00:15.27 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
00:21.34 | *** join/#asterisk ariel_ (~chatzilla@c-24-127-196-248.hsd1.fl.comcast.net) |
00:25.54 | *** part/#asterisk SeriousMatters (~Sirius@87.113.86.107.plusnet.pte-ag2.dyn.plus.net) |
00:30.56 | *** join/#asterisk Defraz (~Defraz@c72co-edge-router.fuzecore.com) |
00:58.07 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
01:05.24 | *** join/#asterisk Paulius (~Paulius@unaffiliated/paulius) |
01:06.33 | Paulius | I've got a question. I'm trying to link two PBXes togethor. All I want to do is have a remote extension. I created an IAX2 trunk to the first PBX on the second PBX. On the first PBX, the second PBX is just added as an extension. Outgoing calls work fine, but I can't receive calls. Any tips/pointers? |
01:30.27 | *** join/#asterisk jaytee (~jforde051@unaffiliated/jaytee) |
01:33.47 | *** join/#asterisk diegomad (mad@190.157.33.229) |
01:40.41 | *** join/#asterisk wdbl (~not@ool-44c0668f.dyn.optonline.net) |
01:44.28 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
01:48.59 | *** join/#asterisk wdbl (~not@ool-44c0668f.dyn.optonline.net) |
01:49.49 | *** join/#asterisk KavanS (~KavanS@static-173-50-141-22.ptldor.fios.verizon.net) |
01:53.21 | *** join/#asterisk xuser (~xuser@unaffiliated/xuser) |
01:57.08 | *** join/#asterisk JAMMAN2110 (~james@unaffiliated/jamman2110) |
01:58.47 | *** join/#asterisk wdbl (~not@ool-44c0668f.dyn.optonline.net) |
01:59.49 | Paulius | Found it. New IAX2 security: http://wiki.kolmisoft.com/index.php/IAX2_Call_rejected,_CallToken_Support_required |
02:15.14 | *** join/#asterisk dewinda (~sahan@123.231.104.44) |
02:20.52 | *** join/#asterisk antiwire (~antiwire@unaffiliated/antiwire) |
02:24.02 | *** join/#asterisk JAMMAN2110 (~james@unaffiliated/jamman2110) |
02:24.47 | *** join/#asterisk githogori (~githogori@adsl-66-123-22-146.dsl.snfc21.pacbell.net) |
02:25.47 | hardwire | there shold totally be a start,end option for playback |
02:25.53 | hardwire | err.. shuold :) |
02:26.12 | hardwire | Playback(filename:2.2s:5.0s) |
02:26.31 | hardwire | hehe |
02:27.08 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
02:27.38 | *** join/#asterisk Deeewayne (~dwayne@c-71-207-214-190.hsd1.al.comcast.net) |
02:27.39 | *** mode/#asterisk [+o Deeewayne] by ChanServ |
02:31.43 | hardwire | nuhr |
02:36.21 | *** join/#asterisk angler (~angler@pdpc/sponsor/digium/angler) |
02:36.21 | *** mode/#asterisk [+o angler] by ChanServ |
02:40.41 | *** join/#asterisk Sargun (~Sargun@atarack/Staff/Sargun) |
03:02.40 | ChannelZ | hardwire: get coding |
03:04.08 | *** join/#asterisk Slugs_ (~yeah@173-8-52-45-Jacksonville.hfc.comcastbusiness.net) |
03:04.15 | Slugs_ | evening |
03:05.11 | ChannelZ | Yes. Yes it is. |
03:05.36 | Slugs_ | ;0 |
03:06.39 | ChannelZ | It's 9. |
03:06.46 | Slugs_ | i saw that |
03:06.57 | Slugs_ | it's 11 for me |
03:07.12 | Slugs_ | mnt time? |
03:07.20 | ChannelZ | Yah |
03:07.25 | Slugs_ | where about? |
03:07.28 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
03:07.37 | ChannelZ | Colorado |
03:07.44 | Slugs_ | you ski? |
03:07.59 | ChannelZ | Not in ages |
03:08.27 | Slugs_ | you wathe the broncos> |
03:08.28 | Slugs_ | ? |
03:08.32 | Slugs_ | watch |
03:08.48 | ChannelZ | no I hate football |
03:08.50 | Slugs_ | lol |
03:08.56 | Slugs_ | what do you watch |
03:09.06 | hardwire | ChannelZ: no you! |
03:09.12 | ChannelZ | LOST |
03:09.16 | Slugs_ | lol |
03:09.35 | ChannelZ | hardwire: hey, you want it.. |
03:09.36 | Slugs_ | shane you watch football? |
03:12.51 | Slugs_ | hardwire |
03:14.21 | Slugs_ | ChannelZ, how long have you be an asteirks user? |
03:14.30 | Slugs_ | asterisk* |
03:14.39 | ChannelZ | hmm a little over 2 years now I guess |
03:15.06 | Slugs_ | How long w/ linux? |
03:15.38 | hardwire | Slugs_: football is hard for me to concentrate on |
03:15.44 | hardwire | so I usually just eat the doritos |
03:15.48 | hardwire | bbl -> home |
03:15.52 | Slugs_ | k |
03:16.12 | ChannelZ | uhm... gosh... I've no idea. 10ish+ if I had to guess? |
03:16.47 | Slugs_ | when you first stated using it was it difficult at all for you? |
03:16.53 | Slugs_ | started. |
03:17.31 | carrar | Asterisk does have a bit of a learning curve |
03:17.36 | ChannelZ | I setup our first NAT/firewall at the place I used to work at on Redhat 5 or 6 I think |
03:17.52 | ChannelZ | Which, linux or asterisk? (or both?) |
03:18.02 | Slugs_ | yeah sorry, linux |
03:18.19 | Slugs_ | but both answers i would like ;) |
03:18.26 | ChannelZ | Well I was used to CLIs, I was an Amiga user |
03:19.11 | ChannelZ | So I wouldn't say it was hard to learn but I don't pretend to know everything now either |
03:19.34 | Slugs_ | i just run into compile issues, |
03:19.44 | Slugs_ | libraries are like an art form |
03:19.56 | Slugs_ | that's what i get stuck on the most |
03:20.54 | Slugs_ | my compile issues stem most from missing libs, or duplicate libs or misplaced libs |
03:21.05 | ChannelZ | Yeah I'm the least comfortable with that as I don't really keep up on it. I programmed in C on the Amiga back in the day and was used to arcane compilers then, but I feel out of coding for quite awhile |
03:21.41 | Slugs_ | yeah, i think it would be smart to know C. |
03:21.51 | Slugs_ | esp with a C based os |
03:22.05 | ChannelZ | The great thing about open source is a ton of people are working on a ton of things and you can use lots of other people's code. The terrible thing about open source is a ton of people are working on a ton of things and you can use lots of other people's code. |
03:22.17 | Slugs_ | lol |
03:22.20 | Slugs_ | good point |
03:22.36 | Slugs_ | i never really thought of that |
03:22.40 | ChannelZ | dependencies are a bitch |
03:22.53 | Slugs_ | prob the best way for me to learn is looking at code |
03:23.06 | Slugs_ | what distro are you using? |
03:23.21 | ChannelZ | guess it depends on what you're looking at :) There's some pretty obscure terse shit roaming around |
03:23.32 | ChannelZ | Ubuntu nowadays |
03:23.34 | Slugs_ | hmm yah |
03:23.54 | Slugs_ | yeah i have openbsd, ubuntu and centos boxes |
03:24.03 | Slugs_ | i like them all pretty well. |
03:24.28 | ChannelZ | My first was RH, back on a 386. Ran SuSE for awhile at my old job mainly because it had software setups for RAID already. Ran Slackware for awhile. The last time around I used Ubuntu |
03:24.33 | Slugs_ | i built a LFS box to learn but that was a bitch |
03:24.48 | Slugs_ | oh yeah i had slack |
03:24.53 | Slugs_ | slack 9 |
03:24.59 | Slugs_ | never used it since tho |
03:25.19 | ChannelZ | Me either (I think was on 10) |
03:25.34 | Slugs_ | ubuntu is pretty simple with dependencies and such |
03:25.36 | ChannelZ | I liked that it was stripped-down and no-nonsense, but that became to be kind of a PITA at the same time |
03:25.45 | *** join/#asterisk chendy (~chatzilla@204.152.211.137) |
03:25.45 | Slugs_ | exactly |
03:25.56 | Slugs_ | you would like LFS im sure then |
03:26.05 | Slugs_ | can't get more stripped down that that |
03:26.51 | ChannelZ | heh well it's fun to tinker and learn on those types of systems, but then you want some niceities |
03:26.51 | Slugs_ | than* |
03:27.02 | Slugs_ | sure |
03:27.08 | Slugs_ | like a package manager |
03:27.09 | Slugs_ | ;) |
03:27.13 | ChannelZ | I just don't like using taken-over systems from the get-go, because you don't learn about how things work, only how this one thing wants you to work |
03:27.23 | Slugs_ | true |
03:28.01 | ChannelZ | This is why I detest FreePBX.. I think most people do things backwards, they say "I want to play with asterisk, I'm going to get AsteriskNOW to start learning it because it seems easy" |
03:28.03 | Slugs_ | yeah, ill never run a windows box again, unless i forced |
03:28.16 | Slugs_ | yes |
03:28.20 | ChannelZ | But all you're learning is how FreePBX obfuscates the entire process |
03:28.30 | Slugs_ | exactly |
03:28.34 | Slugs_ | and you limited! |
03:28.57 | ChannelZ | I mean I wrote HTML by hand for a long time, great knowledge.. but now I use Dreamweaver :) |
03:29.09 | Slugs_ | lol yeah |
03:29.39 | Slugs_ | i did the same, I feel as long as 'you konw it' make your life easy if you can |
03:30.01 | Slugs_ | but if you don't you need to learn the hard way first or you really 'dont know it' |
03:30.08 | kuku | Anything that will handle Faxes over ip really well ? |
03:30.47 | ChannelZ | Fax For Asterisk? |
03:30.55 | Slugs_ | it's like buying a mac and saying you know debian |
03:31.09 | ChannelZ | Anything-over-IP working 'really well' has more to do with what happens between point A and point B that isn't in your control |
03:31.46 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
03:31.46 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
03:31.50 | Slugs_ | s/debian/linux/ |
03:32.17 | leifmadsen | I run Linux on my Mac :) |
03:32.18 | ChannelZ | heh |
03:32.23 | leifmadsen | (not OSX) |
03:32.45 | Slugs_ | ;0 |
03:32.48 | ChannelZ | I really hate OSX's mouse accelleration |
03:32.59 | leifmadsen | I really hate Linux's shitty trackpad support |
03:33.04 | leifmadsen | it's very "grainy" |
03:33.19 | leifmadsen | when I go on a diagonal, I can see the mouse moving in steps |
03:33.29 | ChannelZ | I feel fatigued after working on a Mac for half an hour.. it's like the most imprecise thing ever |
03:33.37 | Slugs_ | i'm getting a mac for app building purposes |
03:33.45 | Slugs_ | lol |
03:33.59 | leifmadsen | I have a MacBook Pro and my next laptop will certainly not be a MacBook Pro |
03:34.07 | ChannelZ | what, iphone app building? |
03:34.13 | Slugs_ | is there any 'easy' way to build iphone apps on something other than a mac? |
03:34.26 | ChannelZ | Hackintosh! |
03:34.38 | Slugs_ | you need osx tho right? |
03:34.51 | leifmadsen | I don't build iphone apps because iphone sucks :) |
03:34.55 | ChannelZ | Mostly |
03:35.03 | Slugs_ | yeah i figured |
03:35.12 | Slugs_ | leifmadsen, what phone do you have |
03:35.17 | leifmadsen | Nokia E71 |
03:35.19 | leifmadsen | awesome phone |
03:35.24 | ChannelZ | I'm not sure if their emulator runs in a 3rd party VM or if it's their own |
03:35.27 | leifmadsen | I have been able to multitask for over a year |
03:35.38 | Slugs_ | that is a brick, toss it in the nearest lake |
03:35.42 | Slugs_ | lol jk |
03:35.42 | Slugs_ | ;) |
03:35.57 | leifmadsen | hey, I can run Skype in the background (native app) and still do whatever I want in the foreground |
03:35.57 | ChannelZ | The Palm Pre for instance just uses Virtual Box |
03:36.21 | Slugs_ | leifmadsen, honestly how is batter life while app is bg'ed? |
03:36.30 | leifmadsen | works for the whole day |
03:36.48 | Slugs_ | well iphone 4.0 will finially have that |
03:36.53 | leifmadsen | battery life is actually pretty good. I run Seven which is push email, along with skype and fring for IM and it lasts about 12 hours |
03:36.53 | Slugs_ | finially ;/ |
03:37.00 | leifmadsen | late to the party |
03:37.05 | leifmadsen | and you have to have 3GS |
03:37.09 | leifmadsen | honestly, fuck apple |
03:37.19 | Slugs_ | leifmadsen, i have edge ;0 |
03:37.23 | leifmadsen | I have 3G |
03:37.27 | Slugs_ | fuck att |
03:37.27 | leifmadsen | ok bedtime |
03:37.31 | leifmadsen | fuck Rogers |
03:37.47 | *** part/#asterisk SwapDonkey (~antiwire@unaffiliated/antiwire) |
03:38.12 | Slugs_ | ChannelZ, how do you compare virtualbox w/ vmware? |
03:38.17 | ChannelZ | I just like how Apple used to be the 'fight The Man' company.. and now they ARE The Man 10X over |
03:38.24 | Slugs_ | lol |
03:38.26 | ChannelZ | I dunno I've never used vmware |
03:38.26 | Slugs_ | yes |
03:39.04 | Slugs_ | i have a FS virtualbox, centos 5.3 runs pretty well |
03:39.24 | Slugs_ | its configured so i can pop it up and boom make calls |
03:39.35 | Slugs_ | asterisk, and FS |
03:39.59 | *** join/#asterisk p3nguin (gpz5GvdFkf@mtop-mpls.a2infotech.com) |
03:40.09 | Slugs_ | have you tried FS or do you get booted for mentoining it ? |
03:42.06 | ChannelZ | FS? Freeswitch? |
03:42.19 | Slugs_ | yes |
03:42.25 | ChannelZ | no never tried it |
03:43.27 | Slugs_ | do you run asterisk in a corporate env? |
03:43.31 | p3nguin | A friend of mine uses FreeSWITCH because he believes everything bad that the FreeSWITCH devs say about Asterisk. |
03:44.21 | ChannelZ | Well, a corporation of 2 I guess :) |
03:44.38 | Slugs_ | what do you do? |
03:44.56 | Slugs_ | p3nguin, you convience him otherwise? |
03:44.58 | ChannelZ | Video post.. edit, graphics, animation |
03:45.05 | Slugs_ | cool |
03:45.07 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
03:45.17 | Slugs_ | im terrible with that |
03:45.22 | Slugs_ | TERRIBL |
03:45.24 | Slugs_ | E |
03:45.28 | p3nguin | slugs_: Nope. I just tell him that their opinions aren't necessarily right. |
03:45.35 | ChannelZ | I started my own place with a former coworker a couple of years ago, needed a phone system, so I built my own from * :) |
03:45.56 | Slugs_ | very cool |
03:46.28 | Slugs_ | p3nguin, you use * in corporate env? |
03:47.06 | Slugs_ | ChannelZ, all voip? |
03:47.30 | ChannelZ | Internally, but externally POTS on a TDM card |
03:47.39 | p3nguin | slugs_: If your definition of corporate is the same as that of channelz... yes, I use it in a corporate environment. |
03:48.26 | Slugs_ | im trying to incorporate * in a 5000+ endpoint avaya system |
03:48.34 | Slugs_ | it's been fun |
03:48.58 | ChannelZ | oh yeah I remember you saying you were doing it to add some extensions |
03:49.14 | Slugs_ | yeah i finially got it ;0 |
03:49.20 | Slugs_ | took long enough |
03:49.55 | Slugs_ | h323 support is pretty sparse ... |
03:50.27 | ChannelZ | just old I guess |
03:50.54 | Slugs_ | it's disappointing |
03:51.38 | Slugs_ | opal seems pretty active regarding h323 |
03:52.04 | Slugs_ | i had the pleasure of chatting with the author |
03:52.23 | Slugs_ | no opal support in * it seems |
03:53.28 | ChannelZ | Don't know what that is |
03:53.53 | Slugs_ | h323 stuff |
03:54.52 | Slugs_ | is iax2 used only to connect asterisk boxes together? |
03:55.03 | p3nguin | no |
03:55.16 | ChannelZ | It's most useful for that but not only by any means |
03:55.47 | Slugs_ | you can connect endpoints with it? |
03:56.17 | ChannelZ | Yeah |
03:56.49 | ChannelZ | Not sure of any hard devices using it (which isn't to say there aren't any, I just don't know of them) but Zoiper for instance can speak IAX |
03:57.11 | Slugs_ | oh cool |
03:57.43 | *** join/#asterisk smooth_penguin (~smoove@59.95.23.20) |
03:57.45 | Slugs_ | i just installed syphon on my iphone and connected that to my * and it works really well |
03:58.49 | Slugs_ | i don't really like google, but they have their hands in everything, and the products are nice |
04:01.32 | ChannelZ | The Google knows all, sees all |
04:02.47 | Slugs_ | exactly y i don't like them |
04:03.06 | p3nguin | You aren't the only one with those feelings. |
04:03.25 | Slugs_ | indeed |
04:03.45 | ChannelZ | http://www.theonion.com/video/google-opt-out-feature-lets-users-protect-privacy,14358/ |
04:03.58 | p3nguin | Just look at that deal with Buzz. |
04:05.03 | Slugs_ | lol ChannelZ, i saw that |
04:17.59 | pentanol | if I use odbc and users in database I can't use trunk auth between few asterisk just from sip.conf? http://codepad.org/Qss1S7Ht |
04:22.29 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
04:22.58 | ChannelZ | "You can keep any sip users in the flatfile AND use RealTime. How cool is that?" |
04:30.33 | *** join/#asterisk smooth_penguin (~smoove@59.95.11.20) |
04:33.21 | *** join/#asterisk corretico (~laguilar@201.201.46.106) |
04:38.48 | pentanol | yes, I made it, use sippeers form config... |
04:39.20 | pentanol | but , I've got an error when I tries querying users in rooms via odbc module ... Unable to execute query |
04:39.33 | pentanol | there my config and error http://codepad.org/tiDpjnF7 |
04:40.12 | pentanol | souch a query works well if I puts it just in mysql client... |
04:40.25 | *** join/#asterisk KavanS (~KavanS@static-173-50-141-22.ptldor.fios.verizon.net) |
04:40.26 | pentanol | such* |
04:46.18 | *** join/#asterisk Defraz (~Defraz@c72co-edge-router.fuzecore.com) |
04:51.55 | *** join/#asterisk mintos (~mvaliyav@nat/redhat/x-irugqisorfpcjewy) |
04:54.08 | pentanol | [TK]D-Fender here? |
04:55.16 | hardwire | he's off kicking booty |
04:55.21 | *** join/#asterisk mjsilva (~Manuel@mx1.connectinternational.eu) |
04:55.26 | mjsilva | hei |
04:56.25 | mjsilva | anyone know how to change the __FROM_DID=user_ip from a portech? |
04:57.48 | mjsilva | the user_ip is killing me, since I have two GSM cards I want to be able to set inbound routes for each one |
04:57.52 | mjsilva | but I can't since every call I make to the GSM comes with this wierd DID |
04:59.06 | hardwire | portech GSM? |
04:59.14 | hardwire | yeh |
04:59.20 | hardwire | I have a few. |
04:59.27 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
04:59.38 | hardwire | I use sip accounts and that seems to make things easier. |
05:00.26 | mjsilva | hardwire: but with sip accounts, you are able to see the caller number? |
05:01.29 | mjsilva | my problem with sip accounts was that |
05:02.14 | mjsilva | I couldn't see the caller number in my phones, I saw the sip account number |
05:02.56 | hardwire | do me a favor and when you answer a call from the GSM gateway.. automatically run DumpChan() |
05:03.01 | hardwire | see what pops up |
05:05.28 | mjsilva | hardwire: using freepbx, this is what I have: http://pastebin.com/ThjrLARz |
05:07.25 | hardwire | apparently freepbx is incapable of using dumpchan? |
05:07.55 | hardwire | what was the phone number that called the GSM gateway for that log? |
05:08.41 | mjsilva | 912936623 |
05:08.42 | mjsilva | this one |
05:08.57 | hardwire | 912936623 |
05:09.07 | hardwire | I could have guessed that cause it's in that log file several times |
05:09.11 | mjsilva | I got the CID name and the trunk SIM2 |
05:09.27 | hardwire | what do you need? |
05:09.28 | mjsilva | but I can't route in freepbx with either I guess |
05:09.38 | hardwire | that's a freepbx problem |
05:09.44 | mjsilva | only with CID numbers and DID |
05:09.46 | hardwire | ~freepbx |
05:09.47 | infobot | [~freepbx] FreePBX is unable to be supported here. It is made up of complex dialplans and scripts which can't be easily supported by people who aren't deeply involved. Try joining #freepbx and asking there, or fpbx |
05:10.56 | hardwire | mjsilva: just a hint.. you should be able to tell the portech what extension to call on your freepbx system |
05:11.06 | hardwire | set that to the SIM card ANI |
05:11.26 | hardwire | portech has examples of this in their docs |
05:13.16 | mjsilva | yes hardwire I know that 1000@192.168.0.1 for example on mobile to lan, but my problem is that next I can't see the number..... unlesss I call a ring group... humm gonna test it |
05:13.29 | mjsilva | :P |
05:13.42 | contrabanda | Please i need hepl with dahdi. I have configured chan_dahdiwith pri and ss7 signalling. when i restart asterisl it gives me dahdi errors. http://pastebin.com/QecQKJ4a Please help to fix this problem. |
05:14.12 | hardwire | contrabanda: who are you using SS7 with? |
05:14.51 | hardwire | also.. restart asterisk |
05:15.19 | hardwire | like it's screaming at you.. if you changed any of the variables it mentions before the error you'll need to reload the channel driver completely |
05:15.20 | *** join/#asterisk TrippaOP (~TrippaOP@harradence.net) |
05:15.24 | TrippaOP | hi |
05:15.26 | hardwire | safest bet is to restart asterisk |
05:15.50 | hardwire | TrippaOP: An operator will be with you shortly. |
05:16.05 | TrippaOP | i need some help, i've setup asterisk, i am in australia and i think we use G729 here, i cant seem to have my calls forwarded, i just need some help setting it up.. |
05:16.29 | hardwire | TrippaOP: who are you interfacing asterisk with? |
05:16.40 | TrippaOP | my voip provider |
05:16.48 | TrippaOP | my isp gives a free voip account |
05:17.01 | hardwire | ah.. that explains your codec reference. |
05:17.02 | mmlj4 | "I need my own VOIP on my computer that can allow me to use my dial connection through my VOIP over my broadband. Â I do not have a phone line and I need a solution to have use dial up service. Â I am open to any and all ideas on how to do this." |
05:17.06 | mmlj4 | good luck |
05:17.18 | hardwire | eh? |
05:17.22 | mmlj4 | hardwire: indeed |
05:17.42 | hardwire | mmlj4: where'd you see that? |
05:17.48 | mmlj4 | guru.com |
05:17.52 | hardwire | lul |
05:18.16 | hardwire | TrippaOP: did your ISP give you any details? |
05:18.25 | mmlj4 | newbies overthinking problems, always good for a laugh |
05:18.45 | TrippaOP | yes i have the sip address, port username and password |
05:18.51 | mmlj4 | "go get a skype account" && problem solved |
05:19.08 | TrippaOP | when i do sip show registry |
05:19.10 | TrippaOP | it shows as registered |
05:19.10 | hardwire | TrippaOP: did they give it to you? |
05:19.14 | TrippaOP | yes |
05:19.17 | hardwire | ok |
05:19.18 | hardwire | just making sure |
05:19.20 | contrabanda | hardwire: i want to have ss7 and Pri. ss7 will use different span and pri another one |
05:19.24 | TrippaOP | it works fine on my router |
05:19.31 | hardwire | contrabanda: stop asterisk |
05:19.33 | hardwire | contrabanda: start asterisk |
05:19.43 | TrippaOP | but i want a 'preamble' before the call is answered |
05:20.03 | hardwire | TrippaOP: so you can make calls? |
05:20.43 | hardwire | TrippaOP: humor me. |
05:20.59 | TrippaOP | a ladys voice comes on "call can not be completed as dialed" |
05:21.13 | TrippaOP | it seems to be a message part of asterisk |
05:21.54 | hardwire | so yer a nub? |
05:21.57 | hardwire | :P |
05:22.00 | hardwire | !book |
05:22.02 | hardwire | err |
05:22.05 | hardwire | ~book |
05:22.06 | infobot | [~book] Asterisk: The Future of Telephony 2nd Edition (ISBN 0-596-51048-9) --- Order yours at http://www.oreilly.com/catalog/9780596510480/ --- Free downloadable PDF at http://www.asteriskdocs.org --- HTML at http://astbook.asteriskdocs.org or see ~buybook |
05:22.09 | hardwire | yay! |
05:22.12 | hardwire | learnlearnlearn |
05:22.28 | hardwire | redbull + book = power |
05:22.36 | TrippaOP | hmm |
05:22.41 | TrippaOP | so its not a quick easy fix |
05:22.45 | TrippaOP | i thought it was to do with the codecs? |
05:22.47 | hardwire | it's quick for me |
05:22.50 | hardwire | because I read the book :) |
05:23.07 | TrippaOP | my softphone is eyebeam |
05:23.22 | TrippaOP | i registered using extension 2000 |
05:23.23 | hardwire | your softphone is not covered in the hallowed pages of thine above mentioned book. |
05:23.52 | TrippaOP | hmm |
05:23.53 | hardwire | usually your sip phone has to have a context set to something that has dialplan available to route a call |
05:23.55 | TrippaOP | its weird |
05:24.03 | hardwire | context=from-my-eyebeam-sip-hell-phone-of-doom |
05:24.13 | hardwire | and in your extensions.conf there would be a context for that |
05:24.25 | hardwire | followed with some dialplan that says how to route a call based on what is dialed |
05:24.37 | hardwire | is that already set up? |
05:25.20 | TrippaOP | ok so i am using http://192.168.1.7/admin as the admin panel |
05:25.30 | TrippaOP | i dont need to edit .conf files right |
05:25.38 | TrippaOP | i can just configure everything frm GUI ? |
05:26.07 | TrippaOP | FreePBX Connections |
05:26.07 | TrippaOP | IP Phones Online |
05:26.07 | TrippaOP | 1 |
05:26.07 | TrippaOP | IP Trunks Online |
05:26.07 | TrippaOP | 1 |
05:26.07 | TrippaOP | IP Trunk Registrations |
05:26.23 | manxpower | ~freepbx |
05:26.24 | infobot | [~freepbx] FreePBX is unable to be supported here. It is made up of complex dialplans and scripts which can't be easily supported by people who aren't deeply involved. Try joining #freepbx and asking there, or fpbx |
05:27.01 | TrippaOP | so generally |
05:27.08 | TrippaOP | what is the quickest and easiest way to set it up |
05:27.11 | TrippaOP | using the config files |
05:27.15 | TrippaOP | or using the web interface? |
05:27.25 | hardwire | ~freepbx |
05:27.25 | infobot | [~freepbx] FreePBX is unable to be supported here. It is made up of complex dialplans and scripts which can't be easily supported by people who aren't deeply involved. Try joining #freepbx and asking there, or fpbx |
05:27.46 | hardwire | manxpower: should I graph how often that macro is called? |
05:27.49 | mmlj4 | hey manxpower |
05:27.58 | manxpower | hello mmlj4 |
05:28.18 | manxpower | hardwire: better to graph the poor sods that don't realize that FreePBX is nothing like asterisk. |
05:28.29 | mmlj4 | manxpower: had you heard that UMC closed all but one location (covington), then sold out to the hospital? |
05:28.33 | hardwire | TrippaOP: I wanna help you.. but I'm not too familiar with FreePBX problems. |
05:28.59 | manxpower | mmlj4: not surprising. I'm very happy at my new job |
05:29.04 | mmlj4 | TrippaOP: it's a flippin' web interface... duh |
05:29.10 | mmlj4 | cool |
05:29.24 | TrippaOP | hardwire: do you suggest i just use the config files? |
05:29.52 | manxpower | TrippaOP: we don't care what you use, but if you want help here you will not be using gui generated config files. |
05:29.56 | hardwire | I actually suggest you use the book |
05:30.01 | hardwire | which leads to just using the config files |
05:30.08 | hardwire | and offers you an awesome amount of asterisk-fu |
05:31.07 | hardwire | TrippaOP: any reason you're not connecting eyebeam directly to your provider? |
05:31.10 | *** join/#asterisk Wildy (~simba@91.205.147.94) |
05:31.31 | TrippaOP | hardwire: i would like to have a preamble |
05:31.36 | TrippaOP | or IVR |
05:32.07 | hardwire | what kind of preamble? |
05:32.13 | TrippaOP | " |
05:32.13 | mmlj4 | I keep finding that there are few sysadmins left in the world... everyone wants to use linux, but no one wants to do more than desktop stuff with it... same thing here... most folks just want to make a couple of phones work with some sip provider, and be happy |
05:32.24 | TrippaOP | "Hi thanks for calling, please wait while we take your call " |
05:32.28 | TrippaOP | or even an "IVR" |
05:32.43 | hardwire | mmlj4: if you wanna do neat stuff.. use the right channel |
05:32.44 | hardwire | :P |
05:32.58 | hardwire | TrippaOP: that would be an IVR in the loosest terms :) |
05:33.08 | TrippaOP | ahh i see |
05:33.13 | TrippaOP | well that's what iam trying to acheive |
05:33.23 | TrippaOP | using eyebeam directly to voip provider works fine |
05:33.42 | mmlj4 | if you dont' need an IVR, and just an announcement, it's implemented in exactly 1 line of code in your dialplan |
05:34.21 | hardwire | TrippaOP: a base install of asterisk and nothing else.. lets see.. you could get that going in around 10 lines of changed config? |
05:34.25 | hardwire | maybe less |
05:34.52 | hardwire | set up extensions.conf.. set up a sip registration.. add a sip peer and a sip friend. |
05:34.55 | hardwire | done |
05:37.07 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
05:37.30 | *** join/#asterisk Faithful (~Faithful@119.12.159.34) |
06:00.04 | TrippaOP | i did all that hardwire |
06:00.13 | TrippaOP | even says its registered |
06:02.53 | *** join/#asterisk sourcode (~code@ppp-58-8-237-50.revip2.asianet.co.th) |
06:08.09 | *** join/#asterisk Faithful (~Faithful@123.200.205.14) |
06:17.28 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
06:31.45 | hardwire | well.. I lost trippaop.. I dunno if he knows it's not magic and needs a route |
06:41.39 | *** join/#asterisk Akiraaa (~Akira@92.81.200.223) |
06:46.49 | *** join/#asterisk ivaxer (~ivaxer@dev.ptr.sgu.ru) |
06:49.57 | *** join/#asterisk dewinda (~sahan@123.231.118.66) |
06:52.45 | dewinda | im trying to use ODBC cdr in Asterisk 1.6 where can I find the quarry to create cdr table. |
06:54.45 | dewinda | can someone help me to sort out pgsql odbc cdr issue |
06:55.50 | *** join/#asterisk pif (~ldm@zenon.apartia.fr) |
06:56.07 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
07:07.00 | ChannelZ | look at realtime_pgsql.sql in contrib/scripts |
07:10.10 | dewinda | thanks got it its working |
07:13.01 | ChannelZ | http://dlisted.com/node/36809 |
07:17.57 | carrar | dewinda, don't need ODBC for psql cdr |
07:19.11 | dewinda | but its working, is there any drawback |
07:19.20 | *** join/#asterisk coppice (~chatzilla@202.64.176.93) |
07:23.54 | dewinda | now issue is duration and billsec both are equal (Im using DAHDI and gsm modem with polarity reversal for testing ) |
07:26.29 | carrar | extra layer htat you don't need |
07:27.31 | carrar | You can get to NY form LA by stopping in texas, but why not just fly direct? |
07:27.31 | Nugget | Don't mess with Texas. |
07:29.24 | dewinda | thats true I quite new to asterisk , I fallowed "Asterisks Future of telephony " books instructions |
07:31.22 | *** join/#asterisk Taco24501 (~Taco24502@c-67-187-29-41.hsd1.va.comcast.net) |
07:31.25 | dewinda | Im getting ANSWERED for every cdr even without answer and duration and billsec both are equal . any idea to sort this out |
07:32.28 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
07:44.34 | *** join/#asterisk FabiOne (~fabi@151.13.190.14) |
07:44.37 | FabiOne | hi all |
07:51.12 | ChannelZ | yo yo yo |
08:18.02 | ChannelZ | hmmm |
08:18.40 | *** join/#asterisk Wildy (~simba@mas4-gw.pleer.ru) |
08:29.13 | *** join/#asterisk ChannelZ (channelz@burner.com) |
08:40.57 | *** join/#asterisk ttwhy (~tekkno@p4FECF289.dip.t-dialin.net) |
08:44.07 | ttwhy | Hi, can someone suggest me a good windows softphone (light and reliable, free would be best)? i've tried ekiga and x-lite but booth produce problems (but differend ones ;) ) |
08:44.09 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
08:48.05 | dewinda | x-lite works well |
08:50.41 | [TK]D-Fender | ttwhy: Could you be a little more specific than "produces problems"? |
08:51.08 | *** join/#asterisk kartik (~koolkarti@117.199.114.208) |
08:52.31 | *** join/#asterisk Tim_Toady (~moi@77.49.52.245.dsl.dyn.forthnet.gr) |
08:52.51 | ttwhy | [TK]D-Fender, ekiga stops working after a while and x-lite crashes while phoning |
08:53.32 | [TK]D-Fender | ~zoiper |
08:53.33 | infobot | [~zoiper] Zoiper (Formerly known as Idefisk) is a free SIP and IAX soft-phone for Windows, MacOSX, and Linux that can be found at http://www.zoiper.com |
08:53.33 | ChannelZ | Zoiper |
08:53.48 | ttwhy | thanks! i will try that one |
08:53.57 | ChannelZ | 3CX Phone although it's kind of retarded iphone clone |
09:00.45 | *** join/#asterisk sulex (~sulex@dynamic-adsl-78-14-172-249.clienti.tiscali.it) |
09:01.35 | FabiOne | i don't like zoiper, i prefer 3CX |
09:02.55 | FabiOne | someone here tryed the cisco sip softphone? |
09:11.26 | *** join/#asterisk zamba (marius@flage.org) |
09:12.23 | ChannelZ | never heard of it |
09:14.26 | *** join/#asterisk pentanol (~pentanol@77.35.49.164) |
09:16.43 | *** join/#asterisk pentanol (~pentanol@77.35.49.164) |
09:17.40 | pentanol | ping |
09:18.18 | FabiOne | pong |
09:19.27 | *** join/#asterisk ttwhy (~tekkno@p4FECFA48.dip.t-dialin.net) |
09:21.17 | *** join/#asterisk Zeeek (~anonymous@pdpc/supporter/active/zeeek) |
09:31.49 | pentanol | g'day, FabiOne perhaps you knows why it can happening? http://codepad.org/zReYhh4f |
09:32.38 | *** join/#asterisk Faithful (~Faithful@123.200.205.14) |
09:51.30 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
10:14.51 | *** join/#asterisk Taco24501 (~Taco24502@c-67-187-29-41.hsd1.va.comcast.net) |
10:19.57 | *** join/#asterisk mikkel (~mikkel@84-238-113-66.u.parknet.dk) |
10:30.57 | *** join/#asterisk brezular (~brezular@adsl-dyn-203.95-102-18.t-com.sk) |
10:32.21 | *** join/#asterisk Tim_Toady (~moi@77.49.52.245.dsl.dyn.forthnet.gr) |
10:36.08 | *** join/#asterisk Belgarath (~Belgarath@banda.pl) |
10:36.21 | Belgarath | hi |
10:36.41 | Belgarath | is there any way i can use stun when I use asterisk as a client ? |
10:42.55 | pentanol | Belgarath on client side you use it Dial(SIP/whatever/did) ? |
10:43.24 | pentanol | DID* |
10:45.04 | Belgarath | SIP/whatever |
10:45.14 | Belgarath | <PROTECTED> |
10:45.20 | Belgarath | sorry for break in the middle |
10:45.42 | pentanol | so what's problem? |
10:45.46 | Belgarath | but i was more looking the other way around |
10:45.51 | Belgarath | i have incoming connections |
10:46.01 | Belgarath | and they are not forwarded properly throu the nat |
10:46.03 | pentanol | you should use into [whatever] nat=yes |
10:47.01 | *** join/#asterisk TimeRider (steve@5ac7b3e3.bb.sky.com) |
10:52.47 | Belgarath | Via: SIP/2.0/UDP 192.168.1.65:5060;branch=z9hG4bK5565669e;rport |
10:52.47 | Belgarath | From: "asterisk" <sip:asterisk@192.168.1.65>;tag=as1fa42532 |
10:52.55 | Belgarath | i got sth like theat in the debug |
10:53.04 | Belgarath | that is obviously not what i have in externip |
10:53.09 | Belgarath | is that ok ? |
10:54.12 | *** join/#asterisk Z_God (~julius@2001:888:141f:0:221:5dff:fe2a:6806) |
10:57.29 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
11:03.49 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
11:03.58 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
11:31.27 | *** join/#asterisk kotp (~vgoff@96.2.187.66) |
11:32.10 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
12:04.30 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
12:19.03 | leifmadsen | morning all |
12:19.34 | WIMPy | yawns |
12:22.00 | carrar | w0rD |
12:38.49 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
12:44.08 | Belgarath | well i kind of solved my problem |
12:44.17 | Belgarath | but i have two different providers |
12:44.31 | Belgarath | and one only works when I have nat=route |
12:44.40 | Belgarath | and other when I comment it out oalltoghether |
12:44.58 | Belgarath | (default setting) |
12:45.10 | Belgarath | is there a way to combine the two ? |
13:01.15 | *** join/#asterisk FlaPer87 (~FlaPer87@unaffiliated/flaper87) |
13:01.15 | rubbs | Belgarath: cant help you, but i love the nick. my netbook's hostname is Polgara |
13:01.46 | FlaPer87 | hey guys, I'm writing a new cdr for asterisk. If I want to compile it should I create my own makefile or it is good enough to put the .c file in the cdr folder? |
13:09.09 | jaytee | ~sipnat |
13:09.10 | infobot | [~sipnat] Quick guide on configuring * + SIP behind NAT : http://www.aocomputing.net/?p=3 , otherwise check the WIKI at http://www.voip-info.org/wiki/view/Asterisk+SIP+NAT+solutions |
13:11.09 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
13:14.49 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
13:14.49 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
13:16.12 | Belgarath | jaytee: i know |
13:16.21 | Belgarath | but the point is that i have two different connections |
13:16.29 | Belgarath | and each work with different typoe of nating |
13:16.45 | Belgarath | is there a way to do nat on per peer basis |
13:18.00 | jaytee | yes |
13:18.17 | jaytee | within the definition for that peer in sip.conf |
13:22.08 | Belgarath | ok |
13:22.47 | Belgarath | hmm |
13:22.53 | Belgarath | when i use localnet |
13:22.58 | Belgarath | anywher e in sip conf |
13:23.09 | Belgarath | it just does not allow me to connect to the providers |
13:23.15 | Belgarath | if I remove it i can register ok |
13:25.19 | FlaPer87 | I'm trying to compile the cdr I'm writing, it depends on other libs that are not in the standard paths, how can I include those paths using the asterisk Makefiles? |
13:27.22 | jaytee | FlaPer87, might want to ask that in #asterisk-dev |
13:27.36 | FlaPer87 | jaytee: you're right, thanks ;) |
13:30.31 | *** join/#asterisk Faithful (~Faithful@119.12.159.34) |
13:35.35 | Belgarath | I think I will go looking for iax providers:) |
13:35.39 | Belgarath | sip is useless |
13:35.40 | Belgarath | :) |
13:36.22 | *** join/#asterisk tessier_ (~treed@kernel-panic/copilotco) |
13:38.21 | jaytee | Belgarath, my condolences on the loss of your President and so many others this morning |
13:41.53 | Belgarath | thank you |
13:43.49 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
13:47.03 | *** join/#asterisk slidesinger (~slidesing@c-68-44-99-50.hsd1.nj.comcast.net) |
13:57.47 | manxpower | Belgarath: sip was never designed to do what you are doing with it. |
13:58.10 | *** join/#asterisk piparkuka (~ask@fw.wan.co.il) |
14:09.19 | Belgarath | manxpower: sip was never desing to be used in the modern network environment you mean :) |
14:10.37 | Belgarath | I think my solutiopn would be to put another asterisk over the vpn on a vps |
14:10.44 | Belgarath | which in turn would have public ips |
14:12.43 | piparkuka | hi, everyone. I can't find information about SMS service via SIP. |
14:15.26 | mmlj4 | ~wiki |
14:16.00 | mmlj4 | piparkuka: google... surely the wiki has entries for that |
14:16.50 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
14:16.58 | piparkuka | i know |
14:17.49 | manxpower | Belgarath:it was never designed for being routed by the server and not the network |
14:18.15 | Belgarath | manxpower: routers doing nat would have the same problem |
14:18.19 | manxpower | piparkuka: When you find out let us know! We've never heard of it either. What specific thing were you looking for? |
14:18.21 | Belgarath | would they not ? |
14:18.52 | Belgarath | so any network where each device does not have it's own ip address is not suitable |
14:19.08 | manxpower | Belgarath: Possibly. You would have similar (but easier to fix) if you wanted your web server to do something similar. |
14:19.27 | manxpower | Belgarath: no, multiple default routes is unsuitable unless running a routing protocol |
14:19.40 | Belgarath | manxpower: eachg protocol that have separate data nad control stream is broken design |
14:20.05 | Belgarath | including FTP |
14:20.24 | manxpower | Belgarath: Exactly! DCC in IRC, FTP, some older chat systems. |
14:21.27 | piparkuka | i have sip trunk, so i thought to use it as sms trunk |
14:21.53 | manxpower | piparkuka: you can't. |
14:22.26 | manxpower | piparkuka: ANY reference to direct SMS support in Asterisk is specific to SMS over PSTN lines using an FSK modem-like tone to talk to a SMS service provider |
14:22.36 | piparkuka | i see |
14:22.43 | piparkuka | 10x a lot |
14:23.02 | manxpower | there is also in "core show application sms" as well as the doc/ directory of Asterisk. |
14:23.32 | manxpower | piparkuka: you can, of course, pretty much do anything you want with an AGI script and wget/curl if you want web based "SMS" services -- they are really web/SMS gateway companies. |
14:26.26 | *** join/#asterisk [TK]D-Fender (~chatzilla@64.235.218.194) |
14:27.15 | manxpower | That is not really an "SMS" thin from Asterisk's point of view. |
14:27.38 | piparkuka | i wanted to ingerate nagios with asterisk in order to send sms alerts |
14:28.20 | manxpower | piparkuka: you should be able to send them direct from Nagios. |
14:28.43 | manxpower | well, you would need to write a script, of course, but it might be easier |
14:29.15 | piparkuka | yes of course |
14:29.23 | *** join/#asterisk Defraz (~Defraz@c72co-edge-router.fuzecore.com) |
14:29.38 | piparkuka | but first i wanted to check if asterisk supports sms over sip trunk |
14:30.11 | piparkuka | i didn't find any information about sms in SIP RFC |
14:30.18 | [TK]D-Fender | piparkuka: it doesn't. Asterisk is not a messaging platform |
14:31.13 | piparkuka | thanks to u i know :) |
14:31.21 | *** join/#asterisk Taco24501 (~Taco24502@c-67-187-29-41.hsd1.va.comcast.net) |
14:34.22 | *** join/#asterisk wdbl (~not@ool-44c0668f.dyn.optonline.net) |
14:38.26 | *** join/#asterisk mhaddog (~mhaddog@83.33.30.137) |
14:39.53 | Naikrovek | yawns |
14:39.57 | Naikrovek | thinks of returning to bed. |
14:49.54 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
14:53.03 | *** join/#asterisk jhirley (~jhirley@adsl-159-226-216.mia.bellsouth.net) |
15:01.44 | *** join/#asterisk endemic (~endemic@2001:49f0:a014::3) |
15:04.51 | *** join/#asterisk [TK]D-Fender (~chatzilla@64.235.218.194) |
15:08.24 | TJNII | "so any network where each device does not have it's own ip address is not suitable" for any IP based communications. |
15:14.35 | *** join/#asterisk endemic (~endemic@lynx.ipv6.onvox.net) |
15:16.54 | *** join/#asterisk atis_work (~atis_work@193.238.212.171) |
15:19.36 | *** join/#asterisk Faithful (~Faithful@119.12.159.34) |
15:19.52 | *** join/#asterisk mutax (~mutax@erde.kf.TU-Berlin.DE) |
15:21.39 | mutax | Hi there. I have a question concerning System() and MusicOnHold(). Is this feasable? I am executing an external command that takes some time and during that time I want the caller to hear some music. But when I call MusicOnHold before the System Application, the System Application is not executet. |
15:21.44 | *** join/#asterisk drmessano (~nonya@pdpc/supporter/active/drmessano) |
15:22.55 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
15:23.40 | *** join/#asterisk Sargun (~Sargun@atarack/Staff/Sargun) |
15:28.26 | *** join/#asterisk Taco24501 (~Taco24502@c-67-187-29-41.hsd1.va.comcast.net) |
15:36.16 | *** join/#asterisk Tim_Toady (~moi@77.49.52.245.dsl.dyn.forthnet.gr) |
15:39.34 | *** join/#asterisk KavanS (~KavanS@static-173-50-141-22.ptldor.fios.verizon.net) |
15:44.37 | *** join/#asterisk n3llyb0y (~quassel@cpc1-sout6-2-0-cust63.basl.cable.virginmedia.com) |
15:46.27 | *** join/#asterisk ruben23 (~ITadmin@122.55.48.243) |
15:47.02 | n3llyb0y | Hello. I had a spot of trouble a few days ago using an IVR prompt which uncovered a config problem I had. I thought I had solved the problem but something strange is happening when receiving calls that are originating outside of the country. The user will hear the IVR, select a menu and then either get an engaged tone or simply cut off. There is nothing in the debug telling me why that might be. Anyone have any ideas? |
15:48.00 | p3nguin | core verbose will show what is happening. Can you start by providing that? |
15:48.26 | n3llyb0y | sorry to sound so green but what is core verbose? |
15:48.37 | p3nguin | core set verbose 100 |
15:48.48 | p3nguin | Then originate the call that has trouble. |
15:49.06 | n3llyb0y | okay p3nguin. will have a go. does this group use a pastebin? |
15:49.07 | mutax | n3llyb0y: in the asterisk console (asterisk -r -c) |
15:49.22 | p3nguin | After the failure, paste the ENTIRE output from the beginning of the call to the end of the call into pastebin.com. |
15:49.37 | n3llyb0y | thanks :) |
15:50.15 | p3nguin | This output probably won't say why it fails, but at least we'll have a place to start. The core output will show what actually happens. |
15:50.19 | mutax | meanwhile - does some of the rejoined people know how I can play music while waiting for a System() command to get executed...? |
15:50.54 | WIMPy | mutax: Make it an agi instead? |
15:52.07 | mutax | uff. convert a shellscript and a perlscript to agi... only to get .... music -.- |
15:52.56 | WIMPy | I'd think you just add acommand to play a sample at the beginning. |
15:52.57 | *** join/#asterisk Cain` (~Geek@unaffiliated/cain) |
15:53.47 | mutax | let's see :) thanks again fot the tip |
15:53.53 | mutax | ehrm. hint |
15:55.14 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
15:56.01 | *** join/#asterisk Tim_Toady (~moi@77.49.52.245.dsl.dyn.forthnet.gr) |
15:57.01 | *** join/#asterisk arpu (~arpu@chello062178159144.10.14.univie.teleweb.at) |
16:02.31 | n3llyb0y | pasted: http://pastebin.com/38YRtMH6 |
16:02.37 | n3llyb0y | really appreciate the help :) |
16:03.07 | p3nguin | That's nice, but it's not what I asked for. |
16:03.14 | n3llyb0y | oh |
16:03.16 | *** join/#asterisk Naikrovek (~jjohnson@unaffiliated/naikrovek) |
16:05.22 | Naikrovek | oh dear |
16:05.34 | Naikrovek | the head IT guy in my india office is having trouble with pscp |
16:05.39 | Naikrovek | scp, really |
16:05.47 | Naikrovek | well, computers, really |
16:05.52 | [TK]D-Fender | pcp really? |
16:05.52 | p3nguin | Like... doesn't know how to use them? |
16:06.05 | Naikrovek | my main IT dude in an office of 100+ people can't figure out scp |
16:06.28 | p3nguin | What's to figure out? Where's his failure? |
16:06.45 | Naikrovek | his failure is that he's an idiot |
16:07.17 | Naikrovek | all he knows is windows gui stuff and he doesn't even know that well |
16:07.36 | Naikrovek | told him how to map a drive across active directory domains and he said he needs further explanation on how to do that |
16:07.37 | manxpower | try winscp |
16:07.42 | p3nguin | Tell him to use WinSCP or filezilla. |
16:07.44 | Naikrovek | on a saturday |
16:07.50 | Naikrovek | winscp is a good idea |
16:08.05 | n3llyb0y | ahh yes actually set the verbosity level - yes that would help |
16:08.30 | jaytee | if he can't figure out how to use Filezilla he should be shot |
16:09.30 | Naikrovek | he keeps pasting me the error the windows commandline gives when it can't find the file you're tryign to run |
16:09.51 | manxpower | Naikrovek: thank you for making me appreciate our Windows admin a little more (not much, but a little) |
16:10.29 | Naikrovek | i've told him three times now "add the file to your path" |
16:10.40 | Naikrovek | and three times he's come back with the same damned error |
16:11.35 | [TK]D-Fender | Naikrovek: he has internet access right? |
16:11.38 | p3nguin | Does he understand and speak the same language you are using to tell him how to do it? |
16:12.23 | Naikrovek | p3nguin, seems to. he can spell my name perfectly, which no other indian seems to be able to do |
16:12.44 | Naikrovek | when i speak with him on the phone, it sounds like he understands |
16:12.50 | Naikrovek | but then he pastes the error message |
16:12.55 | Naikrovek | and i *know* he's useless |
16:13.07 | Naikrovek | [TK]D-Fender, yes to internet access |
16:13.19 | Naikrovek | but i suppose you have to know how to use a computer to be able to use the internet to find anything out |
16:14.02 | [TK]D-Fender | Naikrovek: ... |
16:14.13 | [TK]D-Fender | Naikrovek: VNC over and take f-ing control of his station. |
16:14.22 | [TK]D-Fender | Naikrovek: And do it yourself and save the greif |
16:14.36 | Naikrovek | he did give me his logmein.com details |
16:14.55 | [TK]D-Fender | Naikrovek: Every one of my office stations has it, and every mobile user has a 2-icon solution to immediately handing me control from "wherever" |
16:15.12 | Naikrovek | i need that |
16:15.18 | Naikrovek | but here's the thing with these guys |
16:15.25 | Naikrovek | if i start doing their work, they'll completely give up trying |
16:15.32 | [TK]D-Fender | Naikrovek: replace them |
16:15.54 | Naikrovek | i wish i could, but you see, they're related to the owner or someone else important |
16:16.09 | Naikrovek | that entire office is related to itself |
16:16.18 | Naikrovek | people actually LIVE in the fucking office |
16:16.18 | *** part/#asterisk ivaxer (~ivaxer@dev.ptr.sgu.ru) |
16:16.54 | [TK]D-Fender | Naikrovek: \o/ |
16:16.58 | [TK]D-Fender | Naikrovek: pick your poison |
16:17.05 | Naikrovek | people literally have job titles of assistant to the assistant to the assistant to junior whatever |
16:17.10 | [TK]D-Fender | prefers iocain |
16:17.13 | Naikrovek | indeed |
16:17.34 | n3llyb0y | aha. verbose output is good - I think I see what's happening. Basically the dialtone coming in from the foreign connection doesn't get picked up - instead i get an UNKNOWN |
16:17.48 | Naikrovek | tries to take a nap... |
16:18.32 | [TK]D-Fender | n3llyb0y: PASTEBIN is your friend |
16:18.34 | [TK]D-Fender | ~pb |
16:18.35 | infobot | [~pb] A "pastebin" is a web-based service where you should paste anything over 3 lines so you don't flood the channel. Here are links to a few : http://www.pastebin.com , http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org , http://bin.cakephp.org/ , http://asterisk.pastey.net/ , or install pastebinit with yum or aptitude. |
16:19.16 | n3llyb0y | http://pastebin.com/TTGZ3nU2 |
16:20.10 | n3llyb0y | line 165 is I believe where it's all going tits |
16:20.18 | *** join/#asterisk Faithful (~Faithful@119.12.159.34) |
16:20.27 | Naikrovek | tits are when things start to go great |
16:20.40 | n3llyb0y | :) |
16:21.05 | [TK]D-Fender | n3llyb0y: == Auto fallthrough, channel 'SIP/sipgate.co.uk-081cfa78' status is 'UNKNOWN' <-- you have run out of steps in your extension and autofallthrough is enabled. the call thus ends immediately |
16:22.18 | [TK]D-Fender | n3llyb0y: You need to set "autofallthrough=no" under [general] or as a Set() in your dialplan |
16:22.19 | n3llyb0y | yeah. it seems that when the call is coming in from Sweden the dialtone isn't recognised as a valid menu choice and then I haven't put anything in place when that happen |
16:22.44 | *** join/#asterisk dewinda (~sahan@123.231.118.221) |
16:22.47 | [TK]D-Fender | n3llyb0y: Otherwise running out of steps will not lead to that context acting as an IVR, but rather a "Nothing more to do? HANGUP" |
16:23.13 | [TK]D-Fender | n3llyb0y: This is not a "dialtone" issue |
16:23.27 | [TK]D-Fender | n3llyb0y: you are making an IVR. What does dialtone have to dow ith anything? |
16:25.19 | n3llyb0y | sorry just not sure of all the nomeclature in telephony. Basically when the remote user presses '2' for example, it's not actually recognised is what I'm thinking. I know the remote caller is pressing something and it fails at that point. the dialplan works when I test it with UK based land lines and phones |
16:26.37 | [TK]D-Fender | n3llyb0y: AFAIK DTMF is the same everywhere. |
16:27.27 | n3llyb0y | and that is a very fair point. I will look into the autofallthrough setting as you suggest. Thanks for the assist |
16:27.37 | mutax | agi in shesllscript is c00l ;) |
16:27.39 | mutax | great! |
16:27.41 | *** part/#asterisk mutax (~mutax@erde.kf.TU-Berlin.DE) |
16:31.05 | [TK]D-Fender | n3llyb0y: Reliably Transmitting (NAT) to 217.10.79.23:5060: <-- also, Sipgate should NOT be considered as being behind NAT. Set all of their entries to "nat=no" |
16:34.21 | n3llyb0y | [TK]D-Fender - thanks man. the autofallthrough fixed it. I'll look at the outgoing sipgate nat settings too. I admit I copy and pasted those |
16:37.29 | *** join/#asterisk crazybyte (~crzp@unaffiliated/crazypenguin/x-000001) |
16:37.52 | *** join/#asterisk sun28 (~light@sun28.ipfw.su) |
16:38.35 | Naikrovek | i'm going to fly to india and smash this dude in the head |
16:38.45 | Naikrovek | not because he's indian |
16:39.21 | Naikrovek | but because he's a moron and despite working where he works for coming up on 5 years he still hasn't a damned clue what he's doing |
16:40.58 | Naikrovek | people like this need to be shunned |
16:41.03 | Naikrovek | there's no penalty for him to be an idiot |
16:41.08 | n3llyb0y | oh man this is just too cool. I'll never need to speak to the mother in-law by accident again. Home IVR is a great. Thanks to all you *ers |
16:41.23 | Naikrovek | asterisk is awesome |
16:42.44 | *** join/#asterisk drmessano (~nonya@pdpc/supporter/active/drmessano) |
16:44.05 | n3llyb0y | the (free) product and (free) support I have receieved to date is fantastic. I have suggested that our corporate Avaya system is in the dark ages in comparison. Will wait and see what comes of that |
16:45.23 | Naikrovek | n3llyb0y: hang out in here for a few weeks and just watch as some of these problems get fixed |
16:45.39 | Naikrovek | any questions about availability of support will vaporize |
16:45.46 | Naikrovek | this is an awesome community |
16:47.50 | n3llyb0y | Naikrovek - I am in no doubt of that. Despite having zero background in telephony I now have a pretty functional pbx all in the space of a couple of weekends. There are things we'd like to do with the telephone systems at work and I'm seeing how we might accomplish that by ditching the proprietary vendor |
16:49.06 | Naikrovek | yeah |
16:49.12 | Naikrovek | asterisk is very competent |
16:49.16 | Naikrovek | very robust |
16:50.28 | n3llyb0y | not only that the API is great. That's my angle. I have to interoperate with the Avaya system at work and quite frankly it's shit |
16:52.05 | n3llyb0y | anyways. thanks again to all. I'm going to go have some beer and think up ways to make the telemarketers life a living HELL |
17:02.13 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
17:02.16 | *** join/#asterisk Taco24501 (~Taco24502@c-67-187-29-41.hsd1.va.comcast.net) |
17:34.53 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
18:19.30 | *** join/#asterisk facet (~huxley@206-248-130-128.dsl.teksavvy.com) |
18:20.55 | spenguin[work] | Naikrovek: get me hired in the indian office ;) |
18:21.53 | spenguin[work] | but I hate working with any sort of windows boxen |
18:30.38 | *** join/#asterisk jhirley (~jhirley@adsl-159-226-91.mia.bellsouth.net) |
18:34.59 | *** join/#asterisk xuser (~xuser@unaffiliated/xuser) |
18:56.22 | Naikrovek | spenguin[work]: are you in india? |
18:56.42 | spenguin[work] | yessir |
18:56.52 | Naikrovek | really |
18:57.02 | spenguin[work] | Mumbai :) |
18:57.27 | Naikrovek | my office there is in hyderabad. and i don't know anyone smart in hyderabad |
18:57.42 | Naikrovek | or i'd hire 'em |
18:57.45 | Naikrovek | or get them hired |
18:57.59 | spenguin[work] | ah ok |
18:59.34 | spenguin[work] | Naikrovek: well yeah theres very few folks _good_ with *nix here Id say, tough to find |
19:00.13 | spenguin[work] | but Hyderabad has some open source talent, atleast better as compared to Mumbai |
19:17.34 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
19:19.39 | spenguin[work] | http://video.fosdem.org/2010/lightningtalks/saturday/11-sat-asterisk.xvid.avi |
19:19.49 | spenguin[work] | if it interests anyone |
19:20.06 | *** join/#asterisk ehsjoar (~ehsjoar@c-98-245-155-132.hsd1.co.comcast.net) |
19:20.45 | ChannelZ | are there boobs in it? |
19:21.53 | spenguin[work] | well if you watch closely |
19:21.57 | spenguin[work] | maybe :p |
19:22.59 | ChannelZ | hmm wrong aspect ratio |
19:23.06 | spenguin[work] | yeah |
19:23.11 | spenguin[work] | its huge |
19:25.12 | ChannelZ | it's supposed to be 860x540 |
19:25.19 | spenguin[work] | heh, he says this channel has some "corky" characters |
19:26.21 | *** join/#asterisk DJF5 (~email@84-105-183-83.cable.quicknet.nl) |
19:26.35 | ChannelZ | quirky |
19:26.52 | spenguin[work] | ok, my bad |
19:27.25 | ChannelZ | I'm sure there are some corky ones (heavy drinkers) |
19:44.25 | *** join/#asterisk antiwire (~antiwire@unaffiliated/antiwire) |
19:54.57 | *** join/#asterisk dennisG (~dennisG@2002:541e:88d0:0:213:2ff:fe56:e380) |
20:08.18 | *** join/#asterisk rare1980_ (~rare1980@115.186.27.108) |
20:10.09 | *** join/#asterisk war9407 (war@liquidswords.org) |
20:18.22 | *** join/#asterisk Chainsaw (~chainsaw@gentoo/developer/atheme.member.chainsaw) |
20:18.57 | TJNII | just found a copy of MSIE3 lurking in some floppies |
20:19.15 | antiwire | omg kill it! |
20:19.55 | TJNII | antiwire: You want a copy? :P |
20:20.09 | antiwire | lol |
20:20.40 | [TK]D-Fender | TJNII: DON'T COPY THAT FLOPPY! |
20:21.02 | spenguin[work] | yeah you cant have it infecting machines |
20:21.13 | spenguin[work] | I thought it was eliminated from society |
20:21.17 | TJNII | [TK]D-Fender: I think I have that somewhere in here..... |
20:28.14 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
20:35.39 | *** join/#asterisk diegomad (mad@186.81.147.70) |
20:38.08 | *** join/#asterisk Taco24501 (~Taco24502@c-67-187-29-41.hsd1.va.comcast.net) |
20:40.16 | ChannelZ | I'm surprised it ever fit on a floppy |
20:42.16 | TJNII | 4 floppies |
20:42.26 | TJNII | Still sealed in the original baggie |
20:43.47 | TJNII | Unfortunately my old 5 1/4" drive doesn't want to cooperate, so I don't think I'll be salvaging any data off my really olf floppies today. |
20:43.53 | TJNII | is cleaning house |
20:45.34 | *** join/#asterisk ChrisWi (~admin@mx2.wwserver.net) |
20:59.23 | Belgarath | hi |
20:59.31 | Belgarath | I am still fighting with sip behind nat |
20:59.44 | Belgarath | can somebody please look at my debug log : http://pastebin.com/V4exbisU |
20:59.49 | Belgarath | and tell me what is wrong ? |
21:00.58 | Naikrovek | spenguin[work]: you missed the kind of joy i had with my indian coworkers this morning |
21:01.35 | Naikrovek | spenguin[work]: pasting me windows cmdline messages stating that the file cannot be found, asking me what to do |
21:01.46 | spenguin[work] | oh man :\ |
21:02.16 | Naikrovek | telling me SSH isn't running, when they were trying to connect to a machine via DNS that didn't have an entry in DNS. they just named the computer xyz and tried to ssh to it |
21:02.31 | Naikrovek | things like that |
21:02.32 | Naikrovek | BASIC stuff |
21:02.34 | Naikrovek | lost |
21:02.40 | Naikrovek | lost on them, rather |
21:03.34 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
21:03.55 | Naikrovek | last guy we hired had a clue, but he left because he had to babysit. we only paid him i think 9 lacs so it's no surprise to me he left |
21:04.01 | spenguin[work] | eh, I can only imagine - well put them through a bunch of tests and, fire + hire |
21:04.31 | Naikrovek | everyone tells me 9 lacs is a lot but when i do the conversion it's like USD$15k/yr |
21:04.54 | spenguin[work] | Naikrovek: in India it is a decent amont |
21:04.56 | Naikrovek | that's 900,000 rupee per year for anyone who wants to know what a lac is |
21:04.58 | spenguin[work] | amount* |
21:05.13 | Naikrovek | okay |
21:05.45 | spenguin[work] | currently gets paid about half of that :s but Ive just got about 3yrs of experience |
21:06.02 | Naikrovek | well the guy who doesn't know squat makes less than you |
21:06.13 | Naikrovek | your english is amazing |
21:06.18 | Naikrovek | i want to hire you :) |
21:06.34 | spenguin[work] | if its voip related, Id be interested :) |
21:06.34 | Naikrovek | hell |
21:06.39 | Naikrovek | you could have a career in the US |
21:06.49 | Naikrovek | and make 10x what you're making there |
21:06.58 | Naikrovek | there's definitely voip work to be done |
21:07.43 | Naikrovek | i think everyone in that office has a traditional phone connected to whatever analog phones connect to |
21:07.49 | Naikrovek | but i'm pushing for voip hard |
21:08.01 | Naikrovek | there are only like 15 phones there now, but like 80 people |
21:08.04 | Naikrovek | and they don't have a server locally |
21:08.07 | Naikrovek | a phone server |
21:08.12 | Naikrovek | so they connect to mine over vpn |
21:08.27 | Naikrovek | mostly it's stable but there are some issues i need resolved |
21:10.43 | Naikrovek | their infrastructure is super old and it all needs rearchitected, so you could have a hand in that if you wanted |
21:10.54 | Naikrovek | you could get to touch anything linux, windows, or cisco related |
21:10.55 | Naikrovek | vmware |
21:10.56 | Naikrovek | asterisk |
21:11.00 | Naikrovek | i REALLY need a guy there |
21:11.14 | Naikrovek | so if you don't want it, that's fine, if you know someone who might be keen, please let me know |
21:11.23 | spenguin[work] | hrm seems interesting Id give the option a thought, really |
21:11.46 | spenguin[work] | may I pm? |
21:11.50 | Naikrovek | spenguin[work]: pm me your email and i'll forward it to the head dude there in that office. |
21:11.52 | Naikrovek | of cource |
21:11.54 | Naikrovek | uhh |
21:11.55 | Naikrovek | of course |
21:12.23 | Naikrovek | head guy nayeem is smart, but overwhelmed. IT is sorely lacking however |
21:16.12 | TJNII | Sometimes I get to play IT support for the Indian software staff. It's ..... fun. |
21:16.52 | TJNII | "It's not booting!" "No, it is done booting. It is at EFI waiting for you. Just like I told you when I closed your ticked 3 hours ago." |
21:18.16 | Naikrovek | it is certainly a challenge |
21:18.17 | Naikrovek | at times |
21:18.30 | *** part/#asterisk antiwire (~antiwire@unaffiliated/antiwire) |
21:20.50 | spenguin[work] | eh Ive worked at dell tech support for a while, made me feel sorry for what you guys go through |
21:31.53 | *** join/#asterisk Slugs_ (~yeah@173-8-52-45-Jacksonville.hfc.comcastbusiness.net) |
21:36.30 | *** join/#asterisk atis_work (~atis_work@193.238.212.171) |
21:40.34 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
21:52.11 | ChannelZ | Belgarath: I see 'UNAUTHORIZED' which seems to imply it has nothing to do with NAT |
21:57.24 | *** join/#asterisk Chainsaw (~chainsaw@gentoo/developer/atheme.member.chainsaw) |
21:58.55 | *** join/#asterisk jhirley_ (~jhirley@adsl-159-228-196.mia.bellsouth.net) |
22:11.19 | Slugs_ | good afternoon ChannelZ |
22:11.40 | *** join/#asterisk sysreq (~sysreq@unaffiliated/sysreq) |
22:13.55 | *** join/#asterisk jhirley_ (~jhirley@adsl-4-166-6.mia.bellsouth.net) |
22:15.13 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
22:17.50 | ChannelZ | aloha |
22:19.10 | *** join/#asterisk mjsilva (~Manuel@mx1.connectinternational.eu) |
22:19.23 | *** join/#asterisk ReDNeQ (~ReDNeQ@70.114.229.58) |
22:25.55 | byteme` | spenguin[work]: I'm working at a startup myself and going through 20 scripts (which are all differnet) that download files from customer websites and then send them to a differnet server. One process I just discovered is sending the file to three different machine ( a linux box, a windows box, and then to another linux box). Each box runs it's own "script" to send the file to the next server. It's just ridiculuous. Yeah IT jobs can really suck. |
22:26.51 | spenguin[work] | byteme`: well automation is good :p |
22:27.04 | byteme` | only if it's done right and it's managable |
22:27.17 | byteme` | if each process is done differnetly, what's the point? |
22:27.26 | spenguin[work] | yeah |
22:28.02 | spenguin[work] | IT jobs get boring when repetative and cant be automated |
22:28.07 | spenguin[work] | or is just a pita to automate |
22:28.37 | byteme` | each transfer has it's own script and it's all different. Not to mention each server downloads the files different ways. It's so screwed up that windows machines are connecting via cifs and download the files and deleting them before another script from another box runs and processes them. You can't scale a business like that |
22:28.52 | spenguin[work] | guh |
22:28.56 | spenguin[work] | ugh* |
22:29.03 | byteme` | spenguin[work]: downloading files are not hard to automate when you have a centralized managed server doing it. |
22:29.17 | byteme` | not 20 machines all downloading files at their own times, with the own scripts, etc etc |
22:30.11 | spenguin[work] | maybe the process needs a change ? :p |
22:30.16 | byteme` | I apparently can't spell or type complete sentences so I guess I should shut up :P |
22:30.40 | Belgarath | byteme`: you should improve the process |
22:30.51 | *** join/#asterisk mhaddog (~mhaddog@83.33.30.137) |
22:30.56 | byteme` | yeah the process needs to change, but that is very painful for most companies. They would rather use the same old broken process than make it better |
22:31.23 | Belgarath | byteme`: do it as transparent for them as possible |
22:31.25 | byteme` | I'm going to however try my best to convince them to let me change it. It's going to be a slow painful process |
22:33.22 | Belgarath | nice quit message |
22:33.23 | Belgarath | :P |
22:42.32 | TJNII | 's OS/2 install media is corrupt. |
22:42.41 | TJNII | So much for that practical joke... |
22:46.52 | ChannelZ | heh |
22:47.11 | ChannelZ | I think the place I used to work has a voicemail system running on OS/2 |
22:51.04 | TJNII | I suppose it could be copy protection, though I can't think of what kind of copy protection could exist on a 1.44MB floppy intended to be read by a DOS system.... |
22:54.00 | *** join/#asterisk JAMMAN2110 (~james@unaffiliated/jamman2110) |
23:03.10 | *** join/#asterisk jksM (jks@193.189.93.254) |
23:10.09 | *** join/#asterisk ChannelZ (channelz@burner.com) |
23:28.14 | *** join/#asterisk romb (~romb@unaffiliated/romb-work/x-7222485) |
23:41.34 | jblack | tjnii: Are you kidding? |
23:41.46 | jblack | there were all kinds of copy protection for floppies. |
23:44.26 | *** join/#asterisk grandpapadot (~nonya@99-175-248-81.lightspeed.brhmal.sbcglobal.net) |
23:44.50 | *** join/#asterisk synaptic2010 (synaptic@95.172.212.88) |
23:45.05 | grandpapadot | Hey guys, when running asterisk as a user it keeps one of my cpu's at 73%, when running as root it's a nice level 0.0, both with no real usage, any ideas what would cause a race condition? I checked all the file permissions. |
23:45.06 | Belgarath | jblack: soem of them still cannot be broken without special hardware |
23:45.08 | grandpapadot | 1.4.30 |
23:45.35 | grandpapadot | .. and this is consistent on 6 identical servers. |
23:45.51 | Belgarath | grandpapadot: looks like some kind of bug/lockup |
23:46.01 | grandpapadot | That doesn't exist when run as root? |
23:46.12 | Belgarath | does it also happens if you put suid on it ? |
23:46.24 | synaptic2010 | hi all |
23:47.00 | grandpapadot | haven't tried that, just running as user "asterisk" from my init script or from the console as "root" |
23:47.21 | Belgarath | you can try running it for a while with strace |
23:47.30 | Belgarath | see if there are any permission denied |
23:47.32 | Belgarath | messagess |
23:47.38 | grandpapadot | good idea, thanks! |
23:47.53 | synaptic2010 | I am looking for some one to teach me asterisk any one? |
23:48.10 | Belgarath | synaptic2010: what do you want to know |
23:48.11 | Belgarath | ? |
23:48.19 | TJNII | jblack: Please enlighten me then, for I am ignorant. |
23:48.38 | synaptic2010 | how to setup, whole sale clients, how to add DID's from Providers |
23:48.48 | Belgarath | TJNII: most of them was using bad bits on the disc |
23:48.59 | Belgarath | that could be read with special code written |
23:49.09 | Belgarath | like you just skipped couple of bytes |
23:49.13 | Belgarath | and there was your data |
23:49.19 | Belgarath | but when yoou use dos commands |
23:49.26 | TJNII | ddrescue would have overcome that. |
23:49.29 | Belgarath | it tried to read the whole block that was broken |
23:49.34 | TJNII | I was trying to image them |
23:49.42 | Belgarath | TJNII: no it wont |
23:49.54 | Belgarath | because whole block copied would eb emptied by ddrescue |
23:50.00 | Belgarath | and vital data would be lost |
23:50.17 | TJNII | I was getting entire disks with only one good sector. |
23:51.10 | Belgarath | the only thing tat they need to put in good sectors was the code to read the rest of the disk |
23:52.00 | TJNII | I see |
23:52.23 | TJNII | What was that code written to? The drive? |
23:52.31 | TJNII | What unlocked the "bad" data? |
23:52.39 | Belgarath | no |
23:52.57 | Belgarath | it was just floppy driver that was skiping the bad bits |
23:53.09 | grandpapadot | Belgarath: Weird, when I kick it off with strace -u asterisk /usr/sbin/asterisk -vvvgc -U asterisk -G asterisk it doesn't spike the CPU, but when I kick it off with the init script (/etc/init.d/asterisk) it does. I don't see anything weird with the init script... hrm |
23:53.18 | *** join/#asterisk Cain (~Geek@unaffiliated/cain) |
23:53.27 | Belgarath | grandpapadot: |
23:53.32 | *** join/#asterisk KavanS (~KavanS@static-173-50-141-22.ptldor.fios.verizon.net) |
23:53.33 | Belgarath | kick it the same way |
23:53.42 | Belgarath | as you did with strace without init.d |
23:53.43 | grandpapadot | so strace the init script? |
23:53.54 | grandpapadot | strace -u asterisk /etc/init.d/asterisk ?? |
23:53.57 | Belgarath | no |
23:53.59 | Belgarath | just |
23:54.09 | Belgarath | /usr/sbin/asterisk -vvvgc -U asterisk -G asterisk |
23:54.20 | Belgarath | after su - asterisk |
23:54.29 | grandpapadot | k, one sec |
23:54.52 | TJNII | You don't have to su to the asterisk user. |
23:55.07 | TJNII | That's what the -U asterisk does. |
23:55.30 | Belgarath | sure |
23:55.33 | Belgarath | stupid me |
23:55.35 | Belgarath | :) |
23:58.18 | grandpapadot | Weird, but only spikes when I initialize through the init script ... |
23:58.47 | Belgarath | grandpapadot: can you paste initscript somewhere |
23:58.48 | Belgarath | ? |
23:59.23 | TJNII | There are some known issues about CPU spiking. I don't remember what they are, though. |
23:59.38 | TJNII | Someone was griping about color options causing that. |
23:59.46 | grandpapadot | Ahaha, one sec, I'm using that. |