouble? |
| 14:10.23 | brlcad_ | clock__: definitely |
| 14:10.50 | clock__ | brlcad_: and put it into the brlcad program? |
| 14:11.07 | brlcad_ | that would be the idea :) |
| 14:11.57 | brlcad_ | probably as a standalone tool for starters, eventually as a procedural geometry generator when the new interface is up |
| 14:12.31 | brlcad_ | though I'd also want to convert it to the binary api too instead of ascii |
| 14:13.01 | brlcad_ | post it up as a patch, and I should be able to get it in today probably |
| 14:17.09 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/include/machine.h: machine.h apparently requires stdio.h so migrate towards self-describing headers (even though machine.h is going away soon) |
| 14:34.11 | d_rossberg | brlcad: machine.h asks for FOPEN_MAX which is defined in stdio.h |
| 14:35.04 | d_rossberg | I got a compiler warning when stdio.h was included after machine.h |
| 14:35.05 | brlcad_ | as an ifdef though.. so you're seeing redifine warnings/errors? |
| 14:35.15 | brlcad_ | got it |
| 14:36.30 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/include/machine.h: needed for FOPEN_MAX |
| 14:36.35 | brlcad_ | d_rossberg: on a side note, no headers should appear before common.h in any file |
| 14:40.38 | d_rossberg | brlcad: ok, i'll have a look at this (but maybe not today) |
| 14:41.09 | brlcad_ | order is common then single interface header if it exists then system headers then common interface headers then local headers |
| 14:41.21 | d_rossberg | I try to eliminate all MSVC compiler warnings, because they may lead to crashes |
| 14:41.39 | brlcad_ | d_rossberg: no worries, I fixed the headers already |
| 14:42.44 | d_rossberg | it's not about the header, it's about the sources i've changed with stdio.h on the top |
| 14:42.46 | brlcad_ | yeah, I've got a similar laundry list of warning squashing to go through -- causes similar issues on some 64bit systems (e.g. when a header is missing and function is presumed to return an "int") |
| 14:43.13 | brlcad_ | d_rossberg: i know -- i mean i've fixed those already too -- about to commit them |
| 14:43.44 | d_rossberg | brlcad: thanks |
| 14:44.07 | brlcad_ | i'm just happy I actually get to code today ;) |
| 14:44.26 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/src/libwdb/ (dsp.c ebm.c submodel.c vol.c): machine.h includes stdio.h, common.h goes first too |
| 14:46.21 | d_rossberg | fyi: a compiler warning in MSVC may be an indication of a "confused" compiler which may produce wrong code, especially in the release build |
| 14:46.43 | clock__ | "S" and "V". |
| 14:46.44 | brlcad_ | good to know |
| 14:56.47 | clock__ | sometimes you even have to delete windows and replace them with linux to get rid of a problem |
| 14:56.53 | clock__ | rebooting may not be sufficient |
| 14:57.03 | clock__ | or even reinstalling windows may be insufficient ;-) |
| 14:57.12 | ``Erik | meh, linux has it's own issues, freebsd, baybee |
| 14:57.26 | clock__ | yes luniks is krap :) |
| 14:57.55 | archivist_ | well use djgpp for the windows port |
| 14:58.14 | ``Erik | cygwin? |
| 14:58.43 | ``Erik | (I thought djgpp ended as a 32b dos compiler, no goop to wire to nt based crap?) |
| 15:01.39 | brlcad_ | msys for the purist |
| 15:17.29 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/TODO: aix build fixes, configure option for no flag dorkage, and fixing benchmark path issue before next release |
| 15:26.35 | *** join/#brlcad clock_ (n=clock@14.2.203.62.cust.bluewin.ch) |
| 16:08.21 | *** join/#brlcad PrezKennedy (n=Apathy@pcp0011645240pcs.aberdn01.md.comcast.net) |
| 16:29.51 | *** join/#brlcad DTRemenak (n=DTRemena@DHCP-170-143.caltech.edu) |
| 17:13.23 | ``Erik | done with my disc yet, boy? |
| 17:14.20 | brlcad | yep |
| 18:47.47 | *** mode/#brlcad [+o brlcad] by ChanServ |
| 18:57.37 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/BUGS: g2asc exports attr lines but will not grok them on asc2g |
| 18:58.35 | CIA-5 | BRL-CAD: 03brlcad * 10brlcad/TODO: mged should add bin dir to search path so that subcommands like rt and company work as expected without path problems |
| 20:03.09 | *** join/#brlcad Obscene_CNN (n=DiscoBan@owt-64-146-239-67.owt.com) |
| 22:03.13 | *** join/#brlcad pra5ad (n=prasad@pool-70-17-203-138.balt.east.verizon.net) |
| 22:03.31 | Twingy_ | Ö.ö |
| 22:24.11 | *** join/#brlcad pra5ad (n=prasad@pool-70-17-203-138.balt.east.verizon.net) |
| 22:39.04 | *** join/#brlcad clock_ (n=clock@84-72-92-90.dclient.hispeed.ch) |
| 22:49.17 | *** join/#brlcad pra5ad_ (n=prasad@pool-70-17-203-138.balt.east.verizon.net) |
| 23:09.48 | *** join/#brlcad clock_ (n=clock@84-72-92-90.dclient.hispeed.ch) |