00:10.15 | BlackBishop | exten => 1XX,n,Dial(SIP/${EXTEN},20) |
00:10.45 | BlackBishop | should replace all lines like 101,1,Dial(SIP/100,20) 102,1,Dial(SIP/102,20) .. right ? |
00:11.26 | [TK]D-Fender | BlackBishop: Several clear differences |
00:11.53 | BlackBishop | which ? |
00:12.12 | [TK]D-Fender | <PROTECTED> |
00:13.01 | BlackBishop | _1XX then .. |
00:13.59 | BlackBishop | and ,1 :) yeey |
00:15.39 | BlackBishop | exten => _1XX,1,GotoIf($["${CDR(src)}" = "${CDR(dst)}"]?... how do I tell it to go to Busy ? |
00:16.31 | Kobaz | what should i do if timing from dahdi_dummy is all fscked |
00:16.45 | *** join/#asterisk guilhermebr (~Guilherme@189.63.87.234) |
00:16.46 | Kobaz | what are alternatives that don't require hardware |
00:17.12 | Kobaz | demo2 {/apps} root# dahdi_test |
00:17.24 | Kobaz | 20.018% 19.911% 20.013% 20.013% 20.013% 20.013% 19.916% 20.014% |
00:17.29 | Kobaz | that's pretty bad... right? |
00:19.08 | Kobaz | at least it's consistant |
00:20.19 | [TK]D-Fender | BlackBishop: Where is the "busy" in your dilplan you wnt to jump to? |
00:21.10 | BlackBishop | exten => _1XX,1,GotoIf($["${CDR(src)}" = "${CDR(dst)}"]?s-Busy,1) .. exten => _1XX,n,Dial(SIP/${EXTEN},20) .. exten => s-BUSY,1,Busy .. |
00:21.14 | BlackBishop | and we have a winner ! :D |
00:21.23 | Kobaz | kicks dahdi_dummy |
00:22.04 | Kobaz | picks up a bat |
00:22.37 | BlackBishop | Kobaz: get a bigger hammer ! |
00:23.18 | hardwire | Mjöllnir |
00:23.31 | *** join/#asterisk Faithful (~Faithful@nat65.mia.three.co.uk) |
00:23.34 | BlackBishop | thanks [TK]D-Fender, NuclearLucifer, beardy, citywok :)) |
00:23.44 | TJNII | Kobaz: .... isn't that supposed to be up areound 99%? |
00:23.53 | Kobaz | uhh yeah |
00:24.16 | drmessano | OMG what did I miss |
00:25.05 | Kobaz | OMFGROTFLMAOFUBAR |
00:25.11 | BlackBishop | next thing .. voicemail ! later today after I finish reading the next chapter in my Sybex CCNA study guide .. |
00:25.36 | drmessano | I'm gonna DDoS infobot, watch this: |
00:25.38 | drmessano | Hi |
00:25.52 | BlackBishop | hmm .. voicemail or conference .. . |
00:25.59 | drmessano | ^^^ Pending disk failure from logging unnecessary words |
00:26.19 | BlackBishop | infobot: m00 |
00:26.49 | BlackBishop | sleep time .. thanks again everybody ! |
00:28.28 | TJNII | drmessano: Glad to see that little gem didn't pass you by. |
00:28.42 | Kobaz | so umm |
00:28.46 | Kobaz | how do i unfsck dahdi |
00:29.50 | drmessano | TJNII: IM IN UR SRVRS, SNDING BAD SIP INVITES |
00:29.59 | TJNII | NOES! |
00:30.57 | drmessano | I have a RAID on my desktop. Should be concerned that seanjohn DDoS'ed me because I am logging IRC? |
00:31.11 | drmessano | I mean THINK ABOUT IT |
00:31.36 | TJNII | Did you write protect you CMOS ROM? |
00:32.19 | drmessano | Oh NOES |
00:32.24 | drmessano | He just got DDoSed |
00:32.36 | TJNII | wraps his har drive in foil |
00:32.56 | drmessano | or maybe it was one of those Multiple SIP Denial Of Service attacks |
00:33.00 | drmessano | AKA MS-DOS |
00:56.06 | *** join/#asterisk coppice (~chatzilla@245.168.17.210.dyn.pacific.net.hk) |
00:57.33 | *** join/#asterisk Faithful (~Faithful@nat65.mia.three.co.uk) |
01:04.53 | *** join/#asterisk Kumbang (~kumbang@rusnas.paume.itb.ac.id) |
01:09.20 | carrar | I just put raid on my desktop too |
01:09.20 | carrar | http://www.osburn.com/raid.jpg |
01:10.51 | TJNII | I like that joke. Stupid and simple. |
01:11.00 | *** join/#asterisk chilicuil (~chilicuil@unaffiliated/chilicuil) |
01:11.09 | TJNII | I should take an empty can of RAID in to set on my jbod at work. |
01:11.15 | TJNII | "I made it a raid." |
01:11.34 | carrar | take two |
01:11.41 | carrar | You need a online spare |
01:12.04 | carrar | maybe heat it up |
01:12.06 | TJNII | True! |
01:12.44 | TJNII | Yea, I can't immediately think of any way to do a "hot spare" joke that wouldn't end badly. |
01:12.52 | TJNII | Actual fire would probably end with halon. |
01:15.15 | drmessano | Pop the caps off and put a drinking straw between the nozzles |
01:25.34 | *** join/#asterisk nightwalk (~nightwalk@daimon.vixel.org) |
01:35.19 | *** join/#asterisk Mhaddog_Mac (~anonymous@adsl-32-170-204.mia.bellsouth.net) |
01:39.30 | *** join/#asterisk OrNix (~ornix@l49-0-149.cn.ru) |
01:39.57 | raden | how can i drop a registration from console ? |
01:55.29 | *** join/#asterisk sylar (~sylarrrr@bzq-79-177-48-232.red.bezeqint.net) |
01:56.34 | ChannelZ | sip unregister xxxxx |
02:00.25 | raden | technically it should reregister right ? |
02:01.45 | ChannelZ | well that depends on the timeout/reregister timer of the device |
02:01.52 | raden | 3600 |
02:02.08 | ChannelZ | or are you unregistering an asterisk registration somewhere else (like your ITSP) |
02:02.22 | raden | box phone registered to |
02:02.53 | ChannelZ | well if by 3600 you meant that's what the rereg timer is set to then that's an hour |
02:03.39 | raden | LOL my phone just came back online |
02:03.43 | raden | yes rereg time |
02:03.49 | raden | what should it be set to ? |
02:04.09 | ChannelZ | whatever makes sense to your setup |
02:04.23 | raden | <PROTECTED> |
02:04.31 | raden | 303/303 (Unspecified) D N 0 Unmonitored |
02:04.36 | raden | im confussed |
02:05.42 | ChannelZ | Me too. I asked for 'no pickles' yet here they are. |
02:08.53 | raden | if rereg is set to 60 does that mean no matter what it will rereg every 60 min ? |
02:21.03 | *** join/#asterisk wonderworld (~ww@ip-62-143-22-226.unitymediagroup.de) |
02:23.33 | raden | why when i see -- Registered SIP '302' at 69.130.250.249 port 26622 |
02:23.40 | raden | its not showing up in sip show peers ? |
02:24.09 | raden | 302/302 (Unspecified) D N 0 Unmonitored |
02:27.39 | raden | ???? la la la la , la la la ..... |
02:31.00 | *** join/#asterisk sylar (~sylarrrr@bzq-79-177-48-232.red.bezeqint.net) |
02:44.54 | *** join/#asterisk geneg1 (~gene@bas3-toronto01-1177778310.dsl.bell.ca) |
02:45.36 | *** join/#asterisk sylar (~sylarrrr@bzq-79-177-48-232.red.bezeqint.net) |
02:48.22 | *** join/#asterisk Mhaddog_Mac (~anonymous@adsl-32-170-204.mia.bellsouth.net) |
02:49.14 | *** join/#asterisk tzafrir_laptop (~tzafrir@bzq-218-155-146.cablep.bezeqint.net) |
02:52.49 | *** join/#asterisk thansen (~thansen@c-98-202-28-239.hsd1.ut.comcast.net) |
03:00.59 | *** join/#asterisk dkirker-openmobl (~dkirker@openmobl/ceo/dkirker) |
03:02.33 | *** join/#asterisk drclue (~drclue@ip-65-49-164-42.wireless.dyn.beamspeed.net) |
03:02.51 | drclue | I have an AMI question. When an AMI client connects , how can it having not been there for an "MusicOnHold" event or such determine which channels are "on hold"? |
03:07.34 | *** join/#asterisk Deathvalley122 (~Death@unaffiliated/deathvalley122) |
03:10.40 | ChannelZ | drclue: ExtensionState maybe? |
03:13.02 | drclue | ExtensionState does not seem to make any indication of hold status. I've written an HTML5 websockets based interface that reports each and every event in XML format , and nothing in the result would seem to indicate an on-hold state |
03:13.39 | drclue | <?xml version="1.0" ?> <event name="_AMIsuccess"> <response>Success</response> <actionid>1280459462_49_HTML5_4c5241f719d4a</actionid> <message>Extension Status</message> <exten>4096</exten> <context>AsterClick</context> <hint></hint> <status>-1</status> </event> |
03:15.07 | *** join/#asterisk tzafrir_laptop (~tzafrir@bzq-218-155-145.cablep.bezeqint.net) |
03:15.22 | drclue | I've been having enough luck with my new AsterClick tool that I'm working on things like state re-sync for when the AMI client arrives on an asterisk reality in progress |
03:20.57 | drclue | It's actually pretty cool watching the web page update in real time without the traditional polling, but rather using realtime events. God I'm loving HTML5 WebSockets. None the less , trying to find effective methods / AMI commands to establish the current state of in progress calls is eluding me. I can through things like coreshowchannels see that calls are in progress , but catching things like hold state has me for the momen |
03:24.36 | drclue | It's not such a big deal to catch the migrating states of new calls (pretty simple really) , but I want my AsterClick interface to be able to arrive on the scene whenever it is activated and be able to accurately relay the current state of asterisk and all calls, including such silly things as hold state |
03:26.48 | *** join/#asterisk aidinb (~Aidin@unaffiliated/aidinb) |
03:30.23 | *** join/#asterisk riddlebox (~james@75-132-225-75.dhcp.stls.mo.charter.com) |
03:35.23 | drclue | Hey , I'll PayPal $30.00 for anyone who can give me but a workable method of determining the current hold state of channels via an AMI client connecting AFTER the hold state occurs |
03:37.07 | WIMPy | 'sip show channels' will tell you for sip. |
03:40.57 | *** join/#asterisk Ziaeon (~Alchemist@adsl-074-166-171-132.sip.mia.bellsouth.net) |
03:44.43 | drclue | @WIMPy , Darn , and I was all ready to PayPal some cash. sip show channels indicates nothing about the hold state, or am I missing something? |
03:45.05 | drclue | Shit , maybe I spoke too soon |
03:45.14 | WIMPy | I have a column named 'Hold'. |
03:47.55 | *** join/#asterisk Corydon76-dig (orange@c-69-137-80-31.hsd1.tn.comcast.net) |
03:47.56 | *** mode/#asterisk [+o Corydon76-dig] by ChanServ |
03:48.05 | drclue | Alright WIMPy , you just scored $30.00 bounty. Email your paypal address to drclue@drclue.net and I'll shoot your reward out tomorrow sometime. |
03:48.25 | *** join/#asterisk russ (foobar@ip70-176-251-1.ph.ph.cox.net) |
03:49.14 | WIMPy | Nice one. Now the interesting question would be if I know anyone who has a paypal account... |
03:50.00 | *** join/#asterisk radic (~radic@dslb-094-216-244-242.pools.arcor-ip.net) |
03:50.49 | drclue | BTW WIMPy , your most certainly invited to join the AsterClick open source project at asterclick.drclue.net we are always looking for smart asses and sometimes we even have paying gigs. OK brother , if ya don't have a paypal account , I feel for ya, so send along where you might want your donation sent and we'll try and sort it out |
03:55.29 | *** join/#asterisk QN (~mIRC@203.127.232.36) |
03:55.33 | WIMPy | Actually I haven't really understood, what it's about. Are you just doing a status display or is that just a first step for something else? |
03:56.59 | *** join/#asterisk yidiyuehan (~yidiyueha@bb116-15-127-66.singnet.com.sg) |
03:57.54 | yidiyuehan | Hi, anybody knows where to change the dtmf tones generated by asterisk? |
03:58.59 | drclue | @WIMPy : AsterClick is an HTML5 WebSockets JavaScript interface to AMI that is able to do away with old school polling and actually use real-time events in HTML5 browsers |
03:58.59 | raden | everytime i get off my phone asterisk is unregistering it ? |
04:00.02 | WIMPy | drclue: Yes, I did read that part, but what's the purpose? |
04:02.09 | drclue | The purpose is to make HTML5 applications that can do anything Asterisk can do via a simple javascript interface that among other things can use a standard Javascript addEventListener function that takes AMI events just the same way one might use onmouseover or such |
04:02.36 | WIMPy | So it's a framework? |
04:02.50 | WIMPy | Not an Application? |
04:03.09 | drclue | Thes applications will be able to run in browsers, on cellhphones or any other context that sports HTML5 support |
04:03.17 | ChannelZ | yidiyuehan: change how |
04:04.06 | drclue | Yes , AsterClick is a framework, not specifically an application itself |
04:04.28 | *** join/#asterisk sylar (~sylarrrr@bzq-79-177-48-232.red.bezeqint.net) |
04:04.40 | drclue | The testbed application "AsterClickHUD" makes HUD lite look like a joke |
04:05.27 | yidiyuehan | ChannelZ, when under a call, I want to press dtmf tone from my phone and be heard from the remote end phones. But asterisk tends to regenerate and send the tone. |
04:05.59 | yidiyuehan | unfortunately the tone generated by asterisk is not recoginized by the terminal device. |
04:06.26 | ChannelZ | It depends on the chain of channels and what dtmf method they are using |
04:07.05 | *** join/#asterisk thansen (~thansen@c-98-202-28-239.hsd1.ut.comcast.net) |
04:07.08 | yidiyuehan | I know inband is working fine. But I want to use rfc2833. |
04:07.09 | ChannelZ | If your phone is SIP, chances are it's using rfc in which case when you press buttons it's not actually generating any tone, it's generating metadata messages |
04:07.51 | yidiyuehan | I am calling in using cell phone to PSTN Gateway, which is registered to Asterisk through SIP as well. |
04:08.13 | *** join/#asterisk philipp64|laptop (~chatzilla@63.81.41.227) |
04:08.14 | yidiyuehan | If I set to inband asterisk will bypass the tones correctly. |
04:08.24 | yidiyuehan | but the IVR might not be working reliably. |
04:09.26 | ChannelZ | Your cell phone is generating inband DTMF. The PSTN gateway should (probably) be doing DTMF detection on that, and turning it into rfc2833 which then hits Asterisk. What is your gateway/ATA device? |
04:10.33 | yidiyuehan | I am using Audiocodes MP114 |
04:11.20 | drclue | The AsterClick framework can do useful things in as little as 12 lines of nicely formatted JavaScript |
04:11.50 | yidiyuehan | ChannelZ. Cell phone ==> PSTN Gateway ==> ASTERISK ( with IVR) ==> IP Phone. |
04:12.11 | drclue | If one wants really compact examples , AsterClick can do something useful in 2 lines of Javascript |
04:12.47 | yidiyuehan | ChannelZ. If I use inband for both gateway and asterisk, I can have the right dtmf tones at the IP Phone end. But IVR is not working some times. |
04:13.43 | yidiyuehan | If I use rfc2833, IVR forever is working, but the tone at the IP phone site is totally wrong. |
04:14.21 | yidiyuehan | I guess it was because when the asterisk detects the tone (rfc2833), it has regenerated, but why not regenerate the correct tones? |
04:14.37 | ChannelZ | I don't really understand what you're saying about the 'tone at the IP phone site is totally wrong' |
04:14.44 | drclue | DTMF can be a real pain and sometimes one has to futz with the configuration to tune DTMF. I would tell ya exactly what , but I'm in the middle of coding with a dozen windows open. Search voip-info for DTMF and you should find some answers |
04:15.53 | yidiyuehan | Hi ChannelZ, 'tone at the IP phone site is totally wrong' means, If I connect a DTMF receiver IC to the speaker of the IP phone handset. |
04:16.00 | yidiyuehan | It couldn't detect at all. |
04:16.20 | ChannelZ | First of all inband isn't preferred because of codec issues, unless you're using ulaw/alaw inband DTMF can easily be chewed up. I don't know your setup. |
04:16.54 | yidiyuehan | yes I am actually using Ulaw codec. but with inband it seems that asterisk IVR isn't detecting correctly. |
04:17.16 | yidiyuehan | I am just not sure whether inband is a reliable way to use IF I did use ulaw all the time. |
04:18.43 | drclue | @WIMPy: what would I need to do to send you your $30 bounty? What country are you in ? |
04:18.45 | yidiyuehan | and in fact inband is the preferable way to use if IVR has no problem with it. |
04:18.58 | ChannelZ | I'm just not understanding what your problem is. You said with rfc2833 Asterisk is picking up all the digits |
04:19.44 | yidiyuehan | ChannelZ, rfc2833 is working perfectly with IVR. however, I have an application which needs to detect the dtmf tone at the IP Phone end as well. |
04:20.03 | yidiyuehan | With rfc2833 the tone received at the IP Phone end is just not right. |
04:20.08 | *** join/#asterisk jql (~jql@12.9a.344a.static.theplanet.com) |
04:20.14 | ChannelZ | as in you have a custom application which is decoding the actual audio stream? |
04:20.22 | yidiyuehan | Cell phone ==> PSTN Gateway ==> ASTERISK ( with IVR) ==> IP Phone. |
04:20.45 | yidiyuehan | nop, I have a dtmf receiver IC which is connected to the IP Phone speaker site. |
04:21.02 | yidiyuehan | by right If I press some tones, I should be able to listen to it at the IP phone speaker. |
04:21.24 | yidiyuehan | and my dtmf detecting IC will detect this tone and activate my other applications. |
04:21.57 | ChannelZ | so you're talking about some external hardware which is connected (analog?) physically to your IP phone |
04:22.11 | yidiyuehan | ChannelZ, yes ;-) |
04:22.38 | yidiyuehan | the only problem here is: with rfc2833 which I prefer to use, asterisk regenerates the whole dtmf tones. |
04:22.57 | yidiyuehan | and this tones are not right. |
04:23.03 | ChannelZ | if your SIP phone is using rfc2833 to asterisk, there is no actual DTMF tone. it would be generated by the phone its self |
04:24.42 | yidiyuehan | if I press a dtmf tone at my cell phone, and asterisk did send this tone to my SIP phone, but due to rfc2833, My SIP phone will actually choose to regenerate the tone itself and play to its speaker. am I right? |
04:25.05 | ChannelZ | unless it's something strange with your whole path, that the inband DTMF comes into your gateway and gets detected, sent along to asterisk as rfc2833 messages but the actual DTMF audio still passes through, and then your phone is also generating its own which is mixing with the original inband and causing your detection to be all jacked up |
14:16.47 | *** join/#asterisk infobot_ (~infobot@rikers.org) |
14:16.47 | *** topic/#asterisk is Asterisk: The Open Source PBX and Telephony Platform (asterisk.org) -=- Asterisk 1.8.0-beta1 (2010/07/23), 1.6.2.10 (2010/07/23), 1.4.34 (2010/07/23), *-Addons 1.6.2.1, 1.4.11 (2010/04/15), dahdi-linux 2.3.1 (2010/05/25), dahdi-tools 2.3.0 (2010/04/13), libpri 1.4.11.3 (2010/06/29) -=- Related channels: #asterisknow,#switchvox,#freepbx,#asterisk-dev,#asterisk-bugs |
14:16.52 | doolittlework | IamTrying what are u trying to do? |
14:16.56 | IamTrying | but what if i want to edit it by PHP |
14:17.32 | doolittlework | you still have to do a reload otherwise your changes to the config will do nothing, not be active |
14:17.34 | IamTrying | doolittlework, i just want to edit the file .conf and make sure its onFly got changed (in asterisk) |
14:18.50 | doolittlework | use php to do a bash script to the system after your changes has been done asterisk -rx "extensions reload" |
14:19.07 | IamTrying | o great thank you. |
14:19.45 | FlashDeluxe | or better: |
14:19.59 | FlashDeluxe | with when convenient |
14:20.19 | FlashDeluxe | than it will reload as nobody is actually calling |
14:20.35 | doolittlework | i think the when convenient only applies to restart, i might be wrong |
14:20.45 | *** join/#asterisk bmint (~bmint@h174.92.190.173.static.ip.windstream.net) |
14:20.59 | doolittlework | you dont have to restart sterisk to make config changes active just reload |
14:21.49 | FlashDeluxe | youre right, sorry^^ |
14:21.58 | doolittlework | FlashDeluxe howd o you specify your d channels in your config using dahdi |
14:23.10 | FlashDeluxe | dchan=3 ?^^ |
14:23.55 | FlashDeluxe | the d-channel error still occurs but now i get a new error if i want to make a call |
14:23.56 | FlashDeluxe | app_dial.c:1747 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 34 - Circuit/channel congestion) |
14:24.42 | FlashDeluxe | any suggestions on that?^^ |
14:24.51 | doolittlework | add the group=1 to your config they change the dial(dahdi/g1/${EXTEN}) |
14:25.11 | FlashDeluxe | i did that |
14:25.19 | FlashDeluxe | and now this error |
14:25.20 | FlashDeluxe | app_dial.c:1747 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 34 - Circuit/channel congestion) |
14:25.23 | *** join/#asterisk evilbit (~evilbit@n1-20-152.dhcp.drexel.edu) |
14:25.27 | doolittlework | did you restart asteriks? |
14:25.40 | FlashDeluxe | yes |
14:25.52 | evilbit | is there a way to set the CID, in voicemail.conf, when making a call from voicemail. Like there is from sip.conf? |
14:26.19 | doolittlework | paste your lsmod | grep dahdi |
14:26.56 | doolittlework | do you have link lights on your card, like green and flashing red? |
14:27.05 | *** join/#asterisk ariel_ (~chatzilla@c-24-127-196-248.hsd1.fl.comcast.net) |
14:27.14 | FlashDeluxe | http://paste.debian.net/81813/ |
14:27.14 | *** join/#asterisk mboehn (mathias@mboehn.alfa-skk.pr0jectX.net) |
14:27.59 | doolittlework | i take it you are using the zaphfc driver? |
14:28.09 | cadey2 | Does anyone no the best way (using the manager 5038) to query phones to see if they are avaliable or busy etc ? |
14:28.48 | *** join/#asterisk telnettech (~telnettec@216.49.139.56) |
14:29.05 | FlashDeluxe | yes, but this is right |
14:29.32 | FlashDeluxe | ps there are no lights on the card |
14:32.12 | LtScarr | hey everyone |
14:32.29 | doolittlework | try disabling all the other drivers that is loading you only need the one for the module, the wcb4xxp might be clashing drivers heads |
14:32.39 | doolittlework | hey LtScarr |
14:32.51 | LtScarr | does someone have experience with audio drops when asterisk is behind a nat router with SPI protection enabled? |
14:33.16 | FlashDeluxe | ok ill do it in 5minutes |
14:33.20 | LtScarr | mainly used in linksys and cisco routers |
14:33.27 | zoa | LtScarr: i had such an issue with d-link |
14:33.29 | zoa | but not audio drops |
14:33.35 | zoa | but just sip fuckups |
14:33.48 | zoa | i have a lot of issues with my linksys |
14:33.51 | zoa | all of them |
14:33.55 | zoa | they are rubbish |
14:34.03 | zoa | they need a reset every day at least once |
14:34.12 | LtScarr | i'm no fan of them either :) |
14:34.27 | LtScarr | but some ISP's have crazy DHCP servers |
14:34.28 | doolittlework | the billion works well |
14:34.58 | LtScarr | i've been banging my head for two days |
14:35.13 | LtScarr | figuring out why my linux box couldn't get a proper lease |
14:35.20 | LtScarr | while my windows machine did |
14:35.29 | doolittlework | I've just recently tried enabling SPI protection again and what I noticed now is that I can achieve speeds up to 155kb/sec on BT but the speed drops pretty dramatically, it can't stablize. For 5 seconds I get 155kb/sec speed and then it would suddenly drop to 9kb/sec |
14:36.35 | LtScarr | hmm good thing i turned it off then |
14:37.07 | *** join/#asterisk ruben23 (~RLACUMBA@121.97.111.142) |
14:38.09 | doolittlework | there must be a way that i am unaware of to tune the SPI firewall so that I can achieve both performance and protection |
14:39.27 | LtScarr | but most lan's are behind NAT |
14:39.44 | doolittlework | true |
14:39.45 | LtScarr | so i don't see any point enabling it |
14:39.55 | *** join/#asterisk anthm (~anthm@freeswitch/developer/anthm) |
14:40.44 | doolittlework | i have had endless voice problems if i enable, i think they should ship without |
14:41.13 | LtScarr | that brings me to my next question |
14:41.15 | IamTrying | When i put this command ex: exten => 1,1,Playback(asterisk), which file/path it looks for the sound? ex: /usr/share/asterisk/sounds/asterisk.mp3 |
14:41.40 | LtScarr | does anyone have any experience with succesfully deploying a asterisk server behind a linksys router, without audio drops? |
14:43.07 | LtScarr | sip/rtp and such |
14:43.17 | drmessano | Yep |
14:43.29 | zoa | i would stay away from spi protection |
14:43.39 | zoa | i have seen only bugs with those |
14:43.50 | drmessano | Linksys router should work no worse/better than any other with Asterisk |
14:43.57 | drmessano | Open ports, configure Asterisk for NAT, done |
14:44.20 | LtScarr | hmm okay |
14:45.04 | LtScarr | well i hope this solves it then |
14:45.14 | *** join/#asterisk TSM2 (~the_softw@78-105-6-158.zone3.bethere.co.uk) |
14:46.21 | drmessano | I've put dozens of Linksys boxes in service with Asterisk behind them, and they work great |
14:47.19 | drmessano | Grantid, I run DD-WRT on almost all of them.. but latest firmware on any modern Linksys router should work find for SIP |
14:47.27 | drmessano | and by modern, I mean, less than 8 years old |
14:51.10 | FlashDeluxe | doolittleworks: did not help :( I get the errors here: http://paste.debian.net/81816/ |
14:51.32 | FlashDeluxe | suggestions? anybody? |
14:52.16 | [TK]D-Fender | FlashDeluxe: [Jul 30 14:49:21] WARNING[3876]: chan_oss.c:486 setformat: Unable to re-open DSP device /dev/dsp: No such file or directory <--- Console can't grab resources right. Stop using it |
14:52.22 | *** join/#asterisk zerohalo (~zerohalo@173-13-92-17-NewEngland.hfc.comcastbusiness.net) |
14:52.25 | [TK]D-Fender | FlashDeluxe: Set up a softphone or use something else |
14:56.23 | zoa | linksys and pppoe is a no go |
14:56.31 | zoa | dd-wrt doesnt help for it :( |
14:56.31 | FlashDeluxe | so a softpone would work? |
14:56.49 | FlashDeluxe | do you know why this d channel error appears? |
15:03.20 | *** join/#asterisk anonymouz666 (~anonymouz@187-28-37-118.poolip.RJO.embratel.net.br) |
15:05.33 | *** join/#asterisk aidinb (~Aidin@unaffiliated/aidinb) |
15:06.39 | [TK]D-Fender | FlashDeluxe: pastebin all of your dahdi configs |
15:07.41 | cadey2 | any AMI gurus in here got 5 mins ? |
15:09.23 | *** join/#asterisk chuckz (~lechuck@static-217-133-45-63.clienti.tiscali.it) |
15:10.28 | *** join/#asterisk Tim_Toady (~moi@178.128.17.211.dsl.dyn.forthnet.gr) |
15:10.37 | FlashDeluxe | [TK]D-Fender: http://paste.debian.net/81823/ |
15:10.47 | BlackBishop | [TK]D-Fender: any way to use patterns in voicemail.conf ? :) |
15:11.04 | *** join/#asterisk southtel_ (~slester@c-24-126-177-12.hsd1.ga.comcast.net) |
15:12.25 | southtel_ | I am having a problem with DTMF on my asterisk system (details to follow). |
15:13.04 | southtel_ | When dialing in, and on an IVR menu DTMF digits are not being recognized as pressed. |
15:13.23 | *** part/#asterisk IamTrying (~IamTrying@94-227-2-47.access.telenet.be) |
15:13.26 | southtel_ | That is 101 will often get received as 11, 10, or 01. |
15:14.21 | southtel_ | This appears to only be happening when the Background app is playing. If * is in a Wait or other places, it seems to be okay. |
15:14.39 | *** join/#asterisk ESCulapio__ (~Error@Leased-Lines-207-178.tricom.net) |
15:15.01 | southtel_ | We have tried from multiple phones (both landline, voip, and mobile) and there doesn't seem to be any correlation. |
15:16.03 | southtel_ | We are located in the US in a sub-urban area. I don't know our distance to the CO, but I'd presume we're relatively close (read: we're not in the sticks). |
15:16.09 | southtel_ | The carrier is AT&T. |
15:16.16 | *** join/#asterisk thansen (~thansen@c-98-202-28-239.hsd1.ut.comcast.net) |
15:16.23 | *** join/#asterisk richardf (~savag3@173.116.124.202.static.snap.net.nz) |
15:16.35 | southtel_ | The * box is about 18 months old, and has worked fine until recently. |
15:17.31 | *** join/#asterisk bsaxon_ (~bsaxon@12.107.149.61) |
15:17.34 | evilbit | is there a way to set the CID, in voicemail.conf, when making a call from voicemail. Like there is from sip.conf? |
15:18.10 | *** join/#asterisk wcselby (~wcselby@216.110.88.194) |
15:18.12 | southtel_ | We are running two analog cards in the system, a TDM400P and a TDM410P, one with 4 channels in it and one with 1 |
15:18.17 | wcselby | o/ |
15:18.37 | ESCulapio__ | Hello, I have asterisk Business edition c2.3.3, I can install a fax server |
15:18.46 | ESCulapio__ | ? |
15:19.09 | southtel_ | D-Fender, I'm trying to cover the relevant points...do you have any thoughts on DTMF? |
15:19.25 | *** join/#asterisk aidinb (~Aidin@unaffiliated/aidinb) |
15:19.33 | malcolmd | southtel_: you can contact our support team (http://www.digium.com/support) about the TDM410. unfortunately, the TDM400 hit end of life back in february. |
15:20.49 | southtel_ | Fair enough, thanks. |
15:21.19 | southtel_ | We just swapped out cards this morning on the 410, and promptly got errors. |
15:21.20 | ESCulapio__ | I have to do to install a fax server to asterisk ABE c2.3.3 |
15:21.22 | ESCulapio__ | ? |
15:21.25 | [TK]D-Fender | BlackBishop: No |
15:21.50 | *** join/#asterisk Goshen (~Goshen@c-174-52-7-122.hsd1.ut.comcast.net) |
15:22.04 | *** join/#asterisk TSM (~the_softw@78-105-6-158.zone3.bethere.co.uk) |
15:22.05 | b11d` | ESCulapio__.. contact digium support for ABE questions |
15:23.49 | [TK]D-Fender | FlashDeluxe: signalling = bri_cpe <--- IIRC there is another setting for this like bri_ptmt or something like that. I'm wondering if yours is wrong |
15:24.09 | [TK]D-Fender | southtel_: Show us something |
15:24.26 | ESCulapio__ | b11d`, My support ended |
15:24.37 | b11d` | thats tough :) |
15:24.47 | *** join/#asterisk moy (~moy@UNVLON55-1176057127.sdsl.bell.ca) |
15:24.48 | b11d` | this is for open source asterisk support though.. |
15:25.10 | FlashDeluxe | [TK]D-Fender: mhh i connected the card to ptp and think that this is the right settingà |
15:25.19 | *** join/#asterisk adyn (~adyn@onu-hq.onenetusa.net) |
15:25.35 | [TK]D-Fender | FlashDeluxe: I suspect it isn't |
15:25.54 | [TK]D-Fender | ESCulapio__: then go install a regular * release |
15:25.56 | southtel_ | D-Fender: I'll pastebin it for you, but by errors, I just mean that it didn't recognize the DTMF digits...no actual * errors, per se. |
15:26.05 | [TK]D-Fender | southtel_: I want to SEE. |
15:26.21 | southtel_ | Understood. Stand by. |
15:27.04 | *** join/#asterisk Ad-Hoc (~nimbus@62.1.166.114.dsl.dyn.forthnet.gr) |
15:27.05 | ESCulapio__ | [TK]D-Fender, I was Thinking |
15:27.25 | *** join/#asterisk KavanS (~KavanS@unaffiliated/kavans) |
15:27.52 | FlashDeluxe | [TK]D-Fender: I looked it up this setting is correct...perhaps the cable is broken or sth? |
15:27.57 | Katty | someone come change a tire for me. |
15:28.26 | Katty | it are leaking |
15:28.37 | DogBoy | oh yea mine too |
15:28.41 | Katty | :< |
15:28.45 | russellb | Katty: drive here and I'll plug it |
15:28.47 | DogBoy | and it's my day off and walmart will fix it free |
15:28.50 | *** join/#asterisk joobie (~joobie@CPE-124-181-130-3.vic.bigpond.net.au) |
15:28.55 | *** join/#asterisk Cain (~Geek@unaffiliated/cain) |
15:29.01 | Katty | russellb: i has appt at 11 to get it fixed. |
15:29.04 | Katty | russellb: well, new tire |
15:29.07 | russellb | Katty: yay |
15:29.27 | Katty | russellb: i sweet talked a guy at the gas station into airing it up for me last night |
15:29.50 | russellb | nice moves |
15:30.04 | Katty | mhmm |
15:30.24 | *** join/#asterisk brad_mssw (~brad@shop.monetra.com) |
15:30.35 | Katty | it's amazing what acting dumb can get you ;) |
15:31.27 | southtel_ | http://pastebin.com/cCf2LDXU ("error" is midway down, dialed digits were 102, received was 12) |
15:31.29 | joobie | that's called taking advantage of someone |
15:32.08 | Katty | no it's not |
15:32.20 | [TK]D-Fender | southtel_: So you lost 1 digit? |
15:32.31 | Katty | it's a guy going i get to do something nice for a pretty girl! |
15:32.32 | [TK]D-Fender | southtel_: and this was while hearing the IVR? |
15:32.45 | Katty | he was not upset by any means ;) |
15:32.59 | joobie | how do we kno ur pretty |
15:33.06 | Katty | you don't |
15:33.35 | joobie | hmm that sucks |
15:33.50 | FlashDeluxe | she`s in IRC she cannot be pretty... _not_ possible :P |
15:33.52 | southtel_ | Yes. |
15:34.02 | Katty | exactly. |
15:34.07 | Katty | i'm a horrid looking non-female. |
15:34.13 | southtel_ | D-Fender: Yes, while hearing the IVR. We generally only loose one digit. |
15:35.08 | southtel_ | D-Fender: we've played with relaxdtmf, to no success. Dialing is not overly slow, but not as fast as possible (average dialing speed). |
15:35.37 | FlashDeluxe | yes you are :D :P |
15:35.56 | Dorothy | lets see if this helps |
15:36.06 | [TK]D-Fender | southtel_: Could be a mild echo issue. |
15:36.27 | [TK]D-Fender | southtel_: This from a landline phone? is the loss consitant (generally) amonst callers? |
15:36.45 | Dorothy | [TK]D-Fender, my boss asked me to install this thing, can you help me ? |
15:37.02 | Corydon76-dig | zoa: I think we could make you up in drag at Astricon... |
15:37.02 | *** join/#asterisk chuckz (~lechuck@static-217-133-45-63.clienti.tiscali.it) |
15:37.18 | ESCulapio__ | thanks |
15:37.23 | southtel_ | D-Fender: We've had the issue accross the spectrum, landline, voip, mobile. |
15:37.24 | Dorothy | as long as i dont have to shave my legs |
15:37.26 | [TK]D-Fender | Dorothy: BTW... he's serious.... |
15:37.50 | [TK]D-Fender | southtel_: What card? |
15:38.00 | southtel_ | 410. |
15:38.02 | Corydon76-dig | zoa: do you object to shaving your arms and fingers? |
15:38.13 | [TK]D-Fender | southtel_: :/ worst of the bunch |
15:38.17 | Dorothy | ok i need to watch out more what i say |
15:38.20 | [TK]D-Fender | southtel_: What EC ? |
15:38.31 | [TK]D-Fender | southtel_: Try changing routines |
15:38.34 | southtel_ | D-Fender: Really? I thought that it was the newer of the hardware? |
15:38.50 | Corydon76-dig | zoa: YOU'RE the one who made up Asstricks Inside stickers... |
15:38.57 | southtel_ | D-Fender: Will do. We're using mc2 now. |
15:39.04 | [TK]D-Fender | southtel_: Wait, thats TDM410, not TE410? |
15:39.23 | southtel_ | TDM410. |
15:39.35 | [TK]D-Fender | southtel_: Try the various built-in, then get HPEC if you can. Then try OSLEC. |
15:39.52 | southtel_ | Roger, will do. |
15:40.01 | [TK]D-Fender | southtel_: If your card is warranteed then you can get HPEC free |
15:40.22 | [TK]D-Fender | steps out for lunch |
15:43.35 | Trixboxer | Hi, anyone have a SIP dialer for windows which works good and ready to rebrand ? Please pm or advice |
15:43.46 | evilbit | is it possible to use SetVar per user in voicemail.conf? |
15:44.31 | Katty | Trixboxer: i like zoiper, but i am unsure if it's a brandable product. you might give them a ring. |
15:45.01 | *** join/#asterisk aidinb (~Aidin@unaffiliated/aidinb) |
15:45.01 | Trixboxer | Katty, Thanks for hint :) |
15:45.15 | Dorothy | <- works for zoiper |
15:45.27 | Dorothy | Corydon76-dig, i have nothing to do with that :) |
15:45.44 | Katty | Dorothy: cheers. lovely product ya'll have (= |
15:45.54 | Katty | Dorothy: pass my compliments along to the folks who worked their tail off making it. |
15:46.30 | zoa | thanks! |
15:46.36 | zoa | sec, im on the phone |
15:46.55 | *** join/#asterisk dailylinux (~terst@s21-00210.dsl.no.powertech.net) |
15:47.37 | Katty | well time to get my new tire. laters |
15:47.39 | Katty | poofs |
15:49.32 | *** join/#asterisk verywiseman (~khaled@unaffiliated/verywiseman) |
15:51.28 | evilbit | anyone know about SetVar with voicemail.conf? Tried several different things with no luck |
15:52.05 | zoa | how do you mean evilbit ? |
15:52.21 | *** join/#asterisk seanjohn (~seanjohn@gateways.sheltoncomputers.com) |
15:52.43 | evilbit | I'd like to set the callerid per user... so if they call in from their cellphone we use that number instead of our did when they make a call outbound via voicemail |
15:52.52 | kl4m | There's no dialplan in voicemail.conf |
15:53.08 | evilbit | you can do it via SetVar in sip.conf but it doesn't seem to work in voicemail.conf |
15:53.18 | FlashDeluxe | Hi@all! I get this error http://paste.debian.net/81816/ Can anybody help me? |
15:53.48 | zoa | you cant do such thing in voicemail.conf |
15:53.48 | b11d` | flash.. im having that same problem w/ a fractional PRI |
15:54.09 | b11d` | on a Sangoma card |
15:54.32 | FlashDeluxe | mhh sucks, right?^^ |
15:54.33 | b11d` | why are you rocking D channel on channel 3? who does that? |
15:54.52 | FlashDeluxe | thats default |
15:54.56 | b11d` | no its not |
15:55.00 | b11d` | d chan default is 24 |
15:55.04 | WIMPy | bri? |
15:55.11 | b11d` | oh shit, dunno about BRI.. sorry |
15:55.13 | FlashDeluxe | its bri, yes |
15:55.26 | WIMPy | And otherwise I'd call 15 default. |
15:55.56 | FlashDeluxe | no prob but my big problem ist the error app_dial.c:1747 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 34 - Circuit/channel congestion) |
15:56.08 | b11d` | yeah thats caused by having no working D channel |
15:56.17 | FlashDeluxe | the d channel problem could be a cable problem, ill test that monday |
15:56.27 | b11d` | whats the telco say? |
15:56.27 | FlashDeluxe | u sure? |
15:56.32 | b11d` | yeah im positive |
15:56.50 | b11d` | i have that same error on a PRI.. due to not having a working D channel |
15:56.51 | FlashDeluxe | i`ve got an older asterisk system and there everything works |
15:56.56 | WIMPy | No calls without signalling. That's for sure. |
15:57.04 | b11d` | whats the telco say> |
15:57.17 | b11d` | you make sure the BRI still isnt in a loopback mode or a test mode or anything? |
15:57.42 | FlashDeluxe | i ve no idea how to test that |
15:57.48 | b11d` | you dont.. the telco does |
15:57.56 | b11d` | you HAVE called your telco, right? |
15:58.18 | FlashDeluxe | no, because i have the same card at the same line working on an asteris 1.2 |
15:58.28 | b11d` | gotcha.. missed that |
15:58.32 | FlashDeluxe | i made a newer system on xen |
15:58.52 | *** join/#asterisk af_ (~getsmart@78.134.21.122) |
15:59.21 | *** join/#asterisk KavanS (~KavanS@unaffiliated/kavans) |
15:59.30 | b11d` | good luck FlashDeluxe.. im heading out for lunch |
15:59.32 | b11d` | ttyl |
15:59.42 | *** join/#asterisk bakermd (~bakermd@66.117.118.34) |
16:00.04 | *** join/#asterisk jtodd (xigowbdz05@asterisk/community-director-and-tie-dye-shirt-lover/jtodd) |
16:00.04 | *** mode/#asterisk [+o jtodd] by ChanServ |
16:00.05 | WIMPy | FlashDeluxe: YOu mentioned the possibility of a cabling problem. Have you tried the old setup? |
16:00.09 | bakermd | Anyone have a compiled app_nv_faxdetect.so for 1.6.2.10 32bit? |
16:00.19 | FlashDeluxe | thanky b11d |
16:00.34 | FlashDeluxe | what do you mean with the old setup? |
16:00.42 | *** join/#asterisk gandhijee (akp@ip67-152-15-148.z15-152-67.customer.algx.net) |
16:01.03 | FlashDeluxe | i was asterisk 1.2 and zaptel, now its asterisk 1.6 with dahdi |
16:01.16 | *** join/#asterisk Deathvalley122 (~Death@unaffiliated/deathvalley122) |
16:01.23 | FlashDeluxe | so its not possible to take this configs |
16:01.31 | FlashDeluxe | but i took the same cable/card |
16:02.27 | WIMPy | Is it on the same or another system? |
16:03.34 | FlashDeluxe | other hardware |
16:03.46 | FlashDeluxe | maybe a crossed cable will help |
16:03.56 | FlashDeluxe | but i have no crossed cable here^^ |
16:04.43 | WIMPy | To connect to an NT you would usually need a straight cable, like any ethernet patch cable. |
16:07.19 | bakermd | Anyone use nv_faxdetect on 1.6? |
16:08.09 | *** join/#asterisk aidinb (~Aidin@unaffiliated/aidinb) |
16:08.13 | FlashDeluxe | found a cable |
16:09.03 | FlashDeluxe | same error |
16:09.57 | WIMPy | Are you getting interrupts from the card? |
16:10.04 | *** join/#asterisk TSM (~the_softw@78-105-6-158.zone3.bethere.co.uk) |
16:11.17 | FlashDeluxe | how can i check that? |
16:11.43 | WIMPy | cat /proc/interrupts |
16:12.34 | FlashDeluxe | mhh what should i get there? |
16:13.06 | FlashDeluxe | this is the output http://paste.debian.net/81828/ |
16:14.02 | WIMPy | I see vzaphfc. Do you have both zaptel and dahdi installed? |
16:14.19 | WIMPy | Looks like it's mixed up. |
16:14.29 | *** join/#asterisk TSM2 (~the_softw@78-105-6-158.zone3.bethere.co.uk) |
16:15.04 | FlashDeluxe | no its quite the same |
16:15.10 | FlashDeluxe | dahdi wouldnt work without it |
16:15.49 | *** join/#asterisk thansen (~thansen@c-98-202-28-239.hsd1.ut.comcast.net) |
16:16.26 | WIMPy | I'm pretty sure dahdi will not work with any zaptel drivers. You'd better remove anything zaptel related. |
16:16.48 | FlashDeluxe | i made this installation with tzafrir_laptop |
16:17.00 | WIMPy | Hmm. ok. |
16:17.17 | WIMPy | Looks very strange to me, but he might know better. |
16:17.23 | *** join/#asterisk aidinb (~Aidin@unaffiliated/aidinb) |
16:18.14 | WIMPy | I didn't have luck with dahdi and hfc so far, but guess that will change with 1.8. |
16:18.28 | FlashDeluxe | i know, that i do not know better^^ but everything is fine except this error |
16:18.38 | FlashDeluxe | hopefully^^ |
16:18.49 | FlashDeluxe | i tried with misdn and it was horrible |
16:19.16 | WIMPy | That doesn't work any more. But misdn2/lcr works very well. |
16:19.30 | FlashDeluxe | yes, i meant that |
16:19.46 | FlashDeluxe | didnt work for me |
16:20.03 | WIMPy | What happened? |
16:20.39 | FlashDeluxe | i think...now in this second i know where the problem has been |
16:20.40 | FlashDeluxe | ^^ |
16:20.49 | FlashDeluxe | sh*t |
16:21.09 | FlashDeluxe | but i heard that misdn v2 and lcr is not compatible with ptp so far? |
16:21.39 | FlashDeluxe | the problem was, that xen made a read-only on the card, so after passing through, misdn couldn grap it |
16:21.57 | WIMPy | I have to admit, I never checked. |
16:22.34 | FlashDeluxe | mhh |
16:22.44 | FlashDeluxe | i think i will go home now^^ |
16:22.52 | FlashDeluxe | its weekend and i need beer :D |
16:23.24 | WIMPy | No there is a ptp entry in the sampe config. |
16:23.41 | FlashDeluxe | that doesnt mean that it works, huh? |
16:23.45 | WIMPy | s/sampe/sample/ |
16:24.22 | FlashDeluxe | i know, as is said i thought it was the problem, but my xen settings and pci passthrough was the problem |
16:24.29 | WIMPy | No, but I'm pretty sure it wouldn't be a configuration option if it didn't work. After all it's not that much of a difference. |
16:24.38 | FlashDeluxe | i guess.. |
16:24.52 | WIMPy | At least not if you have NT mode support. |
16:25.04 | WIMPy | And that works. |
16:25.48 | FlashDeluxe | i have both |
16:25.53 | FlashDeluxe | TE and NT |
16:26.56 | FlashDeluxe | i will continue on monday |
16:27.01 | FlashDeluxe | now -->beer |
16:27.11 | FlashDeluxe | ave a nice weekend! |
16:27.32 | *** join/#asterisk anonymouz666 (~anonymouz@187-28-37-118.poolip.RJO.embratel.net.br) |
16:27.38 | WIMPy | Na dann prost :-) |
16:28.00 | FlashDeluxe | danke^^ |
16:28.06 | FlashDeluxe | bis nächste woche dann |
16:28.42 | anonymouz666 | do I join the right channel? :) |
16:28.54 | anonymouz666 | did I |
16:30.56 | Corydon76-dig | Nein |
16:34.24 | WIMPy | :-) |
16:35.17 | anonymouz666 | german cars are the best |
16:35.51 | KavanS | ok, for companies that have people use a SIP phone from their home office - what type of legal implications does that have for a business? (yes I know, talk to a lawyer, just wanted to find out what other companies are doing) |
16:35.57 | KavanS | i.e. 911 dialed from home |
16:36.18 | anonymouz666 | but you guys need to take care... some companies from asia is offering more paying less :) |
16:37.29 | raden_work | anonymouz666, what does any of that have to do with asterisk |
16:37.53 | anonymouz666 | wel... doing a good job with asterisk you can buy a german car :-) |
16:38.08 | raden_work | ha ha |
16:39.37 | Corydon76-dig | KavanS: always treat RTP conversations over the open Internet as if the entire world could hear your conversation, including your competitors and enemies |
16:39.50 | KavanS | Corydon76-dig, roger that, ipsec helps with that |
16:39.58 | anonymouz666 | SRTP helps too |
16:40.29 | KavanS | Corydon76-dig, do you think it's a legitimate to block 911 from offsite voip phones? (with appropriate legal framework) |
16:40.46 | KavanS | if we allow it - the risk is higher that someone could dial 911 and then emergency services shows up at the wrong address |
16:40.52 | Corydon76-dig | KavanS: that question can only be answered by YOUR lawyer |
16:41.20 | KavanS | right |
16:41.43 | KavanS | I'm asking what other organizations are doing to mitigate this - so I can be informed BEFORE I talk to my lawyer |
16:42.38 | *** join/#asterisk Tim_Toady (~moi@178.128.17.211.dsl.dyn.forthnet.gr) |
16:42.41 | Corydon76-dig | One option is to have a landline POTS connection from every location from which you permit SIP calls |
16:42.49 | sogi | Error loading module 'app_fax.so': /usr/lib/asterisk/modules/app_fax.so: undefined symbol: t30_set_tx_page_header_info |
16:42.53 | Corydon76-dig | and 911 is routed to go over that landline |
16:42.55 | sogi | who can help me with it? |
16:42.55 | *** join/#asterisk bipolar (~bipolar@offsitesysadmin.com) |
16:42.57 | sogi | asterisk 1.6 |
16:43.06 | anonymouz666 | sogi: looks like a lib mismatch |
16:43.22 | Corydon76-dig | KavanS: blocking 911 is rarely a good option from a liability standpoint |
16:43.27 | sogi | which lib |
16:43.35 | Corydon76-dig | KavanS: but if you can reroute it... |
16:43.41 | sogi | spandsp? |
16:43.51 | anonymouz666 | sogi: it seems |
16:44.24 | sogi | hm |
16:44.47 | KavanS | Corydon76-dig, roger that - thank you for the tips - will be discussing this next week |
16:44.58 | KavanS | a bit more research on google might help |
16:45.05 | kn0x | anyone familiar with generating a modulated tone (for a recording, not Playtones() ) |
16:45.40 | Corydon76-dig | KavanS: if you have mobile users, then ensuring that their phone does not look like a phone (i.e. a softphone on a laptop) will mitigate some of those concerns |
16:46.15 | Corydon76-dig | KavanS: Generally speaking, if it looks like a phone, it should probably handle 911 correctly. |
16:46.53 | WIMPy | Back to those hamburger or Mickey Mouse phones? :-) |
16:47.04 | KavanS | lol |
16:47.12 | KavanS | ok, roger that Corydon76-dig |
16:47.19 | *** join/#asterisk n0tk (~n0tk@216.160.42.30) |
16:48.51 | *** join/#asterisk citywok (~chatzilla@67-134-194-33.dia.static.qwest.net) |
16:52.22 | *** join/#asterisk zane93 (~zane93@pool-173-74-1-202.dllstx.fios.verizon.net) |
16:52.45 | *** part/#asterisk zane93 (~zane93@pool-173-74-1-202.dllstx.fios.verizon.net) |
16:52.48 | *** join/#asterisk zane93 (~zane93@pool-173-74-1-202.dllstx.fios.verizon.net) |
16:54.49 | *** join/#asterisk richardf (~savag3@173.116.124.202.static.snap.net.nz) |
16:56.26 | *** part/#asterisk seanjohn (~seanjohn@gateways.sheltoncomputers.com) |
16:59.44 | *** join/#asterisk dkirker-openmobl (~dkirker@openmobl/ceo/dkirker) |
17:10.47 | Katty | ALLO LOVABLES. |
17:10.57 | anonymouz666 | hi kaldemar |
17:11.00 | anonymouz666 | hi Katty |
17:11.06 | Qwell | hi Qwell |
17:11.08 | Kobaz | yays |
17:11.16 | Kobaz | yeah hi qwell |
17:11.46 | zoa | hey hey katty |
17:12.36 | raden_work | hugs Katty , MOrning :) |
17:13.38 | anonymouz666 | it is afternoon after lunch |
17:13.39 | anonymouz666 | friday |
17:13.52 | anonymouz666 | i want to go home and enjoy the weekend |
17:14.16 | anonymouz666 | and stay far away from app_queue and CDR's |
17:14.29 | zoa | ha |
17:14.31 | zoa | i hate that thign |
17:14.33 | zoa | app_queue |
17:14.34 | zoa | brrrr |
17:14.38 | Katty | hugs anonymouz666 |
17:14.41 | Katty | hugs Qwell |
17:14.46 | Katty | hugs Kobaz |
17:14.49 | Katty | hugs raden_work |
17:14.54 | Katty | zoa: do we hug? |
17:15.06 | *** join/#asterisk aidinb (~Aidin@unaffiliated/aidinb) |
17:15.29 | zoa | let me find my deo first |
17:15.37 | zoa | ok, im ready! |
17:15.40 | Katty | k |
17:15.43 | Katty | READY SET HUG |
17:15.45 | Katty | hugs zoa |
17:15.49 | zoa | Whaaaaaaaa |
17:15.52 | zoa | naaaaaise |
17:16.16 | zoa | katty be sure to check your privmsg |
17:16.29 | anonymouz666 | zoa: "hate" is too strong. it's just doesn't work the right way sometimes. |
17:16.33 | Katty | zoa: i did. |
17:16.59 | Katty | zoa: or, more like, i saw. |
17:17.02 | zoa | oki :) |
17:17.09 | Katty | zoa: shanks. |
17:17.40 | Katty | so what's everyone up to this friday afternoon |
17:17.42 | zoa | now whats for dinner ? |
17:17.49 | Katty | as of right now, no clue. |
17:17.52 | zoa | afternoon, it's almost bed time |
17:17.57 | Katty | oh. |
17:18.08 | Katty | germany? |
17:18.10 | Katty | or further east |
17:18.11 | anonymouz666 | zoa: don't speed up our time :D |
17:18.24 | Katty | cause it's only 7 in britan |
17:18.31 | Katty | zoa: down under? |
17:18.56 | Katty | surely not, i think au is 18 hours ahead of me. |
17:20.06 | Katty | Qwell: where did jbot go |
17:20.08 | Katty | Qwell: erm, infobot |
17:20.26 | *** join/#asterisk scalex000 (~chatzilla@186.6.51.182) |
17:20.31 | scalex000 | hello |
17:20.33 | zoa | bulgaria today |
17:20.44 | zoa | its 8pm here |
17:20.48 | zoa | and im tired |
17:20.52 | Katty | ohisee. |
17:20.52 | zoa | and want to sleep |
17:20.55 | Katty | scalex000: OHAI |
17:20.58 | Katty | zoa: go nap. |
17:21.04 | Katty | zoa: also, what are you doing in bulgaria |
17:21.06 | zoa | i dont like to sleep on my office keyboard |
17:21.27 | scalex000 | guy have u setup 2 asterisk using iax? and from 1 side lost the ip address on 30 minutes |
17:21.40 | Katty | scalex000: i usually see that in natting. |
17:21.45 | scalex000 | yes |
17:21.49 | zoa | scalex000: i dont understand the question too well |
17:21.58 | Katty | scalex000: but i'm not currently running to asterisk boxes with iax |
17:22.21 | *** join/#asterisk aidinb (~Aidin@unaffiliated/aidinb) |
17:22.38 | scalex000 | I have 2 asterisk box using iax to connect each other |
17:22.41 | Qwell | Katty: he's DocScrutinizer_ O.o |
17:22.58 | scalex000 | but, I think have problem using NAT in one side |
17:23.33 | scalex000 | on 30 minutes the asterisk box is behind NAT lost the ip address from asterisk box is not using NAT |
17:23.33 | Katty | Qwell: is that something like dr. suess at the office? |
17:23.49 | Qwell | Katty: got me. he did a /nick earlier though |
17:23.54 | Qwell | ~katty |
17:23.55 | DocScrutinizer | [katty] the only girl in the channel, so be nice to her |
17:23.56 | Qwell | see? |
17:24.14 | Katty | OH |
17:24.25 | Katty | that went over my ears. |
17:24.37 | zoa | how can it forget the ip from the asterisk box that is not using nat ? |
17:24.40 | zoa | i dont get it |
17:25.28 | scalex000 | I dont know |
17:25.31 | raden_work | if i have nat=yes why does sip show peers show nat N |
17:25.46 | Qwell | raden_work: because "N" = NAT |
17:25.57 | scalex000 | principal (Unspecified) (D) 255.255.255.255 0 (E) Unmonitored |
17:26.04 | raden_work | Qwell, gotcha i thought it meant like NO |
17:26.20 | scalex000 | when I use iax2 show peers |
17:26.20 | raden_work | Make more sense if NAT Y |
17:26.22 | raden_work | for YES |
17:26.36 | Katty | i agree. that is a smidgen confusing |
17:27.04 | scalex000 | Qwell, is strange for me why this happen |
17:27.14 | raden_work | I can understand there logic, but for someone to interpret it without knowing would leave most to believe it means NAT = NO |
17:27.23 | Katty | s/there/their/ |
17:28.06 | n0tk | I just installed a TDM400P on a via ITX motherboard with latest ubuntu 10.04 and its doing the same damn thing, it complains about a soft lock after it gets not very far in the boot process. I've added acpi=off and noapic kernel parameters but still no go. And NO I can't try another PCI slot, there's only on on this motherboard. I've disabled everything IN bios including the network cards the only interrupts left are the hard drive and the TDM400P. I have |
17:28.06 | n0tk | <PROTECTED> |
17:28.07 | raden_work | LOL thanks Katty |
17:28.41 | Kobaz | n0tk: try a different kernel |
17:28.44 | n0tk | did they change the kernel parameters related to interrupt sharing in the 2.6.32 kernel ? |
17:28.45 | Katty | n0tk: have you tried a different TDM card? |
17:28.58 | n0tk | I've tried three different TDM cards with the same results |
17:29.01 | raden_work | Gotta GO |
17:29.03 | Katty | mkay. |
17:29.04 | raden_work | later all :) |
17:29.06 | Katty | raden_work: buhbye |
17:29.13 | Kobaz | n0tk: different kernel |
17:29.19 | raden_work | buhbye Katty |
17:29.22 | n0tk | I've tried previous kernels but they work for a while then lock up about 3 times per day |
17:29.23 | Katty | yeah i would try a different kernel next too |
17:29.26 | raden_work | back in a few hours |
17:29.27 | *** join/#asterisk nix8n82 (~nate@63.162.27.14) |
17:29.35 | Katty | do you have another motherboard? |
17:29.41 | Kobaz | n0tk: sounds like a motherboard problem |
17:29.46 | n0tk | I've tried three different motherboards and the same fucking thing |
17:29.51 | Katty | nods |
17:29.51 | n0tk | I've tried everything |
17:29.53 | Kobaz | power supply? |
17:29.58 | Katty | ram? |
17:30.05 | n0tk | yes, I've tried three different power supplied |
17:30.09 | Katty | proc? |
17:30.11 | n0tk | tried three different hard drives |
17:30.24 | Kobaz | cpu? |
17:30.24 | n0tk | the PROC is soldered to the motherboard on two of the three boards I've tried |
17:30.26 | Katty | might call digium (= |
17:30.30 | Qwell | n0tk: ^^ |
17:30.31 | n0tk | its not the fucking computer, its the card |
17:30.32 | Katty | soldered?! |
17:30.39 | Kobaz | Katty: sff machine |
17:30.48 | n0tk | two of them are via ITX |
17:30.53 | Katty | statement does not parse. indexes missing |
17:31.10 | scalex000 | Katty, see this settings http://pastebin.com/6qaFqZgm |
17:31.12 | Katty | n0tk: at this point i'd just stop pulling your hair out and call digium. |
17:31.16 | Kobaz | Katty: small form factor... like a mini motherboard with a via soldered on or something |
17:31.26 | n0tk | digium doesn't provide support, I've had the cards too long |
17:31.26 | drmessano | Did you reboot, 3 times, like I requested? |
17:31.40 | Kobaz | three times, spin around, and throw salt |
17:32.00 | n0tk | I think I'm going to send these TDM cards to them with some white powder in the box |
17:32.09 | Kobaz | n0tk: is there a pci resource reset option in the bios |
17:32.10 | WIMPy | Flick the power switch as fast as you can for 30 seconds? |
17:32.10 | Katty | n0tk: they provide support (= |
17:32.23 | malcolmd | Katty: actually, for the TDM400 cards, we don't. they're EOL |
17:32.25 | n0tk | yes, I've tried resetting the acpi |
17:32.32 | Katty | malcolmd: ahh, i see. |
17:32.33 | [TK]D-Fender | scalex000: Stop registering and jsut put the HOST as the IP. |
17:32.37 | malcolmd | for the TDM410 cards yes, but TDM400's sunsetted |
17:32.43 | Kobaz | n0tk: ebay |
17:32.55 | n0tk | no kidding, I have one of them on ebay as we speak |
17:32.58 | Katty | n0tk: might contact Asteria then |
17:32.59 | drmessano | I'll buy all 3 for $25 |
17:33.03 | drmessano | DM for Paypal info |
17:33.08 | n0tk | no thanks |
17:33.09 | Katty | i think |
17:33.15 | Katty | Qwell: is at asteria? |
17:33.15 | Kobaz | 25.50 |
17:33.16 | scalex000 | TK, is not necessary |
17:33.16 | n0tk | tell me, are there alternatives to the tdm400? |
17:33.17 | zoa | i think its a mainboard problem |
17:33.18 | drmessano | $27.50? |
17:33.23 | Qwell | Katty: huh? |
17:33.25 | Katty | Qwell: who does josh work for |
17:33.27 | Katty | Qwell: twisted |
17:33.28 | Kobaz | 27.50234231 |
17:33.35 | drmessano | 27 = Pi |
17:33.38 | drmessano | errr |
17:33.40 | drmessano | 27 + Pi |
17:33.42 | zoa | asteria |
17:33.44 | Qwell | probably asteria still. what does that have to do with anything though? O.o |
17:33.53 | malcolmd | n0tk: tdm410 |
17:33.55 | Kobaz | 27 + piR^2 |
17:33.55 | Katty | n0tk might be able to get help from them |
17:33.59 | n0tk | how can it be a mainboard problem when I've tried three systems that work fine until I put them in the slot? |
17:34.06 | n0tk | does the tdm410 support irq sharing? |
17:34.12 | zoa | the mainboard doesnt like the card |
17:34.17 | zoa | i dont think it does |
17:34.22 | Katty | n0tk: do you want asteria's phone number? |
17:34.24 | zoa | keep the irq reserved for it |
17:34.50 | drmessano | Maybe that mainboard is a shit design and won't work with that card due to retarted interrupt usage? |
17:34.52 | n0tk | i'll keep messing with it, but this is costing me allot of money |
17:34.57 | n0tk | its not the fucking mainboard |
17:35.01 | zoa | try a different mainboard |
17:35.07 | zoa | i doubt you have 3 broken cards |
17:35.13 | drmessano | Try a different MODEL mainboard |
17:35.16 | n0tk | I've tried three different mainboards |
17:35.20 | *** join/#asterisk nettie (~nettie@94.167.69.10) |
17:35.21 | Katty | n0tk: it would be more cost affective to just contact someone with a lot of experience and learn what they did to resolve it than chasing your tail around. |
17:35.24 | n0tk | I've tried two different model mainboards |
17:35.30 | zoa | so 2 models of mainboard |
17:35.33 | n0tk | that's why I'm here Katty |
17:35.34 | zoa | 3 different cards |
17:35.38 | zoa | and different kernels ? |
17:35.45 | Katty | ah, i see. |
17:35.45 | zoa | what other cards do you have in there ? |
17:35.49 | Katty | well good luck (= |
17:35.55 | n0tk | none, that's it |
17:35.59 | n0tk | just the tdm card |
17:36.09 | n0tk | everything is disabled in bios |
17:36.12 | zoa | is the card sharing an irq ? |
17:36.13 | n0tk | accept the ide controller |
17:36.18 | drmessano | Do the cards have FXS ports? |
17:36.23 | n0tk | I don't know because the system locks up |
17:36.30 | zoa | it locks up immediately ? |
17:36.30 | n0tk | I have three fxs and one fxo |
17:36.31 | zoa | wow |
17:36.40 | drmessano | n0tk: Get a bigger power supply |
17:36.51 | n0tk | it locks up in the middle of the kernel boot process |
17:36.56 | n0tk | at the same point all the time |
17:36.59 | Qwell | drmessano: wouldn't supply power to the cards until the modules are loaded, I don't think |
17:37.02 | scalex000 | ok |
17:37.05 | drmessano | Could be dropping the BUS voltage enough that it wont boot |
17:37.08 | n0tk | and there's no wctdm driver installed yet |
17:37.10 | zoa | what happens if you remove the modules ? |
17:37.16 | zoa | aha |
17:37.22 | Qwell | you could also just unplug the molex. thats much easier. |
17:37.23 | n0tk | aha? |
17:37.23 | scalex000 | TK, I will watch if not disconnect, thank u |
17:37.44 | Qwell | (unless it's one of those super evil tight molex connectors. god I hate those) |
17:37.48 | n0tk | I haven't tried removing the modules |
17:37.59 | n0tk | that sounds crazy |
17:38.02 | n0tk | but I'll try it |
17:39.07 | drmessano | Do that and see what happens |
17:39.14 | drmessano | SFF being my issue here |
17:39.31 | Tim_Toady | nt0k propably its a kernel issue, try playing with some kernel parameters like acpi_irq* you can find them here : http://www.mjmwired.net/kernel/Documentation/kernel-parameters.txt |
17:39.33 | Qwell | VIA is rather dumb sometimes |
17:39.55 | Tim_Toady | if i was you i would try something different than ubuntu, maybe debian or centos |
17:40.07 | Tim_Toady | ubuntu kernel are well known to have issues with many boards |
17:40.17 | Tim_Toady | kernels* |
20:09.23 | *** join/#asterisk infobot (~infobot@rikers.org) |
20:09.24 | *** topic/#asterisk is Asterisk: The Open Source PBX and Telephony Platform (asterisk.org) -=- Asterisk 1.8.0-beta1 (2010/07/23), 1.6.2.10 (2010/07/23), 1.4.34 (2010/07/23), *-Addons 1.6.2.1, 1.4.11 (2010/04/15), dahdi-linux 2.3.1 (2010/05/25), dahdi-tools 2.3.0 (2010/04/13), libpri 1.4.11.3 (2010/06/29) -=- Related channels: #asterisknow,#switchvox,#freepbx,#asterisk-dev,#asterisk-bugs |
20:11.55 | *** join/#asterisk philipp64|laptop (~chatzilla@75-92-150-245.war.clearwire-wmx.net) |
20:12.26 | b11d` | anyone know of a good DVI/VGA USB/PS2 KVM? |
20:12.42 | b11d` | preferably 4-port+head |
20:14.37 | *** join/#asterisk sgimeno (~chatzilla@95.122.11.99) |
20:17.00 | b11d` | why do all the vendors I want to deal with NOT accept purchase orders |
20:17.07 | b11d` | who wouldnt accept a purchase order from the State of Minnesota? |
20:17.10 | b11d` | its guaranteed! |
20:17.41 | zxvff | i'll accept one |
20:17.42 | b11d` | dont accept purchase orders? I can't do business with you.. |
20:17.44 | b11d` | :) |
20:17.55 | sogi | hehe |
20:17.57 | sogi | me too |
20:18.00 | b11d` | buy me a couple of these, then bill me |
20:18.10 | Qwell | b11d`: because accepting purchase orders from a government is much more than just processing a payment |
20:18.24 | sogi | hm |
20:18.41 | sogi | US and your card processing things... |
20:18.48 | b11d` | http://www.kvmgalore.com/shopping/category.php?category_id=4230&group_id=50&category_name=AdderView+PRO |
20:18.56 | sogi | in EU i make invoice and then waiting |
20:18.57 | sogi | :D |
20:19.10 | citywok | rather than use a KVM, get servers with build in managemnt :P |
20:19.16 | citywok | iLo is 100000x better than a stupid kvm |
20:19.19 | sogi | if somebody is not serious to pay, then... |
20:19.21 | b11d` | its for PC repair |
20:19.22 | b11d` | not servers |
20:19.56 | citywok | ahhh, for a workbench. gotcha. for that i get lazy and end up ditching the kvm after a week and just plug straight in. lol. though i never have to work on more than a machine or two or three at a time |
20:20.26 | b11d` | this is a school, we end up with a half-full repair bench most of the time |
20:20.51 | KavanS | b11d`, shit yeah - companies that don't accept PO's are retarded |
20:20.55 | b11d` | its hard to find a KVM that has both DVI and VGI and both PS2/USB |
20:21.04 | zxvff | only time i ever really appreciated a KVM was when i was working for a hospital in the middle of a PC refresh and was imaging 32 PCs at a time |
20:21.06 | b11d` | I agree KavanS.. whats up with that anyways |
20:21.08 | zxvff | at that point you appreciate a KVM |
20:21.30 | zxvff | we had a 48 port one |
20:21.42 | b11d` | dang |
20:21.46 | b11d` | thats a lot of friggin cables |
20:21.58 | zxvff | it was an entire wall |
20:22.09 | sogi | :DD |
20:22.17 | citywok | we imaged our labs in place |
20:22.37 | citywok | set up all the PC's, walk around with a boot CD, hit go on the image server and image everything at once |
20:22.43 | b11d` | imaging is so year 2000.. we dynamically build our images and use our app deployment software to handle the rest |
20:22.45 | KavanS | b11d`, a PO from a state institution should be considered legal tender IMO |
20:22.50 | b11d` | that would be nice! |
20:23.21 | *** join/#asterisk jmacz (~jmacz@190.144.75.22) |
20:23.25 | *** join/#asterisk uqlev (~yuriy@91.184.221.31) |
20:24.03 | citywok | imaging is foolproof. app deployment doesnt always work like it should. |
20:24.22 | b11d` | works fine for me |
20:24.28 | b11d` | 18 months now, no problems |
20:25.35 | zxvff | lol computers |
20:26.36 | b11d` | im all OSS on the backend too |
20:26.47 | b11d` | samba 4 emulating a windows 2008 AD controller, WPKG for app deployment.. |
20:29.23 | b11d` | ahh sweet, L-COM carries these KVMs.. they accept POs |
20:29.32 | b11d` | it'll be overpriced, but I can get them :) |
20:30.35 | *** part/#asterisk LemensTS (~LemensTS@adsl-70-238-154-222.dsl.stlsmo.sbcglobal.net) |
20:35.39 | *** join/#asterisk chazzam (~chazz@173-24-237-15.client.mchsi.com) |
20:38.50 | *** join/#asterisk Cain (~Geek@unaffiliated/cain) |
20:39.03 | *** join/#asterisk oej (~olle@79.138.217.155.bredband.tre.se) |
20:39.34 | gandhijee | b11d`: why not just get a KVM that has DVI and supports DVI-A? |
20:39.46 | b11d` | whats DVI-A? |
20:40.06 | gandhijee | DVI-analog |
20:40.18 | gandhijee | so you can use the DVI to vga converters |
20:40.20 | b11d` | i guess I dont know what you mean .. sorry |
20:40.22 | b11d` | ohhh ok |
20:40.24 | b11d` | the adapters |
20:40.32 | gandhijee | da |
20:40.33 | b11d` | hmmm.. yeah I could do that, why not |
20:41.03 | gandhijee | its only a pain if everything you have is DVI-D and the monitors/LCD's are DVI-D |
20:41.40 | gandhijee | its t.38 gateway mode supported in asterisk? |
20:42.22 | Katty | hhhhhellllooooooooooooooooo nurse. |
20:57.17 | *** join/#asterisk dailylinux (~test@s21-00210.dsl.no.powertech.net) |
21:07.37 | *** join/#asterisk hfb (~hfb@96.247.66.242) |
21:09.07 | Katty | wtb rollaids. |
21:09.29 | Qwell | all mine are unrolled |
21:10.12 | Katty | mmmm, calcium carbonate and magnesium hydroxide. |
21:10.20 | Katty | MmMmmmmmm |
21:10.26 | Katty | omnomnomcherry |
21:12.03 | Katty | Qwell: do rolaids have side effects? of the adverse kind |
21:12.12 | Qwell | dunno |
21:12.37 | Katty | safe answer. |
21:12.45 | carrar | HI |
21:12.45 | *** join/#asterisk thansen (~thansen@c-98-202-28-239.hsd1.ut.comcast.net) |
21:12.48 | Katty | ohai :> |
21:12.51 | Katty | hugs carrar |
21:13.01 | carrar | guggles Kat back |
21:13.03 | carrar | err |
21:13.06 | carrar | huggles even |
21:13.07 | Corydon76-dig | You can save a buttload of money if you realize what the common name for calcium carbonate is... |
21:13.32 | Corydon76-dig | Katty: yes, Rolaids have side effects |
21:14.25 | Katty | chalk? |
21:14.27 | Katty | limestone? |
21:14.36 | Corydon76-dig | Katty: your stomach acid generally kills bacteria swallowed. When you neutralize that acid, the bacteria can get into your bloodstream more easily |
21:14.50 | Katty | oh. |
21:14.58 | Katty | well i'm on an antibiotic at the moment anyway |
21:15.23 | Corydon76-dig | Also, the reason the acid is in there is to make the enzymes in your stomach act a certain way. Neutralize the acid, and the enzymes are less able to digest your food |
21:15.51 | Katty | so i should go gnaw on a piece of limestone? |
21:16.02 | Qwell | Katty: eat pearls |
21:16.18 | Corydon76-dig | Katty: proton pump inhibitors are a much better solution |
21:16.47 | Katty | what is that |
21:16.49 | Corydon76-dig | i.e. prilosec (or generically, omeprazole) |
21:17.02 | Katty | yes yes they are, but i didn't take one this morning |
21:17.14 | Katty | was hoping i wouldn't have to |
21:17.18 | Corydon76-dig | It only takes about 30 minutes to take effect |
21:17.23 | Katty | they have me on uhhhh |
21:17.38 | Katty | omeprazole |
21:17.46 | Katty | 20mg |
21:17.57 | Corydon76-dig | You could also try crystallized ginger |
21:18.08 | Corydon76-dig | the "natural" way to relieve stomach aches |
21:18.08 | Katty | well if it's acid |
21:18.12 | Katty | would milk work? |
21:18.32 | Corydon76-dig | Ginger is what you want |
21:18.51 | Katty | i only have fresh ginger root |
21:18.57 | *** join/#asterisk Alagar (~Administr@122.164.32.226) |
21:19.01 | Katty | last time i checked it hadn't crystalized. |
21:19.05 | Corydon76-dig | Fresh would do it too |
21:19.23 | Corydon76-dig | Crystallization is a particular cooking process |
21:19.30 | Katty | elaborate |
21:19.44 | Corydon76-dig | crystallized ginger is sometimes considered a candy |
21:19.52 | Katty | oh, candied ginger? |
21:20.03 | Corydon76-dig | Right |
21:20.48 | Katty | what purpose does adding sugar to the ginger, and cooking it, serve? |
21:20.58 | Katty | just make it more...edible? |
21:20.58 | Corydon76-dig | You can usually get it in a grocery's spice aisle |
21:21.12 | *** join/#asterisk l337ingDisorder (~l337ingDi@S0106000c425431b2.gv.shawcable.net) |
21:21.15 | Corydon76-dig | Makes it more palatable |
21:21.43 | Katty | ah |
21:21.59 | Corydon76-dig | Ginger is already fully edible. The process is one which cooks and sweetens it |
21:22.11 | Katty | yeah i'm familiar with candied ginger |
21:22.27 | Corydon76-dig | Have any? |
21:22.33 | Katty | no, but i know how to make it |
21:22.50 | Corydon76-dig | It'll be faster to take omeprazole |
21:22.50 | Katty | you cover it with water, and simmer it for 30 minutes, then drain it and weigh the ginger |
21:23.07 | Katty | then add equal weight of sugar to the ginger, 3 T of water, and then cook some more |
21:23.18 | Corydon76-dig | Ginger on the stomach works nearly instantly |
21:23.32 | Katty | i will keep that in mind |
21:25.07 | Katty | how about milk? |
21:25.13 | Katty | it's, theoretically, a base |
21:26.00 | l337ingDisorder | Having a strange inbound calling issue. I've got outbound working fine, but when I call in from my cel I hear the phone ring once, then it seems like asterisk is picking up but instead of presenting the IVR I've set up, it says "The number you have dialed is not in service" |
21:27.18 | l337ingDisorder | I've set up DID 1 in the "Zap Channel DIDs" config page, and I've set up an incoming route using DID number 1, with the Destination set as the IVR i've configured |
21:27.28 | Qwell | l337ingDisorder: #freepbx |
21:27.54 | l337ingDisorder | Qwell: thanks |
21:30.32 | Katty | okay no more talking about rolaids. |
21:30.41 | Katty | i just started panicing over hiatal hernias |
21:31.23 | NEEDINGHELP123 | milk is a stomach liner kaldemar |
21:31.25 | NEEDINGHELP123 | katty* |
21:31.26 | Corydon76-dig | Katty: I have one of those |
21:32.07 | Katty | Corydon76-dig: don't tell me about it |
21:32.11 | Katty | Corydon76-dig: i don't want to have a panic attack |
21:32.32 | Katty | Corydon76-dig: Qwell will have to take my ass to ER |
21:32.59 | Corydon76-dig | Katty: I have one... and the gastroenterologist told me not to worry about it; it's not something I need to have fixed |
21:33.05 | Katty | k |
21:33.07 | carrar | yours is detachable? |
21:33.14 | Katty | of course. |
21:33.16 | Katty | isn't everyone's? |
21:33.21 | carrar | can be |
21:43.28 | b11d` | my wife is still at the E.R. for her "headache" |
21:43.32 | b11d` | what a bunch of crap |
21:43.37 | b11d` | they sent her home.. told her to drink more water |
21:43.45 | b11d` | well, are sending her home soon |
21:44.21 | ChannelZ | that's an expensive trip just to get out of having sexy times with you |
21:44.26 | b11d` | hahahahaha |
21:44.35 | b11d` | :) |
21:44.39 | ChannelZ | heh |
21:52.45 | carrar | keep a glass of water next to the bed |
22:06.01 | KavanS | oh snap |
22:07.56 | b11d` | so.. think its safe to cut a 6" round hole in a 12" joist? |
22:08.05 | b11d` | im thinking its fine.. but... |
22:08.07 | b11d` | hmmm |
22:09.43 | Corydon76-dig | b11d`: that depends upon the load |
22:10.01 | b11d` | its a floor joist |
22:10.07 | b11d` | inthe basement |
22:10.09 | b11d` | single floor home |
22:10.22 | Corydon76-dig | If they designed such that a 6" joist would have been fine, but they used a 12" just because they could, then it would be fine |
22:10.23 | b11d` | i think 4" might be my maximum |
22:10.32 | b11d` | gotcha.. no clue on that though |
22:10.44 | Corydon76-dig | Talk to a building engineer |
22:11.20 | Corydon76-dig | Generally, if you can avoid drilling into a joist, avoid it like the plague |
22:11.44 | Corydon76-dig | Is the joist below a load-bearing wall? |
22:11.49 | Corydon76-dig | or just a floor? |
22:11.54 | b11d` | no, its in the center of a floor |
22:12.19 | b11d` | i have a bathroom there, and want to get the vent (which goes nowhere now) to vent into the attic and out the roof |
22:12.24 | Corydon76-dig | What's the length of the joist between supports where the hole will be drilled? |
22:12.27 | b11d` | otherwise the moisture builds up |
22:12.42 | b11d` | 16 feet or so |
22:13.08 | b11d` | to a steel I-beam with joist holders.. |
22:13.36 | Corydon76-dig | You should be okay, but I accept no liability if I'm wrong |
22:13.40 | b11d` | if I can get a conduit over just one joist, I can run it up through my linen closet and through the old laundry chute |
22:13.42 | b11d` | nice and clean |
22:13.53 | b11d` | naturally Corydon76-dig.. :) I'll talk to some others too before I do it |
22:14.41 | Corydon76-dig | I'd actually suggest that you narrow the ducting so you don't need to drill through a joist at all |
22:15.02 | b11d` | i can narrow it to 4" but going under the joist is not an option |
22:15.32 | Corydon76-dig | Under the joist? |
22:15.41 | Corydon76-dig | I'm talking aside of the joist |
22:15.55 | b11d` | aside doesnt get me to where I need it to be |
22:16.34 | Corydon76-dig | Then change where you need it to be |
22:17.09 | b11d` | haha i've been over that a millin times.. gotta go through that linen closet, its the only route to the attic |
22:17.19 | b11d` | i gotta go.. thanks for the advice! |
22:17.22 | Qwell | b11d`: You have clearly never been to thereifixedit.com |
22:17.27 | *** join/#asterisk chuckz (~lechuck@93-40-134-145.ip38.fastwebnet.it) |
22:17.28 | b11d` | clearly ;) |
22:17.30 | Qwell | improvise! |
22:17.36 | Corydon76-dig | How about straight out the side of the house? |
22:17.45 | Qwell | ^ |
22:17.51 | b11d` | its brick.. never fucked with brick before :( |
22:18.02 | Corydon76-dig | Brick is easy |
22:18.14 | b11d` | ok, i really gotta go... we'll talk about brick next time :) |
22:18.24 | b11d` | thanks.. ttyl |
22:18.37 | Corydon76-dig | Hammer and mortar chisel |
22:20.56 | Corydon76-dig | Hammer drill... cuts through brick like butter... |
22:23.44 | Corydon76-dig | Assuming the butter was frozen at -270C |
22:26.09 | *** join/#asterisk tdiehl (~tdiehl@tigger.tntechs.com) |
22:27.43 | *** join/#asterisk andresm (~andresm@ubuntu/member/andresmujica) |
22:34.18 | *** join/#asterisk mpe (~mpe@0x4dd624b2.adsl.cybercity.dk) |
22:36.43 | *** join/#asterisk ricrc (~Rick@189.171.203.247) |
22:37.24 | *** part/#asterisk ricrc (~Rick@189.171.203.247) |
22:37.33 | *** join/#asterisk ricrc (~Rick@189.171.203.247) |
22:38.08 | ricrc | Anyone here good with TDM2400 Cards? |
22:42.41 | citywok | i have a couple sittong on a shelf if you need any :P |
22:43.42 | TJNII | Now there's a ringing endorsement. |
22:43.53 | TJNII | "Anyone know about these" "You want mine?" |
22:44.03 | citywok | lol. T1 cards replaced the TDM2400's before we went pure sip :) |
22:44.22 | citywok | it was all providing interop between * and our old digital inter-tel system |
22:45.01 | citywok | sadly we couldn't get rid of crosstalk between the channels on the TDM2400's (legit digium boards), even after repunching all of the wires. |
22:45.38 | TJNII | Did you rule out the cabling? |
22:53.24 | ricrc | I have an old card that seems to be having problems after thunderstorm yestrdy. |
22:53.46 | ricrc | Wish i could just throw it away, but its in prod system. |
22:54.07 | TJNII | Aah, I remember back when I was a kid we'd lose TVs and phones to thunderstorms on a fairly regular basis. |
22:54.20 | TJNII | Oh, and the stereo. |
23:10.21 | ricrc | Anyone have any idea why a TDM card could be dialing out perfectly, but failing misserably at picking up incoming calls? |
23:11.12 | TJNII | Ring detector circuit got blasted by lightning? |
23:11.54 | ricrc | Something else got blasted then probably.. because asterisk detects the incoming call.. all the software works as if it got answered... |
23:12.09 | ricrc | problem is.. it drops it as soon as it was supposed to answer. |
23:12.42 | TJNII | Time to break out the scope! |
23:27.02 | *** join/#asterisk darkpixel (~darkpixel@173-12-179-89-oregon.hfc.comcastbusiness.net) |
23:29.57 | *** join/#asterisk russ (~russ@206.29.188.233) |
23:30.01 | darkpixel | When I call Playback(buz), it refuses to play any type of audio file I put in /usr/share/asterisk/sounds. I have tried buz.sln, buz.wav, buz.mp3, buz.gsm. I get this error in the console: WARNING[12601]: file.c:650 ast_openstream_full: File 'buz' does not exist in any format. Any pointers? |
23:32.53 | TJNII | permissions. |
23:33.59 | darkpixel | I've checked permissions. I tried making sure it matched the permissions of the other files in /usr/share/asterisk/sounds, and I tried chmod 777. |
23:34.37 | *** join/#asterisk ricrc (~Rick@189.252.26.48) |
23:34.40 | TJNII | What about the directory they are in? |
23:34.56 | darkpixel | Actually, I just checked. Asterisk isn't playing anything from that directory. Hmm... ;) |
23:36.07 | darkpixel | That's really going to annoy the crap out of me if I find it's a strange permissions problem--I've been chasing down audio conversion problems for a day... |
23:38.20 | darkpixel | Damn--that was it. 'chown asterisk:asterisk . -R' got it. Very lame. |
23:38.46 | darkpixel | Thanks for the kick in the rear, TJNII. |
23:39.18 | *** join/#asterisk Ziaeon (~Alchemist@adsl-074-166-171-132.sip.mia.bellsouth.net) |
23:39.48 | *** join/#asterisk ruben23 (~RLACUMBA@121.97.111.142) |
23:51.21 | *** join/#asterisk Alagar (~Administr@122.164.33.167) |
23:56.48 | *** join/#asterisk tzafrir_laptop (~tzafrir@bzq-218-155-148.cablep.bezeqint.net) |