00:05.03 | *** part/#asterisk g_r_eek (~g_r_eek@173-9-142-122-Miami.FL.hfc.comcastbusiness.net) |
00:09.46 | *** join/#asterisk Quest (~syncsys@175.110.60.139) |
00:09.55 | Quest | hi |
00:10.33 | Quest | what software are recomended for asterisk installation? i mean which OS and any utilities like freepbx or trixbox or asterisknow etc? |
00:10.42 | *** part/#asterisk Juggie (~Juggie@unaffiliated/juggie) |
00:11.09 | *** join/#asterisk jdummy (6cb742fc@gateway/web/freenode/ip.108.183.66.252) |
00:11.44 | *** join/#asterisk mjordan (~mjordan@nat/digium/x-facywbmgxbgtxovz) |
00:11.44 | *** mode/#asterisk [+o mjordan] by ChanServ |
00:12.27 | jdummy | Hi All... I've just installed asterisk now, but it doesn't install a gui and I can't access it remotely. How does one connect to the freepbx web based gui? |
00:13.06 | *** join/#asterisk g_r_eek (~g_r_eek@173-9-142-122-Miami.FL.hfc.comcastbusiness.net) |
00:13.27 | jdummy | AsteriskNow gave the machine an IP of 10.0.2.15, but that's not from my DHCP server, which gives IPs in the 192.168.x.x range. |
00:14.07 | jdummy | I must be missing something painfully obvious. Thanks in advance for your help, |
00:16.16 | [TK]D-Fender | jdummy: Where do you see it having gotten that address? |
00:16.28 | [TK]D-Fender | Quest: Whatever you want to run |
00:16.50 | Quest | whats most recomended |
00:17.01 | jdummy | When I boot the machine, it says I can access it by visiting that IP in my browser. Also, ifconfig |
00:17.18 | [TK]D-Fender | Quest: Compile from source on a server you're already running and capable of administering |
00:17.41 | [TK]D-Fender | jdummy: If that wasn't pulled from DHCP it must have been given to it |
00:17.49 | Quest | ok |
00:18.00 | [TK]D-Fender | jdummy: That's basic CentOS under the hood so changing the NIC properties is standard |
00:18.20 | [TK]D-Fender | Quest: The more important question is what you want to get out of Asterisk |
00:18.58 | jdummy | Hmmm... weird. I can ping out to google. AND... if I change the IP to a static in the 192.168.x.x format, I can no longer ping out |
00:20.28 | Quest | k |
00:20.40 | jdummy | I'm running it in a virtualbox... that may have something to do with it. I'll dig around. Thanks [TK]D-Fender |
00:23.51 | jdummy | [TK]D-Fender: I'm a dummy :) My virtualbox instance had the network adaptor setup for 'NAT', but it needed to be a 'bridged adaptor'. Thanks again |
00:27.02 | *** join/#asterisk coppice (~chatzilla@123203240234.ctinets.com) |
00:30.50 | *** part/#asterisk [TK]D-Fender (~chatzilla@64.235.216.2) |
00:30.57 | *** join/#asterisk [TK]D-Fender (~chatzilla@64.235.216.2) |
00:31.01 | [TK]D-Fender | gah |
00:33.14 | *** part/#asterisk deviantlinux (~ryan_gpx@unaffiliated/deviantlinux) |
00:36.36 | *** join/#asterisk Linkforsoad (~Linkforso@2001:1af8:fec1:0:c8a5:2373:bd7a:ef69) |
00:38.28 | *** join/#asterisk WIMPy (~wimpy@e183095026.adsl.alicedsl.de) |
01:01.22 | *** join/#asterisk alhemicar (~alhemicar@178.77.7.31) |
01:25.27 | *** part/#asterisk alhemicar (~alhemicar@178.77.7.31) |
01:29.27 | *** join/#asterisk slav3_kitten (~frankthet@unaffiliated/slav3-kitten/x-0866809) |
01:30.56 | *** join/#asterisk deo_ (~deo@203.177.214.75) |
01:40.47 | *** join/#asterisk Bradada (~Bradada@59-120-137-34.hinet-ip.hinet.net) |
01:42.59 | *** join/#asterisk deo_ (~deo@203.177.214.75) |
01:49.57 | *** join/#asterisk Bradada (~Bradada@59-120-137-34.HINET-IP.hinet.net) |
01:56.06 | *** join/#asterisk Bradada (~Bradada@220-135-49-159.HINET-IP.hinet.net) |
02:01.36 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
02:01.36 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
02:18.24 | *** join/#asterisk deo__ (~deo@203.177.214.75) |
02:19.45 | *** join/#asterisk [TK]D-Fender (~chatzilla@64.235.216.2) |
02:19.50 | *** join/#asterisk youjelly (~youjelly@ec2-50-18-46-173.us-west-1.compute.amazonaws.com) |
02:34.57 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.126.96) |
03:01.13 | *** join/#asterisk deo_ (~deo@58.71.19.178) |
03:13.21 | *** join/#asterisk jrose_atDigium (~jrose_atD@nat/digium/x-stmfeddqcqgvmvzz) |
03:17.17 | *** join/#asterisk miguel3239 (~miguel323@2001:470:1f06:12c4::2) |
03:24.50 | *** join/#asterisk coppice (~chatzilla@123203240234.ctinets.com) |
03:25.48 | *** join/#asterisk amessina (~amessina@2001:470:c1dc:7779:d6be:d9ff:fe8d:7c1e) |
03:31.46 | Kobaz | soooooo |
03:31.58 | Kobaz | why would all of a suddon all my phones go unreachable in asterisk |
03:32.08 | Kobaz | but i can still ping the phones, access their web interfaces, etc |
03:33.59 | *** join/#asterisk Changos (~Changos@unaffiliated/changos) |
03:35.44 | Kobaz | weird |
03:35.53 | Kobaz | had to restart asterisk twice and now it's working properly |
03:57.42 | *** part/#asterisk StrangeWill (~William_R@host-66-85-224-48.BROOLT1.epbfi.com) |
04:01.40 | *** join/#asterisk Rahail (~Rahail@67.214.121.163) |
04:01.53 | Rahail | Hi quesiton if i am using realtime iax/sip how can see if they are register or not |
04:02.32 | *** join/#asterisk linocisco (~linocisco@193.134.242.12) |
04:05.35 | *** join/#asterisk jodie (~chatzilla@137.84.129.105) |
04:05.56 | linocisco | hi all where can I get new asterisk sound files? |
04:06.00 | linocisco | ready to use |
04:06.54 | *** join/#asterisk Bradada (~Bradada@59-120-137-34.HINET-IP.hinet.net) |
04:12.15 | *** join/#asterisk mintos (mvaliyav@nat/redhat/x-mjwekhnwnhpjcocu) |
04:16.15 | *** join/#asterisk FireAndIce (~FireAndIc@123.201.170.49) |
04:29.06 | igcewieling | downloads.digium.com |
04:48.24 | *** join/#asterisk vinhdizzo (~vinh@cpe-66-74-182-202.socal.res.rr.com) |
04:49.19 | apb1963_ | meetme anyone? .All I get are a few beeps and it doesn't connect to the conference. Here's the log: http://ix.io/5eE |
04:51.18 | apb1963_ | The basic problem is: app_meetme.c: Error: conference (8000001) not found |
04:52.25 | *** join/#asterisk evil_gordita (~evilgordi@ip70-188-50-186.rn.hr.cox.net) |
04:53.31 | kaldemar | apb1963_: you need to configure it in meetme.conf |
04:57.21 | *** join/#asterisk taylorbyte2013 (~cyberninj@49.176.98.32) |
05:03.28 | apb1963_ | kaldemar: thank you. To the best of my knowledge, I've done that. |
05:05.26 | *** join/#asterisk iprouteth0 (~james@unaffiliated/iprouteth0) |
05:05.29 | apb1963_ | I have: conf => 8600001 do I need something else? |
05:05.39 | apb1963_ | oh crud |
05:05.46 | apb1963_ | I just spottted it |
05:05.47 | apb1963_ | lol |
05:05.53 | iprouteth0 | still geeked about getting sip/tls and srtp working :) |
05:07.37 | iprouteth0 | even did the packet capture with sipdump and sipcrack. all is well |
05:21.14 | drmessano | tls/srtp is pretty sweet |
05:21.31 | drmessano | Did you use a package for SRTP or compile from source? |
05:23.14 | *** join/#asterisk kinnarr (~kinnarrir@p54AE5EEF.dip0.t-ipconnect.de) |
05:23.33 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.124.99) |
05:23.43 | *** part/#asterisk kinnarr (~kinnarrir@p54AE5EEF.dip0.t-ipconnect.de) |
05:24.01 | iprouteth0 | used package in the repo....running it on a router with openwrt |
05:24.09 | *** join/#asterisk zerohalo (~zerohalo@74.61.196.236) |
05:25.17 | drmessano | I ask because there's a couple of patches for libsrtp... One for a memory leak, and one that apparently prevents a crash in Asterisk under certain conditions. Neither have been merged or even looked at, it appears |
05:25.38 | drmessano | I keep a tarball with those patches applied |
05:26.36 | iprouteth0 | I can work with the developer who ported asterisk 11 to openwrt to have them committed over there |
05:26.36 | *** join/#asterisk gerhard7 (~gerhard7@77-172-47-159.ip.telfort.nl) |
05:26.51 | iprouteth0 | its 11.2.1 currently |
05:27.17 | drmessano | Ok.. Let me see if I can find the links to them. One is in a bug report, and one is in a post on the forum for the project in sourceforge |
05:27.46 | drmessano | Lemme see if I have the diff's |
05:28.33 | iprouteth0 | I have to restart asterisk routinely otherwise it sometimes has issues. This was also occurring before the encryption |
05:29.11 | iprouteth0 | I have that in a cronjob currently |
05:29.55 | drmessano | Ok, heres one.. Check the attached file |
05:29.56 | drmessano | http://sourceforge.net/tracker/?func=detail&aid=3568831&group_id=38894&atid=423799 |
05:31.33 | drmessano | http://sourceforge.net/mailarchive/forum.php?thread_name=CAGJ9%2BOP%3DpcjGz2LjOtsnAXf_zUnT9C32WSgiMPG%3D2w9pWbVT%3DQ%40mail.gmail.com&forum_name=srtp-development |
05:31.50 | drmessano | Scroll to the bottom. Read the description in the patch itself |
05:32.20 | drmessano | No, thats not where the description is. Crap |
05:32.29 | iprouteth0 | so that should be able to be patched without patching any of asterisk? |
05:32.32 | apb1963_ | me too iprouteth0 |
05:32.50 | drmessano | Correct, those are patched for srtp itself |
05:32.55 | drmessano | patches |
05:32.57 | iprouteth0 | apb1963: ?? |
05:33.09 | apb1963_ | rebooting asterisk issue... in a cron job |
05:33.37 | iprouteth0 | I see. what sort of system is it on? |
05:33.39 | apb1963_ | every morning, 6:30 am come smell or high water |
05:34.31 | iprouteth0 | I've really never spent enough time troubleshooting the cause since it's an embedded device and I want to preserve the life of the flash |
05:34.47 | apb1963_ | FreePBX 2.11.0.0beta2.2 on ubuntu-12.04.1-server as a guest OS courtesy of VMware® Player 5.0.1 build-894247 running under Windows XP Professional 5.1.2600, Service Pack 3 running on a ASUSTeK Computer INC. A8N-VM Rev 1.xx mamaboard with a bus Clock of 200 megahertz and using an American Megatrends Inc. 0610 BIOS from 12/30/2005 and a 2.40 gigahertz AMD Athlon64 X2 Dual Core processor with a 128 kilobyte primary memory cache & 512 kilobyte secondary m |
05:35.13 | drmessano | iprouteth0, is asterisk compiled with the LOW_MEMORY flag for that device? |
05:35.17 | iprouteth0 | I use google voice as my trunk and sip for my endpoints. not sure which side or if it's the core software thats at fault |
05:35.23 | apb1963_ | Hey... me too! |
05:35.37 | apb1963_ | GV trunk... sip softphones |
05:35.48 | apb1963_ | phone |
05:35.51 | apb1963_ | singular |
05:35.52 | iprouteth0 | thats a good question. I'm not sure that it is.. I can ask the dev |
05:36.02 | iprouteth0 | csipsimple for me |
05:36.27 | drmessano | iprouteth0, LOW_MEMORY is a guaranteed crash. I've seen it mentioned a few times that's currently broken |
05:36.33 | iprouteth0 | I would want to get it off of the virtual machine to start |
05:36.42 | apb1963_ | Eventually |
05:36.48 | apb1963_ | funds are strained |
05:36.58 | iprouteth0 | me as well |
05:37.23 | apb1963_ | I was forced to buy a hard disk I really didn't need to fix a corrupted boot file |
05:37.31 | apb1963_ | Paid too much, got too little. |
05:37.43 | apb1963_ | Now the old one sits doing nothing |
05:37.54 | iprouteth0 | one has to cross compile for this system so I generally use the repositories, but I've got an ongoing dialogue with the dev who ported the version I am on |
05:37.56 | apb1963_ | Cloned it first |
05:38.34 | apb1963_ | sorry... I missed it... what kind of system? |
05:38.44 | iprouteth0 | I usually reconfigure half from scratch half from old conf files.. But bare asterisk on a router is a different animal than freepbx |
05:39.03 | apb1963_ | no doubt |
05:39.11 | iprouteth0 | I do like freepbx very much despite it's many hiccups and somewhat ugly source |
05:39.38 | drmessano | FreePBX is getting better. GIve it time |
05:39.47 | drmessano | Much of that ugly code is being weeded out |
05:39.51 | iprouteth0 | buffalo wzr-hp-g300nh |
05:39.54 | apb1963_ | i have no real complaints with fpbx |
05:40.03 | apb1963_ | what the heck is that? |
05:40.09 | iprouteth0 | with an 8gb flashdrive as an extroot overlay |
05:40.15 | drmessano | nice |
05:40.21 | iprouteth0 | its a bufallo gigabit wireless n router |
05:40.42 | drmessano | OpenWRT you say? |
05:40.46 | iprouteth0 | has a lot of memory and flash... much more than many soho routers |
05:40.48 | iprouteth0 | yes |
05:40.59 | apb1963_ | so you're running * on the router itself? wow... never thought about that... any special reason why? |
05:41.52 | *** join/#asterisk mnathani (~mnathani@198-84-231-11.cpe.teksavvy.com) |
05:42.42 | drmessano | I need to give OpenWRT a shot again. I went to DD-WRT years ago because of a few issues I had with OpenWRT.. Now that I am trading in my WRT54G's for newer hardware, I am finding more and more that having one dev working on DD-WRT isn't cutting it for keeping current with new hardware |
05:43.00 | apb1963_ | no doubt |
05:43.23 | *** join/#asterisk iprouteth0 (~james@unaffiliated/iprouteth0) |
05:43.33 | iprouteth0 | ok what was that last question? |
05:43.56 | iprouteth0 | ah I see it now |
05:44.41 | iprouteth0 | I run it on the router as I have no other server hardware to use |
05:45.24 | apb1963_ | I didn't even know it was possible to do such a thing... |
05:45.36 | apb1963_ | it's something I simply would never have considered |
05:45.39 | iprouteth0 | I've been doing it for almost 3 years now |
05:45.43 | apb1963_ | of course... I don't have a router to play with. |
05:45.54 | iprouteth0 | it can be nice as the server has the public IP |
05:46.02 | apb1963_ | Actually... I do have an ancient one in the closet somewhere. |
05:46.18 | iprouteth0 | just have to configure your firewall correctly, and that can easily be done in the router's luci web interface that can be optionally installed |
05:46.29 | apb1963_ | sure |
05:46.50 | apb1963_ | I just didn't know you could load a program onto a router. The one and only router I've owned... I doubt that could be done. |
05:46.50 | iprouteth0 | i run the trunk version since it has asterisk 11 in the repo |
05:47.02 | drmessano | Looks like no support for the Cisco M20 |
05:47.04 | iprouteth0 | its like dd-wrt but way better |
05:47.11 | apb1963_ | again... no knowledge. |
05:47.43 | iprouteth0 | custom firmwares for many routers. DD-WRT supports more models but has less features and configurability |
05:47.43 | apb1963_ | actually... I did own a second router very briefly recently. |
05:47.59 | iprouteth0 | openwrt has more devs also so it is maintained a bit better |
05:48.07 | apb1963_ | yeah... I was thinking the only way to do it would be to flash the firmware. unless they had some other way. |
05:48.21 | drmessano | iprouteth0, you mean more than 1 dev? |
05:48.24 | drmessano | lol |
05:48.27 | iprouteth0 | the bufallo wzr-hp-g300nh can easily run openwrt |
05:48.37 | iprouteth0 | yeah, right drmessano...lol |
05:48.51 | iprouteth0 | I call it the "chuch of brainslayer" |
05:49.06 | apb1963_ | I've been led to believe a raspberry pi is the way to go in order to dispense with my VM |
05:49.23 | iprouteth0 | he does good work but it doesnt hold a canlde to openwrt imho |
05:49.47 | iprouteth0 | rasp pi is great now that it's 512mb of ram |
05:49.55 | apb1963_ | that's it? |
05:49.57 | apb1963_ | wow |
05:49.59 | iprouteth0 | also check out the odroid x or some such |
05:50.08 | apb1963_ | MB or GB? |
05:50.12 | iprouteth0 | mb |
05:50.15 | apb1963_ | wow |
05:50.31 | iprouteth0 | if you don't run X11 it doesnt need much |
05:50.34 | apb1963_ | I don't |
05:50.46 | apb1963_ | It never runs out of the box for me |
05:51.01 | apb1963_ | then again... I got the server version so I suppose it's not meant to. |
05:51.07 | drmessano | iprouteth0, looks like the Cisco Valet M20 (AKA WRT320Nv2) isn't even a WIP yet. Damn |
05:51.17 | iprouteth0 | though there is pbx in a flash and straigh freepbx/asterisk for it I'd be inclined just run only asterisk to save mem on mysql and apace |
05:51.56 | iprouteth0 | yeah, openwrt has less models it supports than dd-wrt |
05:52.08 | iprouteth0 | I bought mine with the intent of running openwrt |
05:53.01 | drmessano | I bought the M20's because the refurbs on Amazon are cheap, they're N300, run DD-WRT, have Gigabit ports, and they're white |
05:53.05 | drmessano | So yeah |
05:53.05 | drmessano | lol |
05:54.47 | drmessano | I need to buy a Buffalo box at some point. I've heard nothing but awesome things |
05:59.00 | jeev | buffalo > * |
05:59.07 | iprouteth0 | this one is interesting as its a bit newer and beefier |
05:59.08 | iprouteth0 | http://wiki.openwrt.org/toh/buffalo/wzr-600dhp |
05:59.22 | iprouteth0 | this is mine http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h |
05:59.26 | jeev | i have a wzr-hp-g300nh somewhere, i bricked one though ;) i didn't pay attention, it was a never revision. |
06:00.43 | iprouteth0 | cheapest I found mine on google shopping is around 50 us with shipping |
06:00.44 | iprouteth0 | http://www.aztekcomputers.com/WZRHPG300NHR-BUFFALO-2036970.html |
06:00.56 | iprouteth0 | they are actually very easy to unbrick |
06:01.07 | iprouteth0 | they listen for a TFTP connection shortly after power on |
06:01.14 | jeev | not this one. lol |
06:01.25 | iprouteth0 | you have to set a static ip on the PC and a static mac address to a certain setting |
06:01.28 | jeev | i've unbricked a lot.. |
06:01.29 | jeev | of things |
06:01.43 | iprouteth0 | It will only listen from the specific mac address |
06:02.10 | jeev | iprouteth0, i'm confident that this thing was just dead. it doesn't matter, i exchanged it, it went back to the manufacturer, let them suck on my mistake! |
06:02.12 | iprouteth0 | but you tftp put to it and put packet trace on so you can watch it transfer and also you can set the retries very high |
06:02.33 | iprouteth0 | lol. word to that. Sometimes an RMA is much more worthwhile |
06:02.46 | *** join/#asterisk Changos (~Changos@unaffiliated/changos) |
06:03.40 | drmessano | Changos? |
06:03.46 | drmessano | Chang has an OS now? |
06:03.47 | iprouteth0 | I love my buffalo... Wireless has gotten a bit flaky, but it's been heavily used |
06:03.53 | drmessano | What happen to his Changnesia? |
06:04.08 | iprouteth0 | I moved it to the central office I work in so now it's wireless is not even active |
06:04.45 | drmessano | I haven't used anything but WRT54G's until a few months ago |
06:05.43 | jeev | wow drmessano, i had some respect for you.. when i say some, i mean none.. but now you're in the negatives!!! who uses linksys?!?! |
06:05.52 | drmessano | I bought a dozen WRT54Gv2's in 2006, deployed them, and they've been reliable as hell |
06:06.14 | drmessano | The WRT54G is a classic |
06:07.06 | jeev | yea i guess i had a sucker customer with one |
06:07.08 | drmessano | I decided when I got an iPhone 4s that it was time to upgrade to N at home.. so I jumped on the Cisco M20s. |
06:07.12 | jeev | iphone?? |
06:07.13 | jeev | wow |
06:07.32 | drmessano | Who has time for Assdroid? |
06:07.44 | drmessano | I need a phone that works |
06:08.20 | jeev | funny |
06:08.28 | drmessano | Not at all |
06:10.21 | drmessano | Support a bunch of users with an array of Assdroid devices. It's very telling |
06:12.23 | jeev | drmessano, i can't handle a bunch of iphone users, it's like working with a bunch of morons who have erections over aluminum. |
06:12.47 | jeev | my favorite part was when they all call and still call their iphone 4's "4g" |
06:12.58 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.33) |
06:13.21 | *** join/#asterisk ThomasLocke (~ThomasLoc@pdpc/supporter/active/thomaslocke) |
06:13.26 | iprouteth0 | I love my android |
06:13.31 | drmessano | I don't know a single person that fits the "Apple snob" stereotype. Everyone I know with an Apple device simply wants a phone that doesn't need to be reset routinely or returned after a few months |
06:13.42 | iprouteth0 | cant say I'd want to support end users with them |
06:13.54 | *** join/#asterisk mnathani (~mnathani@198-84-231-11.cpe.teksavvy.com) |
06:14.07 | jeev | drmessano, you dont live in L.A. |
06:14.18 | drmessano | I don't care |
06:14.19 | jeev | drmessano, red state? |
06:14.42 | iprouteth0 | I've always jailbroken iphones anyway |
06:14.53 | iprouteth0 | so I figure why not use android. I dont regret the switch |
06:15.21 | iprouteth0 | my bro won't give up his iphone though. Other brother, galaxy s3 |
06:16.02 | drmessano | My wife wants a tablet.. and she is hesitant to spend the money on an iPad. I am probably going to give her mine and buy a new one just to spare us the misery |
06:16.04 | jeev | i dunno y0, im sleepy |
06:16.19 | jeev | drmessypants, so.. you're gonna get a new ipad.. |
06:16.35 | drmessano | Maybe |
06:16.53 | iprouteth0 | i'm too broke for things like that :( |
06:17.57 | iprouteth0 | Dont even have cell service active on my phone.... I use google voice and the over abundant wifi aroud me |
06:18.24 | jeev | ah crap |
06:18.28 | drmessano | I'd love to be wifi-only. |
06:18.42 | jeev | i'm gonna listen to the police scanner to see wtf is going on at MIT and lseep |
06:18.43 | jeev | sleep |
06:18.43 | jeev | night |
06:18.48 | iprouteth0 | doesnt cost me anything |
06:19.07 | iprouteth0 | but it can be inconvenitn |
06:19.11 | iprouteth0 | sometimes |
06:19.26 | iprouteth0 | i plan on activating it with ting |
06:19.41 | iprouteth0 | very cost effective carrier |
06:19.50 | drmessano | I've always seen them in passing |
06:19.55 | drmessano | Never researched much |
06:20.33 | iprouteth0 | since I use wifi and google voice for the bulk of my calls already I wouldnt need much in the way of minutes |
06:21.27 | drmessano | I use Google Voice for work. Nothing like having my calls going to 4 places |
06:21.35 | drmessano | Its a lifesaver |
06:22.02 | iprouteth0 | I just use chan motif and my asterisk server |
06:22.15 | joako | I have my cell phone setup so if it´s turned off it forwards to my car phone, home & office and then rolls back to my AT&T voicemail |
06:23.33 | drmessano | I have calls going to my mobile number, my desk phone at work, my BRIA extension on my cell (when I am at work), and then chan_motif on my personal Asterisk box for my home phones. |
06:23.49 | drmessano | So when people say they called and couldnt reach me, they are damn liars |
06:24.35 | iprouteth0 | well i've got to get some sleep. Night all |
06:24.43 | drmessano | Take care |
06:36.23 | *** join/#asterisk bulkorok (~chatzilla@85.183.36.36) |
06:38.41 | *** join/#asterisk dxrt (~dxrt@unaffiliated/dxrt) |
06:38.51 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
06:40.05 | *** join/#asterisk amizraa (~amizraa@gateway/tor-sasl/amizraa) |
06:40.11 | *** join/#asterisk troyt (~troyt@2001:1938:240:2000::3) |
06:47.28 | *** join/#asterisk bpriddy (~bpriddy@ipv4.host.stabbyspazzout.net) |
06:47.31 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.33) |
06:49.29 | *** join/#asterisk santa0536 (~santa@cn-bgp-nat.portaone.com) |
07:17.03 | *** join/#asterisk k610 (~K610@cred.epid.ucl.ac.be) |
07:23.22 | *** join/#asterisk Bradada (~Bradada@59-120-137-34.HINET-IP.hinet.net) |
07:24.19 | *** join/#asterisk Faustov (user@gentoo/user/faustov) |
07:26.04 | *** join/#asterisk ujjain (ujjain@unaffiliated/ujjain) |
07:30.41 | *** join/#asterisk vfabi (~fabi@host-static-93-116-255-140.moldtelecom.md) |
07:38.35 | *** join/#asterisk threesome (~threesome@ip-94-113-12-74.net.upcbroadband.cz) |
07:45.03 | *** join/#asterisk arnotixe (~Thunderbi@190.130.243.195) |
07:45.13 | *** join/#asterisk mirela666 (~Thunderbi@212.200.146.253) |
07:50.12 | *** join/#asterisk areski (~areski@80.174.128.97.dyn.user.ono.com) |
07:54.31 | *** join/#asterisk kayfox (~kayfox@xheotris.zerda.net) |
08:33.57 | *** join/#asterisk vlad_starkov (~vlad_star@195.68.167.197) |
08:39.03 | *** join/#asterisk vlad_starkov (~vlad_star@91.206.59.135) |
08:51.04 | *** join/#asterisk racho (~racho@46.40.123.204) |
09:01.00 | *** join/#asterisk youjelly (~youjelly@39.47.144.196) |
09:10.46 | *** join/#asterisk af_ (~getsmart@88-149-224-126.v4.ngi.it) |
09:20.54 | *** join/#asterisk Bradada (~Bradada@59-120-137-34.HINET-IP.hinet.net) |
09:30.17 | *** join/#asterisk danfromuk (~IceChat77@unaffiliated/danfromuk) |
09:30.55 | danfromuk | Hi, is there a list of sound files required for queue position annoucements that I can copy and paste to a voice artist? |
09:33.01 | *** join/#asterisk vlad_sta_ (~vlad_star@195.68.167.197) |
09:33.59 | *** join/#asterisk vlad_sta_ (~vlad_star@91.206.59.136) |
09:34.52 | *** join/#asterisk af_ (~getsmart@88-149-224-126.v4.ngi.it) |
09:41.48 | kaldemar | danfromuk: wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-core-sounds-en-g729-current.tar.gz ; tar xzvf asterisk-core-sounds-en-g729-current.tar.gz ; grep "vm-" core-sounds-en.txt | less |
09:42.48 | kaldemar | oops, don't grep "vm-" those are the voicemail prompts. anyway, you'll find all the prompts in text for in the .txt file. |
09:45.28 | mirela666 | danfromuk: Ic queues.conf you can find list of announcments and set your own |
09:45.36 | mirela666 | In* |
09:46.07 | mirela666 | danfromuk: if you installed samples |
09:46.50 | mirela666 | danfromuk: ; ("You are now first in line.") |
09:46.50 | mirela666 | ;queue-youarenext = queue-youarenext |
09:51.59 | *** join/#asterisk c0rnoTa (~c0rnoTa@78.24.154.190) |
09:52.02 | *** part/#asterisk c0rnoTa (~c0rnoTa@78.24.154.190) |
09:53.56 | *** join/#asterisk hebber (~hebber@node-14pg.pool-125-25.dynamic.totbb.net) |
09:59.15 | *** join/#asterisk amessina (~amessina@2001:470:c1dc:7779:d6be:d9ff:fe8d:7c1e) |
10:05.18 | *** join/#asterisk cusco (~tralala@2001:41d0:1:6caf::1) |
10:05.28 | cusco | hi |
10:06.29 | *** join/#asterisk amessina (~amessina@2001:470:c1dc:7779:d6be:d9ff:fe8d:7c1e) |
10:12.21 | *** join/#asterisk nantou (~phonetic@gateway/tor-sasl/martinphone) |
10:17.18 | *** join/#asterisk paolo_ (~smuxi@ip-176-198-132-85.unitymediagroup.de) |
10:19.40 | *** join/#asterisk WIMPy (~wimpy@e183095026.adsl.alicedsl.de) |
10:21.50 | *** join/#asterisk vlad_starkov (~vlad_star@91.206.59.137) |
10:29.08 | *** join/#asterisk deo (~deo@203.177.214.75) |
10:34.14 | *** join/#asterisk vlad_sta_ (~vlad_star@195.68.167.197) |
10:37.26 | *** join/#asterisk evilsk4ter (~evilsk4te@187.60.66.11) |
10:46.57 | *** join/#asterisk taylorbyte2013 (~cyberninj@49.176.104.233) |
11:05.47 | *** join/#asterisk vlad_starkov (~vlad_star@91.206.59.138) |
11:13.44 | *** join/#asterisk seik0 (5f34ecf8@gateway/web/freenode/ip.95.52.236.248) |
11:15.08 | seik0 | Hi, everyone. If I using Static Realtime for extensions.conf, how should i create entry to define that "my_context" exists without adding any "include" or "exten" (or anyting else) ? |
11:15.50 | seik0 | more definitely, what should be the values for "val_name" and "var_val" ? |
11:19.12 | seik0 | ok, in fact, there is no point in such definition, so you may not answer |
11:22.25 | *** join/#asterisk Maliuta (nikolai@donetsk.lusan.id.au) |
11:32.02 | *** join/#asterisk FiReSTaRT (~dlyh@unaffiliated/firestart) |
11:33.26 | *** join/#asterisk vfabi (~fabi@host-static-93-116-255-140.moldtelecom.md) |
11:44.15 | *** join/#asterisk taylorbyte2013 (~cyberninj@49.176.104.233) |
11:46.31 | *** join/#asterisk italorossi (~italoross@187.60.66.11) |
11:46.50 | *** join/#asterisk vlad_sta_ (~vlad_star@195.68.167.197) |
12:01.09 | *** join/#asterisk bulkorok (~chatzilla@85.183.36.36) |
12:04.01 | *** join/#asterisk MarKsaitis (~MarKsaiti@81.101.81.114) |
12:04.40 | Faustov | ~book |
12:04.40 | infobot | Asterisk: The Definitive Guide, 3rd Edition (ISBN 0-596-51734-3) available at http://oreilly.com/catalog/9780596517342 - Asterisk: The Definitive Guide is released under a Creative Commons License (http://creativecommons.org/licenses/by-nc-nd/3.0/us/) and is available for reading online at http://www.asteriskdocs.org/ or see ~buybook |
12:26.11 | *** join/#asterisk keycruncher (~Adium@c-174-55-112-94.hsd1.pa.comcast.net) |
12:30.58 | *** join/#asterisk coppice (~chatzilla@123203240234.ctinets.com) |
12:31.22 | *** join/#asterisk FireAndIce (~FireAndIc@203.109.75.67) |
12:32.26 | *** join/#asterisk mjordan (~mjordan@75.76.55.191) |
12:32.27 | *** mode/#asterisk [+o mjordan] by ChanServ |
12:43.13 | *** join/#asterisk mjordan (~mjordan@75.76.55.191) |
12:43.13 | *** mode/#asterisk [+o mjordan] by ChanServ |
12:43.41 | *** join/#asterisk vlad_starkov (~vlad_star@195.68.167.197) |
12:44.01 | *** part/#asterisk mjordan (~mjordan@75.76.55.191) |
12:45.45 | *** join/#asterisk vlad_starkov (~vlad_star@91.206.59.141) |
12:46.40 | *** join/#asterisk protocoldoug (~doug@unaffiliated/protocoldoug) |
12:55.33 | *** join/#asterisk serafie (~erin@nat/digium/x-pkaljykxbuxdrjgs) |
13:07.21 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
13:07.21 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
13:07.43 | *** join/#asterisk blee (~blee@50-89-200-235.res.bhn.net) |
13:09.20 | *** join/#asterisk brad_mssw (~brad@shop.monetra.com) |
13:10.54 | *** join/#asterisk camerin (hoax@newelite2.bshellz.net) |
13:11.13 | paul_andrew | Hello, iif i modify an multiple agi scripts, do i have to restart asterisk or will a reload be enough? |
13:11.21 | *** join/#asterisk Quest (~syncsys@182.180.108.45) |
13:11.23 | Quest | hi |
13:11.26 | *** join/#asterisk malcolmd (~malcolmd@pdpc/sponsor/digium/malcolmd) |
13:11.26 | *** mode/#asterisk [+o malcolmd] by ChanServ |
13:11.58 | Quest | what do most people use for asterisk. i have ubuntu and i can install asterisk. but i heard most people go with debian and use asteriskNOW with it? |
13:12.00 | igcewieling | paul_andrew: you don't have to restart or reload anything when chaning AGIs |
13:12.08 | igcewieling | Qwell: CentOS 6 |
13:12.29 | igcewieling | The answer to your questions USE THE DISTRO YOU ARE MOST FAMILIAR WITH. Asking multiple times won't change the answer. |
13:12.31 | *** join/#asterisk ujjain (ujjain@unaffiliated/ujjain) |
13:12.39 | igcewieling | sorry, not Qwell, that was for Quest |
13:12.51 | Quest | igcewieling, why cento 6? |
13:13.00 | igcewieling | Quest: because it is the distro I am most familiar with. |
13:13.01 | paul_andrew | igcewieling: so asterisk calls the script and whatever its in the agi it will load and run that. |
13:13.13 | igcewieling | paul_andrew: correct. |
13:13.15 | Quest | igcewieling, oh . so thats the only reason |
13:13.17 | Quest | ? |
13:13.22 | igcewieling | Quest: correct. |
13:14.34 | kaldemar | Quest: "go with debian and use asteriskNOW with it" really makes no sense because asterisknow is a linux distro with asterisk and a GUI installed. |
13:14.57 | Quest | igcewieling, my question was in context to asterisk and ease of use, and features that most professionals like. |
13:15.03 | *** join/#asterisk Alagar (~helpdesk@vsusm16.vernalissystems.com) |
13:15.21 | igcewieling | Quest: there is no significant difference between popular distros with regards to Asterisk |
13:15.25 | paul_andrew | igcewieling: I have about 8 scripts that calls a database and now i need to move that database. If the database would be static then this could be done without downtime. hmm |
13:15.40 | Quest | kaldemar, oh. whats the underlying distro of asteriskNOW ? does it has its own distro? |
13:16.07 | igcewieling | You have enough to learn when starting out with Asterisk, using a distro you are not familiar with is just stupid. |
13:16.37 | Quest | igcewieling, kaldemar well the trixbox is not recomended for sure? right? we have it setup. we want to shift to another. its old , buggy, and insecure |
13:16.53 | igcewieling | Quest: trixbox is not a distro |
13:17.04 | kaldemar | Quest: centos. |
13:17.16 | igcewieling | trixbox is a PoS GUI which is poorly maintained |
13:19.59 | Quest | igcewieling, kaldemar trixbox has the underlying distro of centos and has a GUI of freepbx |
13:20.10 | Quest | with asterisk already installed |
13:20.30 | Quest | igcewieling, kaldemar so are we on the right track? |
13:20.31 | igcewieling | Quest: and yet virtually nobody here uses it. |
13:20.48 | Quest | ya. so what i said is correct? its ok to migrate? |
13:21.07 | igcewieling | if you want to use FreePBX then use FreePBX, not some bastardized custom modified FreePBX like Trixbox uses. |
13:21.21 | igcewieling | Quest: migrate what? |
13:21.31 | kaldemar | Quest: trixbox also has a bunch of other stuff as far as i know. |
13:21.38 | Quest | igcewieling, migrate from trixbox to some thing other |
13:22.34 | kaldemar | Quest: freepbx is also distributed as a pre-installed image nowadays. |
13:22.49 | igcewieling | Quest: since I don't know your requirements, setup, or business I can't say. But if you MUST use a GUI then use FreePBX. FreePBX has a large community of users which can help you with issues. |
13:23.12 | tparcina | In extensions.conf, is there any variable that stores current context name? |
13:23.22 | kaldemar | tparcina: CONTEXT |
13:23.29 | Quest | igcewieling, kaldemar first of all i want to confirm that is trixbox so old, outdated, insecure and bugy? second what other app is advised. provided that we want ubuntu to be the base OS |
13:23.34 | igcewieling | tparcina: Yes. Apparently you have not read the documentaiton Try reading the Asterisk book. |
13:23.36 | igcewieling | ~book |
13:23.36 | infobot | Asterisk: The Definitive Guide, 3rd Edition (ISBN 0-596-51734-3) available at http://oreilly.com/catalog/9780596517342 - Asterisk: The Definitive Guide is released under a Creative Commons License (http://creativecommons.org/licenses/by-nc-nd/3.0/us/) and is available for reading online at http://www.asteriskdocs.org/ or see ~buybook |
13:23.40 | tparcina | kaldemar: Thank you. :) |
13:23.41 | Quest | we have 100 phones |
13:24.14 | tparcina | igcewieling: Thank you, I haven't read it yet. |
13:28.32 | *** join/#asterisk amizraa (~amizraa@gateway/tor-sasl/amizraa) |
13:28.48 | *** join/#asterisk ke-esc (~ke-esc@155.229.78.130) |
13:29.22 | *** part/#asterisk tparcina (~tomo@cisco15.fesb.hr) |
13:30.15 | *** join/#asterisk mihamina (~mihamina@41.188.46.121) |
13:32.27 | ke-esc | G'Morning all. I just fronted my Asterisk installation with Kamailio following the tutorial instructions on Kamailio's site (using asterisk realtime tables).. Now I'm having an issue where all phones in asterisk appear to be from the same peer, so things like callerid and voicemail aren't working properly (I use CHANNEL(peername) in a DB lookup to match device to physical user). Any ideas what I should look for to fix this? |
13:37.59 | *** join/#asterisk vlad_sta_ (~vlad_star@91.206.59.142) |
13:38.37 | *** join/#asterisk FleshMissile (~FleshMiss@87.237.70.109) |
13:40.47 | *** join/#asterisk mjordan (~mjordan@nat/digium/x-ammalqovbolhukcy) |
13:40.47 | *** mode/#asterisk [+o mjordan] by ChanServ |
13:42.33 | *** join/#asterisk bombev (~User@PPPoE-Static-40-132.UnicsBG.Net) |
13:58.12 | *** join/#asterisk w9sh (~sph@50-79-224-193-static.hfc.comcastbusiness.net) |
13:58.18 | *** join/#asterisk pabelanger (~pabelange@asterisk/contributor-and-bug-marshal/pabelanger) |
13:58.18 | *** mode/#asterisk [+o pabelanger] by ChanServ |
14:04.23 | *** join/#asterisk putnopvut (~putnopvut@asterisk/master-of-queues/mmichelson) |
14:04.24 | *** mode/#asterisk [+o putnopvut] by ChanServ |
14:06.15 | *** join/#asterisk mirela666 (~Thunderbi@212.200.146.253) |
14:10.58 | Quest | igcewieling, ok. |
14:11.25 | Quest | kaldemar, igcewieling so ubuntu + freepbx + asterisk. is good to go? |
14:11.50 | igcewieling | Quest: Is ubuntu the distro you are most familiar with? |
14:11.56 | Quest | ya |
14:12.03 | igcewieling | then it should work well for you. |
14:12.19 | Quest | so install ubuntu. then install freepbx and then asterisk? |
14:12.20 | igcewieling | just remember once you install freepbx you should ask your questions on #FreePBX since you are not running "real" asterisk |
14:12.22 | Quest | ok.. wonderful |
14:12.36 | igcewieling | Quest: no, install ubuntu, then follow the FreePBX install instructions |
14:12.39 | Quest | igcewieling, not the real asterisk? |
14:12.50 | Quest | ok |
14:13.00 | igcewieling | Quest: correct. Where "real" in this case means "config files you wrote". |
14:13.03 | Quest | is that not the real asterisk that is in freepbx |
14:13.27 | Quest | igcewieling, oh so the freepbx writes the config files of asterisk in its own way? |
14:13.38 | *** join/#asterisk sruffell (~sruffell@asterisk/the-kernel-guy/sruffell) |
14:13.38 | *** mode/#asterisk [+o sruffell] by ChanServ |
14:13.48 | igcewieling | Quest: Adding FreePBX is like building a custom car out of standard parts. You can't bring your car to the dealership and expect help. Same goes for FreePBX and Asterisk |
14:14.00 | Quest | igcewieling, i hope it wont be a problem if I later on try to change some configs by consol . it wont cause a problem with freepbx GUI? |
14:14.18 | Quest | igcewieling, i see |
14:14.24 | igcewieling | Quest: if you make the changes in a way compatible with FreePBX, then it is not a problem. |
14:14.45 | igcewieling | for example if you make changes to extensions.conf they will be lost the next time you make a change in the FreePBX GUI |
14:14.45 | Quest | well i wont be knowing weather its compatible or not. untill i crash :) |
14:14.53 | Quest | i see |
14:15.20 | igcewieling | so you MUST make your changes in a way compatible with FreePBX |
14:15.57 | igcewieling | same applies for sip.conf and virtually every other standard Asterisk config file. |
14:17.22 | *** join/#asterisk alhemicar (~alhemicar@178.77.7.31) |
14:18.38 | Quest | hm |
14:18.44 | Quest | great help. igcewieling thanks |
14:19.02 | Quest | igcewieling, i guess most seniors use non-GUI asterisk |
14:19.12 | Quest | we have 100 phones and want quick setup |
14:19.19 | Quest | and we are not experts |
14:27.18 | *** join/#asterisk [TK]D-Fender (~chatzilla@64.235.216.2) |
14:28.10 | igcewieling | We use FreePBX for client Asterisk boxes so our operations and support people can do adds/moves/changes and so the customer can do so as well. We do NOT use FreePBX on our core call router boxes |
14:30.35 | FleshMissile | Is there a way to use a delay in extensions.conf that will wait 60 seconds before doing the next line, but without stopping the call like wait(60) does? Basically I am trying to get PauseMonitor to auto resume after 60 seconds |
14:32.14 | FleshMissile | an example http://pastebin.com/0qTagj8V |
14:33.55 | igcewieling | FleshMissile: no. |
14:34.22 | igcewieling | you should use AMI for Async stuff in Asterisk |
14:34.41 | FleshMissile | Ah okay, what's AMI? |
14:34.56 | FleshMissile | Newbie here :) |
14:35.12 | igcewieling | Asterisk Manager Interface |
14:35.23 | igcewieling | FleshMissile: you should read The Book |
14:35.24 | igcewieling | ~book |
14:35.24 | infobot | Asterisk: The Definitive Guide, 3rd Edition (ISBN 0-596-51734-3) available at http://oreilly.com/catalog/9780596517342 - Asterisk: The Definitive Guide is released under a Creative Commons License (http://creativecommons.org/licenses/by-nc-nd/3.0/us/) and is available for reading online at http://www.asteriskdocs.org/ or see ~buybook |
14:36.01 | FleshMissile | Excellent, thanks |
14:39.42 | *** join/#asterisk ChkDigit (~u388mw@74.3.144.66) |
14:41.01 | Quest | igcewieling, thanks!!!!!!!! |
14:42.27 | *** join/#asterisk TimeRider (~steve@2.222.174.4) |
14:46.39 | *** join/#asterisk [TK]D-Fender (~chatzilla@64.235.216.2) |
14:49.36 | *** join/#asterisk SuPrSluG (~SuPrSluG@rrcs-50-75-185-122.nys.biz.rr.com) |
14:55.21 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
14:59.20 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.126.179) |
15:04.27 | *** join/#asterisk ipiera (~Paul@ipiera.plus.com) |
15:09.45 | *** join/#asterisk anthm (~anthm@freeswitch/developer/anthm) |
15:10.32 | *** join/#asterisk navaismo (~navaismo@189.191.250.167) |
15:11.11 | *** join/#asterisk pa (~pa@unaffiliated/pa) |
15:11.11 | *** join/#asterisk dxd828 (~dxd828@195.191.107.205) |
15:11.56 | *** join/#asterisk lauris (~la@unaffiliated/lauris) |
15:13.00 | *** join/#asterisk RadJackson (~RadJackso@fktel.cust.jaguar-network.net) |
15:14.06 | RadJackson | Hello everyone , i would like to know if it is possible to leave a message directly in a voicemail without making the phone ring |
15:14.20 | igcewieling | RadJackson: yes |
15:14.36 | jmetro | voicemail(box@context) RTFM? |
15:14.43 | igcewieling | Your question makes me think you are using an Asterisk GUI |
15:15.24 | lauris | hi |
15:15.46 | *** join/#asterisk Tim_Toady (~fuzzy@194.50.55.245) |
15:15.58 | RadJackson | igcewieling i am using asterisk |
15:16.34 | igcewieling | RadJackson: then all you need to do is exten => 123,1,Voicemail(123@default) (or whatever extension and context you are using) |
15:16.43 | lauris | is it possible to store queue_log in a mysql without using res_odbc or any 3rd party importer in asterisk 11 ? |
15:18.05 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
15:24.07 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
15:24.15 | *** join/#asterisk nantou (~phonetic@gateway/tor-sasl/martinphone) |
15:31.11 | jodie | speaking of GUI.. I just installed asterisk.. I'm in the browser and prompted/asked for user name and password.. What / Who do I use. |
15:31.55 | jmetro | depends on what gui you installed. asterisk itself doesnt have one |
15:32.07 | jmetro | id google [name of gui] default password |
15:32.15 | *** join/#asterisk aidinb (~aidin@unaffiliated/aidinb) |
15:32.46 | jodie | I did the asteriskNOW CentOS iso from the download site |
15:34.06 | *** join/#asterisk Gaiax (bef280c5@gateway/web/freenode/ip.190.242.128.197) |
15:34.58 | navaismo | with FreePBX or Asterisk GUI, anyway in the process you should set the credentiels if not try the basic admin:admin |
15:36.34 | igcewieling | with FreePBX the default user/password info is at the end of the INSTALL file, which is included in the tarball |
15:37.08 | jodie | super.. Thank you. |
15:37.30 | *** join/#asterisk SuPrSluG (~SuPrSluG@rrcs-50-75-185-122.nys.biz.rr.com) |
15:41.14 | malcolmd | jodie: admin / admin |
15:41.41 | malcolmd | https://wiki.asterisk.org/wiki/display/AST/Installing+AsteriskNOW |
15:42.31 | jmetro | ew centos? |
15:43.09 | malcolmd | no distro wars plz :D |
15:43.46 | drmessano | The only kind of people that run CentOS are the kind of people that run CentOS. There. Said it. |
15:43.54 | drmessano | Come at me, bro |
15:44.03 | jmetro | Oh snap, drmessano with the big guns. |
15:44.13 | leifmadsen | drmessano: oh man I was gonna say something gross |
15:44.23 | drmessano | HAH |
15:44.46 | leifmadsen | I think my point has been made |
15:45.08 | drmessano | Badump-ching! |
15:47.05 | *** join/#asterisk rgsteele (~chatzilla@12.150.6.65) |
15:47.16 | jodie | Off the subject of distros.. Any options out there as to which Softphone client/software for asterisk? |
15:47.32 | leifmadsen | I like jitsi |
15:47.33 | drmessano | What platform? |
15:47.40 | leifmadsen | which is all platforms |
15:47.47 | leifmadsen | and works well with confbridge video |
15:47.52 | drmessano | Not iOS :) |
15:47.55 | jodie | It mixed .. Windows and Ubuntu |
15:48.06 | rgsteele | So, I've been trying to figure out the best approach for having moh while dialing a list of extensions. I have a Mobotix device that will ring several extensions in succession, so I'd like some moh in case the first person (or first few) don't answer. |
15:48.28 | rgsteele | But, using the 'm' option for Dial() doesn't seem like it'd be good, cuz it'd start over every time I dialed the next extension in the list |
15:48.47 | drmessano | Jitsi is pretty sweet |
15:48.51 | rgsteele | Perhaps I should just use a queue... |
15:48.53 | igcewieling | rgsteele: you may be able to use chan_local to do what you want |
15:49.24 | igcewieling | not sure what would happen when dialing a Local/ channel with "m" and the actual Dial of the device not using "m" |
15:50.52 | rgsteele | I'm thinking that using a queue with the linear strategy and static members might be easier |
15:51.58 | jmetro | code your own queue |
15:55.11 | *** join/#asterisk vinhdizzo (~vinh@cpe-66-74-182-202.socal.res.rr.com) |
16:01.29 | *** join/#asterisk amizraa (~amizraa@gateway/tor-sasl/amizraa) |
16:02.33 | *** join/#asterisk generalhan (~generalha@about/windows/staff/generalhan) |
16:09.11 | *** part/#asterisk alhemicar (~alhemicar@178.77.7.31) |
16:12.19 | *** join/#asterisk _mnathani_ (~mnathani@198-84-231-11.cpe.teksavvy.com) |
16:12.42 | *** join/#asterisk keycruncher (~Adium@c-174-55-112-94.hsd1.pa.comcast.net) |
16:18.57 | *** join/#asterisk serafie (~erin@user-24-214-173-250.knology.net) |
16:20.05 | *** join/#asterisk k610 (~K610@wifi-secure2-150.sri.ucl.ac.be) |
16:26.35 | *** join/#asterisk af_ (~getsmart@88-149-224-126.v4.ngi.it) |
16:26.41 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.126.179) |
16:28.39 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.126.179) |
16:44.06 | *** join/#asterisk robert_ (~hellspawn@objectx/robert) |
16:50.21 | igcewieling | Am I evil to laugh at this? "Per the LEC (local phone company) the Area and site have no power. Billing customer for the LEC dispatching out." |
16:53.42 | *** join/#asterisk bdfoster (~bdfoster@unaffiliated/bdfoster) |
16:55.45 | navaismo | running the command--> cdr show pgsql status return the usage of the command -->Usage: cdr show pgsql status |
16:56.26 | navaismo | which is the same, is the normal behavior, i'm expecting a similar output of running cdr mysql status |
16:56.45 | igcewieling | navaismo: Asterisk 10 or 11? |
16:56.55 | navaismo | 1.3.0 |
16:57.04 | igcewieling | try again. |
16:57.08 | navaismo | s/1.3.0/11.3.0/ |
16:58.28 | igcewieling | I seem to recall reading somewhere recently that some of the tab completion stuff was not corrected for changes in syntax. Though it was with core set debug, not cdr. might want to try a couple of different combos like cdr pgsql show status or similar |
17:01.59 | navaismo | any change give a: n such command |
17:04.07 | *** join/#asterisk Defraz (~Defraz@24-116-129-18.cpe.cableone.net) |
17:08.19 | *** join/#asterisk derjanni (~jan@ip-178-202-27-28.unitymediagroup.de) |
17:09.19 | leifmadsen | core show help cdr show |
17:09.24 | leifmadsen | that'll give you the commands |
17:09.58 | *** join/#asterisk leedm777 (~leedm777@nat/digium/x-sshbukrzizjpdpfz) |
17:12.16 | navaismo | hmm i guess this is and endless loop, core show help cdr show reuslt in: cdr show pgsql status & cdr show status. Running cdr show pgsql status result in: Usage: cdr show pgsql status Shows current connection status for cdr_pgsql |
17:12.53 | leifmadsen | entirely possible it just never got updating |
17:12.55 | leifmadsen | updated* |
17:13.07 | leifmadsen | most people just use odbc for database connections as that's the recommended method |
17:13.10 | leifmadsen | so cdr_odbc etc |
17:13.20 | leifmadsen | well, cdr_adaptive_odbc |
17:14.15 | navaismo | my laziness tell me to use the native mysql(deprecated) & postresql module. Well not big deal that command still writting to the psql DB |
17:17.00 | navaismo | thanks anyway |
17:19.46 | leifmadsen | lazy? sounds like a lot more work and effort in debugging and frustration to me |
17:19.50 | leifmadsen | and the odbc methods are well documented |
17:21.47 | jmetro | odbc is good. |
17:22.48 | *** join/#asterisk iprouteth0 (~james@unaffiliated/iprouteth0) |
17:26.01 | navaismo | never used |
17:26.45 | *** join/#asterisk Dovid (~Dovid@static-173-63-105-210.nwrknj.fios.verizon.net) |
17:27.15 | navaismo | ill give at try later |
17:30.07 | igcewieling | navaismo: the difficult part is getting all the system ODBC stuff working if you are not already familiar with it. |
17:30.49 | igcewieling | I find the fact you can specify the database password in both the asterisk side and the odbc side to be confusing. |
17:32.09 | navaismo | ok, another point to stay with mysql |
17:32.26 | drmessano | ODBC is the way to go |
17:34.09 | igcewieling | we use ODBC on our core systems and cdr_mysql on our FreePBX boxes. |
17:34.39 | navaismo | i use cdr_mysql always, but need to check out that odbc stuff |
17:36.35 | Nugget | ODBC is the way to go :) |
17:37.05 | igcewieling | fyi, for anyone who wants to use SRV for Dial, here is an AEL script for you http://pastebin.ca/2362142 code needs some cleanup, but it works for us |
17:38.11 | leifmadsen | native mysql stuff has way more points against it than for it |
17:38.37 | igcewieling | leifmadsen: such as easier to setup, more community documentation, and likely being faster? |
17:38.45 | igcewieling | 8-| |
17:39.04 | leifmadsen | none of those things are true |
17:39.29 | igcewieling | I admit the last may not be true, but I disagree with on the others |
17:39.44 | leifmadsen | I disagree with your disagreement, there is significant amounts of ODBC documentation |
17:39.46 | leifmadsen | I know because I wrote it |
17:40.00 | leifmadsen | there is a whole chapter just on DB integration in the asterisk book |
17:40.18 | igcewieling | I know, that is where I learned how to set it up. 8-) |
17:40.45 | igcewieling | also I would not call your documentation "community documentation". |
17:40.56 | leifmadsen | I've taken many clients from native mysql stuff to odbc integration, and the number of crashes was nearly reduced to zero |
17:41.01 | leifmadsen | igcewieling: how so? |
17:41.10 | leifmadsen | community members wrote it |
17:41.15 | leifmadsen | and is freely availably |
17:41.18 | leifmadsen | available* |
17:41.20 | igcewieling | leifmadsen: I'd call the book "authortative docs" |
17:41.20 | leifmadsen | not sure what else you want |
17:41.37 | igcewieling | as close to official documentation as you are likely to get. |
17:42.04 | leifmadsen | not really, just the most well known and used |
17:42.12 | leifmadsen | official documentation would be that generated from the source |
17:42.14 | leifmadsen | and on the asterisk wiki |
17:43.49 | igcewieling | leifmadsen: it just seems to me that calling the stuff you write "community documentation" is like calling the Hope Diamond a "pretty stone". 8-) |
17:44.04 | leifmadsen | I think our application of the terms differes |
17:44.34 | leifmadsen | just because it is the most widely read documentation doesn't make it authoritative |
17:47.27 | igcewieling | I was thinging of mailing list and voip-info and blog posts, etc. |
17:48.21 | Quest | igcewieling, kaldemar it seems that installing and configuring freebpx is very easy but maintenance and further customization is difficult. where as installing only asterisk is difficult to configure as well difficult to maintain as well. |
17:48.43 | igcewieling | Quest: Welcome to the world of PBXs |
17:48.48 | Quest | :) |
17:48.52 | *** part/#asterisk ipiera (~Paul@ipiera.plus.com) |
17:49.09 | igcewieling | be glad you don't have to configure the PBX via DTMF on a phone like some legacy PBXs |
17:49.20 | Quest | hm |
17:49.56 | navaismo | let me say the choose of mysql or psql or odbc its like choosing the distro, all works there are some flavors to choose |
17:49.58 | igcewieling | for a long time using a dumb terninal to configure a pbx was a "premium feature" I'm thinking of some nortel boxes. |
17:50.13 | *** join/#asterisk italorossi (~italoross@187.60.66.11) |
17:53.18 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.124) |
17:54.10 | leifmadsen | if they were all equally maintained then I might tend to agree with the analogy |
17:54.51 | leifmadsen | it's like choosing between ubuntu, whitebox, and fedora core 3 |
17:56.33 | jmetro | qwell: I woudlnt consider vanilla asterisk to be difficult if you read the book. |
17:57.35 | navaismo | since i don't have issues with the mysql module yet. I since 1.6 to 11.3.0 I preffer to use it since congure it the odbc |
17:58.11 | navaismo | but i need to take a chance to odbc |
18:03.29 | *** join/#asterisk ujjain2 (~ujjain@unaffiliated/ujjain) |
18:04.38 | *** join/#asterisk MrMeek (~meekhime@172-4-223-5.lightspeed.toldoh.sbcglobal.net) |
18:12.25 | *** join/#asterisk nantou (~phonetic@gateway/tor-sasl/martinphone) |
18:19.34 | iprouteth0 | i'd love to figure out why my sip/tls was failing on a non standard port. Guess I'll just have to watch for attacks on 5061 though I doubt the are as prevalent as on 5060 |
18:20.01 | iprouteth0 | somewhere in the call trace it tries going back to 5061 when on a nonstandard port |
18:28.48 | *** join/#asterisk Invader (~Invader@unaffiliated/invader) |
18:29.31 | *** join/#asterisk Invader (~Invader@unaffiliated/invader) |
18:53.51 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.127.95) |
18:54.13 | *** join/#asterisk Changos (~Changos@unaffiliated/changos) |
18:56.58 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
18:57.17 | iprouteth0 | leifmadsen: can you update the asterisk book regarding chan_motif and xmpp? I've worked with Malcolm to get the wiki updated regarding the priority setting |
18:57.41 | leifmadsen | whatever is in the 4th edition is what will be published |
18:58.09 | leifmadsen | which is available on ofps.oreilly.com |
18:58.16 | leifmadsen | asteriskdocs.org is the 3rd edition |
18:58.45 | iprouteth0 | I've been looking at the 3rd ed I think |
18:59.04 | leifmadsen | chan_motif would not exist in that edition |
18:59.07 | leifmadsen | since it is asterisk 1.8 based |
18:59.24 | leifmadsen | 4th edition includes chan_motif stuff since it is Asterisk 11 based |
19:00.11 | iprouteth0 | is there a free link for an online edition of the 4th ed book? |
19:00.21 | leifmadsen | already given above in this conversation |
19:00.44 | leifmadsen | 4th edition isn't published yet |
19:01.08 | iprouteth0 | think I may have found one |
19:01.20 | leifmadsen | <leifmadsen> which is available on ofps.oreilly.com |
19:01.30 | leifmadsen | not sure what else you "found" |
19:04.19 | iprouteth0 | hmmm this could be 3rd ed |
19:04.21 | iprouteth0 | http://ofps.oreilly.com/titles/9781449332426/index.html |
19:04.39 | leifmadsen | nope |
19:04.43 | leifmadsen | 4th edition |
19:04.59 | iprouteth0 | I see that now.... was looking through the versioning section |
19:05.12 | iprouteth0 | not sure where to find the motif section though |
19:05.33 | leifmadsen | External Services |
19:07.59 | iprouteth0 | this is the verbage I have issue with |
19:08.00 | iprouteth0 | priorityDefines the priority of this resource in relation to other resources. The lower the number, the higher the priority. |
19:09.33 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
19:11.16 | jmetro | iprouteth0: priority 0 is higher than priority 10? |
19:13.01 | iprouteth0 | no, thats just it |
19:15.30 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
19:16.39 | iprouteth0 | the higher the numeric value, the higher the priority |
19:18.44 | iprouteth0 | max is 127. Gmail chat client uses 20 so if your xmpp client in asterisk is set to 1, gmail chat client will get the call instead. not an issue if it's a dedicated google voice account |
19:18.47 | iprouteth0 | but mine is not |
19:18.52 | *** join/#asterisk kresp0 (~kresp0@81.61.199.176.dyn.user.ono.com) |
19:19.23 | iprouteth0 | android gtalk and windows gtalk uses value of 24 if memory serves |
19:19.29 | drmessano | Thats correct |
19:20.39 | iprouteth0 | I felt it was worthwhile to have malcolm update the wiki. Hopefully leif can work with the publisher to update the online portion.... Not sure of course where they would be at in the printing or proofing process for physical copies of asterisk: definitive guide |
19:20.39 | drmessano | FWIW, the default in FreePBX has been changed to 127. I made the arguement that since this is a phone system, and we want PHONE CALLS to arrive successfully, we should use the highest value available.. |
19:21.08 | drmessano | So the use of 127 is making its rounds |
19:21.25 | iprouteth0 | thats good to know. I sent the dev of the google voice module for freepbx that priority needs to be an adjustable value in the module, but he already had it in place |
19:21.32 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
19:21.44 | drmessano | Yeah, that came from our convo |
19:22.30 | iprouteth0 | getting the priority setting correct solved a big headache for me |
19:22.33 | drmessano | I sent him the info a week or so ago, and we discussed not only having 127 as the default, but allowing something lower in case someone had multiple systems and wanted to play with priority, or for SOME WEIRD ASS REASON wanted their other clients to get the calls before Asterisk |
19:23.09 | iprouteth0 | it's reassuring to know that others in the community are working to update things like this :) |
19:23.23 | iprouteth0 | love the open source communities! |
19:23.35 | drmessano | I don't consider myself a contributor so much as a nag to have shit correct |
19:23.40 | drmessano | :) |
19:23.44 | iprouteth0 | lol |
19:25.27 | drmessano | The priority thing seems like relatively new information.. or a discovery that hadn't made its way around much. It absolutely explains the "bad behavior" when you're running Pidgin on Linux with Audio/Video enabled and a call comes in, or when you have gmail left open somewhere and your calls stop working |
19:25.54 | drmessano | I'm really kinda surprised this didn't come up in what.. 2010? |
19:26.53 | iprouteth0 | I found it on simonics.com's blog page regarding his google voice gateway service |
19:27.04 | iprouteth0 | a few months ago perhaps |
19:27.11 | drmessano | I can only ration that someone randomly started digging into the XMPP priorities and discovered that Google was using this as a basis for call priority as well |
19:27.22 | drmessano | IDK |
19:27.30 | iprouteth0 | wrote a blog post about it that got into the mailing lists so I know others have noticed the trouble and adjusted their configuration |
19:27.38 | drmessano | Sweet |
19:27.55 | iprouteth0 | simonics.com is using yate, but priority still applies of course since it's an XMPP function |
19:28.08 | drmessano | Start a domain.. GV127.com "Put an end to silence" |
19:28.13 | iprouteth0 | lol |
19:28.46 | *** join/#asterisk TimeRider (~steve@90.213.18.65) |
19:29.15 | iprouteth0 | definitely think I should follow up with the dev who ported ast 11 to openwrt though |
19:29.17 | iprouteth0 | root@OpenWrt:~# free |
19:29.17 | iprouteth0 | <PROTECTED> |
19:29.17 | iprouteth0 | Mem: 61464 59700 1764 0 8336 |
19:29.17 | iprouteth0 | -/+ buffers: 51364 10100 |
19:29.17 | iprouteth0 | Swap: 0 0 0 |
19:30.47 | *** join/#asterisk kareena (~kareena@unaffiliated/kareena) |
19:30.49 | kareena | hi |
19:30.55 | kareena | i want to install the g729 codec but i don't know witch file i have to download http://asterisk.hosting.lv/? |
19:31.04 | iprouteth0 | I think if compiled with low mem might be a good thing to look into |
19:31.20 | iprouteth0 | you have to buy a liscense for g729 |
19:32.19 | kareena | those files are not free http://asterisk.hosting.lv/ ? |
19:32.37 | drmessano | No, thats like bootleg |
19:33.03 | navaismo | PASTEBIN |
19:33.43 | MrMeek | Anyone know if * v1.6 suffers from the old timing issues that require a dahdi_timer ? |
19:34.07 | MrMeek | leif recently told me this is a non-issue in the newer versions of asterisk, but i have no idea about what versions it became a non-issue |
19:35.36 | iprouteth0 | when you buy the liscense you should get a link for digium for the file you need |
19:35.37 | jmetro | upgrade to 11, then you can be sure. |
19:36.04 | iprouteth0 | I would get off of v1.6 also... I would want to at least be running 1.8 if not asterisk 11 |
19:36.24 | iprouteth0 | I havent run 1.6 since 2010 probably |
19:36.36 | MrMeek | I'm incomplete agreement but unfortunately these are telemarketers running vicidial (1.4) or osdial (1.6) so i have no choice but to deal with the legacy |
19:37.18 | iprouteth0 | yeah, sometimes those limitations can be painful |
19:37.22 | MrMeek | very |
19:37.24 | *** join/#asterisk Linkforsoad (~Linkforso@2001:1af8:fec1:0:9464:c17b:82da:8a95) |
19:37.29 | leifmadsen | MrMeek: only certain applications require a timer |
19:37.32 | iprouteth0 | I would look into versions of vicidial for 1.8... |
19:37.36 | leifmadsen | that has been the case since prior to 1.4 |
19:37.44 | MrMeek | ah, like meetme for instance |
19:37.47 | MrMeek | which i'm certain does |
19:37.48 | leifmadsen | exactly |
19:37.49 | iprouteth0 | conference bridges require timers if I'm not mistaken |
19:37.50 | leifmadsen | and that is still the case |
19:38.07 | leifmadsen | meetme requires dahdi timing, but confbridge can use other methods of timing |
19:38.31 | iprouteth0 | leifmadsen: Love that you are a treasure trove of asterisk info :) |
19:38.34 | MrMeek | I'm hoping that someday i have the time to fork the source and port the core to *11 and confbridge (or whichever conferencing app is more appropriate) |
19:38.54 | MrMeek | but.. that's a long way off atm |
19:39.32 | MrMeek | thanks for the input as always |
19:39.37 | *** join/#asterisk derjanni (~derjanni@ip-178-202-27-28.unitymediagroup.de) |
19:39.40 | derjanni | Good evening. |
19:39.49 | derjanni | im really getting frustrated trying to play a file with Background |
19:40.04 | derjanni | it works perfectly with Mp3 player, but I cant get it to convert to GSM for Background |
19:40.11 | jmetro | file convert it |
19:40.26 | derjanni | I read tons of articles about it, but it seems they all use a non existing option in sox -w |
19:41.09 | jmetro | what about through asterisk |
19:41.37 | rgsteele | igcewieling: queue worked perfectly |
19:41.48 | rgsteele | simplicity ftw |
19:42.08 | rgsteele | and now, time to go enjoy the weekend. |
19:46.10 | derjanni | phone calls are so cheap why do people want to break into my box? |
19:47.24 | jmetro | calls from china to israel probably expensive |
19:47.43 | derjanni | didnt know chinese are allowed to call to israel |
19:50.30 | derjanni | treid to convert with asterisk no chance |
19:51.29 | derjanni | need mp3 to alaw |
19:51.48 | leifmadsen | convert mp3 to wav, then use the file convert method in the asterisk cli |
19:52.07 | leifmadsen | if you're using sox >= 14 then the docs on the asteriskdocs.org site should work |
19:52.24 | *** join/#asterisk vinhdizzo (~vinh@cpe-66-74-182-202.socal.res.rr.com) |
19:52.38 | *** join/#asterisk ForresGeek (~lee@host217-39-73-188.range217-39.btcentralplus.com) |
19:53.19 | leifmadsen | I think -w is just -2 now or osmething |
19:54.10 | *** join/#asterisk bdfoster (~bdfoster@unaffiliated/bdfoster) |
19:54.14 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
19:54.16 | derjanni | [Apr 19 19:53:08] WARNING[6686]: file.c:1019 ast_readfile: Unable to open /etc/asterisk/sound/menu.wav -- Remote UNIX connection disconnected |
19:54.36 | derjanni | its all asterisk:asterisk |
19:55.22 | jmetro | show us this result |
19:55.26 | jmetro | ls /etc/asterisk/sound/ |
19:56.12 | derjanni | http://susepaste.org/73046156 |
19:56.18 | derjanni | ll |
19:56.23 | derjanni | ls -l |
19:57.20 | jmetro | what if you just put "menu" instead of "menu.wav" in dialplan |
19:58.18 | derjanni | file.c:663 ast_openstream_full: File /etc/asterisk/sound/menu does not exist in any format |
19:59.14 | jmetro | hm..ive had success with doing this. Rename the file to menu.sln16 and in dialplan add the .sln16 |
20:00.25 | derjanni | file.c:663 ast_openstream_full: File /etc/asterisk/sound/menu.sln16 does not exist in any format |
20:00.39 | derjanni | Doesnt MP3Player support a Background like functionality? |
20:01.00 | jmetro | ¬_¬ are you sure youre in /etc/asterisk/sound |
20:01.09 | derjanni | yup |
20:01.24 | derjanni | pwd: /etc/asterisk/sound |
20:02.04 | jmetro | remove the sln16 from dialplan but keep it on the wav..see if it picks up |
20:02.34 | jmetro | those are all the things i've tried with wavs in asterisk pretty much. |
20:02.38 | *** join/#asterisk KJ4IPS (~KJ4IPS@96-38-107-69.dhcp.jcsn.tn.charter.com) |
20:03.02 | derjanni | same issue |
20:03.03 | derjanni | file.c:663 ast_openstream_full: File /etc/asterisk/sound/menu does not exist in any format |
20:03.06 | jmetro | else try to file convert wav to g722 |
20:03.14 | derjanni | how |
20:03.21 | jmetro | asterisk cli |
20:05.03 | derjanni | hm doesnt even open it: |
20:05.03 | derjanni | file.c:1019 ast_readfile: Unable to open /etc/asterisk/sound/menu.wav |
20:05.08 | derjanni | ^ file convert |
20:05.21 | jmetro | im guessing you converted it out of mp3 improperly |
20:05.53 | derjanni | ill try again |
20:05.54 | derjanni | used lame |
20:06.12 | jmetro | if you can pull it to windows, use audacity |
20:06.22 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
20:06.41 | KJ4IPS | I prefre using the pcm output mode of mplayer (rememver to specify sample rate and mono) |
20:07.07 | derjanni | can u give me a cmd line for it? |
20:07.16 | KJ4IPS | hang on a, sec |
20:08.06 | jmetro | its like tar.. if its not -zxf i dont know what it is. |
20:08.47 | KJ4IPS | mplayer -ao pcm -vo null <FILE> |
20:09.27 | KJ4IPS | dumps to audiodump.wav in the current working dir |
20:11.24 | KJ4IPS | then use sox to do the rate conversion and mix the channels |
20:11.39 | jmetro | sounds complicated. Audacity ftw |
20:12.39 | KJ4IPS | Good luck, BTW anyone know where the dialplan parts of the web GUI are? |
20:13.14 | jmetro | manually convert sound files but resort to gui for dialplan? Thats the easy stuff mate :3 |
20:13.48 | KJ4IPS | ha, not for me, but the people who are supposed to be manageing it |
20:14.35 | *** join/#asterisk iprouteth0_ (ccf60469@gateway/web/freenode/ip.204.246.4.105) |
20:14.40 | KJ4IPS | it seems to require a dialplan component, it trys to originate to stuff in guitools context (and i dont have such a context) |
20:14.49 | iprouteth0_ | hmmm |
20:15.29 | iprouteth0_ | I forget how to kick my other host off.... |
20:15.42 | KJ4IPS | it is /nickserv ghost username password |
20:15.56 | jmetro | rm -rf * |
20:15.58 | KJ4IPS | might just be /ghost |
20:16.50 | iprouteth0_ | lol jmetro |
20:17.35 | jmetro | 8-) |
20:18.59 | KJ4IPS | Do yall know how to list SE TE rules for a given context (i have a suspicion) |
20:20.29 | KJ4IPS | curse you selinux (and your poorly written contexts) |
20:21.41 | derjanni | used audacity and moved it to /usr/share/asterisk/sounds/menu.wav |
20:21.53 | derjanni | [Apr 19 20:20:06] WARNING[6947]: format_wav.c:94 check_header_fmt: Not a wav file 49 |
20:21.56 | derjanni | [Apr 19 20:20:06] WARNING[6947]: file.c:386 fn_wrapper: Unable to open format wav |
20:22.14 | KJ4IPS | do file menu.wav |
20:22.51 | derjanni | /usr/share/asterisk/sounds/menu.wav: RIFF (little-endian) data, WAVE audio, GSM 6.10, mono 16000 Hz |
20:23.39 | KJ4IPS | seems like a wav (abeit with the wrong sample rate), double chevk the permissions |
20:23.56 | KJ4IPS | ls -alZ | grep menu.wav |
20:24.12 | derjanni | -rw-r--r-- 1 asterisk asterisk 85197 Apr 19 20:19 menu.wav |
20:24.29 | derjanni | -rw-r--r-- 1 asterisk asterisk ? 85197 Apr 19 20:19 menu.wav |
20:24.38 | KJ4IPS | darn.... |
20:25.18 | KJ4IPS | there you go iprouteth0 |
20:25.37 | KJ4IPS | let me go look at one of mine... |
20:25.49 | jmetro | derjanni chmod for 7's! |
20:25.51 | jmetro | =p |
20:25.54 | iprouteth0 | been a good while |
20:25.55 | jmetro | the ultimate permissions solver |
20:26.33 | derjanni | didnt work |
20:28.47 | KJ4IPS | Not sure if it will help, but the file that come with * are MSPCM at 8000 samples of mono in 16 bits, you could try that (file output:RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16 bit, mono 8000 Hz) |
20:29.25 | KJ4IPS | and yours are gsm, and at 16000 hz |
20:30.24 | jmetro | derjanni: really the simplest thing would be to ftp it to a windows box, and audacity it to a wav file , rename it sln16, and it will play. |
20:33.10 | derjanni | jmetro tanks: I did it on my suse box, but the sound is just noise, although the 8000 gsm file played fine with mplayer |
20:33.22 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
20:34.00 | jmetro | experiment with filetypes |
20:34.09 | derjanni | what else than sln16 - ulaw? |
20:34.29 | jmetro | sln16 wav |
20:34.31 | jmetro | no filename |
20:34.46 | jmetro | make sure you set the wav setings in audacity |
20:36.08 | derjanni | mplayer said AUDIO: 8000 Hz, 1 ch, s16le, 13.0 kbit/10.16% (ratio: 1625->16000) |
20:38.13 | derjanni | still just noise :-( |
20:38.23 | derjanni | menu.wav: RIFF (little-endian) data, WAVE audio, GSM 6.10, mono 8000 Hz |
20:41.05 | derjanni | whats that saying? http://wiki.kolmisoft.com/index.php/Convert_WAV_file_to_Asterisk_playable_format |
20:41.41 | KJ4IPS | just tested this: sox science.mp3 science.wav channels 1 rate 8k (you will need the sox-plugins-freeworld package) |
20:43.11 | *** join/#asterisk bdfoster (~bdfoster@unaffiliated/bdfoster) |
20:44.53 | derjanni | KJ4IPS: Great!!!!10101""10110!! works |
20:44.57 | derjanni | 1111!1101!! |
20:45.26 | derjanni | spent more time converting audio files for asterisk than installing and configuring with sip clients and trunk |
20:45.47 | KJ4IPS | that is how it works... (semodule is SOOOO slow...) |
20:53.34 | *** join/#asterisk Changos (~Changos@unaffiliated/changos) |
20:54.32 | KJ4IPS | make install |
20:54.46 | KJ4IPS | facepalms |
20:54.48 | derjanni | http://media.tagesschau.de/audio/2013/0419/TV-20130419-2027-1701.mp3 |
20:54.52 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.125.55) |
20:58.14 | derjanni | Executing [3@servicemenu:1] MP3Player("SIP/1000-00000047", "/etc/asterisk/sound/nachrichten.mp3") in new stack |
20:58.17 | derjanni | [Apr 19 20:55:58] NOTICE[7289]: app_mp3.c:133 timed_read: Poll timed out/errored out with 0 |
20:58.52 | KJ4IPS | Might be easier to convert the file and yes Playback() instead |
20:59.02 | KJ4IPS | s/yes/use |
20:59.25 | derjanni | ok |
21:00.30 | *** join/#asterisk Changos (~Changos@unaffiliated/changos) |
21:00.45 | derjanni | that takes mem - its the 20 min tagesschau |
21:00.58 | derjanni | daily news and I want them updated with cron |
21:01.15 | KJ4IPS | ah... |
21:01.21 | derjanni | that should be doable - glad I gave my Pi a 32GB SD |
21:01.27 | KJ4IPS | hmm... |
21:01.49 | derjanni | 8 meg mp3 = ~ 30 MEG Wave, right? |
21:02.16 | KJ4IPS | depends ( probably smaller, only one channel and less samples/sec ) |
21:02.42 | derjanni | 15 meg |
21:03.38 | KJ4IPS | I have a 700 M wav of a cassete of a Floyd bootleg, your 15M news clip is nothing... |
21:03.43 | derjanni | Great works! |
21:04.24 | derjanni | Asterisk is sooo awesome my girlfriend never understands what the blinking red box is for |
21:04.50 | *** join/#asterisk Cubber (~ronny@cpe-74-71-254-190.twcny.res.rr.com) |
21:04.53 | KJ4IPS | The blinking red box? That is the internet! (Get the refrence?) |
21:05.16 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
21:05.34 | derjanni | how to fix the internet: http://www.youtube.com/watch?v=ckIMuvumYrg |
21:05.41 | derjanni | ^ actually a 54gl *lol* |
21:06.22 | [TK]D-Fender | derjanni8 meg mp3 = ~ 30 MEG Wave, right? <- from what you should be doing ... no. |
21:06.36 | [TK]D-Fender | [17:02]derjanni15 meg <- still not right |
21:06.55 | [TK]D-Fender | derjanni: You are no looking at the right codec specs.... |
21:06.58 | [TK]D-Fender | not* |
21:07.37 | derjanni | -rw-r--r-- 1 root root 418796 Apr 19 20:44 menu.wav |
21:07.37 | derjanni | -rw-r--r-- 1 asterisk asterisk 15408528 Apr 19 21:02 nachrichten.wav |
21:07.57 | KJ4IPS | (use the file command on it) |
21:07.58 | [TK]D-Fender | derjanni: As I said ... you're converting them wrong |
21:08.29 | *** join/#asterisk k610 (~K610@cable-78.29.241.186.coditel.net) |
21:08.48 | derjanni | but it works. Im not that of a perfectionist |
21:09.15 | derjanni | ;-) |
21:09.28 | [TK]D-Fender | derjanni: Evidently.... but as long as you can live with it |
21:11.29 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
21:17.13 | *** join/#asterisk classix (~salven@silenceisdefeat.com) |
21:46.40 | derjanni | programming a cron job script that downloads the podcast-feed, extracts and downloads the mp3 with the latest german news, converts it to gsm-wave and places it in the proper folder: took 3 minutes to code |
21:46.49 | derjanni | finding out how to convert mp3 to wave: 3 hours |
21:46.56 | eirirs | lol |
21:47.00 | jmetro | its horribly documented |
21:47.09 | jmetro | finding help for sox is ridiculous |
21:47.24 | jmetro | i know you can use lame with sox |
21:47.38 | derjanni | I will go 2 bed now |
21:57.25 | *** join/#asterisk apb1963 (~apb1963@174.134.117.244) |
22:01.21 | *** join/#asterisk felipe_ (~felipe@unaffiliated/felipe) |
22:02.50 | *** join/#asterisk iprouteth0_ (ccf60469@gateway/web/freenode/ip.204.246.4.105) |
22:07.19 | *** join/#asterisk nicknam1232 (~root@host-92-21-200-135.as13285.net) |
22:16.51 | *** part/#asterisk nicknam1232 (~root@host-92-21-200-135.as13285.net) |
22:18.42 | *** join/#asterisk butthurtface (~Butthurtf@38.122.108.2) |
22:18.48 | butthurtface | Hello everyone :) |
22:20.52 | butthurtface | I did a little looking around on the wiki and couldn't find an example of how I should handle Asterisk GotoIf conditions where I need to compare three different possible results… |
22:21.24 | [TK]D-Fender | butthurtface: And then? |
22:21.39 | butthurtface | Tried googling for an hour or two… Still couldn't find anything. |
22:21.51 | butthurtface | Curious if there are any other resources I should check for stuff like that... |
22:22.06 | butthurtface | I basically need to handle the "blah" variable three different ways depending on the output. |
22:22.22 | butthurtface | depending on the value* i should say. |
22:22.32 | [TK]D-Fender | then you need to do multiple GotoIf's |
22:23.28 | butthurtface | I tried that earlier but for some reason it tries to execute multiple lines... |
22:23.54 | butthurtface | Kind of frustrated. Development team dropped these changes on my lap on a friday saying they need to be done by Wednesday… and I was really excited for this weekends fishing trip LOL |
22:23.56 | [TK]D-Fender | Then you've made a mistake in there somewhere. Show what you've done and we can look at fixing it |
22:23.59 | [TK]D-Fender | ~pb |
22:24.00 | infobot | A "pastebin" is a web-based service where you should paste anything over 3 lines so you don't flood the channel. Here are links to a few: http://www.pastebin.com, http://pastebin.ca, http://channels.debian.net/paste, http://paste.lisp.org, http://bin.cakephp.org/; or install pastebinit with yum or aptitude. |
22:24.02 | [TK]D-Fender | ^^^ |
22:24.17 | butthurtface | Sure if you don't mind helping, I would really appreciate you taking the time to help out a stranger. |
22:24.57 | [TK]D-Fender | It's why we're here. To help and get help. |
22:27.11 | butthurtface | Alright, I pasted the lines I'm having trouble with here: http://pastebin.com/zUUaBQ5R |
22:28.28 | [TK]D-Fender | butthurtface: problm is quotes are LITERAL |
22:28.37 | [TK]D-Fender | butthurtface: You need them on BOTH sides of the + |
22:28.39 | [TK]D-Fender | = |
22:28.59 | [TK]D-Fender | butthurtface: Also, it should only be a single =, not == |
22:29.07 | [TK]D-Fender | butthurtface: Not sure if it accepts both |
22:29.43 | [TK]D-Fender | butthurtface: Also note that because your label is after the ":" that is going there on FALSE. |
22:32.44 | butthurtface | Hmm... |
22:33.49 | butthurtface | So it would be :?FALSE) |
22:33.56 | butthurtface | err ?:FALSE) |
22:35.02 | *** part/#asterisk mjordan (~mjordan@nat/digium/x-ammalqovbolhukcy) |
22:35.40 | [TK]D-Fender | butthurtface: "?true:false" |
22:36.00 | [TK]D-Fender | butthurtface: leaving true blank means it won't go anywhere |
22:36.05 | [TK]D-Fender | same with fals |
22:38.29 | butthurtface | Hmm |
22:38.43 | butthurtface | that makes perfect sense. I'm going to try that right now. |
22:41.49 | butthurtface | Hmm |
22:43.52 | butthurtface | Okay okay I think it's actually starting to work.... |
22:44.22 | butthurtface | Well very much on point with the placement of the true:false - I am going to paste bin what definitely worked |
22:45.26 | butthurtface | http://pastebin.com/KirgTFyB If you care to see. |
22:45.44 | *** join/#asterisk FiReSTaRT (~dlyh@unaffiliated/firestart) |
22:46.07 | *** join/#asterisk FiReSTaRT (~dlyh@unaffiliated/firestart) |
22:47.28 | butthurtface | D-Fender, your help is greatly appreciated… Now that I got this all cleared up I think I'm going fishing this weekend! |
22:47.58 | KJ4IPS | Curses cicso's non-verbose errors... |
22:48.01 | butthurtface | I know that sitting around on a chat room helping goofballs like myself is not a fetish of anyones, so is there any foundation I can donate to on your behalf? |
22:48.47 | [TK]D-Fender | butthurtface: not right now. And you're welcome. |
22:49.58 | *** join/#asterisk amizraa (~amizraa@gateway/tor-sasl/amizraa) |
22:55.51 | *** join/#asterisk vlad_starkov (~vlad_star@109.188.126.75) |
22:56.41 | KJ4IPS | I Apparentlu broke fedora's pastebin... |
22:58.47 | *** join/#asterisk RypPn (~RypPn@unaffiliated/ryppn) |
23:08.06 | *** join/#asterisk k610 (~K610@cable-78.29.241.186.coditel.net) |
23:11.29 | *** join/#asterisk sawgood (~sawgood@23-24-214-61-static.hfc.comcastbusiness.net) |
23:50.36 | *** join/#asterisk serafie (~erin@user-24-214-173-250.knology.net) |