| 00:02.55 | *** join/#asterisk jks (jks@193.189.93.254) |
| 00:06.16 | jaytee | hi beek |
| 00:10.46 | *** join/#asterisk Carlos_PHX (~Carlos@ip68-99-199-10.ph.ph.cox.net) |
| 00:17.02 | *** join/#asterisk niekvlessert_ (~niek@5ED25657.cable.ziggo.nl) |
| 00:17.34 | niekvlessert_ | hello! i have a aastra phone behind a nat trying to connect to an asterisk with an external IP |
| 00:17.39 | niekvlessert_ | zoiper works fine |
| 00:17.48 | niekvlessert_ | the aastra phone does register, but no rtp |
| 00:17.53 | aceio | can anyone point to a link on how too configure Digium Wildcard B410P BRI ISDN Card |
| 00:18.14 | niekvlessert_ | aceio: i recommend bristuff |
| 00:19.28 | aceio | <<niekvlessert_>okay i will check that out |
| 00:21.14 | VoIP-Penguin | aceio: Still quoting people with things they aren't saying, I see... |
| 00:21.52 | *** join/#asterisk Miroesq (~Sam@81.10.25.126) |
| 00:22.27 | Miroesq | hi, i am having an issue with DTMF not being recognized by DISA through the PSTN lines on my asterisk setup. can anyone help me with this. |
| 00:22.32 | aceio | sorry i don't understand |
| 00:23.03 | Miroesq | i am running asterisk 1.4 with a digium TDM-400 card |
| 00:23.08 | VoIP-Penguin | aceio: When you want to talk to a person, just type a few letters of his nick and press the tab key to complete it. |
| 00:24.04 | aceio | i see |
| 00:24.46 | VoIP-Penguin | <aceio> i see <--- this is me quoting you, not me talking to you. |
| 00:24.53 | VoIP-Penguin | aceio: This is me talking to you. |
| 00:25.35 | Miroesq | can anyone please help me with DISA DTMF tone recognition? |
| 00:26.24 | VoIP-Penguin | miroesq: You waited THREE WHOLE MINUTES so far. |
| 00:26.29 | aceio | VoIP-Penguin: i understand now |
| 00:26.48 | VoIP-Penguin | aceio: Thanks! It will be much easier to understand things now. |
| 00:27.21 | aceio | VoIP-Penguin: i agree |
| 00:27.54 | Miroesq | VoIP-Penguin: I just saw a whole lot of people in the room, but not a whole lot of activity so was just curious if anyone is available. |
| 00:32.54 | devoid | Okay, that Asterisk book references a "zaptel.conf". Should that be a dahdi.conf instead? |
| 00:35.03 | devoid | Nevermind. I was looking for it in the /etc/asterisk directory instead of the /etc directory. |
| 00:37.57 | *** join/#asterisk chendy (~chatzilla@204.152.211.137) |
| 00:50.30 | *** join/#asterisk micols (~mio@rlogin.dk) |
| 00:56.27 | *** join/#asterisk sourcode (~code@ppp-58-8-236-98.revip2.asianet.co.th) |
| 00:56.40 | *** join/#asterisk micols (~mio@rlogin.dk) |
| 00:58.39 | *** join/#asterisk jmcdowell (~nooe@173-140-28-98.pools.spcsdns.net) |
| 00:58.43 | jmcdowell | ello all |
| 00:58.54 | jmcdowell | anyone have a good read on sip to sip url dialing? |
| 01:09.38 | *** join/#asterisk hipitihop (~denis@CPE-58-161-241-124.mzmy1.cha.bigpond.net.au) |
| 01:10.20 | aceio | any good application for create dialplans |
| 01:13.38 | hardwire | nano works well for me |
| 01:15.49 | *** join/#asterisk pawz (~pawz@ppp118-208-94-150.lns20.bne4.internode.on.net) |
| 01:16.14 | aceio | no i mean a dialplan genrator |
| 01:16.57 | *** join/#asterisk mortsmel (~andrew@65.183.179.53) |
| 01:17.20 | mortsmel | Anyone know of any RT (RequestTracker) + Asterisk plugins |
| 01:18.46 | *** join/#asterisk joako (~joako@opensuse/member/joak0) |
| 01:20.40 | Miroesq | i need help with DISA recognizing DTMF tones |
| 01:21.34 | *** join/#asterisk igorg (~igorg@net182.255.92-116.dynamic.omsk.ertelecom.ru) |
| 01:22.04 | *** join/#asterisk ehsjoar (~ehsjoar@c-98-245-155-132.hsd1.co.comcast.net) |
| 01:22.56 | *** part/#asterisk ecrist (ecrist@pdpc/supporter/professional/ecrist) |
| 01:30.53 | ChannelZ | jmcdowell: how so? |
| 01:31.31 | ChannelZ | Miroesq: does your setup recognize DTMF otherwise? Like in IVRs |
| 01:31.52 | Miroesq | ChannelZ: yes, it is recognized through the voip lines |
| 01:39.32 | Miroesq | ChannelZ: any ideas about the DTMF problem? |
| 01:40.42 | *** join/#asterisk Slugs_ (Slugs_@c-76-97-205-31.hsd1.ga.comcast.net) |
| 01:41.51 | ChannelZ | Not really. I just set it up here and it sort of works, although it seems to echo back the DTMF so badly it's no wonder it doesn't for you |
| 01:42.36 | Miroesq | ChannelZ: it works like 5% of the time, which obviously is a non-starter. thanks for the help :) |
| 01:43.13 | ChannelZ | You can pretty much write your own dialplan which does the same thing |
| 02:00.13 | *** join/#asterisk tengulre (~tengulre@125.71.208.16) |
| 02:06.55 | Katty | peeks in |
| 02:09.50 | Katty | looks around |
| 02:10.51 | Katty | hmm |
| 02:10.53 | Katty | SIP TRUNK |
| 02:10.55 | Katty | waits. |
| 02:15.30 | Katty | :< |
| 02:18.49 | *** join/#asterisk Jhirley (~Jhirley@adsl-161-36-87.mia.bellsouth.net) |
| 02:21.09 | VoIP-Penguin | grumbles |
| 02:24.07 | *** join/#asterisk moy (~moy@CPE001cdfec4cee-CM00080dab8485.cpe.net.cable.rogers.com) |
| 02:38.01 | *** join/#asterisk chendy_ (~chatzilla@204.152.211.137) |
| 02:44.01 | *** join/#asterisk OrNix (~ornix@l151-249-47.static.cn.ru) |
| 02:51.38 | *** join/#asterisk moy (~moy@74.12.130.209) |
| 02:52.52 | *** join/#asterisk chendy (~chatzilla@204.152.211.137) |
| 03:03.11 | *** join/#asterisk Jhirley_ (~Jhirley@adsl-145-35-231.mia.bellsouth.net) |
| 03:06.06 | *** join/#asterisk jblack (~jblack@71.181.168.42) |
| 03:08.36 | *** join/#asterisk fofware (~chatzilla@186.125.110.227) |
| 03:09.52 | *** join/#asterisk wdbl (~not@ool-44c0668f.dyn.optonline.net) |
| 03:20.11 | *** join/#asterisk nickaugust (~anonymous@167.83.189.72.cfl.res.rr.com) |
| 03:23.04 | Katty | 12 minutes until the reconcilation bill is done being voted on |
| 03:23.10 | *** join/#asterisk lmsteffan (~laurent@reef.ac-noumea.nc) |
| 03:23.15 | *** join/#asterisk lmsteffan_ (~lmsteffan@reef.ac-noumea.nc) |
| 03:23.15 | *** join/#asterisk nickaugust (~anonymous@167.83.189.72.cfl.res.rr.com) |
| 03:24.48 | jaytee | da da da daaaa |
| 03:24.51 | jmcdowell | Well |
| 03:25.02 | *** join/#asterisk mog (~mog@c-68-62-169-225.hsd1.al.comcast.net) |
| 03:25.08 | jmcdowell | are you talking about the heath care bill/joke ? |
| 03:25.54 | *** join/#asterisk wdbl (~not@ool-44c0668f.dyn.optonline.net) |
| 03:27.10 | Katty | yes i'm talking about the health care bill which is being voted on right now |
| 03:27.51 | Katty | well the financing bit |
| 03:28.06 | Katty | the healthcare bill was passed already. |
| 03:28.09 | jmcdowell | That bill is an ABSOLUTE joke |
| 03:28.48 | jmcdowell | If I didn't have children, I would cancel my health insurance in protest |
| 03:29.00 | jmcdowell | We can all see how well mandate car insurance has worked out. |
| 03:29.23 | Corydon76-dig | This is offtopic in this channel. Please take it elsewhere |
| 03:29.25 | Katty | heh |
| 03:29.29 | jmcdowell | I don't want to hijack the channel on this, if you want to debate more, pm me |
| 03:29.39 | jmcdowell | iggied |
| 03:29.50 | Katty | i'm not really interested in debating. |
| 03:29.55 | jmcdowell | WeRd |
| 03:30.19 | jmcdowell | It's amazing how little some ops have to say about things like says "Asterisk".. |
| 03:31.42 | Corydon76-dig | I could spend more time on here at the cost of working on Asterisk issues. Which do you think is more important? |
| 03:34.57 | TJNII | thinks we need a #asterisk-chat, just like how Gentoo has #gentoo-chat. Not sure if we're big enough for it, though. |
| 03:35.45 | *** join/#asterisk authorized (~auth23@206.173.193.56.ptr.us.xo.net) |
| 03:36.08 | Corydon76-dig | TJNII: I believe #asterisk is the largest channel on Freenode |
| 03:36.13 | jaytee | talking about politics is soooo boring, now talking about Asterisk or programming, that's HOT!! |
| 03:36.21 | Corydon76-dig | Or most active or something like that. |
| 03:36.46 | jaytee | although I don't mind the occasional squirrel or ferret reference :-) |
| 03:36.46 | TJNII | Probably most active, since I'm also in #gentoo which has 700+ users. |
| 03:37.09 | authorized | puppet has 269 |
| 03:37.11 | TJNII | Though even then that channel can move pretty quick. |
| 03:38.33 | mortsmel | Anyone know of any RT (RequestTracker) + Asterisk plugins ... there was once a app rt_ticket.agi ... can't find a single trace of it ... |
| 03:38.41 | *** join/#asterisk mmlj4 (~jkelly@ip70-171-94-246.no.no.cox.net) |
| 03:39.07 | ChannelZ | has no idea what that even is |
| 03:50.41 | *** join/#asterisk ehsjoar (~ehsjoar@c-98-245-155-132.hsd1.co.comcast.net) |
| 03:50.49 | jmcdowell | You could always ask an op |
| 03:50.59 | jmcdowell | ha ha |
| 03:51.22 | *** join/#asterisk chendy_ (~chatzilla@113.91.38.253) |
| 03:51.45 | TJNII | Make fun of the ops, that's a great idea. |
| 03:51.55 | TJNII | Let's see how long it is before you get banned. |
| 03:51.57 | jmcdowell | Doesn't bother me |
| 03:52.03 | jmcdowell | it's the IRC dood |
| 03:52.11 | jmcdowell | not the end of the world for me |
| 03:52.13 | TJNII | Oh, and iirc Corydon76-dig is a dev. |
| 03:52.21 | jmcdowell | Again, don't care |
| 03:52.33 | jmcdowell | We should all be critisized |
| 03:53.03 | jmcdowell | I am all the time, I don't typically go off the deep end on those that do. Tends to make me think,. |
| 03:56.13 | Katty | k, bed time for real. |
| 03:56.25 | TJNII | Night Katty |
| 03:58.00 | Miroesq | can someone please help me with DTMF tones to DISA? |
| 03:59.12 | jmcdowell | What's your Q ? |
| 04:00.22 | Miroesq | i'm running asterisk 1.4 with a digium tdm400 card attached. when i call into the pstn line using my cell phone, the dtmf tones are not recognized. |
| 04:00.53 | hardwire | can you pastebin your dahdi/zapata config? |
| 04:01.21 | TJNII | Are they not recognised only in DISA, or in everything? |
| 04:01.30 | *** join/#asterisk chendy_ (~chatzilla@204.152.211.137) |
| 04:02.07 | hardwire | weird.. letters are blending together.. time to go offline |
| 04:02.09 | Miroesq | well, DISA is the only way that i can get into my box from the pstn. when i get into the box using the VoIP, there is absolutely no problems with the DTMF |
| 04:02.22 | hardwire | DISA isn't specific to PSTN |
| 04:02.31 | hardwire | are you running DISA() in your dialplan? |
| 04:02.45 | Miroesq | jmcdowell: do you mean paste my zapata config file into this chat room? |
| 04:02.55 | *** join/#asterisk jmcdowell (~nooe@173-140-28-98.pools.spcsdns.net) |
| 04:02.58 | hardwire | Miroesq: do that only if you wish for the sweet release of death |
| 04:03.00 | jmcdowell | have you read this ? |
| 04:03.03 | jmcdowell | http://www.voipuser.org/forum_topic_4222.html |
| 04:03.09 | Miroesq | i have nothing specific for DISA in my dialplan |
| 04:03.32 | Miroesq | i have done a lot of research, but i will check it out now. |
| 04:03.33 | jmcdowell | A quick google search reveals that you may not be the only one that has had this problem. |
| 04:04.05 | Miroesq | yes, a lot of people are having this issue, but i don't know how to overcome it, i went to asterisk 1.6, but still the same |
| 04:04.24 | jmcdowell | that read I just pasted appers to have work for others. |
| 04:04.35 | Miroesq | hardwire: canm u please tell me more about this running of DISA in the dial plan |
| 04:04.37 | jmcdowell | I am ALL digital, is there any reason you can't do the same? |
| 04:05.11 | Miroesq | jmcdowell, yes, i need to access my box from the outside so i can make internationla calls through my voip |
| 04:05.33 | jmcdowell | You mean you need to be able to dial in? |
| 04:05.44 | jmcdowell | Because you could still do that using all digital. |
| 04:06.20 | Miroesq | yes, how do i dial in if i don't do it through the pstn? note, i am not in the US where i have my voip account. |
| 04:06.39 | VoIP-Penguin | Sounds like you need a DID. |
| 04:06.50 | VoIP-Penguin | ~did |
| 04:06.51 | infobot | i heard did is Direct Inward Dialing, or just a phone number |
| 04:06.54 | jmcdowell | You get a did |
| 04:06.56 | jmcdowell | just as he said |
| 04:07.07 | Miroesq | they don't have DIDs in Egypt |
| 04:07.13 | jmcdowell | SOOOO much easier than what you are going through |
| 04:07.22 | jmcdowell | What? |
| 04:07.24 | hardwire | Miroesq: I sent you a PM if you want I can help you work on it. |
| 04:07.30 | Miroesq | jmcdowell: read your link, i have already tried the Rx levels and nothing |
| 04:07.44 | VoIP-Penguin | Why can't you get a phone number from the telco? |
| 04:07.45 | Miroesq | hardwire: thank u so much!!! i will check it out now |
| 04:08.08 | jmcdowell | I will take your word for it, but would love to know why this is an issue for you. |
| 04:08.09 | Miroesq | VoIP-Penguin: I am unaware that they have DIDs in Egypt. |
| 04:08.18 | hardwire | Miroesq: the PM shows up in a different tab in your IRC program, not sure how familiar you are with IRC |
| 04:08.20 | jmcdowell | the did situation that is. |
| 04:08.45 | VoIP-Penguin | miroesq: I'm sure the phone company has phone numbers for you. |
| 04:10.21 | jmcdowell | give me an Egypt number |
| 04:10.23 | jmcdowell | any number |
| 04:10.29 | Miroesq | VoIP-Penguin: I will check it out, but they are anti-voip in this country |
| 04:10.48 | Miroesq | jmcdoweel: +20(2)2203-4444 |
| 04:10.49 | VoIP-Penguin | miroesq: I'm talking about the telco; no VoIP involved. |
| 04:11.08 | Miroesq | i don't get it. |
| 04:11.29 | VoIP-Penguin | Telephone companies provide telephone numbers. |
| 04:12.15 | Miroesq | i have a local number in egypt. this number is connected to my asterisk via a digium tdm-400 card. when i call that number it is automatically passed to my DISA. when i hear the DISA dial tone and press the number i want to call, it is not recognized, but rather just disconnects me |
| 04:12.37 | VoIP-Penguin | Why are you even using DISA at all? |
| 04:12.55 | jmcdowell | Yeah, I would just us "7" to get out to my international carrier. |
| 04:14.04 | *** join/#asterisk chendy_ (~chatzilla@204.152.211.137) |
| 04:14.13 | Miroesq | i'm using DISA, because i'm outside the house when i want to make a call. like driving in the car |
| 04:14.31 | VoIP-Penguin | I haven't been here for most of your discussion, but I thought you were having trouble getting calls into your Asterisk system. |
| 04:15.04 | Miroesq | no, not at all. i am having problems calling in on the pstn line then getting an outside voip line so i can dial internationally |
| 04:16.21 | VoIP-Penguin | Have you pasted your dialplan into a pastebin yet? |
| 04:16.27 | VoIP-Penguin | ~pb |
| 04:16.28 | infobot | [~pb] A "pastebin" is a web-based service where you should paste anything over 3 lines so you don't flood the channel. Here are links to a few : http://www.pastebin.com , http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org , http://bin.cakephp.org/ , http://asterisk.pastey.net/ , or install pastebinit with yum or aptitude. |
| 04:16.48 | *** join/#asterisk chendy_ (~chatzilla@119.139.17.46) |
| 04:18.16 | jmcdowell | I don't really have any experience with fxo cards and such |
| 04:18.23 | jmcdowell | so I am going to have to sit this one out. |
| 04:18.54 | VoIP-Penguin | So the call reaches * and then what happens next? |
| 04:24.36 | Miroesq | then 95% of the time the call is dropped after i dial the number that i want to call. |
| 04:24.44 | Miroesq | rarely would the call go through. |
| 04:25.48 | Nugget | http://www.youtube.com/watch?v=LfPlQP3-b8c <-- VoIP-Penguin |
| 04:25.53 | hardwire | hmmphm.. my listing for a TE410P+echocan expired. |
| 04:28.05 | VoIP-Penguin | nugget: You think they still have any copies left? |
| 04:28.25 | Nugget | sure, but I doubt you'll get your free caculator wristwatch if you order a set. |
| 04:28.36 | VoIP-Penguin | dammit! |
| 04:28.55 | VoIP-Penguin | I've never had a calculator watch before... |
| 04:29.10 | VoIP-Penguin | But I have had a TV remote controller watch! |
| 04:30.19 | Nugget | http://www.amazon.com/Computer-Languages-Understanding-Computers-Time-Life/dp/080947574X/ <-- ha ha "10 new..." |
| 04:30.25 | TJNII | I had a USB watch. 512M, which wasn't that bad 6 years ago. |
| 04:31.02 | TJNII | I had to carry a cord to use it though, which kind of defeated the purpose. |
| 04:31.02 | VoIP-Penguin | Hmm, I got that in the mid-to-late '90s... I wonder if I still have it stored away somewhere. |
| 04:31.35 | VoIP-Penguin | I bet it won't work with a lot of today's IR devices. |
| 04:34.11 | hardwire | TJNII: leet |
| 04:34.21 | VoIP-Penguin | I did have some friends that had the calculator watches probably in the '80s when I had a Casio "time zone" watch. That watch lasted me a long time! |
| 04:38.00 | *** join/#asterisk nickaugust (~anonymous@167.83.189.72.cfl.res.rr.com) |
| 04:54.34 | *** join/#asterisk dkirker-openmobl (~dkirker@openmobl/ceo/dkirker) |
| 05:00.17 | *** join/#asterisk fskrotzki_ (~fskrotzki@cpe-74-74-245-250.rochester.res.rr.com) |
| 05:03.26 | *** join/#asterisk hardwire (~spencersr@69-161-26-211.static.acsalaska.net) |
| 05:10.07 | *** join/#asterisk DerkKo (~afernande@75-149-178-131-Miami.hfc.comcastbusiness.net) |
| 05:16.45 | *** join/#asterisk JAMMAN2110 (~james@unaffiliated/jamman2110) |
| 05:31.09 | *** join/#asterisk tzafrir (~tzafrir@bzq-218-155-170.cablep.bezeqint.net) |
| 05:39.48 | *** join/#asterisk Cain` (~Geek@unaffiliated/cain) |
| 05:44.09 | ChannelZ | hmm..Breaking Bad premire was kind of weak |
| 05:49.01 | *** join/#asterisk chendy (~chatzilla@204.152.211.137) |
| 05:55.59 | *** join/#asterisk OrNix (~ornix@host89-251-107-3.hnet.ru) |
| 06:12.01 | jmcdowell | has anyone here ever used a USB sound card with asterisk ? |
| 06:18.30 | ChannelZ | sort of |
| 06:19.03 | ChannelZ | I played with my Fast Track Ultra for feeding live MOH once |
| 06:21.15 | b14ck | sup everyone |
| 06:21.40 | hardwire | I'm gonna go to sleeeeep |
| 06:21.48 | hardwire | jmcdowell: if it's alsa.. does it matter? |
| 06:25.51 | *** join/#asterisk aidinb (~Aidin@66-214-227-203.dhcp.lnbh.ca.charter.com) |
| 06:26.40 | *** join/#asterisk redax (redax@r6.hu) |
| 06:26.43 | redax | good morning, |
| 06:27.33 | redax | what kernel shall I build for 2x quadBRI isdn card asterisk installation? should I choose the Preemptible Kernel ? |
| 06:31.09 | jmcdowell | hardwire : I hear ya, but I have just never done it. |
| 06:31.24 | jmcdowell | I am ordering an audigy usb rather than the low end brand. |
| 06:44.32 | *** join/#asterisk Da-Geek (~Da-Geek@93-172-153-99.bb.netvision.net.il) |
| 06:47.05 | *** join/#asterisk Rajmohan (~raj@122.164.183.105) |
| 06:48.16 | Rajmohan | hello |
| 06:57.13 | *** join/#asterisk ktwilight[m] (~ktwilight@91.179.90.51) |
| 06:59.04 | ChannelZ | hi |
| 06:59.45 | *** join/#asterisk maxagaz (~maxagaz@soho2.i-xanadu.com) |
| 07:10.26 | *** join/#asterisk tzafrir (~tzafrir@local.xorcom.com) |
| 07:15.39 | *** join/#asterisk Ad-Hoc (~nimbus@62.169.216.185) |
| 07:18.42 | *** join/#asterisk e-jones (~jkastner@nat/redhat/x-qnvvqdwrecuwrnsn) |
| 07:26.15 | Ad-Hoc | hi |
| 07:26.35 | ChannelZ | oi |
| 07:28.11 | aceio | hi all which is the best to use sccp or sip |
| 07:29.00 | aceio | i know sip is default , how much work will i need to run sccp |
| 07:29.58 | *** join/#asterisk smooth_penguin (~smoove@59.95.52.160) |
| 07:30.03 | *** join/#asterisk Da-Geek (~Da-Geek@93-172-153-99.bb.netvision.net.il) |
| 07:33.58 | *** join/#asterisk grEvenX (~even@apb9hb.ip.ssc.net) |
| 07:38.18 | *** join/#asterisk mintos (~mvaliyav@nat/redhat/x-egviozyqyrwgkfqm) |
| 07:39.24 | *** join/#asterisk ectospasm (~weechat@24.42.221.223) |
| 07:42.14 | *** join/#asterisk GameGamer43|Mac (~GameGamer@CPE-65-27-76-78.new.res.rr.com) |
| 07:48.16 | *** join/#asterisk Da-Geek (~Da-Geek@93-172-153-99.bb.netvision.net.il) |
| 08:11.42 | *** part/#asterisk aceio (~c2cbd7fe@gateway/web/freenode/x-ohosuhnirkaiztro) |
| 08:16.35 | *** join/#asterisk pif (~ldm@zenon.apartia.fr) |
| 08:19.35 | *** join/#asterisk dandre (~daniel@ble59-2-81-56-122-47.fbx.proxad.net) |
| 08:20.44 | *** join/#asterisk Faustov (user@gentoo/user/faustov) |
| 08:27.38 | *** join/#asterisk hehol (~hehol@buero-gw.dortmund.loca.net) |
| 08:35.42 | *** join/#asterisk gr0mit (~tim@extrt.txrx.org.uk) |
| 08:38.41 | *** join/#asterisk chilicuil (~chilicuil@unaffiliated/chilicuil) |
| 08:43.10 | *** join/#asterisk CoderForLife (~Miranda@cpe-174-101-155-51.cinci.res.rr.com) |
| 08:51.08 | *** join/#asterisk tamiel (~tamiel@213.30.183.226) |
| 08:52.33 | *** join/#asterisk Aven (~avenger@78.36.107.48) |
| 08:53.44 | *** join/#asterisk soman (~somnath@stargate.starnet.fi) |
| 08:53.50 | *** join/#asterisk ickmund (~magnus@ada-bcn-fw01.adamoeurope.com) |
| 09:01.57 | *** join/#asterisk eharris (UNKNOWN@99-179-7-82.lightspeed.austtx.sbcglobal.net) |
| 09:02.36 | *** join/#asterisk KermitTheFragger (~KermitThe@118-197.bbned.dsl.internl.net) |
| 09:05.28 | *** join/#asterisk grEvenX (~even@apb9hb.ip.ssc.net) |
| 09:10.18 | *** join/#asterisk c0rnoTa (~c0rnoTa@178.176.183.86) |
| 09:11.13 | *** join/#asterisk krion (~seb@unaffiliated/krion) |
| 09:12.19 | *** join/#asterisk Toommi (~name@geldern.screenwork.de) |
| 09:14.10 | Toommi | can somebody tell me where this comes from : snom360 if somebody calls e.g. extension 12 you see on the phone 15 that 12 is being called? |
| 09:18.06 | *** join/#asterisk chendy (~chatzilla@119.139.17.46) |
| 09:25.08 | *** join/#asterisk chendy_ (~chatzilla@119.139.19.241) |
| 09:35.04 | *** join/#asterisk darkskiez (~dz@62-50-207-45.client.stsn.net) |
| 09:35.28 | *** join/#asterisk Z_God (~julius@130.89.232.194) |
| 09:39.30 | *** join/#asterisk bzing2 (~dr105@dhcp-194-66-208-235.canterbury.ac.uk) |
| 09:41.26 | TommyBotten | Toommi: Could you please rephrase? |
| 09:41.53 | *** join/#asterisk chendy_ (~chatzilla@204.152.211.137) |
| 09:47.18 | *** join/#asterisk mikkel (~mikkel@130.226.36.170) |
| 09:48.04 | Toommi | TommyBotton: example: you got 3 extension a ist calling b and you see on the display of c that b is ringing, but i didn't change thing and i dont know what feature this is |
| 09:50.14 | *** join/#asterisk hakr (~hakr@71-81-206-88.dhcp.stls.mo.charter.com) |
| 09:50.27 | Toommi | i have installed asterisk 1.6.2 with addons phones are snom360 an firmware 7.3.30 |
| 09:53.14 | *** join/#asterisk mike8 (~mike@c14.audioline.ba.cust.gts.sk) |
| 09:53.35 | TommyBotten | Ah... that is probably Hints |
| 09:53.37 | TommyBotten | ~hints |
| 09:54.11 | TommyBotten | http://www.voip-info.org/wiki/view/Asterisk+standard+extensions and http://www.voip-info.org/wiki/view/Asterisk+cli+show+hints |
| 09:54.21 | TommyBotten | There isn't really any good documentation on this :( |
| 09:55.47 | Toommi | oh god |
| 09:55.48 | Toommi | i love |
| 09:55.49 | Toommi | u |
| 09:55.49 | Toommi | :D |
| 09:56.14 | *** join/#asterisk Godfather_ (~Godfather@157.Red-88-11-88.dynamicIP.rima-tde.net) |
| 10:07.10 | *** join/#asterisk mintos (~mvaliyav@nat/redhat/x-fkjzgnkpekvbohgv) |
| 10:12.34 | *** join/#asterisk cuco (~elcuco@local.xorcom.com) |
| 10:13.23 | cuco | i am trying to debug some dialplan. i am using "noop" but they are not beeing displayed in the logs, and I have verbosity set to 3. What else should I look into? |
| 10:13.44 | *** join/#asterisk mbranca (~matteo@host139-217-static.224-95-b.business.telecomitalia.it) |
| 10:14.46 | tzafrir | cuco, logger show channels ? |
| 10:15.01 | *** join/#asterisk dwarken (~chatzilla@1405ds1-svo.0.fullrate.dk) |
| 10:15.37 | cuco | tzafrir: sorry, lost you there |
| 10:17.40 | TommyBotten | cuco: That is a CLI command. |
| 10:17.49 | dwarken | Need help getting Maximum channels work on a Siptrunk for incomming calls, i'm using asterisk 1.4 and i have tried the latest svn also... |
| 10:19.28 | TommyBotten | dwarken: Maximum channels? ... Are you asking about scaling? |
| 10:21.12 | dwarken | TommyBotten: i need to restrict the number of incomming calls and if they are exceeded they are going to be redirected to another number :) |
| 10:22.11 | cuco | TommyBotten: i know that, but you don't know is that i am tyring to hack around DEVICE_STATE(), and I did not see my "noop" commands... |
| 10:23.07 | Godfather_ | dwarken, restric the number of calls into a phone? |
| 10:23.09 | TommyBotten | cuco: You could try using verbose() instead? |
| 10:23.31 | TommyBotten | cuco: If the other statements are executed |
| 10:24.21 | dwarken | Godfather_: i have 4 phones and i need to restrict the number of simultaneous calls to about 3, |
| 10:24.44 | Godfather_ | dwarken, 4 phones with the same extension no? |
| 10:25.27 | dwarken | Godfather_: nope, every phone got their own ext number.. |
| 10:26.07 | cuco | TommyBotten: verbose is 1.6? |
| 10:26.09 | Godfather_ | dwarken, well, i'm not pretty sure what you'are trying to do, but a global var should work for you |
| 10:26.13 | kaldemar | dwarken: use GROUP functions |
| 10:27.20 | TommyBotten | cuco: Not really sure. It works in 1.6.0.x |
| 10:27.20 | dwarken | kaldemar: i have read about it but i really dont get it.. :) i have build and installed asterisk with the newsest groupcount that should fix it but i dosent.. :) |
| 10:28.39 | kaldemar | dwarken: you need to use the functions in your dialplan and tell asterisk what to do. if you already have something you've done, pastebin it and someone will surely tell you what you're missing. |
| 10:28.44 | cuco | TommyBotten: you might guess what i am going to tell you now :) |
| 10:29.08 | TommyBotten | cuco: You are running 1.0? :D ... Or 1.4 doesn't have it? |
| 10:29.20 | redax | is dahdi wcb4xxp works for Junghanns QuadBRI ? (formely qozap) |
| 10:29.52 | cuco | TommyBotten: don't remind m the good old days of 1.0.11 ... nope, 1.4.29 does not have it |
| 10:40.45 | *** join/#asterisk c0rnoTa (~c0rnoTa@178.176.167.140) |
| 10:40.59 | *** join/#asterisk sulex (~sulex@88-149-154-95.static.ngi.it) |
| 10:43.31 | TommyBotten | Is there a way to preserve a channel variable from context,s,n to context,h,n ? I'm using Asterisk 1.6.2.6 and the built in lua interpreter. |
| 10:44.53 | kaldemar | a context change is irrelevant, what matters is the channel. |
| 10:46.18 | TommyBotten | ok. Well, the context is the same. And the channel is hung up as 'h' is initiated. |
| 10:46.51 | TommyBotten | Will all variables be empty once 'h' is called? |
| 10:47.03 | kaldemar | no |
| 10:47.11 | TommyBotten | Sorry.. bad explanation |
| 10:47.29 | TommyBotten | I can get to default variables. But the ones i create myself, are empty. |
| 10:59.39 | *** join/#asterisk cm_ (~chris@datura-v2.ielf.org) |
| 11:05.57 | *** join/#asterisk cm_ (~chris@datura-v2.ielf.org) |
| 11:23.56 | *** join/#asterisk Tim_Toady (~moi@77.49.45.81.dsl.dyn.forthnet.gr) |
| 11:27.28 | *** join/#asterisk smooth_penguin (~smoove@59.95.21.3) |
| 11:27.54 | *** join/#asterisk adnc (~numer@unaffiliated/adnc) |
| 11:29.43 | adnc | hello, i've a voicemailbox set up. when someone calls and reaches the voicemail the voicemail answers with the internal number announcing "3322 is not available etc..." is it possible to have the voicemail answer announce my external number? |
| 11:30.44 | *** join/#asterisk dennisG (~dennisG@2002:541e:88d0:0:213:2ff:fe56:e380) |
| 11:31.03 | redax | hm. in testing or squeeze why the heaven I cant specify bigger Start value than 19 |
| 11:31.14 | redax | sorry wrong place |
| 11:45.24 | Toommi | hey i got an other question i use Set(DEVICE_STATE(device)=ONHOLD); to show something with the leds on snom 360 but if the dev state ist onhold i can't use the key anymore :/ any ideas? |
| 11:51.46 | *** join/#asterisk otavio (~otavio@debian/developer/otavio) |
| 11:53.12 | dwarken | i need help on making a dialplan for limiting incomming calls, http://pastebin.com/Dwf5zN7Y there is some info on what i'm trying to do... hope someone can help.. I'm using SIP/VOIP |
| 11:53.29 | dwarken | using asterisk 1.4 BTW |
| 12:00.34 | *** join/#asterisk sarthor (~sarthor@unaffiliated/sarthor) |
| 12:01.37 | *** join/#asterisk dwarken (~chatzilla@1405ds1-svo.0.fullrate.dk) |
| 12:01.55 | TommyBotten | dwarken: Is it just the one extension, or is it several? |
| 12:02.58 | kaldemar | dwarken: you're setting group to ${CALLERID(num)} but checking a group called ${EXTEN}. those don't match. |
| 12:03.29 | dwarken | TommyBotten: i have extension 600 that is a ringgroup of the phones in this house.. if more than 3 calling then they have to be redirected to extension number 900 ringgroup of another company.. |
| 12:03.47 | dwarken | kaldemar: i couldnt find much info on how to make it.. :) |
| 12:05.57 | *** join/#asterisk dwarken (~chatzilla@1405ds1-svo.0.fullrate.dk) |
| 12:10.42 | TommyBotten | Isn't it possible to use queues for this instead? |
| 12:11.09 | dwarken | TommyBotten: i wish i knew how.. :) The extension number 900 is a local telephone number in my country... |
| 12:11.31 | dwarken | 900 dials another number... |
| 12:12.39 | TommyBotten | If you create a queue with three agents, ringall strategy, and a maximum amount of callers in the queue to three. and then just pass the rest on to the 900-number |
| 12:12.45 | *** part/#asterisk hackt0r (~hackt0r@lounge.datux.nl) |
| 12:12.52 | TommyBotten | That should fix it, as far as I have understood your issue |
| 12:13.23 | *** join/#asterisk [TK]D-Fender (~chatzilla@216.191.106.163) |
| 12:17.07 | sarthor | Hi, I am very much now to asterisk, but know 2 out of 10 about linux. i want to install/configure asterisk server just for learning in my home, I have 4 MB DSL line and Modem, i have 4 computers, I have computer installed with Ubuntu server 9.10, and i can install any OS for learning asterisk installation, i have an extra pc with 160GB hard, 2 GB ram p4 mother board.. what more i will need .. |
| 12:17.31 | sarthor | Hi, I am very much new to asterisk, but know 2 out of 10 about linux. i want to install/configure asterisk server just for learning in my home, I have 4 MB DSL line and Modem, i have 4 computers, I have computer installed with Ubuntu server 9.10, and i can install any OS for learning asterisk installation, i have an extra pc with 160GB hard, 2 GB ram p4 mother board.. what more i will need .. |
| 12:21.46 | dwarken | TommyBotten: i'll try that... :) Thx |
| 12:22.00 | TommyBotten | You don't really need anything else. If you have two computers with a recent ubuntu server, you can just do 'apt-get install asterisk', and you will have a plain installation. |
| 12:22.31 | TommyBotten | sarthor: From there on, you should probably start linking two servers together and route telephone calls through them. |
| 12:22.51 | [TK]D-Fender | sarthor: Your modem is useless with Asterisk. You'll need other equipment if you want to connec to physical lines. Other than that... * is juse software |
| 12:23.57 | sarthor | Will i need to purchase some service too? |
| 12:24.22 | [TK]D-Fender | sarthor: Only if yuo want a service that costs |
| 12:25.02 | [TK]D-Fender | sarthor: You certainly don't need one to learn * |
| 12:25.52 | sarthor | I actually want to the people call my number, and they connect to some automatic server, and after pressing desired button the call get redirect to any desired extention. |
| 12:28.03 | TommyBotten | In that case you need a SIP vendor or a hw card and ISDN/analog/... line |
| 12:28.16 | TommyBotten | SIP provider is usually the simplest and cheapest |
| 12:28.57 | dwarken | TommyBotten: i dont think it works with a queue i think i need to give some more info.... i need to limit so that i can only talk to 3 ppl that is calling at the same time... if more ppl calling while the 3 lines a busy then it has to be redirected.. :) |
| 12:30.04 | TommyBotten | Ah. |
| 12:30.11 | TommyBotten | Hmm... |
| 12:30.36 | [TK]D-Fender | sarthor: And how does your "number" arrive at your server? |
| 12:31.42 | sarthor | [TK]D-Fender, my number is a normal landline number, i dont need any special number, like 111 111 111. just a test. |
| 12:32.24 | [TK]D-Fender | sarthor: I asked how it ARRIVES at your server |
| 12:33.28 | dwarken | kaldemar: is this better?? http://pastebin.com/yehQi4Kb |
| 12:33.36 | sarthor | [TK]D-Fender, i am not able to get your question, Sorry bro. |
| 12:34.40 | [TK]D-Fender | sarthor: .... what phsycial line, or internet service, etc physically carries this call to your server? Do you already already have this "number"? |
| 12:34.46 | TommyBotten | As of now it doesn't |
| 12:34.54 | TommyBotten | ehm.. sorry, wrong window :> |
| 12:35.27 | beek | <PROTECTED> |
| 12:37.17 | *** join/#asterisk rossand (~aross@CPE000c413a19a3-CM00159a025ad4.cpe.net.cable.rogers.com) |
| 12:38.42 | redax | trying to install a Junghanns quad BRI card using dahdi/wcb4xxp |
| 12:39.06 | redax | the driver recognises the cards, just no L1 link and so on. |
| 12:39.23 | redax | do you have any idea what did I missconfigured? |
| 13:20.05 | *** join/#asterisk infobot (ibot@rikers.org) |
| 13:20.05 | *** topic/#asterisk is Asterisk: The Open Source PBX and Telephony Platform (asterisk.org) -=- Asterisk 1.6.2.6, 1.6.1.18, 1.6.0.26 (2010/03/12), 1.4.30 (2010/03/12), *-Addons 1.6.2.0 (2009/12/18), 1.6.1.2, 1.6.0.4, 1.4.10 (2009/12/02), dahdi-linux 2.2.1 + dahdi-tools 2.2.1 (2010/01/20), Libpri 1.4.10.2 (2009/10/20) -=- Related channels: #asterisknow,#switchvox,#freepbx,#asterisk-dev,#asterisk-bugs |
| 13:20.06 | redax | now I tried the trunk dahdi, it detects the cards, but no L1 Link on the interfaces |
| 13:21.13 | mchou | Is there a free online tool to help me understand where the bottleneck is coming from? I've got terrible latency |
| 13:21.39 | Katty | hi |
| 13:21.45 | TommyBotten | mchou: 'the' bottleneck? |
| 13:21.53 | mchou | TommyBotten: heh |
| 13:22.02 | mchou | TommyBotten: you're right of course |
| 13:22.13 | mchou | could be plenty of places |
| 13:22.28 | *** join/#asterisk sjb_gt (~sachajber@71.15.84.164) |
| 13:22.45 | mchou | TommyBotten: but something very very wrong here as they say :) |
| 13:23.46 | TommyBotten | Did you explain your issue? ... I can't find any in the chat logs... what is the problem? |
| 13:25.46 | mchou | TommyBotten: What's there to explain? I've got rtp latencies that exceed 350ms on echo test to remote * server. Need a tool to help me diagnose and solve the bottleneck. |
| 13:26.27 | mchou | TommyBotten: basic qualify the network stuff |
| 13:28.15 | Gugge | and the network is fine? |
| 13:28.35 | TommyBotten | mchou: how about the SIP-messages?.. same latency? |
| 13:28.37 | *** join/#asterisk bsaxon (~bsaxon@12.68.234.174) |
| 13:28.43 | mchou | Gugge: umm, I trying to figure out if the network is fine |
| 13:28.47 | Gugge | ping |
| 13:29.04 | mchou | TommyBotten: I dont care if sip messages have latency |
| 13:29.26 | TommyBotten | of course you do. It is an indicator of network issues. |
| 13:29.29 | mchou | that's nowhere as important as minimizing rtp latency |
| 13:29.31 | Gugge | mchou: maybe the latency on the sip messages can tell you something to help you fix the rtp latency, so _care_ |
| 13:29.34 | Toommi | can i use sendtext to send a text to an extension ?^^ |
| 13:29.36 | *** part/#asterisk manxpower (~ewieling@216.186.151.147) |
| 13:30.49 | mchou | Gugge: maybe? |
| 13:31.22 | Gugge | mchou: depending on what the latency is, it could help you |
| 13:31.34 | mchou | Gugge: let's just say I have SIP latency. how exactly does that tell me how to fix my rtp latency? |
| 13:31.35 | Gugge | so when someone trying to help you ask about it, dont say you dont care |
| 13:31.42 | Gugge | find out, and answer |
| 13:31.52 | TommyBotten | Using a simple 'sip show peers' should give you the SIP latency in the right column (status) |
| 13:31.59 | Katty | sighs |
| 13:32.00 | mchou | lol |
| 13:32.16 | mchou | you guys are rich |
| 13:32.16 | beek | hugs Katty |
| 13:32.22 | Katty | hugs beek |
| 13:32.24 | dennisG | mchou just try wireshark/tshark for the packet stuff and traceroute for the pings between hops ;) |
| 13:32.40 | TommyBotten | You know what... with that attitude, screw you... |
| 13:32.46 | Gugge | mchou: if everything is lagging, i would say its the network, or the machine running asterisk thats lagging |
| 13:32.50 | mchou | dennisG: yeah, exactly :) |
| 13:33.16 | Gugge | mchou: if only rtp is lagging, then the network is probably fine |
| 13:33.34 | Gugge | mchou: but i can only guess, as i dont have access to your network :) |
| 13:34.11 | *** join/#asterisk Cain` (~Geek@unaffiliated/cain) |
| 13:34.25 | mchou | Gugge: please, I don't think I need your help |
| 13:34.42 | dennisG | :/ he mate, he's trying to help you :S |
| 13:35.10 | Gugge | mchou: fine, but if you want it im here. |
| 13:35.31 | Gugge | mchou: but there is no tool that can tell you where your problem is just by running it |
| 13:35.45 | mchou | Gugge: I didn't ask for that |
| 13:35.48 | dennisG | yeah gugge tell him :P |
| 13:35.54 | dennisG | haha |
| 13:36.05 | Gugge | "<mchou> Is there a free online tool to help me understand where the bottleneck is coming from? I've got terrible latency" <- okay |
| 13:36.12 | mchou | wth? |
| 13:36.19 | *** join/#asterisk Cain (~Geek@unaffiliated/cain) |
| 13:36.41 | TommyBotten | hehe |
| 13:36.53 | TommyBotten | maybe you can find it as software as a service somewhere :D |
| 13:37.03 | dennisG | haha :P |
| 13:37.05 | mchou | yeah, a free tool for simulateling an rtp stream, jitter, whatever |
| 13:37.16 | mchou | it aint rocket science |
| 13:37.45 | Gugge | you allready have the perfect tool, a sip device and asterisk :) |
| 13:37.57 | dennisG | mchou, just call from extension to extension and keep the line open :P |
| 13:38.12 | dennisG | play some music on hold or something like that |
| 13:38.15 | mchou | you guys make my look like I'm the idiot but you guys obviously have no idea about voip network qualification |
| 13:38.27 | TommyBotten | hehehe |
| 13:38.28 | dennisG | open wireshark and just sit back and enjoy the thousands RTP packets ! |
| 13:38.43 | Gugge | mchou: how would an online tool running on the public internet tell you about _your_ network qiality ? |
| 13:38.45 | Gugge | quality |
| 13:38.51 | mchou | lol |
| 13:38.54 | dennisG | mchou, if you think that :P |
| 13:39.27 | mchou | my network quality? I have no latency on my LAN :) |
| 13:39.33 | mchou | lol |
| 13:39.44 | TommyBotten | dennisG is perfectly right. Establish a call, use wireshark/similar and watch those packets. |
| 13:39.48 | mchou | who's on first? |
| 13:40.33 | Gugge | mchou: by "your network" i mean the path between your equipment |
| 13:40.41 | mchou | oh lord |
| 13:40.51 | Gugge | but you did not tell is anything about where your asterisk is, so im just guessing |
| 13:41.00 | mchou | Gugge: Like I said b4, I dont need your help |
| 13:41.03 | *** join/#asterisk chuckf (~chuckf@ubuntu/member/chuckf) |
| 13:41.09 | Gugge | then shut up :) |
| 13:41.24 | dennisG | haha :P |
| 13:41.24 | TommyBotten | Gugge: Give it up. this guys cup is already full. |
| 13:42.05 | *** join/#asterisk Skeeter- (skeeter@c216.218.2-65.clta.globetrotter.net) |
| 13:42.21 | *** join/#asterisk mikkel (~mikkel@130.226.36.170) |
| 13:42.28 | dennisG | yeah :) he doesn't need our help |
| 13:42.44 | dennisG | he knows how to fix it |
| 13:42.44 | dennisG | i guess... |
| 13:42.48 | dennisG | ^^ |
| 13:43.05 | TommyBotten | :) |
| 13:43.33 | mchou | right. |
| 13:43.43 | mchou | let's forget "free" |
| 13:43.55 | mchou | what are commercial tools that do this? |
| 13:44.00 | mchou | cause they exist |
| 13:44.04 | mchou | hotshots |
| 13:44.16 | Gugge | im still not sure what you want to do :) |
| 13:44.24 | mchou | If you really know your shit |
| 13:44.47 | dennisG | just shut up mchou, or try to listen and be nice! |
| 13:44.50 | Gugge | i really want to help you, but you have to tell us what you need :) |
| 13:44.55 | TommyBotten | Yeah, you can get them off wallmarts. Along with the rest of the tools that fixes vague and non-defined problems |
| 13:45.03 | mchou | lol |
| 13:45.08 | Katty | frowns. |
| 13:45.34 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 13:45.34 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
| 13:45.37 | Gugge | mchou: there _is_ one online tool that can help you with most problems though |
| 13:45.42 | Katty | hi leifmadsen |
| 13:45.42 | dennisG | you really need some packet sniffing tools, network analyze tools and some local system tools ;) |
| 13:45.45 | Gugge | can you guess what tool im referring to? :) |
| 13:45.47 | mchou | the problem is well defined. on calls betw. voip provider and myself there are latencies exceeding 350ms |
| 13:45.55 | mchou | i.e. echo test |
| 13:46.05 | leifmadsen | hola! |
| 13:46.09 | mchou | how is this not a well defined problem? |
| 13:46.10 | Gugge | mchou, super, and what about icmp ping packets, do they have latency too? |
| 13:46.19 | Gugge | and sip messages |
| 13:46.19 | Katty | leifmadsen: are you also cranky this morning? |
| 13:46.25 | Gugge | or is it only rtp packets |
| 13:46.25 | leifmadsen | nope |
| 13:46.30 | Katty | leifmadsen: thank goodness. |
| 13:46.37 | leifmadsen | just need some coffee :) |
| 13:46.38 | TommyBotten | leifmadsen: In that case, let us not ruin your morning |
| 13:46.57 | Katty | leifmadsen: i went and got some tea this morning, but i've not touched it yet |
| 13:46.57 | Gugge | leifmadsen: may i recommend that you log off before mchou ruins your day then :P |
| 13:47.06 | leifmadsen | I worked on some asterisk documentation, and now I'm just catching up on news and email |
| 13:47.08 | Katty | why don't you guys just simmer down. |
| 13:47.18 | Gugge | ill be nice now :) |
| 13:47.19 | Katty | before i send you to seperate corners. |
| 13:47.26 | leifmadsen | meh |
| 13:47.40 | Katty | leifmadsen: do you reddit |
| 13:47.57 | leifmadsen | I can easily ignore an IRC room if it starts to bother me. I have better ways of helping people out than getting into a bitchfest in here :) |
| 13:48.23 | leifmadsen | Katty: no, I just look at news.google.ca |
| 13:48.29 | Katty | leifmadsen: ahh |
| 13:48.33 | leifmadsen | and watch CBC news, CP24, etc... |
| 13:59.45 | dwarken | leifmadsen dk? |
| 14:01.26 | Katty | wonders if mister limbaugh will now be leaving cape girardeau and heading to costa rica |
| 14:02.44 | *** join/#asterisk ehsjoar (~ehsjoar@c-98-245-155-132.hsd1.co.comcast.net) |
| 14:03.57 | *** join/#asterisk muiro (~muiro@unaffiliated/muiro) |
| 14:04.32 | *** join/#asterisk t_j (~tj@tomjudge.vm.bytemark.co.uk) |
| 14:05.12 | *** join/#asterisk putnopvut (~putnopvut@asterisk/master-of-queues/mmichelson) |
| 14:05.12 | *** mode/#asterisk [+o putnopvut] by ChanServ |
| 14:06.14 | leifmadsen | dwarken: CA |
| 14:06.21 | *** part/#asterisk muiro (~muiro@unaffiliated/muiro) |
| 14:06.39 | dwarken | leifmadsen: ok... :) |
| 14:15.45 | Toommi | can i use sendtext to send a text to an extension ? :> |
| 14:16.08 | *** join/#asterisk arpu (~arpu@chello062178159144.10.14.univie.teleweb.at) |
| 14:19.30 | *** join/#asterisk rajiv_ (~rajiv@gentoo/developer/rajiv) |
| 14:19.49 | *** join/#asterisk werdan7_ (~w7@freenode/staff/wikimedia.werdan7) |
| 14:20.26 | *** join/#asterisk Skeeter- (skeeter@190-141.cgocable.ca) |
| 14:21.01 | Katty | Toommi: yes, if the 'channel' connecting you to the other end supports it. |
| 14:21.06 | Katty | Toommi: that's a bit rare. |
| 14:21.50 | *** join/#asterisk brad_mssw (~brad@shop.monetra.com) |
| 14:22.22 | *** join/#asterisk nickaugust (~anonymous@rrcs-24-73-135-216.se.biz.rr.com) |
| 14:22.26 | Katty | Toommi: i don't think it's going to be what you're really expecting, but feel free to give a shot. |
| 14:25.22 | *** join/#asterisk shinao1 (~shinao1@41.155.12.116) |
| 14:25.27 | shinao1 | hi guys, i wonder, after editing dundi.conf, extensions_custom.conf and {iax_additional|iax_custom}.conf, and creating a dundi trunk, what else do i need to get the servers to talk to each other ok? I have my servers able to lookup extensions and query each other fine, but i cant get them to talk. What am i missing? |
| 14:26.16 | *** join/#asterisk binbash_ (~peter@ip4da53781.direct-adsl.nl) |
| 14:26.40 | *** join/#asterisk TheDavidFactor (~chatzilla@nc-71-0-16-133.dhcp.embarqhsd.net) |
| 14:28.37 | *** join/#asterisk Defraz (~Defraz@c72co-edge-router.fuzecore.com) |
| 14:29.32 | *** join/#asterisk [TK]D-Fender (~chatzilla@216.191.106.163) |
| 14:29.46 | Toommi | thanks katty i'll give it a try ;) |
| 14:32.47 | Katty | does anyone buy tea commercial, by the gallon |
| 14:32.51 | patrb | shinao1: If you can do dundi lookups, they are talking. |
| 14:32.52 | *** join/#asterisk Gugge (~gugge@vlan2.dlxhosting.dk) |
| 14:33.17 | shinao1 | sorry patrb i meant i cant terminate calls between the servers |
| 14:33.44 | patrb | shinao1: Thats what I thought, I use a macro to check if an extension is local, if not it gets passed to the appropriate box |
| 14:33.49 | shinao1 | i get errors everytime i try to call |
| 14:33.59 | patrb | shinao1: pastebin the errors |
| 14:34.00 | [TK]D-Fender | ~areyouadog ? |
| 14:34.01 | infobot | Bark! Bark! |
| 14:34.10 | Katty | infobot: areyouacat |
| 14:34.11 | [TK]D-Fender | infobot: Good boy! |
| 14:34.11 | infobot | [TK]D-Fender: :) |
| 14:34.17 | Katty | :/ |
| 14:34.19 | [TK]D-Fender | ~botsnack |
| 14:34.19 | infobot | [TK]D-Fender: :) |
| 14:34.27 | *** join/#asterisk Maliuta (~scooby@kiev.lusan.id.au) |
| 14:34.32 | Katty | hi Maliuta |
| 14:35.14 | shinao1 | i get an 'all-circuits-are-busy' or 'number-cannot-be-dialled' errors |
| 14:35.41 | *** join/#asterisk vader-- (~me@c-71-225-201-226.hsd1.nj.comcast.net) |
| 14:36.17 | patrb | shinao1: have you looked at this: http://www.cohutta.com/Dundi_How_to.pdf ? |
| 14:36.48 | [TK]D-Fender | shinao1: Got a pastebin of the complete call that failed? |
| 14:36.54 | *** join/#asterisk binbash_ (~peter@ip4da53781.direct-adsl.nl) |
| 14:37.20 | *** join/#asterisk rgsteele (~rgsteele@207.106.239.81) |
| 14:37.46 | shinao1 | i wish i could pastebin :-( sorry |
| 14:38.09 | shinao1 | i did go through that howto |
| 14:38.09 | [TK]D-Fender | shinao1: And why can't you? |
| 14:38.41 | shinao1 | i dont have access to the servers right now, im away from site |
| 14:39.03 | patrb | shinao1: ssh is brilliant |
| 14:39.04 | [TK]D-Fender | shinao1: Then ask again when you're in a position to do something about it. |
| 14:39.34 | shinao1 | ok |
| 14:39.37 | shinao1 | thanks |
| 14:40.31 | patrb | shinao1: I suggest you study that pdf until you're on site though...it's extremely helpful |
| 14:40.53 | shinao1 | the pdf was one of the source materials i used to setup my deployment |
| 14:40.55 | *** part/#asterisk Uazz_Z (~sebastian@85.219.250.161) |
| 14:41.02 | patrb | nice |
| 14:41.04 | *** join/#asterisk binbash_ (~peter@ip4da53781.direct-adsl.nl) |
| 14:41.25 | shinao1 | im just curious.. do i need to setup any routes or trunks beyond the dundi and iax2 trunks? |
| 14:42.03 | *** join/#asterisk CunningPike (~CunningPi@204.239.8.157) |
| 14:42.28 | *** join/#asterisk binbash_ (~peter@ip4da53781.direct-adsl.nl) |
| 14:42.45 | Maliuta | greeting Katty |
| 14:42.54 | Katty | tinkers with the new linksys spa 941 she got in |
| 14:46.12 | Aven | Somebody uses SFA for 1.6.2.6? |
| 14:46.57 | Katty | well. |
| 14:47.00 | Katty | the dtmf is also garbled |
| 14:47.06 | Katty | so this definately isn't a polycom only issue |
| 14:47.40 | *** join/#asterisk davix (~abutbul@81.218.229.226) |
| 14:51.11 | *** join/#asterisk vader-- (~me@c-71-225-201-226.hsd1.nj.comcast.net) |
| 14:52.28 | patrb | shinao1: you'll need to create a new context which holds all of the extensions that can be looked up by the other server |
| 14:52.37 | Katty | now to see what Sangoma says |
| 14:54.24 | davix | how do I enable g722 on my asterisk (elastix +asterisk 1.6 |
| 14:54.40 | davix | Asterisk 1.4.29 |
| 14:54.45 | patrb | shinao1: it sounds like you havent finished configuring your dialplan if its getting busy...but its hard to say until we can see a pastebin of your error |
| 14:55.05 | *** join/#asterisk jpeeler (~jpeeler@asterisk/digium-software-dev/jpeeler) |
| 14:55.27 | shinao1 | ok patrb ill check and ill ask again later. thanks |
| 14:56.41 | rttrey | Katty, Is that a new birdhouse I see on the Critter Cam? |
| 14:57.14 | *** join/#asterisk TommyBotten (tommy@91.205.185.140) |
| 14:58.14 | [TK]D-Fender | davix: * 1.4 only supports G.722 in passthrough mode |
| 14:58.27 | *** join/#asterisk wdbl (daemon@173-15-183-209-BusName-Philadelphia.hfc.comcastbusiness.net) |
| 14:58.33 | [TK]D-Fender | davix: and its a codec youw allow/disallow just like any other |
| 15:00.29 | *** join/#asterisk binbash_ (~peter@ip4da53781.direct-adsl.nl) |
| 15:00.51 | coppice | its wideband. its a codec you allow/disallow like no other |
| 15:01.44 | [TK]D-Fender | coppice: itz speshul |
| 15:02.17 | Katty | rttrey: well. that's a rerun, but yes. |
| 15:02.20 | Katty | rttrey: sort of. |
| 15:02.34 | Katty | rttrey: i had it on the pole for awhile, and moved it in hopes of keeping the squirrels off it. sadly, it's a lost cause. |
| 15:02.53 | Katty | rttrey: i'm going to take it down later this week, when it's empty |
| 15:04.07 | *** join/#asterisk KavanS (~KavanS@static-173-50-141-22.ptldor.fios.verizon.net) |
| 15:04.33 | Katty | rttrey: i did mix corn, peanuts, and sunflower seeds in all the feeders. |
| 15:04.58 | Katty | rttrey: but the sunflower 'shells' were all over the place and i got tired of sweeping the porch every other day to keep it clean and from getting tracked in all over the house |
| 15:05.16 | Katty | rttrey: so i just did corn and peanuts for the squirrels...and decided to put just sunflowers in the feeder on the pole. |
| 15:05.34 | Katty | rttrey: but the squirrels really love the sunflower seeds, so now they climb onto the pole to get at them, and scare the birds off in the process |
| 15:06.03 | Katty | rttrey: thusly, i'm going to 'give up' and put sunflower hearts back in the feeders...no shell (= |
| 15:07.25 | *** join/#asterisk Naikrovek (~jjohnson@unaffiliated/naikrovek) |
| 15:07.42 | Katty | hi Naikrovek |
| 15:07.45 | Naikrovek | got a quote from a polycom reseller in India today. |
| 15:07.47 | Naikrovek | Hi Katty. |
| 15:07.52 | Naikrovek | they charge MORE than MSRP per phone |
| 15:07.54 | Katty | is it through the roof? |
| 15:07.55 | Naikrovek | ??!?!?!!!?!! |
| 15:08.00 | Naikrovek | yes |
| 15:08.02 | Katty | must be supply and demand |
| 15:08.11 | Naikrovek | i doubt it |
| 15:08.16 | Naikrovek | well maybe |
| 15:08.17 | Naikrovek | but i doubt it |
| 15:08.38 | Naikrovek | they charge more than 2x what i can get those phones for in the US |
| 15:08.57 | rttrey | Katty: Ahh ok so that was the one on the pole. Well thanks for clarifying =) |
| 15:14.06 | coppice | Naikrovek: there are pretty high import duties in india, so that explains a part of the difference |
| 15:14.13 | Naikrovek | yeah |
| 15:14.19 | *** join/#asterisk bmoraca_work (~bmoraca@66-242-174-254.ceres.bvn.net) |
| 15:14.33 | Naikrovek | i can buy here and ship there and pay duty and still be $50 per phone less than them at least |
| 15:14.42 | bmoraca_work | goddamn datacenter is going to be the death of me. |
| 15:14.54 | Katty | considers what to mix together next time around for the critters. |
| 15:15.04 | Katty | bmoraca_work: take a very deep breath |
| 15:15.11 | Katty | bmoraca_work: then scream until your lungs hurt |
| 15:15.14 | Katty | bmoraca_work: you will feel better |
| 15:16.05 | vader-- | bmoraca why is that? |
| 15:16.10 | bmoraca_work | keep killing power to our cabinet at night...then when they bring it back up it either blows the power supplies in our equipment or friday it blew the circuit breaker in the cabinet. worst of all is that they never TELL us that they're doing it, so we don't hear about it until our customers complain |
| 15:16.24 | *** join/#asterisk UQlev (~yuriy@212.50.99.8) |
| 15:16.35 | vader-- | why are they killing the power? |
| 15:16.50 | bmoraca_work | good fucking question. and I intend to ask them. pointedly |
| 15:17.00 | Katty | woah woah now |
| 15:17.02 | vader-- | might want to invest in some UPSs |
| 15:17.16 | Katty | i know you're quite upset, but there's no need for that |
| 15:17.43 | bmoraca_work | vader--: i'm paying $300/mo for supposedly clean power on a UPS with a deisel generator...i shouldn't need UPSes |
| 15:18.11 | davix | [TK]D-Fender: thanks, got it working |
| 15:19.14 | Katty | bmoraca_work: :< |
| 15:19.21 | Katty | bmoraca_work: would you like a hug? |
| 15:20.11 | file | hugs Katty randomly |
| 15:20.37 | Katty | hugs file, not so randomly. |
| 15:21.40 | Katty | file: you're an apple person--do you have an ipod nano? |
| 15:21.54 | file | I do not |
| 15:21.58 | Katty | k |
| 15:22.04 | chazzam | wait, you're an apple person? |
| 15:22.07 | file | I have an iPod Touch for day to day/trips and an iPod Shuffle for the gym |
| 15:22.25 | chazzam | ahh |
| 15:22.39 | Katty | file: fyi, i think that nike plus thing will work with ipod touch |
| 15:23.00 | Katty | file: i paid 30US for it |
| 15:23.13 | Katty | file: keeps track of your walking/running/time/calories/distance |
| 15:23.14 | file | Katty: I think it doesn't work with the 1st gen, which is what I have |
| 15:23.20 | Katty | file: kay |
| 15:23.27 | chazzam | poor file |
| 15:23.46 | chazzam | file, I have a nano, I'd consider swapping, for you |
| 15:23.49 | Katty | file: this is my first Apple product. |
| 15:23.51 | chazzam | =p |
| 15:23.54 | file | eep! no :P |
| 15:24.09 | Katty | file: it's...okay. i was somehow expecting it to do more tho |
| 15:24.10 | Qwell | you want to swap an iPod nano for file? |
| 15:24.14 | Qwell | that's a good deal.. |
| 15:24.26 | Katty | hi Qwell |
| 15:24.34 | Katty | file: it needs built in wireless connectivity, and a browser. |
| 15:24.39 | Qwell | waits 36 hours to respond to Katty |
| 15:24.45 | Katty | :< |
| 15:24.46 | [TK]D-Fender | Qwell: res_humantrafficking.so |
| 15:24.53 | Katty | Qwell: how is your toe doing anyway? you all healed up yet |
| 15:25.04 | Qwell | Katty: yeah, it was fine |
| 15:25.08 | Katty | :>>>>> |
| 15:25.18 | Katty | excellent. i am happy to hear you are not perminently damaged. |
| 15:25.18 | Qwell | wasn't broken - just hurt like hell |
| 15:25.20 | file | Qwell: Mr. Oh it's broken! |
| 15:25.25 | file | Qwell: :P |
| 15:25.26 | Qwell | file: It felt broken! |
| 15:25.40 | Qwell | besides, I've moved on to a different thing to think I have wrong with me. |
| 15:25.40 | Katty | Qwell: did they do xrays and whatnot |
| 15:25.51 | Qwell | Katty: yes. they even gave me drugs. |
| 15:26.16 | Katty | Qwell: i think drugs is a common procedure when in pain tho, yes? |
| 15:26.17 | *** join/#asterisk joako (~joako@opensuse/member/joak0) |
| 15:26.26 | Qwell | Katty: in AL it is, apparently |
| 15:26.34 | Katty | Qwell: here too. |
| 15:27.14 | *** join/#asterisk Deeewayne (~dwayne@75.76.254.162) |
| 15:27.14 | *** mode/#asterisk [+o Deeewayne] by ChanServ |
| 15:27.17 | Katty | Qwell: here they also like to stick you on SSRIs for so much as a scowl. |
| 15:27.18 | Katty | hi Deeewayne |
| 15:27.33 | Deeewayne | Katty, hey! |
| 15:28.11 | Katty | file: i don't like how they put a special connector on this thing |
| 15:28.15 | Katty | file: should've been usb |
| 15:28.47 | Katty | file: or at least an additional miniusb port |
| 15:29.38 | Katty | file: i also don't like that it can only sync with one machine |
| 15:29.41 | file | Katty: using a standard connector? pfft |
| 15:29.43 | file | crazy talk |
| 15:29.55 | Katty | yes, i know.... |
| 15:30.04 | Katty | heaven forbid anything be standardized :< |
| 15:31.48 | *** join/#asterisk kaldemar (~kaldemar@unaffiliated/kaldemar) |
| 15:32.49 | Katty | oh here we go. if i put it in manual mode i can sync with multiple machines |
| 15:35.40 | *** join/#asterisk thecardsmith (~doug@pool-71-161-218-3.burl.east.myfairpoint.net) |
| 15:36.24 | Katty | file: and why do they have to be 4 letters? |
| 15:36.36 | Katty | file: i don't understand the purpose of renaming all your audio files to 4 letters |
| 15:36.52 | file | Katty: to keep them sekret! |
| 15:37.14 | Katty | file: that's not very secrety |
| 15:37.20 | Katty | file: it's just odd. |
| 15:37.30 | Katty | file: oh well. |
| 15:37.39 | Katty | file: not like it's going to be the end of the world |
| 15:37.45 | Katty | file: YET |
| 15:38.40 | thecardsmith | i'm looking to set up a cost-effective PSTN-to-Asterisk proof-of-concept, in the day... I'd used freeworlddialup.com and ipkall.org... i think that's kind of old school, could anyone offer me a suggestion how I could have a call to a POTS number translate to a sip call to my asterisk box? |
| 15:39.23 | Katty | thecardsmith: well the way i would do it is port the number over to a sip providor |
| 15:39.38 | Katty | thecardsmith: and then the sip providor would then assign them as DID numbers for my account |
| 15:39.56 | [TK]D-Fender | thecardsmith: Your dialplan does whatever you tell it to |
| 15:40.26 | [TK]D-Fender | thecardsmith: Make an exten to matcht he number or pattern you want to treat differently than otehr numbers/patterns and do whatever you want. |
| 15:41.31 | Gugge | thecardsmith, either get some pstn-hardware in your asterisk box, or port the number to a sip providor. |
| 15:44.44 | thecardsmith | Katty: good call, maybe i'll see if i can get a local telco to do this for me. Gugge -- hopefully in the future I'll have a DS3 into my cabinet, for cheapness, might spring money for a SIP provider while I prove out an idea! |
| 15:44.46 | thecardsmith | thank you guys :) |
| 15:45.49 | *** join/#asterisk sjobeck (~Adium@67.136.135.134) |
| 15:45.56 | Katty | thecardsmith: just fyi, asterisk can handle pots lines |
| 15:46.15 | Katty | thecardsmith: it's not the /ideal/ way of doing things....i mean analog is kinda... |
| 15:46.17 | thecardsmith | right on -- like if I have a PRI into a digium card? |
| 15:46.31 | thecardsmith | yeeeeah, kinda older school :) |
| 15:46.36 | Katty | well it's not a pri card. it's made specifically for pots lines |
| 15:46.43 | thecardsmith | no kidding -- RJ11?? |
| 15:46.52 | thecardsmith | copper, daymnnn |
| 15:46.58 | Katty | and i've actually had better luck with Sangoma in the echo canceling department |
| 15:47.11 | Katty | but what you might do is give one of the sales folk at TelephonyDepot.com a call |
| 15:47.14 | thecardsmith | writes that down |
| 15:47.38 | Katty | they will direct you to the appropriate card, and configuration, to support the medium you need to support |
| 15:48.15 | Katty | and by configuration i mean what 'daughter cards' go onto the main board. |
| 15:48.22 | Katty | they're obviously not going to tell you how to configure your server. |
| 15:48.31 | Katty | digium and sangoma are the two big players tho |
| 15:48.44 | thecardsmith | right on... they'll have the know-how on what hardware i'll need, clutch! |
| 15:49.27 | *** join/#asterisk Faithful (~Faithful@202.6.145.116) |
| 15:53.06 | *** join/#asterisk DelphiWorld (~Miranda@196.20.124.153) |
| 15:53.23 | DelphiWorld | hi all |
| 15:53.29 | devoid | hi |
| 15:53.29 | Katty | hi |
| 15:53.37 | DelphiWorld | anyone have a gizmo5 account? a voipuser account or callcentric account? |
| 15:53.48 | DelphiWorld | hi Katty;) |
| 15:53.59 | DelphiWorld | devoid: ;) |
| 15:54.02 | Katty | i have a gizmo account |
| 15:54.06 | Katty | but gave up on it long long long ago |
| 15:54.31 | DelphiWorld | Katty: registered to asterisk or to a softphone? a hardware ip phone or what? |
| 15:54.48 | Katty | DelphiWorld: i attempted to put it on my blackberry |
| 15:55.07 | DelphiWorld | Katty: you still have tyour user/pass? |
| 15:55.15 | Katty | DelphiWorld: hrmm |
| 15:55.21 | Katty | DelphiWorld: probably not. this was several years ago. |
| 15:55.26 | DelphiWorld | don't want to request auth info from Katty |
| 15:55.52 | DelphiWorld | Katty: is just to test something with me;) |
| 15:57.20 | DelphiWorld | Katty: if you got your user/pass ping me. |
| 15:57.45 | DelphiWorld | Katty: register asterisk to it and ping me or your phone or ... |
| 15:58.37 | Katty | DelphiWorld: you not wanting to request authorization info from me doesn't change the fact that it's been several years ago and i don't have it anymore. |
| 15:59.54 | DelphiWorld | Katty: ok np |
| 16:01.12 | DelphiWorld | if anyone please call this INUM number for testing it with me, is my own inum interconnection with VOXBONE |
| 16:01.14 | DelphiWorld | 883510001289101 |
| 16:01.35 | leifmadsen | yikes |
| 16:01.41 | leifmadsen | that's quite the number :) |
| 16:03.20 | DelphiWorld | leifmadsen: hahaha |
| 16:04.13 | Katty | file: i don't like you can't sync from ipod -> itunes, just itunes -> ipod. not that it's a big deal and i can copy the mp3s from the ipod directly to the itunes library... |
| 16:04.21 | Katty | file: but still. |
| 16:06.56 | *** join/#asterisk werdan7 (~w7@freenode/staff/wikimedia.werdan7) |
| 16:09.35 | *** join/#asterisk ManxPower-work (~manxpower@216.186.151.147) |
| 16:09.40 | ManxPower-work | Has anyone seen this before: |
| 16:09.41 | ManxPower-work | [Mar 22 12:09:02] WARNING[31610]: chan_sip.c:3752 sip_write: Asked to transmit frame type 4, while native formats is 0x100 (g729)(256) read/write = 0x100 (g729)(256)/0x100 (g729)(256) |
| 16:10.01 | ManxPower-work | we have g729 licenses, but it should not be trying to transcode anyway |
| 16:10.22 | seanbright | teliax is jacked today |
| 16:10.56 | Katty | hi seanbright |
| 16:11.32 | pigpen | Is anyone using a good, reliable, free webdav client on windows xp? I figure that maybe one or two users here would be using windows. (poor bastards) |
| 16:12.01 | seanbright | IE |
| 16:12.10 | pigpen | yeah, blows half the time. |
| 16:12.11 | Katty | hehehehhe |
| 16:12.17 | Qwell | pigpen: how is that related to Asterisk in any way? |
| 16:12.18 | seanbright | never had a problem with it |
| 16:12.38 | Katty | Qwell: about as much as my asking for recipes does. |
| 16:12.39 | pigpen | I have gotten it to work once...but never again on several systems. |
| 16:12.44 | Katty | Qwell: probably, more relevant... |
| 16:12.46 | Katty | Qwell: somehow |
| 16:12.56 | Katty | Qwell: do you have any new recipes for me? |
| 16:13.27 | pigpen | Qwell, well, it isn't. Just I know there are many, very talented and well versed people in here. |
| 16:14.24 | *** join/#asterisk sjobeck (~Adium@72.11.84.62) |
| 16:14.43 | *** join/#asterisk paulc (~paulc@unaffiliated/paulc) |
| 16:15.13 | shinao1 | [TK]D-Fender: patrb: ? i've been able to do some sort of remoteing and i have some output of a call: http://pastebin.org/120397 |
| 16:15.39 | *** part/#asterisk ManxPower-work (~manxpower@216.186.151.147) |
| 16:17.03 | *** join/#asterisk lowlevel (~Stuart@lowlevel.ca) |
| 16:17.44 | ChannelZ | where did the list of channel variables go in the docs? |
| 16:18.59 | shinao1 | hi guys, i wonder, after editing dundi.conf, extensions_custom.conf and {iax_additional|iax_custom}.conf, and creating a dundi trunk, what else do i need to get the servers to talk to each other ok? I have my servers able to lookup extensions and query each other fine, but i cant get them to talk. What am i missing? This is some anatomy of an attempted call http://pastebin.org/120397, and my setup: http://pastebin.org/120400 |
| 16:19.28 | Qwell | shinao1: #freepbx |
| 16:20.24 | kaldemar | ChannelZ: doc/tex/channelvariables.tex |
| 16:20.34 | shinao1 | yes Qwell ive been there |
| 16:20.51 | ChannelZ | tex? really? .... |
| 16:21.04 | *** join/#asterisk Slugs_ (Slugs_@c-76-97-205-31.hsd1.ga.comcast.net) |
| 16:21.05 | Qwell | ChannelZ: or use the PDF in every release |
| 16:21.16 | Slugs_ | hi |
| 16:21.24 | *** join/#asterisk beers218 (~45c6b055@gateway/web/freenode/x-gcymbemcnhridkpr) |
| 16:21.54 | beers218 | i know the question probably gets asked a lot, but how well does fax to email over a SIP trunk perform? |
| 16:22.59 | kaldemar | shinao1: looks like you need to edit your dialplan some more. your output has nothing to do with your dundi setup. |
| 16:23.01 | ChannelZ | Qwell: ahh I see, thanks |
| 16:23.26 | shinao1 | could you help me with some pointers, kaldemar ? |
| 16:24.31 | Qwell | *#freepbx |
| 16:24.31 | kaldemar | shinao1: based on what you showed, no. fix your dialplan, that's it. |
| 16:24.37 | [TK]D-Fender | shinao1: This is FreePBX junk and is not supoprted here.... |
| 16:24.40 | [TK]D-Fender | shinao1: Move along... |
| 16:24.47 | Qwell | (too subtle?) |
| 16:24.55 | Qwell | file would get it, I think. |
| 16:25.21 | shinao1 | wow. thanks for the shove. |
| 16:25.50 | Qwell | shinao1: we *can't* help you. they add way too much stuff to the config that makes it extremely difficult. |
| 16:25.55 | VoIP-Penguin | beers218: It often works, but don't expect reliability. |
| 16:27.46 | beers218 | im about to give up on it... especially cause my provider doesnt have T.38 compatibility |
| 16:27.51 | shinao1 | ok |
| 16:27.55 | shinao1 | thanks anyway |
| 16:27.57 | Qwell | beers218: fax over voice over IP is silly, at best |
| 16:28.18 | VoIP-Penguin | beers218: Mine doesn't have t.38 either, and I still receive faxes just fine. |
| 16:29.02 | beers218 | right.. ive tried a ton of different methods, but i cant get any of the dialplan apps to work with an incoming fax |
| 16:29.25 | VoIP-Penguin | I use the free Fax for Asterisk. |
| 16:29.28 | beers218 | same with hylafax. its like the fax tones dont come through |
| 16:29.43 | Qwell | beers218: try to find a decent provider that does T.38, or use a dedicated analog line |
| 16:30.07 | VoIP-Penguin | I did try iaxmodem and hylafax, but something was seriously wrong. |
| 16:30.09 | beers218 | i got one analog line for faxing... but the boss wants fax to email set up |
| 16:30.17 | VoIP-Penguin | I got FFA, and no more problems. |
| 16:30.21 | pigpen | I have been using Hylafax for years (3+), and it has worked great. However, I do have several PRI's feeding it. |
| 16:30.53 | pigpen | After wasting days upon days trying to get Fax to work over VOIP, I vowed never to do it again.... |
| 16:31.00 | beers218 | VoIP-Penguin: whos your provider? |
| 16:31.16 | *** join/#asterisk mikkel (~mikkel@84-238-113-66.u.parknet.dk) |
| 16:31.16 | VoIP-Penguin | beers218: I'm using sipgate for my fax over SIP. |
| 16:32.01 | VoIP-Penguin | beers218: If you have an analog phone line for faxing, why are you asking about SIP service providers? |
| 16:32.09 | vader-- | hmm any of you guys good with dhcpd? |
| 16:32.18 | VoIP-Penguin | vader--: Just ask your question. |
| 16:32.24 | vader-- | im trying to set it up and it won't give any leases |
| 16:32.33 | vader-- | im getting no free leases |
| 16:33.00 | VoIP-Penguin | vader--: Paste you conf into the pastebin. |
| 16:33.24 | beers218 | VoIP-Penguin: thats our master fax machine. we need to have specific DID's go to different email addresses for fax-to-email |
| 16:33.31 | vader-- | http://pastebin.com/3115qfGm |
| 16:34.34 | *** join/#asterisk atis_work (~atis_work@193.238.212.171) |
| 16:34.37 | VoIP-Penguin | vader--: Is that supposed to be for a LAN? |
| 16:34.50 | vader-- | ya it's just a test lan i have setup |
| 16:35.18 | VoIP-Penguin | vader--: So you realize that you aren't using RFC 1918 addresses, I guess. |
| 16:35.23 | vader-- | yes |
| 16:35.38 | VoIP-Penguin | Just making sure. |
| 16:35.44 | vader-- | i knows ;-) |
| 16:38.15 | *** join/#asterisk smooth_penguin (~smoove@59.95.57.211) |
| 16:38.37 | Katty | SMOOTH PENGUIN |
| 16:38.39 | vader-- | see anything wrong with the conf? |
| 16:38.41 | *** join/#asterisk Micc_ (~quassel@c-98-225-57-96.hsd1.wa.comcast.net) |
| 16:38.52 | Katty | so lunch was interesting. tortillini + creamed corn |
| 16:39.19 | smooth_penguin | hey Katty :> |
| 16:40.25 | carrar | PICS!! |
| 16:40.29 | carrar | Or it never happen! |
| 16:41.10 | smooth_penguin | I doubt she'd have any pics of it :< |
| 16:41.23 | DelphiWorld | any tester please 883510001289101 |
| 16:41.26 | *** part/#asterisk DelphiWorld (~Miranda@196.20.124.153) |
| 16:41.56 | VoIP-Penguin | vader--: http://pastebin.com/jsuEnva2 Try it like this to see if you get any leases. |
| 16:44.01 | carrar | Excellent use of a /16 |
| 16:44.11 | Katty | carrar: no. no photos. |
| 16:44.17 | Katty | carrar: also, it is now in my tummy. |
| 16:44.17 | VoIP-Penguin | for a few phones? |
| 16:44.30 | carrar | PICS!! |
| 16:44.32 | Katty | carrar: photos would not be very pleasant |
| 16:44.32 | carrar | heh |
| 16:44.54 | carrar | VoIP, yes :) |
| 16:45.22 | Katty | smooth_penguin: let's hug |
| 16:45.37 | smooth_penguin | aw |
| 16:45.42 | smooth_penguin | huggles Katty |
| 16:45.46 | Katty | hugs smooth_penguin |
| 16:46.05 | smooth_penguin | :> |
| 16:46.05 | Katty | smooth_penguin: you have any fish recipes to share with me |
| 16:46.19 | *** join/#asterisk DennisG (~DennisG@84.30.136.208) |
| 16:46.20 | coppice | Katty: just eat it raw |
| 16:46.21 | Katty | smooth_penguin: no curry. ryan doesn't like curry |
| 16:46.31 | Katty | coppice: eeek, keep the sushimi over there |
| 16:46.36 | Deeewayne | agrees w/ coppice |
| 16:46.42 | Katty | yucky |
| 16:47.01 | smooth_penguin | hrm, well fried then - theres a few but I can remember them myself ill link you to em, hold on |
| 16:47.12 | Qwell | mmm, sushi |
| 16:47.27 | ChannelZ | caca |
| 16:47.33 | Katty | smooth_penguin: as long as it's not deep fried. |
| 16:47.41 | smooth_penguin | yep |
| 16:47.56 | vader-- | pengium that worked |
| 16:48.24 | VoIP-Penguin | vader--: Okay, now go back and uncomment your classes and add them back into the subnet definition. |
| 16:48.41 | Katty | VoIP-Penguin: so why did you change your /nick? |
| 16:48.44 | vader-- | without the pool? |
| 16:49.24 | Katty | Qwell: do you know how to make sushi? |
| 16:49.33 | Qwell | I know how to eat sushi |
| 16:49.35 | Katty | k |
| 16:49.36 | smooth_penguin | Katty, we make these quite often - http://www.konkanyatra.com/konkanicusine.html |
| 16:49.39 | [TK]D-Fender | Katty: I do |
| 16:49.39 | Katty | looks |
| 16:49.43 | smooth_penguin | leave out the first two |
| 16:49.51 | Qwell | I also know how to order sushi. Which is kinda like making it. |
| 16:49.54 | VoIP-Penguin | vader--: Don't use "pool" if you can make it work without it. |
| 16:50.04 | [TK]D-Fender | Katty: It's just about the only food I acn be bothered to prepare |
| 16:50.07 | smooth_penguin | Katty, you would have a tough time finding the spices though :s |
| 16:50.07 | VoIP-Penguin | katty: I thought it would be a fun thing to do. |
| 16:50.09 | coppice | I have a rice cooker |
| 16:50.12 | *** join/#asterisk Kobaz (~kobaz@its.kobaz.net) |
| 16:50.30 | Katty | smooth_penguin: goodness. which one? there's like a billion on there. |
| 16:50.38 | [TK]D-Fender | coppice: Is she cute? |
| 16:50.39 | Katty | smooth_penguin: finding the spices won't be a problem. |
| 16:50.44 | Katty | OHSNAP |
| 16:50.47 | vader-- | whats the purpose of pool? |
| 16:51.01 | Katty | to win |
| 16:51.05 | carrar | vader, why are you splitting old and new phones off to different tftp servers? |
| 16:51.07 | Katty | and to practice your geometry |
| 16:51.27 | Katty | VoIP-Penguin: how's it workin out for ya in the fun department? |
| 16:51.28 | smooth_penguin | Katty, Malvani Fish Fry, Bangda Fry (Fried Mackerels), |
| 16:51.45 | VoIP-Penguin | katty: So far... meh. |
| 16:51.46 | smooth_penguin | Katty, my fav - Sukat Bombil Chatni (Dried Bombay Duck Fry) |
| 16:52.02 | *** join/#asterisk citywok (~chatzilla@67-134-194-33.dia.static.qwest.net) |
| 16:52.06 | [TK]D-Fender | Katty: Remember... lean down nice & low, take smooth steady strokes with the shaft, and the key isn't the speed of your shot, but rather how you position your balls ;) |
| 16:52.06 | Katty | smooth_penguin: yeah i can find all those spices |
| 16:52.19 | Katty | [TK]D-Fender: i uhh |
| 16:52.20 | Kobaz | huh |
| 16:52.21 | Katty | [TK]D-Fender: yeah. |
| 16:52.21 | Kobaz | what |
| 16:52.22 | *** join/#asterisk grEvenX (~even@cC0FD00C3.dhcp.bluecom.no) |
| 16:52.23 | [TK]D-Fender | :D |
| 16:52.27 | [TK]D-Fender | pwnd |
| 16:52.28 | citywok | according to top * says it's using 120% cpu, but it's a 4 core server and it says it has 90% CPU free. any way to see what it thinks it is doing? |
| 16:52.28 | Kobaz | whose balls? |
| 16:52.28 | Katty | Kobaz: he's talking about pool |
| 16:52.31 | Kobaz | oh |
| 16:52.32 | Katty | Kobaz: billiards |
| 16:52.53 | [TK]D-Fender | citywok: My server's also give 120% |
| 16:52.59 | Kobaz | speaking of smooth steady strokes |
| 16:53.01 | [TK]D-Fender | 210* |
| 16:53.09 | Kobaz | i went kayaking this weekend, the rivers are up like 4-5 feet |
| 16:53.10 | smooth_penguin | Katty, if you google for East Indian fish recipes - youll find the best |
| 16:53.12 | Katty | smooth_penguin: this looks perfect. thanks (= |
| 16:53.19 | citywok | hmm, this is new to my server so i'm wondering it it is related to the crashes i was having last week |
| 16:53.31 | citywok | (which may have been related to a bad version of the softphone from Zoiper) |
| 16:53.51 | Katty | a softphone crashed asterisk? |
| 16:53.56 | Katty | wow. |
| 16:54.03 | Katty | first time i've heard that. crazy stuff... |
| 16:54.08 | citywok | i installed the newest version of zoiper last tuesday, had asterisk hard lock my entire server 5 times last week |
| 16:54.17 | citywok | i unisntalled the newest version of zoiper from everywhere, and havne't had a crash since |
| 16:54.30 | Kobaz | your zoiper crashes asterisk? |
| 16:54.49 | Katty | weirddddd |
| 16:54.50 | citywok | i'm not 100% that was the problem, but I had restored everything * related to a week before until i reverted the zoiper build |
| 16:55.13 | citywok | i talked to the developers and they made 2 changes they say are reltaed to sip handling and may be the culprit |
| 16:55.38 | citywok | "We haven't changed the SIP handler a lot, only 2 changes that might influence the other end have been done. SDP version increment (changes the packets for sure) and RTP port collision handling (this might change the source port but only if it was already in use, i doubt it could cause the deadlock)." |
| 16:55.55 | Qwell | citywok: What version of Asterisk? |
| 16:56.01 | citywok | 1.6.1.12 & .18 |
| 16:56.42 | citywok | i am verbosel ogging with verbose 10 and sip debug on right now, so if it happens again i may be able to see what happened right before the crash |
| 16:56.51 | citywok | of course it's cranked out a 1gb file in the last 4 hours |
| 16:57.18 | citywok | (i also compiled with dont optimize, and started with -g to try and get a backtrace if possible) -- but when it blwos up, the entire server hardlocks |
| 16:57.23 | *** join/#asterisk grEvenX (~even@cC0FD00C3.dhcp.bluecom.no) |
| 16:57.38 | citywok | well, softlock i suppose not hardlock |
| 17:01.10 | Kobaz | yay |
| 17:01.21 | Kobaz | we're all going to get fined for not having health insurance |
| 17:01.31 | carrar | isn't that great |
| 17:01.39 | Kobaz | i wonder if the fine is cheaper than paying for insurance |
| 17:01.43 | Kobaz | might as well just pay the fine |
| 17:02.08 | *** join/#asterisk nickaugust (~anonymous@rrcs-24-73-135-216.se.biz.rr.com) |
| 17:02.12 | ChannelZ | it is for employers |
| 17:02.38 | Katty | well. |
| 17:02.41 | pigpen | yeah, for companies that have more than 50 employees right? |
| 17:02.45 | Katty | they also get tax breaks too tho |
| 17:02.48 | carrar | You get to pay for other peoples abortions too!! |
| 17:02.54 | carrar | how exciting is that |
| 17:03.01 | Katty | that doesn't bother me |
| 17:03.06 | citywok | carrar: i'd rather pay for the abortion then the welfare. it's cheaper |
| 17:03.15 | Katty | i'm okay for paying on 1 abortion vs 90 years of healthcare |
| 17:03.29 | Katty | citywok: hey now. |
| 17:03.37 | Katty | citywok: let's not make any assumptions about people getting abortions |
| 17:03.43 | Katty | citywok: that's not very polite |
| 17:04.05 | Katty | carrar: that's kind of what irritates me about the republicans |
| 17:04.06 | citywok | lol |
| 17:04.23 | Katty | carrar: they're all about the first nine months, but couldn't care less about your next 90 years of health services |
| 17:04.26 | ChannelZ | The Census just sent out millions of letters telling people they were going to send them the census. Yet people believe Nancy and Barack when they said 'this bill will pay for its self by cutting waste, fraud, and abuse!' |
| 17:04.52 | Katty | carrar: just my opinion tho. |
| 17:04.56 | citywok | ChannelZ: i got a kick out of that myself, what a waste |
| 17:05.11 | Katty | i found the census very racist. |
| 17:05.18 | Katty | and very sexist. |
| 17:05.26 | *** join/#asterisk slashtom (~tom@k-rad.co.uk) |
| 17:05.30 | ChannelZ | I haven't even opened mine yet |
| 17:05.41 | Katty | it's very short. |
| 17:05.43 | ChannelZ | but thank god I got the letter letting me know it was coming or I might have thrown it away! |
| 17:05.44 | citywok | i just got home, haven't checked the mail in 5 days |
| 17:06.22 | Katty | i don't understand why they need to know everyones 'breed' |
| 17:06.50 | Katty | does it really make all that much difference? |
| 17:07.12 | citywok | Qwell: any suggestions? |
| 17:07.25 | coppice | breed? that sounds archaic |
| 17:07.34 | Katty | coppice: well that's what it is, isn't it |
| 17:07.41 | ChannelZ | Lets do it like they do on the Discovery Channel |
| 17:07.53 | [TK]D-Fender | ChannelZ: In HD? |
| 17:07.57 | Katty | coppice: we have asians, african americans, hispanic.. |
| 17:08.01 | slashtom | i don't suppose anyone knows where i can get an RPM for centos5.2 of Asterisk-1.4.30? |
| 17:08.10 | ChannelZ | Yeah and blurry boxes over the naughty bits |
| 17:08.23 | Katty | coppice: it's like they're trying to organize cattle |
| 17:08.29 | VoIP-Penguin | slashtom: Just build your own using checkinstall. |
| 17:08.34 | VoIP-Penguin | slashtom: It's pretty easy. |
| 17:08.47 | coppice | Katty: do they have a "none of the above" box? |
| 17:08.48 | slashtom | checkinstall? |
| 17:08.53 | Katty | coppice: not that i saw. |
| 17:08.58 | *** join/#asterisk cusco (~trilili@213.63.137.210) |
| 17:09.01 | cusco | ghi |
| 17:09.04 | cusco | hi |
| 17:09.06 | coppice | Katty: I've bred with an Asian |
| 17:09.22 | Katty | coppice: i hope it was enjoyable. |
| 17:09.35 | Katty | cusco: hello |
| 17:09.39 | cusco | hi Katty |
| 17:09.45 | VoIP-Penguin | slashtom: When you build something from source, specify the correct prefix and then use checkinstall instead of make install. It makes an rpm for you. |
| 17:10.06 | Katty | coppice: i don't know why they have a race box. |
| 17:10.11 | Katty | coppice: i should have just written in Human |
| 17:10.30 | cusco | two asterisks in a iax trunk, both using 1.6.2.6... does one assume the other's UNIQUEID ?? |
| 17:10.46 | slashtom | ah, thanks VoIP-Penguin |
| 17:10.56 | VoIP-Penguin | slashtom: Like with asterisk, I would use ./configure --prefix=/usr --sysconfdir=/etc ; make ; checkinstall |
| 17:11.26 | coppice | To quote a comedian "I have mixed race parents. My father likes the 100m, and my mother is Pakistani" |
| 17:11.37 | Katty | lol |
| 17:12.11 | VoIP-Penguin | slashtom: You might want to make menuselect before actually compiling, though. I'm sure you can figure it out. |
| 17:12.26 | slashtom | yep, i've been working through that stage |
| 17:12.44 | slashtom | what i'm needing is a compiled version i can roll out to the servers |
| 17:13.04 | slashtom | so if checkinstall does what it says, i'm sorted - thanks :) |
| 17:13.07 | VoIP-Penguin | slashtom: Be sure to specify the correct prefix and sysconfdir before making the rpm, otherwise you'll end up with an rpm that puts files into the wrong place. |
| 17:13.16 | cusco | rpm... arhgh |
| 17:13.36 | slashtom | i know... |
| 17:13.48 | VoIP-Penguin | cusco: Not a SysAdmin, I take it? |
| 17:13.57 | cusco | I am |
| 17:14.03 | coppice | Katty: I don't know what they can read into any of the data they gather. so many people seem to fill this stuff in for a laugh, or because they fear giving the right answer |
| 17:14.24 | VoIP-Penguin | cusco: Then you should know the importance of rpms when using rpm-based distros. |
| 17:14.46 | cusco | VoIP-Penguin: I preffer not to use rpm-based distros |
| 17:14.50 | cusco | :-) |
| 17:14.54 | Katty | coppice: dunno |
| 17:15.26 | slashtom | cusco: i'm likewise, but i'm paid to do this! |
| 17:15.33 | cusco | and then again checkinstall doesn't seem the propper way to create a package |
| 17:15.44 | VoIP-Penguin | Why not? |
| 17:15.46 | cusco | should read the package maintainer guide lines |
| 17:15.54 | cusco | check how they create rpm's etc |
| 17:16.05 | VoIP-Penguin | It's a lot quicker than writing your own spec files all the time. |
| 17:16.12 | cusco | but im just talking rubish so don't mind me... sorry |
| 17:16.38 | *** join/#asterisk Skeeter- (skeeter@190-141.cgocable.ca) |
| 17:17.02 | Katty | hi Skeeter- |
| 17:17.28 | VoIP-Penguin | I trust that the author of checkinstall knows how to create an rpm, then I use checkinstall to install my files; this should create a suitable rpm containing my files. |
| 17:17.44 | Qwell | slashtom: packages.asterisk.org |
| 17:17.50 | slashtom | using a tool does seem to make life a lot easier |
| 17:17.51 | cusco | there :-) |
| 17:18.37 | Katty | wonders why apple even bothers trying to keep you from copying songs from ipod to itunes, when the audio files are sitting right there in mass storage. |
| 17:18.43 | slashtom | Qwell: cheers! |
| 17:18.57 | Skeeter- | Katty good afternoon |
| 17:19.14 | Qwell | slashtom: install the asterisknow-version package, and get yum goodness |
| 17:19.18 | ChannelZ | Katty: The irony is it actually makes more sense now that there's no DRM |
| 17:19.26 | Katty | ChannelZ: DRM? |
| 17:19.28 | ChannelZ | but iTunes in general is a POS |
| 17:19.34 | ChannelZ | Digital Rights Management |
| 17:19.58 | Katty | itunes makes it easy for folks who don't really know how to manage their stuff i guess |
| 17:20.16 | vader-- | carrar im splitting them to two different tftp servers so that my new cisco phones that come in can be reimaged to sip |
| 17:20.29 | vader-- | one tftp server has the upgrade code and the other one has the config files |
| 17:20.33 | Katty | ChannelZ: it's very easy to buy a phone and get it on the ipod |
| 17:20.38 | Katty | ChannelZ: err buy a song i mean |
| 17:21.16 | vader-- | once the phone is converted from the cisco firmware to the sip firmware it then changes over to the other tftp server |
| 17:21.26 | Katty | ChannelZ: but it's very inconvienent otherwise |
| 17:21.39 | Katty | ChannelZ: no doubt on purpose. |
| 17:21.40 | *** join/#asterisk jameswf (~james@unaffiliated/jameswf-home) |
| 17:21.43 | Katty | ChannelZ: like this insane connector. |
| 17:21.50 | Katty | ChannelZ: why it's not a mini usb, i'll never understand |
| 17:22.59 | coppice | Katty: it predates the mini USB, and it carries things like audio and remote control signals to various peripherals |
| 17:23.06 | *** join/#asterisk Neo31 (~Neo31@unaffiliated/neo31) |
| 17:24.09 | Katty | ahh, i see. |
| 17:24.33 | Katty | dear apple, please add an additional mini usb port to your device for convienence purposes |
| 17:24.42 | Katty | thx, Katty |
| 17:25.25 | coppice | commendably, it has been common to all the ipod, itouch and iphone products for years, and they have always had a normal 3.5mm jack for headphones |
| 17:26.33 | Katty | yeah but all the walkmans back in the day... |
| 17:26.35 | Katty | and cd players |
| 17:26.41 | Katty | and now mp3 flash drivers players... |
| 17:26.47 | Katty | they all use 3.5mm too right? |
| 17:27.21 | coppice | a lot of smartphones and some flash players didn't until recently |
| 17:27.34 | Katty | ahhh. guess i just got lucky with mine then |
| 17:27.57 | coppice | even the first android phone, which is pretty recent, has a stupid headphone connector |
| 17:28.25 | Katty | weird. |
| 17:28.51 | Qwell | coppice: that's just HTC though |
| 17:29.33 | coppice | HTC, Nokia, Sharp, Sony Ericsson, Samsung, LG have all made smart phones with funky headphone connectors |
| 17:30.16 | Katty | see there's no need for that |
| 17:30.37 | cusco | so... |
| 17:30.44 | cusco | two asterisks in a iax trunk, both using 1.6.2.6... does one assume the other's UNIQUEID ?? |
| 17:31.27 | Katty | cusco: dunno. |
| 17:31.59 | ChannelZ | Katty: Steve's way or the highway |
| 17:32.34 | Katty | ChannelZ: statement does not parse. |
| 17:32.35 | coppice | ChannelZ: that's what I tell my children |
| 17:32.36 | Katty | ChannelZ: indexes missing |
| 17:33.07 | *** join/#asterisk ruchir (~ruchir@67.41.130.152) |
| 17:33.17 | ChannelZ | Steve Jobs |
| 17:33.38 | Katty | oh |
| 17:33.42 | Katty | statement now parses. |
| 17:33.46 | Katty | i agree. |
| 17:34.11 | *** join/#asterisk Slugs_ (Slugs_@c-76-97-205-31.hsd1.ga.comcast.net) |
| 17:34.21 | Katty | ChannelZ: he has done very well to make products easy for the Typical Person to use |
| 17:34.26 | *** join/#asterisk Slugs_ (Slugs_@c-76-97-205-31.hsd1.ga.comcast.net) |
| 17:34.54 | ruchir | http://pastebin.com/tZBV26rB |
| 17:34.55 | Slugs_ | anybod watch the vicous elbow from jones to vera? |
| 17:35.02 | ruchir | i'm getting these errors time to time in odbc vm |
| 17:35.13 | Katty | hi Slugs_ |
| 17:35.22 | *** join/#asterisk yahh (~root@122.169.87.86) |
| 17:35.26 | Slugs_ | hey Katty ;0 |
| 17:35.57 | ruchir | http://pastebin.com/tZBV26rB |
| 17:36.07 | ruchir | why it gets disconnected every time |
| 17:36.12 | coppice | Katty: no. he has just made piles of cash. the very smart people he brought over from NeXT did what you said |
| 17:36.15 | ruchir | i have to keep restarting mysql and asteirsk |
| 17:36.21 | yahh | i have AEX410P on my system |
| 17:36.31 | yahh | i dont know how to configure it with dahdi |
| 17:36.39 | yahh | i run dahdi_genconf |
| 17:36.43 | Katty | coppice: i don't know a lot about apple products.... |
| 17:36.47 | yahh | but it is not configuring that |
| 17:37.03 | Katty | coppice: this ipod is my first experience |
| 17:38.07 | Katty | coppice: this little device seems to be designed very well to work with itunes, and buying music and whatnot |
| 17:38.23 | tzafrir | yahh, what's the output of: dahdi_hardware; lsdahdi |
| 17:38.56 | coppice | Katty: ipods are great. iphones are great. best in class, without a doubt. I just hate the idea of buying anything from apple for my own use |
| 17:39.32 | Katty | coppice: i can certainly agree with that |
| 17:39.44 | *** join/#asterisk Z_God (~julius@wlan229200.mobiel.utwente.nl) |
| 17:40.00 | yahh | tzafrir: http://pastebin.com/3MNDQP9W |
| 17:40.55 | tzafrir | yahh, what happens if you run: dahdi_cfg #? any error? |
| 17:41.01 | Katty | coppice: but that's what dirpy is for, right? (= |
| 17:41.18 | yahh | tzafrir: no error |
| 17:41.32 | tzafrir | good. What's the output of lsdahdi now? |
| 17:41.59 | yahh | it is generating system.conf file but there is no configuration for AEX410P |
| 17:42.14 | yahh | lsdahdi output is also in above given link |
| 17:42.34 | tzafrir | yahh, I just wonder if the output has changed |
| 17:42.54 | *** join/#asterisk moy (~chatzilla@74.12.131.89) |
| 17:43.41 | ruchir | why odbc vm connection keeps dropping |
| 17:44.17 | Katty | maybe your cookie sacrafice was not good enough |
| 17:44.35 | yahh | tzafrir: not getting you |
| 17:45.28 | tzafrir | yahh, the output of lsdahdi may change due to running dahdi_cfg |
| 17:45.39 | yahh | ohh sorry |
| 17:45.43 | yahh | let me get it |
| 17:47.15 | *** join/#asterisk dwayne (~dwayne@c-71-207-214-190.hsd1.al.comcast.net) |
| 17:47.33 | yahh | it is got changed |
| 17:47.39 | yahh | here it is http://pastebin.com/xm3gpkgv |
| 17:48.54 | *** join/#asterisk MrOddwire (~typ0@82-70-177-150.dsl.in-addr.zen.co.uk) |
| 17:49.07 | *** join/#asterisk geneticx_wrk (~geneticx_@host-208-88-126-198.biznesshosting.net) |
| 17:50.04 | yahh | tzafrir: here is the system.conf generated by dahdi_genconf http://pastebin.com/BttbqY9w |
| 17:50.49 | tzafrir | yahh, ok. now it has signalling. looks like that config is ok |
| 17:51.07 | tzafrir | The standard dahdi init.d script should also run dahdi_cfg for you |
| 17:51.37 | cusco | so.. would anybody know... shouldn't both asterisks in a IAX trunk share the UNIQUEID? |
| 17:51.37 | yahh | ok.. |
| 17:51.44 | *** join/#asterisk jerris[1] (~jerris@70.103.60.234) |
| 17:51.48 | tzafrir | dahdi_genconf also generate /etc/asterisk/dahdi-channels.conf which you should #include or merge into chan_dahdi.conf |
| 17:52.19 | yahh | tzafrir: but how to configure a channel for that signaling |
| 17:52.44 | tzafrir | yahh, configure where? In asterisk? |
| 17:52.55 | yahh | yes |
| 17:55.24 | *** join/#asterisk outtolunc (~me@adsl-66-218-53-172.dslextreme.com) |
| 17:56.31 | *** join/#asterisk Ad-Hoc (~nimbus@62.1.237.202.dsl.dyn.forthnet.gr) |
| 17:56.49 | *** join/#asterisk sarthor (~sarthor@unaffiliated/sarthor) |
| 17:57.04 | s34n | I have a Polycom Sounpoint IP 430 that seems to dhcp fine and picks up config files from the server, but it never tries to register. |
| 17:57.20 | tzafrir | yahh, have you looked at the file I pointed you to? |
| 17:58.20 | yahh | <PROTECTED> |
| 17:58.31 | s34n | I have specified reg.x.address, reg.x.type, reg.x.auth.userId, reg.x.auth.password, reg.x.server.1.address, reg.x.outboundProxy.address, reg.x.lineKeys, etc. |
| 17:59.42 | yahh | <PROTECTED> |
| 17:59.56 | yahh | there is no configuration for Span 7: WCTDM/0 "Wildcard AEX410 Board 1 |
| 18:01.43 | s34n | but when I sniff the connection, I see know SIP traffic at all |
| 18:01.50 | leifmadsen | dahdi-channels.conf? I thought it was chan_dahdi.conf |
| 18:01.55 | s34n | s/know/no/ |
| 18:02.06 | leifmadsen | unless perhaps you're using a GUI of some sort |
| 18:02.37 | *** join/#asterisk ManxPower-work (~manxpower@216.186.151.147) |
| 18:03.10 | *** join/#asterisk ccesario (~ccesario@189-19-6-236.dsl.telesp.net.br) |
| 18:05.51 | ManxPower-work | ~naswers |
| 18:05.54 | ManxPower-work | ~answers |
| 18:05.55 | infobot | methinks answers is Asterisk Book: http://astbook.asteriskdocs.org & SIP w/ NAT: http://www.aocomputing.net/?p=3 & Wiki: http://www.voip-info.org & docs: /path/to/src/asterisk/doc & 1.4 .vs. 1.6.0 .vs. 1.6.1: : /path/to/src/asterisk/UPGRADE*.txt |
| 18:06.05 | ruchir | odbc vm anyone? |
| 18:06.27 | yahh | tzafrir: there is no configuration for Span 7: WCTDM/0 "Wildcard AEX410 Board 1 |
| 18:07.07 | yahh | in dahdi-channels.conf |
| 18:08.32 | grEvenX | ruchir: what about it? |
| 18:08.50 | ManxPower-work | No thank you, I prefer pizza. |
| 18:08.53 | tzafrir | yahh, hmm... it identifies it as "no module"? That's odd. What version of dahdi-linux and of dahdi-tools? |
| 18:08.57 | grEvenX | hehe |
| 18:09.41 | yahh | tzafrir: dahdi-linux-complete-2.2.1+2.2.1 |
| 18:10.12 | *** join/#asterisk Micc_ (~quassel@c-98-225-57-96.hsd1.wa.comcast.net) |
| 18:10.33 | ruchir | grEvenX: time to time asterisk odbc vm disconneccts and i see warnings like below \ |
| 18:10.35 | ruchir | http://pastebin.com/tZBV26rB |
| 18:10.54 | yahh | tzafrir: it is latest |
| 18:11.46 | yahh | tzafrir: asterisk version is asterisk-1.4.29 |
| 18:11.56 | tzafrir | yahh, hmm... the ugly code to check for the type of module in each socket of that card is in the perl module Dahdi::Cahn |
| 18:12.03 | tzafrir | What linux distro is it? |
| 18:12.41 | yahh | it is centos 5.4 |
| 18:12.46 | grEvenX | ruchir: too me it looks more like an MySQL issue, sure the problem isn't there? |
| 18:12.57 | Naikrovek | s34n: do you have the file that tells it how to register and where to register to? |
| 18:13.11 | ruchir | grEvenX: whatt could be wrong with mysql |
| 18:13.19 | yahh | tzafrir: and kernel 2.6.18-164.el5 #1 SMP |
| 18:13.32 | tzafrir | well, I guess it would be simpler to debug it by running ./xpp/dahdi_genconf from the tools/ source directory |
| 18:13.52 | yahh | let me try |
| 18:13.56 | tzafrir | then the perl module is at xpp/perl_modules/Dahdi/Chan.pm |
| 18:14.12 | grEvenX | ruchir: don't know, check your mysql logs |
| 18:14.13 | s34n | Naikrovek: I have given it the registration server, auth id, and password |
| 18:14.23 | Naikrovek | s34n: okay |
| 18:14.39 | Naikrovek | s34n: is the phone uploading logs to the server? |
| 18:14.50 | s34n | Naikrovek: no |
| 18:15.09 | Naikrovek | s34n: hm. |
| 18:15.25 | s34n | Naikrovek: I haven't set up a syslog server for it |
| 18:15.32 | tzafrir | that's odd. lsdahdi identified the types properly |
| 18:15.51 | Naikrovek | s34n: in the config file, tell it to upload logs to the (t)ftp server it gets config files from |
| 18:16.04 | Naikrovek | s34n: then you'll get to see what the error is |
| 18:16.37 | grEvenX | ruchir: I'm 90% certain that the message "Access denied for user 'root'@'..." comes from MySQL... |
| 18:16.59 | tzafrir | yahh, can you try running 'dahdi_genconf' again and see if it generates proper config for that span now? |
| 18:17.31 | yahh | <PROTECTED> |
| 18:17.36 | yahh | but it is the same |
| 18:19.55 | ruchir | i see |
| 18:20.13 | *** join/#asterisk ltd_wk (~z@sixified.transact.net.au) |
| 18:20.24 | Katty | you know, josh turner kinda looks like gerard butler |
| 18:20.54 | Katty | just sayin |
| 18:22.10 | s34n | Naikrovek: how? |
| 18:22.35 | s34n | Naikrovek: how do I tell it to tftp logs? |
| 18:22.49 | *** join/#asterisk Tim_Toady (~moi@77.49.45.81.dsl.dyn.forthnet.gr) |
| 18:23.40 | Naikrovek | s34n: in the 0004f2abcdef.cfg file, put some lines in there to tell it where to upload the logs, then in ... let's take it to private messages |
| 18:24.16 | *** join/#asterisk Alric (~nbowyer@anvault.com) |
| 18:24.52 | yahh | tzafrir: anything which i should do which configure this |
| 18:25.46 | *** join/#asterisk Sargun (~Sargun@atarack/Staff/Sargun) |
| 18:33.05 | *** join/#asterisk adnc (~numer@unaffiliated/adnc) |
| 18:34.37 | *** join/#asterisk atis_work (~atis_work@193.238.212.171) |
| 18:35.18 | *** join/#asterisk githogori (~githogori@SJC-Office-DHCP-135.mail-abuse.org) |
| 18:38.57 | *** join/#asterisk Chainsaw (~chainsaw@gentoo/developer/atheme.member.chainsaw) |
| 18:42.42 | *** join/#asterisk lanning (~lanning@208.87.235.224) |
| 18:48.19 | *** join/#asterisk s0lid_st4te (~motoko@unaffiliated/s0lidst4te/x-734234) |
| 18:50.33 | *** join/#asterisk LemensTS (~LemensTS@adsl-70-238-175-27.dsl.stlsmo.sbcglobal.net) |
| 18:50.40 | LemensTS | . |
| 18:52.53 | carrar | ./~ |
| 18:53.02 | Slugs_ | . |
| 18:53.52 | *** part/#asterisk ManxPower-work (~manxpower@216.186.151.147) |
| 18:54.25 | *** join/#asterisk Rajmohan (~raj@122.165.25.171) |
| 19:00.45 | yahh | can someone give me good link to configure AEX410P (dahdi system.conf) |
| 19:00.49 | vader-- | hmm any of you guys good with dhcpd, I have DHCPD running on CentOS 5.4, i am getting no free leases errors, if i remove the pool line then it doesn't give me any errors and it gives the phone an ip address but it doesn't set the proper options. HEre is my conf file http://pastebin.com/3115qfGm |
| 19:00.54 | *** join/#asterisk thecardsmith_ (~doug@pool-71-161-218-3.burl.east.myfairpoint.net) |
| 19:01.19 | *** join/#asterisk ccesario (~ccesario@189-19-6-236.dsl.telesp.net.br) |
| 19:04.59 | *** join/#asterisk pabelanger (~pabelange@yoda.kanatek.com) |
| 19:05.40 | *** join/#asterisk Rajmohan (~raj@122.165.25.171) |
| 19:07.36 | ChannelZ | vader--: try moving the 'range' below the 'allow' lines, it might matter |
| 19:08.24 | vader-- | tried that |
| 19:08.45 | VoIP-Penguin | vader--: Why did you incorrectly configure it after I fixed it for you? |
| 19:08.50 | VoIP-Penguin | option domain-name "salesianum.local"; |
| 19:08.52 | VoIP-Penguin | option domain-name-servers 192.168.0.10; |
| 19:08.59 | VoIP-Penguin | Those belong INSIDE the subnet. |
| 19:09.05 | vader-- | voip-penguin you had me take out the pool setting |
| 19:09.10 | VoIP-Penguin | You didn't need it. |
| 19:09.22 | vader-- | when i remove the pool setting the classes don't work |
| 19:09.25 | VoIP-Penguin | You gave me a conf which was set up wrong, so of course I changed it. |
| 19:09.48 | *** join/#asterisk stope (~nobody@sud-cable-cmts3-69-60-242-213.vianet.ca) |
| 19:09.56 | VoIP-Penguin | Put it back the way I had it, and then change/configure what you need. |
| 19:10.21 | VoIP-Penguin | You don't even know what the pool option is for. |
| 19:10.28 | VoIP-Penguin | So you definitely don't need it. |
| 19:19.38 | *** join/#asterisk Chainsaw (~chainsaw@gentoo/developer/atheme.member.chainsaw) |
| 19:20.53 | *** join/#asterisk jblack (~jblack@pool-71-173-2-216.sctnpa.east.verizon.net) |
| 19:21.32 | *** join/#asterisk wonderworld (~ww@ip-62-143-22-226.unitymediagroup.de) |
| 19:24.16 | pabelanger | anybody working with asterisk on a powerpc? Trying to setup a development platform using qemu and having a rough time |
| 19:26.21 | Naikrovek | pabelanger: why powerpc |
| 19:26.25 | Naikrovek | just curious |
| 19:27.09 | *** join/#asterisk freddyk (~aaa@93-41-148-168.ip82.fastwebnet.it) |
| 19:27.18 | Chainsaw | Naikrovek: I'm guessing some embedded system. |
| 19:27.25 | Chainsaw | Naikrovek: PowerPC desktops are fairly rare these days. |
| 19:27.31 | Naikrovek | yeah |
| 19:27.34 | pabelanger | yup, an embedded board. |
| 19:27.39 | Katty | hi |
| 19:27.41 | Naikrovek | we compile a lot to powerpc here, in fact only to powerpc |
| 19:27.41 | freddyk | hello chainsaw |
| 19:27.43 | Chainsaw | Hello Katty :) |
| 19:27.48 | Naikrovek | but i doubt it's for the same reason you guys are :) |
| 19:27.51 | Chainsaw | Hi there freddyk. |
| 19:28.00 | Katty | what's happenin |
| 19:28.18 | Chainsaw | On a train, waiting to leave the station. |
| 19:28.21 | freddyk | there is an atx board with powerpc onboard |
| 19:28.25 | Katty | Chainsaw: amtrak? |
| 19:28.27 | freddyk | from an italian company |
| 19:28.29 | pabelanger | Naikrovek: are your host boxes PowerPC or are you cross-compiling? |
| 19:28.34 | freddyk | (an amiga style powerpc) |
| 19:28.38 | Chainsaw | Katty: East Coast. |
| 19:28.42 | Katty | ah |
| 19:28.46 | Naikrovek | crosscompiling with some pay-for software i'm not sure we need |
| 19:29.05 | Naikrovek | i don't see why they couldn't use GCC to compile for 5XX and 5XXX (i think those are right) |
| 19:29.07 | Chainsaw | Katty: http://en.wikipedia.org/wiki/Intercity_225 |
| 19:29.09 | Chainsaw | Katty: One of those :) |
| 19:29.11 | Katty | Chainsaw: sounds like you might have time for a nap here shortly (= |
| 19:29.13 | *** join/#asterisk darkdrgn2k (~darkdrgn2@CPE000c419e662f-CM0011aea0fa16.cpe.net.cable.rogers.com) |
| 19:29.32 | Chainsaw | Katty: And miss out on the steak sandwich? Never :> |
| 19:29.40 | Katty | lol |
| 19:30.01 | darkdrgn2k | hi i have setup an extension with the dial as local/18885555555@outbound setup But it seems that the DFMT tones are not passed through. Is there somethign more i need to do or do i have to dive into the dialplan to figure this out? |
| 19:30.29 | [TK]D-Fender | darkdrgn2k: Dialplan has nothing to do with DTMF reception |
| 19:30.58 | pabelanger | Agree. I'm trying to setup qemu for powerpc, so we can start rebuilding ubuntu packages for the embedded box, but can't get qemu to play nice emulating PowerPC |
| 19:31.35 | *** join/#asterisk slidesinger (~slidesing@c-68-44-99-50.hsd1.nj.comcast.net) |
| 19:31.37 | Naikrovek | pabelanger: is there a #qemu channel in here? /me checks. |
| 19:31.47 | Naikrovek | pabelanger: indeed there is |
| 19:31.51 | Naikrovek | they may be able to help you |
| 19:31.59 | Naikrovek | i've not even used qemu |
| 19:32.20 | pabelanger | well look at that! ;) poping in there to see what I can find |
| 19:33.21 | jerris[1] | I'm looking for good references that talk about how the voicemail works. Specifically, I'm running into an issue where it takes up to 30 minutes for the voicemail notification to appear on our Polycom phones after the message has been left. |
| 19:33.57 | jerris[1] | I've checked app_voicemail.c and the compiled code tells it to check every 30 seconds. |
| 19:34.20 | jerris[1] | But I'm not sure if that's the only system that dictates the process. |
| 19:34.41 | jerris[1] | Is there a way to see when that check is taking place? |
| 19:35.08 | Naikrovek | jerris[1]: it's probably more of an issue in deliverying the "you have a voicemail" message to the phone |
| 19:35.15 | Naikrovek | delivering* |
| 19:35.30 | *** join/#asterisk Micc__ (~quassel@c-98-225-57-96.hsd1.wa.comcast.net) |
| 19:35.31 | jerris[1] | Would that be a sip.conf issue? Or something more phone specific? |
| 19:35.47 | Chainsaw | Katty: The buffet bar is closed for safety reasons. I am not pleased :( |
| 19:35.54 | Katty | :<<< |
| 19:36.49 | Naikrovek | jerris[1]: if you have another make of phone you can try with that to see how it goes, if not, or in the meantime, provide us a sip debug of that phone's IP and let it go from when you place a call to it and leave a voicemail until the indicator on the phone ilghts up. pastebin it. |
| 19:37.25 | jerris[1] | ok. It might take me a little while to figure out how to do that. brb. |
| 19:38.13 | *** join/#asterisk tech|1 (miguemely@adsl-225-95-10.mia.bellsouth.net) |
| 19:38.16 | Naikrovek | jerris[1]: it's not like we can't help here. :) at the asterisk console, "sip debug ip 123.123.123.123 on" i think. IP being the IP of a phone you can reproduce this on |
| 19:38.21 | tech|1 | um |
| 19:38.23 | tech|1 | hi |
| 19:38.27 | tech|1 | i need help |
| 19:38.31 | Naikrovek | ask the question |
| 19:38.47 | tech|1 | what port does astreak run to connect to the GUI> |
| 19:38.58 | tech|1 | and how can i find the ip address of it? |
| 19:39.05 | Naikrovek | what gui |
| 19:39.09 | tech|1 | by whatsmyip.com |
| 19:39.11 | tech|1 | like |
| 19:39.15 | tech|1 | webconnect |
| 19:39.26 | Naikrovek | wow |
| 19:39.27 | VoIP-Penguin | You've configured your system, but don't know its IP address? |
| 19:39.28 | Naikrovek | really |
| 19:39.45 | tech|1 | um |
| 19:39.47 | Naikrovek | you're assuming he configured it |
| 19:39.52 | VoIP-Penguin | You're right. |
| 19:39.56 | tech|1 | well |
| 19:39.58 | tech|1 | can you help |
| 19:40.01 | tech|1 | i need it done |
| 19:40.04 | VoIP-Penguin | Since he's asking to connect to a gui, it must be configured. |
| 19:40.05 | tech|1 | for my phone |
| 19:40.07 | tech|1 | s |
| 19:40.12 | tech|1 | how? |
| 19:40.19 | Naikrovek | VoIP-Penguin: no i mean you're assuming HE configured it |
| 19:40.26 | VoIP-Penguin | ah |
| 19:40.26 | Naikrovek | i'm thinking someone else did |
| 19:40.33 | VoIP-Penguin | I can tell this isn't the right place for him, either way. |
| 19:40.34 | tech|1 | ive only installed it |
| 19:40.34 | Naikrovek | tech|1: hang on |
| 19:40.59 | [TK]D-Fender | tech|1: Installed WHAT? |
| 19:41.04 | Naikrovek | tech|1: asterisk is not something that is just for any new user to start tooling around with. it requires some basic Unix knowledge |
| 19:41.13 | VoIP-Penguin | [tk]d-fender: it |
| 19:41.17 | tech|1 | i mean |
| 19:41.26 | tech|1 | like connecting by a web browser |
| 19:41.29 | [TK]D-Fender | VoIP-Penguin: CLEARLY |
| 19:41.30 | Naikrovek | yeah we got that |
| 19:41.31 | tech|1 | what port does it run? |
| 19:41.34 | Naikrovek | 80 |
| 19:41.36 | Naikrovek | probably |
| 19:41.38 | tech|1 | ok |
| 19:41.39 | Naikrovek | but we don't do GUIs in here |
| 19:41.41 | tech|1 | wait just a sec |
| 19:42.15 | VoIP-Penguin | I think he's only about a year away from being ready to start with Asterisk. |
| 19:42.24 | Naikrovek | maybe |
| 19:42.31 | tech|1 | um |
| 19:42.32 | tech|1 | also |
| 19:42.35 | Naikrovek | depends on whether or not his boss is forcing him to do this |
| 19:42.50 | tech|1 | how can i find out the public ip adress? |
| 19:43.05 | [TK]D-Fender | tech|1: How do you not know it already? |
| 19:43.05 | tech|1 | not the 192.168.0.0 |
| 19:43.11 | tech|1 | i dont |
| 19:43.19 | Naikrovek | tech|1: you may want to head over to #linux |
| 19:43.20 | [TK]D-Fender | etchIts YOUR internet connection. |
| 19:43.26 | Naikrovek | [TK]D-Fender: you're assuming it's his |
| 19:43.31 | [TK]D-Fender | tech|1: Its YOUR internet connection. |
| 19:43.31 | Naikrovek | maybe it's his brothers' or something |
| 19:43.34 | vader-- | oh well i figured out the dhcp problem |
| 19:43.43 | jerris[1] | The command "sip debug" should be available from the CLI, right? |
| 19:43.47 | [TK]D-Fender | Naikrovek: I really don't care for stories either way |
| 19:43.55 | Naikrovek | jerris[1]: maybe it's core sip debug ip on |
| 19:43.56 | jerris[1] | Is there something I need to do to enable the command? |
| 19:44.01 | jerris[1] | ok. |
| 19:44.04 | jerris[1] | I'll check that. |
| 19:44.23 | tech|1 | also |
| 19:44.27 | tech|1 | its not 80 |
| 19:44.36 | tech|1 | ive just found that out |
| 19:44.49 | Naikrovek | tech|1: i get the feeling this is over your head a bit |
| 19:44.59 | Naikrovek | and i don't say that to insult you or to belittle you |
| 19:45.22 | Naikrovek | but we don't really know how to support people without some unix skillset of some sort |
| 19:45.45 | [TK]D-Fender | Naikrovek: Most of his questions probably ahve nothing to do with *NIX in any way |
| 19:46.01 | [TK]D-Fender | Naikrovek: Like know his public address, knowing what the hell he even installed |
| 19:46.05 | Naikrovek | [TK]D-Fender: well i think he could get his questions answered by a unix book pretty quit |
| 19:46.12 | tech|1 | centOS |
| 19:46.15 | Naikrovek | [TK]D-Fender: he may not have installed it. |
| 19:46.32 | [TK]D-Fender | Naikrovek: You mean a UNIX book will tell him how to manage his router and find his WAN IP? |
| 19:46.37 | VoIP-Penguin | vader--: Figured out it was configured wrongly and fixed it? |
| 19:46.48 | vader-- | nope it was configured correctly |
| 19:46.56 | VoIP-Penguin | I don't agree. |
| 19:46.57 | Naikrovek | [TK]D-Fender: it'll give his compass a bearing so he knows where to look and what to search for. |
| 19:47.00 | vader-- | just like it's configured on my production system |
| 19:47.00 | jerris[1] | Found it: sip set debug on |
| 19:47.09 | [TK]D-Fender | Naikrovek: What with this "may" BS trip you're on? Just ASK him already, not that it buys him anything... |
| 19:47.12 | vader-- | ya know those ^@ characters in the class identifier |
| 19:47.16 | vader-- | those are null characters |
| 19:47.29 | Qwell | null characters? |
| 19:47.30 | vader-- | when i copied the config over from my production system i copied and pasted it |
| 19:47.35 | Naikrovek | [TK]D-Fender: i don't want to belittle people or be derisive that's all. i don't see the point |
| 19:47.37 | vader-- | it wasn't identifying the phone |
| 19:47.45 | vader-- | thuse not giving an address |
| 19:47.46 | vader-- | all works now |
| 19:47.59 | VoIP-Penguin | So the classes weren't catching the devices. |
| 19:48.10 | vader-- | to get a null character in VI, CTRL-V,CTRL-@ gives you that |
| 19:48.12 | vader-- | correct |
| 19:48.13 | [TK]D-Fender | Naikrovek: You seem rather comfortable inventing and supported a worthless scenario without asking any useful questions about his actual setup |
| 19:48.16 | vader-- | not is it |
| 19:48.18 | vader-- | not it is |
| 19:48.27 | Qwell | that's not a "null" character. That would be a control character. |
| 19:48.30 | Naikrovek | [TK]D-Fender: trying to redirect him to another channel |
| 19:48.52 | cusco | hi... |
| 19:49.06 | tech|1 | hi |
| 19:49.10 | Katty | ohai |
| 19:49.14 | cusco | Im still trying to find out if two asterisks 1.6.2.6 in a iax trunk can share UNIQUEIDs... |
| 19:49.18 | Naikrovek | [TK]D-Fender: and i'm not sure what about his system (s)he'll be able to tell me |
| 19:49.30 | tech|1 | me? |
| 19:49.35 | Naikrovek | tech|1: yeah |
| 19:49.43 | vader-- | ok i need to figure out what my next step is going to be with setting up this test box |
| 19:49.48 | Katty | wow. isymphony's new client is 20mb |
| 19:49.50 | Naikrovek | tech|1: what can you tell me about your system and your situtaion |
| 19:49.55 | Naikrovek | situation* |
| 19:50.00 | vader-- | i guess i should move my SIP.conf from my 1.2 box over to the 1.6.2 box? |
| 19:50.12 | jerris[1] | Hmm... The delay is just as long for the voicemail notification icon to go away after deleting the voicemail too. |
| 19:50.18 | Katty | okay, so is the old one. false alarm. |
| 19:50.35 | [TK]D-Fender | [15:49]<Naikrovek>[TK]D-Fender: and i'm not sure what about his system (s)he'll be able to tell me <- so why ask huh? That's like a doctor willing to hand out prescriptions without even asking the patient what symptoms they have |
| 19:51.01 | Naikrovek | [TK]D-Fender: so you ask then. i'm done |
| 19:51.04 | Katty | leifmadsen: :< |
| 19:51.24 | Qwell | [TK]D-Fender: that's my kind of doctor |
| 19:51.39 | *** join/#asterisk astrutt (astrutt@pinky.ratman.org) |
| 19:51.42 | Katty | ^- hypochondriac |
| 19:51.44 | [TK]D-Fender | Qwell: Until you realize he only hands our Cyanide |
| 19:51.47 | [TK]D-Fender | out* |
| 19:51.51 | Qwell | Katty: quiet you. |
| 19:51.51 | jerris[1] | That doctor taking patients? |
| 19:51.56 | Qwell | Katty: I haven't even told you the latest one :P |
| 19:52.06 | Katty | Qwell: it's okay. i am too |
| 19:52.24 | *** join/#asterisk mog (~mog@c-68-62-169-225.hsd1.al.comcast.net) |
| 19:52.28 | jerris[1] | waiting for the icon to go away...... |
| 19:52.31 | eppigy | hypochondriac |
| 19:52.34 | jerris[1] | nap time. |
| 19:52.36 | eppigy | hangin out at the laundry mat |
| 19:52.41 | Katty | Qwell: my current one is perminent hearing damage from 3 pills of prozac. |
| 19:52.45 | eppigy | where all the raunchy white tarshy blondes be at |
| 19:52.53 | Katty | Qwell: what's yours |
| 19:53.00 | Katty | eppigy: yeah but you don't know where they've been |
| 19:53.03 | Qwell | Katty: we'll see soon |
| 19:53.09 | Katty | Qwell: -> |
| 19:53.13 | Qwell | today, if they ever call me. |
| 19:53.16 | eppigy | dressed like a sailor standin by a pale of garbage |
| 19:53.30 | eppigy | its been 4 hours and im still tryna nail a trailor park b&**h |
| 19:54.34 | jerris[1] | Olive Oil? |
| 19:54.54 | Naikrovek | you're trying to nail a lady of the evening? dude they come to you |
| 19:55.02 | Naikrovek | you must be lookin a bit sophisticated |
| 19:57.00 | jdoe | how can I determine from the AMI if a queue member didn't pick up? |
| 19:57.06 | jdoe | there's nothing special about the hangup event that I can see. |
| 19:58.06 | jerris[1] | and the icon went away. |
| 19:58.27 | Naikrovek | jerris[1]: pastebin the sip debug and paste the link in here |
| 19:58.28 | Naikrovek | ~pb |
| 19:58.29 | infobot | [~pb] A "pastebin" is a web-based service where you should paste anything over 3 lines so you don't flood the channel. Here are links to a few : http://www.pastebin.com , http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org , http://bin.cakephp.org/ , http://asterisk.pastey.net/ , or install pastebinit with yum or aptitude. |
| 19:58.40 | jerris[1] | yup. |
| 20:00.08 | Nugget | It's tricky to rock a rhyme, to rock a rhyme that's right on time. It's tricky. |
| 20:00.37 | Katty | NUGGET |
| 20:00.40 | Katty | WHY OUTTA JUST |
| 20:00.41 | Katty | JUST |
| 20:00.42 | Katty | HUG YOU |
| 20:00.44 | Katty | hugs Nugget |
| 20:00.46 | *** join/#asterisk evil_gordita (~evilgordi@ip70-188-50-186.rn.hr.cox.net) |
| 20:00.48 | Nugget | :D |
| 20:01.18 | jerris[1] | Hope you guys know what you're looking for cause it's over 30,000 lines of debug code. |
| 20:01.40 | Kobaz | heh |
| 20:01.53 | *** join/#asterisk fink (~guest@static-162-84-93-164.fred.east.verizon.net) |
| 20:02.59 | Naikrovek | jerris[1]: 30,000 really |
| 20:03.04 | Naikrovek | whatever, paste it |
| 20:03.09 | Naikrovek | i need practice at this |
| 20:03.16 | jerris[1] | haha. |
| 20:03.18 | *** join/#asterisk bbsf1 (~bill@c-24-7-33-185.hsd1.ca.comcast.net) |
| 20:03.56 | jerris[1] | go figure. PasteBin is crapping itself trying to copy that much text. |
| 20:04.05 | Naikrovek | email it to me |
| 20:04.10 | Naikrovek | i'll pm you my email |
| 20:05.28 | Chainsaw | Katty: Actually it's all good. Apparently just standard class is affected :) |
| 20:05.28 | Chainsaw | sips on his tea |
| 20:05.28 | Katty | Chainsaw: what? |
| 20:05.28 | Katty | Chainsaw: why is only standard class affected? |
| 20:06.11 | Chainsaw | Katty: I think the kitchen is fine, basically. Turns out there's a leak near the bar, so they won't be selling drinks in standard. But in first you get at seat service anyway. |
| 20:06.44 | *** join/#asterisk MrOddwire (~typ0@cpc3-dals8-0-0-cust239.hari.cable.virginmedia.com) |
| 20:07.16 | jerris[1] | I'm thinking I don't know how to debug in Asterisk. |
| 20:07.20 | VoIP-Penguin | What is the effective difference between using Goto and using Dial on a local channel in the dialplan? |
| 20:08.02 | Katty | Chainsaw: ah, right. |
| 20:08.19 | Katty | Chainsaw: with amtrak, i don't think they have a 'standard class' |
| 20:08.19 | VoIP-Penguin | exten => 2000,1,Goto(misc,test,1) |
| 20:08.19 | VoIP-Penguin | exten => 2000,1,Dial(Local/test@misc) |
| 20:08.29 | *** join/#asterisk bn-7bc (bjarne@mac.lan.noare-1.holmedal.net) |
| 20:08.32 | VoIP-Penguin | Any effective difference there? |
| 20:08.33 | Katty | Chainsaw: they always have attendants walking back and forth checking on folks |
| 20:08.49 | Chainsaw | Katty: Neat. And proper seat pitch everywhere? |
| 20:09.01 | Katty | Chainsaw: all the seats are adjustable on amtrak |
| 20:09.08 | Katty | Chainsaw: and they have pillows and blankets if you need one |
| 20:09.17 | MrOddwire | Hey guys, quick question. Is it possible to setup asterisk to route skypeIn calls to skypeOut numbers without having to purchase a hardware interface. So basically purely route calls via the internet? |
| 20:09.18 | Katty | Chainsaw: two bathrooms on every car |
| 20:09.22 | [TK]D-Fender | VoIP-Penguin: Yes, extra CDR's, more active channels and overhead, etc |
| 20:09.28 | Chainsaw | Katty: It must take ages to get anywhere on Amtrak then. |
| 20:09.29 | Katty | Chainsaw: one at the front and one at the back |
| 20:09.36 | *** join/#asterisk marienz (marienz@freenode/staff/marienz) |
| 20:09.40 | Katty | Chainsaw: from St. Louis to KC is about 8hrs |
| 20:09.43 | Chainsaw | Katty: These trains take 5 to 7 hours max (if they go to the tip of Scotland) |
| 20:09.45 | VoIP-Penguin | [tk]d-fender: So Goto() would be preferred to reduce overhead? |
| 20:10.02 | Katty | Chainsaw: yes it takes us awhile |
| 20:10.03 | jerris[1] | Imagine going to Europe from China on a train... |
| 20:10.03 | Chainsaw | Katty: But my trip from London to Peterborough is only 50 minutes :) |
| 20:10.13 | Katty | Chainsaw: how many miles/km is that? |
| 20:10.22 | Katty | Chainsaw: or what is your average travel speed? |
| 20:10.25 | Chainsaw | Katty: About 75 miles I think. |
| 20:10.30 | Chainsaw | Katty: Maybe a little more. |
| 20:10.33 | Katty | Chainsaw: yeah that's a lot faster than amtrak |
| 20:10.36 | jerris[1] | http://www.physorg.com/news188032347.html |
| 20:10.48 | Kobaz | VoIP-Penguin: you only need local channels when you need dialplan to behave like a device |
| 20:10.53 | VoIP-Penguin | AmTrak should run about 65 MPH, I think. |
| 20:10.54 | jerris[1] | 3 days. |
| 20:11.15 | Katty | Chainsaw: i think the limit for amtrak is 150mph, but when they're going through cities they can't do that |
| 20:11.17 | jerris[1] | I can't imagine spending 3 days on a train. |
| 20:11.17 | Chainsaw | Ah, yes. |
| 20:11.20 | Chainsaw | These top out at 225kph. The signalling limits it to 200kph though. |
| 20:11.28 | Katty | Chainsaw: i believe city speed is about 40 |
| 20:11.34 | Chainsaw | Katty: Oh yuck :( |
| 20:11.40 | Chainsaw | Katty: That reminds me of Irish trains. |
| 20:11.44 | *** part/#asterisk LemensTS (~LemensTS@adsl-70-238-175-27.dsl.stlsmo.sbcglobal.net) |
| 20:11.51 | Chainsaw | Katty: Diesel-powered and slow. |
| 20:11.52 | Kobaz | Chainsaw: you want high speed... move to china... they are building lines that do 350mph |
| 20:11.54 | [TK]D-Fender | VoIP-Penguin: Yes |
| 20:12.00 | Katty | Chainsaw: there's not been a lot of improvements to our railways |
| 20:12.06 | Chainsaw | Kobaz: But I wouldn't want to live there. It's so crowded :( |
| 20:12.14 | Katty | Chainsaw: which is very sad...they are a very economical way to travel |
| 20:12.29 | Chainsaw | Katty: *nod* I'm quite pleased with how they arrange tickets here. |
| 20:12.39 | Katty | Chainsaw: supposedly we're getting a bullet train along the west cost, but i'm not sure of the timeline on it |
| 20:12.42 | Chainsaw | Katty: If you pre-book and commit to a time the tickets are very affordable. |
| 20:12.47 | Katty | Chainsaw: same with amtrak |
| 20:12.58 | Katty | Chainsaw: we can buy tickets at the station, but they're twice the price generally |
| 20:13.08 | Katty | Chainsaw: i can do round trip to chicago and back from southern missouri, for about 40 bucks |
| 20:13.09 | VoIP-Penguin | According to Amtrak, they don't go over 105 MPH. |
| 20:13.09 | Chainsaw | Katty: Yes. Somehow my colleagues always do that though. |
| 20:13.15 | marienz | newbie question: does it make any sense to try to use asterisk as a headless softphone, using some usb handset with buttons? |
| 20:13.30 | Katty | i read that as headless horseman |
| 20:13.44 | Kobaz | asterisk can fill all your headless horsemen requirements |
| 20:13.49 | Katty | hehehe |
| 20:13.50 | Chainsaw | marienz: It's a very flexible toolkit. I believe you can make that work, yes. |
| 20:13.58 | Katty | marienz: personally, i wouldn't do that |
| 20:14.15 | marienz | Katty: which part(s) of what I'm trying to do wouldn't you do? |
| 20:14.17 | Katty | marienz: i would stick with a hardware phone, or get a softphone and a wireless headset |
| 20:14.30 | Katty | marienz: something like a logitech gaming headset |
| 20:14.34 | marienz | hmm |
| 20:14.40 | *** join/#asterisk freddyk (~aaa@93-41-115-188.ip81.fastwebnet.it) |
| 20:14.46 | Katty | they're designed to be worn for a good long while, and the range is pretty decent |
| 20:14.51 | marienz | Katty: why, though? because this is too much hassle to set up, or won't work reliably, or what? |
| 20:15.04 | marienz | I'm not going to use this much, it'd be my home phone |
| 20:15.16 | *** join/#asterisk ruben23 (~ITadmin@122.55.48.243) |
| 20:15.22 | Katty | well i've never done usb stuff before. never priced it. |
| 20:15.41 | marienz | I already have a usb handset that I'm hoping will work (someone wasn't using it) |
| 20:15.41 | Katty | but if you used a software phone and a headset, you wouldn't really be dumping money into something you'd only use when the phone rang |
| 20:15.51 | Katty | ah, well in that case feel free |
| 20:15.58 | Katty | might as well try to get it to work if you've already got it. i would. |
| 20:16.07 | Chainsaw | marienz: But I see Katty's point, you might be better off with an IAX/SIP soft phone. |
| 20:16.07 | Chainsaw | marienz: There will be less configuration involved with that :) |
| 20:16.10 | VoIP-Penguin | The federally established speed limit for passenger trains there is 79 MPH, as of three months ago. |
| 20:16.32 | Katty | VoIP-Penguin: k |
| 20:16.40 | marienz | I'm considering getting fancy and also running a more fully-featured softphone on my desktop system |
| 20:16.41 | Chainsaw | Ah, approaching my stop. Back later. |
| 20:16.54 | Katty | marienz: i've never ran anything fancier than zoiper |
| 20:16.59 | Katty | marienz: but i really didn't have a need to |
| 20:17.04 | Kobaz | i like twinkle |
| 20:17.04 | Katty | marienz: calling my mom doesn't take much |
| 20:17.13 | marienz | asterisk is a little overwhelming if you've never done anything with sip before |
| 20:17.27 | Katty | marienz: yes there are a lot of options and features to tinker with |
| 20:17.41 | Katty | marienz: but it's designed to play with the best |
| 20:17.50 | Katty | marienz: so it's gonna be a bit complicated |
| 20:18.00 | marienz | also, I kind of need linux and the handset to get along first before I move on to asterisk. I think that part's a little unhappy still and that's why asterisk won't go |
| 20:18.23 | vader-- | have any of you guys converted a Asterisk 1.2 box to 1.6? |
| 20:18.51 | marienz | the handset shows up as an alsa soundcard, so that's good. What I'm a little worried about is the buttons: the handset isn't generating tones when they're pressed, it shows up as a usb hid device |
| 20:19.14 | marienz | getting asterisk to respond to that may take some doing, iiuc. |
| 20:19.15 | vader-- | just looking for steps you used |
| 20:20.20 | Kobaz | vader--: compile 1.6, read the UPGRADE* docs.. test your system on a TEST system... make sure everything still works... put it into production... pray |
| 20:20.47 | Katty | vader--: personally, i wouldn't |
| 20:20.57 | Katty | vader--: i would just setup a test server, and get it working, then move it into production |
| 20:20.58 | Kobaz | Katty: you're against everything |
| 20:20.58 | *** join/#asterisk nickaugust (~anonymous@rrcs-24-73-135-216.se.biz.rr.com) |
| 20:21.11 | Katty | vader--: that way you can run them side by side until your satisified with the results |
| 20:21.18 | Katty | Kobaz: i so am. |
| 20:21.22 | Kobaz | heh |
| 20:21.22 | VoIP-Penguin | I would install the new version, then copy my device definitions from the old system, upgrading their options as needed. |
| 20:21.23 | Katty | Kobaz: except healthcare reform. |
| 20:21.33 | Kobaz | what about fines for people without health care |
| 20:21.41 | Kobaz | i think that's completely retartded |
| 20:21.45 | Kobaz | retarded |
| 20:21.57 | VoIP-Penguin | retart dead |
| 20:21.57 | Katty | well i think they need to carry it |
| 20:22.07 | Kobaz | there you go |
| 20:22.10 | jblack | Ok. the arduino is too cool by half. |
| 20:22.23 | Katty | but i'm not sure /how/ you're going to get people to carry it, unless there are consequences |
| 20:22.23 | Kobaz | Katty: carry what, who? |
| 20:22.29 | jblack | katty: I'm -sure- you could use one of these to automate recording on your critter cam. |
| 20:23.00 | Katty | Kobaz: carrying insurance |
| 20:23.13 | Katty | Kobaz: in a few years, people won't think twice about it |
| 20:23.16 | Kobaz | Katty: people who can afford to pay for their own health costs should not be penalized by fining and pumping yet even more money into a corrupt system |
| 20:23.35 | Katty | Kobaz: i think that japan's thing is probably a bit better. but everyone is still required to carry insurance there--whether public or private |
| 20:23.38 | jblack | Kobaz: Would you make the same argument about car insurance? |
| 20:23.49 | Katty | not everyone has car insurance tho |
| 20:23.56 | Katty | those who don't drive don't carry it |
| 20:23.56 | Kobaz | jblack: car insurance is something different entirely |
| 20:24.01 | Katty | and they're not penalized if they don't have it |
| 20:24.06 | Katty | so it really doesn't apply |
| 20:24.09 | Kobaz | jblack: car insurance is about protecting other people... not yourself |
| 20:24.25 | cusco | other people... from yourself |
| 20:24.27 | Katty | but i think making everyone carry health insurance is a good idea. |
| 20:24.35 | Kobaz | Katty: if the government pays for it |
| 20:24.36 | cusco | me too |
| 20:24.38 | jerris[1] | jblack: Have you looked at a Parallax Propeller chip? Or a chameleon? |
| 20:24.43 | Katty | i don't know what is in place for those who can't really afford it |
| 20:24.44 | cusco | Kobaz: yes |
| 20:24.52 | Kobaz | health care for everyone! but wait... pay us... or.... pay us |
| 20:24.55 | Katty | they would probably qualify for something |
| 20:25.08 | Katty | my mother will have to deal with the situation soon enough |
| 20:25.13 | Katty | but i think it's trivial. |
| 20:25.14 | jblack | I hate that idea. I think there' speople that have trouble buying basic necessities, and now you're forcing them to spend it on something else. |
| 20:25.23 | jblack | jerris[1]: No, I haven't. |
| 20:25.24 | Katty | espeically when my father is going to have to start taking insulin shots, at 500 bucks a month |
| 20:25.42 | Kobaz | 500 bucks a month is still cheaper than paying 1400 a month for full coverage |
| 20:25.47 | cusco | jblack: I consider health a basic necessitie |
| 20:25.50 | jerris[1] | http://www.xgamestation.com/view_product.php?id=51 |
| 20:25.58 | cusco | else, if you break a leg, how do you go and treat it? |
| 20:26.00 | Katty | Kobaz: it won't cost 1400 a month |
| 20:26.08 | Katty | Kobaz: price freezing starts at 2011 |
| 20:26.13 | bbsf1 | anyone willing to try to help me get some DAHDI channels working? |
| 20:26.23 | Katty | Kobaz: rates are then lowered until it's comparible to medicare/medicade |
| 20:26.24 | cusco | bbsf1: what is wrong? |
| 20:26.27 | *** join/#asterisk tzafrir (~tzafrir@212.179.75.202) |
| 20:26.27 | jerris[1] | This guy puts an Arduino together with a Propeller chip to give it easy multimedia capabilities. |
| 20:26.32 | bbsf1 | cusco: no dialtone |
| 20:26.40 | Kobaz | i haven't had health coverage for like 3 years |
| 20:26.41 | Katty | Kobaz: when 2014 comes along, there should be plenty of players in the market |
| 20:26.48 | Katty | Kobaz: and i really think it'll be like japan by then with a public option |
| 20:27.05 | adnc | the disposition field is filled with numbers, i can not find any refering table that matches to the numbers, where can i find one that describes these values for asterisk 1.4? |
| 20:27.09 | Katty | Kobaz: but regardless, the prices will be dropping drastically |
| 20:27.09 | jblack | jerris[1]: Same chip, but more expensive. |
| 20:27.20 | Kobaz | i had some medical procedures done... upper gi scope, stuff like that... it was no more than $3500 |
| 20:27.26 | Katty | Kobaz: health insurance rates have risen 700% in the last few years |
| 20:27.30 | Kobaz | Katty: yeah i know |
| 20:27.31 | jblack | Acutally, huh |
| 20:27.49 | Kobaz | paing 3500 out of pocket was WAY cheaper than having been paying 6000+ a year for coverage |
| 20:27.52 | Naikrovek | jblack: no forcing happens until 2014, and if there's a price problem i'm sure lots of people will jump at the chance to remove the "pay for insurance or pay a fine" requirement |
| 20:28.02 | Katty | Kobaz: i dont' think you'll be forced to pay an unreasonable ammount of money for it. plus it'll probably be in a sliding price scale by 2014 if your incoming isn't Top Notch |
| 20:28.11 | Naikrovek | time will tell |
| 20:28.15 | Katty | yes, time will tell |
| 20:28.19 | Naikrovek | arduino mega is the awesome |
| 20:28.25 | jblack | Maybe instead of worrying about health insurance, we should be getting control of the industry and making health care affordable. |
| 20:28.33 | Naikrovek | one of the little sprinkles on life's salad bar that everyone needs to sample |
| 20:28.35 | Katty | but we can't have people dying because they can't afford to stay healthy |
| 20:28.44 | jblack | There's no reason 20 minute office visits should cost $400. |
| 20:28.49 | Katty | yeah |
| 20:28.50 | Naikrovek | jblack: agreed |
| 20:28.54 | Katty | japan pays 15 bucks for an mri |
| 20:28.58 | Kobaz | jblack: exactly.... there's no reason a 5 minute doctors visit should be billed at $250 to insurance companies |
| 20:29.04 | Katty | there's no reason we can't have that |
| 20:29.17 | Kobaz | jblack: hah 400, where do they charge that much? |
| 20:29.23 | Naikrovek | when i lived in Australia I got a CAT scan for $250 and I got to keep the hard copy of the scans |
| 20:29.33 | Naikrovek | Kobaz: specialists charge like that |
| 20:29.46 | Katty | china has one of the largest, close living, populations int he world. |
| 20:29.53 | jblack | Kobaz: That's what my insurance is charged every time I see a civilian doctor. My primary charges something like $325 a visit and my endocrinologist well over 450. |
| 20:29.57 | VoIP-Penguin | a CT scan for $250 sounds cheap. |
| 20:29.57 | Katty | yet they are one of the healthiest populations, with the best preventative care |
| 20:30.01 | Kobaz | insane |
| 20:30.04 | Kobaz | it's like around 250 here |
| 20:30.16 | Katty | jblack: do you go to the VA? |
| 20:30.27 | jblack | The shot I take costs over $3,000 each, and I take 2 a month. |
| 20:30.31 | Naikrovek | VoIP-Penguin: it was cheap, and it was good |
| 20:30.41 | Katty | jblack: yeah there's just no reason for that |
| 20:30.41 | Kobaz | stuff like that, you need insurance |
| 20:30.46 | jblack | Katty: For routine stuff. Any time any sort of thought is required, I get a civilian doctor. |
| 20:30.59 | VoIP-Penguin | Maybe we should all go to Australia when we need some health care. |
| 20:30.59 | Katty | nods |
| 20:31.02 | jblack | i.e. I have real doctors tell the VA doctors what to do. |
| 20:31.03 | Kobaz | or canada |
| 20:31.05 | Katty | i'd prefer to go to china |
| 20:31.10 | Katty | i like their setup |
| 20:31.31 | Katty | you go to any doctor you want, there's never much waiting. usually you can see them the same day |
| 20:31.32 | jblack | what? 3000 year old tech that doesn't work? |
| 20:31.38 | Katty | prices are all fixed, and set every year |
| 20:31.43 | Katty | so i can see whoever i want. |
| 20:31.44 | jblack | Oh. So they do have modern medicine? |
| 20:31.45 | Katty | for 1 price |
| 20:31.53 | jblack | I think most countries are like that, no? |
| 20:31.54 | Katty | and they all compete in quality for the population's business |
| 20:32.02 | Katty | i'm not sure if cananda settles on price fixing for a year |
| 20:32.09 | jblack | the US is the only industrialized country that doesn't fix prices, right? |
| 20:32.11 | Katty | i dont' think they do tho |
| 20:32.34 | Katty | let's ask a canadian |
| 20:32.36 | jblack | Wow, this chameleon thing looks cool |
| 20:33.12 | Katty | leifmadsen: does your country settle on a price for medical items each year? an MRI will cost x ammount of money, no matter where you go or who you see? |
| 20:34.01 | Naikrovek | Katty: medicare does that |
| 20:34.05 | Naikrovek | except it hasn't changed for a few years |
| 20:34.55 | jblack | jerris[1]: Am I understanding this chameleon right? |
| 20:35.07 | *** join/#asterisk grEvenX (~even@cC0FD00C3.dhcp.bluecom.no) |
| 20:35.18 | jblack | For about the same price, I can have -vga-? |
| 20:35.26 | jerris[1] | Yup. |
| 20:36.03 | *** join/#asterisk atis_work (~atis_work@193.238.212.171) |
| 20:36.09 | Katty | Naikrovek: canada has medicare? or you're talking about here in the usa |
| 20:36.19 | Naikrovek | here in the US |
| 20:36.24 | jblack | hell, a ps/2 port. just.. wow |
| 20:36.35 | Katty | Naikrovek: can you walk into any doctor's office with medicare/medicade? |
| 20:36.41 | jerris[1] | They've got a lot of source for it too. |
| 20:36.49 | jblack | and from the way I read this, -everything- on the arduino's I've been reading up on is here. |
| 20:36.52 | jerris[1] | Basically, the Propeller stuff is preprogrammed. |
| 20:36.57 | adnc | is it possible to pass dispositionstring=yes to sqlite cdr? |
| 20:37.06 | Katty | Naikrovek: or do you have to go to an office which takes medicare |
| 20:37.08 | *** part/#asterisk darkdrgn2k (~darkdrgn2@CPE000c419e662f-CM0011aea0fa16.cpe.net.cable.rogers.com) |
| 20:37.18 | Naikrovek | Katty: you have to qualify for medicare |
| 20:37.25 | Katty | Naikrovek: i understand that |
| 20:37.31 | Katty | Naikrovek: but can you go anywhere you want if you qualify for it? |
| 20:37.34 | russellb | guys, seriously, health care in #asterisk? |
| 20:37.59 | Naikrovek | russellb: true, but everyone has an opinion on this and i was sick once |
| 20:38.08 | Naikrovek | Katty: think so yes |
| 20:38.09 | Katty | Naikrovek: i bet the children's healthcare thing is the same way... |
| 20:38.12 | jblack | Well, asterisk is phone systems, 911 uses phone systems, you call 911 when you need emergency health care. |
| 20:38.14 | Naikrovek | Katty: not positive |
| 20:38.14 | jerris[1] | I know I'm going to look like a complete n00b, but what do you type to send a message to someone in the public room so everyone can see? |
| 20:38.15 | Katty | Naikrovek: well that's really cool. |
| 20:38.20 | jblack | So completely related, russelb! =) |
| 20:38.22 | vader-- | have any of you worked with an Adtran 900 series voip gateway? |
| 20:38.35 | jerris[1] | IE, "jblack: message" |
| 20:38.42 | jblack | jerris[1]: I don't know what the propeller stuff is yet |
| 20:38.46 | Naikrovek | Katty: my child has state-funded health care. she can go anywhere we've ever tried to take her |
| 20:38.54 | Katty | Naikrovek: how old is she? |
| 20:38.59 | Naikrovek | 4 |
| 20:39.01 | Naikrovek | erm |
| 20:39.01 | Naikrovek | 5 |
| 20:39.06 | Katty | nods |
| 20:39.08 | Naikrovek | typo, i didn't forget |
| 20:39.18 | Katty | Naikrovek: what's the age range for the children's healthcare hting |
| 20:39.34 | jblack | creams his pants |
| 20:39.44 | Katty | hands jblack the shop towels. |
| 20:40.10 | jerris[1] | jblack: The propeller has its own language called "spin". It's a cross between basic, c, and a few other languages. |
| 20:40.14 | Naikrovek | howcome you creamed yer pantses |
| 20:40.29 | Naikrovek | arduino is nice because that language is very C/Java like |
| 20:40.30 | jblack | Naikrovek: that propeller chip is 8 processors on one chip. |
| 20:40.40 | Naikrovek | jblack: oooOOOoohh |
| 20:40.42 | Naikrovek | nice |
| 20:40.57 | jblack | For 8 bucks |
| 20:40.59 | Katty | i'll take two. |
| 20:41.01 | Naikrovek | no kiddin |
| 20:41.02 | jerris[1] | only 80 mHz a piece. But still pretty hardcore. |
| 20:41.02 | Naikrovek | wow |
| 20:41.11 | jerris[1] | You guys never seen this chip, eh? |
| 20:41.12 | Naikrovek | arduino is 16mhz |
| 20:41.13 | Naikrovek | or maybe 20 |
| 20:41.20 | *** join/#asterisk elred_ (~elred_@unaffiliated/elred-/x-5010831) |
| 20:41.22 | Naikrovek | jerris[1]: heard of it, but dorky name, so ignored |
| 20:41.27 | Naikrovek | perhaps will take another look |
| 20:41.47 | jerris[1] | So, this guy takes the arduino or a pic and puts a propeller chip on the same board to act as a media co-processor. |
| 20:42.04 | jerris[1] | Instant Multi-media capabilities. |
| 20:42.20 | jblack | only 32k of ram for the 8 processors? That seems kinda. slim |
| 20:42.44 | jerris[1] | They're looking to boost it in the next round of design. |
| 20:43.07 | jerris[1] | It's still a pretty ingeneous design. |
| 20:43.14 | jblack | plust whatever "Cog RAM: 512 x 32 bits each" means |
| 20:43.27 | jblack | Yeah. That's frigging incredible. |
| 20:43.33 | jerris[1] | Each processor has it's own individual RAM. |
| 20:43.45 | VoIP-Penguin | its own |
| 20:43.49 | jerris[1] | Then the shared RAM is 32k. |
| 20:44.14 | jerris[1] | That's enough to process whatever you want then store the rest on an SD card. |
| 20:44.29 | jerris[1] | Instant pocket sized mini-computer. |
| 20:44.45 | jblack | I figured that aspect out, but I don't know what "512 x 32 bits" means. I suppose that's 512*(32/8) bytes per processor, or 2K of ram |
| 20:44.53 | Naikrovek | 32k is incredibly huge for a microprocessor like that |
| 20:45.05 | jblack | Naikrovek: With 8 processors? |
| 20:45.26 | Naikrovek | think so |
| 20:45.31 | Naikrovek | is not a microcontroller expert |
| 20:45.41 | jblack | 20mhz * 8 = 160mhz of processor power. What do you do with 32k of ram with that sort of power... |
| 20:45.45 | jerris[1] | Well, you don't really see many devices like this with 8 processors. lol |
| 20:45.51 | jblack | man I bet thing gets warm |
| 20:46.04 | jerris[1] | Naw, not too bad. |
| 20:46.14 | Naikrovek | the way microprocessors do things doesn't require a lot of ram, because rom is also very fast |
| 20:46.33 | Naikrovek | you dont' need to load a program into memory to make it perform, you just read it from rom |
| 20:47.14 | jerris[1] | At any rate, I love my Chameleon |
| 20:47.21 | jblack | 32 io pins.. that's easily enough for a few flash devices. |
| 20:47.21 | jerris[1] | I got the PIC-16 version. |
| 20:48.01 | jblack | Naikrovek: Lets put this simpler.. this thing has less shared ram than a commodore 64, and 120 times the processing power.\ |
| 20:48.34 | Naikrovek | jblack: it's enough for most things, i'm sure of it |
| 20:48.37 | jerris[1] | Yes, but could you buy a commodore 64 for 8 bucks? :) |
| 20:48.45 | jerris[1] | Well, maybe now you can. |
| 20:48.53 | jerris[1] | Haven't checked ebay lately. |
| 20:49.37 | patrb | I've been using arduino..just got a prop board recently to try out |
| 20:49.51 | patrb | arduino has been great to learn on |
| 20:49.56 | Naikrovek | i seem to remember a microcontroller that spoke java bytecodes natively |
| 20:49.57 | jblack | nothing says you need to use all 8 80mhz processors (so actually 640mhz combined) |
| 20:50.13 | florz | millihulps? |
| 20:50.18 | florz | erm |
| 20:50.19 | florz | millihulpz? |
| 20:50.43 | jerris[1] | Anybody got any suggestions on resources for circuit design? |
| 20:51.02 | jerris[1] | Besides bitme? :) |
| 20:51.10 | patrb | join a local hacker club if your area has one |
| 20:51.34 | patrb | thats the best resource |
| 20:51.43 | *** join/#asterisk citywok (~chatzilla@67-134-194-33.dia.static.qwest.net) |
| 20:51.50 | jerris[1] | I looked around for a good Electrical Engineering group, but couldn't find anything. |
| 20:52.00 | patrb | what city are you in? |
| 20:52.05 | jerris[1] | SLC. |
| 20:52.09 | jerris[1] | Salt Lake. |
| 20:52.12 | [TK]D-Fender | checkout time, later all |
| 20:52.29 | Naikrovek | jerris[1]: i work with about 80Ees |
| 20:52.31 | Naikrovek | EEs |
| 20:52.44 | Naikrovek | very interesting conversations |
| 20:52.46 | jerris[1] | Well, that helps. :) |
| 20:53.12 | jerris[1] | Don't really have those resources. Considering I'm the sys admin, network admin, and apparently now the phone guy too. |
| 20:53.24 | Naikrovek | yeah i'm all three of those as well |
| 20:53.42 | jerris[1] | Well, hell. I just need to talk our company to pick up a few EEs then. ;) |
| 20:54.09 | jerris[1] | Considering we're a software company, don't know how that'll go over. |
| 20:54.32 | Naikrovek | we're a software company too, but we write software for electronic control modules for diesel engines |
| 20:54.43 | *** join/#asterisk KavanS (~KavanS@static-173-50-141-22.ptldor.fios.verizon.net) |
| 20:55.00 | Naikrovek | so we gotta know the CAN network, how to wire into it and stuff. we design hardware to go into CAN networks, etc |
| 20:55.04 | Naikrovek | crazy stuff |
| 20:55.19 | jerris[1] | fun fun. |
| 20:55.34 | *** part/#asterisk rttrey (~trey@209.208.18.121) |
| 20:58.03 | jblack | hugs jerris[1] |
| 20:58.38 | jerris[1] | like it, eh? |
| 20:59.14 | *** join/#asterisk war9407 (war@liquidswords.org) |
| 21:00.46 | Naikrovek | wow |
| 21:00.51 | Naikrovek | i didn't peg jblack as the hugging type |
| 21:01.00 | Naikrovek | i guess i caught you on a bad day that time |
| 21:01.26 | Naikrovek | that was more of a stab-you-in-the-throat day for you i think |
| 21:01.51 | patrb | lol, i think there a few personalities in this channel that have a lot of those days |
| 21:01.59 | jblack | jerris[1]: Yeah. The propellor manual even shows how to hook up a 256K eeprom |
| 21:02.12 | citywok | in a blind transfer i get all of the channel variables passed through from the original call. in an attended transfer i do not, and i do not get a seperate CDR entry for the second leg of the call. is there a way to solve this? |
| 21:02.41 | citywok | the original call leg actually gets credit for the full length of the call, even after they've connected lines 1 & 2 together and backed out of it |
| 21:02.46 | jblack | Naikrovek: Sometimes I hug. Sometimes I stab in the throat. Sometimes I hug someone after stabbing them in the throat. Other times, I stab people in the throat for hugging me. |
| 21:02.57 | Naikrovek | jblack: i'm gathering that |
| 21:03.20 | Naikrovek | diversity is good |
| 21:03.32 | jblack | I'm very predictible though, if you know the local temperature, humdidity, my blood glucose level, recent sleep pattens, bank balance and sunspot activity |
| 21:03.36 | citywok | here is what the channel looks like after trasnferring it. http://pastebin.com/xh95t0nF |
| 21:04.07 | jblack | Man. I gotta make soemthing with this shit. |
| 21:05.10 | jblack | One thing about that propellor. I somehow doubt g++ has that architecture as a target. |
| 21:05.35 | *** join/#asterisk doctorray (~ray@static-71-177-137-76.lsanca.fios.verizon.net) |
| 21:06.02 | doctorray | anyone around who might be able to field a simple polycom question? |
| 21:06.11 | jdoe | not if you don't ask it, no. |
| 21:06.19 | Naikrovek | doctorray: yes. ask |
| 21:06.25 | doctorray | I've got the administrator guide printed in a 3 ring binder in front of me, and I've read through most of it, |
| 21:06.37 | Naikrovek | aaaaaaaaaaassssssskkkkkkkkk |
| 21:06.40 | jdoe | haha. |
| 21:06.51 | Naikrovek | about to leave |
| 21:06.51 | doctorray | I'm typing... one sec :) |
| 21:06.54 | Naikrovek | :) |
| 21:07.28 | doctorray | I'm looking to map the extra line keys to other features, such as BLF or Call Park.. I think I've got the underlying programming down, but can't seem to find anything about actually making it show up on the phone's line key |
| 21:07.43 | Naikrovek | on the line key? |
| 21:07.46 | Naikrovek | or soft key |
| 21:08.04 | doctorray | line key. it's in a bunch of screenshots of the phone in the admin guide |
| 21:08.15 | doctorray | though I will fall back to soft key if that's only available with Polycom's server software license |
| 21:08.23 | jblack | jerris[1]: Oh man, the propellor dev tools are not only not on linux, but aren't even free software? |
| 21:08.37 | Naikrovek | polycom has a doc on using the phoens with asterisk, in it they show how to do things like create a soft key to park. never tried it with a line key though i guess it's possible |
| 21:08.48 | doctorray | also, the technical bulletin that talks about enhanced feature keys reference a "EFK-softkey1.cfg" that I can't seem to find online anywhere |
| 21:08.51 | jerris[1] | jblack: yeah, sorry 'bout that. |
| 21:08.57 | Naikrovek | doctorray: yeah i can't find that file either |
| 21:09.04 | jerris[1] | jblack: they may open source it at some point. |
| 21:09.07 | Naikrovek | doctorray: looked for quite some time a couple weeks back |
| 21:09.15 | jblack | Let me know if they ever open up? |
| 21:09.21 | doctorray | Naikrovek: I also want to program a sidecar expansion on a 650 to be BLF/speed dial, so I suppose if I found instructions on that somewhere I could figure the rest out |
| 21:09.31 | Naikrovek | doctorray: that part is easy |
| 21:09.44 | Naikrovek | doctorray: eeeeasy |
| 21:09.48 | doctorray | is it in the admin guide and I'm blind? |
| 21:10.08 | Naikrovek | it's so simple it doesn't need to be in the admin guide. it might be in the user guide though |
| 21:10.12 | jblack | I'm guessing that chameleon is no good to me either. :( |
| 21:10.26 | jerris[1] | In what way? |
| 21:10.36 | Naikrovek | doctorray: create a contact. modify the contact, turn "buddy watch" on. observe it show up on the sidecar |
| 21:10.37 | jerris[1] | All it's schematics are there. |
| 21:10.53 | doctorray | Naikrovek: best done through phone interface, or can it be done through provisioning server files? |
| 21:11.09 | jblack | well, it's got a propellor chip in it |
| 21:11.14 | jerris[1] | You're just limited on some of the propeller stuff. The rest of it is standard PIC or arduino. |
| 21:11.17 | jblack | So I'm thinking I can't make code for it. |
| 21:11.21 | Naikrovek | doctorray: oh, you have to give it a speed dial to make it work, but you can do it via the phone or via the contact file for the phone |
| 21:11.28 | jerris[1] | Oh, sure you can. |
| 21:11.42 | jerris[1] | Only the dev tools aren't open. |
| 21:11.56 | jerris[1] | But they're free to download. |
| 21:12.22 | Naikrovek | doctorray: if you want the BLF and speeddial to work only on the sidecar, make sure the other line keys on the phone are used for other things |
| 21:12.26 | Naikrovek | else those will get used |
| 21:12.30 | Naikrovek | easy peasy |
| 21:12.39 | Naikrovek | easy as a bread sandwich |
| 21:12.47 | Katty | ^- yum. |
| 21:12.49 | jblack | jerris[1]: huh? the arduino works with g++, so shouldn't the chameleon? |
| 21:12.50 | doctorray | right |
| 21:12.55 | jerris[1] | Use WINE and you're good to go. |
| 21:13.06 | Naikrovek | leaves |
| 21:13.09 | Katty | :< |
| 21:13.28 | jerris[1] | It will for the arduino portion. Then you use the SPI to talk to the propeller. |
| 21:13.44 | jerris[1] | onboard SPI link. |
| 21:14.28 | *** join/#asterisk chilicuil (~chilicuil@unaffiliated/chilicuil) |
| 21:14.52 | *** join/#asterisk [TK]D-Fender (~chatzilla@64.235.218.194) |
| 21:16.33 | *** join/#asterisk a1fa (~a1fa@unaffiliated/a1fa) |
| 21:17.03 | Katty | hi fender |
| 21:17.03 | a1fa | hello.. i have two DID one one SIP account |
| 21:17.24 | a1fa | i'd like to move each call to a different section, based on destination DID |
| 21:17.39 | [TK]D-Fender | Katty: \o/ |
| 21:18.08 | a1fa | 3o3 |
| 21:19.45 | VoIP-Penguin | a1fa: That's what extensions.conf is for. |
| 21:19.45 | a1fa | ah hell |
| 21:19.59 | a1fa | VoIP-Penguin : broadvoice does not destinguish between dids |
| 21:20.10 | a1fa | they all come in as primary DID |
| 21:20.14 | [TK]D-Fender | a1fa: it does. Look closer |
| 21:20.14 | VoIP-Penguin | Time to get a better provider. |
| 21:20.33 | VoIP-Penguin | a1fa: The provider should send the phone number along with the call, then you just match extensions and do things with each. |
| 21:21.14 | a1fa | it sends the primary number only |
| 21:21.26 | VoIP-Penguin | Ask them to fix it. |
| 21:21.29 | a1fa | LOL |
| 21:21.35 | a1fa | its like asking a deadhorse to get up |
| 21:22.01 | Slugs_ | you can still beat it though |
| 21:22.07 | VoIP-Penguin | Maybe, but they have the ability to fix their incorrect configuration, where the dead horse probably can't get up. |
| 21:23.19 | a1fa | [TK]D-Fender : what am I looking for? |
| 21:23.20 | [TK]D-Fender | VoIP-Penguin: Broadvoice is fine |
| 21:23.26 | [TK]D-Fender | a1fa: SIP DEBUG |
| 21:23.30 | a1fa | oh i did |
| 21:23.35 | VoIP-Penguin | [tk]d-fender: Oh, so it's a1fa. Got it. |
| 21:23.43 | a1fa | -- Executing [501XXXXXX@from-broadvoice:1] |
| 21:23.57 | a1fa | even after i dialed 1-866 DID |
| 21:24.06 | a1fa | i got from broadvoice |
| 21:24.07 | VoIP-Penguin | That looks more like core verbose output than sip debug. |
| 21:24.38 | [TK]D-Fender | a1fa: SIP DEBUG |
| 21:25.01 | jerris[1] | I'm bailing... (not hay) |
| 21:25.06 | jerris[1] | peace. |
| 21:25.18 | marienz | aww, looks like this softphone idea of mine isn't going to work because of some usb-level issue with the system I wanted to use for this |
| 21:25.44 | *** join/#asterisk anthm (~anthm@freeswitch/developer/anthm) |
| 21:27.15 | a1fa | [TK]D-Fender : same thing |
| 21:27.44 | [TK]D-Fender | a1fa: SIP DEBUG |
| 21:27.53 | VoIP-Penguin | lol |
| 21:28.04 | VoIP-Penguin | ~pb |
| 21:28.04 | infobot | [~pb] A "pastebin" is a web-based service where you should paste anything over 3 lines so you don't flood the channel. Here are links to a few : http://www.pastebin.com , http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org , http://bin.cakephp.org/ , http://asterisk.pastey.net/ , or install pastebinit with yum or aptitude. |
| 21:28.24 | a1fa | [TK]D-Fender : no.. i am looking at debug captures |
| 21:28.54 | a1fa | i never see the destination DID, except the primary number associated with broadvoice |
| 21:29.11 | [TK]D-Fender | a1fa: Know what I see so far? |
| 21:29.19 | VoIP-Penguin | NADA! |
| 21:29.35 | a1fa | ;( |
| 21:29.39 | [TK]D-Fender | ~wmmfpb |
| 21:29.40 | infobot | [~wmmfpb] WHERE'S MY MOTHER-^%#ING PASTEBIN?!? |
| 21:29.44 | [TK]D-Fender | :D |
| 21:29.53 | Qwell | WW[TK]D? |
| 21:30.26 | [TK]D-Fender | Qwell: Parse fail on that one.... |
| 21:30.48 | a1fa | D-Fender.. its a lot of crap to paste.. i've tried to search within the debug, and its not there |
| 21:31.36 | [TK]D-Fender | a1fa: You know... if you knew what you were doing... it'd be working already. Clearly your eyes aren't cutting it at this point. |
| 21:31.46 | a1fa | It always show the original and primary number for broadvoice |
| 21:31.53 | [TK]D-Fender | a1fa: And "a lot of crap" really doesn't ge you any further along |
| 21:32.39 | a1fa | ok.. i am looking at SIP INVITE |
| 21:32.58 | Kobaz | a1fa: here's the usual progression: 1) help i have a problem 2) but i don't need to paste, all i see is XXX 3) three hours go by 4) person finally pastes the logs 5) someone in #asterisk fixes the problem |
| 21:33.17 | Kobaz | a1fa: lets skip step 3... and just paste your damn log |
| 21:33.38 | Slugs_ | ~pb |
| 21:33.39 | infobot | [~pb] A "pastebin" is a web-based service where you should paste anything over 3 lines so you don't flood the channel. Here are links to a few : http://www.pastebin.com , http://pastebin.ca , http://channels.debian.net/paste , http://paste.lisp.org , http://bin.cakephp.org/ , http://asterisk.pastey.net/ , or install pastebinit with yum or aptitude. |
| 21:33.40 | a1fa | fine |
| 21:34.10 | [TK]D-Fender | a1fa: Say.... who helped you get started with * all those years ago? |
| 21:34.39 | a1fa | D-Fender |
| 21:34.52 | [TK]D-Fender | a1fa: You should listen to that guy! |
| 21:35.03 | a1fa | I do.. and I have looked at debug logs, and its not there |
| 21:35.29 | Kobaz | a1fa: we're not asking for logs to be annoying... hardly ever is it the case that logs are not helpful... usually within minutes of someone looking, they can spot the problem |
| 21:35.35 | VoIP-Penguin | kobaz: The hours are still progressing. You did make an honest attempt, though. |
| 21:35.42 | Kobaz | VoIP-Penguin: heh |
| 21:35.56 | [TK]D-Fender | a1fa: I'm gonna get... terse ... in a sec if you don't liven up boy... |
| 21:36.03 | [TK]D-Fender | reaches for his ClueBat (tm) |
| 21:36.07 | Kobaz | VoIP-Penguin: seriously... there was a guy in here last week who refused to paste his logs |
| 21:36.27 | Slugs_ | prob me |
| 21:36.29 | [TK]D-Fender | Kobaz: There's multple guys in here EVERY week with that approach |
| 21:36.36 | Kobaz | VoIP-Penguin: he was here all day long... starting around 10am.... he pasted his logs at like 3pm, and i helped him fix his problem within minutes |
| 21:36.45 | VoIP-Penguin | kobaz: I don't doubt it one bit. The end user with the problem ALWAYS knows better than anyone else! |
| 21:36.46 | Kobaz | Slugs_: :P |
| 21:37.01 | Slugs_ | ;0 |
| 21:38.18 | Kobaz | VoIP-Penguin: sometimes the end user does know better though... ie: time warner tech support |
| 21:38.26 | VoIP-Penguin | hahaha |
| 21:38.30 | Qwell | [TK]D-Fender: What Would (you) Do? |
| 21:38.30 | VoIP-Penguin | Good point. |
| 21:38.49 | a1fa | too much sensitive crap in the log to be posting on the internet, D-Fender, do you mind if I change some stuff? |
| 21:38.53 | Kobaz | no, i'm not using windows.... yes, i'm getting a dhcp address.... no the modem is not on fire... no, rebooting will not fix the problem... yes, your router is down.... no, i don't use windows |
| 21:39.09 | VoIP-Penguin | But it's not just Time Warner... it's a LOT of companies' tech support teams. |
| 21:39.23 | [TK]D-Fender | a1fa: Yes. See PM |
| 21:39.26 | Kobaz | a1fa: take out passwords and phone numbers you dont want people to see... but make them still look like passwords and phone numbers... don't replace a phone number with foobarbaz |
| 21:40.06 | VoIP-Penguin | Preferably, just hide passwords... since the phone number IS pertinent. |
| 21:40.41 | Kobaz | 5551231234 isn't much different than 2125551231234 |
| 21:40.44 | Kobaz | as long as everything matches |
| 21:41.13 | VoIP-Penguin | If they consistently change the phone number in every possible instance, sure... but that is often a problem. |
| 21:41.16 | Kobaz | it depends what the issue is really, whether the phone number is important |
| 21:41.25 | VoIP-Penguin | It's usually important. |
| 21:44.01 | Kobaz | we should make april 1st to be national bug free day |
| 21:44.16 | VoIP-Penguin | We could, but it would be a big joke! |
| 21:44.28 | Kobaz | where from january to that date, everyone works 80 hours a week ot make sure their programs have no bugs by april |
| 21:44.40 | Qwell | Kobaz: it's already March 22nd. |
| 21:44.43 | Kobaz | i know :( |
| 21:44.47 | Qwell | SO... time to start working non-stop |
| 21:44.51 | Kobaz | heh |
| 21:45.00 | Qwell | Kobaz: congratulations, you're now an Asterisk bug marshal. ;) |
| 21:45.04 | Kobaz | uh oh |
| 21:45.16 | Qwell | backfired :p |
| 21:47.36 | Kobaz | i've been slacking in finding new bugs lately |
| 21:47.44 | Kobaz | although i did find one in 0.26 |
| 21:49.35 | *** join/#asterisk wart___ (~peterjh@cpe-67-243-58-30.nyc.res.rr.com) |
| 21:50.13 | wart___ | hi folks. this probably is super-naive but i've spent a few hours working through the documentation. i have a simple asterisk server on my gentoo box and an account via inphonex.com so i can make pc-to-phone calls. |
| 21:50.47 | wart___ | so i have linphonec and pjsua clients (and ekiga and others like that); andd i have asterisk configured, so how do i actually make the phone caall? |
| 21:51.04 | wart___ | linphonec and pjsua both complaint that the relevant port is in use when i have asterisk running |
| 21:51.13 | wart___ | is there a commandline switch to get asterisk to send the call? |
| 21:51.15 | Qwell | wart___: tell them to not use port 5060 |
| 21:51.29 | wart___ | i dont own any other machine, so i'll need to call from the same machine which has astterisk running |
| 21:51.36 | wart___ | Qwell: ok i'll give that a try |
| 21:51.45 | Qwell | (them = the softphones) |
| 21:52.16 | wart___ | and have them point to the 127.0.0.1 then? |
| 21:53.24 | wart___ | ok now they launch, now i need to configure the softphones i take it to talk to my asterisk server? |
| 21:53.39 | wart___ | or isn't there a way to just tell asterisk to make the outbound call itself? |
| 21:53.43 | wart___ | and bypass these softpones? |
| 21:54.16 | *** join/#asterisk bsaxon (~bsaxon@12.68.234.174) |
| 21:54.17 | Slugs_ | originate? |
| 21:55.37 | Slugs_ | http://www.voip-info.org/wiki/view/Asterisk+cli+originate |
| 21:56.55 | VoIP-Penguin | Yes, that will do it. |
| 21:57.08 | VoIP-Penguin | As long as you form the command correctly, obviously. |
| 21:57.15 | [TK]D-Fender | wart___: Why would * call out all by itself? To what end? |
| 21:58.03 | wart___ | hmm originate isn't part of the asterisk ebuild. |
| 21:58.04 | carrar | It's Alive! |
| 21:58.39 | VoIP-Penguin | originate SIP/itsp-peer/13149691077 application playback activated |
| 21:58.53 | wart___ | [TK]D-Fender: Well, i want to connect to inphonex.com via the IAX protocal (eventually) and I also want to be able to make outgoing calls without using a gui softphone. |
| 21:59.29 | wart___ | the extant CLI softphones (linphonec and pjsua) are pretty buggy. |
| 21:59.44 | wart___ | Please do correct me if I'm barking up the wrong tree. |
| 22:00.08 | [TK]D-Fender | wart___: So far this is NOT Asterisk calling out all by itself. Youa re still placing a call with a client to * and THEN * calls out. |
| 22:00.09 | wart___ | I figured cutting maintaining an asterisk server would be accomplish what I want. |
| 22:00.29 | wart___ | s/cutting// |
| 22:00.51 | wart___ | woah, infobot is great. |
| 22:00.55 | wart___ | s/woah// |
| 22:01.06 | wart___ | :-) |
| 22:01.20 | VoIP-Penguin | Now just brush up on your expressions, and you'll be good to go. |
| 22:01.23 | [TK]D-Fender | ~infobot |
| 22:01.24 | infobot | somebody said infobot was The coolest, or a decepticon |
| 22:01.30 | [TK]D-Fender | ... |
| 22:01.41 | a1fa | d-fender, thanks |
| 22:02.03 | a1fa | thievs over at bv require new accounts for new dids |
| 22:02.13 | [TK]D-Fender | ~infobot |
| 22:02.14 | infobot | i heard infobot is a hack!, or known to have only said one useful thing. a tool, or dating the fembots, or [TK]D-Fender's b*tch, or suck, or a pain in the ass |
| 22:02.41 | [TK]D-Fender | MAH BITCH! |
| 22:02.48 | a1fa | ~whut |
| 22:02.49 | infobot | it has been said that whut is the matrix You a redneck, son? |
| 22:03.14 | a1fa | [TK]D-Fender : did i tell you i had a breach on my *? |
| 22:03.38 | [TK]D-Fender | a1fa: Yeah... some numbskull move like not setting PW's |
| 22:03.49 | a1fa | i was doing 3g+SIP and had a debug user with no password.. some crackhead managed to dial out 100+ numbers |
| 22:03.57 | a1fa | and got some lady to punch her cc into the IVR |
| 22:04.41 | a1fa | $6 worth of damages to me |
| 22:04.58 | Slugs_ | how much for her? |
| 22:04.59 | Slugs_ | ;0 |
| 22:05.01 | a1fa | dont know |
| 22:05.03 | VoIP-Penguin | Damn, VoIP is so expensive! |
| 22:05.03 | a1fa | didnt ask |
| 22:05.32 | a1fa | anyway, * needs to say unknown extension even when password is bad |
| 22:05.36 | *** join/#asterisk uqlev (~yuriy@91.184.221.31) |
| 22:05.47 | a1fa | or you need to have such flexibility to enable that |
| 22:06.04 | VoIP-Penguin | Why would it say "unknown extension" if a password is bad? |
| 22:06.14 | VoIP-Penguin | Wouldn't it say unknown device or something similar? |
| 22:06.22 | a1fa | ok |
| 22:06.45 | VoIP-Penguin | And it can do that if you configure it. |
| 22:07.06 | a1fa | <PROTECTED> |
| 22:07.11 | VoIP-Penguin | alwaysauthreject = yes |
| 22:07.13 | a1fa | even if password is pad |
| 22:07.20 | Micc__ | When I do sip show channelstats I see a lot of channels that have lost recv packets. Is that normal? |
| 22:07.46 | VoIP-Penguin | This option does exactly what you're asking about. |
| 22:07.51 | a1fa | :P |
| 22:07.55 | a1fa | Penguin, thanks |
| 22:07.58 | a1fa | just what i ened |
| 22:08.06 | Micc__ | http://pastebin.ca/1849718 |
| 22:08.34 | Micc__ | I'm running 1.6.1.18, channelstats seem off to me. |
| 22:09.28 | Micc__ | It only seems off for sip trunks though. regular peers seem fine. |
| 22:10.04 | hardwire | sigh.. I'm totally not understanding some dialplan stuffs |
| 22:10.10 | Micc__ | Maybe its counting lost packets against other channels on same ip. |
| 22:10.23 | hardwire | exten => _X.,n,Set(LOCAL(mbx)="${ext}"$["${cntx}"?"@${cntx}"::""]) turns into "LOCAL(mbx)="0055"""" |
| 22:11.00 | a1fa | [TK]D-Fender : thanks, as awlays.. |
| 22:11.08 | a1fa | VoIP-Penguin : thanks for the tip, as well |
| 22:11.20 | citywok | i've got a call with 25% loss according to channelstats and the user says no call quality issues have been noticed |
| 22:11.40 | Micc__ | citywok, yeah I haven't heard any complaints either. |
| 22:11.46 | citywok | and the sip peer is what shows that loss |
| 22:11.56 | [TK]D-Fender | a1fa: You're welcome. Next time... just provide the debug and background the FIRST time, ok? |
| 22:11.57 | citywok | but only for one aastra desk phone out of all of my current calls (30) |
| 22:12.11 | a1fa | [TK]D-Fender : ditto ;P |
| 22:12.26 | *** join/#asterisk arpu (~arpu@chello062178159144.10.14.univie.teleweb.at) |
| 22:15.07 | Slugs_ | hardwire, what is it supposed to turn into |
| 22:15.17 | ChannelZ | hardwire: what are you trying to make it do? the :: near the end seems wrong |
| 22:15.19 | *** join/#asterisk paulc (~paulc@unaffiliated/paulc) |
| 22:15.20 | hardwire | something with less '"'s |
| 22:15.37 | hardwire | ChannelZ: thats from the default dialplan distributed with asterisk 1.6 |
| 22:16.09 | hardwire | it's supposed to add a voicemail context to the end of the mbx variable if the variable cntx exists |
| 22:16.45 | hardwire | apparently the interpereter is being really literal.. because if I statically say Set(CDR(accountcode)="woot") it doesn't strip the '"'s |
| 22:17.17 | Kobaz | hardwire: the mbx tks the cntx frm th ast nd ds th dl |
| 22:17.29 | hardwire | Kobaz: figures |
| 22:17.33 | Kobaz | heh |
| 22:17.38 | ChannelZ | quotes are quotes now it seems |
| 22:18.01 | citywok | i'm having issues with CDR's and call trasnfers |
| 22:18.07 | citywok | is this just a suicide mission? |
| 22:18.13 | Kobaz | probably |
| 22:18.16 | *** part/#asterisk ehsjoar (~ehsjoar@c-98-245-155-132.hsd1.co.comcast.net) |
| 22:18.23 | Kobaz | it's really difficult to link cdr data together |
| 22:18.25 | citywok | i need it to not be a suicide mission. lol |
| 22:18.44 | Kobaz | i have bunches of custom code to do my own cdrs, so that it's sane |
| 22:18.46 | citywok | i need a CDR entry to be created for each leg of a call when a call is transferred from one agent to another |
| 22:19.21 | citywok | right now there is just one CDR, which has dstchannel as the first agent that answered |
| 22:19.25 | Kobaz | for anything other than straight call delivery, i find cdrs useless |
| 22:19.36 | citywok | if i do a blind xfer from my deks phone then it works great |
| 22:19.37 | Kobaz | citywok: you can use forkcdr() or something like that |
| 22:19.53 | citywok | if i do a redirect from AMI it is one CDR which has dstchannel as the second agent that answered |
| 22:20.04 | ChannelZ | huh... I guess :: is the right syntax, all this time I've been using one |
| 22:20.06 | citywok | Kobaz, how so? use forkcdr() at the beginning of the dial command on the context? |
| 22:20.13 | Kobaz | not sure, i haven't used it |
| 22:20.18 | Kobaz | but it might be of use |
| 22:20.48 | Kobaz | the thing is, i haven't found out if theres a way to tell if a new dial is the result of an attempted transfer or not |
| 22:20.59 | Kobaz | you don't know if the call is a transfer until it's actually transfered, which makes sense |
| 22:21.06 | hardwire | replaces with execif |
| 22:21.06 | citywok | yea, exactly |
| 22:21.18 | citywok | but whats the damage of doing forkcdr on a call initiated with no existing CDR? |
| 22:21.28 | citywok | you may end up with a blank dumb CDR, but oh well |
| 22:21.35 | Kobaz | that might work |
| 22:22.13 | citywok | and for me, everything that i parse CDR's with uses informatino that gets passed in to * manually via the actual dial command. the only time an agent ever dials their phone is for a tranfer, or an internal call |
| 22:22.39 | citywok | so forkcdr() would only run on an intenral call or a call transfer (again, internal only) |
| 22:22.55 | citywok | to transfer to an outside line they have to use their interface which uses the AMI to originate the call for them |
| 22:23.24 | citywok | i'll have to investigate this |
| 22:28.34 | hardwire | citywok: call ResetCDR(e) first? |
| 22:28.55 | hardwire | or check the code for forkcdr and see if it does the same thing |
| 22:29.14 | citywok | where do you see E as an option? |
| 22:29.30 | hardwire | core show application ResetCDR |
| 22:32.45 | citywok | okay so forkcdr() does cause the CDR to stop the first portion but it doesn't keep any of the channel variables |
| 22:32.49 | citywok | so i need to find that trick now |
| 22:33.24 | citywok | maybe i need resetcdr(v) |
| 22:37.19 | hardwire | forkcdr has a "keep variables" option |
| 22:38.29 | *** join/#asterisk CunningPike (~CunningPi@204.239.8.157) |
| 22:44.34 | citywok | i tried (v) and it didnt keep the cdr variables. gotta see if it keeps the other non-cdr variables |
| 22:47.46 | Slugs_ | originate <tech/data> application <appname> appdata |
| 22:48.10 | Slugs_ | afer application, can i use a function, like SayNumber() |
| 22:48.37 | citywok | hardwire: the channel variables dont stick, i think because the fork() is happening before the channels are bound together. |
| 22:49.04 | *** join/#asterisk leifmadsen (~Leif@asterisk/documenteur-extraordinaire/blitzrage) |
| 22:49.04 | *** mode/#asterisk [+o leifmadsen] by ChanServ |
| 22:49.06 | citywok | i think i could do this with a little bit of ASTDB trickery though |
| 22:49.42 | hardwire | wtf. why isn't the stock stdexten macro working anywhere near as well as it should |
| 22:50.02 | hardwire | _stdexten-. isn't matching stdexten-CHANUNAVAIL |
| 22:51.06 | *** join/#asterisk Get_The_Fish (~Get_The_F@c-24-8-50-199.hsd1.co.comcast.net) |
| 22:53.45 | VoIP-Penguin | Will x and n match 0-9 and 2-9, so you'll end up with stde[0-9]te[2-9]-morestuff? |
| 22:54.18 | Qwell | the lowercase shouldn't be matching |
| 22:54.35 | [TK]D-Fender | Qwell: should.... |
| 22:54.36 | Qwell | BUT! if it is, you can try _stde[x]te[n]-. |
| 22:54.42 | Qwell | which would be silly |
| 23:03.04 | *** join/#asterisk Slugs_ (Slugs_@c-76-97-205-31.hsd1.ga.comcast.net) |
| 23:06.16 | *** join/#asterisk aceio (~c2cbd7fe@gateway/web/freenode/x-jpkhpegbchyqjcgj) |
| 23:06.33 | *** join/#asterisk freezey (~trees@static-64-61-84-174.isp.broadviewnet.net) |
| 23:07.08 | freezey | hey i am getting all circuits are busy now when trying to make a call through dahdi... when i run dahdi show status the card comes up and the 2 ports being used show OK but when i run dahdi show channels nothing appears |
| 23:07.27 | *** join/#asterisk pyite (~dschreibe@unaffiliated/pyite) |
| 23:11.12 | *** join/#asterisk jaytee (~jforde051@unaffiliated/jaytee) |
| 23:15.18 | *** join/#asterisk sbrath (~sbrath@unaffiliated/sbrath) |
| 23:18.05 | sbrath | So I just had a wierd crash of 1.6.2 All the phones started flashing, and lost their connection to asterisk all at the same time, but I could still call into voicemail, MeetMe or Queues but when I call a # that dials a SIP/XXXX extension, the Channel gets dropped and I get a phone company message .... ?? I restarted asterisk and rebooted the phones, and now is all fine. |
| 23:18.21 | sbrath | Asterisk had been running for 2-3 weeks without a restart.... |
| 23:20.44 | Kobaz | sbrath: get a backtrace from the core file and post a bug report |
| 23:21.01 | VoIP-Penguin | sbrath: SIP/XXXX is not an extension; it is a channel tech and a device name. |
| 23:21.54 | Kobaz | sbrath: so you were still able to call in but got an error? if asterisk was still running that's not a crash |
| 23:21.59 | Kobaz | sounds like your network went down |
| 23:22.13 | *** join/#asterisk aidinb (~Aidin@66-214-227-203.dhcp.lnbh.ca.charter.com) |
| 23:23.38 | sbrath | You're right it's a TECH and device.... I was able to http into the phones, reboot them, and sip show peers showed everything as OK. |
| 23:24.44 | freezey | what could be the cause of dahdi show channels not returning any info? |
| 23:25.00 | Kobaz | dahdi isn't loaded |
| 23:25.04 | sbrath | If I called in, I saw my call progress thru caller id, and when id got to the Dial/4115: chan_dahdi.c: -- Channel 0/1, span 2 got hangup, cause 102 |
| 23:25.11 | Kobaz | well, not fully loaded (ie: not configured) |
| 23:25.20 | freezey | Kobaz: lsmod shows that it is loaded |
| 23:25.25 | sbrath | The call came in on T1 over a dahdi card. |
| 23:25.31 | Kobaz | freezey: not configured |
| 23:25.46 | freezey | Kobaz: dahdi show status shows the 2 lines that are connected as OK |
| 23:25.56 | sbrath | can just one part of asterisk freak out? and the rest work? |
| 23:25.58 | freezey | Kobaz: i am getting all circuits are busy |
| 23:26.01 | Kobaz | sbrath: sure |
| 23:26.25 | Kobaz | freezey: then it's not configured properly... you can paste your configs |
| 23:27.04 | Kobaz | sbrath: you can paste your full log |
| 23:27.22 | freezey | Kobaz: http://pastebin.ca/1849793 |
| 23:28.24 | Kobaz | and what's dahdi_cfg -vv say |
| 23:29.11 | freezey | http://pastebin.ca/1849796 |
| 23:30.20 | Kobaz | okay |
| 23:30.23 | sbrath | Kobaz: The full log is quite un-eventful, it looks just like a normal call but when it tried to hand the call to SIP/4115 I got this: -- Called 4115 |
| 23:30.34 | sbrath | and then: -- Channel 0/1, span 2 got hangup, cause 102 |
| 23:30.42 | Kobaz | and now do: module unload chan_dahdi.so |
| 23:30.48 | Kobaz | and then module load chan_dahdi.so |
| 23:30.48 | sbrath | then: Hungup 'DAHDI/25-1' |
| 23:30.50 | Kobaz | and paste the output |
| 23:30.52 | *** join/#asterisk KavanS (~KavanS@static-173-50-141-22.ptldor.fios.verizon.net) |
| 23:31.16 | Kobaz | sbrath: paste it anyway, there might be something useful |
| 23:31.25 | freezey | Kobaz: ok |
| 23:31.28 | *** join/#asterisk vader-- (~me@c-71-225-201-226.hsd1.nj.comcast.net) |
| 23:31.38 | freezey | Kobaz: ahh sick |
| 23:31.46 | freezey | they show up now |
| 23:31.57 | freezey | still get all circuits are busy but the channels show up now |
| 23:31.58 | Kobaz | did you change your config since initially loading asterisk? |
| 23:32.09 | Kobaz | or did you not run dahdi_cfg before running asterisk? |
| 23:32.19 | Kobaz | dahdi_cfg must be run on every boot or dahdi module load |
| 23:32.35 | freezey | yeah usually i load all modules then load asterisk |
| 23:32.37 | Kobaz | pri show spans |
| 23:32.47 | freezey | PRI span 1/0: Provisioned, Up, Active |
| 23:32.47 | freezey | PRI span 2/0: Provisioned, Up, Active |
| 23:32.56 | Kobaz | everything is good on your end then |
| 23:33.00 | Kobaz | no errors? about cpe/net etc? |
| 23:33.25 | Kobaz | pri intensive debug span 1 |
| 23:33.28 | freezey | i dont see any errors would you like to see the call log when it fails? |
| 23:33.31 | Kobaz | make a call, and paste that too |
| 23:35.03 | *** join/#asterisk fifer (~fifer@67.208.108.228) |
| 23:35.17 | freezey | Kobaz: http://pastebin.ca/1849802 |
| 23:37.48 | Kobaz | oh, maybe it's not so good on your end |
| 23:37.52 | freezey | haha |
| 23:37.59 | Kobaz | nothing is going out the pri when you're dialing |
| 23:38.19 | freezey | my trunk dial rules are 1+NXXNXXXXXX |
| 23:38.19 | freezey | 1NXXNXXXXXX |
| 23:38.19 | freezey | 011|. |
| 23:38.21 | voxter | I wonder if 888 voip store realizes that most voip companies wont be able to dial their phone number? |
| 23:38.22 | Kobaz | that's very weird |
| 23:38.23 | voxter | Idiots. |
| 23:38.28 | Kobaz | freezey: dialing rules aren't used |
| 23:38.32 | freezey | ok |
| 23:38.38 | freezey | so what could be stopping this? |
| 23:38.44 | Kobaz | it's failing at the dahdi level |
| 23:38.52 | Kobaz | your dialign rules are already processed by then |
| 23:38.57 | freezey | ok |
| 23:39.08 | freezey | where do you see it fail at the dahdi level? |
| 23:39.23 | Kobaz | <PROTECTED> |
| 23:39.26 | Kobaz | <PROTECTED> |
| 23:39.27 | freezey | yeah |
| 23:39.32 | freezey | thought that was it yeah |
| 23:39.33 | Kobaz | there is no pri debugging surrounding that |
| 23:39.33 | freezey | saw that |
| 23:39.50 | Kobaz | what's your /etc/asterisk/logger.conf |
| 23:40.08 | freezey | full => notice,warning,error,debug,verbose |
| 23:40.19 | Kobaz | just for sanity |
| 23:40.32 | Kobaz | add: console => notice,warning,error,verbose,debug |
| 23:40.48 | Kobaz | logger reload |
| 23:40.50 | Kobaz | and make a call again |
| 23:40.56 | Kobaz | what asterisk version? |
| 23:41.10 | Kobaz | something is horribly horribly wrong if you're not seeing anything on the pri when you do a dial |
| 23:41.14 | freezey | 1.4.24 |
| 23:41.26 | Kobaz | okay so you're not using something silly like trunk |
| 23:41.40 | *** join/#asterisk tankbusta (tankbusta@sslvpn.onlinetech.com) |
| 23:41.47 | freezey | http://pastebin.ca/1849813 |
| 23:41.51 | tankbusta | How long can a snapshot take? |
| 23:42.04 | leifmadsen | snapshot? |
| 23:42.08 | tankbusta | Backup |
| 23:42.13 | leifmadsen | of what? |
| 23:42.15 | tankbusta | Opps... |
| 23:42.16 | tankbusta | Hah |
| 23:42.18 | Kobaz | tankbusta: as long as you hold down the shutter button |
| 23:42.19 | tankbusta | Shoulda said what |
| 23:42.20 | tankbusta | lol |
| 23:42.23 | tankbusta | Druid OSE |
| 23:42.27 | leifmadsen | no idea |
| 23:42.31 | leifmadsen | this isn't #druid :) |
| 23:42.54 | tankbusta | :) hah |
| 23:43.01 | tankbusta | I've been here with druid questions |
| 23:43.03 | tankbusta | Oh well |
| 23:43.09 | Kobaz | what's a druid |
| 23:43.18 | Kobaz | other than those little pagan guys with hooded robes |
| 23:43.25 | jaytee | that worship trees |
| 23:43.28 | freezey | haha |
| 23:43.31 | tankbusta | lol |
| 23:43.31 | freezey | i hate druid man dam |
| 23:43.34 | leifmadsen | "A druid was a member of the priestly and learned class active in Gaul, and perhaps in Celtic culture more generally, during the final centuries BCE." |
| 23:43.34 | freezey | thats what i am moving off of |
| 23:44.01 | freezey | Kobaz: i see the dial plans work with no problem and verify then i just see it die with unkown |
| 23:44.05 | freezey | pastebin is up there |
| 23:44.26 | freezey | could it be the trunkoutcid? |
| 23:44.30 | freezey | that is causing the problem |
| 23:44.36 | tankbusta | I wish I had the choice of not using Druid -_- |
| 23:44.37 | freezey | but that is just a mask tho |
| 23:45.03 | Kobaz | freezey: and that's with pri debugging? |
| 23:45.09 | Kobaz | you didn't turn it off, did you |
| 23:45.12 | freezey | meh yeah |
| 23:45.13 | freezey | 1 sec hahaha |
| 23:46.19 | Kobaz | oh |
| 23:46.21 | Kobaz | i'm an idiot |
| 23:46.27 | Kobaz | group=63 |
| 23:46.27 | Kobaz | channel=>1-23 |
| 23:46.30 | freezey | http://pastebin.ca/1849817 |
| 23:46.31 | *** join/#asterisk Slugs_ (Slugs_@c-76-97-205-31.hsd1.ga.comcast.net) |
| 23:46.36 | Kobaz | change your dial string to use DAHDI/g63 |
| 23:46.40 | Kobaz | or change your group to 0 |
| 23:46.57 | freezey | and then reload dahdi again? |
| 23:47.08 | Kobaz | yeah |
| 23:47.11 | vader-- | anyone in here happen to work with adtran units? |
| 23:47.14 | freezey | the module way or service way? |
| 23:47.24 | Kobaz | probably would be easier to just change your dahdi.cfg group to 0 |
| 23:47.26 | Kobaz | for 1-23 |
| 23:47.31 | freezey | yeah just did |
| 23:47.45 | Kobaz | module reload chan_dahdi.so will reload the groups |
| 23:47.49 | Kobaz | there are several things you can' |
| 23:47.56 | Kobaz | can't change with a reload, but groups will change |
| 23:48.12 | Kobaz | this isn't freepbx or asterisknow is it |
| 23:48.20 | freezey | sweeeetttt |
| 23:48.21 | freezey | works |
| 23:48.25 | *** join/#asterisk DrGeek (~geek@c-24-21-244-173.hsd1.or.comcast.net) |
| 23:48.26 | DrGeek | g'day all |
| 23:48.29 | freezey | much appreciated |
| 23:48.31 | Kobaz | like i said... something was horribly wrong |
| 23:48.32 | Kobaz | heh |
| 23:48.45 | Kobaz | okay you can kill all the debugging |
| 23:48.58 | DrGeek | has anyone used the nethdlc DAHDI links for bonding multiple T1's? |
| 23:50.49 | freezey | Kobaz: now i remember using dundi.conf to do lookups towards a pbx sitting on another subnet and pass the extensions over that can still be used right? or is their another conf file for that now |
| 23:51.10 | Kobaz | i'm not familiar with dundi |
| 23:51.26 | freezey | Kobaz: now jsut the calls coming in says numbers not in service haha |
| 23:51.37 | Kobaz | asterisknow? |
| 23:51.48 | Kobaz | it looks like some sort of gui setup |
| 23:51.52 | freezey | which? |
| 23:51.56 | Kobaz | your setup |
| 23:52.06 | Kobaz | unless you've built it up yourself |
| 23:52.23 | freezey | yeah i had to remove the regular asterisk version and put a GUI on top so other people can create extensions... so ididnt have to show them how |
| 23:52.30 | freezey | easier for them |
| 23:52.38 | freezey | freepbx i think it is |
| 23:52.49 | Kobaz | no idea how to fix your routing problem |
| 23:52.57 | freezey | yeah that i have to figure out |
| 23:53.05 | Kobaz | freepbx shoves thousands of lines of custom stuff on top of asterisk |
| 23:53.11 | freezey | yup |
| 23:53.15 | freezey | its freaking messy |
| 23:54.29 | *** join/#asterisk bobisa (~bobisa@pppoe.66.234.20.171.dslqz.com) |
| 23:54.55 | *** part/#asterisk Get_The_Fish (~Get_The_F@c-24-8-50-199.hsd1.co.comcast.net) |
| 23:57.06 | bobisa | i have a questio about asterisk, there i web application for configuring asterisk or its all done by vi |
| 23:57.20 | Slugs_ | #freepbx |
| 23:57.40 | Slugs_ | web gui for asterisk |
| 23:57.54 | Slugs_ | ~freepbx |
| 23:57.55 | infobot | [~freepbx] FreePBX is unable to be supported here. It is made up of complex dialplans and scripts which can't be easily supported by people who aren't deeply involved. Try joining #freepbx and asking there, or fpbx |
| 23:57.56 | bobisa | it can configure everything with that ? |
| 23:57.59 | sbrath | the hard core people use vi, use asterisknow/elastix/ etc for a freepbx gui |
| 23:58.12 | Kobaz | vi is for wimps |
| 23:58.21 | Kobaz | the real hard core use dd and cat |
| 23:58.31 | sbrath | all I use is edlin |
| 23:58.32 | Slugs_ | bobisa, its not as flexable |
| 23:58.54 | Slugs_ | bobisa, depends on what your doing i guess |
| 23:59.10 | Kobaz | and vi is eh... jed is a much better lightweight editor |
| 23:59.15 | Kobaz | :P |
| 23:59.43 | Slugs_ | slaps Kobaz with vi bits |
| 23:59.54 | Kobaz | emacs ftw |